Antimicrobial behavior of biosynthesized silica-silver nanocomposite for water disinfection: a mechanistic perspective

Design and Fabrication of Broad-Spectrum Antimicrobial Porous Metallo-Polymeric Microsphere for Water Disinfection

An expedient and efficient approach is used to synthesize a new class of metallo-polymeric microspheres (MPMs) as antimicrobials to succumb the wide range of bacteria from water. Three types of MPMs, that is, poly[Silver (I)-methacrylate-co-methylmethacrylate] (pAgMA), poly[Copper (II)-methacrylate-co-methyl methacrylate] (pCuMA), and poly[Nickel (II)-methacrylate-co-methylmethacrylate] (pNiMA), are prepared via radical suspension polymerization technique in 3D shape with porous texture. The structural and morphological characterization of the prepared microspheres are examined by analytical techniques. The antimicrobial potentialities of prepared MPMs are investigated at the laboratory scale study, revealing that the MPMs exhibit strong antibacterial activity (≈99.9% killing) against Gram-negative and Gram-positive bacteria [Enterobacter hormaechei (EH), Bacillus megatarium (BM), and Bacillus bataviensis (BB)]. The MacConkey agar medium test reveals that MPMs have substantial biocidal efficacy against broad-spectrum Gram-negative bacteria present in tap water. The MPMs exhibit significant antimicrobial efficacy via contact killing owe to the presence of integrated biocidal metal moiety, which represents that the MPMs are safe for water disinfection.

Pseudomonas aeruginosa and related antibiotic resistance genes as indicators for wastewater treatment

This review aims to examine the existence of Pseudomonas aeruginosa (P. aeruginosa) and their antibiotic resistance genes (ARGs) in aquatic settings and the alternative treatment ways. P. aeruginosa in a various aquatic environment have been identified as contaminants with impacts on human health and the environment. P. aeruginosa resistance to multiple antibiotics, such as sulfamethoxazole, ciprofloxacin, quinolone, trimethoprim, tetracycline, vancomycin, as well as specific antibiotic resistance genes including sul1, qnrs, blaVIM, blaTEM, blaCTX, blaAIM-1, tetA, ampC, blaVIM. The development of resistance can occur naturally, through mutations, or via horizontal gene transfer facilitated by sterilizing agents. In addition, an overview of the current knowledge on inactivation of Pseudomonas aeruginosa and ARG and the mechanisms of action of various disinfection processes in water and wastewater (UV chlorine processes, catalytic oxidation, Fenton reaction, and ozonation) is given. An overview of the effects of nanotechnology and the resulting wetlands is also given.

Recent advances and new insights on the construction of photocatalytic systems for environmental disinfection

Photocatalysis, as a sustainable and environmentally friendly green technology, has garnered widespread recognition and application across various fields. Especially its potential in environmental disinfection has been highly valued by researchers. This study commences with foundational research on photocatalytic disinfection technology and provides a comprehensive overview of its current developmental status. It elucidates the complexity of the interface reaction mechanism between photocatalysts and microorganisms, providing valuable insights from the perspectives of materials and microorganisms. This study reviews the latest design and modification strategies (Build heterojunction, defect engineering, and heteroatom doping) for photocatalysts in environmental disinfection. Moreover, this study investigates the research focuses and links in constructing photocatalytic disinfection systems, including photochemical reactors, light sources, and material immobilization technologies. It studies the complex challenges and influencing factors generated by different environmental media during the disinfection process. Simultaneously, a comprehensive review extensively covers the research status of photocatalytic disinfection concerning bacteria, fungi, and viruses. It reveals the observable efficiency differences caused by the microstructure of microorganisms during photocatalytic reactions. Based on these influencing factors, the economy and effectiveness of photocatalytic disinfection systems are analyzed and discussed. Finally, this study summarizes the current application status of photocatalytic disinfection products. The challenges faced by the synthesis and application of future photocatalysts are proposed, and the future development in this field is discussed. The potential for research and innovation has been further emphasized, with the core on improving efficiency, reducing costs, and strengthening the practical application of photocatalysis in environmental disinfection.

Antibacterial, antibiofilm and larvicidal activity of silver nanoparticles synthesized from spider silk protein

Green synthesis of silver nanoparticles has gained attention due to its simple process of synthesis and varied applications. Scientists have tried its synthesis from a wide range of materials, but there is lack of reports that can use the metabolites of insects. Here in this study, we have used the spider silk protein which is considered as complete waste collected from household and field sources and processed to synthesize silver nanoparticles which were subsequently analyzed using different analytical tools like SEM, TEM, FTIR, and XRD. The spider silk protein-mediated synthesized nanoparticle (SP-AgNPs) showed a sharp peak at 420 nm when analyzed spectrophotometrically giving an indication of successful synthesis of AgNP. The synthesized nanoparticle ranges from 10 to 40 nm and were of varied shapes. The synthesized SP-AgNPs showed remarkable antibacterial activity. The MIC values against B. subtilis and E. coli were recorded 45 and 40 μg/mL respectively. Further to know the mechanisms of antibacterial activity protein leakage and conductivity measurement were conducted. The synthesized nanoparticle also showed excellent antibiofilm activity with inhibition percentages of 74 % and 68 % for E. coli and B. subtilis respectively at MIC concentration of the treatment. Finally, the synthesized nanoparticles was applied as mosquito larvicidal agent against Culex sp. and the difference between LC50 and LD90 value was recorded as statistically significant (p < 0.0267) during 24 h of incubation. Therefore, it can be said that spider-web could be an excellent biological reducing and capping agent for heavy metal nanoparticle synthesis that can minimize the ailments caused by mosquitoes and pathogenic microorganisms.

