Synthesis and photocatalytic application of oriented hierarchical ZnO flower-rod architectures

Nanocomposite Marvels: Unveiling Breakthroughs in Photocatalytic Water Splitting for Enhanced Hydrogen Evolution

An overview of the significant innovations in photocatalysts for H2 development, photocatalyst selection criteria, and photocatalytic modifications to improve the photocatalytic activity was examined in this Review, as well as mechanisms and thermodynamics. A variety of semiconductors have been examined in a structured fashion, such as TiO2-, g-C3N4-, graphene-, sulfide-, oxide-, nitride-, oxysulfide-, oxynitrides, and cocatalyst-based photocatalysts. The techniques for enhancing the compatibility of metals and nonmetals is discussed in order to boost photoactivity within visible light irradiation. In particular, further deliberation has been carried out on the development of heterojunctions, such as type I, type II, and type III, along with Z-systems, and S-scheme systems. It is important to thoroughly investigate these issues in the sense of visible light irradiations to enhance the efficacy of photocatalytic action. In fact, another advancement in this area may include hiring mediators including grapheme oxide and metals to establish indirect Z-scheme montages with a correct band adjustment. The potential consideration of reaction chemology, mass transfer, kinetics of reactions, restriction of light diffusion, and the process and selection of suitable light and photoreactor also will optimize sustainable hydrogen output efficiency and selectivity.

Crystal Engineering of BiVO4 for Photochemical Sensing of H2 S Gas at Ultra-low Concentration

We report a photochemical bismuth vanadate (BiVO4 ) sensing material, which possesses a large proportion of (110) and (011) facets combined with the additional (111) facets, for the selective detection of ultra-low concentration hydrogen sulfide (H2 S) driven by visible light. Specifically, the obtained octadecahedron BiVO4 (Octa-BiVO4 ) performs a high response value (67) and short response time (47.4 s) to 100 ppm H2 S with good stability for nearly 100 days, as well as undisturbedness by moist air. With the combination of experimental and theoretical calculation results, the adsorption and carrier transfer behaviors of H2 S molecules on the Octa-BiVO4 crystal surface are investigated. By adjusting the ratio of different crystal facets and controlling the facets with characteristic adsorption, we achieve improved anisotropic photoinduced carrier separation and high selectivity for a specific gas. Furthermore, this facial facet engineering can be extended to the synthesis of other sensing materials, offering huge opportunities for fundamental research and technological applications.

Comprehensive evaluation of photoelectrochemical performance dependence on geometric features of ZnO nanorod electrodes

The impact of geometric features, light absorption spectra, and electrochemical active surface area on photoelectrochemical properties was investigated in this work. Nanoforests of ZnO nanorods with rationally controlled morphologies were grown on ITO substrates by the hydrothermal method and utilized as a model for this purpose. The size of the nanorods was systematically adjusted by varying the concentration of polyethyleneimine as a cation surfactant in the growth solution. It was found that the emergent geometric characteristics (i.e. the aspect ratio) increased almost at the same pace as the electrochemically active surface area, but the light scattering effect slightly increased as a result of the random spatial orientation of the nanorods. The large surface area and the void space between nanorods increased the photon-to-current conversion efficiency by promoting the hole transfer process at the electrode/electrolyte interface. A maximum photocurrent density of 0.06 mA cm^-2 (0.5 V vs. NHE) for smaller diameter and length ZnO nanorods (ZnO-P1) was obtained under 365 nm UV light illumination. Additionally, we provide visual evidence that a shorter photogenerated hole diffusion distance results in improved charge separation efficiency using Mn²⁺ as the photogenerated hole imaging agent. Therefore, the present work demonstrates a facile strategy for nanoforest morphology improvement for generating strong contact at the ZnO NR electrode/electrolyte interface, which is favourable in energy conversion and storage technologies.

