Facile hydrothermal preparation of recyclable S-doped graphene sponge for Cu2+ adsorption

Advances in the synthesis of heteroatom-doped graphene-based materials and their application in sensors, adsorbents and catalysis

In recent years, as a new type of carbon material, graphene has attracted much attention owing to its high conductivity, large specific surface area and excellent chemical stability. After introducing heteroatoms into graphene, the physical, chemical and biological properties of doped graphene are significantly enhanced. This review focuses on synthesis methods for N, B, P and S co-doped graphene and graphene-based composites and comprehensively discusses their recent applications in the fields of sensors, adsorbents and catalysis. The challenges and application prospects of heteroatom doped graphene materials are also proposed. This study provides a reference and guidance for the development and application of new doped graphene materials.

A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

The rampant rise in world population, industrialization, and urbanization expedite the contamination of water sources. The presence of the non-biodegradable character of heavy metals in waterways badly affects the ecological balance. In this modern era, the unavailability of getting clear water as well as the downturn in water quality is a major concern. Therefore, the effective removal of heavy metals has become much more important than before. In recent years, the attention to better wastewater remediation was directed towards adsorption techniques with novel adsorbents such as carbon nanomaterials. This review paper primarily emphasizes the fundamental concepts, structures, and unique surface properties of novel adsorbents, the harmful effects of various heavy metals, and the adsorption mechanism. This review will give an insight into the current status of research in the realm of sustainable wastewater treatment, applications of carbon nanomaterials, different types of functionalized carbon nanotubes, graphene, graphene oxide, and their adsorption capacity. The importance of MD simulations and density functional theory (DFT) in the elimination of heavy metals from aqueous media is also discussed. In addition to that, the effect of factors on heavy metal adsorption such as electric field and pressure is addressed.

Nitrogen-doped graphene for tetracycline removal via enhancing adsorption and non-radical persulfate activation

Nitrogen-doped graphene (NG) was synthesized via direct thermal annealing treatment. The obtained NG showed outstanding removal ability for tetracycline (TC) ascribed to enhanced adsorption and persulfate activation. The maximum TC adsorption capacity calculated from the Langmuir model of NG was 227.3 mg/g, which was 1.66 times larger than nitrogen-free graphene. The coexistence of NG and persulfate (PS) exhibited complete degradation of TC within 120 min attributed to the successful modification of nitrogen. Further analysis demonstrated that non-radical electron transfer was the dominant degradation pathway, which was different from the widely acknowledgeable radical mechanism. An electron donor-mediator-acceptor system was introduced, in which TC, NG, and PS performed as electron donor, mediator, and acceptor, respectively. The potential intermediates in the TC degradation process were detected and toxicity assessment was also performed. In addition, more than 75.8% of total organic carbon was removed, and excellent reusability was manifested in multiple adsorption and degradation experiments.

Investigating the electrochemical advanced oxidation mechanism of N-doped graphene aerogel: Molecular dynamics simulation combined with DFT method

Nitrogen-doped graphene as a perfectly-efficient and environmentally compatible electrocatalyst won widespread attention in electrochemical advanced oxidation processes (EAOP). However, the relationship between surface structure regulation and activity of catalysts is still lacking in systematic scientific guidance. Herein, nitrogen-doped graphene aerogel (NGA) was conveniently prepared through hydrothermal treatment, and then utilized to fabricate the gas diffusion electrode (GDE) as the cathode for tetracycline (TC) removal. High free radical yield (81.2 μM) and fast reaction rate (0.1469 min^-1) were found in NGA system. The molecular dynamics simulation (MD) results showed that the interaction energy of NGA was greater than the raw graphene aerogel (GA). The adsorption activation of H₂O₂ and the degradation of TC occurred in the first adsorption layer of catalysts, and both processes turned more orderly after nitrogen doping. Moreover, the van der Waals interaction was stronger than the electrostatic interaction. Density function theory (DFT) revealed that the adsorption energy of H₂O₂ at graphitic N, pyridinic N, and pyrrolic N sites was -0.03 eV, -0.39 eV, and -0.30 eV, respectively. Pyridinic N sites were inferred as the main functional regions of in-situ activation •OH, there were more likely to occur ectopic reaction in pyrrolic N, and graphitic N were responsible for improving H₂O₂ production. By revealing the microstructure and activation characteristics of NGA, an experiment-simulation complementary strategy is provided in the EAOP to discover or to optimize new catalysts.

Stimulating effects of reduced graphene oxide on the growth and nitrogen fixation activity of nitrogen-fixing bacterium Azotobacter chroococcum

Graphene has found important applications in various areas and hundred tons of graphene materials are annually produced. It is crucial to investigate both the negative and positive environmental effects of graphene materials to ensure the safe applications and develop environmental applications. In this study, we reported the stimulating effects of reduced graphene oxide (RGO) to nitrogen-fixing bacterium Azotobacter chroococcum. RGO stimulated the cell growth of A. chroococcum at 0.010-0.500 mg/mL according to the growth curves and the colony-forming unit (CFU) increases. RGO wrapped over the A. chroococcum cells without inducing ultrastructural changes. RGO decreased the leakage of cell membrane, but slight oxidative stress was observed in A. chroococcum. RGO promoted the nitrogen fixation activity of A. chroococcum at 0.5 mg/mL according to both isotope dilution method and acetylene reduction activity measurements. Consequently, the increases of soil nitrogen contents were evidenced, in particular about 30% increase of organic nitrogen occurred at 0.5 mg/mL of RGO. In addition, RGO might possibly benefit the plant growth through enhancing the indoleacetic acid production of A. chroococcum. These results highlighted the positive environmental effects of graphene materials to nitrogen-fixing bacteria in nitrogen cycle.

