Selective recovery of Pd(II) from extremely acidic solution using ion-imprinted chitosan fiber: Adsorption performance and mechanisms

Rapid separation of the low concentration Pd from Pd-Pt coexisting systems: Cyano-group's monomer-specific affinity

Rapid separation of low concentration palladium (Pd) from Pd-Platinum (Pt) coexisting systems remains a formidable challenge, primarily due to the undifferentiated substitution of ligands in Pd/Pt complexes by adsorption sites. The development of an adsorbent featuring monomer-specific affinity adsorption sites for Pd/Pt could mitigate this drawback. Herein, Manganese hexacyanoferrate (MnHCF) possessing the sensitivity and specificity to Pd ions (Pd(II)) was synthesized via the facile co-precipitation method. MnHCF could rapidly and selectively capture 90.30 % of Pd(II) from a 10 ppm Pd-Pt coexisting system within just 5 min. Spectroscopic analyses and density functional theory (DFT) calculations indicated that cyano-group (CN) in MnHCF exhibited the monomer-specific affinity for targeted capturing Pd via the direct and strong coordination interaction (Fe-CN-PdCl2), which was co-determined by the electron-losing of C (0.06 e) and N (0.07 e) atom. At the same time, CN could neither react directly with the fully coordinated [PtCl6]2- species nor substitute the Cl- ligand, both of which contributed to the non-adsorption of Pt, thus triggering the Pd-Pt separation. This study provides a promising candidate adsorbent for practical applications in platinum group metals recovery by the design of adsorption sites with monomer-specific affinity.

Ion-imprinted membranes for lithium recovery: A review

This review critically examines the effectiveness of ion-imprinted membranes (IIMs) in selectively recovering lithium (Li) from challenging sources such as seawater and brine. These membranes feature customized binding sites that specifically target Li ions, enabling selective separation from other ions, thanks to cavities shaped with crown ether or calixarene for improved selectivity. The review thoroughly investigates the application of IIMs in Li extraction, covering extensive sections on 12-crown-4 ether (a fundamental crown ether for Li), its modifications, calixarenes, and other materials for creating imprinting sites. It evaluates these systems against several criteria, including the source solution's complexity, Li+ concentration, operational pH, selectivity, and membrane's ability for regeneration and repeated use. This evaluation places IIMs as a leading-edge technology for Li extraction, surpassing traditional methods like ion-sieves, particularly in high Mg2+/Li+ ratio brines. It also highlights the developmental challenges of IIMs, focusing on optimizing adsorption, maintaining selectivity across varied ionic solutions, and enhancing permselectivity. The review reveals that while the bulk of research is still exploratory, only a limited portion has progressed to detailed lab verification, indicating that the application of IIMs in Li+ recovery is still at an embryonic stage, with no instances of pilot-scale trials reported. This thorough review elucidates the potential of IIMs in Li recovery, cataloging advancements, pinpointing challenges, and suggesting directions for forthcoming research endeavors. This informative synthesis serves as a valuable resource for both the scientific community and industry professionals navigating this evolving field.

An Aryl-ether-linked Covalent Organic Framework Modified with Thioamide Groups for Selective Extraction of Palladium from Strong Acid Solutions

Efficient adsorption of palladium ions from acid nuclear waste solution is crucial for ensuring the safety of vitrification process for radioactive waste. However, the limited stability and selectivity of most current adsorbents hinder their practical applications under strong acid and intense radiation conditions. Herein, to address these limitations, we designed and synthesized an aryl-ether-linked covalent organic framework (COF-316-DM) grafted dimethylthiocarbamoyl groups on the pore walls. This unique structure endows COF-316-DM with high stability and exceptional palladium capture capacity. The robust polyarylether linkage enables COF-316-DM to withstand irradiation doses of 200 or 400 kGy of β/γ ray. Furthermore, COF-316-DM demonstrates fast adsorption kinetics, high adsorption capacity (147 mg g-1 ), and excellent reusability in 4 M nitric acid. Moreover, COF-316-DM exhibits remarkable selectivity for palladium ions in the presence of 17 interference ions, simulating high level liquid waste scenario. The superior adsorption performance can be attributed to the strong binding affinity between the thioamide groups and Pd2+ ions, as confirmed by the comprehensive analysis of FT-IR and XPS spectra. Our findings highlight the potential of COFs with robust linkers and tailored functional groups for efficient and selective capture of metal ions, even in harsh environmental conditions.

