Foliar uptake and translocation of formaldehyde with Bracket plants (Chlorophytum comosum)

A review of phyto- and microbial-remediation of indoor volatile organic compounds

Volatile organic compounds (VOCs) are crucial air pollutants in indoor environments, emitted from building materials, furniture, consumer products, cleaning products, smoking, fuel combustion, cooking, and other sources. VOCs are also emitted from human beings via breath and whole-body skin. Some VOCs cause dermal/ocular irritation as well as gastrointestinal, neurological, cardiovascular, and/or carcinogenic damage to human health. Because people spend most of their time indoors, active control of indoor VOCs has garnered attention. Phytoremediation and microbial remediation, based on plant and microorganism activities, are deemed sustainable, cost-effective, and public-friendly technologies for mitigating indoor VOCs. This study presents the major sources of VOCs in indoor environments and their compositions. Various herbaceous and woody plants used to mitigate indoor VOCs are summarized and their VOCs removal performance is compared. Moreover, this paper reviews the current state of active phytoremediation and microbial remediation for the control of indoor VOCs, and discusses future directions.

2-Heptanol inhibits Botrytis cinerea by accelerating amino acid metabolism and retarding membrane transport

During the postharvest storage of tomatoes, they are susceptible to infection by Botrytis cinerea, leading to significant economic losses. This study evaluated the antifungal potential of 2-heptanol (2-HE), a volatile biogenic compound, against B. cinerea and explored the underlying antifungal mechanism. The results indicated that 2-HE effectively suppressed the growth of B. cinerea mycelia both in vivo and in vitro and stimulated the activities of antioxidative enzymes, including superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) in tomatoes. Furthermore, 2-HE reduced spore viability, compromised membrane integrity, and resulted in increased levels of extracellular nucleic acids, protein content, and membrane lipid peroxidation. Transcriptomic analysis revealed that 2-HE disrupted the membrane transport system and enhanced amino acid metabolism, which led to intracellular nutrient depletion and subsequent B. cinerea cell death. Additionally, the 2-HE treatment did not negatively impact the appearance or quality of the tomatoes. In conclusion, the findings of this study offer insights into the use of 2-HE as a biocontrol agent in food and agricultural applications.

Phytoremediation of formaldehyde by three selected non-native indoor plant species

Formaldehyde is an organic volatile compound and a commonly used chemical in various construction materials thus causing dwellers to be exposed to it inside a building. Its remediation from indoor air has been carried out through various techniques where potted plants and living walls are at the front foot. It is necessary to study plants under various conditions for their efficiency. We selected three plant species Epipremnum aureum, Chlorophytum comosum, and Spathiphyllum wallisii non-native of Bahrain. These plants were tested under normal conditions in a sealed fumigation box where formaldehyde concentration was kept ∼3 ppm, CO2 ∼ 450 ppm, light intensity 1000 Lx (equal to 13.5 µmol.m-2.s-1), irrigated with tap water. Analysis of Variance (ANOVA) statistical method was performed to test the significant differences of purification efficiencies of the tested indoor plants against HCHO. In addition, the statistical method was used to test the significant difference, if any, of the plants to CO2 emission because of absorbing HCHO. The physical health of plants and their short-term remediation ability reveals that all plants exhibited up to 70% remediation potential and tolerance to remediate the target chemical. It is evident that the impact of local environmental factors on the plants is negligible.

Obtainment and Inoculation of Acinetobacter pittii Strain JJ-2, and Combined Action with Plants for Formaldehyde and CO2 Removal: A Research Study

A formaldehyde-degrading bacterium JJ-2 was isolated from the rhizosphere of Chlorophytum and identified as Acinetobacter pittii by colony morphology and 16S rDNA sequence analysis. Further studies showed that under optimal conditions, JJ-2 could maintain activity for six cycles at an initial formaldehyde concentration of 450 mg L-1. At the same time, the complete degradation time was shortened from 12 to 6 h. When the JJ-2 strain was inoculated into sterile soil, the surface spray method had the best effect, and the removal efficiency of 5 ppm formaldehyde increased by 22.63%. In an actual potted plants system colonized with strain JJ-2, the first and second fumigations (without re-inoculation) increased removal by 1.36 times and 0.92 times during the day and 1.27 times and 2.07 times at night. In addition, in the second fumigation, the plant-bacteria combined system was 693.63 ppm and the plant system was 715.34 ppm, effectively reducing the CO2 concentration. This study provides an economical, ecological, and efficient approach to improve the combined system of plants and bacteria to remove gaseous formaldehyde from indoor air, with a positive impact on carbon neutrality.

Simultaneous influence of light and CO2 on phytoremediation performance and physiological response of plants to formaldehyde

Phytoremediation technology is an effective method to remove formaldehyde indoors, but the purification capacity and physiological response of plants to formaldehyde under the simultaneous influence of light and CO₂ have not been examined in previous studies. In this study, formaldehyde fumigation experiments were conducted on the C₃ plants Epipremnum aureum A. and Chlorophytum comosum L., and the crassulacean acid metabolism (CAM) plant Dieffenbachia maculate A. The phytoremediation performance and physiological response of plants were studied. The initial concentration of formaldehyde was established at 11.950 ± 1.442 [Formula: see text]; the light intensities were 448 ± 7 [Formula: see text], 1628 ± 22 [Formula: see text], and 3259 ± 22 [Formula: see text], respectively; and the concentrations of CO₂ were 455 ± 29 [Formula: see text], 978 ± 50 [Formula: see text], 2020 ± 66 [Formula: see text], and 3006 ± 95 [Formula: see text], respectively. The results indicated that the highest purification rates of formaldehyde by E. aureum, D. maculata, and C. comosum were 55.8%, 43.7%, and 53.2%, respectively. The light intensity had a positive effect on the formaldehyde purification rates of all three plants and positively stimulated peroxidase (POD) activity, while the CO₂ concentration had no significant impact on the formaldehyde purification capacity and plants' physiological characteristics. Exposure to formaldehyde inhibited formaldehyde dehydrogenase (FADH) activity and positively stimulated catalase (CAT) activity. The superoxide dismutase (SOD) activity positively correlated with the formaldehyde purification capacity of plants.