A molecular modeling on the boron trichloride gas detection by S- and Cr-doped graphyne

Here, we scrutinize the adsorption of boron trichloride (BCl₃) on pure, S-doped, and Cr-doped graphyne by means of density functional theory (DFT) calculations. BCl₃ interacts weakly with pure graphyne, so it cannot be employed as a sensor. Despite the strengthening of interaction through S-doping, we cannot still employ the S-doped sheet as a sensor. Nevertheless, there is a considerable increase in the sensitivity and reactivity of the sheet through substituting the transition metal Cr for the C. There is a reduction in the HOMO-LUMO gap of Cr-doped graphyne from 2.18 to 1.38 eV when BCl₃ is adsorbed, thereby increasing the electrical conductivity to a great extent. Hence, it is possible to convert the considerable change in conductivity into an electronic signal, which demonstrates the encouraging nature of Cr-doped graphyne as a sensor to detect BCl₃. Additionally, the adsorption process reduces the work function of graphyne to a great extent, which demonstrates that we can also employ it as a work function-type sensor for detecting BCl₃.

Strategies to improve the adsorption properties of graphene-based adsorbent towards heavy metal ions and their compound pollutants: A review

Heavy metal-containing wastewater can be treated by adsorption technology to obtain ultra-low concentration or high-quality treated effluent. Due to the constraints of the specific surface area, surface electrical structure and spatial effect of conventional adsorbents, it is often difficult to obtain adsorbents within high adsorption capacity. Graphene has characteristics of large specific surface area, small particle size, and high adsorption efficiency. It is considered as one of the research hotspots in recent years. However, despite graphene's unique properties, graphene-based adsorbents still have some drawbacks, i.e. graphene nanosheets are easier to be stacked with each other via π-π stacking and van der Waals interactions, which affect the site exposure, impede the rapid mass transport and limit its adsorption performance. Special strategy is needed to overcome its drawbacks. This work summarizes recent literatures on utilization of three strategies-surface functionalization regulation, morphology and structure control and material composite, to improve the adsorption properties of graphene-based adsorbent towards heavy metal removal. A brief summary, perspective on strategies to improving adsorption properties of graphene-based materials for heavy metal adsorption are also presented. Certainly, this review will be useful for designing and manufacturing of graphene-based nanomaterials for water treatment.

Remediation of artificially contaminated soil and groundwater with copper using hydroxyapatite/calcium silicate hydrate recovered from phosphorus-rich wastewater

Excessive copper (Cu) in contaminated soil and groundwater has attracted continuous attentions due to the bioaccumulation and durability. In this study, the feasibility of remediation of heavy metal pollution in soil and groundwater was investigated using hydroxyapatite/calcium silicate hydrate (HAP/C-S-H) recovered from phosphorus-rich wastewater in farmland. The results show that the pH has a strong effect on copper removal from Cu-contaminated groundwater but the impact of ion strength on the removal is weak. In general, high pH and low ion strength give better results in copper removal. Kinetic and isotherm data from the study fit well with Pseudo-second-order kinetic model and Langmuir isotherm model, respectively. The maximum adsorption capacity of HAP/C-S-H (138 mg/g) was higher than that of C-S-H (90.3 mg/g) when pH value, temperature, and ionic strength were 5, 308 K, and 0.01 M, respectively. Thermodynamics results indicate that Cu removal is a spontaneous and endothermic process. X-ray diffraction (XRD) results show that the mechanism of copper removal involves physical adsorption, chemical precipitation and ion exchange. For the remediation of Cu-contaminated soil, 76.3% of leachable copper was immobilized by HAP/C-S-H after 28 d. Acid soluble Cu, the main contributor to biotoxicity, decreased significantly while reducible and residual Cu increased. After immobilization, the acid neutralization capacity of the soil increased and the dissolution of copper was substantially reduced in near-neutral pH. It can be concluded that HAP/C-S-H is an effective, low-cost and eco-friendly reagent for in-situ remediation of heavy metal polluted soil and groundwater.

DFT computational study towards investigating psychotropic drugs, promazine and trifluoperazine adsorption on graphene, fullerene and carbon cyclic ring nanoclusters

Detection and qualification process related to impurities assume importance in pharmacological drug development programmes and the present article gives the structural and spectral characterisation of phenothiazine derivatives, promazine (PME) and trifluoperazine (TPE) and their self-assembly with graphene/fullerene/carbon ring (CG/CF/CR) systems theoretically. The investigation of adsorption behaviour of these compounds can provide valuable information about its reactivity, electronic and structural properties. Three-dimensional electrostatic potential diagrams were mapped. The frontier orbital energies and energy band gaps of the molecules were computed. Delocalization of charge density between the bonding or lone pair and antibonding orbitals is calculated by NBO analysis. Docking was executed to investigate binding areas of chemical compounds. Bioactivity scores show that the pharmacokinetic and pharmacological properties of the ligands are appropriate leading to be considered potential drug agents. The obtained theoretical wavenumber results of the present study were fully compatible with the experimental results.

