Adsorption of platinum(IV) and palladium(II) from aqueous solution by magnetic cross-linking chitosan nanoparticles modified with ethylenediamine

Development of a Novel Cyclodextrin-Chitosan Polymer for an Efficient Removal of Pharmaceutical Contaminants in Aqueous Solution

A novel polymer synthesized by grafting three cyclodextrins onto chitosan was characterized and evaluated for its potential to adsorb two pharmaceutical residues: ibuprofen and progesterone. The influence of various operational parameters, including contact time, initial molecule concentration, pH, ionic strength, and temperature, was investigated. The synthesized polymer exhibits an amorphous and porous structure with a remarkable swelling capacity of 9.5 mmol/g. It demonstrates remarkable adsorption capacities for progesterone and ibuprofen, reaching 90% and 75%, respectively. Kinetic studies reveal that the adsorption of both molecules follows a pseudo-second-order model. A DSC analysis elucidated the adsorption mechanism, which is governed by the formation of inclusion complexes and electrostatic interactions within the polymer network. The polymer's regeneration after 23 cycles demonstrates its sustainable adsorption efficiency. The combination of chitosan with three cyclodextrins opens up promising new avenues for water treatment and the removal of specific pollutants. This approach significantly improves the material's selectivity towards target pollutants, offering a significant advantage in pollution remediation applications.

Tailoring the Coordination Micro-Environment in Nanotraps for Efficient Platinum/Palladium Separation

Recovering platinum group metals from secondary resources is crucial to meet the growing demand for high-tech applications. Various techniques are explored, and adsorption using porous materials has emerged as a promising technology due to its efficient performance and environmental beingness. However, the challenge lies in effectively recovering and separating individual platinum group metals (PGMs) given their similar chemical properties. Herein, a breakthrough approach is presented by sophisticatedly tailoring the coordination micro-environment in a series of aminopyridine-based porous organic polymers, which enables the creation of platinum-specific nanotraps for efficient separation of binary PGMs (platinum/palladium). The newly synthesized POP-o2NH2-Py demonstrates record uptakes and selectivity toward platinum over palladium, with the amino groups adjacent to the pyridine moieties being vital in improving platinum binding performance. Further breakthrough experiments underline its remarkable ability to separate platinum and palladium. Spectroscopic analysis reveals that POP-o2NH2-Py offers a more favorable coordination fashion to platinum ions compared to palladium ions owing to the greater interaction between N and Pt4+ and stronger intramolecular hydrogen bonding between the amino groups and four coordinating chlorines at platinum. These findings underscore the importance of fine-tuning the coordination micro-environment of nanotraps through subtle modifications that can greatly enhance the selectivity toward the desired metal ions.

Precious Metal Recovery from Wastewater Using Bio-Based Techniques

The recovery of metals from waste material has been on the increase in the past few years due to a number of reasons such as supporting the diversification of metal supply resources. In addition, the alternative use of the waste material for metal recovery can add to the main production line, boosting production throughput and profitability thus, allowing companies to sustain their activities during times of low commodity prices. While there has been a lot of research and interest in the recovery of precious metals such as platinum group metals (PGMs), Au, and Ag from solid waste material, there has been limited focus on the recovery of these value metals from wastewater. This is mostly related to challenges associated with finding cost-effective technologies that can recover these metals from solutions of low metal concentrations. In recent years, bio-based technologies have, however, become established as potential alternatives to traditional techniques in the treatment of wastewater due to their ability to recover metals from solutions of low concentrations. While wastewater might be characterized by some significant value metal content, it also contains other components that have potential economic value if recovered or converted to by-products. Such an approach may not only provide an opportunity for extraction of metal resources from wastewater but also contributes toward the circular economy. This chapter presents insights into precious metal recovery from wastewater using bio-based technologies, compares such an approach to the traditional techniques, explores the recovery of other value-added products and finally considers some of the challenges associated with the large-scale application of the bio-based technologies.

