Determination of trace mercury species by high performance liquid chromatography-inductively coupled plasma mass spectrometry after cloud point extraction

Experimental design optimisation and validation by accuracy profile of a novel method for Hg speciation analysis by HPLC-ICP-MS and application to Total Diet Studies

This study addresses the development and validation of an analytical method for speciation analysis of mercury (inorganic/Hg2+ and methylmercury/CH3Hg+) in fishery products. The Hg species are separated by reversed-phase (RP) high-performance liquid chromatography (HPLC) coupled to inductively coupled plasma mass spectrometry (ICP-MS). The effective separation of Hg2+ and CH3Hg+ was achieved in <8 min using a peptide mapping RP column and a mobile phase containing 2-mercaptoethanol at 0.25% (v/v) and methanol at 1% (v/v). The optimization was carried out using an experimental design through response surface methodology (RSM) with central composite design (CCD), addressing both the HPLC separation and the sample extraction. The method validation was carried out based on the accuracy profile approach. For this purpose, six series of measurements were carried out in duplicate over a time span of 2 months. The limits of quantification (LOQ) were 2.5 µg/kg (wet weight, ww) for CH3Hg+ and 1.2 µg/kg (ww) for Hg2+. The intermediate reproducibility in terms of coefficient of variation (CVR) was <6%. The bias (%) obtained for the analysis of four certified reference materials (CRMs), namely TORT-3 (lobster hepatopancreas), SRM 1566-b (oyster tissue), SQID-1 (cuttlefish) and NMIJ CRM 7402-a (cod fish tissue) was <7%. This demonstrates the method robustness and suitability for routine speciation analysis of CH3Hg+ and Hg2+ in fishery products. The method is intended to be applied for the analysis of the panel of fishery products and fish-based foods in the framework of the (ongoing) third French Total Diet Study.

A fluorescent probe based on aptamer gold nanoclusters for rapid detection of mercury ions

The mercuric ion (Hg2+) is a hazardous pollutant that is widely distributed in living organisms, foods, and environments with highly toxic and bio-accumulative properties. In the present study, a fluorescent probe based on aptamer gold nanoclusters (apt-AuNCs) was prepared for the ultrasensitive detection of Hg2+ in food. The principle underlying the prepared probe was the quenching of the fluorescence of apt-AuNCs in the presence of Hg2+ due to the strong metallophilic interactions between the 5d10 centers of Hg2+ and Au+. Under optimal conditions, the proposed fluorescent probe exhibited a linear relationship with Hg2+ concentration within the range of 2-200 nM (R2 = 0.9960). In addition, the limit of detection (LOD) was 0.0158 nM, which is below the Chinese standard value of 25 nM for Hg2+ in food. Furthermore, the apt-AuNCs were applied to detect Hg2+ in spinach and crawfish samples, with recovery percentages of 91.99%∼108.06%, meaning that apt-AuNCs could be used as a promising probe to detect Hg2+ in complex food samples.

Strategies for mercury speciation with single and multi-element approaches by HPLC-ICP-MS

Mercury (Hg) and its compounds are highly toxic for humans and ecosystems, and their chemical forms determine both their behavior and transportation as well as their potential toxicity for human beings. Determining the various species of an element is therefore more crucial than understanding its overall concentration in samples. For this reason, several studies focus on the development of new analytical techniques for the identification, characterization, and quantification of Hg compounds. Commercially available, hyphenated technology, such as HPLC-ICP-MS, supports the rapid growth of speciation analysis. This review aims to summarize and critically examine different approaches for the quantification of mercury species in different samples using HPLC-ICP-MS. The steps preceding the quantification of the analyte, namely sampling and pretreatment, will also be addressed. The scenarios evaluated comprehend single and multi-element speciation analysis to create a complete guide about mercury content quantification.

Ultrasound-Assisted One-Pot Cloud Point Extraction for Iron Determination Using Natural Chelating Ligands from Dipterocarpus intricatus Dyer Fruit

