Utilization of waste phosphogypsum to prepare hydroxyapatite nanoparticles and its application towards removal of fluoride from aqueous solution

Bio-adsorbent hydroxyapatite for drinking water defluoridation: column performance modelling studies

Waste marble powder (WMP) is a rich source of calcium and magnesium salts having an affinity for fluoride ions and therefore serves as a good defluoridation agent. Hydroxyapatite was synthesized from WMP generated by the marble processing industry to make an adsorbent for drinking water defluoridation. The synthesized marble hydroxyapatite (MA-Hap LR) powder was further formed into 2-3 mm pellets by extrusion spheronization technique using a polyvinyl alcohol binder. Continuous column defluoridation studies were conducted to obtain optimized column parameters such as input fluoride concentration, column inflow rates, optimum pellet size, and adsorbent bed parameters to obtain maximum fluoride adsorption capacity. The best breakthrough column performance was a maximum adsorption capacity of 1.21 mg/g, treating 10 mg/L fluoride concentration. The optimized column flow rate was at 1 LPH using an adsorbent bed height of 25 cm, which processed 28.5-bed volumes at an adsorbent exhaustion rate of 7.4 g/L. The column breakthrough performance data were fit into various kinetic models (Thomas model and Yoon-Nelson model) to describe adsorption kinetics and obtain correlation coefficients. Thomas's model fitted well with a high correlation coefficient value. Modelling studies indicate MA-Hap as a promising adsorbent for drinking water treatment, and optimum column design parameters were identified for scale-up for real applications.

Acid precipitation-hydrothermal synthesis of needle-like hydroxyapatite for protein adsorption from waste phosphogypsum

In order to promote the high-value utilization of waste phosphogypsum (PG), hydroxyapatite was directly synthesized from PG by acid precipitation-hydrothermal method (PGHAP), which was used for the adsorption of bovine serum albumin (BSA) and lysozyme (LYS). The synthesized PGHAP was characterized by XRD, SEM, FTIR and BET, and the effects of various factors on protein adsorption capacity were studied. The results showed that PGHAP exhibits a clear needle-like morphology, high crystallinity, and an average size of about 200 nm. The pH had the greatest effect on the adsorption of protein, and the highest adsorption capacity was obtained at pH 4.0. In addition, the adsorption mechanism of protein on PGHAP was explored by adsorption kinetics and adsorption isotherm. The adsorption of protein on PGHAP conforms to the Intra-particle diffusion model kinetic model, the maximum adsorption capacity of protein on PGHAP can reach 31 mg/g, which is comparable to other adsorbents in this field. In addition, the adsorption behaviour of PGHAP on protein is more appropriately described by Langmuir isotherm model, which indicates that the binding site with uniform energy on the surface of PGHAP realizes the monolayer adsorption of protein. The main adsorption mechanisms are ion exchange, co-precipitation, complexation reaction and so on. Therefore, the needle-like PGHAP synthesized from waste PG is a protein adsorbent with industrial application potential.

Properties of Cemented Filling Materials Prepared from Phosphogypsum-Steel Slag-Blast-Furnace Slag and Its Environmental Effect

Phosphogypsum (PG) occupies a large amount of land due to its large annual production and low utilization rate, and at the same time causes serious environmental problems due to toxic impurities. PG is used for mine backfill, and industrial solid waste is a curing agent for PG, which can save the filling cost and reduce environmental pollution. In this paper, PG was used as a raw material, combined with steel slag (SS) and ground granulated blast-furnace slag (GGBS) under the action of an alkali-activated agent (NaOH) to prepare all-solid waste phosphogypsum-based backfill material (PBM). The effect of the GGBS to SS ratio on the compressive strength and toxic leaching of PBM was investigated. The chemical composition of the raw materials was obtained by XRF analysis, and the mineral composition and morphology of PBM and its stabilization/curing mechanism against heavy metals were analyzed using XRD and SEM-EDS. The results showed that the best performance of PBM was achieved when the contents of PG, GGBS, and SS were 80%, 13%, and 7%, the liquid-to-solid ratio was 0.4, and the mass concentration of NaOH was 4%, with a strength of 2.8 MPa at 28 days. The leaching concentration of fluorine at 7 days met the standard of groundwater class IV (2 mg/L), and the leaching concentration of phosphorus was detected to be less than 0.001 mg/L, and the leaching concentration of heavy metals met the environmental standard at 14 d. The hydration concentration in PBM met the environmental standard. The hydration products in PBM are mainly ettringite and C-(A)-S-H gel, which can effectively stabilize the heavy metals in PG through chemical precipitation, physical adsorption, and encapsulation.