Biosynthesis and characterization of silver nanoparticles from Punica granatum (pomegranate) peel waste and its application to inhibit foodborne pathogens

Polyphenolics have been predicted to effectively develop antimicrobial agents for the food industry as food additives and promote human health. This study aims to synthesize pomegranate peel extract (PPE) with silver nanoparticles (AgNPs) against eight foodborne pathogens. Multispectroscopic analysis of UV-vis spectroscopy, Zeta potential, Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) analysis were used to characterize the interaction between PPE and AgNPs. Eight foodborne pathogenic strains (six bacterial and two fungal strains) Bacillus subtilis ATCC 6633, Enterococcus faecalis ATCC 29212, Escherichia coli ATCC 8379, Klebsiella pneumoniae ATCC 00607, Salmonella typhi DSM 17058, Shigella sonnei DSM 5570, Aspergillus flavus ATCC 9643, and Rhizopus oryzae ATCC 96382 were used to test the inhibitory potential of PPW-AgNPs. The reaction colour of PPE-AgNPs from yellow to brown indicated that the nanoparticles were successfully formed. The UV absorption of PPE-AgNPs was detected at 440 nm of 0.9 SPR. SEM image of PPE-AgNPs exhibited spherical shapes with a zeta potential of - 20.1 mV. PPE-AgNPs showed high antimicrobial activity against all tested strains. The highest inhibition activity of PPE-AgNPs was recorded for the B. subtilis strain followed by K. pneumonia, while the highest resistance was noticed for R. oryzae. The components of pomegranate peel were analyzed using gas chromatography-mass spectrometry (GC-MS). The major constituents of pomegranate peel is phenol (51.1%), followed by Isocitronellol (19.41%) and 1-Propanol, 2-(2-hydroxypropyl)- (16.05%). PPE is key in the simple, eco-friendly green synthesis of extracellular stable AgNPs as an alternative source for harmful chemical disinfectants.

Synthesis, characterization and optimization of chicken bile-mediated silver nanoparticles: a mechanistic insight into antibacterial and antibiofilm activity

The fast-growing urbanization and slow progress in the field of waste management have led to the accumulation of large quantities of animal wastes. The present work focused on the synthesis of low-cost and eco-friendly chicken bile juice-mediated silver nanoparticles (BJ-AgNP). Results reveal that bile juices have enough potentiality towards the synthesis of almost uniform sizes (average size < 50 nm) of BJ-AgNPs which remains stable for more than 6 months. Response surface methodology (RSM) successfully demonstrated the optimised condition of BJ-AgNP synthesis. Factors like concentration of salt and bile extract and temperature are significantly responsible for nanoparticle synthesis. The synthesis of nanoparticle was further characterized using UV-Vis, TEM, FESEM, XRD, FTIR, TGA, and EDS. The synthesised nanoparticle showed excellent bactericidal activity against both Gram positive and Gram negative bacteria with MIC and MBC of 40 and 50 μg/mL for Bacillus subtilis (MTCC-441) and 60 and 60 μg/mL for Eschecheria coli (MTCC-1687) respectively. The synthesised nanoparticle also exhibited as an antibiofilm activity against B. subtilis, with ~89% biofilm inhibition efficacy at 4 X MIC, having optimal bacterial concentration of 10⁶ CFU/mL. Therefore, the present findings clearly demonstrated that an absolute animal waste could be a valuable ingredient in the field of therapeutic nanoscience.

High performance flexible and antibacterial strain sensor based on silver‑carbon nanotubes coated cellulose/polyurethane nanofibrous membrane: Cellulose as reinforcing polymer blend and polydopamine as compatibilizer

In this study, ethyl cellulose was used as the second-phase polymer blended with polyurethane to make nanofibrous membrane as antibacterial strain sensor. The results indicated that ethyl cellulose could regulate the morphology of polyurethane through strong hydrogen bonding, which observably enhanced the nanofiber uniformity of polyurethane. Furthermore, rigid cellulose also remarkably improved the mechanical strength and thermal stability of the nanofibrous membrane. After being coated with silver nanoparticles and carbon nanotubes assisted by polydopamine (PDA), the membrane with outstanding bacteria inhibition performance exhibited outstanding sensitivity toward external mechanical stretching, as well as real-time motion of human body parts. The conductive composite membrane possessed sensitive and regular resistance feedback to 100 cycles of varied human motions. The cellulose in the nanofiber structure ensured the shape recovery and longtime use stability of the membrane. This study proposed a novel thinking for the construction of high performance strain sensor by rational introduction of rigid polysaccharide into the polymer matrix.

Silica-Gel Incorporated Biosynthesized-Silver Nanoparticles for Sustainable Antimicrobial Treatment of Brackish Water Aquaculture

Treatment of brackish water from pathogenic microbes is crucial for sustainable aquaculture production and preventing the spread of infectious diseases. However, the treatment of brackish water is still challenging due to the high salinity and the high antimicrobial resistance. Here, we exploit a facile and effective approach to synthesize silica gel embedded with silver nanoparticles (7–48 nm) for broad-spectrum antimicrobial activity. The incorporation of silver nanoparticles into silica gel (AgNPs@SG) is confirmed by flame atomic absorption spectrometry, X-ray diffraction, N2 physisorption, and transmission electron microscopy. The AgNPs@SG material exhibits wide-spectrum antimicrobial activity against the studied microorganisms (Pseudomonas aeruginosa, Escherichia coli, and Candida albicans) due to preventing the aggregation of silver nanoparticles and their effective contact with the microorganisms. Most importantly, the applicability of the synthesized AgNPs@SG for the microbial treatment of brackish water is investigated on different water samples collected from Manzala Lake. Remarkably, the amount of viable bacteria in the brackish water decreases by about 93% using AgNPs@SG material that not only combats antibiotic-resistant strains but also works under harsh conditions such as multiple-source contamination, high eutrophic state, and salinity.

