Speciation and determination of ultra trace amounts of chromium by solidified floating organic drop microextraction (SFODME) and graphite furnace atomic absorption spectrometry

Ultrasensitive fluorescent carbon dot sensor for quantification of soluble and insoluble Cr(VI) in particulate matter

This study investigates advanced functional materials to address the need for practical and affordable analytical techniques for monitoring large amounts of insoluble Cr(VI). N,S-doped fluorescent carbon dots (f-CDs) were fabricated through microwave synthesis, with an average diameter of 10 nm. These f-CDs were explored as potential sensors for detecting Cr(VI) in ambient particulate matter (PM). Laboratory experiments yielded positive results, showing average recoveries of 106.0%, 102.3%, 96.4%, and 101.7% for PbCrO4, BaCrO4, CaCrO4, and (NH4)2CrO4, respectively. Applying the fluorescence method to field PM samples, a method detection limit (MDL) of 0.32 ng/m3 for total Cr(VI) quantification was achieved. The fluorescence decay of carbon dots remained stable over time, suggesting that Cr(VI) quenching primarily occurred due to the internal filter effect through a static quenching mechanism. These f-CDs exhibited advantageous properties, including affordability, solubility, luminescence, and sensitivity, positioning them as a promising alternative for Cr(VI) detection in ambient air particulates. This study contributes to further developing carbon-based functional materials for detecting metallic air pollutants.

Combination of smartphone digital image colorimetry and UV-Vis spectrophotometry as detection systems with solidified floating organic drop microextraction as preconcentration method for the quantification of methyl red in wastewater samples

In this study, a portable smartphone-based digital image colorimetric system (SDIC) was designed and integrated with a solidified floating organic drop microextraction method (SFODME) for the quantification of methyl red in textile wastewater samples. The RGB (red, green, and blue) data were evaluated for each captured image, and the green channel was selected for quantification due to its linear response for the analyte. Under optimal conditions, an acceptable linear range was recorded for the analyte. The proposed method recorded a limit of detection (LOD) value of 0.046 mg/L. The developed microextraction method was also combined with UV-Vis spectrophotometry, which recorded an LOD value of 0.012 mg/L. Real sample analysis was carried out with textile wastewater samples to check the applicability/accuracy of the developed method, using a matrix matching calibration strategy to enhance quantification accuracy. Satisfactory percent recoveries in the range of 93.3%-114.3% and 92%-92.7% were recorded for the SFODME-SDIC and SFODME-UV methods, respectively.

A novel separation and preconcentration methodology based on direct immersion dual-drop microextraction for speciation of inorganic chromium in environmental water samples

In this study, for the first time, a novel separation and preconcentration method of direct immersion dual-drop microextraction (DIDDME) was proposed for the species of inorganic chromium (Cr(III) and Cr(VI)) followed by graphite furnace atomic absorption spectrometry detection. The methodology is based on that two organic drops hold on the needle tips of microsyringes were concurrently immersed in a stirred sample solution. Each drop contains a chelating reagent, which can react with a specific species under the same pH value. Therefore, Cr(III) and Cr(VI) can be selectively extracted into different drops. This procedure did not require tedious and complicated pre-oxidation/pre-reduction and centrifugation/filtration operations, which may lead to the risk of sample contamination and analysis errors. Main parameters influencing separation, preconcentration and identification of the target species were investigated. An enrichment factor of 400-fold was obtained for Cr(III) and Cr(VI). Under the optimized conditions, detection limits for this method were 1.1 ng L^-1 and 1.4 ng L^-1 for Cr(III) and Cr(VI) with relative standard deviations of 5.1 and 6.3%, respectively. This procedure was applied for the separation, preconcentration and determination of Cr(III) and Cr(VI) in environmental water samples and certified reference materials with satisfactory results. Recoveries of spiked experiments ranged from 86.0 to 112%.