Toward a mechanistic understanding of Rhenium(VII) adsorption behavior onto aminated polymeric adsorbents: Batch experiments, spectroscopic analyses, and theoretical computations

Rhenium, a rare and critical metal, existing in the industrial wastewater has been aroused extensive interests recently, due to its environmental and resource issues. Chitosan, an easily available, low-cost and eco-friendly biopolymer, was prepared and modified by grafting primary, secondary, tertiary and quaternary amino groups, respectively. Adsorption behaviors and interactions between ReO4- and these four types of aminated adsorbents were investigated through batch experiments, spectroscopic analysis, and theoretical computations. Chitosan modified with secondary amines showed an extremely high uptake of ReO4- with 742.0 mg g-1, which was higher than any reported adsorbents so far. Furthermore, a relatively high adsorption selectivity for Re(VII), as well as the stable and facile regeneration of these aminated adsorbents revealed a promising approach for Re(VII) recovery in full-scale applications. The electrostatic attraction was illustrated to be the main adsorption mechanism by Fourier Transform Infrared Spectroscopy and X-ray Photoelectron Spectroscopy analyses. Significantly, the sub-steps of the adsorption process, encompassing the transformation of binding sites and the subsequent binding between these sites and the adsorbate, have been thoroughly investigated through the density functional theory (DFT) calculation method. This approach was firstly proposed to clearly demonstrate the differences in Re(VII) adsorption behavior onto four types of aminated adsorbents, resulting the importance of not only strong binding energy but also an appropriate binding spatial environmental for effective Re(VII) adsorption.

A novel hydrangea-like magnetic composite Fe3O4@MnO2@ZIF-67 for efficient selective adsorption of Pd(II) from metallurgical wastewater

The selective adsorption of palladium from wastewater is a feasible solution to solving palladium pollution and resource scarcity. Because traditional solvent extraction methods often involve the use of considerable amounts of organic solvents, research is focused on investigating adsorption techniques that can selectively remove palladium from wastewater. In this paper, the magnetic composite Fe3O4@MnO2@ZIF-67 was synthesized and its performance for the adsorption of Pd(II) in acidic water was investigated. Fe3O4@MnO2@ZIF-67 was characterized by various analytical methods such as TEM, SEM, EDS, BET, XRD, FTIR, zeta potential analysis, VSM, and TGA. The effects of palladium ion concentration, contact time, pH, and temperature on adsorption were evaluated. The kinetics were shown to follow the pseudo-second-order kinetic model and Elovich model, and the rate-limiting step was chemisorption. Thermodynamic studies showed that increasing the temperature promoted the adsorption of Pd(II), and the maximum uptake capacity of Fe3O4@MnO2@ZIF-67 for Pd(II) was 531.91 mg g-1. Interestingly, Fe3O4@MnO2@ZIF-67 exhibited superior selectivity for Pd(II) in the presence of Ir(IV), Pt(IV), and Rh(III). The adsorbent can be used repeatedly for selective adsorption of palladium. Even at the fifth cycle, the uptake rate of Pd(II) remained as high as 83.1%, and it showed a favorable adsorption capacity and selectivity for Pd(II) in real metallurgical wastewater. The adsorption mechanism was analyzed by SEM, FTIR, XRD, XPS, and DFT calculations, which indicated that electrostatic interactions and coordination with nitrogen-containing groups were involved. Fe3O4@MnO2@ZIF-67 is a promising adsorbent for the efficient adsorption and selective separation of palladium ions.