Pot study using Chlorophytum comosum plants to biomonitor PAH levels in domestic kitchens

In indoor environments, cooking is a major contributor to indoor air pollution releasing potentially harmful toxic compounds such as polycyclic aromatic hydrocarbons. In our study, Chlorophytum comosum 'Variegata' plants were applied to monitor PAH emission rates and patterns in previously selected rural Hungarian kitchens. Concentration and profile of accumulated PAHs could be well explained by cooking methods and materials used in each kitchen. Accumulation of 6-ring PAHs was characteristic in the only kitchen which frequently used deep frying. It also should be emphasized that applicability of C. comosum as indoor biomonitor was assessed. The plant has proven a good monitor organism as it accumulated both LMW and HMW PAHs.

Transport and removal mechanism of benzene by Tradescantia zebrina Bosse and Epipremnum aureum (Linden ex André) G.S. Bunting in air-plant-solution system

Phytoremediation is considered an effective method for indoor air pollution control. The removal rate and mechanism of benzene in air by two plants, Tradescantia zebrina Bosse and Epipremnum aureum (Linden ex André) G. S. Bunting, were investigated through fumigation experiments under the condition of plant hydroponics culturing. Results showed that the plant removal rates increased with increase in benzene concentration in air. When the benzene concentration in air was set at 432.25-1314.75 mg·m^-3, the removal rates of T. zebrina and E. aureum ranged from 23.05 ± 3.07 to 57.42 ± 8.28 mg·kg^-1·h^-1 FW and from 18.82 ± 3.73 to 101.58 ± 21.20 mg·kg^-1·h^-1 FW, respectively. The removal capacity was positively related to the transpiration rate of plants, indicating that gas exchange rate could be a key factor for the evaluation of removal capacity. There existed fast reversible transport of benzene on air-shoot interface and root-solution interface. After shoot exposure to benzene for 1 h, downward transport was the dominant mechanism in the removal of benzene in air by T. zebrina, while in vivo fixation was the dominant mechanism at exposure time of 3 and 8 h. Within 1-8 h of shoot exposure time, in vivo fixation capacity was always the key factor affecting the removal rate of benzene in the air by E. aureum. Contribution ratio of in vivo fixation in the total benzene removal rate increased from 6.29 to 92.29% for T. zebrina and from 73.22 to 98.42% for E. aureum in the experimental conditions. Reactive oxygen species (ROS) burst induced by benzene exposure was responsible for the contribution ratio change of different mechanisms in the total removal rate, which also was verified by the change of activities of antioxidant enzymes (CAT, POD, and SOD). Transpiration rate and antioxidant enzyme activity could be considered parameters to evaluate the plant removal ability to benzene and to screen plants for establishment of plant-microbe combination technology.

Phytoremediation for the indoor environment: a state-of-the-art review

Poor indoor air quality has become of particular concern within the built environment due to the time people spend indoors, and the associated health burden. Volatile organic compounds (VOCs) off-gassing from synthetic materials, nitrogen dioxide and harmful outdoor VOCs such benzene, toluene, ethyl-benzene and xylene penetrate into the indoor environment through ventilation and are the main contributors to poor indoor air quality with health effects. A considerable body of literature over the last four decades has demonstrate the removal of gaseous contaminants through phytoremediation, a technology that relies on plant material and technologies to remediate contaminated air streams. In this review we present a state-of-the-art on indoor phytoremediation over the last decade. Here we present a review of 38 research articles on both active and passive phytoremediation, and describe the specific chemical removal efficiency of different systems. The literature clearly indicates the efficacy of these systems for the removal of gaseous contaminants in the indoor environment, however it is evident that the application of phytoremediation technologies for research purposes in-situ is currently significantly under studied. In addition, it is common for research studies to assess the removal of single chemical species under controlled conditions, with little relevancy to real-world settings easily concluded. The authors therefore recommend that future phytoremediation research be conducted both in-situ and on chemical sources of a mixed nature, such as those experienced in the urban environment like petroleum vapour, vehicle emissions, and mixed synthetic furnishings off-gassing. The assessment of these systems both in static chambers for their theoretical performance, and in-situ for these mixed chemical sources is essential for the progression of this research field and the widespread adoption of this technology.

Novel insights into indoor air purification capability of microalgae: characterization using multiple air quality parameters and comparison with common methods

Indoor air purification received more attention recently. In this study, the effects of six common indoor ornamental plants (Epripremnum aureum, Chlorphytum comosum, Aloe vera, Sedum sediforme, Cereus cv. Fairy Castle, and Sedum adolphii) and three kinds of microalgae (Chlorella sp. HQ, Scenedesmus sp. LX1, and C. vulgaris) on the removal of four types of air pollutants (particulate matters less than 2.5 (PM_2.5) and 10 μm (PM₁₀) in size, formaldehyde (HCHO) and total volatile organic compounds (VOC_S)) in test chamber compared with common physical purification methods (high efficiency particulate air filter and nano activated carbon absorption) were investigated. Their effects on oxygen, carbon dioxide, and relative humidity were also evaluated. The results showed that microalgae, especially C. vulgaris, was more suitable for removing PM_2.5 and PM₁₀, and the removal rates were 55.42 ± 25.77% and 45.76 ± 5.32%, respectively. The removal rates of HCHO and VOCs by all three kings of microalgae could reach 100%. Part of ornamental plants took a longer time to achieve 100% removal of HCHO and VOCs. Physical methods were weaker than ornamental plants and microalgae in terms of increased relative humidity and O₂ content. In general, microalgae, especially C. vulgaris could purify indoor air pollutants more efficiently. The above studies provided data and theoretical support for the purification of indoor air pollutants by microalgae.

