Reductive dechlorination of octachlorodibenzo-p-dioxin by nanosized zero-valent zinc: modeling of rate kinetics and congener profile

Nanotechnologies for environmental remediation and their ecotoxicological impacts

Environmental nanoremediation is an emerging technology that aims to rapidly and efficiently remove contaminants from the polluted sites using engineered nanomaterials (ENMs). Inorganic nanoparticles which are generally metallic, silica-based, carbon-based, or polymeric in nature serve to remediate through chemical reactions, filtration, or adsorption. Their greater surface area per unit mass and high reactivity enable them to treat groundwater, wastewater, oilfields, and toxic industrial contaminants. Despite the growing interest in nanotechnological solutions for bioremediation, the environmental and human hazard associated with their use is raising concerns globally. Nanoremediation techniques when compared to conventional remediation solutions show increased effectivity in terms of cost and time; however, the main challenge is the ability of ENMs to remove contaminants from different environmental mediums by safeguarding the ecosystem. ENMs improving the accretion of the pollutant and increasing their bioavailability should be rectified along with the vigilant management of their transfer to the upper levels of the food chain which subsequently causes biomagnification. The ecosystem-centered approach will help monitor the ecotoxicological impacts of nanoremediation considering the safety, sustainability, and proper disposal of ENMs. The environment and human health risk assessment of each novel engineered nanomaterial along with the regulation of life cycle assessment (LCA) tools of ENMs for nanoremediation can help investigate the possible environmental hazard. This review focuses on the currently available nanotechnological methods used for environmental remediation and their potential toxicological impacts on the ecosystem.

Advanced implications of nanotechnology in disease control and environmental perspectives

Nanotechnology encompasses a wide range of devices derived from biology, engineering, chemistry, and physics, and this scientific field is composed of great collaboration among researchers from several fields. It has diverse implications notably smart sensing technologies, effective disease diagnosis, and sometimes used in treatment. In medical science, the implications of nanotechnology include the development of elements and devices that interact with the body at subcellular (i.e., molecular) levels exhibiting high sensitivity and specificity. There is a plethora of new chances for medical science and disease treatment to be discovered and exploited in the rapidly developing field of nanotechnology. In different sectors, nanomaterials are used just because of their special characteristics. Their large surface area of them enables higher reactivity with greater efficiency. Furthermore, special surface chemistry is displayed by nanomaterials which compare to conventional materials and facilitate the nanomaterials to decrease pollutants efficiently. Recently, nanomaterials are used in some countries to reduce the levels of contaminants in water, air, and soil. Moreover, nanomaterials are used in the cosmetics and medical industry, and it develops the drug discovery (DD) system. Among a huge number of nanomaterials, Cu, Ag, TiO₂, ZnO, Fe₃O₄, and carbon nanotubes (CNTs) are extensively used in different industries for various purposes. This extensive review study has introduced the major scientific and technical features of nanotechnology, as well as some possible clinical applications and positive feedback in environmental waste management and drug delivery systems.

Applications of Green Synthesized Nanomaterials in Water Remediation

Water is the most important component on the earth for living organisms. With industrial development, population increase and climate change, water pollution becomes a critical issue around the world. Its contamination with different types of pollutants created naturally or due to anthropogenic activities has become the most concerned global environmental issue. These contaminations destroy the quality of water and become harmful to living organisms. A number of physical, chemical and biological techniques have been used for the purification of water, but they suffer in one or the other respect. The development of nanomaterials and nanotechnology has provided a better path for the purification of water. Compared to conventional methods using activated carbon, nanomaterials offer a better and economical approach for water remediation. Different types of nanomaterials acting as nanocatalysts, nanosorbents, nanostructured catalytic membranes, bioactive nanoparticles, nanomembranes and nanoparticles provide an alternative and efficient methodology in solving water pollution problems. However, the major issue with nanomaterials synthesized in a conventional way is their toxicity. In recent days, a considerable amount of research is being carried out on the synthesis of nanomaterials using green routes. Nanomaterials synthesized by using the green method are now being used in different technologies, including water remediation. The remediation of water by using nanomaterials synthesized by the green method has been reviewed and discussed in this paper.