Transformative and sustainable insights of agricultural waste-based adsorbents for water defluoridation: Biosorption dynamics, economic viability, and spent adsorbent management

With the progression of civilization, the harmony within nature has been disrupted, giving rise to various ecocidal activities that are evident in every spheres of the earth. These activities have had a profound and far-reaching impact on global health. One significant example of this is the presence of fluoride in groundwater exceeding acceptable limits, resulting in the widespread occurrence of "Fluorosis" worldwide. It is imperative to mitigate the concentration of fluoride in drinking water to meet safety standards. While various defluoridation techniques exist, they often have drawbacks. Biosorption, being a simple, affordable and eco-friendly method, has gained preference for defluoridation. However, its limited commercialization underscores the pressing need for further research in this domain. This comprehensive review article offers a thorough examination of the defluoridation potential of agro-based adsorbents, encompassing their specific chemical compositions and preparation methods. The review presents an in-depth discussion of the factors influencing fluoride biosorption and conducts a detailed exploration of adsorption isotherm and adsorption kinetic models to gain a comprehensive understanding of the nature of the adsorption process. Furthermore, it evaluates the commercial viability through an assessment of regeneration potential and a cost analysis of these agro-adsorbents, with the aim of facilitating the scalability of the defluoridation process. The elucidation of the adsorption mechanism and recommendations for overcoming challenges in large-scale implementation offer a comprehensive outlook on this eco-friendly and sustainable approach to fluoride removal. In summary, this review article equips readers with a lucid understanding of agro-adsorbents, elucidates their ideal conditions for improved performance, offers a more profound insight into the fluoride biosorption mechanism, and introduces the concept of effective spent adsorbent management.

Review of the State of Impurity Occurrences and Impurity Removal Technology in Phosphogypsum

A variety of co-existing impurities in phosphogypsum limit its large-scale and high-value utilization. This paper summarizes the common contents of major impurity components (silicon and phosphorus) and trace impurity components (fluorine, iron, aluminum, and carbon) in phosphogypsum and discusses the harm of impurity components to the comprehensive utilization of harmless phosphogypsum chemical resources. The occurrence status of impurity components in phosphogypsum and the research progress of various impurity removal technologies are summarized, and the effects of these impurity removal technologies on different contents of impurity components are evaluated. On this basis, the goal of improving the whiteness of phosphogypsum samples and the development of technology for further removal of impurities in phosphogypsum to improve the purity of the main content of calcium sulfate are speculated.

In-situ remediation of phosphogypsum in a cement-free pathway: Utilization of ground granulated blast furnace slag and NaOH pretreatment

In-situ remediating phosphogypsum (PG) for cemented paste backfill (CPB) in the contaminated site is economic management for promoting sustainable developments in the phosphate industry. This study concerns the combined use of NaOH pretreatment and ground-granulated blast furnace slag (GGBFS) additives to promote the solidification/stabilization of PG with a lower carbon footprint pathway. According to physico-chemical analyses, the NaOH pretreatment effectively removed approximately 95% of F within the PG, which may originally be present as sparingly soluble fluorides or coexisting with silicates. The micro mineralogical characterization illustrates that the pretreatment can accelerate the early age hydration, with more hydration products observed, including calcium silicate hydrates and ettringite, effective F and P retention candidates. Whereas the incorporation of GGBFS plays an essential role in promoting the generation of additional cement hydrates at the following stages. The macro mechanical performance analysis indicates that the mixtures of pretreated-PG-OPC-GGBFS exhibit an excellent mechanical performance satisfying the design criteria. Subsequent elemental mapping and toxicity characteristic leaching procedures demonstrate that this combined approach has a competitive F and P immobilization ability compared to the typical OPC binder and individual GGBFS addition. The newly formed phases effectively controlled the concentration of F and P through adsorption, incorporation, or encapsulation. Objectively, the proposed methodology can be a promising candidate pathway for extrapolating the in-situ immobilization of PG. This study opens up new perspectives for synergetically recycling PG and GGBFS in a profitable and low carbon footprint way.

Highly-efficient fluoride retention in on-site solidification/stabilization of phosphogypsum: Cemented paste backfill synergizes with poly-aluminum chloride activation

Phosphogypsum (PG) is a massively generated hazardous by-product in the phosphorus industry. Large-scale, efficient, profitable on-site recycling is an emerging topic for promoting sustainable phosphorus circularity and mitigating potential human exposure. In this work, we integrated a green and low-cost additive polymeric aluminum chloride (PAC) into the binder design of PG immobilization. The overall experimental results illustrate that the incorporation of PAC can efficiently promote the cement hydration reaction, with amorphous phases increased from 25.9 wt% (control group) to 27.5 wt% (with 2 g/L PAC). The macro-investigations indicate that the PAC optimized the porosity and mechanical properties of specimens, facilitating a mechanically stable solidified matrix for extrapolating its field engineering application. The detailed micrographs and elemental mapping demonstrate that apart from co-existing with the hydration products, the PAC agent plays a role in the immobilization of fluoride. Herein, the combined optimization enhanced the fluoride retention capacity due to the precipitated additional hydration products, comparable encapsulation, and high adsorption ability of PAC agents. Therefore our design of PAC-augmented binders can open up a new field of PG on-site solidification/stabilization application that ensures efficient fluoride retention in a technically feasible and financially profitable methodology.

