Optimization and molecular identification of novel cellulose degrading bacteria isolated from Egyptian environment

Isolation, screening and characterization of efficient cellulose-degrading fungal and bacterial strains and preparation of their consortium under in vitro studies

In this investigation, cellulose-degrading fungi and bacteria were isolated from different partially decomposed cellulose-rich substrates, such as groundnut residues, rice straw, and rotten wood, following dilution plating techniques on carboxymethyl cellulose agar media and screening for potential cellulose degradation ability. The development of a clear halo zone surrounding the microbial colonies during the initial screening process using the Congo red test (20 isolates) suggested cellulose hydrolysis, and the highest cellulase production activity was implied by the isolates with the largest clear zone ratio (9 isolates). Using both macroscopic and microscopic examinations, as well as standard biochemical tests outlined in Bergey's Manual of Determinative Bacteriology, the genus-level identification of fungi and bacteria was accomplished. In order to molecularly identify the 4 isolated fungal and bacterial strains at the species level after being ultimately selected for cellulase production potential under in vitro studies, fungal and bacterial DNA was extracted and amplified by PCR using the universal primers ITS1 and ITS4 for fungi (ITS rRNA, 5.8S rRNA) and 8F and 1492R for bacterial isolates (16S rRNA). After sequencing, the PCR results were compared to other comparable sequences in GenBank (NCBI). Based on the available NCBI data, phylogenetic analysis of their ribosomal gene partial sequences revealed that DAJ2 (PP086700) shares 100% homology with Aspergillus foetidus, DTJ4 (PP086699) shares 99.74% similarity with Trichoderma atrobrunnium, DBJ6 (PP082584) shares 100% identity with Priestia megaterium, and DMB9 (PP082585) shares 99.88% homology with Micrococcus yunnanensis. The cellulolytic potential of Phanerochaete chrysosporium is well established. Therefore, it was considered a standard culture for comparison and was collected from the MTCC, Chandigarh, India. Overall, all 4 selected isolates and the check organism were mutually compatible or synergistic with each other, and their consortium is useful for the accelerated decomposition of organic constituents during rapid composting.

Enhancement of cellulase production by cellulolytic bacteria SB125 in submerged fermentation medium and biochemical characterization of the enzyme

Microbial diversity from indigenous cultures has the potential to accelerate lignocellulose degradation through enzymes and make composting economically feasible. Therefore, this study is designed to boost cellulase output from a bacterial strain obtained from soil using a one-variable-at-a-time approach and response surface methodology. The bacteria recognized as Bacillus tequilensis (ON754229) produced the maximum cellulase at a temperature of 37 °C, pH -7.0, and incubation time of 72 h. A major contribution was anticipated by glucose (17 %) and ammonium sulfate (11 %) with cellulase activity of 0.56 U/mL in the optimized medium. The enzyme possessed activity of CMCase, FPase, and amylase of 0.589 μmol/min, 1.22 μmol/min, and 0.92 μmol/min respectively. SDS-PAGE showed a 65 kDa molecular weight of the enzyme capable of degrading cellulose, as confirmed by zymogram analysis. The enzyme showed relatively moderate thermo-stability towards neutral pH conditions possessing optimum conditions at pH 6.5 and temperature of 50 °C. The Km and Vmax values were 11.44 mM and 0.643 μmol/min respectively. The presence of MgSO4, ZnSO4, and Triton X- 100 increased the enzymatic reaction however AgNO3, EDTA, and HgCl2 altered the activation process. These results showed cellulase from B. tequilensis SB125 would be suitable for conventional industrial processes that convert biomass into biofuels.