Adsorption of palladium from chloride aqueous solution using silica alginate nanomaterial

The adsorption characteristics of palladium from chloride aqueous solution onto the silica alginate (SA-Si) nanomaterial have been investigated. The prepared nanomaterial (SA-Si) was characterized by various advanced techniques that ensured a successful preparation process. Different adsorption parameters including the solution pH, shaking time, palladium ion concentration, adsorbent dosage, and temperature were investigated. The experimental results showed that the pseudo-first-order model provided the best fitting for the palladium ions adsorption, and the time required to reach equilibrium was 90.0 min. The adsorption isotherm result from palladium was well described by the Langmuir isotherm model and the maximum adsorption capacity of (SA-Si) nanomaterial was estimated as 12.50 mg/g for Pd(II). Moreover, the thermodynamic results demonstrated that Pd(II) sorption onto (SA-Si) nanomaterial was endothermic and spontaneous. Additionally, the SA-Si nanomaterial can be used as an effective adsorbent for the sorption of Pd(II) from various metal ions present in fission products.

Nanoparticles and nanofiltration for wastewater treatment: From polluted to fresh water

Water pollution poses significant threats to both ecosystems and human health. Mitigating this issue requires effective treatment of domestic wastewater to convert waste into bio-fertilizers and gas. Neglecting liquid waste treatment carries severe consequences for health and the environment. This review focuses on intelligent technologies for water and wastewater treatment, targeting waterborne diseases. It covers pollution prevention and purification methods, including hydrotherapy, membrane filtration, mechanical filters, reverse osmosis, ion exchange, and copper-zinc cleaning. The article also highlights domestic purification, field techniques, heavy metal removal, and emerging technologies like nanochips, graphene, nanofiltration, atmospheric water generation, and wastewater treatment plants (WWTPs)-based cleaning. Emphasizing water cleaning's significance for ecosystem protection and human health, the review discusses pollution challenges and explores the integration of wastewater treatment, coagulant processes, and nanoparticle utilization in management. It advocates collaborative efforts and innovative research for freshwater preservation and pollution mitigation. Innovative biological systems, combined with filtration, disinfection, and membranes, can elevate recovery rates by up to 90%, surpassing individual primary (<10%) or biological methods (≤50%). Advanced treatment methods can achieve up to 95% water recovery, exceeding UN goals for clean water and sanitation (Goal 6). This progress aligns with climate action objectives and safeguards vital water-rich habitats (Goal 13). The future holds promise with advanced purification techniques enhancing water quality and availability, underscoring the need for responsible water conservation and management for a sustainable future.

Graphene oxide-based dendritic adsorbent for the excellent capturing of platinum group elements

Herein, we report amino functionalized thermally stable graphene oxide-based dendritic adsorbent (GODA) with the highest sorption capacity ever recorded for platinum group elements (PGEs), including platinum (Pt(IV), PtCl₆^2-) and palladium (Pd(II), PdCl₄^2-), from highly acidic aqueous solutions. The GODA was designed and synthesized to have fully ionized amine binding sites and was characterized in detail. The detail batch adsorption experiment along with kinetic, isotherm, and thermodynamic studies were carried out to investigate the adsorption efficacy of GODA. For both Pt(IV) and Pd(II), the experimental data are more accurately fitted with the pseudo-second-order and the intraparticle diffusion kinetic models and Langmuir isotherm model as compared to the pseudo-first-order kinetic model and Freundlich and Temkin isotherm models, respectively. The material showed the highest ever adsorption capacities of 827.8 ± 27.7 mg/g (4.24 ± 0.00 mmol/g) and 890.7 ± 29.1 mg/g (8.37 ± 0.00 mmol/g) for Pt(IV) and Pd(II), respectively, at pH 1. The adsorption equilibriums were achieved within 70 min and 65 min for Pt(IV) and Pd(II), respectively. The thermodynamic parameters indicate that the adsorptions of both metals are spontaneous. The binding mechanisms are considered to be electrostatic interactions, hydrogen bonding, cationic-π bonding, and surface complexation between the sorbent and the sorbates. Furthermore, the as-prepared GODA exhibited high thermal stability and significant acid-resistance at pH 1. The GODA demonstrated excellent regeneration and reusability for Pt(IV) and Pd(II) over five adsorption/desorption cycles, indicating its excellence in practical applications.