Essence of hydroxyapatite in defluoridation of drinking water: A review

Hydroxyapatite (HAP) is an easily synthesizable, low-cost mineral that has been recognized as a potential material for fluoride removal. Some of the synthesis methods of HAP are quite straightforward and cost-effective, while some require sophisticated synthesis techniques under advanced laboratory conditions. This review assesses the physicochemical characteristics of HAP and HAP-based composites produced via various techniques, their recent development in defluoridation and most importantly, the fluoride removal performances. For the first time, fluoride removal performances of HAP and HAP composites are compared based on partition coefficient (K_D) instead of maximum adsorption capacity (Q_max), which is significantly influenced by initial loading concentrations. Novel HAP tailored composites exhibit comparatively high K_D values indicating the excellent capability of fluoride removal along with specific surface areas above 120 m²/g. HAP doped with aluminium complexes, HAP doped ceramic beads, HAP-pectin nanocomposite and HAP-stilbite nanocomposite, HAP decorated nanotubes, nanowires and nanosheets demonstrated high Q_max and K_D. The secret of HAP is not the excellent fluoride removal performances but best removal at neutral and near-neutral pH, which most of the defluoridation materials are incapable of, making them ideal adsorbents for drinking water treatment. Multiple mechanisms including physical surface adsorption, ion-exchange, and electrostatic interactions are the main mechanisms involved in defluoridation. Further research work must be focused on upscaling HAP-based composites for defluoridation on a commercial scale.

Utilization path of bulk industrial solid waste: A review on the multi-directional resource utilization path of phosphogypsum

Phosphogypsum is one of the hottest issues in the field of environmental solid waste treatment, with complex and changeable composition. Meanwhile, phosphogypsum contains a large number of impurities, thus leading to the low resource utilization rate, and it can only be stockpiled in large quantities. Phosphogypsum occupies a lot of land and poses a serious pollution threat to the ecological environment. This paper mainly summarizes the existing pretreatment and resource utilization technology of phosphogypsum. The pretreatment mainly includes dry method and wet method. The resource utilization technology mainly includes building materials, chemical raw materials, agriculture, environmental functional materials, filling materials, carbon sequestration and rare and precious extraction. Although there are many aspects of resource utilization of phosphogypsum, the existing technology is far from being able to consume a large amount of accumulated and generated phosphogypsum. Through the analysis, the comparison and mechanism analysis of the existing multifaceted and multi-level resource treatment technologies of phosphogypsum, the four promising resource utilization directions of phosphogypsum are put forward, mainly including prefabricated building materials, eco-friendly materials and soil materials, and new green functional materials and chemical fillers. Moreover, this paper summarizes the research basis of multi field and all-round treatment and disposal of phosphogypsum, which reduces repeated researches and development, as well as the treatment cost of phosphogypsum. This paper could provide a feasible research direction for the resource treatment technology of phosphogypsum in the future, so as to improve the consumption of phosphogypsum and reduce environmental risks.

Management of Solid Waste Containing Fluoride-A Review

Technological and economic development have influenced the amount of post-production waste. Post-industrial waste, generated in the most considerable amount, includes, among others, waste related to the mining, metallurgical, and energy industries. Various non-hazardous or hazardous wastes can be used to produce new construction materials after the “solidification/stabilization” processes. They can be used as admixtures or raw materials. However, the production of construction materials from various non-hazardous or hazardous waste materials is still very limited. In our opinion, special attention should be paid to waste containing fluoride, and the reuse of solid waste containing fluoride is a high priority today. Fluoride is one of the few trace elements that has received much attention due to its harmful effects on the environment and human and animal health. In addition to natural sources, industry, which discharges wastewater containing F− ions into surface waters, also increases fluoride concentration in waters and pollutes the environment. Therefore, developing effective and robust technologies to remove fluoride excess from the aquatic environment is becoming extremely important. This review aims to cover a wide variety of procedures that have been used to remove fluoride from drinking water and industrial wastewater. In addition, the ability to absorb fluoride, among others, by industrial by-products, agricultural waste, and biomass materials were reviewed.

Adsorption and solidification of cadmium by calcium sulfate dihydrate (gypsum) in an aqueous environment: a dispersion-corrected DFT and ab initio molecular dynamics study

Phosphogypsum is a by-product of phosphoric acid production by a wet-process and can be used to prepare adsorption materials to treat Cd(II) in sewage. Its main component is calcium sulfate dihydrate (gypsum). In the present study, incorporation and adsorption of cadmium on gypsum in an aqueous environment have been investigated using dispersion-corrected density functional theory, and the effect of different vacancy defects on the adsorption and doping of Cd on gypsum was also studied. The results show that Cd impurity defects can form more easily in gypsum crystals with Ca vacancy defects. The increase in both calcium vacancy defects and sulfate vacancy defects is beneficial to the incorporation of Cd in calcium sulfate dihydrate. In addition, the calcium vacancy defects on the gypsum surface can promote the adsorption of Cd(II), while sulfate vacancy defects on the gypsum surface inhibit the adsorption of Cd(II). Therefore, increasing the Ca vacancy defects of gypsum will help in improving the adsorption and curing properties of phosphogypsum for cadmium.

Hydroxyapatite Fabrication for Enhancing Biohydrogen Production from Glucose Dark Fermentation

Hydroxyapatite (HA) had the effect of maintaining the pH balance of the reaction system and promoting enzyme activity. In this work, hydroxyapatite was synthesized by coprecipitation and characterized for biohydrogen (bioH₂) production from glucose. The highest bioH₂ yield obtained was 182.33 ± 2.41 mL/g glucose, amended with an optimal dosage of 400 mg/L HA, which was a 55.80% higher bioH₂ yield compared with the control group without any addition. The results indicated that HA facilitated the deterioration of organic substances and increased the concentration of soluble microbial products (SMPs). Microbial community analysis revealed that HA significantly increased the abundance of Firmicutes from 35.27% (0 mg/L, HA) to 76.41% (400 mg/L, HA), which played an essential role in bioH₂ generation. In particular, the abundance of Clostridium sensu stricto 1 increased from 15.33% (0 mg/L HA) to 45.17% (400 mg/L HA) and became the dominant bacteria. The results also indicated that HA likely improves bioH₂ production from organic wastewater in practice.