Fabrication of Robust and Stable N-Doped ZnO/Single-Walled Carbon Nanotubes: Characterization, Photocatalytic Application, Kinetics, Degradation Products, and Toxicity Analysis

The production of effective visible-light (VL) photocatalysts for the elimination of noxious organic pollutants from wastewater has attracted considerable interest owing to increasing awareness worldwide. Despite the large number of photocatalysts reported, the selectivity and activity of photocatalysts still need to be developed. The goal of this research is to eliminate toxic methylene blue (MB) dye from wastewater through a cost-effective photocatalytic process using VL illumination. A novel N-doped ZnO/carbon nanotube (NZO/CNT) nanocomposite was successfully synthesized via a facile cocrystallization method. The structural, morphological, and optical properties of the synthesized nanocomposite were systematically investigated. The as-prepared NZO/CNT composite exhibited remarkable photocatalytic performance (96.58%) within 25 min of VL irradiation. The activity was 92, 52, and 27% greater than that of photolysis, ZnO, and NZO, respectively, under identical conditions. The enhanced photocatalytic efficiency of NZO/CNT was attributed to the N atom and CNT involvement: N contributes to narrowing the band gap of ZnO, and CNT captures the electrons and maintains the electron flow in the system. The reaction kinetics of MB degradation, catalyst reusability, and stability were also investigated. In addition, the photodegradation products and their toxicity effects in our environment were analyzed using the liquid chromatography-mass spectrometry and ecological structure activity relationships programs, respectively. The findings of the current study demonstrate that the NZO/CNT nanocomposite can be utilized to remove contaminants in an environmentally acceptable manner, thereby providing a new window for practical applications.

Assessment of Performance of Photocatalytic Nanostructured Materials with Varied Morphology Based on Reaction Conditions

Synthesis of nanomaterials with specific morphology is an essential aspect for the optimisation of its properties and applications. The application of nanomaterials is being discussed in a wide range of areas, one of which is directly relevant to the environment through photocatalysis. To produce an effective photocatalyst for environmental applications, morphology plays an important role as it affects the surface area, interfaces, crystal facets and active sites, which ultimately affects efficiency. The method of synthesis and synthesis temperature can be the basic considerations for the evaluation of a particular nanomaterial. In this study, we have considered the aspects of morphology with a basic understanding and analyzed them in terms of nanomaterial efficacy in photocatalysis. Different morphologies of specific nanomaterials such as titanium dioxide, zinc oxide, silver phosphate, cadmium sulphide and zinc titanate have been discussed to come to reasonable conclusions. Morphologies such as nanorods, nanoflower, nanospindles, nanosheets, nanospheres and nanoparticles were compared within and outside the domain of given nanomaterials. The different synthesis strategies adopted for a specific morphology have been compared with the photocatalytic performance. It has been observed that nanomaterials with similar band gaps show different performances, which can be linked with the reaction conditions and their nanomorphology as well. Materials with similar morphological structures show different photocatalytic performances. TiO₂ nanorods appear to have the best features of efficient photocatalyst, while the nanoflowers show very low efficiency. For CdS, the nanoflower is the best morphology for photocatalysis. It appears that high surface area is the key apart from the morphology, which controls the efficiency. The overall understanding by analyzing all the available information has enumerated a path to select an effective photocatalyst amongst the several nanomaterials available. Such an analysis and comparison is unique and has provided a handle to select the effective morphology of nanomaterials for photocatalytic applications.

Fabrication of a Ternary Nanocomposite g-C3N4/Cu@CdS with Superior Charge Separation for Removal of Organic Pollutants and Bacterial Disinfection from Wastewater under Sunlight Illumination

The synthesis of a photo-catalyst with a narrow bandgap and efficient capability to degrade contaminants in the presence of sunlight is currently challenging but exciting. In this work, an efficient photocatalytic ternary nanocomposite g-C₃N₄/Cu@CdS has been synthesized successfully by using the co-precipitation method. The synthesized composite was then characterized by SEM, XRD studies, EDX analysis, and ultra-violet-visible (UV-VIS) spectroscopy. The catalytic efficiency for the methylene blue (MB) dye and drug degradation (ciprofloxacin) was assessed by UV-visible absorption spectra. Gram-positive and Gram-negative bacteria were used to test the fabrication composite's antibacterial properties. Various compositions (1%, 3%, 5%, 7%, and 9%) of/Cu@CdS nanocomposite (NCs) and 20%, 30%, 40%, 50%, and 60% of g-C₃N₄ NCs were prepared. Results reveal that 5%Cu@CdS and 40%g-C₃N₄5%Cu@CdS showed maximum antibacterial activity and photocatalytic degradation of dye and drug. The X-ray pattern showed no remarkable change in doped and pristine CdS nanoparticles (NPs). The efficient photocatalytic degradation activity of the fabricated ternary nanocomposite against MB dye and ciprofloxacin an antibiotic drug makes it a viable contender for solving environmental problems.