An ultrasound-assisted, one-pot cloud point extraction was developed for the determination of iron in vegetable samples by UV-Visible spectrophotometry. This method was based on the complexation of iron with an environmentally-friendly natural chelating agent extracted from Dipterocarpus intricatus Dyer fruit at pH 5.5 in the presence of Triton X-114. Reagent extraction, complexation, and preconcentration were performed simultaneously using ultrasound-assisted extraction at 45 °C. The surfactant-rich phase was diluted with ethanol and loaded through a syringe barrel packed with cotton that acted as a filter to trap the reagent powder. Analyte-entrapped on cotton was eluted using 0.1 mol·L⁻¹ nitric acid solution. Filtrate and eluate solutions were measured absorbance of the dark-blue product at 575 nm. Influential parameters for the procedure were investigated. Under the optimum experimental conditions, the calibration curve was linear, ranging from 0.1 to 1.0 mg·L⁻¹ with r² = 0.997. Limits of detection and quantification were 0.03 and 0.09 mg·L⁻¹, respectively while precision values of intra-day and inter-day were less than 5%. Recovery at 0.5 mg·L⁻¹ ranged from 89.0 to 99.8%, while iron content in vegetable samples ranged from 2.45 to 13.36 mg/100 g. This method was cost-effective, reliable, eco-friendly, and convenient as a green analytical approach to determining iron content.

In Situ Microfluidic SERS Chip for Ultrasensitive Hg2+ Sensing Based on I--Functionalized Silver Aggregates

Mercury(II) ions are causing serious environmental pollution and health damage. Developing a simple, rapid, and sensitive sensor for Hg²⁺ detection is of great significance. Herein, we demonstrate an I^--functionalized surface-enhanced Raman scattering (SERS) substrate for rapid and sensitive Hg²⁺ sensing on a highly integrated microfluidic platform. Based on the combination reaction between I^- and Hg²⁺, the Hg²⁺ sensing is achieved via the SERS intensity "turn-off" strategy, where HgI₂ precipitation is formed on an SERS substrate interface, dissociating the Raman reporters that coadsorbed with I^-. Owing to the strong binding constant between I^- and Hg²⁺, our I^--functionalized substrate demonstrates a very fast sensing response (∼150 s). Through reliable in situ SERS detection, a robust calibration curve between the "turn-off" signal and "lgC" is obtained in a broad concentration range of 10^-9 to 10^-13 M. Additionally, the detectable Hg²⁺ concentration can be as low as 1 fM. The good selectivity toward Hg²⁺ is also verified by testing about a dozen common metal ions in water, such as K⁺, Na⁺, Ca²⁺, Mg²⁺, and so forth. Furthermore, we apply the SERS sensor for real tap and lake water sample detection, and good recoveries of 113, 97, and 107% are obtained. With its advantages of high integration, simple preparation, fast response, high sensitivity, and reliability, the proposed I^--functionalized SERS sensor microfluidic chip can be a promising platform for real-time and on-site Hg²⁺ detection in natural water.

On-site, rapid and visual method for nanomolar Hg2+ detection based on the thymine–Hg2+–thymine triggered “double” aggregation of Au nanoparticles enhancing the Tyndall effect

This work describes a new nanosensor for the simple, rapid, portable, colorimetric analysis of mercury(ii) (Hg²⁺) ions by combining the sensitive Tyndall effect (TE) of colloidal Au nanoparticles (AuNPs) with specific thymine–Hg²⁺–thymine (T–Hg²⁺–T) coordination chemistry for the first time. For the TE-inspired assay (TEA), in the presence of Hg²⁺ in a sample, the analyte can selectively mediate the hybridization of three types of flexible single-stranded DNAs (ssDNAs) to form stable rigid double-stranded DNAs (dsDNAs) via the T–Hg²⁺–T ligand interaction. Subsequent self-assembly of the dsDNAs with terminal thiol groups on the AuNPs' surfaces led to their “double” aggregation in addition to the lack of sufficient ssDNAs as the stabilizing molecules in a high-salt solution, resulting in a remarkably enhanced TE signal that positively relied on the Hg²⁺ level. The results demonstrated that such a TEA method enabled rapid naked-eye qualitative analysis of 625 nM Hg²⁺ within 10 min with an inexpensive laser pointer pen as an inexpensive handheld light source to generate the TE response. Making use of a smartphone for portable TE readout could further quantitatively detect the Hg²⁺ ions in a linear concentration range from 156 to 2500 nM with a limit of detection as low as 25 nM. Moreover, the developed equipment-free nanosensor was also used to analyze the Hg²⁺ ions in real samples including tap water, drinking water, and pond water, the obtained recoveries were within the range of 93.68 to 108.71%. To the best of our knowledge, this is the first report of using the AuNPs and functional nucleic acids to design a TE-based biosensor for the analysis of highly toxic heavy metal ions.

A new equipment-free colorimetric nanosensor was initially developed for quantitative point-of-need detection of nanomolar Hg²⁺ ions based on the enhancement in Tyndall effect of Au nanoparticles via their target-triggered “double” aggregation.