A Novel Process to Recover Gypsum from Phosphogypsum

In this study, we investigated a coarse phosphogypsum containing 49.63% SO₃, 41.41% CaO, 10.68%, 4.47% SiO₂, 1.28% P₂O₅, 0.11% F, CaSO₄·2H₂O purity of 80.65%, and whiteness of 27.68. Phosphogypsum contains calcium sulfate dehydrate as the main mineral, with small amounts of brushite, quartz, muscovite, and zoisite. Harmful elements, such as silicon, phosphorus, and fluorine, are mainly concentrated in the +0.15 mm and −0.025 mm fraction, which can be pre-selected and removed by the grading method to further increase the CaSO₄·2H₂O content. Gypsum was recovered using a direct flotation method, which included one roughing, one scavenging, and two cleaning operations, from −0.15 mm to +0.025 mm. The test results show that a gypsum concentrate with a CaSO₄·2H₂O purity of 98.94%, CaSO₄·2H₂O recovery of 80.02%, and whiteness of 37.05 was achieved. The main mineral in the gypsum concentrate was gypsum, and limited amounts of muscovite and zoisite entered the gypsum concentrate because of the mechanical entrainment of the flotation process.

Hydroxyapatite-based adsorbents: Applications in sequestering heavy metals and dyes

Hydroxyapatite (HAp) is a calcium phosphate material that was used primarily in bone regeneration and repair as a result of its chemical similarity with bone. However, HAp has emerged as a very promising adsorbent for sequestering contaminants like heavy metals, dyes, hydrocarbons as well as other emerging pollutants from wastewater as a result of its versatility and encouraging adsorptive properties. Contaminants like heavy metals and dyes have been a major source of environmental concern. Research studies involving the use of HAp as adsorbents for the adsorptive treatment of heavy metal- and dye-contaminated wastewater have become increasingly popular due to its eco-friendliness, easy synthesis, unique adsorption properties etc. Various methods are available for the synthesis of HAp and its composites with some of these methods used in combination with other methods to obtain more efficient HAp-based adsorbents. In this work, the adsorptive removal of heavy metals and dyes by HAp and its composites was extensively reviewed as well as the parametric effects of process factors like contact time, solution pH, temperature, solute concentration etc on the adsorption process. Kinetic, thermodynamic, and isotherm models for elucidating the adsorption process were also considered. Generally, from the works reviewed, HAp-based adsorbents were found to be very effective for sequestering heavy metals and dyes from solution and thus presents a low-cost option for adsorptive wastewater treatment.

Effect of phosphogypsum on the properties of magnesium phosphate cement paste with low magnesium-to-phosphate ratio

The incorporation of phosphogypsum (PG) in magnesium potassium phosphate cement (MPPC) can promote the utilization of PG not only by utilising the phosphate impurity in PG, but also by immobilising the heavy metals with MPPC. This paper investigates the feasibility of the incorporation of PG in preparing MPPC. Both early age properties, including workability and setting time, and hardened properties of compressive strength and microstructure, of PG-incorporated MPPC paste were investigated, and the hydration mechanism was explored. The results indicated that the addition of PG increased the workability of MPPC and extended the setting time of MPPC. However, incorporation of 20% PG slightly reduced the compressive strength because higher PG content led to the loose microstructure. Moreover, the addition of PG did not change the formation of hydration product, while it only reduced the hydration heat. Finally, compared to PG, the concentration of leached heavy metals of MPPC with PG was significantly reduced after 28 days curing.

Low-Carbon Sustainable Composites from Waste Phosphogypsum and Their Environmental Impacts

Phosphogypsum (PG) is an industrial waste from the production of phosphoric acid and phosphate fertilizer. Disposal and landfill of PG pose significant environmental problems due to its hazardous components. Although many researchers have explored the possibility of PG recycling, challenges still exist before it can be high-effectively reused. In particular, a great deal of recent attention has been attracted to explore using PG as raw material to manufacture sustainable composites. The impurities movement, recycling efficiency, and environmental impacts have to be further investigated. This review article summarized the state of the art of the purification process, application areas, and the environmental impacts of PG waste. The main challenges and potential application approaches were discussed. This article is focused on reviewing the details of the PG reusing which benefits the readers on learning the knowledge from previous efforts. The main challenges of reusing PG were discussed from the chemical, physical, and materials perspectives.