Addressable Label-Free Photoelectric Sensor Array with Self-Calibration for Detection of Neuron Specific Enolase

An addressable label-free photoelectric immunosensor array was designed for detection of neuron specific enolase (NSE) based on TiO₂/CdS as substrate materials. In this work, the hydrothermal synthesized TiO₂ nanorod film is evenly grown on the surface of the fluorine-doped tin oxide (FTO), and then CdS with a narrow band gap is added for sensitization through successive ionic layer adsorption reactions. The obtained TiO₂/CdS composite materials with matched energy band structures promote the rapid electron transfer and effectively reduce the recombination of electron hole pairs, which greatly enhance the visible light absorption and increased photocurrent intensity. In order to construct a suitable sensor array, the sensitized FTO electrode is divided into multiple regions of equal size by insulating stickers, and then the addressable and continuous detection of multiple samples can be achieved. Because multiple detection regions are prepared and tested under the same conditions, the difference effectively reduces, and the sensor can realize self-calibration and obtain more accurate results. Under optimal conditions, this sensor array can detect NSE in the linear range of 0.01-100 ng mL^-1 with a detection limit of 2.49 pg mL^-1 (S/N = 3). The sensor array has good selectivity, stability, and reproducibility, making it a viable approach for real sample detection.

Current advancements on the fabrication, modification, and industrial application of zinc oxide as photocatalyst in the removal of organic and inorganic contaminants in aquatic systems

Industrial wastewaters contain hazardous contaminants that pollute the environment and cause socioeconomic problems, thus demanding the employment of effective remediation procedures such as photocatalysis. Zinc oxide (ZnO) nanomaterials have emerged to be a promising photocatalyst for the removal of pollutants in wastewater owing to their excellent and attractive characteristics. The dynamic tunable features of ZnO allow a wide range of functionalization for enhanced photocatalytic efficiency. The current review summarizes the recent advances in the fabrication, modification, and industrial application of ZnO photocatalyst based on the analysis of the latest studies, including the following aspects: (1) overview on the properties, structures, and features of ZnO, (2) employment of dopants, heterojunction, and immobilization techniques for improved photodegradation performance, (3) applicability of suspended and immobilized photocatalytic systems, (4) application of ZnO hybrids for the removal of various types of hazardous pollutants from different wastewater sources in industries, and (5) potential of bio-inspired ZnO hybrid nanomaterials for photocatalytic applications using renewable and biodegradable resources for greener photocatalytic technologies. In addition, the knowledge gap in this field of work is also highlighted.

Regulation of the Volume Flow Rate of Aqueous Methyl Blue Solution and the Wettability of CuO/ZnO Nanorods to Improve the Photodegradation Performance of Related Microfluidic Reactors

Six CuO/ZnO nanorod (CuO/ZnONR)-based microfluidic reactors were constructed for different UV irradiation durations, with which an aqueous methylene blue (MB) solution was photodegraded at varied volume flow rate Q. Via numerical and experimental routes, the effects of the Q on the kinetic adsorption rate constant K_a and the initial rate constant K_A of the CuO/ZnONR-based microfluidic reactors were discussed. Moreover, a reverse contacting angle (CA) trend of CuO/ZnONRs to the reaction constant K curve of corresponding CuO/ZnONR-based microfluidic reactor suggested that the CA of CuO/ZnONRs was another key influencing factor that affected greatly the photodegradation performance of the microfluidic reactors. The Q of the aqueous MB solution and the UV irradiation duration for the photodeposition of CuO/ZnONRs were optimized to be 125 μL/min and 1.0 h, the K of the CuO/ZnONR-based microfluidic reactors reached 4.84 min^-1, and the related ΔK_A/K was less than 6%. Similarly, these methods and results can be employed not only to enhance the mass transport and adsorption of specific species within other nanostructured matrix material-coated microchannels but also to enlarge the actual contacting surface areas between these microchannels and the related solution, which further improve the performance of other nanostructured catalyst-based microfluidic reactors, rGO microfluidic voltage generation, and a GOx/AuNW enzymatic glucose microfluidic sensor.

