Enhanced adsorption and photocatalytic activity of BiOI-MWCNT composites towards organic pollutants in aqueous solution

Biofunctional photoelectrochemical/electrochemical immunosensor based on BiVO4/BiOI-MWCNTs and Au@PdPt for alpha-fetoprotein detection

A biofunctional immunosensor combining photoelectrochemical (PEC) and electrochemical (EC) was proposed for the quantitative detection of the liver cancer marker alpha-fetoprotein (AFP) in human blood. BiVO4/BiOI-MWCNTs photoactive materials were first prepared on conductive glass FTO, and the photoelectrode was functionalized by chitosan and glutaraldehyde. Then, the AFP capture antibody (Ab1) was successfully modified on the photoelectrode, and the label-free rapid detection of AFP antigen was achieved by PEC. In addition, Au@PdPt nanospheres were also used as a marker for binding to AFP detection antibody (Ab2). Due to the excellent catalytic properties of Au@PdPt in EC reaction, a signal increase in the EC response can be achieved when Ab2 binds to the AFP antigen, which ensures high sensitivity for the detection of AFP. The detection limits of PEC and EC are 0.050 pg/mL and 0.014 pg/mL, respectively. The sensor also possesses good specificity, stability and reproducibility, shows excellent performance in the detection of clinical samples and has good clinical applicability.

Fabrication of porous and defect-rich BiOI/MWCNTs photocatalyst by Ar plasma-etching for emerging pollutants degradation

Carbon material modification and defect engineering are indispensable for bolstering the photocatalytic effectiveness of bismuth halide oxide (BiOX). In this study, a novel porous and defect-rich Ar-CB-2 photocatalyst was synthesized for emerging pollutants degradation. Leveraging the interfacial coupling effect of multi-walled carbon nanotubes (MWCNTs), we expanded the absorption spectrum of BiOI nanosheets and significantly suppressed the recombination of charge carriers. Introducing defects via Argon (Ar) plasma-etching further bolstered the adsorption efficacy and electron transfer properties of photocatalyst. In comparison to the pristine BiOI and CB-2, the Ar-CB-2 photocatalyst demonstrated superior photodegradation efficiency, with the first-order reaction rates for the photodegradation of tetracycline (TC) and bisphenol A (BPA) increasing by 2.83 and 4.53 times, respectively. Further probe experiments revealed that the steady-state concentrations of ·O2- and 1O2 in the Ar-CB-2/light system were enhanced by a factor of 1.67 and 1.28 compared to CB-2/light system. This result confirmed that the porous and defect-rich structure of Ar-CB-2 inhibited electron-hole recombination and boosted photocatalyst-oxygen interaction, swiftly transforming O2 into active oxygen species, thus accelerating their production. Furthermore, the possible degradation pathways for TC and BPA in the Ar-CB-2/light system were predicted. Overall, these findings offered a groundbreaking approach to the development of highly effective photocatalysts, capable of swiftly breaking down emerging pollutants.

Prism-like integrated Bi2WO6 with Ag-CuBi2O4 on carbon nanotubes (CNTs) as an efficient and robust S-scheme interfacial charge transfer photocatalyst for the removal of organic pollutants from wastewater