Benefit-risk assessment of commonly consumed fish species from South China Sea based on methyl mercury and DHA

Even though a growing number of reports indicated favorable health effects with fish consumption, kinds of hazardous substances in fish were detected in fish and to be exceeded advisory limitation. Benefit-risk assessment of commonly consumed fish is urgently needed. We conducted fish consumption survey and fish sampling in the coast of South China Sea to assess benefit-risk effect of commonly consumed fish species. For local residents, weekly methyl mercury (MeHg) exposures from commonly consumed fish species ranged from 0.12 to 2.11 μg/kg bw. Apart from Muraenesox cinereus and Acanthopagrus latus, the rest of 92% (23/25) fish species were at low risk of MeHg exposure. Daily docosahexaenoic acid intakes via consuming specific fish were between 42.18 and 1687.04 mg/day. A total of 72% (18/25) fish species could provide 200 mg/day of DNA for local residents. Benefit-risk assessment assuming intelligence quotient (IQ) score model showed net IQ point gains between 1.53 and 5.65 points with consuming various fish species, indicative of large distinction of health benefit from various fish species. This study suggests commonly consumed fish species from China South Sea could bring much more positive effect than negative effect. Species-specific fish should be considered when providing recommendations of fish consumption. Muraenesox cinereus and Acanthopagrus latus should be minded with risk of MeHg exposure in taking large amounts.

Colorimetric detection of cysteine based on dispersion–aggregation mechanism of chitosan stabilized gold nanoparticles

A simple and selective colorimetric method for detection of cysteine using chitosan stabilized gold nanoparticles has been developed. L-cysteine is a sulfur containing amino acid. Cysteine binds with the gold nanoparticles through a sulfur group and induces aggregation of the nanoparticles, which leads to a visible colour change from pale red to blue. A good linearity was observed from 0.1 to 30 μmol/L (R = 0.9958) cysteine, and the limit of detection was found to be 0.1 μmol/L. The gold nanoparticles showed a high selectivity towards the detection of cysteine even in the presence of 10 000 fold higher concentration of common interferences such as glutathione, methionine, and homocysteine. A plausible mechanism for the selective detection of cysteine in presence of interferences based on a dispersion–aggregation mechanism has been proposed.

Sensitive Water-Soluble Fluorescent Probe Based on Umpolung and Aggregation-Induced Emission Strategies for Selective Detection of Hg2+ in Living Cells and Zebrafish

Using Hg²⁺-induced umpolung reaction and aggregation induced emission (AIE), we have rationally developed a water-soluble fluorescent probe 2,2'-(((4-(4,5-bis(4-methoxyphenyl)-1-phenyl-1H-imidazol-2-yl)phenyl)methylene)bis(sulfanediyl))diethanol (MPIPBS) for Hg²⁺ detection. MPIPBS was found to have high selectivity and sensitivity toward Hg²⁺ detection. The mechanism of MPIPBS response to Hg²⁺ was verified by ¹H NMR titration, HPLC, and HRMS spectroscopy. The detection limit was examined to be 1.45 nM, which is lower than most reported probes for Hg²⁺. Taking advantage of excellent optical properties of AIEgen, a paper based sensor for Hg²⁺ detection was fabricated by immobilizing the MPIPBS on Waterman test paper. Meanwhile, MPIPBS showed satisfactory analytical performance in real water and urine samples. Further, thanks to the high water solubility, cell membrane permeability and low cytotoxicity, MPIPBS was further used to detect Hg²⁺ both in living cells and zebrafish. We anticipate that the prepared probe was available to detect Hg²⁺ in environment and biosamples.

An aggregation-induced emission-based fluorescence turn-on probe for Hg2+ and its application to detect Hg2+ in food samples

In this work, we presented a new tetraphenylethene-derived fluorescent probe TPE-M for Hg²⁺ detection in an aqueous solution. Probe TPE-M is molecularly dissolved in CH₃OH/PBS (20 mM, pH = 7.4) (3 : 7, v/v) mixed solution and is almost non-emissive. Reaction of TPE-M with Hg²⁺ leads to release of an AIE-active precursor 4, and results in a significant fluorescence enhancement. The Hg²⁺ recognition process has some distinct advantages including rapid response, high selectivity and sensitivity, strong anti-interference ability, and a low detection limit (4.16 × 10⁻⁶ M). Moreover, the probe is applicable to detect Hg²⁺ in real food samples such as shrimp, crab and teas, suggesting the practical applicability of TPE-M.

