Formaldehyde removal by potted plant-soil systems

Overexpression of E. coli formaldehyde metabolic genes pleiotropically promotes Arabidopsis thaliana growth by regulating redox homeostasis

Formaldehyde (FA) is a hazardous pollutant causing acute and chronic poisoning in humans. While plants provide a natural method of removing FA pollution, their ability to absorb and degrade FA is limited. To improve the ability of plants to degrade FA, we introduced the E. coli FrmA gene into Arabidopsis thaliana alone (FrmAOE lines) or with FrmB (FrmA/BOE lines). The transgenic seedlings had approximately 30 % longer primary roots and a 20 % higher fresh weight than the control plants. The transgenic plants started flowering four days earlier and had about 30 % more kilo-seed weight than the wild type. FrmA/BOE and FrmAOE accumulated 40 % more reactive oxidative species (ROS) in mesophyll protoplasts and leaf tissue than wild-type plants under normal conditions. In the presence of FA, they produced 92 % and 26 % more glutathione (GSH) and 6 % and 4 % more ascorbate (AsA), respectively, compared to wild-type plants and thus scavenged FA-induced ROS more effectively. The degradation efficiency of the transgenic leaf extract for FA was 73 % and 44 % higher than that of the wild type, respectively, which was also emphasized by a 2 %-26 % increase in the activity of antioxidant enzymes such as SOD and APx. By revealing the functional divergence between microbial and plant FA metabolic pathways, our work has not only highlighted the promising pluripotency of microbial genes in promoting normal plant growth and detoxifying organic pollutants simultaneously, but also revealed another layer of complexity of plant defense mechanisms against organic toxins related to ROS scavenging.

The formaldehyde stress on photosynthetic efficiency and oxidative stress response of moss Racomitrium japonicum L

Introduction

Formaldehyde is a common gaseous pollutant emitted by buildings and decorative materials. In recent years, growing concerns have been raised regarding its harmful effects on health in indoor air. Therefore, this study aims to investigate the physiological and photosynthetic response mechanisms of Racomitrium japonicum under formaldehyde stress.

Methods

R. japonicum was exposed to dynamic fumigation with formaldehyde for 7 days, with each day comprising an 8-h exposure period within a sealed container. The effects on plant structure, pigment content, photosynthetic efficiency, and reactive oxygen species (ROS) generation were assessed.

Results and discussion

Our findings revealed that formaldehyde stress caused structural damage, reduced pigment content, decreased photosynthetic efficiency, and increased ROS production in R. japonicum. Significantly, distinct stress-response pathways were observed at different formaldehyde concentrations. In response to low and moderate formaldehyde concentrations, R. japonicum activated its antioxidant enzyme system to mitigate ROS accumulation. In contrast, the high-concentration treatment group demonstrated suppressed antioxidant enzyme activity. In response, R. japonicum used nonphotochemical quenching and activated cyclic electron flow to mitigate severe cellular damage. This study provides an in-depth understanding of the physiological changes in R. japonicum under formaldehyde stress, elucidating its response mechanisms. The findings offer valuable insights for developing effective indoor formaldehyde monitoring and purification methods.

Removal of formaldehyde from indoor air by potted Sansevieria trifasciata plants: dynamic influence of physiological traits on the process

Plant-based removal of indoor formaldehyde is a widely studied method, yet little is known about the dynamic changes in this process. In this study, potted Sansevieria trifasciata Prain plants were exposed to 5-ppm formaldehyde gas concentration for 7 days. The results showed that formaldehyde exposure led to plant stress, affected photosynthesis, and damaged membrane lipids, as evidenced by a decrease in chlorophyll content, an increase in Chl a/b ratio and malondialdehyde content. However, the formaldehyde removal ability of the plants increased over the first 5 days, peaking at 18.02 mg h-1 kg-1 dry weight on the 5th day. This trend was correlated with changes in various indicators in the plant roots, including phytohormone and antioxidant enzymes. Notably, catalase activity in the roots behaved differently from other indicators. The indicators in the leaves showed turning points around the 3rd day due to the direct exposure of the leaves to formaldehyde. The relative abundance of endophytes indicated an increase in plant growth-promoting bacteria, which helped the plant cope with formaldehyde stress. The study suggests that under formaldehyde stress, plants manage active oxygen content by increasing phytohormones and regulating redox reactions. This enhances their tolerances to formaldehyde, thereby improving their ability to remove formaldehyde and aiding recovery after formaldehyde exposure.