Developments and application of chitosan-based adsorbents for wastewater treatments

Water quality is deteriorating continuously as increasing levels of toxic inorganic and organic contaminants mostly discharging into the aquatic environment. Removal of such pollutants from the water system is an emerging research area. During the past few years use of biodegradable and biocompatible natural additives has attracted considerable attention to alleviate pollutants from wastewater. The chitosan and its composites emerged as a promising adsorbents due to their low price, abundance, amino, and hydroxyl groups, as well as their potential to remove various toxins from wastewater. However, a few challenges associated with its practical use include lack of selectivity, low mechanical strength, and solubility in acidic medium. Therefore, several approaches for modification have been explored to improve the physicochemical properties of chitosan for wastewater treatment. Chitosan nanocomposites found effective for the removal of metals, pharmaceuticals, pesticides, microplastics from the wastewaters. Nanoparticle doped with chitosan in the form of nano-biocomposites has recently gained much attention and proven a successful tool for water purification. Hence, applying chitosan-based adsorbents with numerous modifications is a cutting-edge approach to eliminating toxic pollutants from aquatic systems with the global aim of making potable water available worldwide. This review presents an overview of distinct materials and methods for developing novel chitosan-based nanocomposites for wastewater treatment.

Amino-Functionalized Hierarchical Porous Carbon Derived from Zeolitic Imidazolate Frameworks for Ultrasensitive Electrochemical Sensing of Heavy Metals in Water

Electrochemical sensing provides a feasible avenue to monitor heavy metal ions (HMIs) in water, whereas the construction of highly sensitive and selective sensors remains challenging. Herein, we fabricated a novel amino-functionalized hierarchical porous carbon by the template-engaged method using ZIF-8 as the precursor and polystyrene sphere as the template, followed by carbonization and controllable chemical grafting of amino groups for efficient electrochemical detection of HMIs in water. The amino-functionalized hierarchical porous carbon features an ultrathin carbon framework with a high graphitization degree, excellent conductivity, unique macro-, meso-, and microporous architecture, and rich amino groups. As a result, the sensor exhibits prominent electrochemical performance with significantly low limits of detection for individual HMIs (i.e., 0.93 nM for Pb²⁺, 2.9 nM for Cu²⁺, and 1.2 nM for Hg²⁺) and simultaneous detection of HMIs (i.e., 0.62 nM for Pb²⁺, 1.8 nM for Cu²⁺, and 0.85 nM for Hg²⁺), which are superior to most reported sensors in the literature. Moreover, the sensor displays excellent anti-interference ability, repeatability, and stability for HMI detection in actual water samples.

Radiation Resistance and Adsorption Behavior of Aluminum Hexacyanoferrate for Pd

Irradiation resistance is important for adsorbents used in radioactive environments such as high-level liquid waste. In this work, a silica-based composite adsorbent (KAlFe(CN)₆/SiO₂) was synthesized and γ-irradiated from 10 to 1000 kGy. The angles of the main X-ray diffraction peaks slightly decreased with the increase in irradiation dose, and a minor decomposition of CN^- occurred after irradiation to 1000 kGy, indicating that the KAlFe(CN)₆/SiO₂ adsorbent could preserve structural integrity with a dose below 100 kGy. In 1 to 7 M HNO₃, the adsorption ability of the irradiated KAlFe(CN)₆/SiO₂ remained performant, with a higher K_d than 1625 cm³ g^-1. The adsorption equilibrium of Pd(II) in 3 M HNO₃ was attained within 45 min before and after irradiation. The maximal adsorption capacity Q_e of the irradiated KAlFe(CN)₆/SiO₂ on Pd(II) ranged from 45.1 to 48.1 mg g^-1. A 1.2% relative drop in Q_e was observed after 100 kGy irradiation, showing that γ-irradiation lower than 100 kGy insignificantly affected the adsorption capacity of KAlFe(CN)₆/SiO₂. Calculating and comparing the structures and free energies of different adsorption products via the density functional theory (DFT) method showed that KAlFe(CN)₆/SiO₂ was more inclined to completely adsorb Pd(II) and spontaneously generate Pd[AlFe(CN)₆]₂.

Evaluation of Dithiocarbamate-Modified Silica for Cisplatin Removal from Water

Despite the globally increasing use of platinum-based cytostatic drugs in the treatment of several types of cancer, only limited attention has been paid to developing a treatment for contaminated liquid samples originating from hospitals, laboratories and manufacturing facilities before and after their administration. In this work, we assess the efficiency of a low-cost adsorbent material, a dithiocarbamate-functionalized silica, in removing cisplatin from a solution containing it in the 0.5–150 mg L−1 concentration range. The advantage of having a surface-functionalized silica is that adsorption can occur by either non-covalent interaction or surface complexation. In the latter case platinum(II) is de-complexed and the original drug is no longer present. Adsorption occurs through a first rapid step, followed by a second slower process. This is likely due to the fact that in our operating conditions (0.9% w/v NaCl), only the original compound is present, for which ligand substitution is known to proceed slowly. The interesting performance, even at low metal concentration, and facile synthesis of the material mean it could be adapted for other applications where the recycling of platinum can be realized.

