Degradation of organic pollutants by an integrated photo-Fenton-like catalysis/immersed membrane separation system

Construction of Cu7 S4 @CuCo2 O4 Yolk-Shell Microspheres Composite and Elucidation of Its Enhanced Photocatalytic Activity, Mechanism, and Pathway for Carbamazepine Degradation

Water pollution caused by the massive use of medicines has caused significant environmental problems. This work first reports the synthesis and characterization of the Cu₇ S₄ /CuCo₂ O₄ (CS/CCO) yolk-shell microspheres via hydrothermal and annealing methods, and then investigates their photocatalytic performance in removing organic water pollutants. The 10-CS/CCO composite with yolk-shell microspheres exhibits the highest photodegradation rate of carbamazepine (CBZ), reaching 96.3% within 2 h. The 10-CS/CCO also demonstrates more than two times higher photodegradation rates than the pure (Cu₇ S₄ ) CS and (CuCo₂ O₄ ) CCO. This outstanding photocatalytic performance can be attributed to the unique yolk-shell structure and the Z-scheme charge transfer pathway, reducing multiple reflections of the acting light. These factors enhance the light absorption efficiency and efficiently transfer photoexcited charge carriers. In-depth, photocatalytic degradation pathways of CBZ are systematically evaluated via the identification of degradation intermediates with Fukui index calculation. The insights gained from this work can serve as a guideline for developing low-cost and efficient Z-scheme photocatalyst composites with the yolk-shell structure.

Synthesis and applications of graphitic carbon nitride (g-C3N4) based membranes for wastewater treatment: A critical review

Semiconducting membrane combined with nanomaterials is an auspicious combination that may successfully eliminate diverse waste products from water while consuming little energy and reducing pollution. Creating an inexpensive, steady, flexible, and diversified business material for membrane production is a critical challenge in membrane technology development. Because of its unusual structure and high catalytic activity, graphitic carbon nitride (g-C3N4) has come out as a viable material for membranes. Furthermore, their great durability, high permanency under challenging environments, and long-term use without decrease in flux are significant advantages. The advanced material techniques used to manage the molecular assembly of g-C3N4 for separation membrane were detailed in this review work. The progress in using g-C3N4-based membranes for water treatment has been detailed in this presentation. The review delivers an updated description of g-C3N4 based membranes and their separation functions and new ideas for future enhancements/adjustments to address their weaknesses in real-world situations. Finally, the ongoing problems and promising future research directions for g-C3N4-based membranes are discussed.

Inactivation of E. coli and Streptococcus agalactiae by UV/persulfate during marine aquaculture disinfection

Sulfate radical (•SO₄^-)-based advanced oxidation processes have attracted a great deal of attention for use in water disinfection because of their strong oxidation ability toward electron-rich moieties on microorganism molecules. However, a few studies have focused on the effects of •SO₄^- on pathogenic microorganism inactivation in marine aquaculture water containing various inorganic anions. We employed the gram-negative bacteria E. coli and gram-positive bacteria S. agalactiae as representatives to evaluate the application of UV/persulfate (S₂O₈^2-, PDS), to the disinfection of marine aquaculture water in a comprehensive manner. Total inactivation of 4.13ˍlog of E. coli cells and 4.74ˍlog of S. agalactiae cells was reached within 120 s in the UV/PDS system. The inactivation of pathogenic bacteria in marine aquaculture water increased with the increasing PDS concentration and UV intensity. An acidic pH was beneficial for UV/PDS inactivation. Halogen-free radicals showed a strong influence on the inactivation. Anions in seawater, including Cl^-, Br^-, and HCO₃^- inhibited the disinfection. The inactivation rates of pathogenic bacteria followed the order seawater < marine aquaculture water < freshwater. Pathogenic bacteria could also be effectively inactivated in actual marine aquaculture water and reservoir water. The analysis of the inactivation mechanisms showed that S₂O₈^2- was activated by UV to produce •SO₄^-, which damaged the cell membranes. In addition, antioxidant enzymes, including SOD and CAT, were induced. The genomic DNA was also damaged. Inorganic disinfection byproducts such as chlorate and bromate were not formed during the disinfection of marine aquaculture water, which indicated that UV/PDS was a safe and efficient disinfection method.