Utilization of O/S-doped graphene nanoclusters for ultrasensitive detection of flurane derivatives-DFT investigations

Nanocluster based drug delivery systems are very useful in modern medical treatment and interaction mechanism of desflurane (DES), isoflurane ISO), sevoflurane (SEV) over carboxyl substituted graphene-doped with O and S atoms were investigated in the present study. Different electronic and chemical properties of adsorbed desflurane, isoflurane and sevoflurane with nanoclusters are analyzed. To track the drugs, SERS is used as an efficient method and drug's detection was analyzed using SERS. DES's energy over GQD-S is greater than that over GQD-O nanocluster and for ISO and SEV, adsorption energies over the O/S nanoclusters are same. The title drugs work on the reactives sites and got adsorbed. For ISO, there is an increase in fluorine atom charges and for DES and SEV, the fluorine atom charge decreases due to adsorption in both O/S nanoclusters. Changes in chemical descriptors are identified for the sensing property of drug-nanoclusters.Communicated by Ramaswamy H. Sarma.

Cytotoxic aquatic pollutants and their removal by nanocomposite-based sorbents

Water is an extremely essential compound for human life and, hence, accessing drinking water is very important all over the world. Nowadays, due to the urbanization and industrialization, several noxious pollutants are discharged into water. Water pollution by various cytotoxic contaminants, e.g. heavy metal ions, drugs, pesticides, dyes, residues a drastic public health issue for human beings; hence, this topic has been receiving much attention for the specific approaches and technologies to remove hazardous contaminants from water and wastewater. In the current review, the cytotoxicity of different sorts of aquatic pollutants for mammalian is presented. In addition, we will overview the recent advances in various nanocomposite-based adsorbents and different approaches of pollutants removal from water/wastewater with several examples to provide a backdrop for future research.

Graphene-Based Macromolecular Assemblies for Scavenging Heavy Metals

The integration of graphene or graphene oxide nanosheets into three-dimensional (3D) graphene-based macromolecular assemblies (GMAs), in the form of sponges, beads, fibres, films, and crumpled nanosheets, has greatly advanced their environmental remediation applications. This is attributed to the outstanding physicochemical characteristics and superlative mechanical features of 3D GMAs, including precise and physically linked permeable networks, enormous surface area, profound porosity, and high-class sturdiness, amongst others. In this review, the recent advancements towards the exploration of 3D GMAs as an exciting new class of high-performance adsorbents, for eliminating toxic heavy metal ions from both wastewater and freshwater, are systematically summarized and discussed, from both fundamental and applied perspectives. In particular, the numerous surface modification techniques that are actively pursued to enrich the metal adsorption capacity of 3D GMAs, are comprehensively examined. Additionally, associated challenges are pointed out and tactical research strategies and improvements are proposed, with an eye on the conceivable future.

One-step generation of S and N co-doped reduced graphene oxide for high-efficiency adsorption towards methylene blue

S and N co-doped reduced graphene (S–N-rGO) nanohybrids were prepared by a one-step oil bath heating process using glutathione (GSH) as a green and mild co-reduction agent and a S and N source. It can be applied in the field of adsorption for the removal of methylene blue (MB) from aqueous solutions. The efficient adsorption rate of S–N-rGO hybrids for MB (50 mg L⁻¹) was observed with the best even within 2′07′′ from blue solutions into colorless (the mass ratio GO : GSH = 60 : 200). Under this mass ratio, the effects of initial solution pH, temperature, initial concentration and contact time on adsorption towards MB were explored systematically. The results indicated that the adsorption capacity at 275 K could reach up to 598.8 mg g⁻¹, the adsorption behavior followed the pseudo-second-order kinetic model and the equilibrium adsorption data fitted the Langmuir isotherm well. Thermodynamic and kinetic analyses revealed that adsorption is an exothermic, spontaneous and physisorption process.

A novel method was developed to directly generate S and N co-doped reduced graphene oxide for the adsorption of MB.

Boron-, sulfur-, and phosphorus-doped graphene for environmental applications

The control of environmental pollutants is a global concern. Recently, heteroatom-doped graphene has drawn increasing attention due to their widespread applications in removing and detecting environmental pollutants. Owing to the introduction of heteroatoms into pristine graphene, the properties of heteroatom-doped graphene have been significantly enhanced in physic, chemistry, and biology. This review focuses on the approaches for synthesis and characterization of boron-, sulfur-, and phosphorus-doped graphene and their applications in the fields of adsorption, catalysis, and detection for environmental pollutants. The mechanisms of environmental applications, including π-π interactions, complexation, hydrophobic interactions, electronic conductivity, and active sites and reactive radicals, are elaborated. Furthermore, the challenges associated with the use of heteroatom-doped graphene materials and their prospective applications are also proposed.