Adsorption of Pd(II) ions by electrospun fibers with effective adsorption sites constructed by N, O atoms with a particular spatial configuration: Mechanism and practical applications

The separation and recovery of palladium from electronic waste (e-waste) are of great significance as they can alleviate environmental pollution and avoid resource loss. Herein, a novel nanofiber modified by 8-hydroxyquinoline (8-HQ-Nanofiber) with adsorption sites co-constructed by N and O atoms of hard bases was fabricated, which has good affinity properties for the Pd(II) ions belonging to soft acid in the leachate of e-waste. The adsorption mechanism of 8-HQ-Nanofiber for Pd(II) ions was revealed from the perspective of molecular level relied on a series of characterizations, such as FT-IR, ss-NMR, Zeta potential, XPS, BET, SEM and DFT. The adsorption of Pd(II) ions on 8-HQ-Nanofiber reached equilibrium within 30 min and the maximum uptake capacity was 281 mg/g at 318.15 K. The adsorption behavior of Pd(II) ions by 8-HQ-Nanofiber was described by the pseudo-second-order and Langmuir isotherm models. The 8-HQ-Nanofiber exhibited relatively good adsorption performance after 15 times of column adsorption. Finally, based on hard and soft acids and bases (HSAB) theory, a strategy to regulate the Lewis alkalinity of adsorption sites by specific spatial structures is proposed, which provides a new direction for the design of adsorption sites.

Cost-effective removal of toxic methylene blue dye from textile effluents by new integrated crosslinked chitosan/aspartic acid hydrogels

Chitosan/aspartic acid hydrogels were synthesized for MB dye removal from textile aqueous effluents with different ratios by gelation of chitosan with non-toxic gelling agent, crosslinker, glutaraldehyde (Glu). The obtained hydrogels were characterized by spectral and morphological techniques. The characterization techniques confirmed successful preparations and MB dye adsorption. Batch experiments were done to investigate the effects of adsorbent dose, pH, contact time, temperature, and initial MB dye concentration. The optimum conditions were: adsorbent dose 0.1 g, pH 5, contact time 30 min, and temperature 25 °C for Chitosan-Aspartic Acid Hydrogel 1 (CSAA-HG1) and adsorbent dose 0.4 g, pH 2, contact time 60 min, temperature 25 °C for Chitosan-Aspartic Acid Hydrogel 2 (CSAA-HG2). Adsorption capacity of newly hydrogels CSAA-HG1,2 was compared with each other. Adsorption efficiencies reached 99.85 % for CSAA-HG1 and 99.88 % for CSAA-HG2. MB dye adsorption on CSAA-HG1,2 followed Freundlich isotherm model (R2 = 0.94 and 0.92, respectively). Both adsorbents exhibited pseudo-second-order kinetics for MB dye adsorption (R2 = 1). The negative ΔHo indicated that the MB dye adsorption was exothermic, negative ΔGo confirmed that MB dye adsorption process was spontaneous and low values of ∆So indicated low degree of freedom, ordered MB dye molecules on CSAA-HG1,2 surfaces.

Polyelectrolyte and polyelectrolyte complex-incorporated adsorbents in water and wastewater remediation - A review of recent advances

In recent years, polyelectrolyte-incorporated functional materials have emerged as novel adsorbents for effective remediation of pollutants in water and wastewater. Polyelectrolytes (PEs) are a special class of polymers with long chains of repeating charged moieties. Polyelectrolyte complexes (PECs) are obtained by mixing aqueous solutions of oppositely charged PEs. Herewith, this review discusses recent advances with respect to water and wastewater remediation using PE- and PEC-incorporated adsorbents. The review begins by highlighting some water resources, their pollution sources and available treatment techniques. Next, an overview of PEs and PECs is discussed, highlighting the evolving progress in their processing. Consequently, application of these materials in different facets of water and wastewater remediation, including heavy metal removal, precious metal and rare earth element recovery, desalination, dye and emerging micropollutant removal, are critically reviewed. For water and wastewater remediation, PEs and PECs are mostly applied either in their original forms, as composites or as morphologically-tunable complexes. PECs are deemed superior to other materials owing to their tunability for both cationic and anionic pollutants. Generally, natural and semi-synthetic PEs have been largely applied owing to their low cost, ready availability and eco-friendliness. Except dye removal and desalination of saline water, application of synthetic PEs and PECs is scanty, and hence requires more focus in future research.