A review on graphitic carbon nitride (g-C3N4) based hybrid membranes for water and wastewater treatment

Graphitic carbon nitride (g-C₃N₄) has gained enormous attention for water and wastewater treatment. Compared with g-C₃N₄ nanopowders, g-C₃N₄ based hybrid membranes have demonstrated great potential for its superior practicability. This review outlines the preparation and characterization of g-C₃N₄ based hybrid membranes and presents their representative applications in water and wastewater treatment (e.g., removal of organic dyes, phenolic compounds, pharmaceuticals, salt ions, heavy metals, and oils). Meanwhile, g-C₃N₄ based films for the removal of contaminants through photocatalytic degradation is also summarized. In addition, the corresponding mechanisms and relevant findings are discussed. Finally, the challenges and research needs in the future and application of g-C₃N₄ based hybrid membranes are highlighted.

Zr-MOFs loaded on polyurethane foam by polydopamine for enhanced dye adsorption

Zirconium-based metal-organic frameworks (Zr-MOFs) have attracted widespread attention due to their high specific surface area, high porosity, abundant metal active sites and excellent hydrothermal stability. However, Zr-MOFs materials are mostly powdery in nature and thus difficult to separate from aqueous media, which limits their application in wastewater treatment. In this study, PDA/Zr-MOFs/PU foam was constructed by growing Zr-MOFs nanoparticles on a dopamine-modified polyurethane foam substrate by in-situ hydrothermal synthesis as an adsorbent for removing dyes from wastewater. The results demonstrated that the polydopamine coating improves the dispersion of the Zr-MOFs nanoparticles on the substrate and enhances the interaction between the Zr-MOFs nanoparticles and the PU foam substrate. As a result, compared with Zr-MOFs/PU foam, the prepared PDA/Zr-MOFs/PU foam exhibits higher adsorption capacity for crystal violet (CV) (63.38 mg/g) and rhodamine B (RB) (67.73 mg/g), with maximum adsorption efficiencies of CV and RB of 98.4% (pH=11) and 93.5% (pH=7), respectively, at a concentration of 10 mg/L. The PDA/Zr-MOFs/PU foam can simultaneously remove CV and RB from the mixed solution. Moreover, the PDA/Zr-MOFs/PU foam still exhibits high stability and reusability after five cycles.

Disulfide Cross-Linked Poly(Methacrylic Acid) Iron Oxide Nanoparticles for Efficiently Selective Adsorption of Pb(II) from Aqueous Solutions

The efficient selectivity of heavy metal ions from wastewater is still challenging but gains great public attention in water treatment on a world scale. In this study, the novel disulfide cross-linked poly(methacrylic acid) iron oxide (Fe3O4@S-S/PMAA) nanoparticles with selective adsorption, improved adsorption capability, and economic reusability were designed and prepared for selective adsorption of Pb(II) ions in aqueous solution. In this study, nuclear magnetic resonance, dynamic light scattering, scanning electron microscopy, X-ray diffraction, vibrating sample magnetometry, and thermogravimetric analysis were utilized to study the chemophysical properties of Fe3O4@S-S/PMAA. The effect of different factors on adsorption properties of the Fe3O4@S-S/PMAA nanoparticles for Co(II) and Pb(II) ions in aqueous solution was explored by batch adsorption experiments. For adsorption mechanism investigation, the adsorption of Fe3O4@S-S/PMAA for Co(II) and Pb(II) ions can be better fitted by a pseudo-second-order model, and the adsorption process of Fe3O4@S-S/PMAA for Co(II) and Pb(II) matches well with the Freundlich isotherm equation. Notably, in the adsorption experiments, the Fe3O4@S-S/PMAA nanoparticles were demonstrated to have a maximum adsorption capacity of 48.7 mg·g-1 on Pb(II) ions with a selective adsorption order of Pb2+ > Co2+ > Cd2+ > Ni2+ > Cu2+ > Zn2+ > K+ > Na+ > Mg2+ > Ca2+ in the selective experiments. In the regeneration experiments, the Fe3O4@S-S/PMAA nanoparticles could be easily recovered by desorbing heavy metal ions from the adsorbents with eluents and showed good adsorption capacity for Co(II) and Pb(II) after eight recycles. In brief, compared to other traditional nanoadsorbents, the as-prepared Fe3O4@S-S/PMAA with improved adsorption capability and high regeneration efficiency demonstrated remarkable affinity for adsorption of Pb(II) ions, which will provide a novel technical platform for selective removal of heavy metal ions from actual polluted water.