N,Zn-Doped Fluorescent Sensor Based on Carbon Dots for the Subnanomolar Detection of Soluble Cr(VI) Ions

The development of a fluorescent sensor has attracted much attention for the detection of various toxic pollutants in the environment. In this work, fluorescent carbon dots (N,Zn-CDs) doped with nitrogen and zinc were synthesized using citric acid monohydrate and 4-pyridinecarboxyaldehyde as carbon and nitrogen sources, respectively. The synthesized N,Zn-CDs served as an "off" fluorescence detector for the rapid and sensitive detection of hexavalent chromium ions (Cr(VI)). The zinc metal integrated into the heteroatomic fluorescent carbon dot played a functional role by creating a coordination site for the hydrogen ions that were displaced after the addition of Cr to the solution matrix. The stepwise addition of Cr(VI) effectively quenched the fluorescence intensity of the N,Zn-CDs, and this phenomenon was attributed to the internal filter effect. A low detection limit of 0.47 nmol/L for Cr(VI) was achieved in the fluorescence experiments. Real water samples were used to evaluate the practical application of N,Zn-CDs for the quantification of Cr(VI). The results show acceptable recoveries and agreement with ion chromatography-ultraviolet spectrometry results. These good recoveries indicate that the fluorescence probe is very well suited for environmental measurements.

Hydrogen-Bond-Connected 2D Zn-LMOF with Fluorescent Sensing for Inorganic Pollutants and Nitro Aromatic Explosives in the Aqueous Phase

Herein, a novel luminescent Zn-LMOF, JLU-MOF109 ([Zn(PBBA)(H₂O)]·3DMF·2H₂O, PBBA = 4,4'-(2,6-pyrazinediyl)bis[benzoic acid], DMF = N,N-dimethylformamide), was successfully synthesized under solvothermal conditions. Zinc ions are connected by PBBA ligands to form two-dimensional (2D) layers, and the layers are further propped up through hydrogen-bonding interactions. JLU-MOF109 exhibits good sensitivity to inorganic pollutants, Fe³⁺ and Cr₂O₇^2-, as well as nitro aromatic explosives, 2,4,6-trinitrophenol and 2,4-dinitrophenol. JLU-MOF109 exhibits high K_sv (at 10⁴ M^-1 level) and low limit of detection values (∼10^-6 mol/L) for the abovementioned hazardous pollutants, which is better than a majority of previously reported MOF-based fluorescent sensors. With good stability in the aqueous phase, JLU-MOF109 can serve as a promising chemical sensor for pollutant detection in wastewater.

Quantification and the sources identification of total and insoluble hexavalent chromium in ambient PM: A case study of Aktobe, Kazakhstan

Hexavalent chromium (Cr(VI)), a known carcinogen, emanates from both anthropogenic and natural sources. A pilot study of the ambient Cr(VI) concentrations was conducted at the center of Aktobe which is a few kilometers away from major industrial chromium plants. Total Cr(VI) concentrations were measured in the fall and winter seasons with mean values (S.D) of 5.30 (2.16) ng/m³ and 2.26 (1.80) ng/m³, respectively. Insoluble Cr(VI) levels were 4.80 (1.96) and 2.19 (1.75) ng/m³ for the fall and winter, respectively. The total and insoluble Cr(VI) concentrations in the fall season were significantly higher than in winter, likely due to the higher rate of Cr(III) oxidation in the presence of ozone and ROS in fall compared to the rate of Cr(VI) reduction in the presence of VOCs at higher temperatures. On average, total Cr(VI) constituted 34.49% of the total Cr concentrations suggesting that the dominant valence state of Cr in the atmosphere is Cr(III). The previous reference values of exposure to Cr(VI) must be revisited by taking into account the insoluble Cr(VI) concentration since it is more prevalent in the atmosphere compared to soluble Cr(VI). The influence of the chromium plants as potential sources was not obvious in this study.

Deep eutectic solvent decomposition-based microextraction for chromium determination in aqueous environments by atomic absorption spectrometry with electrothermal atomization

A sensitive, rapid, and simple procedure for the determination of traces of chromium species in natural and waste waters after microextraction using a quasi-hydrophobic deep eutectic solvent based on tetrabutylammonium bromide and hexanoic acid was developed for the first time. In the developed procedure, the deep eutectic solvent played the role of a source of dispersive agent, chelating agent, and extraction solvent. During mixing the aqueous phase with the quasi-hydrophobic deep eutectic solvent, dissolution and dissociation of tetrabutylammonium bromide took place. Tetrabutylammonium bromide acted as a dispersive agent for the hexanoic acid emulsion formation and as an agent for the formation of an ion-association complex with Cr(vi) in an aqueous phase followed by its extraction in hexanoic acid. The organic phase containing Cr(vi) complexes was analyzed by atomic absorption spectrometry with electrothermal atomization. The enrichment factor value was 53, the extraction recovery was 89%, and the limit of detection calculated from a blank test, based on 3σ, was 5.0 ng L-1. The values of intra-day RSD and inter-day RSD were 3.9% and 5.0%, respectively.