Study on the Kinetics of Hydration Transformation from Hemihydrate Phosphogypsum to Dihydrate Phosphogypsum in Simulated Wet Process Phosphoric Acid

The key technology of wet process phosphoric acid recrystallization is phosphogypsum phase transformation. In this study, the hydration of α-hemihydrate phosphogypsum (α-HH) to dihydrate phosphogypsum (DH) and the influence of process parameters on hydration kinetics are performed by modifying a dispersive kinetic model in the simulation of wet process phosphoric acid recrystallization. Results show that the modified dispersive kinetic model is very important in describing the entire kinetic process, indicating that α-HH-DH hydration includes induction of nucleation and growth restriction. The hydration rate of α-HH-DH substantially accelerates with the decrease of temperature and phosphoric acid concentration because the activation entropy of the reaction increases during the induction stage and the growth stage, which reduces the activation energy barrier. Moreover, the hydration rate of α-HH-DH considerably accelerates with the increase of SO₄ ^2- ion concentration. Activation entropy increases in the induction stage, causing the activation energy barrier to decrease. Activation enthalpy increases in the growth stage, causing the activation energy barrier to decrease. The influence of process parameters on the rate of the α-HH-DH hydration reaction follows the order SO₄ ^2- ion concentration > phosphoric acid concentration > temperature. Therefore, controlling the three parameters of temperature, phosphoric acid concentration, and SO₄ ^2- ion concentration are important for improving the conversion rate of α-HH-DH and the purity of DH products in the production of wet process phosphoric acid.

Enhanced fluoride removal behaviour and mechanism by dicalcium phosphate from aqueous solution

Dicalcium phosphate was prepared by ethylenediaminetetraacetic acid as a calcium chelating agent, and further explored to remove the fluoride ions from aqueous solution. The as-prepared samples main existed in the monetite phase from the result of XRD. The dried sample consisted of small nanoparticles and displayed irregular particles with a size of ca. 3 μm due to the agglomeration. The fluoride removal ability was evaluated by batch adsorption experiments. The as-prepared adsorbent exhibited the enhanced fluoride removal behaviour with the maximum adsorption capacity of 66.72 mg/g from the Langmuir isotherm model, which was higher than that of other previously reported calcium phosphate. The adsorbent could be utilized in the wide pH range of 3-10. The adsorption kinetics could be better described by the pseudo-second-order model than first-second-order model. The co-existing anions had a negligible influence on the fluoride adsorption. The investigation of adsorption mechanism suggested that the chemical reaction and/or dissolution - precipitation mechanism should be dominant in the fluoride adsorption process, accompanying with electronic interaction and ions exchange, which enhanced the fluoride removal performance.

An innovative method for synergistic stabilization/solidification of Mn2+, NH4+-N, PO43- and F- in electrolytic manganese residue and phosphogypsum

Electrolytic manganese residue (EMR) contains large quantities of manganese (Mn²⁺) and ammonia nitrogen (NH₄⁺-N). Phosphogypsum (PG) contains plenty of phosphate (PO₄^3-), fluorine (F^-) and some heavy metals. Separate storage of EMR and PG could seriously damage the ecological environment. In this study, synergistic stabilization/solidification (S/S) of EMR and PG was studied. The effects of EMR:PG mass ratio, S/S pH, solid-liquid ratio and temperature on the concentrations of NH₄⁺-N, PO₄^3-, Mn²⁺ and F^- in the leaching solution, and the characteristics of EMR and PG were studied. Meanwhile, the synergistic S/S mechanisms of EMR and PG, and leaching test were investigated. The results showed that the concentrations of F^-, PO₄^3-, NH₄⁺-N and Mn²⁺ in the leaching solution were 4.5 mg/L, 13.6 mg/L, 55.5 mg/L and 0.8 mg/L, respectively, when the mass ratio of EMR to PG was 1:2 and the pH was 9.0 adjusted by MgO after 20 days S/S. Manganese was mainly solidified as Mn₃(PO₄)₂·7H₂O and Mn(OH)₂, and ammonia nitrogen was mainly stabilized as struvite; fluorine was mainly stabilized as (Mn, Ca, Mg)F₂, and phosphate was mainly solidified as (Mn, Ca, Mg)₃(PO₄)₂ and (Mn, Ca, Mg)HPO₄. The leaching test results showed that PO₄^3- and NH₄⁺-N were reduced to 13.6 mg/L and 55.5 mg/L, respectively, and the concentrations of all the measured heavy metals and F^- were within the permitted level for the GB8978-1996 after 20 days S/S.

Activated Carbon from Prickly Pear Seed Cake: Optimization of Preparation Conditions Using Experimental Design and Its Application in Dye Removal

In the present study, the experimental design method was used to optimize the preparation conditions of an activated carbon from prickly pear seed cake by phosphoric acid activation. The parameters studied include impregnation ratio, carbonization temperature, and carbonization time. The optimal conditions for the preparation of the activated carbon with high adsorption capacity for methylene blue were identified to be an impregnation ratio of 2.9, carbonization temperature of 541°C, and carbonization time of 88 min. The obtained activated carbon was characterized by SEM/EDX, FTIR, pHpzc, and its capacity to adsorb methylene blue. FTIR analysis and pHPZC showed the acidic character of the activated carbon surface. The adsorption capacity of the optimal activated carbon was found to be 260 mg·g−1 for methylene blue. The adsorption equilibrium of methylene blue was well explained by the pseudo-second-order model and Freundlich isotherm. Furthermore, the performance of the produced activated carbon was examined by the methyl orange removal.