Preparation of novel chitosan polymeric nanocomposite as an efficient material for the removal of Acid Blue 25 from aqueous environment

A novel, sustainable chitosan polymeric nanocomposite (CS-PVA@CuO) was synthesized and subjected to the removal of acid blue 25 (AB25) from the aqueous environment. The influence of different variables such as p^H, contact time, initial dye concentration, temperature, and adsorption kinetics has been examined in the batch adsorption process. The CS-PVA@CuO composite was systematically characterized by XRD, FTIR, SEM, and EDX analysis. The pseudo-first order (PFO), pseudo-second order (PSO), and intra-particle diffusion kinetics equations were used to examine the kinetic data of the adsorption process. The adsorption kinetics confirms that the PSO model was a more exact fit. Thermodynamics study typically revealed that the uptake of AB25 by the adsorbent is spontaneous and endothermic in nature. Remarkably, the results reveal the highest adsorption capacity of the CS-PVA@CuO was 171.4 mg/g at 313 K. To be specific, CS-PVA@CuO polymer nanocomposite can be effectively used as a suitable adsorbent material for the potential elimination of anionic AB25 dye from the aqueous solutions.

Membrane photo-bioreactor coupled with heterogeneous Fenton fluidized bed for high salinity wastewater treatment: Pollutant removal, photosynthetic bacteria harvest and membrane anti-fouling analysis

In this study, efficient photosynthetic bacteria (PSB)-GO/PVDF membrane photo-bioreactor (MPBR) combined with heterogeneous Fenton fluidized bed was built and successfully applied for treatment of actual refractory seafood-processing wastewater with extremely high salinity. As effective pre-treatment, heterogeneous Fenton was designed for removing non-biodegradable organics and reducing iron-sludge discharge. In MPBR, GO/PVDF membrane fabricated by chemical grafting GO nanosheets was first used for salt-tolerated PSB harvest. Compared with original PVDF membrane, GO/PVDF membrane exhibited enhanced hydrophilicity, better permeability (4.4 times) and attractive flux recover rate (94%), which was attributed to remarkable reduction in hydrophobic proteins amount of extracellular polymeric substances (EPS). Importantly, COD and NH₃-N removal efficiency of MPBR with GO/PVDF membrane were kept about 95 and 98%, respectively, and average biomass productivity reached as high as 105 mg/L·d. This study provides a promising and economical way to build efficient MBR combined with new materials for high salinity hazardous wastewater treatment.