Biocontrol rhizobacteria enhances growth and yield of wheat (Triticum aestivum) under field conditions against Fusarium oxysporum

The current study aimed to identify the survival of bio-control bacteria with antifungal activity against Fusarium oxysporum and assess their growth promoting activity in wheat crop field conditions. To evaluate the fungicidal activities of isolated bacteria using the dual culture method, both qualitative and quantitative bioassays were performed. Plant Growth Promoting activities such as Indole 3-Acetic Acid (IAA), phosphate solubilization, Hydrogen cyanide (HCN), and Siderophore production were assessed for three biocontrol bacterial isolates (BCB 07, BCB16, and BCB 83) out of 180 with 70% antagonistic activity against Fusarium oxysporum. Chitinase, protease, and cellulase interaction in isolates was also tested. BCB16 was selected as it had 70% antagonist activity against F. oxysporum but also had the highest PGPR (Plant Growth Promoting Rhizobacteria) traits when compared to the other two isolates. BCB16 was also tested for survival in talc powder and in wheat crop field conditions. Even after 4 months in talc powder, the survival rate remained stable. In a wheat crop field, BCB16 reduced the disease incidence of Fusarium oxysporum by 54.38%. When compared to fungus alone treatment, BCB16 increased average yield by 57% alone and 32% in challenged conditions. BCB16 was identified molecularly using the 16s rRNA gene. Bacillus amyloliquefaciens shared 97% of the deduced sequence. The sequence was submitted to genbank and assigned the accession number OM333889. Bacillus amyloliquefaciens has the potential to be used in the field as an alternative to synthetic fungicides against Fusarium oxysporum.

Enhancement effect of AgO nanoparticles on fermentative cellulase activity from thermophilic Bacillus subtilis Ag-PQ

BACKGROUND

Cellulase is an important bioprocessing enzyme used in various industries. This study was conducted with the aim of improving the biodegradation activity of cellulase obtained from the Bacillus subtilis AG-PQ strain. For this purpose, AgO and FeO NPs were fabricated using AgNO3 and FeSO4·7H2O salt respectively through a hydro-thermal method based on five major steps; selection of research-grade materials, optimization of temperature, pH, centrifuge, sample washed with distilled water, dry completely in the oven at the optimized temperature and finally ground for characterization. The synthesized NPs were characterized by scanning electron microscope (SEM), energy dispersive X-ray (EDX), and X-ray diffraction (XRD) to confirm the morphology, elemental composition, and structure of the sample respectively. The diameter of the NPs was recorded through SEM which lay in the range of 70-95 nm.

RESULTS

Cultural parameters were optimized to achieve better cellulase production, where incubation time of 56 h, inoculum size of 5%, 1% coconut cake, 0.43% ammonium nitrate, pH 8, and 37 °C temperature were found optimal. The enhancing effect of AgO NPs was observed on cellulase activity (57.804 U/ml/min) at 50 ppm concentration while FeO NPs exhibited an inhibitory effect on cellulase activity at all concentrations. Molecular docking analysis was also performed to understand the underlying mechanism of improved enzymatic activity by nanocatalysts.

CONCLUSION

This study authenticates AgO NPs as better nanocatalysts for improved thermostable cellulase biodegradation activity with the extraordinary capability to be potentially utilized in bioethanol production.

Characterization of Cellulose-Degrading Bacteria Isolated from Silkworm Excrement and Optimization of Its Cellulase Production

An abundance of refractory cellulose is the key limiting factor restricting the resource utilization efficiency of silkworm (Bombyx mori) excrement via composting. Screening for cellulose-degrading bacteria is likely to provide high-quality strains for the safe and rapid decomposition of silkworm excrement. In this study, bacteria capable of degrading cellulose with a high efficiency were isolated from silkworm excrement and the conditions for cellulase production were optimized. The strains were preliminarily screened via sodium carboxymethyl cellulose culture and staining with Congo red, rescreened via a filter paper enzyme activity test, and identified via morphological observation, physiological and biochemical tests, and phylogenetic analysis of the 16S rDNA sequence. Enzyme activity assay was performed using the 3,5-dinitrosalicylic acid method. DC-11, a highly cellulolytic strain, was identified as Bacillus subtilis. The optimum temperature and pH of this strain were 55 °C and 6, respectively, and the filter paper enzyme activity (FPase), endoglucanase activity (CMCase), and exoglucanase activity (CXase) reached 15.40 U/mL, 11.91 U/mL, and 20.61 U/mL. In addition, the cellulose degradation rate of the treatment group treated with DC-11 was 39.57% in the bioaugmentation test, which was significantly higher than that of the control group without DC-11 (10.01%). Strain DC-11 was shown to be an acid-resistant and heat-resistant cellulose-degrading strain, with high cellulase activity. This strain can exert a bioaugmentation effect on cellulose degradation and has the potential for use in preparing microbial inocula that can be applied for the safe and rapid composting of silkworm excrement.