Assessment of health risks associated with pesticide and heavy metal contents in Fritillaria thunbergii Miq. (Zhe Beimu)

Fritillaria thunbergii Miq. (Zhe Beimu, F. thunbergii) is widely cultivated in China's Zhejiang province, and pesticides and heavy metals are two major factors affecting its quality and safety. A total of 106 F. thunbergii samples from six main production areas were analyzed for 76 pesticides and four heavy metal content (As, Cd, Hg, and Pb). The pesticide detection rate of the samples was 66.98%; overall, the pesticide residues were very low, and residue levels ranged from 0.010 to 0.231 mg kg^-1. The detection rates of As, Cd, Hg, and Pb were 95.3%, 100%, 76.4%, and 100%, respectively. A risk assessment of human exposure to pesticides and heavy metals via intake of F. thunbergii was performed, and the results revealed that the pesticide residues and heavy metal content detected in F. thunbergii does not pose a potential risk to human health, either in the long or short term. The exposure assessment showed that the levels of pesticides and heavy metals in F. thunbergii were safe for human consumption. These results provide useful information on F. thunbergii consumption.

The dual detection of formaldehydes and sulfenic acids with a reactivity fluorescent probe in cells and in plants

In order to reveal the inter-relationship between protein sulfenic acid (RSOH) and formaldehyde (FA) in different physiological processes, development of tools that are capable of respective and continuous detection for both species is highly valuable. Herein, we reported an "off-on" sensor NA-SF for dual detection of RSOH and FA in cells and plant tissues. Importantly, the highly desirable attribute of the probe NA-SF combined with TCEP, makes it possible to monitor endogenous both RSOH and FA in living cells and plants tissues. NA-SF has been applied successfully in detecting RSOH and FA at physiological concentrations in HeLa, HepG2, A549 cells. Furthermore, the application of NA-SF in evaluating the RSOH and FA level in Arabidopsis thaliana roots of different growth stages are performed. The results show that the level of RSOH and FA in Arabidopsis thaliana roots correlates well with their growth stages, which suggests that both RSOH and FA might play important roles in promoting plant growth and roots elongation. And it also implied a potential application for the biological and pathological research of RSOH and FA, especially in plant physiology. Therefore, we expect NA-SF could provide a convenient and robust tool for better understanding the physiological and pathological roles of RSOH and FA.

New Insight into Short Time Exogenous Formaldehyde Application Mediated Changes in Chlorophytum comosum L. (Spider Plant) Cellular Metabolism

Chlorophytum comosum L. plants are known to effectively absorb air pollutants, including formaldehyde (HCHO). Since the metabolic and defense responses of C. comosum to HCHO are poorly understood, in the present study, biochemical changes in C. comosum leaves induced by 48 h exposure to exogenous HCHO, applied as 20 mg m^-3, were analyzed. The observed changes showed that HCHO treatment caused no visible harmful effects on C. comosum leaves and seemed to be effectively metabolized by this plant. HCHO application caused no changes in total chlorophyll (Chl) and Chl a content, increased Chl a/b ratio, and decreased Chl b and carotenoid content. HCHO treatment affected sugar metabolism, towards the utilization of sucrose and synthesis or accumulation of glucose, and decreased activities of aspartate and alanine aminotransferases, suggesting that these enzymes do not play any pivotal role in amino acid transformations during HCHO assimilation. The total phenolic content in leaf tissues did not change in comparison to the untreated plants. The obtained results suggest that HCHO affects nitrogen and carbohydrate metabolism, effectively influencing photosynthesis, shortly after plant exposure to this volatile compound. It may be suggested that the observed changes are related to early HCHO stress symptoms or an early step of the adaptation of cells to HCHO treatment. The presented results confirm for the first time the direct influence of short time HCHO exposure on the studied parameters in the C. comosum plant leaf tissues.

Targeted and non-targeted analysis for the investigation of pesticides influence on wheat cultivated under field conditions

A comprehensive approach was applied to evaluate the effects of pesticides on the metabolism of wheat (Triticum aestivum L). The application of commercially available pesticide formulations under field cultivation conditions provided a source of metabolic data unlimited by model conditions, representing a novel approach to study the effects of pesticides on edible plants. Gas and liquid chromatography coupled to tandem mass spectrometry were employed for targeted and non-targeted analysis of wheat roots and shoots sampled six times during the six-week experiment. The applied pesticides: prothioconazole, tebuconazole, fluoxastrobin, diflufenican, florasulam, and penoxulam were found at concentrations ranging 0.0070-25.20 mg/kg and 0.0020-2.2 mg/kg in the wheat roots and shoots, respectively. The following pesticide metabolites were identified in shoots: prothioconazole-desthio (prothioconazole metabolite), 5-(4-chlorophenyl)-2,2-dimethyl-3-(1,2,4-triazol-1-ylmethyl)pentane-1,3-diol (tebuconazole metabolite), and N-(5,8-dimethoxy[1,2,4]triazolo[1,5-c]pyrimidin-2-yl)-2,4-dihydroxy-6-(trifluoromethyl)benzene sulphonamide (penoxulam metabolite). The metabolic fingerprints and profiles changed during the experiment, reflecting the cumulative response of wheat to both its growth environment and pesticides, as well as their metabolites. Approximately 15 days after the herbicide treatment no further changes in the plant metabolic profiles were observed, despite the presence of pesticide and their metabolites in both roots and shoots. This is the first study to combine the determination of pesticides and their metabolites plant tissues with the evaluation of plant metabolic responses under field conditions. This exhaustive approach contributes to broadening the knowledge of pesticide effects on edible plants, relevant to food safety.

The mechanism of enhanced lignin regulating foliar Cd absorption and yield in rice (Oryza sativa L.)