Fabrication of an Amino Functionalized Paper-Based Material for Highly Efficient Detection and Adsorption of Formaldehyde

An amino functionalized paper-based material that utilized amino functionalized polymer particles as sensing probes and adsorption sites was fabricated via internal sizing technology for application in formaldehyde detection and adsorption. A large specific surface area and the porous structure of the paper fibers enable the application of the composite paper-based material as a sensor at low concentrations of primary amine groups. The material reacts with low levels of formaldehyde, resulting in a concentration-based change in the pH, which is rapidly expressed as a color change. After exposure to formaldehyde (0.02 mg/m3) for 10 min, the color of the composite paper-based material changed from pink to brown, demonstrating the high sensitivity of the material, and this transition could be clearly observed using the naked eye. Additionally, the composite paper-based material acts as an adsorbent at a high content of amino groups, owing to a rapid addition reaction with formaldehyde, exhibiting a high adsorption capacity. Considering the high sensitivity, adsorption capacity, and adsorption speed for formaldehyde, the as-developed composite paper-based material exhibits promising application potential in the field of formaldehyde detection and adsorption.

Endophyte-assisted non-host plant Tillandsia brachycaulos enhance indoor formaldehyde removal

This study investigated the use of endophyte-assisted Tillandsia brachycaulos to enhance formaldehyde removal in indoor environments. A formaldehyde-degrading endophyte from the root of Epipremnum aureum, Pseudomonas plecoglossicida, was identified and used for inoculation. Among the inoculation methods, spraying proved to be the most effective, resulting in a significant 35 % increase in formaldehyde removal after 36 hours. The results of the light exposure experiment (3000 Lux) demonstrate that an increase in light intensity reduces the efficiency of the Tillandsia brachycaulos-microbial system in degrading formaldehyde. In a 15-day formaldehyde fumigation experiment at 2 ppm in a normal indoor environment, the inoculated Tillandsia brachycaulos exhibited removal efficiency ranging from 42.53 % to 66.13 %, while the uninoculated declined from 31.62 % to 3.17 %. The Pseudomonas plecoglossicida (referred to as PP-1) became the predominant bacteria within the Tillandsia brachycaulos after fumigation. Moreover, the endophytic inoculation effectively increased the resistance and tolerance of Tillandsia brachycaulos to formaldehyde, as evidenced by lower levels of hydroxyl radical, malondialdehyde (MDA), free protein, and peroxidase activity (POD), as well as higher chlorophyll content compared to uninoculated Tillandsia brachycaulos. These findings indicate that the combination of endophytic bacteria and Tillandsia brachycaulos has significant potential for improving indoor air quality.

Phytoremediation of formaldehyde by three selected non-native indoor plant species

Formaldehyde is an organic volatile compound and a commonly used chemical in various construction materials thus causing dwellers to be exposed to it inside a building. Its remediation from indoor air has been carried out through various techniques where potted plants and living walls are at the front foot. It is necessary to study plants under various conditions for their efficiency. We selected three plant species Epipremnum aureum, Chlorophytum comosum, and Spathiphyllum wallisii non-native of Bahrain. These plants were tested under normal conditions in a sealed fumigation box where formaldehyde concentration was kept ∼3 ppm, CO2 ∼ 450 ppm, light intensity 1000 Lx (equal to 13.5 µmol.m-2.s-1), irrigated with tap water. Analysis of Variance (ANOVA) statistical method was performed to test the significant differences of purification efficiencies of the tested indoor plants against HCHO. In addition, the statistical method was used to test the significant difference, if any, of the plants to CO2 emission because of absorbing HCHO. The physical health of plants and their short-term remediation ability reveals that all plants exhibited up to 70% remediation potential and tolerance to remediate the target chemical. It is evident that the impact of local environmental factors on the plants is negligible.