Photocatalytic hybrid carbon nanotubes (CNTs)-mediated Ag-CuBi2O4/Bi2WO6 photocatalyst was fabricated using a hydrothermal technique to effectively eliminate organic pollutants from wastewater. The as-prepared samples were characterized via Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction patterns (XRD), high-resolution transmission electron microscope (HR-TEM), UV-vis Diffuse Reflectance spectrum (UV-Vis DRS), and photoluminescence (PL) studies. The photocatalytic performance of fabricated pristine and hybrid composites was examined by photo-degradation of toxic dye viz. Rhodamine B (RhB) under visible light. Photo-degradation results revealed that the fabricated Ag-CuBi2O4/CNTs/Bi2WO6 semiconductor photocatalyst followed pseudo-first-order kinetics and displayed a higher photocatalytic rate, which was found to be approximately 3.33 and 2.35 times higher than the pristine CuBi2O4 and Bi2WO6 semiconductor photocatalyst, respectively. Re-cyclic results demonstrated that the formed composite owns excellent stability, even after five consecutive cycles. As per the matched Fermi level of CNTs in between Ag-CuBi2O4 and Bi2WO6, carbon nanotubes severed as electron transfer-bridge, Ag doping on CuBi2O4 surface successfully increased photon absorption all across CuBi2O4 surface. Also, it hindered the assimilation of photoinduced electron-hole pairs. The increased photocatalytic efficiency is contributed to the uniform dispersion of photo-generated electron-hole pairs via the construction of an S-scheme system. ROS trapping and ESR experiments suggested that (∙OH) and (O2-∙) were the main radical species for enhanced photo-degradation of RhB dye. The current investigation, from our perspective, highlights the new insights for the fabrication of practical CNTs-mediated S-scheme-based semiconductor photocatalyst for the resolution of environmental issues based on practical considerations.

Novel fabrication of the recyclable Bi7O9I3/chitosan and BiOI/chitosan heterostructure with improved photocatalytic activity for degradation of dimethyl phthalate under visible light

Among the bismuth oxyhalides, bismuth oxide has the shortest band gap and high absorption power in the visible light region. Dimethyl phthalate (DMP) has been identified as endocrine-disrupting plasticizer and emerging pollutant, which was selected as the target pollutant to evaluate the efficacy of the studied catalytic process. In this work, Bi₇O₉I₃/chitosan and BiOI/chitosan were efficaciously synthesized by the hydrothermal process method. Characterizing prepared photocatalysts was done by employing transmission electron microscopy, X-ray diffraction, scanning electron microscopy energy-dispersive spectroscopy, and diffuse reflectance spectroscopy. For this study, the test design was performed using the Box-Behnken Design (BBD) method in which the variables of pH, Bi₇O₉I₃/chitosan dose, and dimethyl phthalate concentration were examined for the catalytic removal of dimethyl phthalate in the presence of visible light. Our detected results disclosed that the order of efficiency in DMP removal was as follows: Bi₇O₉I₃/chitosan > BiOI/chitosan > Bi₇O₉I₃ > BiOI. Also, the maximum pseudo-first-order kinetic coefficient for Bi₇O₉I₃/chitosan was 0.021 (min)^-1. When the synthesized catalysts were exposed to visible light irradiation, the predominant active species were O₂^- and h⁺ for degradation of DMP. The study on the reuse of Bi₇O₉I₃/chitosan showed that this catalyst could be reused 5 times without significant reduction in efficiency, which indicates the cost-effectiveness and environmental friendliness of using this catalyst.

Synthesis of adjustable {312}/{004} facet heterojunction MWCNTs/Bi5O7I photocatalyst for ofloxacin degradation: Novel insights into the charge carriers transport

Multi-wall carbon nanotubes (MWCNTs) with high electrical conductivity are commonly accounted as the ideal additives to enhance the charge surface migration efficiency in photocatalysis. Theoretically, the MWCNTs-modified binary photocatalysts have potential for the change of nanocrystal structure. Herein, we reports an adjustable {312}/{004}facet heterojunction MWCNTs/Bi₅O₇I nanocomposite. Interestingly, the synergistic effect of {312}/{004}facet heterojunction and MWCNTs can effectively accelerate the spatial charge carriers transport. A novel {312}/{004}facet "S-scheme" pathway was proven to be the dominated pathway for the enhancement of spatial charge carriers. As a result, the MWCNTs-{312}/{004}Bi₅O₇I composites exhibited superior photocatalytic oxidation efficiency for a representative antibiotics ofloxacin photodegradation. Density functional theory (DFT) calculation and LC-MS/MS analysis confirmed that the possible dealkylation and oxidation pathways could be found in OFL degradation. This work provides novel insights for the relationship between charge carrier transport and facet structure-property.