Highly improved dechlorination of 2,4-dichlorophenol in aqueous solution by Fe/Ni nanoparticles supported by polystyrene resin

2,4-dichlorophenol (2,4-DCP) is a typical chlorophenol that has been widely used in industrial production and caused serious pollution to the environment. In this study, the performance of Fe/Ni bimetallic nanoparticles supported on polystyrene cation exchange resin (Fe/Ni-D072) to remove 2,4-DCP was evaluated. The effects including the doping amount of Ni, the dosage of Fe/Ni-DCP, the initial concentration of 2,4-DCP, and pH value of the solution on the removal efficiency were also investigated. The results showed that when the initial concentration of 2,4-DCP was 20 mg/L and pH = 7.3, 90% of 2,4-DCP could be dechlorinated by Fe/Ni-D072 (Ni% = 30 wt%, dosage: 6.7 g/L) after 12 h reaction. The dechlorination process followed a pseudo-first-order model, and the reaction constant was 0.252 h^-1. In addition, the effects of humic acid and common coexisting ions on dechlorination were studied. The results showed that humic acid with a low concentration (5 mg/L) and CO₃^2- restrained the degradation of 2,4-DCP. The dechlorination products of 2,4-DCP were identified by HPLC and the result showed phenol was the main product with a slight amount of 2-CP as the dechlorination intermediate, and 4-CP was barely detected. These results suggest that Fe/Ni-D072 was a promising catalytic material for the removal of chlorophenol and has great application prospects in groundwater remediation.

Quantifying the efficiency and selectivity of organohalide dechlorination by zerovalent iron

The efficiency and selectivity of zerovalent iron-based treatments for organohalide contaminated groundwater can be quantified by accounting for redistribution of electrons derived from oxidation of Fe⁰. Several types of efficiency are reviewed, including (i) the efficiency of Fe(0) utilization, ε_Fe(0), (ii) the electron efficiency of target contaminant reduction, ε_e, and (iii) the electron efficiency of natural reductant demand (NRD) involving H₂O, O₂, and co-contaminants such as nitrate, ε_NRD. Selectivity can then be calculated by using ε_e/ε_NRD. Of particular interest is ε_e and the key to its determination is measuring the total quantity of electrons provided by Fe⁰ oxidation, which can be based on either the loss of Fe(0), the formation of Fe(ii)/Fe(iii), or the composition of the total reaction products. Recently, many data have accumulated on ε_e for the treatment of various chlorinated solvents (esp. trichloroethylene, TCE) by zerovalent iron (ZVI), and analysis of these data shows that ZVI particle properties (e.g., stabilization with polymers, bimetallic modification, sulfidation, etc.) and other operational factors have variable effects on ε_e. Of particular interest is that pre-exposure of ZVI to reduced sulfur species (i.e., sulfidation) consistently improves the ε_e of contaminant reduction, mainly by suppressing the reduction of water.

Nanomaterials for the Removal of Heavy Metals from Wastewater

Removal of contaminants in wastewater, such as heavy metals, has become a severe problem in the world. Numerous technologies have been developed to deal with this problem. As an emerging technology, nanotechnology has been gaining increasing interest and many nanomaterials have been developed to remove heavy metals from polluted water, due to their excellent features resulting from the nanometer effect. In this work, novel nanomaterials, including carbon-based nanomaterials, zero-valent metal, metal-oxide based nanomaterials, and nanocomposites, and their applications for the removal of heavy metal ions from wastewater were systematically reviewed. Their efficiency, limitations, and advantages were compared and discussed. Furthermore, the promising perspective of nanomaterials in environmental applications was also discussed and potential directions for future work were suggested.