A systematic review on mitigation of common indoor air pollutants using plant-based methods: a phytoremediation approach

Environmental pollution, especially indoor air pollution, has become a global issue and affects nearly all domains of life. Being both natural and anthropogenic substances, indoor air pollutants lead to the deterioration of the ecosystem and have a negative impact on human health. Cost-effective plant-based approaches can help to improve indoor air quality (IAQ), regulate temperature, and protect humans from potential health risks. Thus, in this review, we have highlighted the common indoor air pollutants and their mitigation through plant-based approaches. Potted plants, green walls, and their combination with bio-filtration are such emerging approaches that can efficiently purify the indoor air. Moreover, we have discussed the pathways or mechanisms of phytoremediation, which involve the aerial parts of the plants (phyllosphere), growth media, and roots along with their associated microorganisms (rhizosphere). In conclusion, plants and their associated microbial communities can be key solutions for reducing indoor air pollution. However, there is a dire need to explore advanced omics technologies to get in-depth knowledge of the molecular mechanisms associated with plant-based reduction of indoor air pollutants.

Novel insights into indoor air purification capability of microalgae: characterization using multiple air quality parameters and comparison with common methods

Indoor air purification received more attention recently. In this study, the effects of six common indoor ornamental plants (Epripremnum aureum, Chlorphytum comosum, Aloe vera, Sedum sediforme, Cereus cv. Fairy Castle, and Sedum adolphii) and three kinds of microalgae (Chlorella sp. HQ, Scenedesmus sp. LX1, and C. vulgaris) on the removal of four types of air pollutants (particulate matters less than 2.5 (PM_2.5) and 10 μm (PM₁₀) in size, formaldehyde (HCHO) and total volatile organic compounds (VOC_S)) in test chamber compared with common physical purification methods (high efficiency particulate air filter and nano activated carbon absorption) were investigated. Their effects on oxygen, carbon dioxide, and relative humidity were also evaluated. The results showed that microalgae, especially C. vulgaris, was more suitable for removing PM_2.5 and PM₁₀, and the removal rates were 55.42 ± 25.77% and 45.76 ± 5.32%, respectively. The removal rates of HCHO and VOCs by all three kings of microalgae could reach 100%. Part of ornamental plants took a longer time to achieve 100% removal of HCHO and VOCs. Physical methods were weaker than ornamental plants and microalgae in terms of increased relative humidity and O₂ content. In general, microalgae, especially C. vulgaris could purify indoor air pollutants more efficiently. The above studies provided data and theoretical support for the purification of indoor air pollutants by microalgae.

Phytoremediation of indoor formaldehyde by plants and plant material

Formaldehyde evolves from various household items and is of environmental and public health concern. Removal of this contaminant from the indoor air is of utmost importance and currently, various practices are in the field. Among these practices, indoor plants are of particular importance because they help in controlling indoor temperature, moisture, and oxygen concentration. Plants and plant materials studied for the purpose have been reviewed hereunder. The main topics of the review are, mechanism of phytoremediation, plants and their benefits, plant material in formaldehyde remediation, and airtight environmental and health issues. Future research in the field is also highlighted which will help new researches to plan for the remediation of formaldehyde in indoor air. The remediation capacity of several plants has been tabulated and compared, which gives easy access to assess various plants for remediation of the target pollutant. Challenges and issues in the phytoremediation of formaldehyde are also discussed.Novelty statement: Phytoremediation is a well-known technique to mitigate various organic and inorganic pollutants. The technique has been used by various researchers for maintaining indoor air quality but its efficiency under real-world conditions and human activities is still a question and is vastly affected relative to laboratory conditions. Several modifications in the field are in progress, here in this review article we have summarized and highlighted new directions in the field which could be a better solution to the problem in the future.