Adsorptive decontamination of Cu2+-contaminated water and soil by carboxylated graphene oxide/chitosan/cellulose composite beads

Graphene adsorbents have been applied to remove diverse pollutants from aqueous systems. However, the mechanical strength of most graphene adsorbents is low and the fragile graphene sheets are released into the environment. In this study, we prepared carboxylated graphene oxide/chitosan/cellulose (GCCSC) composite beads with good mechanical strength for the immobilization of Cu²⁺ from both water and soil. The proportional limit of GCCSC beads was 3.2 N, a much larger value than graphene oxide beads (0.2 N). The largest pressure for GCCSC beads recorded before brittle failure was 26 N. The Cu²⁺ adsorption capacity of GCCSC beads was 22.4 mg/g in aqueous systems at initial Cu²⁺ concentration of 40 μg/mL, which is competitive with many efficient adsorbents. The partition coefficient (PC) for the Cu²⁺ adsorption onto GCCSC beads was 1.12 mg/g/μM at C_e of 0.83 mg/L and q_e of 14.3 mg/g. The PC decreased to 0.055 mg/g/μM at C_e of 26.0 mg/L and q_e of 22.4 mg/g. The adsorption kinetics of Cu²⁺ on GCCSC beads were moderately fast and required approximately 3 h to reach equilibrium with a k₂ of 0.0021 g/(mg·min). A lower temperature and higher pH slightly increased the adsorption capacity of GCCSC beads. The ionic strength did not influence the adsorption. The porous structure of GCCSC beads blocked the direct contact between soil and the graphene surface; thus, a high Cu²⁺ immobilization efficiency was achieved by GCCSC beads applied to soil. The implications for the design of high-performance graphene adsorbents for water and soil remediation are discussed.

Carboxylated graphene oxide-chitosan spheres immobilize Cu2+ in soil and reduce its bioaccumulation in wheat plants

Due to the strong interaction with pollutants and the huge adsorption capacity, graphene adsorbents are widely applied in water decontamination. However, graphene adsorbents are seldom used in soil remediation, because the adsorptive sites on graphene would be occupied by soil components. In this study, we prepared carboxylated graphene oxide-chitosan (GO-COOH/CS) spheres for the immobilization of Cu²⁺ from water and soil. The pores in GO-COOH/CS allowed the internal diffusion of Cu²⁺ solution, while they blocked the direct contact between the solid soil and the adsorptive sites on graphene sheets. Therefore, the high adsorption capacity of GO-COOH/CS spheres (78 mg/g) was largely retained for the soil Cu²⁺ fixation. The partition coefficient (PC) for Cu²⁺ adsorption onto GO-COOH/CS spheres was 4.2 mg/g/μM at C_e of 0.48 mg/L and q_e of 31 mg/g, while the PC value decreased to 0.096 mg/g/μM at C_e of 91.4 mg/L and q_e of 78 mg/g. At initial Cu²⁺ concentrations of 120 mg/L and lower, the fixation efficiencies were all higher than 99% and the corresponding free Cu²⁺ concentrations in leachates were lower than 1.0 mg/L. The Cu²⁺ fixation on GO-COOH/CS spheres largely reduced its bioaccumulation in wheat roots from 127.8 μg/g to 51.2 μg/g. The toxicity evaluations suggested that GO-COOH/CS spheres were of low toxicity to wheat seedlings and did not amplify the toxicity of Cu²⁺. The implications to the design of graphene adsorbents for soil remediation are discussed. Overall, our results collectively indicated that porous GO-COOH/CS spheres were high-performance adsorbents for the immobilization of Cu²⁺ to reduce Cu²⁺ bioaccumulation in plants.

Biotransformation of Pristine and Oxidized Carbon Nanotubes by the White Rot Fungus Phanerochaete chrysosporium

Carbon nanomaterials are widely studied and applied nowadays, with annual production increasing. After entering the environment, the complete degradation of these carbon nanomaterials by microorganisms is proposed as an effective approach for detoxification and remediation. In this study, we evaluated the degradation of pristine multiwalled carbon nanotubes (p-MWCNTs) and oxidized multiwalled carbon nanotubes (o-MWCNTs) by the white rot fungus Phanerochaete chrysosporium, which is a powerful decomposer in the carbon cycle and environmental remediation. Both p-MWCNTs and o-MWCNTs were partially oxidized by P. chrysosporium as indicated by the addition of oxygen atoms to the carbon skeleton in the forms of C=O and O-H bonds. The fungal oxidation led to the shortening of MWCNTs, where precipitated o-MWCNTs showed more short tubes. During the transformation, the defects on the tubes became detached from the carbon skeleton, resulting in decreases of the ID/IG (intensity of D-band/ intensity of G-band) values in Raman spectra. The transformation mechanism was attributed to the enzymatic degradation by laccase and manganese peroxidase excreted by P. chrysosporium. The results collectively indicated that MWCNTs could be transformed by P. chrysosporium, but complete degradation could not be achieved in a short time period. The implications on the environmental risks of carbon nanomaterials are discussed.

Carboxylation as an effective approach to improve the adsorption performance of graphene materials for Cu2+ removal

Graphene materials are high-performance adsorbents for water and soil remediation, whose oxygen containing groups bind to metal ions intensely. In this study, we prepared carboxylated graphene oxide (GO-OCH₂COOH) sponge and investigated the adsorption behaviors of Cu²⁺ on it by both experimental and computational approaches. Carboxylation largely improved the adsorption capacity from 23.8mg/g for graphene oxide (GO) sponge to 93.8mg/g for GO-OCH₂COOH. The efficient adsorption was due to the strong interaction between Cu²⁺ and carboxyl groups (especially in -OCH₂COOH form) according to the density functional theory calculation, while epoxy and hydroxyl groups contributed lowly. The fast adsorption process was achieved within 30min, corresponding to a large k₂ value of pseudo-second order model (0.061mg/g/min). The adsorption was spontaneous and exothermic according to thermodynamics analyses. The binding strength of Cu²⁺ on GO-OCH₂COOH was so strong that pH and ionic strength had mild impact. The strong binding sites were not recyclable, but the weaker ones (more than 40%) could be regenerated by simple washing. Our results highlighted the importance of chemical design in graphene adsorbents and the potential of GO-OCH₂COOH in heavy metal fixation from water and soil.