Comparative study of persulfate oxidants promoted photocatalytic fuel cell performance: Simultaneous dye removal and electricity generation

Introducing peroxymonosulfate (PMS) and peroxydisulfate (PDS) into the photocatalytic fuel cell (PFC) system were investigated by comparing the Reactive Brilliant Blue (KN-R) degradation and synchronous electricity production. The two persulfates (PS) themselves are strong oxidant, and could be activated and as electron sacrificial agent in the PFCs, facilitating the photoelectrocatalysis and expanding redox to the entire cell space. Hence, the two established PFC/PS systems manifested prominent cell performances, enhancing the KN-R decomposition and electric power production relative to the virgin PFC. Thereinto, the KN-R removal rate of PFC/PMS was faster than that of PFC/PDS, but an opposite trend appeared in the electricity generation. Besides, the cell performances of the two cooperative systems were evaluated at different operation conditions, including PS dosage, solution pH, and irradiation strength. Moreover, the dye elimination principle was explored by radicals scavenging experiment, and the consequence revealed that hydroxyl radical (HO^•), sulfate radical (SO₄^•-) and singlet oxygen were chief active species in the PFC/PMS, and HO^•, SO₄^•- and superoxide anion played the key roles in the PFC/PDS. Furthermore, the calculated economic indicator demonstrated that the economy of the two synergistic processes were greater than that of UV/PS and solo PFC, and the PFC/PDS was more cost-effective than PFC/PMS.

Novel hybrid treatments of textile wastewater by membrane oxidation reactor: Performance investigations, optimizations and efficiency comparisons

Feasible reclamation of industrial wastewaters by consuming less resource and time requires researchers to develop advanced and sophisticated solutions to meet today's versatile needs. In this respect, novel technological applications of hybrid membrane oxidation reactor (MOR) comprising of the Fenton or photo-Fenton enhanced ultrafiltration (FEUF and pFEUF), was demonstrated for treating textile washing wastewater. Their comparative hybrid performances were explored based on response surface analyses of Taguchi experimental designs that were optimized for maximized responses at minimum oxidant and acid consumptions. From eleven specific variables, those affecting the hybrid treatment performances at significant levels were found as H₂O₂ amount, process time, membrane type, Fe²⁺ concentration and temperature. The pFEUF treatment showed better and faster organics removal efficiency than by FEUF, and the UF process was seen to be more affected from changing operational conditions in pFEUF. Organic pollutants were oxidized by 56.6 ± 8.7% degradation and 31.5 ± 3.2% mineralization, while UF allowed a synergistic contribution to the hybrid MOR performance by 38.1 ± 4.7% and 17.3 ± 3.1%, respectively. Compared to simultaneous MOR and external UF after Fenton, sequential MOR was found as the best solution by an efficiency of 84.5% COD, 70.5% TOC, and 155.6 L/m²·h. The effluents could be readily produced with quality suitable for directly discharging to the sewage infrastructure system resulting in a complete treatment. This study proved that the developed MOR techniques are technologically favorable for the treatment of industrial organic wastewaters due to high treatment performances and less resource, time and land needs. It can be finally declared that they can be used as rather attractive solutions for not only wastewater reclamation but also water recovery by further handling of their effluents.

Formation of disinfection byproducts from sulfamethoxazole during sodium hypochlorite disinfection of marine culture water

The fates of the antibiotic sulfamethoxazole (SMX) in the chlorination of fresh water, simulated brackish marine culture water, and marine water were investigated. SMX was oxidized by sodium hypochlorite (NaClO) at different reaction rates in the different samples. The oxidation of SMX followed pseudo-first-order kinetics, and the rate constant was the largest in marine water (3.44 min^-1), as Br^- ions promote the oxidation reaction. Moreover, the kinds of disinfection byproducts (DBPs) were also affected by Br^- ions. Br-DBPs were found in the simulated brackish marine culture water and marine water disinfection systems. The structures of the DBPs indicated that S-C cleavage, polymerization, S-N hydrolysis, chlorine/bromine substitution, and desulfonation reactions occurred on SMX during the disinfection process. EPI (Estimation Programs Interface) Suite™ and absorbable organic halogen (AOX) analysis were used to evaluate the toxicity of the DBPs. The results suggested that DBPs in the simulated brackish marine culture water and marine water systems were more toxic than those in the fresh water system.