Review of IAQ in Premises Equipped with Façade–Ventilation Systems

Poor indoor air quality affects the health of the occupants of a given structure or building. It reduces the effectiveness of learning and work efficiency. Among many pollutants, PM 2.5 and 10 dusts are extremely important. They can be eliminated using mechanical ventilation equipped with filters. Façade ventilation devices are used as a way to improve indoor air quality (IAQ) in existing buildings. For their analysis, researchers used carbon dioxide as a tracer gas. They have shown that façade ventilation devices are an effective way to improve IAQ, but require further analysis due to the sensitivity of façade ventilation devices to the effects of wind and outdoor temperature. In addition, legal regulations in some countries require verification in order to enable the use of this type of solution as a way to improve IAQ in an era characterised by the effort to transform buildings into passive houses (standard for energy efficiency in a building).

Indoor formaldehyde removal by three species of Chlorophytum comosum under dynamic fumigation system: part 2-plant recovery

Spider plants (Chlorophytum comosum) are known to be among the most common easy mountable indoor plants capable of purifying indoor air by absorbing carbon monoxide, formaldehyde, xylene, and many other hazardous gases. In addition, these plants are non-toxic and safe for pets and children. This project is focused on the investigation of the spider plants' capability of the formaldehyde purification under laboratory-controlled parameters of the indoor air environment. Two scenarios including employment of fresh plants as well as recovered ones damaged by 7-day exposure of formaldehyde were considered. A special attention was made to the investigation of physiological indexes of the plant leaves after damage, and whether the spider plant could be reused after its recovery. The physiological characteristics of the recovery period of potted Chlorophytum comosum immediately after 7 days of fumigation with formaldehyde were studied. Eight physiological indexes of leaves including chlorophyll, free protein, relative conductivity, MDA (malondialdehyde, lipid peroxidation), SOD (superoxide dismutase), POD (peroxidase), T-AOC (total antioxidant capacity), and stomata were selected to monitor plants' recovery processes. The results of 30-day experimental runs showed that three species of spider plants were mostly recovered within 15 days. Repeated 7-day fumigation of plants, conducted to study their ability to effectively clean the air after regeneration, confirmed such ability; the efficiency at the first day was similar to the performance of the fresh plant. However, from the second day, the efficiency was dropped by 35-50% and remained at these levels for the rest of the exercise.

Biotechnology progress for removal of indoor gaseous formaldehyde

Formaldehyde is a ubiquitous carcinogenic indoor pollutant. The treatment of formaldehyde has attracted increasing social attention. Over the past few decades, an increasing number of publications have reported approaches for removing indoor formaldehyde. These potential strategies include physical adsorption, chemical catalysis, and biodegradation. Although physical adsorption is widely used, it does not really remove pollution. Chemical catalysis is very efficient but adds the risk of introducing secondary pollutants. Biological removal strategies have attracted more research attention than the first two methods, because it is more efficient, clean, and economical. Plants and bacteria are the common organisms used in formaldehyde removal. However, both have limitations and shortcomings when used alone. This review discusses the mechanisms, applications, and improvements of existing biological methods for the removal of indoor gaseous formaldehyde. A combination strategy relying on plants, bacteria, and physical adsorbents exhibits best ability to remove formaldehyde efficiently, economically, and safely. When this combination system is integrated with a heating, ventilation, air conditioning, and cooling (HVAC) system, a practical combined system can be established in formaldehyde removal. Multivariate interactions of biological and non-biological factors are needed for the future development of indoor formaldehyde removal. KEY POINTS: • Indoor gaseous formaldehyde removal is necessary especially for new residence. • Biological removal strategies have attracted increasing research attentions. • Combined system of plants, bacteria, and physical adsorbents exhibits best efficiency. • Integrated device of biological and non-biological factors will be potential practical.