Advances in the applications of graphene adsorbents: from water treatment to soil remediation

Graphene, a novel carbon allotrope, is single-layered graphite with honeycomb lattice. Its unique structure endows graphene many outstanding physical/chemical properties and a large surface area, which are beneficial to its applications in many areas. The potential applications of graphene in pollution remediation are adsorption, membrane separation, catalysis, environmental analysis, and so on. The adsorption efficiency of graphene adsorbents largely depends on its surface area, porous structure, oxygen-containing groups and other functional groups, adsorption conditions, and also the properties of adsorbates. With appropriate modifications, graphene materials are mostly efficient adsorbents for organic pollutants (e.g. dyes, pesticides, and oils) and inorganic pollutants (e.g. metal ions, nonmetal ions, and gas). Since our first report of graphene adsorbents in 2010, plenty of studies have been dedicated to developing various graphene adsorbents and to evaluating their performance in treating contaminated water. Recently, there is a growing trend in graphene adsorbents that could be applied in soil remediation, where the situation is much more complicated than in aqueous systems. Herein, we review the design of graphene adsorbents for water treatment and analyze their potential in soil remediation. Several suggestions to accelerate the research on graphene-based soil remediation technology are proposed.

Doping of Carbon Materials for Metal-Free Electrocatalysis

Carbon atoms in the graphitic carbon skeleton can be replaced by heteroatoms with different electronegative from that of the carbon atom (i.e., heteroatom doping) to modulate the charge distribution over the carbon network. The charge modulation can be achieved via direct charge transfer with an electron acceptor/donor (i.e., charge transfer doping) or through introduction of defects (i.e., defective doping). Various doping strategies, including heteroatom doping, charge-transfer doping, and defective doping, have now been devised for modulating the charge distribution of numerous graphite carbon materials to impart new properties to carbon materials. Consequently, carbon nanomaterials with defined doping have recently become prominent members in the carbon family, promising for a variety of applications, including catalysis, energy conversion and storage, environmental remediation, and important chemical production and industrial processes. The purpose of this review is to present an overview on the doping of carbon materials for metal-free electrocatalysis, especially the development of doping strategies and doping-induced structure and property changes for potential catalytic applications. Current challenges and future perspectives in the doped carbon-based metal-free catalyst field are also discussed.

Fungal transformation of graphene by white rot fungus Phanerochaete chrysosporium

The wide applications of graphene materials require the thorough investigation on their biosafety and environmental risks. Transformation of graphene materials is a fundamental issue in their environmental risk evaluations. The enzymatic degradation of graphene is widely reported using peroxidases, but the information on the fungal transformation of graphene is still unavailable. Herein, we incubated reduced graphene oxide (RGO) in the white rot fungus Phanerochaete chrysosporium culture system for 4 weeks and investigated the transformation of RGO by multiple techniques. P. chrysosporium efficiently added oxygen to RGO and decreased the its carbon contents accordingly. The I_D/I_G ratios of RGO showed statistically increases upon the transformation by P. chrysosporium according to Raman spectroscopy, suggesting the increase of defects on carbon skeleton. The negatively charged oxygen containing groups exfoliated the graphene sheets as indicated by the larger layer distance according to the X-ray diffraction spectra and the increased roughness under scanning electron microscopy. The transformation was more obvious in the RGO separated from the fungal balls than the precipitates in the culture medium. The mechanism of transformation was attributed to the enzymatic degradation by P. chrysosporium. The environmental implication of the fungal transformation of graphene materials and the potential of using fungi to reduce the environmental risks of graphene materials are discussed.

Environmental separation and enrichment of gold and palladium ions by amino-modified three-dimensional graphene

The excellent adsorption properties of three-dimensional graphene (3DG) can be further enhanced by triethylenetetramine modification to increase its adsorption capacity for precious metal ions. Herein, we successfully synthesized an amino-modified 3DG (N-3DG) adsorbent with improved adsorption conditions with regards to pH value, dosage, and adsorption time. Adsorption equilibrium was reached at pH 3 over 120 min. In addition, the theoretical basis for the adsorption of N-3DG is provided by fitting the adsorption isotherm model. The synthesized material was tested in seawater and lake water samples for the adsorption of precious metals, namely Au(iii) and Pd(ii), achieving a recovery rate of 87% to 106% as assessed by inductively coupled plasma mass spectrometry. Thus, N-3DG showed good adsorptivity. The present results indicate that N-3DG materials could have a viable application in environmental and sewage treatment in the near future.

Nanostructured morphology control and phase transition of zeolitic imidazolate frameworks as an ultra-high performance adsorbent for water purification

By adjusting the methanol/water ratio to control the phases and morphologies, ZIFs showed enhanced performance for heavy metal adsorption.