Characterization of the biosurfactant production and enzymatic potential of bacteria isolated from an oil-contaminated saline soil

Biosurfactants are amphiphilic compounds with extensive applications in oily contaminated environments to remove hydrocarbons. Moreover, enzymes such as laccase and manganese peroxidase are responsible for the oxidation of a variety of phenolic compounds and aromatic amines. Therefore, in the present study, bacteria with the potential to produce biosurfactants and enzymes (namely, laccase, manganese peroxidase, and endoglucanase carboxymethyl cellulose (CMCase)) were isolated from petroleum oil-contaminated soil. From 15 isolated bacteria, three isolates were selected as the best producers of biosurfactants according to the related tests, such as tests for surface tension reduction. These three bacteria indicated tolerance to a salinity test and were classified as resistant and very resistant. The isolates 3, 12, 13, and 14 showed positive results for the degradation of guaiacol, phenol red, and carboxymethylcellulose, as well as the decoloration of methylene blue by the creation of a clear halo around the bacterial colony. Upon the quantitation of the laccase and manganese peroxidase activities, 22.58 U/L and 21.81 U/L, respectively, were measured by isolate 13. Furthermore, CMCase activity was recorded with 0.057436 U/ml belonging to isolate 14. Bacterial strains with appreciable laccase, peroxidase, CMCase activity, and biosurfactant production potentials were identified through 16S rDNA sequence analysis as Bacillus sp. (isolate 3), Bacillus toyonensis (isolate 12), Bacillus cereus (isolate 13), and Bacillus tropicus (isolate 14), and their nucleotide sequences were deposited in the GenBank. The potentials for the industrial applicability of the biosurfactants and enzymes abound, and production needs to be optimized by the selected bacterial strains.

Accelerated degradation of cellulose in silkworm excrement by the interaction of housefly larvae and cellulose-degrading bacteria

The environmental pollution caused by silkworm (Bombyx mori) excrement is prominent, and rich in refractory cellulose is the bottleneck restricting the efficient recycling of silkworm excrement. This study was performed to investigate the effects of housefly larvae vermicomposting on the biodegradation of cellulose in silkworm excrement. After six days, a 58.90% reduction of cellulose content in treatment groups was observed, which was significantly higher than 11.5% of the control groups without housefly larvae. Three cellulose-degrading bacterial strains were isolated from silkworm excrement, which were identified as Bacillus licheniformis, Bacillus amyloliquefaciens, and Bacillus subtilis based on 16S rRNA gene sequence analysis. These three bacterial stains had a high cellulose degradation index (HC value ranged to between 1.86 and 5.97 and FPase ranged from 5.07 U/mL to 7.31 U/mL). It was found that housefly larvae increased the abundance of cellulose-degrading bacterial genus (Bacillus and Pseudomonas) by regulating the external environmental conditions (temperature and pH). Carbohydrate metabolism was the bacterial communities' primary function during vermicomposting based on the PICRUSt. The results of Tax4Fun indicated that the abundance of endo-β-1,4-glucanase and exo-β-1,4-glucanase increased rapidly and maintained at a higher level in silkworm excrement due to the addition of housefly larvae, which contributed to the accelerated degradation of cellulose in silkworm excrement. The finding of this investigation showed that housefly larvae can significantly accelerate the degradation of cellulose in silkworm excrement by increasing the abundance of cellulose-degrading bacterial genera and cellulase.