Fabrication of Porous Hydroxyapatite Granules as an Effective Adsorbent for the Removal of Aqueous Pb(II) Ions

Porous hydroxyapatite (HAp) granules have been successfully fabricated from a HAp powder precursor and polyvinyl alcohol (PVA) additive by a simple sintering process. The composition and microstructures of the HAp were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM) equipped with an energy dispersive X-ray (EDX) spectrometer. The effects of sintering temperature and PVA/HAp mass ratios on color, water stability, morphology, and chemical composition of HAp are discussed. Optimum conditions for the fabrication of HAp granules were found to be a PVA/HAp mass ratio of 3/20 and a sintering temperature of 600°C for 4 h. Accordingly, the obtained HAp is white in color, is in the granular form with a size of about 2 × 10 mm, and has a specific surface area of 70.6 m2/g. The adsorption of Pb2+ onto the as-prepared HAp granules was carried out in aqueous solution by varying the pH, the adsorbent dose, the initial concentration of Pb2+, and the contact time. The results of adsorption stoichiometry of Pb2+ on the HAp granule adsorbent were fitted to the Langmuir adsorption isotherm model (R2 = 0.99). The adsorption capacity and removal efficiency of the HAp granule adsorbent for Pb2+ under optimal conditions were found to be 7.99 mg/g and 95.92%, respectively. The adsorption process obeyed a pseudo-second-order kinetic model with R2∼1. The porous HAp granules studied in this work showed potential for the removal of Pb2+ from industrial wastewater.

Super rapid removal of copper, cadmium and lead ions from water by NTA-silica gel

A silica gel material modified with nitrilotriacetic acid (NTA-silica gel) was sensibly designed and prepared via a simple method for the super rapid removal of Cu²⁺, Cd²⁺ and Pb²⁺ from water.

The preparation of hydroxyapatite from unrefined calcite residues and its application for lead removal from aqueous solutions

Calcite originating from waste treatment technologies was utilised for the chemical precipitation of hydroxyapatite (HAP). The physicochemical properties of the as-synthesised-HAP was fully characterised using FT-IR, BET, SEM and TEM, confirming its crystal structure and formation of high purity HAP by XRD. The product was employed for removal of lead from aqueous media at pH 5.0, achieving almost 80% of the adsorption in the first 5 min and a maximum adsorption capacity for Pb²⁺ of 224.4 mg g⁻¹. A contact time of 40 min was required to achieve equilibrium with Pb²⁺ uptake of 98%. The kinetics of the cation exchange of HAP from calcite were predicted using integrated rate laws, revealing a pseudo-second order cation exchange process with a rate constant of 6.84 × 10⁻⁴ g (mg min)⁻¹. All obtained results are benchmarked against a control HAP sample simultaneously derived from eggshells, which were demonstrated to offer slower kinetics of cation exchange (4.82 × 10⁻⁴ g (mg min)⁻¹) and almost half the maximum adsorption capacity (129.1 mg g⁻¹). The results showed that hydroxyapatite synthesised from calcite waste represents a low-cost material for the adsorption of hazardous Pb²⁺ in contaminated waters and a promising alternative for heavy metals remediation in aquatic environments.

HAP is synthesized directly from waste calcite and is demonstrated to sequester lead at a quicker rate than comparable materials.

Improved nanocomposite of montmorillonite and hydroxyapatite for defluoridation of water

A novel hydroxyapatite montmorillonite (HAP-MMT) nanocomposite system was synthesized using a simple wet chemical in situ precipitation method. Neat nano hydroxyapatite (HAP) was also synthesized for comparison. The characterization of the materials was carried out using Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) and Brunauer–Emmett–Teller (BET) isotherms to study the functional groups, morphology, crystallinity and the surface area respectively. Batch adsorption studies and kinetic studies on fluoride adsorption were conducted for the HAP-MMT system and for neat HAP. The effect of parameters such as contact time, pH, initial concentration, temperature, and thermodynamic parameters and the effect of coexisting ions on fluoride adsorption by HAP-MMT were studied. Results of the isotherm experiments were fitted to four adsorption isotherm models namely Langmuir, Freundlich, Temkin and Dubinin Radushkevich. Fluoride adsorption over HAP-MMT fitted to the Freundlich adsorption isotherm model and showed more than two-fold improved adsorption capacity (16.7 mg g⁻¹) compared to neat HAP. The best-fitting kinetic model for both adsorbents was found to be pseudo second order. Calculated thermodynamic parameters indicated that the fluoride adsorption by HAP-MMT is more favorable compared to that on HAP within the temperature range of 27 °C–60 °C. Improved fluoride adsorption by HAP-MMT is attributed to the exfoliated nature of HAP-MMT. Gravity filtration studies carried out using a 1.5 ppm fluoride solution, which is closer to the ground water fluoride concentrations of Chronic Kidney Disease of unknown etiology (CKDu) affected areas in Sri Lanka, resulted in a 1600 ml g⁻¹ break through volume indicating the potential of HAP-MMT to be used in real applications.

A novel hydroxyapatite montmorillonite (HAP-MMT) nanocomposite was synthesized using a simple wet chemical in situ precipitation method. This nanocomposite showed improved adsorption properties towards fluoride ions in water.