Functionalized three-dimensional graphene sponges for highly efficient crude and diesel oil adsorption

Modified Hummer's method has been used in this study to synthesize graphene oxide (GO) solution that was utilized for the fabrication of three-dimensional (3D) graphene sponges and their subsequent functionalization through a low-cost and facile vapor-based surface enhancement approach. The functionalized 3D-graphene sponge is an excellent absorbent, which can remove more than 3300 wt.% of crude oil (calculated with respect to the original sorbent mass). The functionalization of the obtained graphene sponges with trichloro (1H,1H,2H,2H-perfluorooctyl)silane enhanced their wettability properties due to the super-hydrophobic nature of the resulting materials characterized by the contact angles in water greater than 150°. Furthermore, their elastic compression modulus (estimated by conducting a series of compression tests) was about 22.3 kPa. The equilibrium modeling of the oil removal process, which was performed by plotting Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherms, confirmed the properties of the fabricated 3D graphene sponges as exceptional absorbents for crude and diesel oil, which could be attributed to the oleophilic nature of graphene. Moreover, the obtained 3D graphene sponges could be regenerated via heat treatment, which was conducted to release the adsorbed species. After five adsorption-desorption cycles, the sorption capacity of the produced 3D graphene sponges towards crude oil reached 95% of the initial value.

Facile preparation of nitrogen and sulfur co-doped graphene-based aerogel for simultaneous removal of Cd2+ and organic dyes

The need in simultaneous removal of heavy metals and organic compounds dictates the development of synthetic adsorbents with tailor-made properties. A nitrogen (N) and sulfur (S) co-doped graphene-based aerogel (GBA) modified with 2,5-dithiobisurea was synthesized hydrothermally for simultaneous adsorption of Cd²⁺ and organic dyes-safranin-O (SO), crystal violet (CV), and methylene blue (MB). 2,5-Dithiobisurea was used as nitrogen and sulfur sources to introduce N and S-containing functional group onto graphene oxide. The adsorption mechanism of GBA towards Cd²⁺ and organic dyes was studied by Dumwald-Wagner models and the results showed that surface and intraparticle diffusion was the key factor in controlling the rate of adsorption. The maximum adsorption capacities of GBA towards Cd²⁺, SO, CV, and MB comprised 1.755, 0.949, 0.538, and 0.389 mmol/g in monocomponent system, respectively. Adsorption synergism was observed with respect to Cd²⁺ in presence of the dyes. The performance of GBA with respect to Cd²⁺ removal from binary solutions, Cd²⁺-SO, Cd²⁺-CV, and Cd²⁺-MB, was enhanced by the presence of the dyes significantly, while the adsorption capacities towards the dyes were not affected by the presence of Cd²⁺.

Facile synthesis of surface-functionalized magnetic nanocomposites for effectively selective adsorption of cationic dyes

A new magnetic nano-adsorbent, polycatechol modified Fe₃O₄ magnetic nanoparticles (Fe₃O₄/PCC MNPs) were prepared by a facile chemical coprecipitation method using iron salts and catechol solution as precursors. Fe₃O₄/PCC MNPs owned negatively charged surface with oxygen-containing groups and showed a strong adsorption capacity and fast adsorption rates for the removal of cationic dyes in water. The adsorption capacity of methylene blue (MB), cationic turquoise blue GB (GB), malachite green (MG), crystal violet (CV) and cationic pink FG (FG) were 60.06 mg g^- 1, 70.97 mg g^- 1, 66.84 mg g^- 1, 66.01 mg g^- 1 and 50.27 mg g^- 1, respectively. The adsorption mechanism was proposed by the analyses of the adsorption isotherms and adsorption kinetics of cationic dyes on Fe₃O₄/PCC MNPs. Moreover, the cationic dyes adsorbed on the MNPs as a function of contact time, pH value, temperature, coexisting cationic ions and ion strength were also investigated. These results suggested that the Fe₃O₄/PCC MNPs is promising to be used as a magnetic adsorbent for selective adsorption of cationic dyes in wastewater treatment.

Rapid synthesis of three-dimensional sulfur-doped porous graphene via solid-state microwave irradiation for protein removal in plasma sample pretreatment

In this work, we prepared three-dimensional sulfur-doped porous graphene (3D-SPG) via solid-state microwave method and first introduced it to plasma sample pretreatment as adsorbent for the removal of proteins. The efficient heating effect of solid-state microwave irradiation endowed the as-prepared 3D-SPG with large specific surface area, porous structures and sulfur-doped conjugated π electron surface, thus producing an outstanding adsorbent for proteins adsorption. The adsorption behavior of 3D-SPG towards proteins was explored using bovine serum albumin (BSA) as the model protein and several kinetic models and isotherm models were employed to describe the adsorption process. The results indicated that BSA was adsorbed onto 3D-SPG in a monolayer manner with high adsorption capacity, and chemisorption and intraparticle diffusion was the rate-controlling step in proteins adsorption process. By applying 3D-SPG as adsorbent to remove proteins in real rat plasma, we found that 3D-SPG solid phase extraction (SPE) gained exceedingly high protein removal efficiency compared with other plasma pretreatment methods, suggesting that 3D-SPG SPE could effectively prevent the deterioration of column performance and decrease the interference caused by matrix effect in the follow-up analysis. Furthermore, in comparison with the tandem mass spectra results between 3D-SPG SPE and methanol precipitation, 3D-SPG SPE demonstrated the ability to extract the protein-binding metabolites which usually could not be extracted by methanol precipitation. This ability made 3D-SPG SPE of great value in untargeted metabolomics profiling, because 3D-SPG SPE could be a complementary method to methanol precipitation to improve the coverage of metabolites.