Vitex negundo assisted green synthesis of metallic nanoparticles with different applications: a mini review

Background

Several attempts have been made for green synthesis of nanoparticles of different metals and metal oxides, revealing the significance of plant extracts in reducing metal source to nanoparticles and applications in various scientific domains.

Main body

The present article focus on applications of Vitex negundo leaves extract in fabrication of nanoparticles of various metals like silver, gold, zinc oxide, and copper oxide. Vitex negundo is evergreen, perennial shrub, belonging to family Verbenaceae. Its leaves are reported to contain several phytochemicals like iridoids, flavonoids, and their glycosides, terpenoids. In respective research attempts, these metallic nanoparticles were evaluated for one or more applications like anti-microbial activity and/or photocatalytic activity.

Conclusions

Use of V. negundo polar extract indicated involvement of its polar phytocompounds in reducing the metal source and stabilizing the nanoparticles. In conclusion, it could be noted that metal nanoparticles have better antimicrobial activity and photocatalytic potential over aqueous leaves extract.

Thermal Annealing Induced Controllable Porosity and Photoactive Performance of 2D ZnO Sheets

Porous ZnO sheets containing various degrees of a nanoscaled pore were successfully synthesized using a simple hydrothermal method and various postannealing procedures. The porosity features of the ZnO sheets can be easily tuned by changing both the annealing temperature and annealing atmosphere. The dense porous nature of ZnO sheets is beneficial to enhance light absorption. Moreover, the substantially increased oxygen vacancies in the ZnO sheets were observed especially after the hydrogen treatment as revealed in the X-ray photoelectron spectroscope and photoluminescence analyses. The high density of surface crystal defect enhanced the photoinduced electron-hole separation rate of the ZnO sheets, which is crucial for an improved photoactivity. The porous ZnO sheets formed at a hydrogen atmosphere exhibited superior photoactive performance than the porous ZnO sheets formed at the high-temperature ambient air annealing. The dense pores and massive crystal defects formed by a hydrogen atmosphere annealing in the ZnO crystals might account for the observed photoactive behaviors in this study.

ZnO/Carbon xerogel photocatalysts by low-pressure plasma treatment, the role of the carbon substrate and its plasma functionalization

ZnO is known to be photocatalytic, but with limited performances due to the strong electron-hole recombination after irradiation. The integration of ZnO nanomaterials on a conductive and high surface area carbon substrate is thus a potential alternative to obtain a significant improvement of the photocatalytic performance. Moreover, the carbon functionalization is expected to have a significant role in the adsorption/degradation mechanisms of dye, due to the difference in wettability or surface charge. In this view, ZnO photocatalytic nanoparticles have been deposited on high surface area carbon xerogel substrate (C_XG), using a new and original plasma process, consisting in the degradation of a solid organometallic directly on the carbon substrate (no gaseous precursor). In addition to the ZnO nanoparticle formation, the plasma treatment allows the carbon functionalization. The ZnO/C_XG composite has been tested for the degradation of Rhodamine B (RhB) in aqueous media and compared with and O₂ or NH₃ plasma-treated xerogels (without nanoparticles) to identify the significant role of the substrate and its modification in the RhB adsorption and degradation mechanism. The high photocatalytic activity of ZnO/C_XG composite is attributed to (i) the formation of small (8-10 nm) and well-crystallized ZnO nanoparticles anchored to the carbon substrate and (ii) to the modification of the xerogel surface chemistry. Indeed, O₂ plasma treatment of the C_XG promotes the generation of hydroxyl, carbonyl and carboxyl surface functional groups, which are polar and acidic, while the NH₃ plasma treatment mainly leads to the formation of polar and basic amino groups. While both plasma treatments promote the formation of polar functional groups, which enhance the C_XG wettability, the formation of acidic groups is identified as beneficial for the adsorption of the RhB dye, while basic groups are detrimental.

