Behaviour of fullerenes (C60) in the terrestrial environment: potential release from biosolids-amended soils

Cotransport of fullerene nanoparticles and montmorillonite colloids in porous media: Critical role of divalent cations of montmorillonite

While the cotransport of carbon nanoparticles (CNPs) and clay colloids in porous media has been widely studied, the influence of the cation exchange capacity (CEC) of clay colloids on the transport process remains unclear. In this study, batch adsorption and column transport experiments were conducted to investigate the fate and transport of CNPs and clay colloids in quartz sand, with respect to the effect of monovalent-cation exchange capacity (mono-CEC), divalent-cation exchange capacity (di-CEC) and total CEC of clays. Fullerene nanoparticles (nC60) and six types of montmorillonite (ML) with different CEC were selected as modeled CNPs and clay colloids, respectively. Transport behavior of nC60 and ML was characterized using breakthrough curves (BTCs) and fitted with two-kinetic-sites colloid transport model. Results of the adsorption experiments showed a good linear correlation between the deposition of nC60 on the sand surface and the di-CEC of ML. Transport of ML and nC60 was inhibited by each other. The calculated mass recovery of nC60, as well as the fitted maximum deposition capacity and attachment rate coefficients of nC60 exhibited a strong linear relationship with the di-CEC of ML. These results indicate that divalent cations in ML interlayers play a significant role in aggregation between nC60 and ML and their cotransport. Through measurements of the particle size and zeta potentials of sole nC60 and mixtures of ML and nC60, FTIR and XPS analysis of nC60 under different conditions, and a release experiment of nC60 in a sand column, it demonstrated cation bridging (Ca2+-π) between nC60 and ML mediated by the divalent cations in ML interlayers. The study highlighted the potential of using di-CEC of clays as an indicator to predict the mobility of nC60 in clay-containing porous media and added insights to the transport behavior of CNPs in porous media.

Insights on the Dynamics and Toxicity of Nanoparticles in Environmental Matrices

The manufacturing rate of nanoparticles (10–100 nm) is steadily increasing due to their extensive applications in the fabrication of nanoproducts related to pharmaceuticals, cosmetics, medical devices, paints and pigments, energy storage etc. An increase in research related to nanotechnology is also a cause for the production and disposal of nanomaterials at the lab scale. As a result, contamination of environmental matrices with nanoparticles becomes inevitable, and the understanding of the risk of nanoecotoxicology is getting larger attention. In this context, focusing on the environmental hazards is essential. Hence, this manuscript aims to review the toxic effects of nanoparticles on soil, water, aquatic, and terrestrial organisms. The effects of toxicity on vertebrates, invertebrates, and plants and the source of exposure, environmental and biological dynamics, and the adverse effects of some nanoparticles are discussed.

To inquire the effects of different geometric electrodes on current characteristics of C24 fullerene molecular junction

Two different types of geometric electrode configurations were utilized to form C₂₄ fullerene based molecular junction. The C₂₄ molecule was intercalated in-between gold electrodes with two different shapes viz. knife edge and flat edge and the resultant molecular junctions (MJs) were simulated using nonequilibrium Green's function combined with semiempirical extended Huckel theory (EHT). Different transport parameters, namely projected device density of states, current-voltage curve, differential conductance curve, molecular orbitals, and transmission spectra were investigated at discrete bias voltages to gain insight about the various transport phenomena occurring in these molecular junctions. The results show that when the C₂₄ fullerene is placed in between the flat-edged electrodes, current and conductance are higher in magnitude in comparison to the knife-edged configuration. These deductions give us a new perspective to design advanced molecular devices for electronics applications in the future.

Nanomaterials in the environment: Behavior, fate, bioavailability, and effects-An updated review

The present review covers developments in studies of nanomaterials (NMs) in the environment since our much cited review in 2008. We discuss novel insights into fate and behavior, metrology, transformations, bioavailability, toxicity mechanisms, and environmental impacts, with a focus on terrestrial and aquatic systems. Overall, the findings were that: 1) despite substantial developments, critical gaps remain, in large part due to the lack of analytical, modeling, and field capabilities, and also due to the breadth and complexity of the area; 2) a key knowledge gap is the lack of data on environmental concentrations and dosimetry generally; 3) substantial evidence shows that there are nanospecific effects (different from the effects of both ions and larger particles) on the environment in terms of fate, bioavailability, and toxicity, but this is not consistent for all NMs, species, and relevant processes; 4) a paradigm is emerging that NMs are less toxic than equivalent dissolved materials but more toxic than the corresponding bulk materials; and 5) translation of incompletely understood science into regulation and policy continues to be challenging. There is a developing consensus that NMs may pose a relatively low environmental risk, but because of uncertainty and lack of data in many areas, definitive conclusions cannot be drawn. In addition, this emerging consensus will likely change rapidly with qualitative changes in the technology and increased future discharges. Environ Toxicol Chem 2018;37:2029-2063. © 2018 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC.