Advanced Polymeric Nanocomposite Membranes for Water and Wastewater Treatment: A Comprehensive Review

Nanomaterials have been extensively used in polymer nanocomposite membranes due to the inclusion of unique features that enhance water and wastewater treatment performance. Compared to the pristine membranes, the incorporation of nanomodifiers not only improves membrane performance (water permeability, salt rejection, contaminant removal, selectivity), but also the intrinsic properties (hydrophilicity, porosity, antifouling properties, antimicrobial properties, mechanical, thermal, and chemical stability) of these membranes. This review focuses on applications of different types of nanomaterials: zero-dimensional (metal/metal oxide nanoparticles), one-dimensional (carbon nanotubes), two-dimensional (graphene and associated structures), and three-dimensional (zeolites and associated frameworks) nanomaterials combined with polymers towards novel polymeric nanocomposites for water and wastewater treatment applications. This review will show that combinations of nanomaterials and polymers impart enhanced features into the pristine membrane; however, the underlying issues associated with the modification processes and environmental impact of these membranes are less obvious. This review also highlights the utility of computational methods toward understanding the structural and functional properties of the membranes. Here, we highlight the fabrication methods, advantages, challenges, environmental impact, and future scope of these advanced polymeric nanocomposite membrane based systems for water and wastewater treatment applications.

Recovery of palladium from a low grade palladium solution by anionic-ion exchange: kinetics, equilibrium, and metal competition

Petroleum spent catalysts may contain a significant amount of palladium (Pd) together with other major [aluminum (Al), nickel (Ni), and molybdenum (Mo)] and minor [iron (Fe), lead (Pb), and vanadium (V)] elements. Due to the high intrinsic value of Pd and its scarcity in natural ores, its recovery is highly desired. For this purpose, the ability of a strong basic anionic- resin, Purogold™ A194 resin, to remove Pd from the solution was assessed. Data from kinetic and equilibrium studies, performed under batch mode in 1 mol/L of NaCl and 1 mol/L of HNO₃ at (21 ± 1) °C, revealed that the removal of Pd fits well a pseudo-second-order kinetic model [constant rate value, k₂, of (0.062 ± 0.010) g/(mmol.min)] and a Langmuir isotherm [maximum sorption capacity of (0.80 ± 0.02) mmol/g with an affinity of resin binding sites towards Pd, K_L, of (0.18 ± 0.02) L/mmol], respectively. The sorption of other metals (Al, Fe, Pb, Mo, Ni, and V) that may be present in spent catalyst leachates was tested under similar experimental conditions [C_M = 2.5 mmol/L, 1 mol/L of NaCl and 1 mol/L of HNO₃ at (21 ± 1) °C)] and the resin showed little affinity towards each one of these metals. Also, simultaneous multi-element batch experiments with Pd and the major components (M = Al, Ni, and Mo ions) ([M]/[Pd] molar ratios between 3.4 and 52 were used) pointed out that the resin is highly selective towards Pd suggesting that the resin can be used in the selective recovery of Pd from petroleum spent catalyst leachates.

Efficient and selective adsorption of Au(iii), Pt(iv), and Pd(ii) by a radiation-crosslinked poly(ionic liquid) gel

A PIL gel was prepared for Au(iii), Pt(iv), and Pd(ii) recovery. The PIL gel exhibited fast adsorption rates and excellent selectivity for target ions. Furthermore, the gel could efficiently separate Au(iii) from gold slag leaching solution.

Recent progress, synthesis, and applications of chitosan-decorated magnetic nanocomposites in remediation of dye-laden wastewaters

Over the past several decades, the disposal of dyes from the industrial manufacturing sector has had an inadvertent impact on water ecology as polluted water bodies with these hazardous dyes...