Application of hydroxyapatite and its modified forms as adsorbents for water defluoridation: an insight into process synthesis

Fluorosis is a major scourge in many countries caused by prolonged consumption of drinking water with high fluoride content found in groundwater resources. Hydroxyapatite (Hap) and its composite forms are excellent biomaterials that recently gained attention as efficient adsorbents, owing to its physical and chemical nature as it can substitute both cationic and anionic complexes present in an aqueous solution in its atomic arrangement. Its biological nature, biocompatibility and biodegradability along with its chemical characteristics such as crystallinity, stability, ion adsorption capability and highly specific catalytic activity make it suitable for a variety of applications especially in water treatment for fluoride removal. This review describes various techniques for synthesis of a wide variety of biogenic, synthetic, composite and modified forms of Hap for application in water defluoridation. Hap derived from natural sources or synthesized using conventional methods, hydrothermal, sol-gel or advanced sonication-cum-precipitation technique varied in terms of its crystallinity, structure, size, etc., which affect the fluoride removal capacity. The advantage and disadvantages of various synthesis methods, process parameters and product characteristics have been compiled, which may help to identify a suitable synthesis method for a desired Hap product for potential application and future perspectives in water treatment.

Crustacean derived calcium phosphate systems: Application in defluoridation of drinking water in East African rift valley

Calcium phosphate adsorbents, derived from prawns and crabs shell biomass wastes have been developed using wet chemistry and low temperature treatment. The adsorbents were characterized by X-ray diffractometry and Fourier transform infrared spectroscopy. Batch adsorption test were carried out to investigate their effectiveness in adsorption of fluoride from ground and surface waters. Adsorption capacities were compared with bone char and synthetic hydroxyapatite (CCHA). Results indicate that prawns derived adsorbent (PHA) formed hexagonal structure with phases identifiable with hydroxyapatite while crabs based adsorbent (CHA) formed predominantly monoclinic structure with crystalline phase characteristic of brushite. Vibrational analysis and kinetic studies predicted defluoridation occurred mainly by ion exchange and ion adsorption mechanisms. Defluoridation capacity of the adsorbents was found to be superior compared to bone char and CCHA. CHA was the most effective with efficiencies above 92% and highest capacity of 13.6 mg/g in field water with fluoride concentration of 5-70 mg/L. PHA had highest capacity of 8.5 mg/g which was still better than 2.6 mg/g recorded by CCHA and bone char. Adsorption was best described by pseudo 2nd order kinetics. The findings indicate that crustacean derived calcium phosphate systems have better potential for defluoridation than traditional bone char and synthetic systems.

Comprehensive Understanding of the Kinetics and Mechanism of Fluoride Removal over a Potent Nanocrystalline Hydroxyapatite Surface

Hydroxyapatite (HAp) was successfully synthesized from egg shells, a low cost and easily available biodegradable waste, by the precipitation method and characterized by X-ray diffraction (XRD), scanning electron microscopy, Fourier transform infrared, and Brunauer-Emmett-Teller (BET) surface area analysis. The surface area of HAp was found to be 144 m²/g with a crystalline size of 9-99 nm from the BET and XRD data. The maximum fluoride removal efficiency within 1 h using 0.3 g of the synthesized adsorbent at pH 6 was 95%. The adsorption of fluoride followed second-order kinetics, indicating that chemisorptions are the rate-limiting step. The experimental data were well fitted with Langmuir and Freundlich isotherms, validating both monolayer and multilayer sorption during the fluoride adsorption onto the porous HAp. The positive adsorption of F^- ions at the HAp interface can be attributed to ion exchange/ion pairing and H-bonding below the pH_pzc of HAp (pH_pzc = 8), and the negative adsorption can be attributed to the electrostatic repulsion between O^- and F^- ions at alkaline pH. Both physical and chemical adsorption phenomena were also evidenced from the molecular parking area data. The results of a batch experiment show that the HAp synthesized from egg shells can be used as an effective, low-cost adsorbent for fluoride removal from a contaminated aqueous solution as well as groundwater compared to other adsorbents.

A 2D-g-C3N4 nanosheet as an eco-friendly adsorbent for various environmental pollutants in water

A novel graphitic carbon nitride (g-C₃N₄) nanosheet adsorbent with a large surface area, remarkable hydrophilicity and high adsorption capacity, was presented for the removal of cadmium ions (Cd²⁺) and methylene blue (MB) from aqueous solution. Adsorption measurements were conducted systematically to study the influences of the contact time, initial concentrations of Cd²⁺ and MB, temperature, and pH value. The maximum adsorption capacities of g-C₃N₄ towards Cd²⁺ and MB were 94.4 and 42.1 mg g^-1, respectively, at 318.5 K when the initial concentrations of Cd²⁺ and MB were 200 and 20 mg L^-1, respectively. The adsorption kinetics fit a pseudo-second-order model. The high adsorption performance of the g-C₃N₄ adsorbent can be attributed to the multiple adsorption sites on g-C₃N₄, including the π-π conjugate interactions and electrostatic attractions with pollutants in water. In addition, it is significant to achieve high adsorption performance of g-C₃N₄ nanosheets by efficiently exposing the adsorption sites by adjusting the microstructure surface properties and dispersity in solution.