Incubation of solid state C60 fullerene under UV irradiation mimicking environmentally relevant conditions

Carbon-based nanomaterials, such as C₆₀ fullerenes, are expected to accumulate in soil due to direct release and deposition from the atmosphere. However, little is known about the environmental fate of these nanoparticles which may be susceptible to photochemical and microbial degradation. In the present work, C₆₀ was incubated for a period of 28 days and irradiated with UVA light. Three experiments were carried out where the fullerenes were either spiked onto a glass surface or added to quartz sand or sandy soil samples. At specific time intervals the samples were extracted and analysed by liquid chromatography coupled to UV or high resolution mass spectrometric (HRMS) detection. The fullerenes were degraded in all the treatments and the decay followed a pseudo-first-order rate law. In absence of a solid matrix, the half-life (t_1⁄2) of the C₆₀ was 13.1 days, with an overall degradation of 45.1% that was accompanied by the formation of functionalized C₆₀-like structures. Furthermore, mass spectrometric analysis highlighted the presence of a large number of transformation products that were not directly related to the irradiation and presented opened cage and oxidized structures. When C₆₀ was spiked into solid matrices the degradation occurred at a faster rate (t_1⁄2 of 4.5 and 0.8 days for quartz sand and sandy soil, respectively). Minor but consistent losses were found in the non-irradiated samples, presumably due to biotic or chemical processes occurring in these samples. The results of this study suggest that light-mediated transformation of the fullerenes will occur in the environment.

Degradation and Microbial Uptake of C60 Fullerols in Contrasting Agricultural Soils

The environmental fate of functionalized carbon nanomaterials (CNM) remains poorly understood. Using ¹³C-labeled nanomaterial we present the results of a study investigating the mineralization and microbial uptake of surface-functionalized C₆₀ (fullerols) in agricultural soils with contrasting properties. Soil microcosms rapidly mineralized fullerol C, as determined by ¹³C-content in the respired CO₂, with higher fullerol mineralization in an organic, clay-rich soil versus a silty, low C soil (∼56.3% vs ∼30.9% fullerol C mineralized over 65 days). By tracking the enriched ¹³C from fullerol into microbial phospholipid fatty acids (PLFA) we also report, for the first time, the incorporation of nanomaterial-derived C into soil microbial biomass, primarily by fungi and Gram-negative bacteria. While more fullerol C was incorporated into PLFA in the organic C-rich soil (0.77% vs 0.19% of PLFA C), this soil incorporated fullerol C into biomass less efficiently than the silty, low C soil (0.13% and 0.84% of assimilated fullerol C, respectively). These results demonstrate that, in contrast to pristine C₆₀, surface functionalized C₆₀ are unlikely to accumulate in surface soils and are readily mineralized by a range of soil microorganisms.

Fate of radiolabeled C60 fullerenes in aged soils

Fullerenes (e.g. C₆₀, C₇₀, etc.) present in soil may undergo changes in its retention with aging. In this study, the partitioning behavior of (¹⁴C)-C₆₀ aged up to 12 weeks was investigated in biosolids-amended soil. Spiked samples were subjected to sequential partitioning using water, methanol, and toluene followed by total combustion of solids; the distribution of ¹⁴C across solvents and matrices were used to provide insights on C₆₀ behavior. In most samples, ¹⁴C only partitioned in toluene with the remaining (non-extractable) activity detected in the solid phase. In all biosolids-amended soil samples, an increase in non-extractable ¹⁴C were observed for those exposed to light (vs dark) with the greatest difference observed in biosolids + sand samples. Possible processes that contribute to the observed ¹⁴C distribution, i.e. retention and potential transformation of C_60, were discussed. Over-all, results suggest that environmental exposure to C₆₀ and potentially transformed C₆₀ species, as a result of their release from soils, is likely to be low.