Silver nanoparticles anchored magnetic self-assembled carboxymethyl cellulose-ε-polylysine hybrids with synergetic antibacterial activity for wound infection therapy

The severe bacterial infection and chronic wound healing caused by the abuse of antibiotics threaten the public health, which calls the need for the development of novel antibacterial agents and alternative therapeutic strategies. Herein, magnetic carboxymethyl cellulose-ε-polylysine hybrids (FCE) were synthesized via a facile one-pot coprecipitation method and further used as matrix to anchor silver nanoparticles (Ag NPs). The as-resulted Ag/FCE hybrids were employed to inactivate pathogenic bacteria and accelerate bacteria-infected wound healing with the assistance of H₂O₂. In vitro investigation revealed the combination of hydroxyl radical (·OH) originated from low concentration of H₂O₂ catalyzed by Ag/FCE and the antimicrobial activity of Ag NPs endowed effective antibacterial performance to the hybrids against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Investigation on antibacterial mechanism indicated antibacterial activity of the synergetic strategy was achieved by destroying bacterial cell integrity, arresting metabolic, producing intracellular ROS, and oxidizing GSH. Additionally, in vivo assay exhibited Ag/FCE possessed satisfactory biocompatibility and effectively accelerated S. aureus-infected wound healing with the presence of low concentration of H₂O₂. Altogether, the presented results supported the great potential application of the synergistic antibacterial strategy for the therapy of bacterial-infected wound healing.

Recent Advances and Mechanistic Insights into Antibacterial Activity, Antibiofilm Activity, and Cytotoxicity of Silver Nanoparticles

The substantial increase in multidrug-resistant (MDR) pathogenic bacteria is a major threat to global health. Recently, the Centers for Disease Control and Prevention reported possibilities of greater deaths due to bacterial infections than cancer. Nanomaterials, especially small-sized (size ≤10 nm) silver nanoparticles (AgNPs), can be employed to combat these deadly bacterial diseases. However, high reactivity, instability, susceptibility to fast oxidation, and cytotoxicity remain crucial shortcomings for their uptake and clinical application. In this review, we discuss various AgNPs-based approaches to eradicate bacterial infections and provide comprehensive mechanistic insights and recent advances in antibacterial activity, antibiofilm activity, and cytotoxicity (both in vitro and in vivo) of AgNPs. The mechanistic of antimicrobial activity involves four steps: (i) adhesion of AgNPs to cell wall/membrane and its disruption; (ii) intracellular penetration and damage; (iii) oxidative stress; and (iv) modulation of signal transduction pathways. Numerous factors affecting the bactericidal activity of AgNPs such as shape, size, crystallinity, pH, and surface coating/charge have also been described in detail. The review also sheds light on antimicrobial photodynamic therapy and the role of AgNPs versus Ag⁺ ions release in bactericidal activities. In addition, different methods of synthesis of AgNPs have been discussed in brief.

Fabrication of Epsilon-Polylysine-Based Magnetic Nanoflowers with Effective Antibacterial Activity against Alicyclobacillus acidoterrestris

The risk of fruit juice contamination caused by microorganisms, especially Alicyclobacillus acidoterrestris, has been reported worldwide. To develop cost-effective control methods, in this work, flower-like magnetic molybdenum disulfide (Fe₃O₄@MoS₂) nanoparticles (NPs) were fabricated by a facile two-step hydrothermal method. After further modifying polyacrylic acid (PAA) on the surface of the NPs, epsilon-polylysine (EPL) was immobilized via N-(3-dimethylaminopropyl)-N-carbodiimide hydrochloride/N-hydroxysuccinimide coupling reaction to obtain the Fe₃O₄@MoS₂@PAA-EPL nanocomposites. Antibacterial results exhibited that the synthesized nanocomposites showed effective antibacterial activity against A. acidoterrestris with a minimum inhibitory concentration of 0.31 mg mL^-1. Investigation on the antibacterial mechanism revealed that the presence of nanocomposites caused damage and disruption of the bacterial membrane through dent formation, resulting in the leakage of intracellular protein. Moreover, the activity of dehydrogenase enzymes was inhibited with the treatment of Fe₃O₄@MoS₂@PAA-EPL, causing the reduction of metabolic activity and adenosine triphosphate levels in bacteria. Simultaneously, the presence of nanocomposites improved intracellular reactive oxygen species levels, and this disrupted the antioxidant defense system and caused oxidative damage to bacteria. Furthermore, Fe₃O₄@MoS₂@PAA-EPL nanocomposites were confirmed to possess satisfactory biocompatibility by performing in vitro cytotoxicity and in vivo acute toxicity experiments. The aim of this research was to develop a new pathway for the inhibition of A. acidoterrestris in the juice industry.

Antimicrobial Mechanisms of Biomaterials: From Macro to Nano

Overcoming the global concern of antibiotic resistance is one of the biggest challenge faced by scientists today and the key to tackle this issue of emerging infectious diseases is the...

Bismuth telluride functionalized bismuth oxychloride used for enhancing antibacterial activity and wound healing efficacy with sunlight irradiation

Bacterial infection can lead to chronic non-healing wounds and serious tissue damage. The wound healing process could be accelerated through bacterial inactivation using some semiconductor nanomaterials with the irradiation of light. Herein, we develop sunlight triggered bismuth telluride-bismuth oxychloride heterostructure nanosheets as antibacterial agents for promoting wound healing, in which bismuth telluride can effectively narrow the bandgap of bismuth oxychloride, resulting in more sunlight absorption and higher antibacterial activity. In fact, the bandgap of bismuth oxychloride has been narrowed from 3.25 eV to 2.37 eV as proved by ultraviolet-visible diffuse reflectance spectroscopy. With simulated sunlight irradiation, bismuth telluride-bismuth oxychloride nanosheets could effectively produce reactive oxygen species and inhibit the growth of both Gram-positive and Gram-negative bacteria. In vivo experiments further confirmed the excellent wound healing capability of bismuth telluride-bismuth oxychloride nanosheets. This work may provide a facile strategy for designing sunlight triggered bacterial inactivation agents.