A review on bismuth oxyhalide based materials for photocatalysis

Photocatalytic solar energy transformation is the most encouraging solution to alleviate the environmental crisis and energy scarcity. Bismuth oxyhalide (BiOX) is an emerging class of materials that exhibits photocatalytic properties, such as resilient response to light, which causes enhanced energy conversion (solar energy) owing to their exceptional layered structure and attractive band structure. The present review presents a summary of results from the recent developments on the tuning and design of BiOX-based materials to improve the energy conversion. In particular, the preparation and tuning approaches that have the potential to enhance the photocatalytic behavior of BiOX and some other techniques, such as elemental doping, are addressed, which prevent the rapid recombination of charges, and formation of oxygen vacancies, facilitating an improvement in the photocatalytic reaction. Various frameworks are also presented, displaying the significance of BiOX-based nanocomposites. Finally, the main challenges and opportunities associated with the future progress of BiOX-based materials are presented. This review will provide an extended understanding and offer a preferred direction for the innovative design of BiOX-based materials for environmental and especially energy-based applications.

Oxygen-rich bismuth oxybromide nanosheets coupled with Ag2O as Z-scheme nano-heterostructured plasmonic photocatalyst: Solar light-activated photodegradation of dye pollutants

In this research to enhance the photocatalytic activity of Bi₂₄O₃₁Br₁₀, precipitation fabrication of the Z-scheme heterojunction with Ag-Ag₂O has been investigated. The characterizations were carried out by XRD, FESEM, TEM, EDX, BET-BJH, DRS and pH_pzc analyzes. The Ag-Ag₂O/Bi₂₄O₃₁Br₁₀ Z-scheme heterojunction nanophotocatalyst with weighted ratio of 3:1 exhibited the wide absorption in the visible light region and displayed the high photocatalytic activity for the photodegradation of acid orange 7 (96.5%, 94.1% and 90% for 10, 20 and 60 mg/L, respectively after 120 min) and eosin yellow (for 10 mg/L: 81.5%) compared to the other composites and pure Bi₂₄O₃₁Br₁₀ and Ag-Ag₂O samples. The highly enhanced photocatalytic activity of Ag-Ag₂O/Bi₂₄O₃₁Br₁₀ (3:1) was assigned to the surface plasmon resonance effect of silver nanoparticles, high solar-light-response and the structure of Z-scheme heterojunction, which effectively reduces the recombination of the photogenerated charge carriers. Moreover Ag-Ag₂O/Bi₂₄O₃₁Br₁₀(3:1) Z-scheme heterojunction nanophotocatalyst exhibited the good photocatalytic activity even after 4 runs.

Mechanistic insight of structural and optical properties of BiOCl in the presence of CNTs and investigating photodegradation of phenol by BiOCl/CNT composites

In this work, we have synthesized composites of BiOCl with carbon nanotubes (CNTs) via a hydrothermal method. Different compositions of CNTs were used to study their influence on the physicochemical properties of BiOCl. Based on the interesting results obtained, various significant correlations were made. This study explored how use of CNTs and different hydrothermal crystallization conditions can influence the photocatalytic activity of composites. The CNTs have an impact on the primary crystallite size and morphology of BiOCl. Also, a higher degree of crystallization was obtained in the case of samples containing CNTs. However, in some cases, the synthesis parameters such as high temperature and longer duration also promoted crystallinity in BiOCl/CNT samples. Further, the samples were investigated for their photocatalytic activity to study the photodegradation of RhB and phenol, as model pollutants, under visible and UV light, respectively. The maximum degradation efficiency of 83% for RhB under visible light and almost 40% for phenol under UV light was obtained using BiOCl/CNT composites. Surprisingly, pure BiOCl showed higher performance for the removal of both the pollutants. This is why some comparisons and correlations between the structural and optical properties of BiOCl and CNTs were made. Finally, this study illustrates how a nanostructure like conductive multiwalled carbon nanotubes can sometimes have detrimental effects on the overall photocatalytic properties of a photocatalyst like BiOCl under certain conditions. Therefore, understanding the synergy between physico-chemical properties of BiOCl and nanostructured-modifiers like CNTs could help in designing a photocatalyst system which could benefit wastewater treatment.