Analysis of fullerenes in soils samples collected in The Netherlands

Fullerenes are carbon based nanoparticles that may enter the environment as a consequence of both natural processes and human activities. Although little is known about the presence of these chemicals in the environment, recent studies suggested that soil may act as a sink. The aim of the present work was to investigate the presence of fullerenes in soils collected in The Netherlands. Samples (n = 91) were taken from 6 locations and analyzed using a new developed LC-QTOF-MS method. The locations included highly trafficked and industrialized as well as urban and natural areas. In general, C₆₀ was the most abundant fullerene found in the environment, detected in almost a half of the samples and at concentrations in the range of ng/kg. Other fullerenes such as C₇₀ and an unknown structure containing a C₆₀ cage were detected to a lower extent. The highest concentrations were found in the proximity of combustion sites such as a coal power plant and an incinerator, suggesting that the nanoparticles were unintentionally produced during combustions processes and reached the soil through atmospheric deposition. Consistent with other recent studies, these results show that fullerenes are widely present in the environment and that the main route for their entrance may be due to human activities. These data will be helpful in the understanding of the distribution of fullerenes in the environment and for the study of their behavior and fate in soil.

Effect of subcellular distribution on nC₆₀ uptake and transfer efficiency from Scenedesmus obliquus to Daphnia magna

The potential uptake and trophic transfer ability of nanoparticles (NPs) in aquatic organisms have not been well understood yet. There has been an increasing awareness of the subcellular fate of NPs in organisms, but how the subcellular distribution of NPs subsequently affects the trophic transfer to predator remains to be answered. In the present study, the food chain from Scenedesmus obliquus to Daphnia magna was established to simulate the trophic transfer of fullerene aqueous suspension (nC60). The nC60 contaminated algae were separated into three fractions: cell wall (CW), cell organelle (CO), and cell membrane (CM) fractions, and we investigated the nC60 uptake amounts and trophic transfer efficiency to the predator through dietary exposure to algae or algal subcellular fractions. The nC60 distribution in CW fraction of S. obliquus was the highest, following by CO and CM fractions. nC60 uptake amounts in D. magna were found to be mainly relative to the NPs' distribution in CW fraction and daphnia uptake ability from CW fraction, whereas the nC60 trophic transfer efficiency (TE) were mainly in accordance with the transfer ability of NPs from the CO fraction. CW fed group possessed the highest uptake amount, followed by CO and CM fed groups, but the presence of humic acid (HA) significantly decreased the nC60 uptake from CW fed group. The CO fed groups acquired high TE values for nC60, while CM fed groups had low TE values. Moreover, even though CW fed group had a high TE value; it decreased significantly with the presence of HA. This study contributes to the understanding of fullerene NPs' dietary exposure to aquatic organisms, suggesting that NPs in different food forms are not necessarily equally trophically available to the predator.

Vulnerability of drinking water supplies to engineered nanoparticles

The production and use of engineered nanoparticles (ENPs) inevitably leads to their release into aquatic environments, with the quantities involved expected to increase significantly in the future. Concerns therefore arise over the possibility that ENPs might pose a threat to drinking water supplies. Investigations into the vulnerability of drinking water supplies to ENPs are hampered by the absence of suitable analytical methods that are capable of detecting and quantifiying ENPs in complex aqueous matrices. Analytical data concerning the presence of ENPs in drinking water supplies is therefore scarce. The eventual fate of ENPs in the natural environment and in processes that are important for drinking water production are currently being investigated through laboratory based-experiments and modelling. Although the information obtained from these studies may not, as yet, be sufficient to allow comprehensive assessment of the complete life-cycle of ENPs, it does provide a valuable starting point for predicting the significance of ENPs to drinking water supplies. This review therefore addresses the vulnerability of drinking water supplies to ENPs. The risk of ENPs entering drinking water is discussed and predicted for drinking water produced from groundwater and from surface water. Our evaluation is based on reviewing published data concerning ENP production amounts and release patterns, the occurrence and behavior of ENPs in aquatic systems relevant for drinking water supply and ENP removability in drinking water purification processes. Quantitative predictions are made based on realistic high-input case scenarios. The results of our synthesis of current knowledge suggest that the risk probability of ENPs being present in surface water resources is generally limited, but that particular local conditions may increase the probability of raw water contamination by ENPs. Drinking water extracted from porous media aquifers are not generally considered to be prone to ENP contamination. In karstic aquifers, however, there is an increased probability that if any ENPs enter the groundwater system they will reach the extraction point of a drinking water treatment plant (DWTP). The ability to remove ENPs during water treatment depends on the specific design of the treatment process. In conventional DWTPs with no flocculation step a proportion of ENPs, if present in the raw water, may reach the final drinking water. The use of ultrafiltration techniques improves drinking water safety with respect to ENP contamination.