Investigation of Strain Effects on Photoelectrochemical Performance of Flexible ZnO Electrodes

In this report, the growth of zinc oxide (ZnO) nanocrystals with various morphologies, nanoflower, nanosheet, and nanorod, on flexible stainless steel (SS) foils to be utilized as photoanodes in photoelectrochemical (PEC) solar cells has been presented. It has been aimed to provide flexibility and adaptability for the next generation systems with the incorporation of SS foils as electrode into PEC cells. Therefore, physical deformation tests have been applied to the prepared ZnO thin film photoanodes. These thin films have been thoroughly characterized before and after straining for better understanding the relationship between the morphology, straining effect and photoelectrochemical efficiency. We observed a notable increase in the maximum incident photon-to-current efficiency (IPCE) and durability of all ZnO photoelectrodes after straining process. The increase in IPCE values by 1.5 and 2.5 folds at 370 nm has been observed for nanoflower and nanorod morphologies, respectively after being strained. The maximum IPCE of 69% has been calculated for the ZnO nanorod structures after straining. Bending of the SS electrodes resulted in the more oriented nanorod arrays compared to its flat counterpart, which improved both the light absorption and also the photo-conversion efficiency drastically. The finite-difference time-domain simulations have also been carried out to examine the optical properties of flat and bent ZnO electrodes. Finally, it has been concluded that SS photoanodes bearing ZnO semiconducting material with nanoflower and nanorod morphologies are very promising candidates for the solar hydrogen generator systems in terms of efficiency, durability, flexibility, and lightness in weight.

Investigations on Photocatalytic, Antimicrobial and Magnetic Properties of Sol–Gel-Synthesized Ga-Doped ZnO Nanoparticles

Gallium (Ga)-doped zinc oxide (ZnO) nanoparticles were synthesized using simple and cost-effective sol–gel method. X-ray powder diffraction studies illustrated the crystalline nature of Ga-doped ZnO nanoparticles with hexagonal wurtzite structure. Fourier-transform infrared spectroscopy and energy dispersive X-ray fluorescence confirmed the Ga[Formula: see text] incorporation in ZnO. The photocatalytic activities of all the synthesized samples were performed on methylene blue dye solution exposed under UV light. The antibacterial activities of the synthesized nanoparticles were investigated against Aeromonas liquefaciens and Shigella flexeneri gram-negative pathogenic strains. The experimental results clearly demonstrated significant enhancement in photocatalytic and antimicrobial activity of ZnO nanoparticles doped with optimum concentration of Ga. Room temperature vibrating sample magnetometer measurements illustrated weak ferromagnetism in all the Ga-doped ZnO samples.

Synthesis of N-doped ZnO nanoparticles with cabbage morphology as a catalyst for the efficient photocatalytic degradation of methylene blue under UV and visible light

In this study, the synthesis of nitrogen-doped zinc oxide nanoparticles with a cabbage like morphology (N-ZnONCBs) by a hydrothermal method using zinc acetate dihydrate as a precursor and hydrazine monohydrate as a nitrogen source is reported. N-ZnONCB were characterized using UV-visible Spectroscopy (UV-Vis), Fluorescence Spectroscopy, Fourier Transmittance Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), Raman Spectroscopy, Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Electron Dispersive Spectroscopy (EDS) and EDX elemental mapping. N-ZnONCBs were tested for their photocatalytic capabilities in the degradation of methylene blue (MB) under UV-light and visible light irradiation for about 0 to 80 minutes and 0 to 50 min respectively. The N-ZnONCB catalyst demonstrated improved photodegradation efficiency (98.6% and 96.2%) and kinetic degradation rates of MB (k = −0.0579 min⁻¹ and k = −0.0585 min⁻¹) under UV light and visible light irradiation at different time intervals. The photodegradation study was also evaluated with different dosages of N-ZnONCB catalyst, different initial concentrations of MB and variation in the pH (3, 5, 9 and 11) of the solution of MB under UV light and visible light irradiation. The photocatalytic degradation intermediate products were obtained by liquid chromatography mass spectra (LC-MS) and also complete mineralization was determined by using Total Organic Carbon (TOC) studies. This photocatalyst was also tested with 2,4-dichlorophenol (2,4-DCP) under visible light irradiation at different time intervals. Fluorescence and quenching studies were performed for the binding interaction between the N-ZnONCB catalyst and MB dye. A Zetasizer was used to find the charge and average size of the N-ZnONCB catalyst and also the charge of the N-ZnONCB catalyst before and after MB dye solution adsorption. The N-ZnONCB catalyst was also tested for its photostability and reusability with a percentage degradation rate of MB (93.2%) after 4 cycle experiments. These results have clearly demonstrated that the N-ZnONCB catalyst can be applied for the photocatalytic degradation of MB from wastewater samples.