Fundaments and Concepts on Screening of Microorganisms for Biotechnological Applications. Mini Review

Microbial biotechnology uses microorganisms and their derivatives to generate industrial and/or environmental products that impact daily life. Modern biotechnology uses proteomics, metabolomics, quantum processors, and massive sequencing methods to yield promising results with microorganisms. However, the fundamental concepts of microbial biotechnology focus on the specific search for microorganisms from natural sources and their correct analysis to implement large-scale processes. This mini-review focuses on the methods used for the isolation and selection of microorganisms with biotechnological potential to empathize the importance of these concepts in microbial biotechnology. In this work, a review of the state of the art in recent years on the selection and characterization of microorganisms with a basic approach to understanding the importance of fundamental concepts in the field of biotechnology was carried out. The proper selection of isolation sources and the design of suitable selection criteria according to the desired activity have generated substantial changes in the development of biotechnology for more than three decades. Some examples include Taq polymerase in the PCR method and CRISPR technology. The objective of this mini review is to establish general ideas for the screening of microorganisms based on basic concepts of biotechnology that are left aside in several articles and maintain the importance of the basic concepts that this implies in the development of modern biotechnology.

Screening of Cellulolytic Bacteria from Various Ecosystems and Their Cellulases Production under Multi-Stress Conditions

Cellulose represents the most abundant component of plant biomass on earth; it is degraded by cellulases, specific enzymes produced by microorganisms. However, cellulases of bacterial origin attract more interest due to their natural diversity and ability to inhabit a variety of niches, allowing the selection of cellulolytic strains resistant to environmental stresses. The screening of the cellulolytic activity of 398 bacteria isolated from various ecosystems in Algeria (cave, ruins, chott, thermal station, and rhizosphere of arid and semi-arid regions) was performed by the appearance of a hydrolysis zone on carboxymethylcellulose (CMC) medium. The cellulase activity on CMC (1%) broth allowed to select 26 strains among which 12 had the best activity (0.3 U/mL to 2.2 U/mL). Optimization of physicochemical parameters (salinity: 0–1 M NaCl; pH: 3, 4, 7, 9, and 11; temperature: 30, 45, and 50 °C; PEG8000: 0 and 30%) involved in growth and cellulose production showed that the majority of strains were mesophilic, neutrophilic, or alkali- tolerant and tolerant to 30% of PEG8000. The cellulase activity and stability under different stress allowed to retain five strains, which the most efficient. Based on the 16S-rRNA sequencing results, they belonged to the genus Bacillus. The physicochemical properties of cellulases (crude extract) showed a CMCase active over a wide range of pH (4 to 11), optimal at 50 °C and 60 °C. The inhibiting salinity effect on the activity was not detected and was negligible on the enzymatic stability. The residual CMCase activity remained between 40 and 70% in a temperature range between 40 and 70 °C, was stable over a wide range of saline concentrations (0–2000 mM), and was weakly affected at 30% of PEG8000. The crude enzyme extract was able to hydrolyze both soluble and insoluble cellulosic substrates. The evaluation of the hydrolysis capacity of lignocellulosic waste revealed the ability of tested strains to degrade wheat bran, barley bran, and corncob. In addition, the enzyme showed significant multi-stress resistance on solid and liquid media. By these characteristics, these cellulolytic bacteria could be attractive to be used in various industrial and biotechnology applications.

Characterization of Cellulose-Degrading Bacteria Isolated from Soil and the Optimization of Their Culture Conditions for Cellulase Production

The characterization of bacteria with hydrolytic potential significantly contributes to the industries. Six cellulose-degrading bacteria were isolated from mixture soil samples collected at Kingfisher Lake and the University of Manitoba campus by Congo red method using carboxymethyl cellulose agar medium and identified as Paenarthrobacter sp. MKAL1, Hymenobacter sp. MKAL2, Mycobacterium sp. MKAL3, Stenotrophomonas sp. MKAL4, Chryseobacterium sp. MKAL5, and Bacillus sp. MKAL6. Their cellulase production was optimized by controlling different environmental and nutritional factors such as pH, temperature, incubation period, substrate concentration, nitrogen, and carbon sources using the dinitrosalicylic acid and response surface methods. Except for Paenarthrobacter sp. MKAL1, all strains are motile. Only Bacillus sp. MKAL6 was non-salt-tolerant and showed gelatinase activity. Sucrose enhanced higher cellulase activity of 78.87 ± 4.71 to 190.30 ± 6.42 U/mL in these strains at their optimum pH (5-6) and temperature (35-40 °C). The molecular weights of these cellulases were about 25 kDa. These bacterial strains could be promising biocatalysts for converting cellulose into glucose for industrial purposes.