Detachment of fullerene nC60 nanoparticles in saturated porous media under flow/stop-flow conditions: Column experiments and mechanistic explanations

This study was aimed at investigating the detachment of fullerene nC60 nanoparticles (NPs) in saturated sand porous media under transient and static conditions. The nC60 NPs were first attached at primary minima of Derjaguin-Landau-Verwey-Overbeek (DLVO) interaction energy profiles in electrolyte solutions with different ionic strengths (ISs). The columns were then eluted with deionized water to initiate nC60 NP detachment by decreasing solution IS. Finally, the flow of the columns was periodically interrupted to investigate nC60 NP detachment under static condition. Our results show that the detachment of nC60 NPs occurred under both transient and static conditions. The detachment under transient conditions was attributed to the fact that the attractions acting on the nC60 NPs at primary minima were weakened by nanoscale physical heterogeneities and overcome by hydrodynamic drags at lower ISs. However, a fraction of nC60 NPs remained at shallow primary minima in low flow regions, and detached via Brownian diffusion during flow interruptions. Greater detachment of nC60 NPs occurred under both transient and static conditions if the NPs were initially retained in electrolyte solutions with lower valent cations due to lower attractions between the NPs and collectors. Decrease in collector surface chemical heterogeneities and addition of dissolved organic matter also increased the extent of detachment by increasing electrostatic and steric repulsions, respectively. While particle attachment in and subsequent detachment from secondary minima occur in the same electrolyte solution, our results indicate that perturbation in solution chemistry is necessary to lower the primary minimum depths to initiate spontaneous detachment from the primary minima. These findings have important implications for predicting the fate and transport of nC60 NPs in subsurface environments during multiple rainfall events and accordingly for accurately assessing their environmental risks.

A method for the determination of fullerenes in soil and sediment matrices using ultra-high performance liquid chromatography coupled with heated electrospray quadrupole time of flight mass spectrometry

The increasing production of fullerenes likely means a release of these chemicals in the environment. Since soils and sediments are expected to act as a sink, analytical tools are needed to assess the presence of fullerenes in these matrices. In the present work, a method was developed for the determination of fullerenes at environmental relevant levels employing Ultra High Performance Liquid Chromatograph coupled with High Resolution Mass Spectrometry (UHPLC-HRMS). Chromatographic separation was achieved with a core-shell biphenyl stationary phase that provided fast analysis with complete baseline separation. Ion Booster Electro Spray Ionization (IB-ESI) resulted in higher ionization efficiency and was much less susceptible to adduct formation in comparison with standard ESI, whereas Quadrupole Time of Flight (QTOF) MS granted high resolution mass spectra used for accurate identification. The Instrumental method limits of detection (ILoD) and quantification (ILoQ) were 6 and 20 fg, respectively, for C60 and 12 and 39 fg, respectively, for C70. Matrix effects related to co-extractants were systematically investigated in soil and sediments extracts through standard addition method (SAM) and monitoring the signal response during the chromatographic run of these samples. Consequently, minor chromatographic modifications were necessary for the analysis of matrices with high organic carbon content. The method limit of detection (MLoD)ranged from 84 pg/kg to 335 pg/kg, whereas limit of quantification (MLoQ) ranged from 279 pg/kg to 1.1 ng/kg. Furthermore, the method was successfully applied for the analysis of functionalized fullerenes (i.e. methanofullerenes). To the best of our knowledge, this is the first analytical method for the analysis of fullerenes in soils and sediments that employ core-shell biphenyl stationary phase as well as IB-ESI-QTOF MS hyphenated with UHPLC.

Effects of graphene oxides on soil enzyme activity and microbial biomass

Due to recent developments in nanotechnology, nanomaterials (NMs) such as graphene oxide (GO) may enter the soil environment with mostly unknown consequences. We investigated the effects of GO on soil microbial activity in a 59-day soil incubation study. For this, high-purity GO was prepared and characterized. Soils were treated with up to 1 mg GO g(-1) soil, and the changes in the activities of 1,4-β-glucosidase, cellobiohydrolase, xylosidase, 1,4-β-N-acetyl glucosaminidase, and phosphatase and microbial biomass were determined. 0.5-1 mg GO g(-1) soil lowered the activity of xylosidase, 1,4-β-N-acetyl glucosaminidase, and phosphatase by up to 50% when compared to that in the control soils up to 21 days of incubation. Microbial biomass in soils treated with GO was not significantly different from that in control soils throughout the incubation period, and the soil enzyme activity and microbial biomass were not significantly correlated in this study. Our results indicate that soil enzyme activity can be lowered by the entry of GO into soils in short term but it can be recovered afterwards.