Performance of novel hydroxyapatite nanowires in treatment of fluoride contaminated water

Novel ultralong hydroxyapatite (HAP) nanowires were successfully prepared for fluoride removal for the first time. The fluoride adsorption on the HAP nanowires was studied on a batch mode. The results revealed that the adsorption data could be well described by the Freundlich model, and the adsorption kinetic followed the pseudo-second-order model. The maximum of adsorption capacity was 40.65 mg/g at pH 7.0 when the fluoride concentration is 200mg/L. The thermodynamic parameters suggested that the adsorption of fluoride was a spontaneous endothermic process. The FT-IR, XPS and Zeta potential analysis revealed that both anion exchange and electrostatic interactions were involved in the adsorption of fluoride. Furthermore, the HAP nanowires were made into HAP membrane through a simple process of suction filtration. Membrane filtration experiments revealed that the fluoride removal capabilities depended on the membrane thickness, flow rate and initial concentration of fluoride. The as-prepared membrane could remove fluoride efficiently through continues filtration. The filtered water amount could reach 350, 192, and 64 L/m(2) when the fluoride concentrations were 4, 5 and 8 ppm, respectively, using the HAP membrane with only 150 μm thickness. The as-synthesized ultralong HAP nanowires were thus demonstrated to be very effective and biocompatible adsorbents for fluoride removal from contaminated water.

Advances in nanomaterial based approaches for enhanced fluoride and nitrate removal from contaminated water

Various nanomaterials for fluoride and nitrate removal from contaminated water.

Performance and mechanism of hierarchically porous Ce–Zr oxide nanospheres encapsulated calcium alginate beads for fluoride removal from water

Hierarchically porous Ce–Zr metal oxide nanospheres encapsulated calcium alginate millimeter-sized beads showed a high efficiency for fluoride removal from water.

Microwave-Assisted Hydrothermal Rapid Synthesis of Calcium Phosphates: Structural Control and Application in Protein Adsorption

Synthetic calcium phosphate (CaP)-based materials have attracted much attention in the biomedical field. In this study, we have investigated the effect of pH values on CaP nanostructures prepared using a microwave-assisted hydrothermal method. The hierarchical nanosheet-assembled hydroxyapatite (HAP) nanostructure was prepared under weak acidic conditions (pH 5), while the HAP nanorod was prepared under neutral (pH 7) and weak alkali (pH 9) condition. However, when the pH value increases to 11, a mixed product of HAP nanorod and tri-calcium phosphate nanoparticle was obtained. The results indicated that the pH value of the initial reaction solution played an important role in the phase and structure of the CaP. Furthermore, the protein adsorption and release performance of the as-prepared CaP nanostructures were investigated by using hemoglobin (Hb) as a model protein. The sample that was prepared at pH = 11 and consisted of mixed morphologies of nanorods and nanoprisms showed a higher Hb protein adsorption capacity than the sample prepared at pH 5, which could be explained by its smaller size and dispersed structure. The results revealed the relatively high protein adsorption capacity of the as-prepared CaP nanostructures, which show promise for applications in various biomedical fields such as drug delivery and protein adsorption.

Enhanced defluoridation and facile separation of magnetic nano-hydroxyapatite/alginate composite

In this research study, a new magnetic biosorbent was developed by the fabrication of magnetic Fe3O4 particles on nano-hydroxyapatite(n-HAp)/alginate (Alg) composite (Fe3O4@n-HApAlg composite) for defluoridation in batch mode. The synthesized Fe3O4@n-HApAlg biocomposite possess an enhanced defluoridation capacity (DC) of 4050 mgF(-)/kg when compare to n-HApAlg composite, Fe3O4@n-HAp composite, n-HAp and Fe3O4 which possesses the DCs of 3870, 2469, 1296 and 1050 mgF(-)/kg respectively. The structural changes of the sorbent, before and after fluoride sorption were studied using FTIR, XRD and SEM with EDAX techniques. There are various physico-chemical parameters such as contact time, pH, co-existing anions, initial fluoride concentration and temperature were optimized for maximum fluoride removal. The equilibrium data was well modeled by Freundlich, Langmuir, Dubinin-Radushkevich (D-R) and Temkin isotherms. The present system follows Dubinin-Radushkevich isotherm model. The thermodynamic parameters reveals that the feasibility, spontaneity and endothermic nature of fluoride sorption. The performance and efficiency of the adsorbent material was examined with water samples collected from fluoride endemic areas namely Reddiyarchatram and Ammapatti in Dindigul District of Tamil Nadu using standard protocols.

Preparation and defluorination mechanism of a novel copolymerized hydroxyapatite–aluminium chloride material

This paper offers a novel copolymerized hydroxyapatite–aluminum (HAP–PAC) adsorbent and evaluates its performance in fluoride removal of drinking water, and a possible fluoride removal mechanism is proposed.

A Review on Adsorption of Fluoride from Aqueous Solution

Fluoride is one of the anionic contaminants which is found in excess in surface or groundwater because of geochemical reactions or anthropogenic activities such as the disposal of industrial wastewaters. Among various methods used for defluoridation of water such as coagulation, precipitation, membrane processes, electrolytic treatment, ion-exchange, the adsorption process is widely used. It offers satisfactory results and seems to be a more attractive method for the removal of fluoride in terms of cost, simplicity of design and operation. Various conventional and non-conventional adsorbents have been assessed for the removal of fluoride from water. In this review, a list of various adsorbents (oxides and hydroxides, biosorbents, geomaterials, carbonaceous materials and industrial products and by-products) and its modifications from literature are surveyed and their adsorption capacities under various conditions are compared. The effect of other impurities on fluoride removal has also been discussed. This survey showed that various adsorbents, especially binary and trimetal oxides and hydroxides, have good potential for the fluoride removal from aquatic environments.