Fast and efficient adsorption of palladium from aqueous solution by magnetic metal-organic framework nanocomposite modified with poly(propylene imine) dendrimer

In this study, a magnetic metal-organic framework (MMOF) was synthesized and post-modified with poly(propyleneimine) dendrimer to fabricate a novel functional porous nanocomposite for adsorption and recovery of palladium (Pd(II)) from aqueous solution. The morphological and structural characteristics of the prepared material were identified by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmet-Teller (BET) isotherm, and vibrating sample magnetometer (VSM). The results confirmed the successful synthesis and post-modification of MMOF. Semispherical shape particles (20-50 nm) with appropriate magnetic properties and a high specific surface area of 120 m²/g were obtained. An experimental design approach was performed to show the effect of adsorption conditions on Pd(II) uptake efficiency of the dendrimer-modified magnetic adsorbent. The study showed that the Pd(II) uptake on dendrimer-modified MMOF was well described by the Langmuir isotherm model with the highest uptake capacity of 291 mg/g under optimal condition (adsorbent content of 12.5 mg, Pd ion concentration of 80 ppm, pH = 4, and contact time of 40 min). The adsorption kinetics of Pd(II) ions was suggested to be a pseudo-first-order model. The results revealed a faster adsorption rate and higher adsorption capacity (about 43%) for dendrimer-modified MMOF. Finally, the reusability of the provided adsorbent was evaluated. This work provides a valuable strategy for designing and developing efficient magnetic adsorbents based on MOFs for the adsorption and recovery of precious metals.

Research progress of adsorption and removal of heavy metals by chitosan and its derivatives: A review

Chitosan has received widespread attention as an adsorbent for pollutants because of its low cost and great adsorption potentials. Chitosan has abundant hydroxyl and amino groups that can bind heavy metal ions. However, it has defects such as sensitivity to pH, low thermal stability, and low mechanical strength, which limit the application of chitosan in wastewater treatment. The functional groups of chitosan can be modified to improve its performance via crosslinking and graft modification. The porosity and specific surface area of chitosan in powder form are not ideal, therefore, physical modification has been attempted to generate chitosan nanoparticles and hydrogel. Chitosan has also been integrated with other materials (e.g. graphene, zeolite) resulting in composite materials with improved adsorption performance. This review mainly focuses on reports about the application of chitosan and its derivatives to remove different heavy metals. The preparation strategy, adsorption mechanism, and factors affecting the adsorption performance of adsorbents for each type of heavy metal are discussed in detail. Recent reports on important organic pollutants (dyes and phenol) removal by chitosan and its derivatives are also briefly discussed.

A Review of Adsorbents for Heavy Metal Decontamination: Growing Approach to Wastewater Treatment

Heavy metal is released from many industries into water. Before the industrial wastewater is discharged, the contamination level should be reduced to meet the recommended level as prescribed by the local laws of a country. They may be poisonous or cancerous in origin. Their presence does not only damage people, but also animals and vegetation because of their mobility, toxicity, and non-biodegradability into aquatic ecosystems. The review comprehensively discusses the progress made by various adsorbents such as natural materials, synthetic, agricultural, biopolymers, and commercial for extraction of the metal ions such as Ni2+, Cu2+, Pb2+, Cd2+, As2+ and Zn2+ along with their adsorption mechanisms. The adsorption isotherm indicates the relation between the amount adsorbed by the adsorbent and the concentration. The Freundlich isotherm explains the effective physical adsorption of the solute particle from the solution on the adsorbent and Langmuir isotherm gives an idea about the effect of various factors on the adsorption process. The adsorption kinetics data provide valuable insights into the reaction pathways, the mechanism of the sorption reaction, and solute uptake. The pseudo-first-order and pseudo-second-order models were applied to describe the sorption kinetics. The presented information can be used for the development of bio-based water treatment strategies.

A Pyridyltriazol Functionalized Zirconium Metal-Organic Framework for Selective and Highly Efficient Adsorption of Palladium

This work reports the synthesis of pyridyltriazol-functionalized UiO-66 (UiO stands for University of Oslo), namely, UiO-66-Pyta, from UiO-66-NH₂ through three postsynthetic modification (PSM) steps. The good performance of the material derives from the observation that partial formylation (∼21% of -NHCHO groups) of H₂BDC-NH₂ by DMF, as persistent impurity, takes place during the synthesis of the UiO-66-NH₂. Thus, to enhance material performance, first, the as-synthesized UiO-66-NH₂ was deformylated to give pure UiO-66-NH₂. Subsequently, the pure UiO-66-NH₂ was converted to UiO-66-N₃ with a nearly complete conversion (∼95%). Finally, the azide-alkyne[3+2]-cycloaddition reaction of 2-ethynylpyridine with the UiO-66-N₃ gave the UiO-66-Pyta. The porous MOF was then applied for the solid-phase extraction of palladium ions from an aqueous medium. Affecting parameters on extraction efficiency of Pd(II) ions were also investigated and optimized. Interestingly, UiO-66-Pyta exhibited selective and superior adsorption capacity for Pd(II) with a maximum sorption capacity of 294.1 mg g^-1 at acidic pH (4.5). The limit of detection (LOD) was found to be 1.9 μg L^-1. The estimated intra- and interday precisions are 3.6 and 1.7%, respectively. Moreover, the adsorbent was regenerated and reused for five cycles without any significant change in the capacity and repeatability. The adsorption mechanism was described based on various techniques such as FT-IR, PXRD, SEM/EDS, ICP-AES, and XPS analyses as well as density functional theory (DFT) calculations. Notably, as a case study, the obtained UiO-66-Pyta after palladium adsorption, UiO-66-Pyta-Pd, was used as an efficient catalyst for the Suzuki-Miyaura cross-coupling reaction.