Cloning of cellulase gene using metagenomic approach of soils collected from Wadi El Natrun, an extremophilic desert valley in Egypt

Background

Wadi El Natrun microorganisms have been considered as a new resource for natural products due to its extreme condition of salinity and alkalinity. Therefore, this study was devoted to generate metagemic library from soils collected from such an extreme environment in order to clone a novel cellulase for physique industrial applications.

Results

Total soil-DNA was successfully extracted, and then digested by different restriction enzymes. Purified fragments ranged ~ 200–6500 bp were ligated and were cloned into plasmid cloning vector (pUC19) by using Escherichia coli DH5α (E. coli) host cells. A constructed metagenomic library composed of 270 clones was screened on carboxymethylcellulose (CMC) agar plate where the active clones had been characterized by the formation of the yellowish halo zone. Thereafter, clone 1 was selected as the most active as being based on cellulase activity quantification (19 μ/ml). Plasmid related to clone 1 encoded cellSNSY gene of approximately 1.5 kb was subjected to molecular characterization; the obtained partial sequence of 861 bps encoded 287 amino acids showing 76% similarity to the endoglucanase gene of Bacillus amyloliquefaciens. The recombinant cellSNSY was expressed under lacz promoter at 1 mM of isopropyl β-d-1-thiogalactopyranoside (IPTG), giving 21 μ/ml cellulase after ~ 27 h. Sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE) and an activity staining of the recombinant cellSNSY which revealed an active band with a molecular mass ~ 59 kDa appeared in the induced sample. The maximum enzyme activity of crude cellSNSY was observed at 45 °C and for a pH of 8.5. Interestingly, the enzyme activity was slightly inhibited by ethylenediamine tetraacetic acid (EDTA) and methanol. It showed high resistance to the tested heavy metals and the surfactant which ordered Zn> (SDS,Fe)>Mn>Cu.

Conclusions

This study established an easy and a skillful way to clone/express a new found cellulase gene(s) under lacZ promoter. The isolated recombinant cellSNSY showed 76% similarity to endoglucanase gene, and the enzyme showed tolerance to the mostly tested agents including heavy metals, surfactant, solvents, and EDTA. Additionally, the studied recombinant showed a high stability up to 55 °C and for alkaline pH 8.5. These features make it an ample and viable for many applications.

Assessing the impact of substrate-level enzyme regulations limiting ethanol titer in Clostridium thermocellum using a core kinetic model

Clostridium thermocellum is a promising candidate for consolidated bioprocessing because it can directly ferment cellulose to ethanol. Despite significant efforts, achieved yields and titers fall below industrially relevant targets. This implies that there still exist unknown enzymatic, regulatory, and/or possibly thermodynamic bottlenecks that can throttle back metabolic flow. By (i) elucidating internal metabolic fluxes in wild-type C. thermocellum grown on cellobiose via ¹³C-metabolic flux analysis (¹³C-MFA), (ii) parameterizing a core kinetic model, and (iii) subsequently deploying an ensemble-docking workflow for discovering substrate-level regulations, this paper aims to reveal some of these factors and expand our knowledgebase governing C. thermocellum metabolism. Generated ¹³C labeling data were used with ¹³C-MFA to generate a wild-type flux distribution for the metabolic network. Notably, flux elucidation through MFA alluded to serine generation via the mercaptopyruvate pathway. Using the elucidated flux distributions in conjunction with batch fermentation process yield data for various mutant strains, we constructed a kinetic model of C. thermocellum core metabolism (i.e. k-ctherm138). Subsequently, we used the parameterized kinetic model to explore the effect of removing substrate-level regulations on ethanol yield and titer. Upon exploring all possible simultaneous (up to four) regulation removals we identified combinations that lead to many-fold model predicted improvement in ethanol titer. In addition, by coupling a systematic method for identifying putative competitive inhibitory mechanisms using K-FIT kinetic parameterization with the ensemble-docking workflow, we flagged 67 putative substrate-level inhibition mechanisms across central carbon metabolism supported by both kinetic formalism and docking analysis.