Long-term, synergistic and high-efficient antibacterial polyacrylonitrile nanofibrous membrane prepared by "one-pot" electrospinning process

Enhancing long-term antibacterial activity of membrane materials is an effective strategy to reduce biological contamination. Herein, we developed a long-term, synergistic antibacterial polyacrylonitrile (PAN) nanofiber membrane by a "one-pot" electrospinning process. In the reaction solution of PAN and N, N-dimethylformamide (DMF), silver-silicon dioxide nanoparticles (Ag@SiO₂ NPs) are in-situ synthesized and stabilized using silane coupling agent; and [2-(methacryloyloxy)-ethyl] trimethylammonium chloride (MT) monomers are then in-situ cross-linked to obtain a polyquaternary ammonium salt (PMT). Subsequently, the casting solution is directly used to fabricate Ag@SiO₂/PMT-PAN nanofibrous membrane (NFM) via electrospinning. The antibacterial activity, reusability, synergy effect and biological safety of the Ag@SiO₂/PMT-PAN NFM are systematically investigated, and the synergistic antibacterial mechanism is also explored. Even at very low (0.3 wt%) content of silver, the Ag@SiO₂/PMT-PAN NFM exhibits excellent antibacterial activity against E. coli (99%) and S. aureus (99%). Also, the antibacterial ability of the NFM remains the same level after three cycles of antibacterial processes with the efficient synergy effects of Ag@SiO₂ and PMT components. When the Ag@SiO₂/PMT-PAN contacts with bacteria, the PMT attracts and kills the bacteria through electrostatic action. The bacteria with damaged cell membranes are deposited on the nanofibrous membrane, which could greatly promote the release of Ag⁺ and further enhance the antibacterial activity. Moreover, L929 fibroblasts are co-cultured with the extract of 4 mg/mL Ag@SiO₂/PMT-PAN for 5 days, which exhibits a low cytotoxicity with a cell proliferation ratio of 95%. This work opens new pathways for developing long-term effective and synergistic antibacterial nanofibrous membrane materials to prevent infections associated with biomedical equipment.

Antibacterial and Antibiofouling Activities of Antimicrobial Peptide-Functionalized Graphene-Silver Nanocomposites for the Inhibition and Disruption of Staphylococcus aureus Biofilms

Owing to the emergence of antibiotic-resistant strains, bacterial infection and biofilm formation are growing concerns in healthcare management. Herein, we report an eco-benign strategy for the synthesis and functionalization of graphene-silver (rGOAg) nanocomposites with an antimicrobial peptide (AMP) for the treatment of Staphylococcus aureus infection. The synthesis of rGOAg nanocomposites was carried out by simple microwave reduction, and the as-synthesized rGOAg was covalently functionalized with an AMP. As a natural AMP, poly-l-lysine (PLL) functionalization of rGOAg enhanced the antibacterial efficacy and target specificity against the S. aureus biofilm. The robust bactericidal efficiency and biofilm disruption by AMP-functionalized rGOAg (designated as GAAP) occurred through the "contact-kill-release" mode of action, where the electrostatic interaction with bacterial cells together with intracellular ROS generation induced physical disruption to the cell membrane. The internalization of GAAP into the cytoplasm through the damaged cell membrane caused an outburst of intracellular proteins and DNA. Crystal violet staining along with fluorescence and confocal microscopic images showed an effective inhibition and disruption of the S. aureus biofilm upon treatment with GAAP. PLL functionalization also prevented the dissolution of Ag⁺ ions and thereby minimized the in vitro toxicity of GAAP to the 3 T6 fibroblast and human red blood cells. The ex vivo rat skin disinfection model further demonstrated the potency of GAAP in eliminating the biofilm formation and disruption of the S. aureus biofilm. The obtained results demonstrated a general approach for designing a functional nanocomposite material to disrupt the mature biofilm and provided a promising strategy for treating bacterial infection.

Visible-light-driven photocatalytic inactivation of S. aureus in aqueous environment by hydrophilic zinc oxide (ZnO) nanoparticles based on the interfacial electron transfer in S. aureus/ZnO composites

Waterborne diseases caused by pathogenic microorganisms pose severe threats to human health. ZnO nanoparticles (NPs) hold great potentials as an effective, economical and eco-friendly method for water disinfection, but the exact antimicrobial mechanism of ZnO NPs under visible-light illumination is still not clear. Herein, we investigate the visible-light-driven photocatalytic inactivation mechanism of amino-functionalized hydrophilic ZnO (AH-ZnO) NPs against Staphylococcus aureus (S. aureus) in aqueous environment from the perspective of electron transfer theory. The results show that the antibacterial effects of AH-ZnO NPs are dependent on the AH-ZnO NPs concentration and treatment time. The bulk ORP value and released Zn²⁺ concentration in AH-ZnO NPs solutions increase with AH-ZnO NPs concentration. The SEM and intracellular protein leakage results indicate that AH-ZnO NPs can adhere to S. aureus surface without causing obvious cell membrane disruption. The photoluminescence (PL) intensity and fluorescence lifetime of AH-ZnO NPs are remarkedly decreased after adding S. aureus, which confirms the electron transfer from S. aureus to AH-ZnO NPs. Moreover, the ΔPL intensity is closely correlated with the inactivation efficiency, demonstrating that the interfacial electron transfer in S. aureus/AH-ZnO NPs composites contributes to the antibacterial activity, which is speculated to disrupt the normal respiratory electron transfer chain of S. aureus, thereby causing intracellular ROS generation, cell membrane depolarization and eventually apoptosis-like death.

Antibacterial mechanism and transcriptome analysis of ultra-small gold nanoclusters as an alternative of harmful antibiotics against Gram-negative bacteria

In this work, a well-known Au₂₅ NCs with high purity was prepared by simple one-pot reducing method. The as-synthesized Au₂₅ NCs exhibited excellent antibacterial efficiency toward Gram-negative bacteria in a dose- and time-dependent manner, which could be used as nanoantibiotics to replace harmful antibiotics. The antibacterial assays showed that almost 100% bacteria were killed at lower concentration (100-150 μM) within a short time (30-60 min), providing a rapid and effective killing outcome for Gram-negative bacteria. After that, antibacterial mechanism was mainly investigated at cellular level via destruction of membrane integrity, disruption of antioxidant defense system, metabolic inactivation, DNA damage, as well as at molecular level via transcriptome analysis (RNA sequencing) for the first time. RNA sequencing results showed that differentially expressed genes (DEGs) related to biosynthesis of cell wall and membrane, glycolysis and TCA cycle, oxidative phosphorylation and DNA replication and repair were significantly affected. It was concluded that synergetic effect of membrane damage, oxidative stress, DNA damage and energy metabolism eventually led to the Gram-negative bacteria growth inhibition and death.