Preparation and performance of poly(4-vinylpyridine)-b-polysulfone-b-poly(4-vinylpyridine) triblock copolymer/polysulfone blend membrane for separation of palladium (II) from electroplating wastewaters

In order to separate palladium (II) from electroplating wastewaters, poly(4-vinylpyridine)-b-polysulfone-b-poly(4-vinylpyridine) (P4VP-PSF-P4VP) / polysulfone blend membranes were fabricated by combining non-solvent induced phase separation, surface segregation and self-assembly of block copolymer. Amphiphilic P4VP-PSF-P4VP was used as the membrane base material, which was synthesized by introducing the functional monomer of 4-vinylpyridine (4-VP), and polysulfone as the additive. Effects of blend ratio and 4-VP content on membrane performance, such as structure, hydrophilicity, pure water flux and adsorption capacity towards Pd (II), were investigated. The membranes exhibited dense surface structure and low roughness due to surface segregation and self-assembly of P4VP-PSF-P4VP. The presence of 4-VP increased hydrophilicity and water flux of membrane, and it also provided good adsorption capacity towards Pd (II) (up to 103.1 ± 5.15 mg/g). Further, the membrane was used to separate Pd (II) from simulated wastewaters during filtration. It showed good rejection ability and high selectivity towards Pd (II) in co-existence of Cu (II) and Ni (II), and selectivity coefficients of Pd/Cu and Pd/Ni are 41.9 ± 1.88 and 97.8 ± 4.32, respectively. In filtration process of actual electroplating wastewater, the membrane also exhibited excellent rejection performance (Pd (II) rejection reached up to 96.8 ± 2.71%). Perhaps it is suitable for future practice applications.

Removal of Platinum and Palladium from Wastewater by Means of Biosorption on Fungi Aspergillus sp. and Yeast Saccharomyces sp

The emission of platinum group metals from different sources has caused elevated concentrations of platinum and palladium in samples of airborne particulate matter, soil, surface waters and sewage sludge. The ability of biomass of Aspergillus sp. and yeast Saccharomyces sp. for removal of Pt(IV) and Pd(II) from environmental samples was studied in this work. The pH of the solution, the mass of biosorbent, and contact time were optimized. The Langmuir and Freundlich adsorption isotherms and kinetic results were used for interpretation of the process equilibrium of Pt(IV) and Pd(II) on both microorganisms. The maximal efficiency of retention of Pt(IV) on yeast and fungi was obtained at acidic solutions (pH 2.0 for Pt(IV) and pH 2.5–3.5 for Pd(II)). The equilibrium of the biosorption process was attained within 45 min. The best interpretation for the experimental data was given by the Langmuir isotherm. Kinetics of the Pt and Pd adsorption process suit well the pseudo-second-order kinetics model. Fungi Aspergillus sp. shows higher adsorption capacity for both metals than yeast Saccharomyces sp. The maximum adsorption capacity of fungi was 5.49 mg g−1 for Pt(IV) and 4.28 mg g−1 for Pd(II). The fungi possess the ability for efficient removal of studied ions from different wastewater samples (sewage and road run-off water). It was also demonstrated, that quantitative recovery of Pd from industrial wastes could be obtained by biosorption using Aspergillus sp.