Purification and Amplification of DNA from Cellulolytic Bacteria: Application for Biogas Production from Crop Residues

Polymerase chain reaction (PCR) is a popular molecular tool for detection of bacteria. PCR allows millions of copies of a target segment of DNA to be produced. The DNA is extracted from overnight grown cultures of pure bacterial isolates using either the organo-solvent method or a commercial DNA extraction kit. The quality and purity of the DNA is determined by performing gel electrophoresis on 0.8% agarose gel. The DNA is amplified by performing PCR assay. Bands of approximately 1.5 kb in size are obtained from the amplified products of DNA. The PCR products run on 1.5% agarose gel are visualized with UV light and imaged by gel documentation system. This chapter outlines the protocol for isolation and amplification of DNA from cellulolytic bacteria. Cellulolytic bacteria are considered a potential source of cellulases for pretreatment of crop residues during biogas production. PCR is considered a very powerful, sensitive, specific, fast, and reliable tool in molecular detection and diagnostics.

Whole genome sequence of Serratia marcescens 39_H1, a potential hydrolytic and acidogenic strain

•

Serratia marcescens 39_H1 could enhance the hydrolysis of lignocellulosic biomass.

•

Serratia marcescens 39_H1 is a plant growth promoting organism.

•

Genome analysis showed diverse potential biotechnological application of organism.

•

This is an original report on the hydrolytic and acidogenic attributes ofSerratia marcescens 39_H1 for biogas production.

Here, we report a high quality annotated draft genome of Serratia marcescens 39_H1, a Gram-negative facultative anaerobe that was isolated from an anaerobic digester. The strain exhibited hydrolytic/acidogenic properties by significantly improving methane production when used as a single isolate inoculum during anaerobic digestion of water hyacinth and cow dung. The total genome size of the isolate was 5,106,712 bp which corresponds to an N50 of 267,528 and G + C content of 59.7 %. Genome annotation with the NCBI Prokaryotic Genome Annotation Pipeline (PGAP) predicted a total of 4,908 genes of which 4,755 were protein coding genes; there were no plasmids detected. A number of genes associated with hydrolytic/acidogenic activities as well as other metabolic activities were identified and discussed.

Molecular diversity and hydrolytic enzymes production abilities of soil bacteria

Soil is an integral part of ecosystem which is niche for varieties of microflora. The present study was investigated to isolate varied strains of bacteria from soil samples of three different geographical regions of Tamil Nadu (India) and evaluate their hydrolytic enzymes (amylase, cellulase, and inulinase) producing potentialities. Among 72 bacterial cultures isolated from Ambattur Industrial Estate, Neyveli Lignite Corporation, and Arignar Anna Zoological Park regions, 41.66, 38.88, and 36.11% of isolates were observed amylase, cellulase, and inulinase producers, respectively. On the other hand, 20.83% of total bacteria isolated from all three regions exhibited concurrent production of amylase, cellulase, and inulinase. Potent isolates depicting maximum enzyme activities were identified as Bacillus anthracis strain ALA1, Bacillus cereus strain ALA3, Glutamicibacter arilaitensis strain ALA4, and Bacillus thuringiensis strain ALA5 based on molecular characterization tools. Further, the thermodynamics parameters, open reading frames (ORFs) regions, and guanine-cytosine (GC) content were determined by distinct bioinformatics tools using 16S rRNA sequences of strains. Minimum free energy values for strain ALA1, strain ALA3, strain ALA4, and strain ALA5 were calculated as −480.73, −478.76, −496.63, and −479.03 kcal/mol, respectively. Mountain plot and entropy predicted the hierarchical representation of RNA secondary structure. The GC content of sequence for strain ALA1, strain ALA3, strain ALA4, and strain ALA5 was calculated as 53.06, 52.94, 56.78, and 53.06%, respectively. Nine ORFs were obtained for strain ALA1, strain ALA3, and strain ALA5 while 10 ORFs were observed for strain ALA4. Additionally, bootstrap tree demonstrated close resemblance of strains with existing bacteria of similar genus. Findings showed higher variability of bacterial diversity as hydrolytic enzymes producers in the investigated geographical regions.