In this study, the synthesis of nitrogen-doped zinc oxide nanoparticles with a cabbage like morphology (N-ZnONCBs) by a hydrothermal method using zinc acetate dihydrate as a precursor and hydrazine monohydrate as a nitrogen source is reported.

ZnO flower-rod/g-C3N4-gold nanoparticle-based photoelectrochemical aptasensor for detection of carcinoembryonic antigen

A highly sensitive and selective photoelectrochemical (PEC) aptasensor was constructed for carcinoembryonic antigen (CEA) detection based on ZnO flower-rods (ZnO FRs) modified with g-C₃N₄-Au nanoparticle (AuNP) nanohybrids. The nanohybrids of g-C₃N₄-AuNPs can improve the visible light absorbance of ZnO FRs and enhance the PEC property. We designed a sandwichlike structure formed with DNA hybridization of NH₂-probe1, CEA aptamer, and CuS-NH₂-probe2 to detect CEA. The p-type semiconductor CuS nanocrystals (NCs) at the terminational part of sandwichlike structure work as electron traps to capture photogenerated electrons and consequently lead to a magnified photocurrent change. The results indicate that the photocurrent is increased when CEA antigen (Ag) is introduced. Since the sandwichlike structure is destroyed, CuS NCs are restricted to capture photogenerated electron. The PEC aptasensor for CEA determination is ranged from 0.01 ng·mL^-1 to 2.5 ng·mL^-1 with a detection of 1.9 pg·mL^-1. The proposed aptasensor exhibits satisfactory PEC performances with rapid detection, great sensitivity and specificity. Specially, this PEC aptasensor shows a reliable result for the determination of CEA in invalid human serum compared with the ELISA method. The designed aptasensor may provide a new idea for a versatile PEC platform to determine various molecules. Graphical abstract ᅟ.

Construction of a solar spectrum active SnS/ZnO p–n heterojunction as a highly efficient photocatalyst: the effect of the sensitization process on its performance

Comparison of photocatalytic activity of ex situ and in situ sensitized 1D SnS/ZnO in the photodegradation of multiple organic dyes under sunlight.

Hierarchical photocatalysts

The design, fabrication, performance and applications of hierarchical semiconductor photocatalysts are thoroughly reviewed and apprised.

Preparation of Self-Assembled Spherical g-C3N4/tz-Bi(0.92)Gd(0.08)VO4 Heterojunctions and Their Mineralization Properties

A novel kind of spherical g-C3N4/tz-Bi0.92Gd0.08VO4 heterojuctions are prepared via a simple microwave hydrothermal method. The sphere self-assembled mechanism and the heterojunction photocatalytic mechanism are mainly studied in this article. The results show that the added g-C3N4 sheets first anchor on ms-BiVO4 surfaces and then polymerize to form the coating layers, generating steric effect which is competing with Gd(3+) induction effect to affect the crystal transformation (from ms-BiVO4 to tz-BiVO4) and its growth during those processes. Afterward, independent coated structures are further polymerized and assembled into g-C3N4/tz-Bi0.92Gd0.08VO4 spheres. Because ECB (-0.95 V) of g-C3N4 is more negative than ECB (-0.05 V) of tz-BiVO4, the photoelectrons of g-C3N4 can be transferred into tz-BiVO4 surfaces through the heterojunction structure, so as to promote the separation rate of electron-hole pairs. In general, the adding of g-C3N4 can introduce hydroxyl groups to catch the photoholes and can inject electrons to react with dissolved oxygen to boost the production of active groups. Depending on such an orderly cooperation, g-C3N4/tz-Bi0.92Gd0.08VO4 heterojunction catalysts exhibit high and stable mineralization properties.