The impact of atmospheric deposition of cadmium (Cd) in cereal crops has become a global concern. Enhanced lignin content was expected to benefit the plant performance against Cd exposure. To date, however, the underlying mechanisms of lignin regulating foliar Cd absorption in rice (Oryza sativa L.) and its effect on grain yield remains unclear. In present study, the effect and mechanism of rice in response to leaf Cd exposure were investigated using 113Cd stable isotope and a lignin-increased rice mutant. The highest Cd uptake efficiency and uptake amount was observed in wild type (WT) plant grown in the maturity period, which were 3-fold higher than in mutant plant. Compared to WT, the mutant exhibited 14.75% and 25.43% higher contents in G- and S-unit of lignin monomers. Lignin biosynthesis and polymerization related genes (OsPAL/OsCOMT/Os4CL3/OsLAC5/OsLAC15) were significantly up-regulated in mutants. In addition, the enzyme activities involved in the above process were also significantly increased by 1.24-1.49-fold. The increased Cd retention in cell wall and decreased gene expression levels of OsNRAMP5, OsHMA3 and OsIRT1 in mutant indicated that lignin effectively inhibited Cd transportion in plant tissues. Moreover, the antioxidant capacity and photosynthesis efficiency in mutant plant were obviously improved, leading to higher Cd tolerance and increased grain yield. Our results revealed the molecular and physiological mechanisms of enhanced lignin regulating foliar Cd absorption and yield in rice, and provided the valuable rice genotype to ensure food safety.

Effects of airflow rate and plant species on formaldehyde removal by active green walls

Formaldehyde is a hazardous volatile organic compound (VOC) listed as a Group 1 carcinogen by the International Agency for Research on Cancer. The active green wall system is a promising technology that utilizes active airflow passing through plants grown along a vertical alignment to increase their mass exposure to pollutants. However, few studies have investigated the effect of airflow rate on their efficacy for formaldehyde removal, and plant-mediated effects are unknown. This study assessed the formaldehyde removal ability of the active green wall using dynamic experiments. Three levels of airflow rate (30, 50, and 65 m³·h^-1) and inlet formaldehyde concentration (1.0, 2.0, and 3.5 mg·m^-3) were used and three plant species were investigated. The removal of formaldehyde by active green walls was significantly (P < 0.01) affected by the airflow rate, formaldehyde concentration, and plant species. The single pass removal efficiency varying from 38.18 to 94.42% decreased as the airflow rate and formaldehyde concentration increased. The elimination capacity varied from 189 to 1154 mg·m^-2·h^-1 and increased with the inlet formaldehyde loading rate. Significant differences in formaldehyde removal effectiveness among the plant species were observed with Chlorophytum comosum performing the best, followed by Schefflera octophylla, with Chamaedorea elegans being the worst.

A review of plants formaldehyde metabolism: Implications for hazardous emissions and phytoremediation

The wide use of hazardous formaldehyde (CH₂O) in disinfections, adhesives and wood-based furniture leads to undesirable emissions to indoor environments. This is highly problematic as formaldehyde is a highly hazardous and toxic compound present in both liquid and gaseous form. The majority of gaseous and atmospheric formaldehyde derive from microbial and plant decomposition. However, plants also reversibly absorb formaldehyde released from for example indoor structural materials in such as furniture, thus offering beneficial phytoremediation properties. Here we provide the first comprehensive review of plant formaldehyde metabolism, physiology and remediation focusing on release and absorption including species-specific differences for maintaining indoor environmental air quality standards. Phytoremediation depends on rhizosphere, temperature, humidity and season and future indoor formaldehyde remediation therefore need to take these biological factors into account including the balance between emission and phytoremediation. This would pave the road for remediation of formaldehyde air pollution and improve planetary health through several of the UN Sustainable Development Goals.

Phytoremediation of indoor formaldehyde by plants and plant material

Formaldehyde evolves from various household items and is of environmental and public health concern. Removal of this contaminant from the indoor air is of utmost importance and currently, various practices are in the field. Among these practices, indoor plants are of particular importance because they help in controlling indoor temperature, moisture, and oxygen concentration. Plants and plant materials studied for the purpose have been reviewed hereunder. The main topics of the review are, mechanism of phytoremediation, plants and their benefits, plant material in formaldehyde remediation, and airtight environmental and health issues. Future research in the field is also highlighted which will help new researches to plan for the remediation of formaldehyde in indoor air. The remediation capacity of several plants has been tabulated and compared, which gives easy access to assess various plants for remediation of the target pollutant. Challenges and issues in the phytoremediation of formaldehyde are also discussed.Novelty statement: Phytoremediation is a well-known technique to mitigate various organic and inorganic pollutants. The technique has been used by various researchers for maintaining indoor air quality but its efficiency under real-world conditions and human activities is still a question and is vastly affected relative to laboratory conditions. Several modifications in the field are in progress, here in this review article we have summarized and highlighted new directions in the field which could be a better solution to the problem in the future.

Foliar dust as a reliable environmental monitor of heavy metal pollution in comparison to plant leaves and soil in urban areas

Pollution of atmospheric particulate matter carrying heavy metals has posed a great threat to various ecosystem compartments. Here, a total of 540 samples from four ecosystem compartments (plant leaves, foliar dust, surface soil, and subsoil) were collected in urban soil-plant systems to characterize the heavy metal concentration and composition of foliar dust, to verify the suitability of foliar dust as an environmental monitor, and to explore the importance of foliar dust in shaping the heavy metal composition in plant leaves. We found that the concentrations of all detected elements (lead, zinc, copper, chromium, nickel, and manganese) in foliar dust were the highest among the four ecosystem compartments. The mass of element per unit leaf area, considering both the dust retention amount and the heavy metal concentration of foliar dust, had significant positive correlations with the degree of heavy metal pollution in soil. Foliar dust could reflect ambient elemental composition most reliably among the four ecosystem compartments. The above findings show that foliar dust is more suitable for environmental monitoring than soil and plant materials in urban areas. In addition, the elemental composition of plant leaves differed significantly with different soil-plant systems although species identity dominated the leaf elemental composition. The variation partitioning model and the partial correlation analysis confirm that foliar dust plays a more important role in shaping the elemental composition of plant leaves than soil. This study provides a new way for environmental pollution monitoring and contributes to a comprehensive understanding of atmospheric particulate matter.