In this work, we have synthesized composites of BiOCl with carbon nanotubes (CNTs) via a hydrothermal method.

Heterostructured Bi2O2CO3/rGO/PDA photocatalysts with superior activity for organic pollutant degradation: Structural characterization, reaction mechanism and economic assessment

Compared with conventional methods for organic pollutant degradation, photocatalysis is a promising treatment technology with broad application prospects. Bi₂O₂CO₃ is often used for organic pollutants degradation but greatly restricted by having drawbacks of large band gap and high electron-hole recombination rate. Herein, heterostructured Bi₂O₂CO₃ (BOC)/reduced graphene oxide (rGO)/polydopamine (PDA) (BGP) photocatalysts were first designed through a green chemical method. By incorporating rGO and PDA in BOC, the kinetic constant of BGP to catalytically degrade methyl orange (MO) was significantly increased; over fourfold elevated rather than that of BOC (k_app/BOC = 0.0019, k_app/BGP = 0.0089) due to the high electron transfer capability of rGO and superior adhesive force and semiconducting properties of PDA. DRS and photoelectrochemical results confirmed the improvement of the light absorption range and charge transfer capability because of the synergistic effect of rGO and PDA. Results of trapping experiment and ESR unraveled the catalytic mechanism that both holes (h⁺) and superoxide radicals (•O₂^-) were the main oxidative species for MO degradation. Economic assessment results demonstrated that Bi₂O₂CO₃/rGO/PDA heterojunctions have great potentials in the field of organic wastewater purification. This study developed a low-cost and highly efficient BGP material and provided a deep understanding of the structure-performance relationships of materials for organic pollutant degradation.

Intensification of Dihydroxybenzenes Degradation over Immobilized TiO2 Based Photocatalysts under Simulated Solar Light

The work is focused on the assessment of possible methods for intensification of photocatalytic degradation of common water borne pollutants. Solar photocatalysis poses certain limitations for large scale application with several possible reactor designs which have shown an optimal performance. In the current study, a comparison between two types of pilot scale reactors was made: a flat-plate cascade reactor (FPCR) and tubular reactor with a compound parabolic collector (CPC). Apart from the reactor design, another aspect of possible intensification was a photocatalyst formulation. The efficiency of photocatalytic films that consisted of pure TiO2 nanoparticles was compared to the efficiency of films that consisted of TiO2/CNT composites. Intensification assessment was performed via detailed kinetic modelling, combining the optical properties of films, irradiation conditions and reactor mass balance. Intensification was expressed via intensification indices. Results showed the advantage of the CPC-based reactor design and an unbiased effect of sensitizing agent (CNT) in the photocatalytic film formulation.

Solvothermal synthesis of multiwall carbon nanotubes/BiOI photocatalysts for the efficient degradation of antipyrine under visible light

Antipyrine (ANT), as a widely used relieve headache, fever anti-inflammatory pharmaceutical in medical treatment, is difficult to be removed completely in water. The application of photocatalytic removal of ANT is restricted to UV light irradiation (<5% of solar energy), and the degradation pathways of ANT require more theoretical evidence. In this study, a series of three dimensions (3D) hierarchical structure multiwall carbon nanotubes/bismuth oxyiodide (MWCNTs/BiOI) photocatalysts were systematically designed and firstly applied to remove ANT through visible light (>43% of solar energy) induced photodegradation. Consequently, the as-prepared MWCNTs/BiOI photocatalysts presented superior photocatalytic activities on ANT degradation with respect to that of BiOI under 60 min visible light irradiation (100% vs 82.2%). Especially, the enhanced photocatalytic mechanism on ANT was analyzed by morphology, optical and photo-electrochemical properties. Results revealed that the designed 3D micro-mesoporous structure could promote the diffusion of photogenerated electron-hole pairs, and the utilization of photoelectrons could be efficiently improved by MWCNTs (1.5 times). Furthermore, based on radicals scavenging experiments, the photogenerated hole (h⁺) and superoxide radical (O₂^-) were demonstrated as the dominant active species in ANT photocatalytic oxidation process. The photodegradation pathways of ANT were proposed with the calculation of frontier electron densities (FEDs) and the analysis of LC-MS/MS. This study presents a feasible approach for the high efficiency removal of trace pharmaceuticals under visible light photocatalytic process.