<i>Pseudomonas stutzeri </i> CM1, Novel Thermotolerant Cellulase- Producing Bacteria Isolated from Forest Soil

BACKGROUND AND OBJECTIVE

Cellulase is an important enzyme that useful for agricultural residue hydrolysis such as plant stover, molasse, rice straw. Thermotolerant cellulases are required to apply in textile, food, detergent, biofuels and pharmaceutical applications. This research aimed to isolate the thermotolerant cellulase-producing bacteria from forest soil and to determine cellulase activity from isolated bacteria.

MATERIALS AND METHODS

Soil samples were collected from the Roi Et Rajabhat University forest. One gram of soil sample was mixed with Luria-Bertani (LB) broth medium and incubated at 37°C with shaking at 150 rpm for 24 h. The cultured broth was streaked on LB agar plate and incubated at 37°C for 24 h. Cellulase-producing bacteria were isolated using Carboxymethylcellulose (CMC) agar plate. Four bacterial isolates which presented a clear zone on CMC agar plate after flooded with iodine solution, named CM1, CM2, CM3 and CM4. Cellulase activity of 4 isolated bacteria was determined against various pH (pH 4-8) and temperature (50-100°C).

RESULTS

The results indicated that CM1 isolate showed the highest cellulase activity at 0.074 unit mL-1 at 80°C and pH5. All isolates were identified using 16S rRNA gene sequencing. The results indicated that CM1, CM3 and CM4 were identified as Pseudomonas stutzeri. while isolate CM2 was Bacillus subtilis.

CONCLUSION

This is the first report presenting the thermotolerant cellulase produced by Pseudomonas stutzeri. The thermotolerant cellulase produced from Pseudomonas stutzeri in this study will be useful in many industrial processes using cellulase at high temperatures.

Draft genome sequence of Parvularcula flava strain NH6-79 T, revealing its role as a cellulolytic enzymes producer

To date, the genus Parvularcula consists of 6 species and no potential application of this genus was reported. Current study presents the genome sequence of Parvularcula flava strain NH6-79 ^T and its cellulolytic enzyme analysis. The assembled draft genome of strain NH6-79 ^T consists of 9 contigs and 7 scaffolds with 3.68 Mbp in size and GC content of 59.87%. From a total of 3,465 genes predicted, 96 of them are annotated as glycoside hydrolases (GHs). Within these GHs, 20 encoded genes are related to cellulosic biomass degradation, including 12 endoglucanases (5 GH10, 4 GH5, and 3 GH51), 2 exoglucanases (GH9) and 6 β-glucosidases (GH3). In addition, highest relative enzyme activities (endoglucanase, exoglucanase, and β-glucosidase) were observed at 27th hour when the strain was cultured in the carboxymethyl cellulose/Avicel^®-containing medium for 45 h. The combination of genome analysis with experimental studies indicated the ability of strain NH6-79 ^T to produce extracellular endoglucanase, exoglucanase, and β-glucosidase. These findings suggest the potential of Parvularcula flava strain NH6-79 ^T in cellulose-containing biomass degradation and that the strain could be used in cellulosic biorefining process.