Uptake kinetics and accumulation of pesticides in wheat (Triticum aestivum L.): Impact of chemical and plant properties

Plant uptake is an important process in determining the transfer of pesticides through a food chain. Understanding how crops take up and translocate pesticides is critical in developing powerful models to predict pesticide accumulation in agricultural produce and potential human exposure. Herein, wheat was selected as a model plant species to investigate the uptake and distribution of eleven widely used pesticides in a hydroponic system as a function of time for 144 h. The time-dependent uptake kinetics of these pesticides were fitted with a first-order 1-compartment kinetic model. During 144 h, flusilazole and difenoconazole, with relative high log K_ow (3.87 and 4.36, respectively), displayed higher root uptake rate constants (k). To clarify the role of root lipid content (f_lip) in plant accumulation of pesticides, we conducted a lipid normalization meta-analysis using data from this and previous studies, and found that the f_lip value was an important factor in predicting the root concentration factor (RCF) of pesticides. An improved correlation was observed between log RCF and log f_lipK_ow (R² = 0.748, N = 26, P < 0.001), compared with the correlation between log RCF and log K_ow (R² = 0.686, N = 26, P < 0.001). Furthermore, the hydrophilic pesticides (e.g. log K_ow < 2) were found to reach partition equilibrium faster than lipophilic pesticides (e.g. log K_ow > 3) during the uptake process. The quasi-equilibrium factor (α_pt) was inversely related to log K_ow (R² = 0.773, N = 11, P < 0.001) suggesting a hydrophobicity-regulated uptake equilibrium. Findings from this study could facilitate crop-uptake model optimization.

Current State of Indoor Air Phytoremediation Using Potted Plants and Green Walls

Urban civilization has a high impact on the environment and human health. The pollution level of indoor air can be 2–5 times higher than the outdoor air pollution, and sometimes it reaches up to 100 times or more in natural/mechanical ventilated buildings. Even though people spend about 90% of their time indoors, the importance of indoor air quality is less noticed. Indoor air pollution can be treated with techniques such as chemical purification, ventilation, isolation, and removing pollutions by plants (phytoremediation). Among these techniques, phytoremediation is not given proper attention and, therefore, is the focus of our review paper. Phytoremediation is an affordable and more environmentally friendly means to purify polluted indoor air. Furthermore, studies show that indoor plants can be used to regulate building temperature, decrease noise levels, and alleviate social stress. Sources of indoor air pollutants and their impact on human health are briefly discussed in this paper. The available literature on phytoremediation, including experimental works for removing volatile organic compound (VOC) and particulate matter from the indoor air and associated challenges and opportunities, are reviewed. Phytoremediation of indoor air depends on the physical properties of plants such as interfacial areas, the moisture content, and the type (hydrophobicity) as well as pollutant characteristics such as the size of particulate matter (PM). A comprehensive summary of plant species that can remove pollutants such as VOCs and PM is provided. Sources of indoor air pollutants, as well as their impact on human health, are described. Phytoremediation and its mechanism of cleaning indoor air are discussed. The potential role of green walls and potted-plants for improving indoor air quality is examined. A list of plant species suitable for indoor air phytoremediation is proposed. This review will help in making informed decisions about integrating plants into the interior building design.

Contribution of PM2.5-Pb in atmospheric fallout to Pb accumulation in Chinese cabbage leaves via stomata

Foliar uptake of Pb is especially important when Chinese cabbage (Brassica rapa spp. pekinensis), having a large leaf surface area, is cultivated in North China during seasons with heavy haze. However, the mechanisms of foliar Pb uptake via stomata by Chinese cabbage exposed to atmospheric fallout are unclear. A field experiment was conducted to explore the impacts of Pb in particulate matter with sizes ≤ 2.5 µm (PM_2.5-Pb) from atmospheric fallout to Pb accumulation in cabbage leaves through stomata. Cabbage varieties with low-Pb-accumulation (LPA) and high-Pb-accumulation (HPA) were examined using inductively coupled plasma-mass spectrometry and scanning electron microscopy/energy-dispersive X-ray analysis. The ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁷Pb ratios of PM_2.5, plants, and soil demonstrated that the major source of Pb in cabbage leaves was PM_2.5. The average width and length of the stomatal apertures were 7.14 and 15.61 µm for LPA cabbage and 8.10 and 16.64 µm for HPA cabbage, which are large enough for PM_2.5-Pb to enter the leaves. The HPA cabbage had significantly higher stomatal width-to-length ratios than the LPA cabbage, indicating that the former trapped much more PM_2.5-Pb and accumulated more Pb. These results clarify the contributions of the stomatal characteristics to PM_2.5-Pb accumulation in the edible parts of Chinese cabbage.

Root-mediated bacterial accessibility and cometabolism of pyrene in soil

Partial transformation of pollutants and mobilization of the produced metabolites may contribute significantly to the risks resulting from biological treatment of soils polluted by hydrophobic chemicals such as polycyclic aromatic hydrocarbons (PAHs). Pyrene, a four-ringed PAH, was selected here as a model pollutant to study the effects of sunflower plants on the bacterial accessibility and cometabolism of this pollutant when located at a spatially distant source within soil. We compared the transformation of passively dosed ¹⁴C-labeled pyrene in soil slurries and planted pots that were inoculated with the bacterium Pseudomonas putida G7. This bacterium combines flagellar cell motility with the ability to cometabolically transform pyrene. Cometabolism of this PAH occurred immediately in the inoculated and shaken soil slurries, where the bacteria had full access to the passive dosing devices (silicone O-rings). Root exudates did not enhance the survival of P. putida G7 cells in soil slurries, but doubled their transport in column tests. In greenhouse-incubated soil pots with the same pyrene sources instead located centimeters from the soil surface, the inoculated bacteria transformed ¹⁴C-labeled pyrene only when the pots were planted with sunflowers. Bacterial inoculation caused mobilization of ¹⁴C-labeled pyrene metabolites into the leachates of the planted pots at concentrations of approximately 1 mg L^-1, ten times greater than the water solubility of the parent compound. This mobilization resulted in a doubled specific root uptake rate of ¹⁴C-labeled pyrene equivalents and a significantly decreased root-to-fruit transfer rate. Our results show that the plants facilitated bacterial access to the distant pollutant source, possibly by increasing bacterial dispersal in the soil; this increased bacterial access was associated with cometabolism, which contributed to the risks of biodegradation.