New Core-Shell Hybrid Material IR-MOF3@COF-LZU1 for Highly Efficient Visible-Light Photocatalyst Degrading Nitroaromatic Explosives

Nitroaromatic explosives in wastewater are hardly degraded, which seriously endangers the ecological environment and human safety. We report a core-shell structure hybrid material (IR-MOF3@COF-LZU1) with high crystallinity and graded porosity. It is an effective visible-light-driven photocatalyst that degrades p-nitrophenol (PNP). After 3.5 h, PNP was degraded well under visible light, and it is proven that the photocatalytic degradation is efficient. In addition, this photocatalytic activity adhered to pseudo-first-order kinetics, and a possible photocatalytic mechanism was discussed in detail.

A review on novel composites of MWCNTs mediated semiconducting materials as photocatalysts in water treatment

Many technologies were explored to eliminate the harmful pollutants entering water systems and to minimize their impact on environment. In general, photo-catalysis is one of the sustainable techniques with wider applications and semiconductors in particular were efficiently utilized in the photocatalytic degradation of pollutants. Semiconducting materials, such as TiO₂, ZnO, BiO, CdS, and Ag₃PO₄ are frequently used as photo-catalysts due to their suggestible band gap and structural properties. The generation of reactive oxygen species such as hydroxyl and superoxide radicals is the crucial factor in degradation of pollutant molecules. The rapid recombination of photo-generated electron-hole pairs impacts on the efficacy of semiconductors as photo-catalysts. The integration of properties of multi-walled carbon nanotubes (MWCNTs) with semiconductors is considered as imperative alternative strategy to boast the photocatalytic efficiency. The combinative merits of composites of MWCNTs and various semiconductor materials give new vista for water treatment and environmental protection. This review describes the scope of different types of MWCNT and semiconductor composites as photo-catalysts and their structure-property relationships in oxidative degradation and mineralization of organic pollutants, in particular.

One stone two birds: novel carbon nanotube/Bi4VO8Cl photocatalyst for simultaneous organic pollutants degradation and Cr(VI) reduction

In this work, visible light-responsive carbon nanotubes (CNTs)/Bi₄VO₈Cl composite photocatalysts have been prepared by a facile in situ hydrothermal method and characterized by various techniques. The photocatalytic properties of the photocatalysts are evaluated by the degradation of refractory azo-dye methyl orange (MO), hexavalent chromium Cr(VI), and bisphenol A (BPA) in water under visible light irradiation. It is found that the as-prepared composite with 4 wt% CNTs shows an optimal photocatalytic performance, and its photocatalytic activity is 30% higher than that of pure Bi₄VO₈Cl. The enhanced photocatalytic activity is ascribed to the synergetic effects induced by increased light absorption, increased adsorption efficiency for pollutant, and suppressed recombination rate of photogenerated charge carriers. Furthermore, efficient removals of Cr(VI), bisphenol A (BPA), and combined contamination of Cr(VI) and BPA over CNTs/Bi₄VO₈Cl composite further confirm that the degradation of organic pollutants is a photocatalytic mechanism rather than photosensitization of dye. Of particular importance is that removal efficiency of single pollutant can be promoted by the coexistence of the Cr(VI) and organics. The mechanism of synergetic promotion is discussed and attributed to the accelerated separation of charge carriers resulted from their simultaneously being captured by pollutants. Moreover, the CNTs/Bi₄VO₈Cl composite exhibits good stability and recycling performance in the photocatalytic degradation process. Therefore, the composite photocatalysts developed in the present work are expected to have the potential in purification of complex wastewater. Graphical abstract The separation of photogenerated charge carriers and adsorbing capacity as well as visible light absorption ability of Bi₄VO₈Cl are significantly promoted by coupling with carbon nanotubes. Simultaneous removal of Cr(VI) and organic pollutants can be achieved by CNTs/Bi₄VO₈Cl composite photocatalysts under visible light irradiation.