The Influence of Temperature and Nitrogen Source on Cellulolytic Potential of Microbiota Isolated from Natural Environment

Bacteria from the genus Bacillus are a rich source of commercial enzymes, including amylases, proteases, cellulases, glucose isomerase, and pullulanase. Cellulases account for 15% of the global market of industrial enzymes; thus, new microorganisms producing cellulases in a higher concentration and new ingredients, which can enhance the level of enzyme synthesis, are still needed. Many of cellulose-degrading microorganisms have been isolated so far and characterized in various regions of the world. In this study, we were looking for the bacteria isolated from the natural environment with the high cellulolytic potential, which could be used as components of a biopreparation to accelerate decomposition of postharvest leftovers in agriculture. The 214 bacterial strains were isolated from environmental samples rich in cellulose and their ability to synthesize cellulases were examined using the diffusion method. Six strains, which have the highest diameter of clearing zone both for biomass and supernatant, were selected for identification. Optimization of biosynthesis of the cellulose-degrading enzymes indicated that optimal temperature of this process fluctuated in the range of 21–42°C (depending on the strain and carbon source). The highest cellulolytic activity was observed for the isolates designed as 4/7 (identified as Bacillus subtilis) and 4/18 (identified as Bacillus licheniformis) in a temperature of 32°C. With the use of a desirability function methodology, the optimal medium composition to achieve a simple, cost-efficient process of cellulases production was developed for both strains. These experiments show that microorganisms isolated from natural environmental samples have unique properties and potential for commercial applications (e.g. for biopreparations production).

Saccharification of macroalgal polysaccharides through prioritized cellulase producing bacteria

Marine macroalgal cell wall is predominantly comprised of cellulose (polysaccharide) with the complex chain of glycosidic linkages. Bioethanol production from macroalgae entails breaking this complex chain into simple glucose molecule, which has been the major challenge faced by the industries. Cellulases have been preferred for hydrolysis of cellulose due to the absence of inhibitors affecting the subsequent fermentation process. Cellulose degrading bacteria were isolated from wide-ranging sources from marine habitats to herbivore residues and gastrointestinal region. The investigation reveals that Vibrio parahaemolyticus bacteria has higher hydrolytic capacity with salt tolerance up to 14% and 3.5% salinity is optimum for growth. Higher hydrolytic activity of 2.45 was recorded on carboxymethyl cellulose medium at 48 h and hydrolytic activity of 2.46 on Ulva intestinalis hydrolysate, 3.06 on Ulva lactuca hydrolysate at 72 h of incubation. Total activity of enzyme of 2.11 U/ml and specific activity of 6.05 U/mg were recorded at 24 h. Enzyme hydrolysis of macroalgal biomass; U. intestinalis and U. lactuca produced 135.9 mg/g and 107.6 mg/g of reducing sugar respectively. The study reveals that the enzyme extracted from salt tolerant Vibrio parahaemolyticus bacteria is suitable for optimal saccharification of seaweed polysaccharides towards biofuel production.

Carboxymethyl cellulase production optimization from Glutamicibacter arilaitensis strain ALA4 and its application in lignocellulosic waste biomass saccharification

In this context, carboxymethyl cellulase (CMCase) production from Glutamicibacter arilaitensis strain ALA4 was initially optimized by one factor at a time (OFAT) method using goat dung as proficient feedstock. Two-level full factorial design (2⁵ factorial matrix) using first-order polynomial model revealed the significant (p < 0.05) influence of pH, moisture, and peptone on CMCase activity. Central composite design at N = 20 was further taken into account using a second-order polynomial equation, and thereby liberated maximum CMCase activity of 4925.56 ± 31.61 U/g in the goat dung medium of pH 8.0 and 100% moisture containing 1% (w/w) peptone, which was approximately two fold increment with respect to OFAT method. Furthermore, the partially purified CMCase exhibited stability not only at high pH and temperature but also in the presence of varied metal ions, organic solvents, surfactants, and inhibitors with pronounced residual activities. The enzymatic hydrolysis using partially purified CMCase depicted the maximum liberation of fermentable sugars from alkali pretreated lignocellulosic wastes biomass in the order of paddy straw (13.8 ± 0.15 mg/g) > pomegranate peel (9.1 ± 0.18 mg/g) > sweet lime peel (8.37 ± 0.16 mg/g), with saccharification efficiency of 62.1 ± 0.8, 40.95 ± 0.4, and 37.66 ± 0.4%, respectively after 72 hr of treatment.