Selective Separation of Pd(II) on Pyridine-Functionalized Graphene Oxide Prepared by Radiation-Induced Simultaneous Grafting Polymerization and Reduction

The recovery of precious metals like palladium (Pd) from secondary resources has enormous economic benefits and is in favor of resource reuse. In this work, we prepared a high efficiency pyridine-functionalized reduced graphene oxide (rGO) adsorbent for selective separation of Pd(II) from simulated electronic waste leachate, by one-pot γ-ray radiation-induced simultaneous grafting polymerization (RIGP) of 4-vinylpyridine (4VP) from graphene oxide (GO) and reduction of GO. The poly(4-vinylpyridine)-grafted reduced graphene oxide (rGO-g-P4VP) exhibits fast adsorption kinetics and high maximum adsorption capacity. The adsorption capacity is 105 mg g^-1 in the first minute and reaches equilibrium within 120 min. The adsorption process follows the Langmuir model, from which the maximum adsorption capacity of Pd(II) is estimated to be 177 mg g^-1. We also proved that the adsorption mechanism of Pd(II) on rGO-g-P4VP involves both ion exchange and coordination adsorption by XPS analysis. Most importantly, the loss of oxygen-containing groups due to reduction of GO not only facilitates the separation of adsorbent from aqueous solution but also reduces the electrostatic repulsion toward Pd(II)Cl₄^2- in hydrochloric acid solution, leading to a higher adsorption selectivity of Pd(II) over some common metal cations in electronic waste including Fe(III), Cu(II), and Al(III) compared with poly(4-vinylpyridine)-grafted graphene oxide (GO-g-P4VP) prepared by atom transfer radical polymerization. Other precious metals like Pt(IV) and Au(III) can also be recovered easily and selectively by rGO-g-P4VP. This work demonstrates that rGO-g-P4VP prepared by the facile RIGP is a promising adsorbent for recovery of precious metals from secondary resources like electronic waste leachate.

Characterization of the residual biochemical components of sequentially extracted banana peel biomasses and their environmental remediation applications

After consumption of the inner fleshy fruit, the banana peel like many other fruit peels is usually disposed of unprocessed. For sustainable development, agro-wastes including banana peels need to be converted into valuable products that will be beneficial to human and the environment. In this study, biochemical components including lipids, proteins and structural polysaccharides were sequentially extracted from banana peel, and the residuals were characterized by FE-SEM/EDX, FTIR, XRD, TGA/DSC, XPS and elemental analysis. Owing to rapid industrialization, toxic species such as metals and dyes are consistently released into the aquatic environments. Therefore, the residual biomass samples were evaluated for environmental remediation application. The adsorption performances were outstanding, with uptakes reaching 1034, 279 and 152 mg/g, for methylene blue, lead and platinum, respectively. This study thus suggests that sequential extraction and detailed characterization are useful for identification of key contributing components for development of high-performance agro-waste-based adsorbents for water treatment.

Role of EDTA on the Pd(II) adsorption characteristics of chitosan cross-linked 3-amino-1,2,4-triazole-5-thiol derivative from synthetic electroless plating solutions

This article targets the efficacy of chitosan cross-linked 3-Amino-1,2,4-triazole-5-thiol derivative for the recovery of Pd from synthetic electroless plating solutions (ELP) whose solution chemistry complexity is brought forward with ethylenediaminetetraacetic acid (EDTA), ammonium hydroxide (NH₄OH), and surfactant (cetyl trimethyl ammonium bromide (CTAB)). Batch adsorption characteristics of the resin were investigated in the parametric range of 2-10 pH, 0.2-2 g L^-1 adsorbent dosage, 5-1080 min contact time, 50-300 mg L^-1 Pd concentration and 25-60 °C operating temperature. Equilibrium, kinetic and thermodynamic model fitness studies were also considered. Pd(II) adsorption characteristics were determined using NaOH, KOH and HCl solutions with variant eluent concentrations (0.1-2 N). The solution chemistry complexity has been evaluated to have profound impact in detrimentally influencing Pd sorption characteristics of the CH-AZ resin. The resin has been characterized to be highly effective for Pd removal from synthetic ELP solutions but with moderate efficacy towards the noble metal recovery and reuse.