A Novel Heterostructure of BiOI Nanosheets Anchored onto MWCNTs with Excellent Visible-Light Photocatalytic Activity

Developing efficient visible-light-driven (VLD) photocatalysts for environmental decontamination has drawn significant attention in recent years. Herein, we have reported a novel heterostructure of multiwalled carbon nanotubes (MWCNTs) coated with BiOI nanosheets as an efficient VLD photocatalyst, which was prepared via a simple solvothermal method. The morphology and structure were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (DRS), and specific surface area measurements. The results showed that BiOI nanosheets were well deposited on MWCNTs. The MWCNTs/BiOI composites exhibited remarkably enhanced photocatalytic activity for the degradation of rhodamine B (RhB), methyl orange (MO), and para-chlorophenol (4-CP) under visible-light, compared with pure BiOI. When the MWCNTs content is 3 wt %, the MWCNTs/BiOI composite (3%M-Bi) achieves the highest activity, which is even higher than that of a mechanical mixture (3 wt % MWCNTs + 97 wt % BiOI). The superior photocatalytic activity is predominantly due to the strong coupling interface between MWCNTs and BiOI, which significantly promotes the efficient electron-hole separation. The photo-induced holes (h⁺) and superoxide radicals (O₂^-) mainly contribute to the photocatalytic degradation of RhB over 3%M-Bi. Therefore, the MWCNTs/BiOI composite is expected to be an efficient VLD photocatalyst for environmental purification.

Ionic liquid-assisted strategy for bismuth-rich bismuth oxybromides nanosheets with superior visible light-driven photocatalytic removal of bisphenol-A

Novel Bi4O5Br2 photocatalysts were synthesized by a one-pot solvothermal method in the presence of reactable ionic liquid 1-hexadecyl-3-methylimidazolium bromide ([C16mim]Br). X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS) and other characterizations were applied to investigate their structures, morphologies, optical and electronic properties. Bisphenol-A (BPA) was chosen to evaluate the photocatalytic activity of Bi4O5Br2 nanosheets. After the visible light irradiation, about 91.2% of BPA were removed by Bi4O5Br2 after 3.5h with the reaction rate constant of 0.01086, which is much higher than that of the pure BiOBr (24.4%). Liquid chromatography combined with mass spectrometry (LC-MS) technique was used to track the intermediates species, showing the photocatalytic mechanism is related to photogenerated holes instead of hydroxyl radicals. The as-prepared Bi4O5Br2 also exhibited excellent stability as well as reusability, implying a great promising practical application for the photodegradation of organic pollutants.

Carbon Quantum Dots Induced Ultrasmall BiOI Nanosheets with Assembled Hollow Structures for Broad Spectrum Photocatalytic Activity and Mechanism Insight