Characterization and differentiation of the adsorption behavior of crystal violet and methylene blue at the silica/water interface using near field evanescent wave

Different molecular structures lead to different adsorption performances. In this work, the adsorption behavior of two organic dyes, namely, crystal violet (CV, triphenylmethane dye of symmetric structure) and methylene blue (MB, azo dye of linear structure), were investigated, characterized and differentiated at the silica/water interface using the total internal reflection induced near field evanescent wave (TIR-NFEW) platform. According to the change in the evanescent wave intensity and following Beer's law, the adsorption behaviors of CV and MB can be monitored real time and sensitively. On one hand, the Langmuir adsorption model was applied to obtain the related thermodynamic data (including adsorption equilibrium constant (Kads) and adsorption free energy (ΔG)). With ΔG(MB) = -25.7 ± 1.7 kJ mol-1 < ΔG(CV) = -21.5 ± 0.6 kJ mol-1 < 0, the linear MB showed a higher spontaneous adsorption ability than the symmetric CV at the silica/water interface. On the other hand, a two-step adsorption kinetic model was applied to obtain the dynamics data including the linear adsorption rate constant (k1) and the exponential adsorption rate constant (k2). With k1(CV) < k1(MB) and k2(CV) ≈ k2(MB), MB diffused faster than CV at the first diffusion step but had nearly the same interaction speed as CV in the second adsorption step. A molecular-aligned-mechanism was successfully proposed to describe the interfacial interaction process for both CV and MB that includes molecular reactions involving electrostatic attraction of type I SiO- and H-bonds of type II SiOH. This work provides new insights into the molecular-level interpretation of the adsorption of the azo and triphenylmethane dyes at the silica-water interface.

Real-time measurement of the crystal violet adsorption behavior and interaction process at the silica-aqueous interface by near-field evanescent wave

The interfacial adsorption and interaction of crystal violet (CV) at the silica-water interface was real-time measured based on a total-internal-reflection-induced near-field evanescent wave (TIR-NFEW). A silica optical fiber (SOF) was employed as a charged substrate for CV adsorption and as a light transmission waveguide for evanescent wave production for the investigation system. According to the change of evanescent wave intensity, the CV adsorption behavior could be real-time monitored at the silica-aqueous interface. The Langmuir adsorption model and two kinetic models were applied to obtain the related thermodynamic and kinetic data, including the adsorption equilibrium constant (Kads) of (5.9 ± 1.5) × 104 M-1 and adsorption free energy (ΔG) of -21.6 ± 0.6 kJ mol-1. Meanwhile, this method was shown to be able to isolate the elementary processes of adsorption and desorption under steady-state conditions, and gave an adsorption rate constant (ka) and desorption rate constant (kd) of 2089 ± 6.96 M min-1 and 0.35 ± 0.0012 min-1 for a 15 rpm flow rate. The surface interaction process was revealed and the adsorption mechanism proposed by a molecular orientation adsorption model with three-stage-concentration, indicating that CV first adsorbed on Si-O- sites through electrostatic attraction, then on Si-OH sites through hydrogen bonding, and lastly on the surface through van der Waals forces with different CV concentrations. This study can provide a molecular-level interpretation of CV adsorption and provides important insights into how CV adsorption can be controlled at the silica-water interface.

Real-Time Monitoring of Azo Dye Interfacial Adsorption at Silica-Water Interface by Total Internal Reflection-Induced Surface Evanescent Wave