Environmentally Friendly in Situ Regeneration of Graphene Aerogel as a Model Conductive Adsorbent

Adsorption is a classical process widely used in industry and environmental protection, and the regeneration of exhausted adsorbents, as the reverse process of adsorption, is vital to achieving a sustainable adsorption process. Chemical and thermal regeneration, which feature high costs and environmental side effects, are classical but not environmentally friendly methods. Herein, a new regeneration method based on an electrochemical process using graphene aerogel (GA) as a model conductive adsorbent was proposed. First, 3D GA was prepared to adsorb organic and inorganic pollutants, avoiding the inconvenience of using powdered graphene. Then, the exhausted GA was cleaned by the electrochemical desorption and degradation of adsorbed organic pollutants if undesired and the electrorepulsion of adsorbed metal ions in the absence of any additional chemicals, showing a high processing capability of 1.21 L g^-1 GA h^-1 and low energy consumption (∼0.2 kWh m^-3 solution). The mechanisms involved in the electrochemistry-induced desorption process cover a decline in the GA adsorption performance depended on the electrochemically adjustable surface charge conditions, and the further repulsion and migration of adsorbates is subject to the strong in situ electric field. This work has important implications for the development of environmentally friendly regeneration processes and qualified adsorbents as well as the application of a green and efficient regeneration concept for traditional adsorption processes.

Influence of reduced graphene oxide on the growth, structure and decomposition activity of white-rot fungus Phanerochaete chrysosporium

Graphene materials have attracted great interest nowadays due to their large-scale production and wide applications. It is urgent to evaluate the ecological and environmental risk of graphene materials for the healthy development of the graphene industry. Herein, we evaluated the influence of reduced graphene oxide (RGO) on the growth, structure and decomposition activity of white-rot fungus, whose decomposition function is vital for carbon cycle. RGO slightly stimulated the fresh weight and dry weight gains of Phanerochaete chrysosporium. A larger number of fibrous structures were observed at low RGO concentrations in P. chrysosporium, which was consistent with the elongation of cells observed under a transmission electron microscope. RGO did not affect the chemical composition of P. chrysosporium. Moreover, the laccase production of P. chrysosporium was not influenced by RGO. The degradation activities of P. chrysosporium for dye and wood appeared to be promoted slightly, but the differences were insignificant compared to the control. Therefore, RGO had low toxicity to white-rot fungus and was relatively safe for the carbon cycle.

RGO stimulated the growth of white-rot fungus and did not influence its degradation activity.

Toxicity of graphene oxide to naked oats (Avena sativa L.) in hydroponic and soil cultures

Graphene oxide showed much higher toxicity to plants in hydroponic culture than in soil culture.

Preparation and Application of Carboxylated Graphene Oxide Sponge in Dye Removal

Spongy graphene is a newly developed adsorbent of high performance for water treatment. Proper functionalization is an efficient approach to improve the adsorption capacity of graphene adsorbents. In this study, we prepared graphene oxide (GO), functionalized it with carboxyl groups to produce carboxylated GO (GO-COOH) dispersion, and lyophilized the GO-COOH dispersion to obtain the GO-COOH sponge. The adsorption isotherm, kinetics, thermodynamics, influencing factors, and regeneration of the adsorption of dye methylene blue (MB) on GO-COOH sponge were evaluated in batch experiments. The adsorption capacity of GO-COOH sponge was measured as 780 mg/g, which was nearly twice that of GO sponge (446 mg/g). The adsorption isotherm could be well described by the Freundlich model with a KF of 508 (L/mg)1/n. The adsorption kinetic was nicely fitted by pseudo-first-order model with a k₁ of 0.00157·min-1. In thermodynamics analysis, the negative ΔG indicated the spontaneous nature of adsorption on GO-COOH sponge. The adsorption process was endothermic and was driven by the increase of entropy. Higher pH benefited the removal of MB by GO-COOH sponge and the ionic strength had no meaningful effect. The regeneration was poor due to the strong electrostatic interaction between MB and the GO-COOH sponge. The results collectively suggested that carboxylation increased the adsorption performance of GO sponge.

Synthesis of magnetic graphene oxide grafted polymaleicamide dendrimer nanohybrids for adsorption of Pb(II) in aqueous solution

In this paper, using maleic anhydride and ethylenediamine as functional monomers, graphene oxide (GO) loaded magnetic Fe₃O₄ nanoparticles modified by (3-Aminopropyl) triethoxysilane as support, magnetic graphene oxide grafted polymaleicamide dendrimer (GO/Fe₃O₄-g-PMAAM) nanohybrids were fabricated by divergent method and magnetic separation technology. The obtained samples were characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, elementary analyzer and vibrating sample magnetometer. The effects of PMAAM generations, solution pH, Pb(II) initial concentration, temperature and contact time on the adsorption property of the samples for Pb(II) in aqueous solution were studied. The results demonstrated that nitrogen content and adsorption capacity of the as-synthesized samples with amino terminal groups were all higher than their adjacent generations PMAAM with carboxyl terminal groups. Moreover, with increasing generations of PMAAM grafted on to the GO/Fe₃O₄, the nitrogen content and the adsorption capacity of the samples with the same terminal groups gradually increased. The maximum adsorption capacity of GO/Fe₃O₄-g-G3.0 for Pb(II) was 181.4mgg^-1 at 298K. The rising of temperature was beneficial for the adsorption. The adsorption kinetics had a better agreement with pseudo-second-order equation, and equilibrium data followed the Langmuir model.