Carbon quantum dots (CQDs) induced ultrasmall BiOI nanosheets with assembled hollow microsphere structures were prepared via ionic liquids 1-butyl-3-methylimidazolium iodine ([Bmim]I)-assisted synthesis method at room temperature condition. The composition, structure, morphology, and photoelectrochemical properties were investigated by multiple techniques. The CQDs/BiOI hollow microspheres structure displayed improved photocatalytic activities than pure BiOI for the degradation of three different kinds of pollutants, such as antibacterial agent tetracycline (TC), endocrine disrupting chemical bisphenol A (BPA), and phenol rhodamine B (RhB) under visible light, light above 580 nm, or light above 700 nm irradiation, which showed the broad spectrum photocatalytic activity. The key role of CQDs for the improvement of photocatalytic activity was explored. The introduction of CQDs could induce the formation of ultrasmall BiOI nanosheets with assembled hollow microsphere structure, strengthen the light absorption within full spectrum, increase the specific surface areas and improve the separation efficiency of the photogenerated electron-hole pairs. Benefiting from the unique structural features, the CQDs/BiOI microspheres exhibited excellent photoactivity. The h(+) was determined to be the main active specie for the photocatalytic degradation by ESR analysis and free radicals trapping experiments. The CQDs can be further employed to induce other nanosheets be smaller. The design of such architecture with CQDs/BiOI hollow microsphere structure can be extended to other photocatalytic systems.

Graphene-analogue BN-modified microspherical BiOI photocatalysts driven by visible light

3D hierarchical microspherical BN/BiOI composites showed significantly enhanced photocatalytic activity in the degradation of Rhodamine B, methylene blue and 4-chlorophenol.

Degradation of flumequine in aqueous solution by persulfate activated with common methods and polyhydroquinone-coated magnetite/multi-walled carbon nanotubes catalysts

In recent years, flumequine (FLU) has been ubiquitously detected in surface waters and municipal wastewaters. In light of its potential negative impacts to aquatic species, growing concern has been arisen for the removal of this antibiotic from natural waters. In this study, the kinetics, degradation mechanisms and pathways of aqueous FLU by persulfate (PS) oxidation were systematically determined. Three common activation methods, including heat, Fe(2+) and Cu(2+), and a novel heterogeneous catalyst, namely, polyhydroquinone-coated magnetite/multi-walled carbon nanotubes (Fe3O4/MWCNTs/PHQ), were investigated to activate PS for FLU removal. It was found that these three common activators enhanced FLU degradation obviously, while several influencing factors, such as solution pH, inorganic ions (especially HCO3(-) at 5 mmol/L) and dissolved organic matter extracts, exerted their different effects on FLU removal. The catalysts were characterized, and an efficient catalytic degradation performance, high stability and excellent reusability were observed. The measured total organic carbon levels suggested that FLU can be effectively mineralized by using the catalysts. Radical mechanism was studied by combination of the quenching tests and electron paramagnetic resonance analysis. It was assumed that sulfate radicals predominated in the activation of PS with Fe3O4/MWCNTs/PHQ for FLU removal, while hydroxyl radicals also contributed to the catalytic oxidation process. In addition, a total of fifteen reaction intermediates of FLU were identified, from which two possible pathways were proposed involving hydroxylation, decarbonylation and ring opening. Overall, this study represented a systematical evaluation regarding the transformation process of FLU by PS, and showed that the heterogeneous catalysts can efficiently activate PS for FLU removal from the water environment.

Recyclable magnetic CoFe2O4/BiOX (X = Cl, Br and I) microflowers for photocatalytic treatment of water contaminated with methyl orange, rhodamine B, methylene blue, and a mixed dye

Magnetic CoFe₂O₄/BiOX (X = Cl, Br and I) microflowers were tested for methyl orange, rhodamine B, methylene blue, and a mixed dyes.

Simulated sunlight photocatalytic degradation of aqueous p-nitrophenol and bisphenol A in a Pt/BiOBr film-coated quartz fiber photoreactor

Pt/BiOBr film-coated quartz fiber bundles were prepared by dip-coating combined with photodeposition, and their phase and chemical structures, electronic and optical properties, textural properties as well as morphologies were well-characterized.