An interface research method based on total internal reflection induced evanescent wave (TIR-EW) is developed to monitor the adsorption behavior of azo dye at the silica-water interface. The monitoring system is constructed by employing silica optical fiber (SOF) as both charged substrate for dye adsorption and light transmission waveguide for evanescent wave production. According to the change of evanescent wave intensity and followed by Beer's law, the methylene blue (MB) adsorption behavior can be real-time monitored at the silica-water interface. Langmuir adsorption model and pseudo-first-order model are applied to obtain the related thermodynamic and kinetic data. The adsorption equilibrium constant ( K_ads) and adsorption free energy (Δ G) of MB at the silica-water interface are determined to be (3.3 ± 0.5) × 10⁴ M^-1 and -25.7 ± 1.7 kJ mol^-1. Meanwhile, this method is highlighted to isolate elementary processes of adsorption and desorption under steady-state conditions, and gives adsorption rate constant ( k_a) and desorption rate constant ( k_d) of 8585 ± 19.8 min^-1 and 0.26 ± 0.0006 min^-1 for 15 r/min flow rate. The surface interaction process is revealed and adsorption mechanism is proposed, indicating MB first adsorbed on Si-O^- sites through electrostatic attraction and then on Si-OH sites through hydrogen bond with increasing MB concentrations. Our findings from this study provided molecular-level interpretation of azo dye adsorption at silica-water interface, and the results provide important insight into how MB adsorption can be controlled at the interface.

Study on degrading graphene oxide in wastewater under different conditions for developing an efficient and economical degradation method

With popular application of graphene and graphene oxide (GO), they have been discharged into water. Graphene and GO harm organisms. However, an efficient and economical method for removing graphene and GO in wastewater has seldom been reported. Graphene can be oxidized by hydrogen peroxide to give GO; therefore, degradation of graphene oxide is an important step in the procedure of removal of graphene from water. In this paper, GO degradation via photo-Fenton reaction under different conditions was carried out. Experimental results suggested that GO in wastewater can be efficiently and economically degraded into carbon dioxide and H₂O when pH value is 3, concentration of H₂O₂ and FeCl₃ are 35 mM and 5 ppm, respectively. Degradation mechanism of GO was suggested based on UV-vis absorption spectra, scanning electron microscopy, X-ray diffraction and liquid chromatography-mass spectra data of degradation intermediates. This paper suggests an efficient and economical degradation way of GO in wastewater.

Corrugated stainless-steel mesh as a simple engineerable electrode module in bio-electrochemical system: Hydrodynamics and the effects on decolorization performance

The application of bio-electrochemical system (BESs) is strongly depended on the development of the engineering applicable electrode. Here we described an economical and readily processable electrode module with three-dimensional structure, the corrugated stainless-steel mesh electrode module (c-SMEM). This novel developed electrode module was demonstrated to provide a good hydrodynamic characteristic and significantly enhanced the decolorization performance of the BES when serving for treating azo dye (acid orange 7, AO7) containing wastewater. Compared to the conventional planar electrodes module (p-SMEM), c-SMEM was found to prolong the mean residence time (MRT_θ) of AO7 and change the flow pattern closer to the plug flow. As a result, the maximum enhancement of the volumetric decolorization rate (vDR) can reach to 255%, even when the c-SMEM and p-SMEM have the same electrode surface area. In addition, a techno-economic analysis model was established to elucidated the effects of the decolorization performance and the material cost on the initial capital cost, which revealed the BES with c-SMEM could be economically comparable to or even better than the traditional bio-decolorization technologies. These results suggest c-SMEM holds great potential for engineering application, which may help paving the way of applying BES at large-scale.

Oxidation of the antibacterial agent norfloxacin during sodium hypochlorite disinfection of marine culture water