A rapid method to assess the formaldehyde dehydrogenase activity in plants for the remediation of formaldehyde

The formaldehyde dehydrogenase (FADH) activity in plants is essential to the removal of airborne formaldehyde (FA) by plants. A rapid and efficient method was established to assess the FADH activity in plants by analyzing the efficiencies of the extracts of fresh and enzyme-inactivated leaves to degrade FA, with the enzyme-inactivated leaves prepared by freezing with liquid nitrogen. The efficiencies of airborne FA dissipated by different plants were evaluated through the FA fumigation experiments using four selected plants, with the results analyzed against the calculated leaf FADH activities. Fresh and enzyme-inactivated leaf extracts degraded FA to different extents. The degradative efficiencies of leaf extracts were positively related to the initial FA test levels at 6-18 mg l^-1. The relative plant-leaf FADH activities formed the order of Chenopodium album L. > Atenia cordifolia > Plantain > Aloe, which was in line with the observed FA dissipating efficiencies of the plants exposed to 0.72 mg m^-3 airborne FA for 24 h. Other dominant degrading mechanisms in plant leaves resulted in higher dissipating efficiencies of Plantain over that of Atenia cordifolia when exposed to 1.56 mg m^-3 FA for 24 h. The established method could be applied to estimate the FADH activity in plants for assessment of the plant remediation efficiency of FA in air at lower concentrations.

Compound-Specific Isotope Analysis and Enantiomer Fractionation to Characterize the Transformation of Hexachlorocyclohexane Isomers in a Soil-Wheat Pot System

The uptake by plants from soil is one of the first steps for hexachlorocyclohexane (HCH) isomers to enter the food web. However, the HCH transformation associated with the uptake process is still not well understood. Therefore, a soil-wheat pot experiment was conducted to characterize the HCH transformation during wheat growth using compound-specific isotope analysis (CSIA) and enantiomer fractionation. The results showed that the δ¹³C and δ³⁷Cl values of β-HCH remained stable in soil and wheat, revealing no transformation. In contrast, an increase of δ¹³C and δ³⁷Cl values of α-HCH indicated its transformation in soil and wheat. A shift of the enantiomer fraction (EF) (-) from 0.50 to 0.35 in soil at the jointing stage and 0.35 to 0.57 at the harvest stage suggested that the preferential transformation of enantiomers varied at different growth stages. Based on the dual element isotope analysis, the transformation mechanism in the soil-wheat system was different from that in wheat in hydroponic systems. The high abundance of HCH degraders, Sphingomonas sp. and Novosphingobium sp., was detected in the α-HCH-treated rhizosphere soil, supporting the potential for biotransformation. The application of CSIA and EF allows characterizing the transformation of organic pollutants such as HCHs in the complex soil-plant systems.

Indoor formaldehyde removal by three species of Chlorphytum Comosum under the long-term dynamic fumigation system

Gaseous formaldehyde removal efficiency and physiological characteristics of leaves were investigated through a dynamic fumigation system. Three different species of potted Chlorophytum Comosum, (Green Chlorophytum Comosum for its green leaves), CC (Combined the leaves of Chlorophytum Comosum with leaves half green and half white) and PC (Purple Chlorophytum Comosum for its purple leaves), were exposed to formaldehyde for 7 days. The results showed formaldehyde removal efficiencies in the daytime were 71.07% ± 0.23, 84.66% ± 0.19, and 46.73% ± 0.15 at 1 ppm for GC, CC, and GC plants, respectively, and were 36.21% ± 0.24, 62.15% ± 0.19, and 34.97% ± 0.11 at night. This might be due to higher plant physiological activities (e.g., photosynthesis, respiration, and transpiration) during the daytime than at night. Ten physiological indicators of leaves were chosen to evaluate the 7-day fumigation process, which were chlorophyll, free protein, relative conductivity, malondialdehyde (MDA), hydrogen peroxide (H₂O₂), hydroxyl radical, superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and total antioxidant capacity (T-AOC). Eight of these indicators increased, while chlorophyll decreased by 22.16%, 6.95%, and 25.32%, and CAT decreased by 18.9%, 17.8%, and 25.30% for GC, CC, and PC respectively. Among all the increasing physiological indicators, relative conductivity and MDA showed the greatest increase by 279.32% and 155.56% for PC. A 15-day recovery study was also conducted using MDA and T-AOC as indicators. The results showed that all the tested plants could be tolerant up to the 8 ppm of formaldehyde concentration for 7 days under dynamic fumigation and needed 10-15 days for self-recovery.

Efficiency and mechanism of formaldehyde removal from air by two wild plants; Plantago asiatica L. and Taraxacum mongolicum Hand.-Mazz

Indoor potted plants played an important role in the removal of air-borne VOCs. According to the difference between plant fresh extracts and boiled extracts on breakdown ability to the added formaldehyde, a simple quantitative evaluation method was used to identify the mechanisms of formaldehyde removal from the air by wild Taraxacum mongolicum Hand.-Mazz. and Plantago asiatica L.. After shoots exposure to formaldehyde (1.28 mg/m³ in the air) for 24 h, the formaldehyde removal rates of P. asiatica and T. mongolicum were 73.18 and 121.20 mg/h/kg FW (fresh weight), respectively. Formaldehyde can be transported from the air to the rhizosphere solution by plants, and the maximum rates of transmission by T. mongolicum and P. asiatica were 23.73 and 83.08 mg/h/kg FW, respectively. Although plant metabolism was responsible for formaldehyde loss in the air-plant-solution system, and the metabolic activity depended on the enzymatic and redox reactions in the plants, P. asiatica and T. mongolicum are still good candidate species for developing phyto-microbial technologies. The redox reaction was the main mechanism used by P. asiatica shoots to dissipate formaldehyde, while the enzymatic reaction was the main mechanism used by T. mongolicum. The higher oxidative potential and lower defensive enzyme activity in P. asiatica shoots led to its higher formaldehyde removal rate compared to T. mongolicum. Meanwhile, the stronger redox reaction ability in the T. mongolicum roots was partly responsible for its lower formaldehyde transmission rate. The results show two plants have strong tolerance to formaldehyde in the air and good formaldehyde removal ability.