Degradation of polychlorinated dibenzo-p-dioxins and dibenzofurans in real-field soil by an integrated visible-light photocatalysis and solvent migration system with p-n heterojunction BiVO4/Bi2O3

Degradation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in real-field soil was conducted using an integrated photocatalysis-solvent migration system of BiVO₄/Bi₂O₃ and n-hexane. The photocatalyst BiVO₄/Bi₂O₃ was synthesized, and its performance was found to be affected by the BiVO₄ content, with 20wt% BiVO₄ showing the best performance owing to its p-n heterojunction being well formed. Migration was affected by the amount of n-hexane, with 15% n-hexane giving the most effective transportation of PCDD/Fs. 37.2% of 17 PCDD/Fs was removed in 60h by the integrated photocatalysis-solvent migration system, although the reaction zone covered 8.5% of the volume of the soil. The result showed that migration via n-hexane fulfilled the aim of carrying contaminants from inside of the soil to the surface. Electron-scavenging experiments with BiVO₄/Bi₂O₃ showed an 18.4% of performance in removal compared to no-scavenging condition, which showed that the main reactions driving BiVO₄/Bi₂O₃ visible-light photocatalysis for aryl-chloride were found to be reduction-based. Owing to the hindering effect of Cl atoms, degradation by hydroxyl radical could proceed after initial dechlorination. This study establishes the applicability of integrated photocatalysis-solvent migration systems in real-field settings, and is the first report of a visible-light photocatalyst, BiVO₄/Bi₂O₃, for the degradation of PCDD/Fs in soil.

Comparison of the impacts of zinc ions and zinc nanoparticles on nitrifying microbial community

To understand the effects of metal ions and nanoparticles (NPs) on nitrifying bacterial communities, this study investigates the impacts of zinc (Zn) NPs, zinc oxide (ZnO) NPs and Zn ions on the nitrifying bacterial communities. Under low Zn concentration (0.1mgL^-1), the nitrification rate was promoted by Zn ions and inhibited by the two NPs, indicating that the toxicity of NPs was caused by the NPs themselves instead of the released Zn ions. Further analysis showed that both Zn NPs and ZnO NPs could result in substantial reactive oxygen species (ROS) production in the nitrifying bacteria community. The inhibition was strongly correlated with amoA gene expression, but not with the expression of hao and nxrA genes. These results indicated that the main difference of the Zn ions and Zn NPs on nitrifying bacterial community could be due to the different impacts on the ROS production and amoA gene expression. Collectively, the findings in this study advanced understanding of the different effects of Zn NPs, ZnO NPs and Zn ions on nitrifying bacteria.

Considerations on the mechanism of Ca/ethanol/Pd/C assisted hydrodechlorination of chlorinated aromatic substrates

In order to elucidate the metal-alcohol hydrodechlorination reaction mechanism, several experiments using chloroanisoles as substrates were performed. Thus, chloroanisoles were stirred at 60 °C for 2 h with a mixture of Ca, methanol and various reduction catalysts. The use of deuterated methanol and zeta potential experiments offered supplementary informations, pointing toward a probable radicalic mechanism that occurs on Ca and Pd/C surfaces.

Dehalogenation of persistent halogenated organic compounds: A review of computational studies and quantitative structure-property relationships

Dehalogenation is one of the highly important degradation reactions for halogenated organic compounds (HOCs) in the environment, which is also being developed as a potential type of the remediation technologies. In combination with the experimental results, intensive efforts have recently been devoted to the development of efficient theoretical methodologies (e.g. multi-scale simulation) to investigate the mechanisms for dehalogenation of HOCs. This review summarizes the structural characteristics of neutral molecules, anionic species and excited states of HOCs as well as their adsorption behavior on the surface of graphene and the Fe cluster. It discusses the key physiochemical properties (e.g. frontier orbital energies and thermodynamic properties) calculated at various levels of theory (e.g. semiempirical, ab initio, density functional theory (DFT) and the periodic DFT) as well as their connections to the reactivity and reaction pathway for the dehalogenation. This paper also reviews the advances in the linear and nonlinear quantitative structure-property relationship models for the dehalogenation kinetics of HOCs and in the mathematical modeling of the dehalogenation processes. Furthermore, prospects of further expansion and exploration of the current research fields are described in this article.

Synthesis and use of bimetals and bimetal oxides in contaminants removal from water: a review

This paper gives an overview of the recent advances of the synthesis methods of bimetals and bimetal oxides and applying them in contaminant removal from water.