Chlorination disinfection and antibiotic addition are two universal processes of marine culture. The generation of disinfection byproducts (DBPs) is unavoidable. Antibiotic residue not only pollutes water but also acts as a precursor to the production of new DBPs. The fate of antibiotic norfloxacin (NOR) in chlorination disinfection was investigated. It was observed that NOR could be oxidized by disinfection agent sodium hypochlorite, but the oxidation rate varied considerably with the type of disinfected water. For fresh water, marine culture water and sea water, the reaction rate constant was 0.066 min^-1, 0.466 min^-1 and 1.241 min^-1, respectively. The difference was primarily attributed to the promotion role of bromide ions in seawater and marine culture water. Moreover, the bromide ions could result in the generation of brominated DBPs (Br-DBPs). The kinetics, products, reaction centers and mechanisms were investigated. The active site of NOR was found to be the N4 atom on piperazinyl in fresh water. During marine culture water and sea water disinfection, the carboxyl on NOR was oxidized and two Br-DBPs were formed. This was attributed to the lowering of the reaction's required activation energy when performed in the presence of bromide ions. The Br-DBPs were also confirmed in real shrimp pond brackish water. Quantitative structure activity relationships and the total organic halogen analysis showed that the DBPs in marine culture water possessed stronger toxicological properties than the DBPs in fresh water. The toxicity increase was attributed to the production of Br-DBPs in the disinfection process of marine culture water.

Selective Fenton-like oxidation of methylene blue on modified Fe-zeolites prepared via molecular imprinting technique

A facile strategy to increase the selectivity of heterogeneous Fenton oxidation is investigated. The increase was reached by increasing selective adsorption of heterogeneous Fenton catalyst to a target pollutant. The heterogeneous Fenton catalyst was prepared by a two-step process. First, zeolite particles were imprinted by the target pollutant, methylene blue (MB), in their aggregations, and second, iron ions were loaded on the zeolite aggregations to form the molecule imprinted Fe-zeolites (MI-FZ) Fenton catalyst. Its adsorption amount for MB reached as high as 44.6 mg g^-1 while the adsorption amount of un-imprinted Fe-zeolites (FZ) is only 15.6 mg g^-1. Fenton removal efficiency of MI-FZ for MB was 87.7%, being 33.9% higher than that of FZ. The selective Fenton oxidation of MI-FZ for MB was further confirmed by its removal performance for the mixed MB and bisphenol A (BPA) in solution. The removal efficiency of MB was 44.7% while that of BPA was only 14.9%. This fact shows that molecular imprinting is suitable to prepare the Fe-zeolites (FZ)-based Fenton catalyst with high selectivity for removal of target pollutants, at least MB.

Combination of Fenton processes and biotreatment for wastewater treatment and soil remediation

There is a continuously increasing worldwide concern for the development of wastewater and contaminated soil treatment technologies. Fenton processes and biological treatments have long been used as common technologies for treating wastewater and polluted soil but they still need to be modified because of some defects (high costs of Fenton process and long remediation time of biotreatments). This work first briefly introduced the Fenton technology and biotreatment, and then discussed the main considerations in the construction of a combined system. This review shows a critical overview of recent researches combining Fenton processes (as pre-treatment or post-treatment) with bioremediation for treatment of wastewater or polluted soil. We concluded that the combined treatment can be regarded as a novel and competitive technology. Furthermore, the outlook for potential applications of this combination in different polluted soil and wastewater, as well as the mechanism of combination was also discussed.

Conversion of Fe-rich waste sludge into nano-flake Fe-SC hybrid Fenton-like catalyst for degradation of AOII

Permanently increasing in the amount of sludge resulted in the serious environment burden. This work reports a novel carbothermal process for converting the Fe-rich waste sludge into cleaner nano-flake Fenton-like catalyst to relieve the crisis. The transformation of Fe species at different carbothermal temperature was evaluated by XRD analysis. SEM and XPS analyses were involved to characterize the morphology and chemical bonds of the catalysts. Results shown that the resulted catalyst carbonized at 800 °C (Fe-SC-800) was composed of Fe(0) and Fe3O4, performing nano-flake-like structure. The Fe-SC-800 has the highest catalytic activity in degradation of AOII in C0 = 200 mg/L. The efficiency achieves at 98% within 30 min at neutral pH, which is ascribed to the hydroxyl radical oxidation. Moreover, no iron is leached and the Fe-SC-800 could be recycled for three times at least. Thus, the Fe rich sludge could be reutilized as a valuable source for eco-friendly catalyst production, constituting an ecological way to manage these sludge wastes and eliminate the sludge and organic pollution to environment.