Discovery of novel purinylthiazolylethanone derivatives as anti-Candida albicans agents through possible multifaceted mechanisms

An unprecedented amount of fungal and fungal-like infections has recently brought about some of the most severe die-offs and extinctions due to fungal drug resistance. Aimed to alleviate the situation, new effort was made to develop novel purinylthiazolylethanone derivatives, which were expected to combat the fungal drug resistance. Some prepared purinylthiazolylethanone derivatives possessed satisfactory inhibitory action towards the tested fungi, among which compound 8c gave a MIC value of 1 μg/mL against C. albicans. The active molecule 8c was able to kill C. albicans with undetectable resistance as well as low hematotoxicity and cytotoxicity. Furthermore, it could hinder the growth of C. albicans biofilm, thus avoiding the occurrence of drug resistance. Mechanism research manifested that purinylthiazolylethanone derivative 8c led to damage of cell wall and membrane disruption, so protein leakage and the cytoplasmic membrane depolarization were observed. On this account, the activity of fungal lactate dehydrogenase was reduced and metabolism was impeded. Meanwhile, the increased levels of reactive oxygen species (ROS) and reactive nitrogen species (RNS) disordered redox equilibrium, giving rise to oxidative damage to fungal cells and fungicidal effect.

Zero-valent iron nanomaterial Fe0@Fe2MnO4 for ultrasensitive electroanalysis of As(iii): Fe0 influenced surficial redox potential

A novel zero-valent iron nanomaterial (Fe⁰@Fe₂MnO₄) was synthesized and achieved an ultrasensitive electrochemical detection of As(iii). It was found that the enhanced sensitivity is attributed to the surficial catalytic redox couple Fe(ii)/Fe(iii) induced by Fe⁰ of Fe⁰@Fe₂MnO₄. Besides, the catalytic kinetics was modelled and simulated, and the strong influence of the oxidation potential of the catalytic redox species on sensitivity was revealed. By tailoring the surficial atomic and electronic structures of the material, the redox potential can be altered, which can be used for controlling the electro-sensitivity and selectivity in electroanalysis.

Destroying antimicrobial resistant bacteria (AMR) and difficult, opportunistic pathogen using cavitation and natural oils/plant extract

The present study reports, for the first time, a new and techno-economic strategy for effective removal of antimicrobial resistant bacteria (AMR) and difficult, opportunistic pathogen using cavitation and natural oils/plant extract. A hybrid methodology using natural oils of known health benefits has been discussed in combination with conventional physico-chemical method of hydrodynamic cavitation that not only provides efficient and effective water disinfection, but also eliminates harmful effects of conventional methods such as formation of disinfection by-products apart from reducing cost of treatment. A proof-of concept is demonstrated by achieving exceptionally high rates for practically complete removal of antimicrobial resistant (AMR) and relatively less researched, gram-negative opportunistic pathogen, Pseudomonas aeruginosa and gram-positive methicillin resistant, Staphylococcus aureus using a natural oil-Peppermint oil and two different cavitating reactors employing vortex flow (vortex diode) and linear flow (orifice) for hydrodynamic cavitation. >99% disinfection could be obtained, typically in less than 10 min, using vortex diode with operating pressure drop of 1 bar and low dose of 0.1% peppermint oil as an additive, depicting very high rates of disinfection. The rate of disinfection can be further increased by using simple aeration which can result in significant lowering of oil dose. The conventional device, orifice requires relatively higher pressure drop of 2 bar and comparatively more time (~20 min) for disinfection. The cost of the disinfection was also found to be significantly lower compared to most conventional processes indicating techno-economic feasibility in employing the developed hybrid method of disinfection for effectively eliminating bacteria including AMR bacteria from water. The developed approach not only highlights importance of going back to nature for not just conventional water disinfection, but also for eliminating hazardous AMR bacteria and may also find utility in many other applications for the removal of antimicrobial bacteria.

Synthesis, characteristics and medical applications of plant nanomaterials

The recent preparations of metal nanoparticles using plant extracts as reducing agents are summarized here. The synthesis and characterization of plant-metal nanomaterials and the progress in antibacterial and anti-inflammatory medical applications are detailed, providing a new vision for plant-based medical applications. The medical application of plant-metal nanoparticles is becoming a research hotspot. Compared with traditional preparation methods, the synthesis of plant-metal nanoparticles is less toxic and more eco-friendly, increasing application potential. Highly efficient plant-metal nanoparticles are usually smaller than 100 nm. This review describes the synthesis, characterization and bioactivities of gold- and silver-plant nanoparticles as examples and clearly explained their antibacterial and anticancer mechanisms. An analysis of actual cases shows that the synthetic method and type of plant extract affect the activities of the products.

Advances in Biodegradable 3D Printed Scaffolds with Carbon-Based Nanomaterials for Bone Regeneration

Bone possesses an inherent capacity to fix itself. However, when a defect larger than a critical size appears, external solutions must be applied. Traditionally, an autograft has been the most used solution in these situations. However, it presents some issues such as donor-site morbidity. In this context, porous biodegradable scaffolds have emerged as an interesting solution. They act as external support for cell growth and degrade when the defect is repaired. For an adequate performance, these scaffolds must meet specific requirements: biocompatibility, interconnected porosity, mechanical properties and biodegradability. To obtain the required porosity, many methods have conventionally been used (e.g., electrospinning, freeze-drying and salt-leaching). However, from the development of additive manufacturing methods a promising solution for this application has been proposed since such methods allow the complete customisation and control of scaffold geometry and porosity. Furthermore, carbon-based nanomaterials present the potential to impart osteoconductivity and antimicrobial properties and reinforce the matrix from a mechanical perspective. These properties make them ideal for use as nanomaterials to improve the properties and performance of scaffolds for bone tissue engineering. This work explores the potential research opportunities and challenges of 3D printed biodegradable composite-based scaffolds containing carbon-based nanomaterials for bone tissue engineering applications.