Studies on visible light photocatalytic and antibacterial activities of nanostructured cobalt doped ZnO thin films prepared by sol-gel spin coating method

Nanostructured cobalt doped ZnO thin films were deposited on glass substrate by sol-gel spin coating technique and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy and UV-Vis spectroscopy. The XRD results showed that the thin films were well crystalline with hexagonal wurtzite structure. The results of EDAX and XPS revealed that Co was doped into ZnO structure. FESEM images revealed that the films possess granular morphology without any crack and confirm that Co doping decreases the grain size. UV-Vis transmission spectra show that the substitution of Co in ZnO leads to band gap narrowing. The Co doped ZnO films were found to exhibit improved photocatalytic activity for the degradation of methylene blue dye under visible light in comparison with the undoped ZnO film. The decrease in grain size and extending light absorption towards the visible region by Co doping in ZnO film contribute equally to the improved photocatalytic activity. The bactericidal efficiency of Co doped ZnO films were investigated against a Gram negative (Escherichia coli) and a Gram positive (Staphylococcus aureus) bacteria. The optical density (OD) measurement showed better bactericidal activity at higher level of Co doping in ZnO.

Simple Growth of Faceted Au-ZnO Hetero-nanostructures on Silicon Substrates (Nanowires and Triangular Nanoflakes): A Shape and Defect Driven Enhanced Photocatalytic Performance under Visible Light

A simple single-step chemical vapor deposition (CVD) method has been used to grow the faceted Au-ZnO hetero-nanostructures (HNs) either with nanowires (NWs) or with triangular nanoflakes (TNFs) on crystalline silicon wafers with varying oxygen defect density in ZnO nanostructures. This work reports on the use of these nanostructures on substrates for photodegradation of rhodamine B (RhB) dyes and phenol under the visible light illumination. The photoluminescence measurements showed a substantial enhancement in the ratio of defect emission to band-edge emission for TNF (ratio ≈ 7) compared to NW structures (ratio ≤ 0.4), attributed to the presence of more oxygen defects in TNF sample. The TNF structures showed 1 order of magnitude enhancement in photocurrent density and an order of magnitude less charge-transfer resistance (R(ct)) compared to NWs resulting high-performance photocatalytic activity. The TNFs show enhanced photocatalytic performance compared to NWs. The observed rate constant for RhB degradation with TNF samples is 0.0305 min(-1), which is ≈5.3 times higher compared to NWs case with 0.0058 min(-1). A comparison has been made with bulk ZnO powders and ZnO nanostructures without Au to deduce the effect of plasmonic nanoparticles (Au) and the shape of ZnO in photocatalytic performance. The results reveal the enhanced photocatalytic capability for the triangular nanoflakes of ZnO toward RhB degradation with good reusability that can be attracted for practical applications.

The effect of operational parameters on the photocatalytic degradation of Congo red organic dye using ZnO-CdS core-shell nano-structure coated on glass by Doctor Blade method

Photocatalytic degradation of Congo red was investigated using ZnO-CdS core-shell nano-structure coated on glass by Doctor Blade method in aqueous solution under irradiation. Field-emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) techniques were used for the morphological and structural characterization of ZnO-CdS core-shell nanostructures. XRD results showed diffractions of wurtzite zinc oxide core and wurtzite cadmium sulfide shell. FESEM results showed that nanoparticles are nearly hexagonal with an average diameter of about 50 nm. The effect of catalyst loading, UV-light irradiation time and solution pH on photocatalytic degradation of Congo red was studied and optimized values were obtained. Results showed that the employment of efficient photocatalyst and selection of optimal operational parameters may lead to complete decolorization of dye solutions. It was found that ZnO-CdS core-shell nano-structure is more favorable for the degradation of Congo red compare to pure ZnO or pure CdS due to lower electron hole recombination. The results showed that the photocatalytic degradation rate of Congo red is enhanced with increasing the content of ZnO up to ZnO(0.2 M)/CdS(0.075 M) which is reached 88.0% within 100 min irradiation.