Indoor formaldehyde removal by three species of Chlorphytum Comosum under the long-term dynamic fumigation system

Gaseous formaldehyde removal efficiency and physiological characteristics of leaves were investigated through a dynamic fumigation system. Three different species of potted Chlorophytum Comosum, (Green Chlorophytum Comosum for its green leaves), CC (Combined the leaves of Chlorophytum Comosum with leaves half green and half white) and PC (Purple Chlorophytum Comosum for its purple leaves), were exposed to formaldehyde for 7 days. The results showed formaldehyde removal efficiencies in the daytime were 71.07% ± 0.23, 84.66% ± 0.19, and 46.73% ± 0.15 at 1 ppm for GC, CC, and GC plants, respectively, and were 36.21% ± 0.24, 62.15% ± 0.19, and 34.97% ± 0.11 at night. This might be due to higher plant physiological activities (e.g., photosynthesis, respiration, and transpiration) during the daytime than at night. Ten physiological indicators of leaves were chosen to evaluate the 7-day fumigation process, which were chlorophyll, free protein, relative conductivity, malondialdehyde (MDA), hydrogen peroxide (H₂O₂), hydroxyl radical, superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and total antioxidant capacity (T-AOC). Eight of these indicators increased, while chlorophyll decreased by 22.16%, 6.95%, and 25.32%, and CAT decreased by 18.9%, 17.8%, and 25.30% for GC, CC, and PC respectively. Among all the increasing physiological indicators, relative conductivity and MDA showed the greatest increase by 279.32% and 155.56% for PC. A 15-day recovery study was also conducted using MDA and T-AOC as indicators. The results showed that all the tested plants could be tolerant up to the 8 ppm of formaldehyde concentration for 7 days under dynamic fumigation and needed 10-15 days for self-recovery.

An Industrial Scale Synthesis of Adipicdihydrazide (ADH)/Polyacrylate Hybrid with Excellent Formaldehyde Degradation Performance

A simple and versatile route for industrial scale synthesis of adipicdihydrazide (ADH)/polymer hybrids with excellent performance of formaldehyde degradation is proposed in this paper. The ADH compound is uniformly dispersed in poly(methyl methacrylate-butyl acrylate-methacrylic acid) (P(MMA-BA-MAA)) latex, which is validated by UV and dispersibility tests. The results illustrate that ADH has excellent compatibility and dispersion stability without affecting the film formation of the polymer latex. Furthermore, scanning electron microscope (SEM) and mapping analysis of the hybrid films also demonstrate that ADH is homogenously dispersed in the polymer matrix. Compared with neat polymers, the thermal properties of hybrid films are improved, for example, T_0.5 increases by 8.3 °C. According to qualitative tests of the 4-amino-3-hydrazino-5-mercapto-1,2,4-triazol-red/green/blue (AHMT-RGB) method, the hybrid films demonstrate high formaldehyde removal efficiency. On the basis of the semi-quantitative test of Fourier Transform infrared spectroscopy (FTIR) measurements, the rate of formaldehyde degradation can reach 1.034 × 10² mol/(h·m³) for the hybrid film with 5 wt% ADH.

Formaldehyde removal in the air by six plant systems with or without rhizosphere microorganisms

Uptake and in-plant transport of formaldehyde by six plants with or without soil microorganisms were investigated. The capabilities of fresh and boiled leaf extracts to dissipate added formaldehyde were also measured to evaluate formaldehyde metabolism in plant tissues. Results show that when the initial formaldehyde level in air was 0.56 ± 0.04 mg·m^-3, the removal rate in the plant-only systems varied from 1.91 to 31.8 μg·h^-1·g^-1 FW (fresh weight). The removal rate of plants in the plant-only systems were ordered as Helianthus annuus Linn > Lycopersicon esculentum Miller > Oryza sativa > Sansevieria trifasciata Prain > Bryophyllum pinnatum > Mesembryanthemum cordifolium L. f. Most reduction of formaldehyde in the air was due to degradation by active components in the plant tissues, of which 4-64% of these were through to be enzymatic reactions. In the microbe-plant systems, formaldehyde removal rates increased by 0.24-9.53 fold compared to the plant-only systems, with approximately 19.6-90.5% of the formaldehyde reduction resulting from microbial degradation. Microorganisms added to the rhizosphere solution enhanced phytoremediation by increasing the downward transport of formaldehyde and its release by roots. Results suggest a new means to screen for efficient plant species that can be used for phytoremediation of indoor air.

Phytoremediation of Formaldehyde from Indoor Environment by Ornamental Plants: An Approach to Promote Occupants Health

Background

Formaldehyde is a common hazardous indoor air pollutant which recently raised public concerns due to its well-known carcinogenic effects on human. The aim of this study was to investigate a potted plant-soil system ability in formaldehyde removal from a poor ventilated indoor air to promote dwellers health.