Removal of vanadium and palladium ions by adsorption onto magnetic chitosan nanoparticles

Chitosan (CS), synthesized from chitin chemically extracted from shrimp shells, was used for the synthesis of magnetic chitosan nanoparticles (Fe₃O₄-CSN), which makes the adsorbent easier to separate. Fe₃O₄-CSN was used for the removal of toxic metals such as vanadium (V(V)) and palladium (Pd(II)) ions from aqueous solutions. Influencing factors on the adsorption process such as pH, contact time, adsorbent dosage, and agitation speed were investigated. A competitive adsorption of V(V) and Pd(II) ions for the active sites was also studied. The monolayer maximum adsorption capacities (Q_m) of 186.6 and 192.3 mg/g were obtained for V(V) and Pd(II) ions, respectively. The pseudo-second-order equation gave the best fit for the kinetic data, implying that chemisorption was the determining step. Freundlich model yielded a much better fit than the other adsorption models assessed (Langmuir, Temkin and Dubinin-Radushkevich). Thus, the adsorption of V(V) and Pd(II) ions onto Fe₃O₄-CSN is a combination of physical and chemical adsorption, as based on the kinetics and equilibrium study. Generally, physical adsorption is the mechanism that governs the system, while chemical adsorption is the slowest adsorption step that takes place. Thermodynamic studies displayed that the adsorption process was exothermic and spontaneous. Removal efficiencies of 99.9% for V(V) and 92.3% for Pd(II) ions were achieved, implying that Fe₃O₄-CSN adsorbent had an excellent ability for the removal of the metal ions from real industrial wastewaters without remarkable matrix effect. Graphical abstract ᅟ.

Wastes generated by automotive industry – Spent automotive catalysts

Rhodium, ruthenium, palladium, and platinum are classified as platinum group metals (PGM). A demand for PGM has increased in recent years. Their natural sources are limited, therefore it is important, and both from economical and environmental point of view, to develop effective process to recover PGM from waste/secondary sources, such as spent automotive catalysts. Pyrometallurgical methods have always been used for separation of PGM from various materials. However, recently, an increasing interest in hydrometallurgical techniques for the removal of precious metals from secondary sources has been noted. Among them, liquid-liquid extraction by contacting two liquid phases: aqueous solution of metal ions and organic solution of extractant is considered an efficient technique to separate valuable metal ions from solutions after leaching from spent catalysts.

Adsorption of platinum ion from "aged" aqueous solution: application and comparative study between purified MWCNTs and triphenylphosphine MWCNTs

This study entails adsorption attempt of platinum ion from "aged" aqueous solution with purified multiwalled carbon nanotubes and tryphenylphosphine-linked multiwalled carbon nanotubes (1) and (2) (Tpp-MWCNTs (1) and Tpp-MWCNTs (2)). The aims were to produce and use purified MWCNTs, Tpp-MWCNTs (1) and (2) and compare their adsorption capacity. These adsorbents were characterised with SEM, FTIR, XPS, BET and zeta potential. Tpp-MWCNTs (1) and (2) differ by their atomic percentage content of phosphorus which is 0.7 and 2.6%, respectively. A commercial stock solution (1000 mg/L) of platinum was used for the batch adsorption experiments. The data revealed that the adsorption was dependent on the following parameters: pH, contact time and initial concentration. The adsorbents attained higher adsorption capacity at pH 2 with an initial concentration of 7.9 mg/L, adsorbent dose of 0.8 g/L, contact time of 60 min at room temperature (RT), whereas 48.25, 40.06 and 41.31 mg/g were adsorbed from 20 mg/L by purified MWCNTs, Tpp-MWCNTs (1) and (2), respectively. The results are quite interesting and show that purified MWCNTs are better than Tpp-MWCNTs under the experimental conditions. The data was best described by the Langmuir model and the adsorption process occurs on the surface monolayer of the adsorbents. The isotherm studies confirmed that the adsorption of platinum ion is favourable. The findings indicate that the practical adsorption of platinum ion using the adsorbents investigated is useful.

Metal-organic framework-based materials: superior adsorbents for the capture of toxic and radioactive metal ions

Highly efficient removal of metal ion pollutants, such as toxic and nuclear waste-related metal ions, remains a serious task from the biological and environmental standpoint because of their harmful effects on human health and the environment. Recently, highly porous metal-organic frameworks (MOFs), with excellent chemical stability and abundant functional groups, have represented a new addition to the area of capturing various types of hazardous metal ion pollutants. This review focuses on recent progress in reported MOFs and MOF-based composites as superior adsorbents for the efficient removal of toxic and nuclear waste-related metal ions. Aspects related to the interaction mechanisms between metal ions and MOF-based materials are systematically summarized, including macroscopic batch experiments, microscopic spectroscopy analysis, and theoretical calculations. The adsorption properties of various MOF-based materials are assessed and compared with those of other widely used adsorbents. Finally, we propose our personal insights into future research opportunities and challenges in the hope of stimulating more researchers to engage in this new field of MOF-based materials for environmental pollution management.