On-Line Separation and Determination of Trivalent and Hexavalent Chromium with a New Liquid Membrane Annular Contactor Coupled to Inductively Coupled Plasma Optical Emission Spectrometry

We describe a new on-line sensitive and selective procedure for the determination of trivalent and hexavalent chromium in liquid samples by a tailor-made contactor (TMC), specifically a liquid membrane annular TMC, coupled with inductively coupled plasma with optical detection. The TMC was designed and developed to integrate the extraction and stripping phases of the analyte in one module to minimize the membrane solvent’s consumption and maximize the speed of transport through the liquid membrane. Moreover, the particular geometry studied, which consists of two coaxial hollow fibers, allows the TMC to be used for both separating and preconcentrating purposes. Both (−)-N-dodecyl-N-methylephedrinium bromide (30 mM) in dichloroethane and HNO3 (0.75 M) were used as the liquid membrane and receiving solution, respectively. The proposed method’s performance was evaluated in terms of the hexavalent chromium extraction efficiency and the coefficient of variation percentages; these were higher than 85% and less than 5%, respectively. In addition, the proposed procedure was applied to two real samples: a tap water sample and an eluate from solid urban waste. In both cases, the analytical performances were good and comparable to those obtained using synthetic standard solutions.

Determination of prohibited lead and cadmium traces in hair dyes and henna samples using ultrasound assisted-deep eutectic solvent-based liquid phase microextraction followed by microsampling-flame atomic absorption spectrometry

In this study ultrasound assisted-deep eutectic solvent-based liquid phase microextraction followed by microsampling-flame atomic absorption spectrometry was developed to determine prohibited lead and cadmium traces in hair dye and henna samples. For this purpose, deep eutectic solvent, prepared from choline chloride and phenol, was used as an extraction solvent, dithizone was used as a complexing agent, and THF was used as an aprotic solvent. All parameters that affect extraction efficiency, such as pH, the DES volume and composition, the extraction time, the amount of dithizone, were optimized. Under the optimal conditions, for Pb(ii) and Cd(ii), enhancement factors of 92 and 57, LODs of 2.5 μg L^-1 and 0.75 μg L^-1, LOQs of 7.8 μg L^-1 and 2.5 μg L^-1, linear working ranges of 10-250 μg L^-1 and 2.5-50 μg L^-1, were obtained, respectively. Relative standard deviation (n = 10) was calculated to be 2.7 for 100 μg L^-1 of Pb(ii) and 2.1 for 25 μg L^-1 of Cd(ii). The matrix effect was investigated by comparing the solvent-based calibration curve with the matrix-matched calibration curve. The determination of lead and cadmium in hair dye and henna samples without being affected by the sample matrix was successfully performed. The lead content was between 1.3 and 6.5 μg g^-1, and the cadmium content was between 0.028 and 0.54 μg g^-1 for the selected hair dye and henna samples.

Two Novel BODIPY-Functional Magnetite Fluorescent Nano-Sensors for Detecting of Cr(VI) Ions in Aqueous Solutions

In this study, we developed two different very sensitive magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors for the selective detection of Cr(VI) ions. The Cr(VI) metal ions sensing is based on the fluorescent quenching of BODIPY functionalized with Fe₃O₄@SiO₂-TPED and Fe₃O₄@SiO₂-TMPTA nanoparticles in the ethanol-water environment. Characterization of the newly synthesized fluorescent BODIPY compound was performed on a ¹H and ¹³C-NMR spectrometer. The morphology, chemical and physical properties of the sensing nano-sensors were studied by transmission thermogravimetric analysis (TGA), X-ray diffraction (XRD), energy dispersive X-ray (EDX), scanning electron microscopy (SEM), FT-IR spectroscopy, and transmission electron microscopy (TEM). UV-visible and fluorescent spectroscopy were used to characterize BODIPY functionalized magnetite fluorescent nano-sensors. Characterization measurements revealed that the mean particle diameter of magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors was 18.5 and 19 nm, respectively. The magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors (0.1 gL^-1 in EtOH/H₂O, v/v (3/7)) showed fluorescence quenching responses towards Cr(VI) ions in the medium at pH:1. The fluorescence quenches of the magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors by Cr(VI) were completed in first 5 and 3 min. Respectively. These features provide potential uses of BODIPY functionalized magnetite fluorescent nano-sensors (Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY) as a new class of non-toxic sensors for environmental applications. Graphical Abstract.