Spontaneous hyper-branching in ZnO nanostructures: morphology dependent electron emission and light detection

The structure and intrinsic defect-induced electron field emission and photodetection are monitored in ZnO nanoforms with assorted morphology prepared in ambient conditions via a facile wet chemical approach.

Sulfonated graphene oxide-ZnO-Ag photocatalyst for fast photodegradation and disinfection under visible light

Synthesis of efficient visible-light-driven photocatalyst is urgent but challenging for environmental remediation. In this work, for the first time, the hierarchical plasmonic sulfonated graphene oxide-ZnO-Ag (SGO-ZnO-Ag) composites were prepared through nanocrystal-seed-directed hydrothermal method combining with polyol-reduction process. The results indicated that SGO-ZnO-Ag exhibited much faster rate in photodegradation of Rhodamine B (RhB) and disinfection of Escherichia coli (E. coli), than ZnO, SGO-ZnO and ZnO-Ag. SGO-ZnO-Ag totally degraded RhB dye and kill 99% of E. coli within 20 min under visible light irradiation. The outstanding performances of SGO-ZnO-Ag were attributed to the synergetic merits of SGO sheets, ZnO nanorod arrays and Ag nanoparticles. Firstly, the light absorption ability of SGO-ZnO-Ag composite in the visible region was enhanced due to the surface plasmon resonance of Ag. In addition, the hierarchical structure of SGO-ZnO-Ag composite improved the incident light scattering and reflection. Furthermore, SGO sheets facilitated charge transfer and reduce electron-hole recombination rate. Finally, the tentative mechanism was proposed and verified by the photoluminescence (PL) measurement as well as the theoretical finite-difference time-domain (FDTD) simulation. In view of above, this work paves the way for preparation of multi-component plasmonic composites and highlights the potential applications of SGO-ZnO-Ag in photocatalytic wastewater treatment field.

Graphene oxide-CdS composite with high photocatalytic degradation and disinfection activities under visible light irradiation

Graphene oxide (GO)-CdS composites were synthesized via a novel two-phase mixing method successfully. CdS nanoparticles were uniformly self-assembled on GO sheets at water/toluene interface. The photocatalytic degradation (photodegradation) and disinfection activities of GO-CdS composites were investigated thoroughly. The results show that GO-CdS composites exhibit higher efficiency in photodegradation of various water pollutants than pure CdS nanoparticles under visible light irradiation. In addition, the interactions between GO sheets and CdS nanoparticles inhibit the photo-corrosion of CdS and leaching of Cd(2+). Only 3.5 wt% Cd(2+) of GO-CdS was leached out after photodegradation, while 38.6 wt% Cd(2+) of CdS was lost into aqueous solution. Furthermore, the disinfection activity of GO-CdS composites was investigated for the first time. Nearly 100% of both Gram-negative Escherichia coli (E. coli) and Gram-positive Bacillus subtilis (B. subtilis) were killed within 25 min under visible light irradiation. The excellent performances of GO-CdS composites can be attributed to that (1) effective charge transfer from CdS to GO reduces the recombination rate of photo-generated electron-hole pairs; (2) uniform deposition of CdS on GO sheets eliminates aggregation of CdS nanoparticles; and (3) the strong interactions between GO and CdS enhancing the durability of GO-CdS composites. Finally, the mechanism behind these excellent performances was verified by transient photocurrent measurement and further confirmed by ESR technique as well as employing a radical scavenging species - dimethyl sulfoxide (DMSO).

Synthesis of hierarchically structured ZnO spheres by facile methods and their photocatalytic deNOx properties

This paper presents novel and facile methods for the fabrication of a series ZnO spheres by template-free, carbon template and hydrated-salt assisted solvothermal process, respectively. Phase purity and crystalline structure of the products were studied by X-ray diffraction analysis. SEM was employed to investigate the morphology and the fabrication of the monodisperse. BET analysis revealed that the as-prepared samples possessed huge specific surface area. UV-vis diffuse reflectance spectroscopy showed that these ZnO hollow spheres have a higher absorption. The as-prepared samples showed excellent photocatalytic activity for the decomposition of NOx gas under both visible-light and UV light irradiation (λ>510, 400, 290nm), being superior to that of commercial TiO2 powders.