A new AIE-based fluorescent probe TPE-M for Hg²⁺ detection in an aqueous solution has been developed.

Highly sensitive and selective determination of Hg(II) based on microfluidic chip with on-line fluorescent derivatization

In this study, a convenient, sensitive, rapid and simple method was developed on microfluidic chip which was integrated with on-line complexing and laser-induced fluorescence detection. A rhodamine derivative (RD) was developed as a fluorescent chemosensor for Hg(II). It exhibited high selective recognition toward Hg(II) over other examined metal ions in water samples. Under the optimized conditions, the response was linearly proportional to the concentration of Hg(II) in the range of 0-70 μM with a detection limit of 0.031 μM. Satisfactory repeatability and reproducibility were achieved, with a relative standard deviation (RSD) of 6.62%. The established method was successfully applied for the determination of Hg(II) in environmental water samples (surface water, tap water, and waste water). Recoveries obtained for the determination of Hg(II) in spiking samples ranged from 85% to 103%.

The preparation of a flexible AuNP modified carbon cloth electrode and its application in electrochemical detection of Hg(ii) by continuous flow in environmental water

In this article, a carbon cloth composite electrode modified with gold nanoparticles (AuNPs) was prepared by a facile in situ electrodeposition method and applied to the detection of mercury ions in water. With the optimized electrochemical detection conditions and methods, the limit of detection (LOD) was 0.6 μg L^-1 with the linearity ranging from 2 to 200 μg L^-1 by the SWSV detection method, and the electrode showed good repeatability after many cycles. Based on this detection method, a continuous flow electrochemical detection system was constructed and applied to the detection of Hg ions in environmental water samples. The standard addition experimental results of two real water samples with an addition level of 10 and 50 μg L^-1 showed that the recoveries were between 92.4% and 108.9% with RSDs from 2.01% to 3.22%. These results showed the same performance as that of the ZAAS mercury detection method (recovery: 94-102.4%, RSD 2.09-5.4%). Compared with other electrode materials, a shorter detection time, a wider linear range and high stability with a similar LOD can be achieved by a continuous flow detection method by using the composite electrode. The established continuous flow electrochemical detection system would have promising application in online and real-time detection of heavy metals in environmental water.

Long-Term Feeding of Elemental Sulfur Alters Microbial Community Structure and Eliminates Mercury Methylation Potential in Sulfate-Reducing Bacteria Abundant Activated Sludge

This study reported a novel observation that the long-term cultivation of sulfur-reducing bacteria (S⁰RB) from a sulfate-reducing bacteria (SRB)-abundant seeding sludge with elemental sulfur feeding significantly shaped the microbial community structure and eliminated the mercury methylation potential in the S⁰RB-enriched sludge. In this study, the enrichments of SRB and S⁰RB from activated sludge were obtained through long-term cultivations. Subsequently, the batch tests showed that approximately 5000 μg/L Hg (II) was completely removed from the solution by both the SRB-enriched and S⁰RB-enriched sludge. Extremely low or no MeHg production was observed in the S⁰RB-enriched sludge (less than the limit of detection, 0.01 μg/L), while 1.49 μg/L MeHg accumulated in the SRB-enriched sludge. Other batch tests using the sludge samples from a replication of the cultivation showed that the methylation capability of the S⁰RB-enriching sludge gradually diminished to a negligible level over a 6 month cultivation time. However, some mercury-methylation-related bacteria were present in the enrichment of S⁰RB such as Geobacter. The absence of MeHg in the S⁰RB-enriched sludge may be attributed to the dissolved organic matter (DOM) instead of the sulfur- and sulfate-reduction pathway or MeHg demethylation when exposed to Hg (II). The cultivated S⁰RB could be used for mercury-contaminated wastewater treatment without MeHg concern.