Fabrication of Chitosan-Reinforced Multifunctional Graphene Nanocomposite as Antibacterial Scaffolds for Hemorrhage Control and Wound-Healing Application

Accidents on battlefields and roads often lead to hemorrhage and uncontrolled bleeding. Hence, immediate hemorrhage control remains of great importance to reduce mortality and socioeconomic loss. Herein, nanobiocomposite scaffolds (film and sponge) have been fabricated for the first time through the incorporation of a graphene-silver-polycationic peptide (GAP) nanocomposite into chitosan (Cs). Ten different scaffolds viz. Cs, Cs-GAP25, Cs-GAP50, Cs-GAP75, and Cs-GAP100 were prepared in the form of films and sponges. Cs-GAP100 nanobiocomposite sponge exhibited excellent porosity, fluid absorption, and blood clotting capacity, whereas Cs-GAP100 nanobiocomposite film showed excellent mechanical strength and poor degradation property. The presence of graphene in GAP provided a unique mechanical property and prevented the natural degradation, whereas silver nanoparticles and polycationic peptide provided an efficient antimicrobial property to the scaffolds. The high surface area of graphene and the hydrophilic nature of the polycationic peptide also imparted high fluid and blood absorption capacity to Cs-GAP nanobiocomposite scaffolds. The in vitro whole blood clotting assay demonstrated that clotting efficacy improved with the concentration of GAP nanocomposite and Cs-GAP100 nanobiocomposite sponge significantly (p value <0.003) reduced the clotting time to 60 s, as compared to the pristine chitosan dressings. On the other side, the Cs-GAP100 nanobiocomposite film showed an excellent wound-healing property. The Cs-GAP100 nanobiocomposite demonstrated profound antibacterial activity against Escherichia coli and Staphylococcus aureus. The intracellular reactive oxygen species (ROS) assay explained the interfacial interaction of Cs-GAP100 nanobiocomposite and bacterial cells, resulting in cell damage and finally cell death. The obtained information thus provided a novel safe-by-design concept for fabrication of Cs-GAP100 nanobiocomposite scaffolds and demonstrated potential development of antibacterial hemostatic and wound dressing in traumacare management.

Green Synthesis of Gold and Silver Nanoparticles Using Leaf Extract of Clerodendrum inerme; Characterization, Antimicrobial, and Antioxidant Activities

Due to their versatile applications, gold (Au) and silver (Ag) nanoparticles (NPs) have been synthesized by many approaches, including green processes using plant extracts for reducing metal ions. In this work, we propose to use plant extract with active biomedical components for NPs synthesis, aiming to obtain NPs inheriting the biomedical functions of the plants. By using leaves extract of Clerodendrum inerme (C. inerme) as both a reducing agent and a capping agent, we have synthesized gold (CI-Au) and silver (CI-Ag) NPs covered with biomedically active functional groups from C. inerme. The synthesized NPs were evaluated for different biological activities such as antibacterial and antimycotic against different pathogenic microbes (B. subtilis, S. aureus, Klebsiella, and E. coli) and (A. niger, T. harzianum, and A. flavus), respectively, using agar well diffusion assays. The antimicrobial propensity of NPs further assessed by reactive oxygen species (ROS) glutathione (GSH) and FTIR analysis. Biofilm inhibition activity was also carried out using colorimetric assays. The antioxidant and cytotoxic potential of CI-Au and CI-Ag NPs was determined using DPPH free radical scavenging and MTT assay, respectively. The CI-Au and CI-Ag NPs were demonstrated to have much better antioxidant in terms of %DPPH scavenging (75.85% ± 0.67% and 78.87% ± 0.19%), respectively. They exhibited excellent antibacterial, antimycotic, biofilm inhibition and cytotoxic performance against pathogenic microbes and MCF-7 cells compared to commercial Au and Ag NPs functionalized with dodecanethiol and PVP, respectively. The biocompatibility test further corroborated that CI-Ag and CI-Au NPs are more biocompatible at the concentration level of 1–50 µM. Hence, this work opens a new environmentally-friendly path for synthesizing nanomaterials inherited with enhanced and/or additional biomedical functionalities inherited from their herbal sources.

Silver nanoparticle and Ag+-induced shifts of microbial communities in natural brackish waters: Are they more pronounced under oxic conditions than anoxic conditions?

With the burst of silver nanoparticles (AgNPs) applications, their potential entry into the environment has attracted increasing concern. To date, researches about the impacts of AgNPs on microbial communities have been scarcely conducted in the brackish waters. Here, the effects of interactions of AgNPs and Ag⁺ (as a positive control) with dissolved oxygen on natural brackish water microbial communities were investigated for 30 d. The introduction of AgNPs and Ag⁺ in natural brackish waters resulted in distinct bacterial community composition and structure as well as reduction of the richness and diversity, effects that were not eliminated completely during the tested periods. Anoxic conditions could attenuate the effects of AgNPs and Ag⁺ on the community, and dissolved oxygen made more contributions to community compositions for short-term exposure. High doses of AgNPs had more pronounced long-term impacts than Ag⁺ amendment. Compared with the controls, two general AgNP and Ag⁺ responses, namely, sensitivity and resistance, were observed. Sensitive species mainly included those of the genera Synechococcus and unclassified_f_Rhodobacteraceae, while resistant species mostly belonged to the phylum Bacteroidetes and participated in carbon metabolic processes. Our results indicated that the microbial communities that were involved in nutrient cycles (such as carbon, nitrogen, and sulfide) and photoautotrophic bacteria that contained bacteriochlorophyll were adversely affected by AgNPs and Ag⁺. In addition, dissolved oxygen could further change the microbial communities. These results implied that under different oxygen conditions AgNPs possibly resulted in varying microbial survival strategies and affected the biogeochemical cycling of nutrients in natural brackish waters.