Immobilization of heavy metals during aquatic and terrestrial litter decomposition in an alpine forest

Plant litter decomposition is an important pathway of heavy metal cycling in forested soil and watershed ecosystems globally, but is so far an overlooked aspects in the existing literature. To investigate the temporal dynamics of heavy metals in decomposing litter, we conducted a two-year field experiment using litterbag method across aquatic and terrestrial ecosystems in an alpine forest on the eastern Tibetan Plateau. Using multigroup comparisons of structural equation modeling with different litter mass-loss intervals, we assessed the direct and indirect effects of several biotic and abiotic factors on the release rates of lead (Pb), cadmium (Cd), and chromium (Cr). Results suggested that both the concentrations and amounts of Pb, Cd, and Cr increased during litter decomposition regardless of ecosystem type and litter species, showing an immobilization pattern. The release rates of Pb, Cd, or Cr shared a common hierarchy of drivers across aquatic and terrestrial ecosystems, with environmental factors and initial litter quality having both direct and indirect effects, and the effects of initial litter quality gained importance in the late decomposition stages. However, litter chemical dynamics and microbial diversity index have significant effects on release rates throughout the decomposition process. Our results are useful for better understanding heavy metal fluxes in aquatic and terrestrial ecosystems, and for predicting anthropogenic heavy metal pollution impacts on ecosystems. In addition, our results indicated that not only spatial but also temporal variability should be taken into consideration when addressing heavy metal dynamics accompanying litter decomposition process.

Formaldehyde removal in the air by six plant systems with or without rhizosphere microorganisms

Uptake and in-plant transport of formaldehyde by six plants with or without soil microorganisms were investigated. The capabilities of fresh and boiled leaf extracts to dissipate added formaldehyde were also measured to evaluate formaldehyde metabolism in plant tissues. Results show that when the initial formaldehyde level in air was 0.56 ± 0.04 mg·m^-3, the removal rate in the plant-only systems varied from 1.91 to 31.8 μg·h^-1·g^-1 FW (fresh weight). The removal rate of plants in the plant-only systems were ordered as Helianthus annuus Linn > Lycopersicon esculentum Miller > Oryza sativa > Sansevieria trifasciata Prain > Bryophyllum pinnatum > Mesembryanthemum cordifolium L. f. Most reduction of formaldehyde in the air was due to degradation by active components in the plant tissues, of which 4-64% of these were through to be enzymatic reactions. In the microbe-plant systems, formaldehyde removal rates increased by 0.24-9.53 fold compared to the plant-only systems, with approximately 19.6-90.5% of the formaldehyde reduction resulting from microbial degradation. Microorganisms added to the rhizosphere solution enhanced phytoremediation by increasing the downward transport of formaldehyde and its release by roots. Results suggest a new means to screen for efficient plant species that can be used for phytoremediation of indoor air.

Roles of reactive oxygen species and antioxidant enzymes on formaldehyde removal from air by plants

The roles of enzymatic reactions and redox reactions caused by reactive oxygen species (ROS) in formaldehyde metabolism in tomatoes and wheat seedlings and the changes in peroxidase (POD) and catalase (CAT) activities in plants were investigated. Differences in the breakdown of added formaldehyde between fresh and boiled plant extracts were determined to calculate the contributions of different removal mechanisms. Two plant seedlings efficiently removed formaldehyde from air when its level varied from 0.65 to 1.91 mg m^-3; meanwhile, the maximum rate at which tomato seedlings transported formaldehyde from air to the rhizosphere solution reached 182.26 µg h^-1 kg^-1 FW (fresh weight). Metabolism in plants was mainly responsible for the formaldehyde dissipation. The enzymatic contribution to formaldehyde dissipation decreased with increasing shoot exposure time or air formaldehyde level, while the redox contribution increased in importance because of an increasing level of ROS. The different enzymatic antioxidant activities of plants resulted in different levels of ROS and hence different tolerance and removal efficiencies toward formaldehyde. The self-enhancing ability of plants to remove formaldehyde via redox reactions suggested that the formaldehyde removal efficiency could be enhanced by plant adaptation to environmental stress.

Towards practical indoor air phytoremediation: A review

Indoor air quality has become a growing concern due to the increasing proportion of time people spend indoors, combined with reduced building ventilation rates resulting from an increasing awareness of building energy use. It has been well established that potted-plants can help to phytoremediate a diverse range of indoor air pollutants. In particular, a substantial body of literature has demonstrated the ability of the potted-plant system to remove volatile organic compounds (VOCs) from indoor air. These findings have largely originated from laboratory scale chamber experiments, with several studies drawing different conclusions regarding the primary VOC removal mechanism, and removal efficiencies. Advancements in indoor air phytoremediation technology, notably active botanical biofilters, can more effectively reduce the concentrations of multiple indoor air pollutants through the action of active airflow through a plant growing medium, along with vertically aligned plants which achieve a high leaf area density per unit of floor space. Despite variable system designs, systems available have clear potential to assist or replace existing mechanical ventilation systems for indoor air pollutant removal. Further research is needed to develop, test and confirm their effectiveness and safety before they can be functionally integrated in the broader built environment. The current article reviews the current state of active air phytoremediation technology, discusses the available botanical biofiltration systems, and identifies areas in need of development.