A Review on Recent Applications of High-Performance Liquid Chromatography in Metal Determination and Speciation Analysis

High-performance liquid chromatography (HPLC) has several advantages over the conventional methods due to their operational simplicity. It is a vital tool to determine metal ions having same mass but different electronic configuration, to separate complex mixtures and to resolve ions that may be indistinguishable by mass spectrometry alone. Metal ions play vital role in many biological processes and involved in setting up of many diseases. Therefore, the development of simple methods for the detection and quantification of metals in real samples might serve as diagnostic tools for various diseases. This review article focuses on the recent main feature of this technique, i.e. speciation of metal ions and their applications to series of problem of metal ion chemistry in different environmental matrixes. Speciation of metals is of increasing interest and has a great importance because of bioavailability, environmental mobility, toxicity and potential risk of metals. With the capability of partitioning the complex species of different metal ions, HPLC is an efficient technique for this task. This review summarizes recent advances in the development of HPLC to the fundamental understanding of metal ion chemistry in the environment and discusses all the issues that still need a lot of consideration. It has been classified into different sections depending on the role of HPLC in separation used and metal speciation; furthermore, the underlying sample preconcentration techniques and detection systems involved for the determination of metal ions and their applications were discussed.

Effects of Lead and Mercury on Sulfate-Reducing Bacterial Activity in a Biological Process for Flue Gas Desulfurization Wastewater Treatment

Biological sulfate-reducing bacteria (SRB) may be effective in removing toxic lead and mercury ions (Pb(II) and Hg(II)) from wet flue gas desulfurization (FGD) wastewater through anaerobic sulfite reduction. To confirm this hypothesis, a sulfite-reducing up-flow anaerobic sludge blanket reactor was set up to treat FGD wastewater at metal loading rates of 9.2 g/m³-d Pb(II) and 2.6 g/m³-d Hg(II) for 50 days. The reactor removed 72.5 ± 7% of sulfite and greater than 99.5% of both Hg(II) and Pb(II). Most of the removed lead and mercury were deposited in the sludge as HgS and PbS. The contribution of cell adsorption and organic binding to Pb(II) and Hg(II) removal was 20.0 ± 0.1% and 1.8 ± 1.0%, respectively. The different bioavailable concentration levels of lead and mercury resulted in different levels of lethal toxicity. Cell viability analysis revealed that Hg(II) was less toxic than Pb(II) to the sludge microorganisms. In the batch tests, increasing the Hg(II) feeding concentration increased sulfite reduction rates. In conclusion, a sulfite-reducing reactor can efficiently remove sulfite, Pb(II) and Hg(II) from FGD wastewater.

Facile fabrication of an electrochemical aptasensor based on magnetic electrode by using streptavidin modified magnetic beads for sensitive and specific detection of Hg(2.)

In this work, a novel electrochemical aptasensor was developed for sensitive and specific detection of Hg(2+) based on thymine-Hg(2+)-thymine (T-Hg(2+)-T) structure via application of thionine (Th) as indicator signal. For the fabrication of the aptasensor, streptavidin modified magnetic beads (Fe3O4-SA) was firmly immobilized onto the magnetic glassy carbon electrode (MGCE) benefited from its magnetic character. Then biotin labeled T-riched single stranded DNA (Bio-ssDNA) connected with Fe3O4-SA specifically and steadily because of the specific binding capacity between streptavidin and biotin. The stable structure of T-Hg(2+)-T formed in the present of Hg(2+) provided convenience for the intercalation of Th. The detection of Hg(2+) was achieved by recording the differential pulse voltammetry (DPV) signal of Th. Under optimal experimental conditions, the linear range of the fabricated electrochemical aptasensor was 1-200nmol/L, with a detection limit of 0.33nmol/L. Furthermore, the proposed aptasensor may find a potential application for the detection of Hg(2+) in real water sample analysis.

A turn on fluorescent sensor based on lanthanide coordination polymer nanoparticles for the detection of mercury(ii) in biological fluids

Im-quenched fluorescence of Eu/IPA CPNPs can be recovered upon the addition of Hg²⁺ through the formation of a Hg/Im complex.

Application of a novel electrochemical sensor based on modified siliceous mesocellular foam for electrochemical detection of ultra-trace amounts of mercury ions

S-MCF particles were functionalized with dithizone groups, and applied as a new class of mesoporous electrode material for preconcentration and electrochemical detection of trace mercury ions in environmental samples.

Flow injection chemiluminescence immunoassay based on resin beads, enzymatic amplification and a novel monoclonal antibody for determination of Hg2+

A convenient competitive immunoassay of Hg²⁺ using carboxylic resin beads, specific monoclonal antibody and enzymatic amplification is proposed with flow injection chemiluminescence detection.

Thiol-functionalized silica microspheres for online preconcentration and determination of mercury species in seawater by high performance liquid chromatography and inductively coupled plasma mass spectrometry

Thiol-functionalized silica microspheres were synthesized from aminosilica for online mercury preconcentration, followed by high performance liquid chromatographic separation and inductively coupled plasma mass spectrometry detection.