Analysis of Neutral Electrolyzed Water anti-bacterial activity on contaminated eggshells with Salmonella enterica or Escherichia coli

Neutral Electrolyzed Water (NEW) was tested in vitro and on artificially contaminated eggs against Salmonella enterica subsp. enterica or Escherichia coli. The antibacterial effect was measured 30 s after treatment. NEW microbicide activity results were compared against 2% citric acid and 0.9% saline solutions. NEW caused an in vitro decrease in Salmonella titers by ˃5.56 Log₁₀ CFU mL^-1 and in artificially contaminated eggs by ˃1.45 Log₁₀ CFU/egg. When it was tested against E. coli, it decreased in vitro bacterial titers by ˃3.28 Log₁₀ CFU mL^-1 and on artificially contaminated eggs by ˃6.39 Log₁₀ CFU/egg. The 2% citric acid solution caused an in vitro decrease of 0.4 Log₁₀ CFU mL^-1 of Salmonella and E. coli and on eggs artificially contaminated with E. coli or Salmonella there was a decrease of 0.06 and 0.62 Log₁₀ CFU/egg respectively. We evaluated egg cuticle integrity by scanning electron microscopy after treatments with evaluated solutions; the 2% citric acid solution caused damage to the cuticle and exposed eggshell pores and no interaction of NEW or NaCl with the cuticle was observed. NEW treatment showed a fast-bactericidal effect in vitro and table eggs.

Antimicrobial activity of silver salt and silver nanoparticles in different forms against microorganisms of different taxonomic groups

The development of antiseptics and medical products (bandaging materials, sponges, etc.) based on silver nanoparticles is an essential task due to the growing resistance of pathogenic microorganisms to medicines long used in clinical practice. Using silver nanoparticles for the same purpose is promising, but the potential hazards and cumulative effects in the application of nanoparticles requires a thorough study of those materials. To evaluate the efficiency of antiseptics and medical products based on silver nanoparticles, it is necessary to conduct an in-depth study of the activity of silver nanoparticles in different forms and immobilized in carriers. The study examines the resistance of bacterial and fungal cultures to silver nanoparticles produced by chemical reduction and microbiological synthesis. The study of resistance was carried out in different growth phases of pathogenic microorganisms and in both liquid and solid media. Chemically and microbiologically synthesized nanoparticles were added in the form of a suspension, as well as encapsulated in chitosan-PVA matrices. It was experimentally discovered that, depending on the medium and form of the silver, the antibacterial effect would significantly differ due to changes in the mechanisms regarding the release of nanoparticles and their activity against the cells of pathogenic and potentially pathogenic microorganisms.

Encapsulation of Biosynthesized Nanosilver in Silica Composites for Sustainable Antimicrobial Functionality

Silver nanoparticles (AgNPs) have become known as a broad-spectrum antimicrobial agent. The antimicrobial activity of AgNPs is dependent on the particle size and the dispersion status. In this study, a simple and effective approach is developed for sequestering the biosynthesized AgNPs in silica composites during the gel formation of MCM-41. Composites with different Ag concentrations of 0.034% (Ag1@MCM-41), 0.151% (Ag2@MCM-41), and 0.369% (Ag3@MCM-41) are synthesized and then heated at 400 °C to produce Ag1@MCM-41H, Ag2@MCM-41H, and Ag3@MCM-41H, respectively. The samples are characterized by flame atomic absorption spectrometry, Fourier-transform infrared spectroscopy, X-ray diffraction, N2 physisorption, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. The AgNPs are confirmed to be highly dispersed in the amorphous silica framework. The antimicrobial activity of the AgNP-silica samples is investigated against Staphylococcus aureus, Escherichia coli, and Candida albicans using the cup-plate and the plate-count techniques. The results show an excellent antimicrobial effect of these samples against the studied microorganisms. Importantly, the AgNP-silica samples are found to be stable up to 58 months under ambient conditions. These stable and powerful antimicrobial composites provide a more practical and effective strategy for combating biomedical pathogens and public health threats.

Facile synthesis, biofilm disruption properties and biocompatibility study of a poly-cationic peptide functionalized graphene–silver nanocomposite

Safe-by-design synthesis of a poly-cationic functionalized graphene–silver nanocomposite as a novel eco-benign antibacterial, biofilm inhibiting and disrupting agent.

Fabrication of Nontoxic Reduced Graphene Oxide Protein Nanoframework as Sustained Antimicrobial Coating for Biomedical Application

Bacterial colonization on medical devices is a major concern in the healthcare industry. In the present study, we report synthesis of environmental sustainable reduced graphene oxide (rGO) on the large scale through biosynthetic route and its potential application for antibacterial coating on medical devices. HRTEM image depicts formation of graphene nanosheet, while DLS and ζ potential studies reveal that in aqueous medium the average hydrodynamic size and surface charge of rGO are 4410 ± 116 nm and -25.2 ± 3.2 mV, respectively. The Raman, FTIR, and XPS data suggest in situ conjugation of protein with rGO. The as-synthesized rGO protein nanoframework exhibits dose-dependent antibacterial activity and potential of killing of 94% of Escherichia coli when treated with 80 μg/mL of rGO for 4 h. The hemolytic and cytotoxicity studies demonstrate that rGO protein nanoframework is highly biocompatible at the same concentration showing significant antimicrobial properties. The rGO coated on the glass surface obtained through covalent bonding exhibits potent antibacterial activity. Antibacterial mechanism further demonstrates that rGO-protein nanoframework in dispersed state (rGO solution) exerts bactericidal effect through physical disruption accompanied by ROS-mediated biochemical responses. The rGO subsequently entering into the cytoplasm through the damaged membrane causes metabolic imbalance in the cells. In sharp contrast, physical damage of the cell membrane is the dominant antibacterial mechanism of rGO in the immobilized state (rGO coated glass). The obtained results help indepth understanding of the antibacterial mechanism of the biosynthesized rGO and a novel way to develop nontoxic antibacterial coating on medical devices to prevent bacterial infection.

Potential impacts of silver nanoparticles on bacteria in the aquatic environment

It is inevitable that nano-silver will be released into the environment. Therefore, there is an urgent need to better understand the effects of silver nanoparticles (Ag-NPs) on microbes in natural and engineered environments. The most remarkable gap in our knowledge on this lies on the low Ag-NPs dose side. This review summarized studies on the effects of Ag-NPs on bacteria from simple to complicated aquatic systems. A hormetic model with a narrow stimulatory zone has been proposed based on both experimental phenomenon and the potential mechanisms of the observed effects. Spectrum of the stimulating zone depends on Ag-NP properties, bacterial types and environmental conditions tested. This may become a concern in terms of Ag-NP disposal, and further research is required to build a sophisticated toxicity model for Ag-NPs.