Efficient photocatalytic degradation of tetracycline hydrochloride by Ag3PO4 under visible-light irradiation

A facile, environmental-friendly Ag3PO4-PN photocatalyst was synthesized by a simple precipitation method at room temperature in the presence of ammonia and polyvinyl pyrrolidone (PVP). As-synthesized samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV-visible diffuse reflectance spectroscopy (UV-vis DRS). The enhancement of photocatalytic efficiency of Ag3PO4-PN is strongly dependent on the excellent photo-absorption capacity, sharp edges and corners, and synergistic effect of PVP and NH3·H2O. The effects of catalyst dosage, TC concentration and solution pH were explored with tetracycline hydrochloride (TC) as target contamination. The mineralization was evaluated by total organic carbon (TOC) analysis and determination of the concentration of inorganic ions such as NO3 (-) and Cl(-). Radical detection experiment indicated the h(+) and ·O(2-) are major active species in the degradation of TC by Ag3PO4-PN. Moreover, photocatalyst stability and regeneration experiments exhibited the favorable stability and rejuvenation ability, suggesting a promising prospect of practical application of Ag3PO4 in the wastewater treatment.

An efficient and environment-friendly method of removing graphene oxide in wastewater and its degradation mechanisms

Graphene and graphene oxide (GO) have already existed in air, water and soil due to their popular application in functional materials. However, degradation of graphene and GO in wastewater has not been reported. Degradation of GO plays a key role in the elimination of graphene and GO in wastewater due to graphene being easily oxidized to GO. In this paper, GO was completely degraded to give CO2 by Photo-Fenton. The degradation intermediates were determined by UV-vis absorption spectra, elemental analysis (EA), fourier transform infrared (FT-IR) and liquid chromatography-mass spectrometry (LC-MS). Experimental results showed that graphene oxide was completely degraded to give CO2 after 28 days. Based on UV, FT-IR, LC-MS spectra and EA data of these degradation intermediates, the degradation mechanisms of GO were supposed. This paper suggests an efficient and environment-friendly method to degrade GO and graphene.

Efficient visible-light photocatalytic degradation of sulfadiazine sodium with hierarchical Bi₇O₉I₃under solar irradiation

Bi₇O₉I₃, a kind of visible-light-responsive photocatalyst, with hierarchical micro/nano-architecture was successfully synthesized by oil-bath heating method, with ethylene glycol as solvent, and applied to degrade sulfonamide antibiotics. The as-prepared product was characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflection spectra and scanning electron microscopy (SEM). XRD and XPS tests confirmed that the product was indeed Bi₇O₉I₃. The result of SEM observation shows that the as-synthesized Bi₇O₉I₃ consists of a large number of micro-sheets with parallel rectangle structure. The optical test exhibited strong photoabsorption in visible light irradiation, with 617 nm of absorption edges. Moreover, the difference in the photocatalytic efficiency of as-prepared Bi₇O₉I₃ at different seasons of a whole year was investigated in this study. The chemical oxygen demand removal efficiency and concentration of NO(3)(-) and SO(4)(2-) of solution after reaction were also researched to confirm whether degradation of the pollutant was complete; the results indicated a high mineralization capacity of Bi₇O₉I₃. The as-synthesized Bi₇O₉I₃exhibits an excellent oxidizing capacity of sulfadiazine sodium and favorable stability during the photocatalytic reaction.

Self-template synthesis of hierarchical magnetic porous carbon fibers derived from Fe(BTC)-coated bamboo fibers for fast removal of methylene blue

Hierarchical magnetic porous carbon fibers (MBFs) were fabricated by annealing Fe(BTC)-coated bamboo fibers, which were produced using a new synthesis route for growing Fe(BTC) on bamboo fiber materials in nitrogen atmosphere.