A review of measured bioaccumulation data on terrestrial plants for organic chemicals: Metrics, variability, and the need for standardized measurement protocols

Quantifying the transfer of organic chemicals from the environment into terrestrial plants is essential for assessing human and ecological risks, using plants as environmental contamination biomonitors, and predicting phytoremediation effectiveness. Experimental data describing chemical uptake by plants are often expressed as ratios of chemical concentrations in the plant compartments of interest (e.g., leaves, shoots, roots, xylem sap) to those in the exposure medium (e.g., soil, soil porewater, hydroponic solution, air). These ratios are generally referred to as "bioconcentration factors" but have also been named for the specific plant compartment sampled, such as "root concentration factors," "leaf concentration factors," or "transpiration stream (xylem sap) concentrations factors." We reviewed over 350 articles to develop a database with 7049 entries of measured bioaccumulation data for 310 organic chemicals and 112 terrestrial plant species. Various experimental approaches have been used; therefore, interstudy comparisons and data-quality evaluations are difficult. Key exposure and plant growth conditions were often missing, and units were often unclear or not reported. The lack of comparable high-confidence data also limits model evaluation and development. Standard test protocols or, at a minimum, standard reporting guidelines for the measurement of plant uptake data are recommended to generate comparable, high-quality data that will improve mechanistic understanding of organic chemical uptake by plants. Environ Toxicol Chem 2018;37:21-33. © 2017 SETAC.

Fate and adverse effects of hexabromocyclododecane diastereoisomers (HBCDDs) in a soil-ryegrass pot system

This study explored the fate and adverse effects of 3 main hexabromocyclododecane diastereoisomers (α-, β-, and γ-HBCDDs) in a soil pot system planted with ryegrass (Lolium perenne L.) using a short-term (8 weeks) experiment. At the end of the experiment, soil urease activity in planted spiked soil increased and catalase activity decreased; while there was no obvious change in sucrase and peroxidase activities. HBCDDs mainly accumulated in the root of ryegrass, with root concentration factors (RCF) in the range of 1.46-4.43 and only a small part was transferred to the stem (SCF: 0.198-0.305) and leaf (LCF: 0.042-0.062). The concentration factors varied for different HBCDD diastereoisomers, being in the order of α- > β- > γ-HBCDD for all tissues, indicating preferential accumulation of α-HBCDD in ryegrass tissues. Moreover, the enantiomeric analysis revealed an enrichment of (+)-α-, (-)-β- and (+)-γ-HBCDD enantiomers in ryegrass tissues. β- and γ-HBCDDs (up to 1.90% and 4.11%, respectively) were transformed to aα-HBCDD in ryegrass, while no isomerization product from α-HBCDD was found. Hydroxylated HBCDDs metabolites, such as monoOHHBCDDs and diOHHBCDDs were found in ryegrass tissues for the first time.

Foliar heavy metal uptake, toxicity and detoxification in plants: A comparison of foliar and root metal uptake

Anthropologic activities have transformed global biogeochemical cycling of heavy metals by emitting considerable quantities of these metals into the atmosphere from diverse sources. In spite of substantial and progressive developments in industrial processes and techniques to reduce environmental emissions, atmospheric contamination by toxic heavy metals and associated ecological and health risks are still newsworthy. Atmospheric heavy metals may be absorbed via foliar organs of plants after wet or dry deposition of atmospheric fallouts on plant canopy. Unlike root metal transfer, which has been largely studied, little is known about heavy metal uptake by plant leaves from the atmosphere. To the best of our understanding, significant research gaps exist regarding foliar heavy metal uptake. This is the first review regarding biogeochemical behaviour of heavy metals in atmosphere-plant system. The review summarizes the mechanisms involved in foliar heavy metal uptake, transfer, compartmentation, toxicity and in plant detoxification. We have described the biological and environmental factors that affect foliar uptake of heavy metals and compared the biogeochemical behaviour (uptake, translocation, compartmentation, toxicity and detoxification) of heavy metals for root and foliar uptake. The possible health risks associated with the consumption of heavy metal-laced food are also discussed.

Methanol-enhanced removal and metabolic conversion of formaldehyde by a black soybean from formaldehyde solutions

Methanol regulation of some biochemical and physiological characteristics in plants has been documented in several references. This study showed that the pretreatment of methanol with an appropriate concentration could stimulate the HCHO uptake by black soybean (BS) plants. The process of methanol-stimulated HCHO uptake by BS plants was optimized using the Central Composite Design and response surface methodology for the three variables, methanol concentration, HCHO concentration, and treatment time. Under optimized conditions, the best stimulation effect of methanol on HCHO uptake was obtained. 13C-NMR analysis indicated that the H13CHO metabolism produced H13COOH, [2-13C]Gly, and [3-13C]Ser in BS plant roots. Methanol pretreatment enhanced the metabolic conversion of H13CHO in BS plant roots, which consequently increased HCHO uptake by BS plants. Therefore, methanol pretreatment might be used to increase HCHO uptake by plants in the phytoremediation of HCHO-polluted solutions.

Uptake Pathway, Translocation, and Isomerization of Hexabromocyclododecane Diastereoisomers by Wheat in Closed Chambers

To study the uptake pathways of 3 main hexabromocyclododecane diastereoisomers (α-, β-, and γ-HBCDs) in wheat, four closed chambers were designed to expose wheat to HBCDs via air and/or soil for 4 weeks. The results showed that HBCDs could be absorbed by wheat both via root from soil and via leaf from air. The Rt values (ratio of HBCDs from root-to-leaf translocation to the total accumulation in leaves) ranging from 14.4 to 29.8% suggested that acropetal translocation within wheat was limited. A negative linear relationship was found between log Rt and log Kow of the HBCD diastereoisomers (p < 0.05). The bioconcentration factors (BCFs, (μg/g wheat tissues)/(μg/g soil)) were in the order α- > β- > γ-HBCD in wheat roots and stems, being negatively related to their Kow values. No such correlation was found in leaves, where the HBCDs came mainly from air distribution. The results of enantiomeric fractions indicated that the (-)-enantiomer of α- and γ-HBCDs and the (+)-β-enantiomer were selectively accumulated. Furthermore, β- and γ-HBCDs were transformed to α-HBCD in the wheat, with 0.309-4.80% and 0.920-8.40% bioisomerization efficiencies at the end of the experiment, respectively, being the highest in leaves. Additionally, no isomerization product from α-HBCD was found.