Dispersed Solidified Fine Droplets Based on Sonication of a Low Melting Point Deep Eutectic Solvent: a Novel Concept for Fast and Efficient Determination of Cr(VI) in Urine Samples

Cr(VI) has carcinogenic effects, so determination of trace amount of chromium in human body such as urine has a great deal of importance. In this work, a novel microextraction method was developed based on solidification of dispersed fine droplets (SDFD) of a low melting point deep eutectic solvent (DES), produced with the aid of sonication, for fast and efficient determination of Cr(VI) in urine samples. Cr(VI) contents of the human urine samples were first complexed using 1,5-diphenylcarbazone at pH ≈ 2.0 and then extracted by the method. A cloudy solution was achieved by the sonication of a microliter volume of a new water-immiscible DES consisting of benzyltriphenylphosphonium bromide (BTPPB) and phenol. Low freezing point of DES makes it possible to use simple, precise, and fast collection of the extraction phase by solidification and the subsequent centrifugation. Finally, the sedimented phase was diluted with methanol and analyzed by electrothermal atomic absorption spectrometry (ETAAS). The influences of the main factors on the efficiency of the procedure were investigated by a four-factor central composite design (CCD). Under the optimum conditions, the calibration curve was linear within the range of 10-1000 ng L^-1. The intra- and inter-day RSD% values of 2.6 and 4.7% were obtained at the concentration of 50.0 ng L^-1, respectively. The limits of detection (LOD) and quantification (LOQ) were calculated as 2.0 and 7.0 ng L^-1, respectively. Moreover, compared to the other approaches, the proposed method presented better or comparable analytical performance and provided accurate, precise, and reliable results for trace analysis of Cr(VI) in urine samples.

Practical immune-barometer sensor for trivalent chromium ion detection using gold core platinum shell nanoparticle probes

The technology progress of biosensors has markedly improved healthcare, disease diagnosis, environment monitoring, and food safety control over the past few decades. However, development of sensitive, robust, low-cost and portable assays for on-site bioanalysis is still a great challenge. In this study, we described a portable, feasible and miniaturized immune-barometer sensor (IBS), which can be used to sensitively measure the changes in a pressure signal, and we applied this IBS in the detection of Cr(iii). In this system, a competitive immunoassay was incorporated as a signaling technique for Cr(iii) detection. To generate a signal of pressure changes (ΔP), Au@PtNPs (gold core platinum shell nanoparticles) were prepared for decomposing H₂O₂ to generate O₂ in a sealed chamber. The expansion of gas volume was accurately detected using a sensitive barometer in the sealed reaction chamber. The ΔP correlated well with Cr(iii) concentrations ranging from 0.39 to 25 ng mL^-1. The limit of detection (LOD) of the IBS was estimated to be as low as 0.35 ng mL^-1. Furthermore, the IBS has high specificity and high recovery for Cr(iii) detection in tap water samples (97.5%-108.7%) and in the Pearl River water samples (95.6%-110.2%). Compared with the traditional enzyme-linked immunosorbent assay (ELISA), the IBS was observed to be more sensitive, of low-cost and portable for the on-site detection of Cr(iii). Therefore, the IBS is a promising potential method for the detection of heavy metals in aqueous solutions and many other fields.

A sonochemical synthesis of cyclodextrin functionalized Au-FeNPs for colorimetric detection of Cr6+ in different industrial waste water

This paper describes a simple, selective and sensitive colorimetric sensing of Cr⁶⁺ ions using β-Cyclodextrin (β-CD) functionalized gold-iron nanoparticles (β-CD/Au-FeNPs). The sonochemically synthesized nanoparticles are winered in colour due to the SPR band of β-CD functionalized bimetalic nanoparticles Au-FeNPs. The capping and stabilizing of Au-FeNPs by redox β-CD is confirmed by FT-IR. The particles are spherical in shape and it posses the effective diameter of 18-20 nm. Under optimized conditions, in the presence of Cr⁶⁺ the wine red Au-FeNPs solution was turned to colourless, accompanying the broadening and red shifting of SPR band. The ratio between the absorbance wavelength at 573 nm to 535 nm (A₅₇₃/A₅₃₅) is linearly correlated with the Cr⁶⁺ concentrations ranging from 50 nM to 500 nM, with a detection limit of Cr⁶⁺ of 2.5 nM was achieved for the first time using β-CD/Au-FeNPs by spectrophotometry. The selectivity of the β-CD/Au-FeNPs towards other interfering metal ions. Finally the proposed method has been successfully employed for the determination of Cr⁶⁺ ion in various industrial waste water with good recoveries.