Antibacterial properties and mechanism of graphene oxide-silver nanocomposites as bactericidal agents for water disinfection

Providing clean and affordable drinking water without harmful disinfection byproducts generated by conventional chemical disinfectants gives rise to the need for technological innovation. Nanotechnology has great potential in purifying water and wastewater treatment. A graphene oxide-silver (GO-Ag) nanocomposite with excellent antibacterial activity was prepared and characterized by transmission electron microscope and X-ray photoelectron spectroscopy. The tests were carried out using Escherichia coli and Staphylococcus aureus as model strains of Gram-negative and Gram-positive bacteria, respectively. The effect of bactericide dosage and pH on antibacterial activity of GO-Ag was examined. Morphological observation of bacterial cells by scanning electron microscope showed that GO-Ag was much more destructive to cell membrane of Escherichia coli than that of Staphylococcus aureus. Experiments were carried out using catalase, superoxide dismutase and sodium thioglycollate to investigate the formation of reactive oxygen species and free silver ions in the bactericidal process. The activity of intracellular antioxidant enzymes was measured to investigate the potential role of oxidative stress. According to the consequence, synergetic mechanism including destruction of cell membranes and oxidative stress accounted for the antibacterial activity of GO-Ag nanocomposites. All the results suggested that GO-Ag nanocomposites displayed a good potential for application in water disinfection.

Facile fabrication of rice husk based silicon dioxide nanospheres loaded with silver nanoparticles as a rice antibacterial agent

Bacterial leaf blight of rice caused by Xanthomonas oryzae pv. oryzae (Xoo) is a major disease of rice, leading to reduction in production by 10-50%. In order to control this disease, various chemical bactericides have been used. Wide and prolonged application of chemical bactericides resulted in the resistant strain of Xoo that was isolated from rice. To address this problem, we were searching for an environmentally friendly alternative to the commonly used chemical bactericides. In this work, we demonstrate that silicon dioxide nanospheres loaded with silver nanoparticles (SiO2-Ag) can be prepared by using rice husk as base material precursor. The results of the antibacterial tests showed that SiO2-Ag composites displayed antibacterial activity against Xoo. At cellular level, the cell wall/membrane was damaged and intercellular contents were leaked out by slow-releasing of silver ions from SiO2-Ag composites. At molecular level, this composite induced reactive oxygen species production and inhibited DNA replication. Based on the results above, we proposed the potential antibacterial mechanism of SiO2-Ag composites. Moreover, the cytotoxicity assay indicated that the composites showed mild toxicity with rice cells. Thus, this work provided a new strategy to develop biocide derived from residual biomass.

Antibacterial Effects of Biosynthesized Silver Nanoparticles on Surface Ultrastructure and Nanomechanical Properties of Gram-Negative Bacteria viz. Escherichia coli and Pseudomonas aeruginosa

Understanding the interactions of silver nanoparticles (AgNPs) with the cell surface is crucial for the evaluation of bactericidal activity and for advanced biomedical and environmental applications. Biosynthesis of AgNPs was carried out through in situ reduction of silver nitrate (AgNO3) by cell free protein of Rhizopus oryzae and the synthesized AgNPs was characterized by UV-vis spectroscopy, high resolution transmission electron microscopy (HRTEM), dynamic light scattering (DLS), ζ-potential analysis, and FTIR spectroscopy. The HRTEM measurement confirmed the formation of 7.1 ± 1.2 nm AgNPs, whereas DLS study demonstrated average hydrodynamic size of AgNPs as 9.1 ± 1.6 nm. The antibacterial activity of the biosynthesized AgNPs (ζ = -17.1 ± 1.2 mV) was evaluated against Gram-negative bacteria such as Escherichia coli and Pseudomonas aeruginosa. The results showed that AgNPs exhibited concentration dependent antibacterial activity and 100% killing of E. coli and P. aeruginosa achieved when the cells were treated with 4.5 and 2.7 μg/mL AgNPs, respectively for 4 h. Furthermore, the intracellular reactive oxygen species (ROS) production suppressed the antioxidant defense and exerted mechanical damage to the membrane. AgNPs also induced surface charge neutralization and altered of the cell membrane permeability causing nonviability of the cells. Atomic force microscopy (AFM) studies depicted alteration of ultrastructural and nanomechanical properties of the cell surface following interaction with AgNPs, whereas FTIR spectroscopic analysis demonstrated that cell membrane of the treated cells underwent an order-to-disorder transition during the killing process and chemical composition of the cell membrane including fatty acids, proteins, and carbohydrates was decomposed following interaction with AgNPs.

Disinfection of water by pulsed power technique: a mechanistic perspective

A detailed sub-cellular level bacterial disinfection mechanism and perturbation of bacterial surface potential due to ROS/RNS in pulsed plasma treatment.

Yeast-derived biosynthesis of silver/silver chloride nanoparticles and their antiproliferative activity against bacteria

Here, we provided the first evidence of Ag/AgCl-nanoparticles production in yeast strains fromin vitrocultures.

Morphology-dependent antimicrobial activity of Cu/CuxO nanoparticles

Cu/CuxO nanoparticles (NPs) with different morphologies have been synthesized with glucose as a reducing agent. The X-ray diffraction and Scanning electron microscopy imaging show that the Cu/CuxO NPs have fine crystalline peaks with homogeneous polyhedral, flower-like, and thumbtack-like morphologies. Their antimicrobial activities were evaluated on inactivation of Escherichia coli using a fluorescence-based live/dead staining method. Dissolution of copper ions from these NPs was determined. Results demonstrated a significant growth inhibition for these NPs with different morphologies, and the flower-like Cu/CuxO NPs were the most effective form, where more copper ions were dissolved into the culture media. Surface free energy calculations based on first-principle density functional theory show that different crystal facets of the copper NPs have diverse surface energy, indicating the highest reactivity of the flower-like NPs, which is consistent with the results from the dissolution study and antimicrobial activity test. Together, these results suggest that the difference between the surface free energy may be a cause for their morphology-dependent antimicrobial activity.