Methods

For this purpose, we used one of the common interior plants from the fern species (Nephrolepis obliterata), inside a Plexiglas chamber under controlled environment. Entire plant removal efficiency and potted soil/roots contribution were determined by continuously introducing different formaldehyde vapor concentrations to the chamber (0.6-11 mg/m³) each over a 48-h period. Sampling was conducted from inlet and outlet of the chamber every morning and evening over the study period, and the average of each stage was reported.

Results

The results showed that the N. obliterata plant efficiently removed formaldehyde from the polluted air by 90%-100%, depending on the inlet concentrations, in a long time exposure. The contribution of the soil and roots for formaldehyde elimination was 26%. Evaluation of the plant growing characteristics showed that the fumigation did not affect the chlorophyll content, carotenoid, and average height of the plant; however, a decrease in the plant water content was observed.

Conclusions

According to the results of this study, phytoremediation of volatile organic compound-contaminated indoor air by the ornamental potted plants is an effective method which can be economically applicable in buildings. The fern species tested here had high potential to improve interior environments where formaldehyde emission is a health concern.

Assessment of filtration efficiency and physiological responses of selected plant species to indoor air pollutants (toluene and 2-ethylhexanol) under chamber conditions

Three common plant species (Dieffenbachia maculata, Spathiphyllum wallisii, and Asparagus densiflorus) were tested against their capacity to remove the air pollutants toluene (20.0 mg m^-3) and 2-ethylhexanol (14.6 mg m^-3) under light or under dark in chamber experiments of 48-h duration. Results revealed only limited pollutant filtration capabilities and indicate that aerial plant parts of the tested species are only of limited value for indoor air quality improvement. The removal rate constant ranged for toluene from 3.4 to 5.7 L h^-1 m^-2 leaf area with no significant differences between plant species or light conditions (light/dark). The values for 2-ethylhexanol were somewhat lower, fluctuating around 2 L h^-1 m^-2 leaf area for all plant species tested, whereas differences between light and dark were observed for two of the three species. In addition to pollutant removal, CO₂ fixation/respiration and transpiration as well as quantum yield were evaluated. These physiological characteristics seem to have no major impact on the VOC removal rate constant. Exposure to toluene or 2-ethylhexanol revealed no or only minor effects on D. maculata and S. wallisii. In contrast, a decrease in quantum yield and CO₂ fixation was observed for A. densiflorus when exposed to 2-ethylhexanol or toluene under light, indicating phytotoxic effects in this species.

Phylloremediation of Air Pollutants: Exploiting the Potential of Plant Leaves and Leaf-Associated Microbes

Air pollution is air contaminated by anthropogenic or naturally occurring substances in high concentrations for a prolonged time, resulting in adverse effects on human comfort and health as well as on ecosystems. Major air pollutants include particulate matters (PMs), ground-level ozone (O3), sulfur dioxide (SO2), nitrogen dioxides (NO2), and volatile organic compounds (VOCs). During the last three decades, air has become increasingly polluted in countries like China and India due to rapid economic growth accompanied by increased energy consumption. Various policies, regulations, and technologies have been brought together for remediation of air pollution, but the air still remains polluted. In this review, we direct attention to bioremediation of air pollutants by exploiting the potentials of plant leaves and leaf-associated microbes. The aerial surfaces of plants, particularly leaves, are estimated to sum up to 4 × 108 km2 on the earth and are also home for up to 1026 bacterial cells. Plant leaves are able to adsorb or absorb air pollutants, and habituated microbes on leaf surface and in leaves (endophytes) are reported to be able to biodegrade or transform pollutants into less or nontoxic molecules, but their potentials for air remediation has been largely unexplored. With advances in omics technologies, molecular mechanisms underlying plant leaves and leaf associated microbes in reduction of air pollutants will be deeply examined, which will provide theoretical bases for developing leaf-based remediation technologies or phylloremediation for mitigating pollutants in the air.