A new turn-on fluorimetric method for the rapid speciation of Cr(III)/Cr(VI) species in tea samples with rhodamine-based fluorescent reagent

A new fluorimetric method with rhodamine-based fluorescent agent was developed for the rapid speciation of Cr(III)/Cr(VI) in tea, soil and water samples. The system, which utilizes a fluorescent reagent, was used for the first time after synthesis/characterization of 3',6'-bis(diethylamino)-2-{[(1E)-(2,4-dimethoxyphenyl)methylene] amino}spiro[isoindole-1,9'-xanthen]-3(2H)-one (BDAS). The reagent responds instantaneously at room temperature in a 1:1 stoichiometric manner to the amount of Cr(III). The selectivity of this system for Cr(III) over other metal ions is remarkably high, and its sensitivity is below 0.01mgL^-1 in aqueous solutions which enables a simplification without any pretreatment of the real sample. The method has a wide linear range of 0.1-10mgL^-1 and a detection limit of 0.15μgL^-1 for Cr(III) while the relative standard deviation was 0.1% for 0.1mgL^-1 Cr(III) concentration. The results of detection and recovery experiments for Cr(III) in tea, soil and water were satisfactory, indicating that the method has better feasibility and application potential in the routine determination and speciation of Cr(III)/Cr(VI). The results of analysis of the certified reference material (INCT-TL-1 tea sample and CWW-TM-D waste water) are in good agreement with the certified value.

Graphitic carbon nitride nanosheets as a fluorescent probe for chromium speciation

A fluorometric method was developed for simultaneous determination of Cr(VI) and Cr(III) ions using graphitic carbon nitride nanosheets (g-C₃N₄ NS) as a nanosized fluorescent indicator probe. The g-C₃N₄ NS were prepared using high-temperature carbonization of melamine followed by ultrasonication-assisted liquid exfoliation. The g-C₃N₄ NS display fluorescence with excitation/emission peaks located at 320 and 450 nm. The chromium speciation is based on the quenching of g-C₃N₄ NS fluorescence. The total concentration of chromium is determined after oxidation of Cr(III) to Cr(VI). The Cr(III) content was then calculated by subtracting the concentration of Cr(VI) from that of total chromium. The effects of pH value, probe amount, and contact time are optimized. Under optimum conditions, calibration plots are linear in the range in the 0.01 to 100 μM chromium concentration range. The limit of detection is 3 nM for for Cr(VI). The intra- and inter-day relative standard deviations (RSD) of the assay are 3.6-7.5% and 4.1-8.5%, respectively. The indicator probe was applied to the determination of chromium species in spiked water and food samples, and recoveries were satisfactory (93.9-107.0%). Graphical abstract Graphitic carbon nitride nanosheets are synthesized by melamine carbonization and employed for Cr speciation in water and food real samples. Total Cr(VI) and Cr(VI) are assessed based on the quenching of the fluorescence of nanosheets by Cr(VI).

Optimization of Emulsification-based Liquid Phase Microextraction of Chromium in Seawater of Chabahar Bay for its Speciation by High-Performance Liquid Chromatography

After complexation of Cr(III) and Cr(VI) species with diethyldithiocarbamate (0.2 mmol/L), effective parameters of emulsification-based dispersive liquid microextraction procedure was optimized for its preconcentration in artificial seawater. Triton X-305 as the emulsifying disperser and mixture of the chloroform and carbon tetrachloride as the extraction solvents show a better behavior at sample pH of 6.5. The method was applied for extraction and UV detection (λ = 254 nm) of chromium species of the Chabahar Bay seawater prior to high-performance liquid chromatography (conditions: C18, methanol: acetic acid solution 2% v (85:15), flow rate of 0.8 mL min^-1). Characteristics of the method such as enrichment factor (210 and 228), linear range (10-300 µg L^-1), limit of detection (0.017 and 0.597 µg L^-1) and repeatability, (N = 5, concentration of 100 µg L^-1 %relative standard deviation = 2.6% and 0.45%) were evaluated for Cr(III) and Cr(VI), respectively.