Graphene sponge decorated with copper nanoparticles as a novel bactericidal filter for inactivation of Escherichia coli

Nanotechnology has great potential in water purification. However, the limitations such as aggregation and toxicity of nanomaterials have blocked their practical application. In this work, a novel copper nanoparticles-decorated graphene sponge (Cu-GS) was synthesized using a facile hydrothermal method. Cu-GS consisting of three-dimensional (3D) porous graphene network and well-dispersed Cu nanoparticles exhibited high antibacterial efficiency against Esherichia coli when used as a bactericidal filter. The morphological changes determined by scanning electron microscope and fluorescence images measured by flow cytometry confirmed the involvement of membrane damage induced by Cu-GS in their antibacterial process. The oxidative ability of Cu-GS and intercellular reactive oxygen species (ROS) were also determined to elucidate the possible antibacterial mechanism of Cu-GS. Moreover, the concentration of released copper ions from Cu-GS was far below the drinking water standard, and the copper ions also have an effect on the antibacterial activity of Cu-GS. Results suggested that Cu-GS as a novel bactericidal filter possessed a potential application of water disinfection.

Bioaccumulation and Toxicity of 13C-Skeleton Labeled Graphene Oxide in Wheat

Graphene nanomaterials have many diverse applications, but are considered to be emerging environmental pollutants. Thus, their potential environmental risks and biosafety are receiving increased attention. Bioaccumulation and toxicity evaluations in plants are essential for biosafety assessment. In this study, ¹³C-stable isotope labeling of the carbon skeleton of graphene oxide (GO) was applied to investigate the bioaccumulation and toxicity of GO in wheat. Bioaccumulation of GO was accurately quantified according to the ¹³C/¹²C ratio. Wheat seedlings were exposed to ¹³C-labeled GO at 1.0 mg/mL in nutrient solution for 15 d. ¹³C-GO accumulated predominantly in the root with a content of 112 μg/g at day 15, hindered the development and growth of wheat plants, disrupted root structure and cellular ultrastructure, and promoted oxidative stress. The GO that accumulated in the root showed extremely limited translocation to the stem and leaves. During the experimental period, GO was excreted slowly from the root. GO inhibited the germination of wheat seeds at high concentrations (≥0.4 mg/mL). The mechanism of GO toxicity to wheat may be associated with oxidative stress induced by GO bioaccumulation, reflected by the changes of malondialdehyde concentration, catalase activity, and peroxidase activity. The results demonstrate that ¹³C labeling is a promising method to investigate environmental impacts and fates of carbon nanomaterials in biological systems.

Influence of graphene oxide and reduced graphene oxide on the activity and conformation of lysozyme

The dramatically different bio-effects of graphene and graphene oxide (GO) have been widely observed in diverse biological systems, which determine the applications and toxicity of graphene materials. To elucidate the mechanism at molecular level, it is urgent to investigate the enzyme-graphene interaction and its consequences. In this study, we comparatively studied the influence of GO and reduced GO (RGO) on the activity and conformation of lysozyme to provide better understandings of their different bio-effects. Both GO and RGO adsorbed large quantities of lysozyme after incubation. GO inhibited lysozyme activity seriously, while RGO nearly had no influence on the enzyme activity. The different inhibitions of enzyme activity could be explained by the lysozyme conformational changes, where GO induced more changes to the protein conformation according to UV-vis absorbance, far-UV circular dichroism spectra, intrinsic fluorescence quenching, and infrared spectra. Based on the spectroscopic changes of lysozyme, GO induced the loss of secondary structure and exposed the active site of lysozyme more to the aqueous environment. In addition, neither GO nor RGO induced the fibrillation of lysozyme after 12d incubation. The results collectively indicated that the oxidation degree significantly impacted the enzyme-graphene interaction. The implications to the designs of enzyme-graphene system for bio-related applications and the toxicological effects of graphene materials are discussed.

Al-doped graphene as an effective adsorber for some toxic derivatives of aromatic hydrocarbons

The density functional theory (DFT) was used to investigate some toxic derivatives of aromatic hydrocarbons adsorption on perfect graphene (pG) and graphene-doped with B/Al/Ga (BG/AlG/GaG). And the parallel and vertical adsorptions were considered for the position relation between the adsorbent and adsorbate. The adsorption energy, adsorption distance, charge transfer and density of states (DOS) were discussed in optimized structures. The greater adsorption energy, shorter adsorption distance and more charge transfer were found in AlG by studying the four kinds of molecules (phenol/m-cresol/PCP/p-NP) adsorption on pG/BG/AlG/GaG. Then, 10 derivatives adsorption on AlG were reported, and the adsorption energy increased in the order of pentachlorophenol [Formula: see text] 2,4,6-trichlorophenol [Formula: see text] 2,4-dichlorophenol [Formula: see text] p-cresol [Formula: see text] m-cresol [Formula: see text] phenol [Formula: see text] o-chlorophenol [Formula: see text] o-cresol [Formula: see text] 2,4,6-trintrotoluene [Formula: see text] para-nitrophenol. The interaction between these derivatives and the substrate was chemisorption for AlG and physisorption for pG. The oxygen atom in nitro group was more closer to the substrate than in hydroxyl group about optimized structures.

Toxicity of graphene oxide to white moss Leucobryum glaucum

Graphene oxide was toxic to white moss Leucobryum glaucum.