Efficient visible-light photocatalytic degradation of sulfadiazine sodium with hierarchical Bi₇O₉I₃under solar irradiation

Bi₇O₉I₃, a kind of visible-light-responsive photocatalyst, with hierarchical micro/nano-architecture was successfully synthesized by oil-bath heating method, with ethylene glycol as solvent, and applied to degrade sulfonamide antibiotics. The as-prepared product was characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflection spectra and scanning electron microscopy (SEM). XRD and XPS tests confirmed that the product was indeed Bi₇O₉I₃. The result of SEM observation shows that the as-synthesized Bi₇O₉I₃ consists of a large number of micro-sheets with parallel rectangle structure. The optical test exhibited strong photoabsorption in visible light irradiation, with 617 nm of absorption edges. Moreover, the difference in the photocatalytic efficiency of as-prepared Bi₇O₉I₃ at different seasons of a whole year was investigated in this study. The chemical oxygen demand removal efficiency and concentration of NO(3)(-) and SO(4)(2-) of solution after reaction were also researched to confirm whether degradation of the pollutant was complete; the results indicated a high mineralization capacity of Bi₇O₉I₃. The as-synthesized Bi₇O₉I₃exhibits an excellent oxidizing capacity of sulfadiazine sodium and favorable stability during the photocatalytic reaction.

Preparation of a novel flower-like MnO2/BiOI composite with highly enhanced adsorption and photocatalytic activity

A novel flower-like MnO₂/BiOI composite has been fabricated by a simple and cost-effective approach.

Catalytic decomposition of toxic chemicals over iron group metals supported on carbon nanotubes

This study explores catalytic decomposition of phosphine (PH3) using iron group metals (Co, Ni) and metal oxides (Fe2O3, Co(3)O4, NiO) supported on carbon nanotubes (CNTs). The catalysts are synthesized by means of a deposition-precipitation method. The morphology, structure, and composition of the catalysts are characterized using a number of analytical instrumentations, including high-resolution transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, BET surface area measurement, and inductively coupled plasma. The activity of the catalysts in the PH3 decomposition reaction is measured and correlated with their surface and structural properties. The characterization results show that phosphidation occurs on the catalyst surface, and the resulting metal phosphides act as an active phase in the PH3 decomposition reaction. Cobalt phosphide, CoP, is formed on Co/CNTs and Co(3)O4/CNTs, whereas iron phosphide, FeP, is formed on Fe2O3/CNTs. In contrast, phosphorus-rich phosphide NiP2 is formed on Ni/CNTs and NiO/CNTs. The initial activities of the catalysts are shown in the following sequence: Ni/CNTs > Co/CNTs > Co(3)O4/CNTs >NiO/CNTs > Fe2O3/CNTs, whereas activities of metal phosphides are shown in the following order: CoP > NiP2 > FeP. The catalytic activity of metal phosphides is attributed to their electronic properties. Cobalt phosphide formed on Co/CNTs and Co(3)O4/CNTs exhibits not only the highest activity, but also long-term stability in the PH3 decomposition reaction.

Engineering BiOX (X = Cl, Br, I) nanostructures for highly efficient photocatalytic applications

Heterogeneous photocatalysis that employs photo-excited semiconductor materials to reduce water and oxidize toxic pollutants upon solar light irradiation holds great prospects for renewable energy substitutes and environmental protection. To utilize solar light effectively, the quest for highly active photocatalysts working under visible light has always been the research focus. Layered BiOX (X = Cl, Br, I) are a kind of newly exploited efficient photocatalysts, and their light response can be tuned from UV to visible light range. The properties of semiconductors are dependent on their morphologies and compositions as well as structures, and this also offers the guidelines for design of highly-efficient photocatalysts. In this review, recent advances and emerging strategies in tailoring BiOX (X = Cl, Br, I) nanostructures to boost their photocatalytic properties are surveyed.

Adsorption and UV/Visible photocatalytic performance of BiOI for methyl orange, Rhodamine B and methylene blue: Ag and Ti-loading effects

Adsorption and UV/visible photocatalytic activity of echinoid-like Ag and Ti-loaded BiOI were tested for methyl orange, Rhodamine B and methylene blue.