One-step fabrication of high quantum yield sulfur- and nitrogen-doped carbon dots for sensitive and selective detection of Cr(vi)

Easily synthesized high quantum yield sulfur- and nitrogen-doped carbon dots can serve as a very efficient fluorescent sensor for the detection of Cr(vi).

Modification of cellulose paper with polydopamine as a thin film microextraction phase for detection of nitrophenols in oil samples

Polydopamine cellulose paper was used as a novel extraction phase to detect nitrophenols in oil samples.

Silver Nanoparticle-Enhanced Resonance Raman Sensor of Chromium(III) in Seawater Samples

Tris(hydroxymethyl)aminomethane ethylenediaminetetraacetic acid (Tris-EDTA), upon binding Cr(III) in aqueous solutions at pH 8.0 on silver nanoparticles (AgNPs), was found to provide a sensitive and selective Raman marker band at ~563 cm-1, which can be ascribed to the metal-N band. UV-Vis absorption spectra also supported the aggregation and structural change of EDTA upon binding Cr(III). Only for Cr(III) concentrations above 500 nM, the band at ~563 cm-1 become strongly intensified in the surface-enhanced Raman scattering spectra. This band, due to the metal-EDTA complex, was not observed in the case of 50 mM of K+, Cd2+, Mg2+, Ca2+, Mn2+, Co2+, Na+, Cu2+, NH4+, Hg2+, Ni2+, Fe3+, Pb2+, Fe2+, and Zn2+ ions. Seawater samples containing K, Mg, Ca, and Na ion concentrations higher than 8 mM also showed the characteristic Raman band at ~563 cm-1 above 500 nM, validating our method. Our approach may be useful in detecting real water samples by means of AgNPs and Raman spectroscopy.

Simultaneous spectrophotometric determination of Fe(III) and Al(III) using orthogonal signal correction-partial least squares calibration method after solidified floating organic drop microextraction

A solidified floating organic drop microextraction (SFODME) procedure was developed for the simultaneous extraction and preconcentration of Fe(III) and Al(III) from water samples. The method was based on the formation of cationic complexes between Fe(III) and Al(III) and 3,5,7,2',4'-pentahydroxyflavone (morin) which were extracted into 1-undecanol as ion pairs with perchlorate ions. The absorbance of the extracted complexes was then measured in the wavelength range of 300-450 nm. Finally, the concentration of each metal ion was determined by the use of the orthogonal signal correction-partial least squares (OSC-PLS) calibration method. Several experimental parameters that may be affected on the extraction process such as the type and volume of extraction solvent, pH of the aqueous solution, morin and perchlorate concentration and extraction time were optimized. Under the optimum conditions, Fe(III) and Al(III) were determined in the ranges of 0.83-27.00 μg L(-1) (R(2)=0.9985) and 1.00-32.00 μg L(-1) (R(2)=0.9979) of Fe(III) and Al(III), respectively. The relative standard deviations (n=6) at 12.80 μg L(-1) of Fe(III) and 17.00 μg L(-)(1) of Al(III) were 3.2% and 3.5%, respectively. An enhancement factors of 102 and 96 were obtained for Fe(III) and Al(III) ions, respectively. The procedure was successfully applied to determination of iron and aluminum in steam and water samples of thermal power plant; and the accuracy was assessed through the recovery experiments and independent analysis by electrothermal atomic absorption spectroscopy (ETAAS).

Supramolecular solvent-based dispersive liquid–liquid microextraction of copper from water and hair samples

A supramolecular solvent based dispersive liquid–liquid microextraction (SM-DLLME) procedure has been established for the separation and preconcentration of Cu(ii) before its determination by microsampling flame atomic absorption spectrometry.

Selective sampling and measurement of Cr (VI) in water with polyquaternary ammonium salt as a binding agent in diffusive gradients in thin-films technique

A diffusive gradients in thin films (DGT) device with polyquaternary ammonium salt (PQAS) as a novel binding agent (PQAS DGT) combined with graphite furnace atomic absorption spectrometry (GFAAS) was developed for the selective sampling and measurement of Cr (VI) in water. The performance of PQAS DGT was independent of pH 3-12 and ionic strength from 1 × 10(-3) to 1 molL(-1). DGT validation experiments showed that Cr (VI) was measured accurately as well as selectively by PQAS DGT, whereas Cr (III) was not determined quantitatively. Compared with diphenylcarbazide spectrophotometric method (DPC), the measurement of Cr (VI) with PQAS DGT was agreement with that of DPC method in the industrial wastewater. PQAS-DGT device had been successfully deployed in local freshwater. The concentrations of Cr (VI) determined by PQAS DGT coupled with GFAAS in Nuer River, Ling River and North Lake were 0.73 ± 0.09 μg L(-1), 0.50 ± 0.07 μg L(-1) and 0.61 ± 0.07 μg L(-1), respectively. The results indicate that PQAS DGT device can be used for the selective sampling and measurement Cr (VI) in water and its detection limit is lower than that of DPC method.

Selective and sensitive speciation analysis of Cr(VI) and Cr(III) in water samples by fiber optic-linear array detection spectrophotometry after ion pair based-surfactant assisted dispersive liquid-liquid microextraction

A simple ion pair based-surfactant assisted dispersive liquid-liquid microextraction (IP-SA-DLLME) was evaluated for extraction and preconcentration of Cr(VI) and Cr(III) in aqueous samples. In this method, which was used for the first time for chromium speciation analysis, sodium dodecyl sulfate (SDS) was used as both ion-pairing and disperser agent. Cr(VI) ions were converted into their cationic complex with 1,5-diphenylcarbazide (DPC) and then extracted into 1-octanol dispersed in aqueous solution. Cr(III) ion also can be determined by this procedure after oxidation to Cr(VI). After extraction and phase separation, upper organic phase was transferred to a micro cell of a fiber optic-linear array detection spectrophotometry (FO-LADS). The effects of various parameters on the extraction recovery were investigated. Under the optimized conditions and preconcentration of 10 mL of sample, the enrichment factor of 159 and the detection limit of 0.05 μgL(-1) were obtained. Validation of the method was performed by spiking-recovery method and comparison of results with those obtained by ET-AAS method.

Room temperature ionic liquids enhanced the speciation of Cr(VI) and Cr(III) by hollow fiber liquid phase microextraction combined with flame atomic absorption spectrometry

A new method for the speciation of Cr(VI) and Cr(III) based on enhancement effect of room temperature ionic liquids (RTILs) for hollow fiber liquid phase microextraction (HF-LPME) combined with flame atomic absorption spectrometry (FAAS) was developed. Room temperature ionic liquids (RTILs) and diethyldithiocarbamate (DDTC) were used enhancement reagents and chelating reagent, respectively. The addition of room temperature ionic liquids led to 3.5 times improvement in the determination of Cr(VI). In this method, Cr(VI) reacts with DDTC yielding a hydrophobic complex, which is subsequently extracted into the lumen of hollow fiber, whereas Cr(III) is remained in aqueous solutions. The extraction organic phase was injected into FAAS for the determination of Cr(VI). Total Cr concentration was determined after oxidizing Cr(III) to Cr(VI) in the presence of KMnO(4) and using the extraction procedure mentioned above. Cr(III) was calculated by subtracting of Cr(VI) from the total Cr. Under optimized conditions, a detection limit of 0.7 ng mL(-1) and an enrichment factor of 175 were achieved. The relative standard deviation (RSD) was 4.9% for Cr(VI) (40 ng mL(-1), n=5). The proposed method was successfully applied to the speciation of chromium in natural water samples with satisfactory results.

Sensitive and selective SERS probe for trivalent chromium detection using citrate attached gold nanoparticles

In this article, we have demonstrated a sensitive and selective surface enhanced Raman spectroscopy (SERS) probe, based on citrate-capped gold nanoparticles (AuNPs), for trivalent chromium (Cr(3+)) detection. After introducing Tween 20 to a solution of citrate-capped AuNPs, the as-prepared Tween 20/citrate-AuNP probe could recognize Cr(3+) at a 50 × 10(-9) M level in an aqueous medium at a pH of 6.0. Tween 20 can stabilize the citrate-capped AuNPs against conditions of high ionic strength. Due to the chelation between Cr(3+) and citrate ions, AuNPs undergo aggregation. As a result, it formed several hot spots and provided a significant enhancement of the Raman signal intensity through electromagnetic (EM) field enhancements. A detailed mechanism for tremendous SERS intensity change had been discussed. The selectivity of this system toward Cr(3+) was 400-fold, remarkably greater than other metal ions.