Ion-Imprinted Polymeric Materials for Selective Adsorption of Heavy Metal Ions from Aqueous Solution

The introduction of selective recognition sites toward certain heavy metal ions (HMIs) is a great challenge, which has a major role when the separation of species with similar physicochemical features is considered. In this context, ion-imprinted polymers (IIPs) developed based on the principle of molecular imprinting methodology, have emerged as an innovative solution. Recent advances in IIPs have shown that they exhibit higher selectivity coefficients than non-imprinted ones, which could support a large range of environmental applications starting from extraction and monitoring of HMIs to their detection and quantification. This review will emphasize the application of IIPs for selective removal of transition metal ions (including HMIs, precious metal ions, radionuclides, and rare earth metal ions) from aqueous solution by critically analyzing the most relevant literature studies from the last decade. In the first part of this review, the chemical components of IIPs, the main ion-imprinting technologies as well as the characterization methods used to evaluate the binding properties are briefly presented. In the second part, synthesis parameters, adsorption performance, and a descriptive analysis of solid phase extraction of heavy metal ions by various IIPs are provided.

Preparation of a Montmorillonite-Modified Chitosan Film-Loaded Palladium Heterogeneous Catalyst and its Application in the Preparation of Biphenyl Compounds

The natural polymer chitosan was modified with polyvinyl alcohol to enhance the mechanical properties of the membrane, and then, the montmorillonite-modified chitosan-loaded palladium catalyst was prepared using the excellent coordination properties of montmorillonite. The results showed that the catalyst has good tensile strength, thermal stability, catalytic activity, and recycling performance and is a green catalytic material with industrial application potential.

Locust Bean gum-based hydrogels embedded magnetic iron oxide nanoparticles nanocomposite: Advanced materials for environmental and energy applications

This paper reports a simple method of designing and synthesizing magnetic iron oxide (IO) integrated locust bean gum-cl-polyacrylonitrile hydrogel nanocomposites (LBG-cl-PAN/IONP) by in situ mineralization of iron ions in a hydrogel matrix. A two-step gel crosslink method followed by co-precipitation method was used to prepare these novel hydrogels embedded with magnetic iron oxide nanoparticles. The LBG-cl-PAN/IONP hydrogel nanocomposite (HNC) were tested in batch adsorption experiments for their ability to remove a cationic dyes, methylene blue (MB) & Methyl violet (MV), from aqueous solution. In order to analyze the LBG-cl-PAN/IONP HNC, FTIR, XRD, XPS, VSM, TEM, and EDX techniques were applied. Numerous operating parameters were studied, including the amount of adsorbent, the contact time, pH, temperature, the dye concentration, and the coexisting ion concentration. According to the Langmuir isotherm model, MB and MV had maximum monolayer adsorptive capacities of 1250 and 1111 mg/g, respectively. LBG-cl-PAN/IONP HNC controlled IONP oxidation as well as sustained adsorptive removal over a wide pH range (7-10). The key mechanism of adsorption consisted of electrostatic interaction and ion exchange. For successful use in successive cycles after regeneration using HNO₃ as eluent, the LBG-cl-PAN/IONP HNC can easily be reused. As a material, the LBG-cl-PAN/IONP HNC is a promising sorbent or composite material for removing toxic dyes from water, and therefore can be applied to enhance water and wastewater treatment technology. Additionally, we have briefly evaluated LBG-cl-PAN/IONP HNC for antibacterial and supercapacitor applications. According to our knowledge, this is the first report describing the use of LBG-cl-PAN/IONP HNC multifunctional efficacy as an excellent sorbent, antibacterial and electrochemical supercapacitor applications.

Selective capture of Pd(II) from aqueous media by ion-imprinted dendritic mesoporous silica nanoparticles and re-utilization of the spent adsorbent for Suzuki reaction in water

The development of highly efficient adsorptive material for the selective capture of Pd(II), and re-utilization of spent Pd(II)-loaded adsorbent as an efficient catalyst for organic synthesis are of great significance, but challenging. Particularly, the heterogeneous palladium-catalyzed Suzuki reaction in aqueous media is much more challenging than that of homogeneous. Herein, several novel Pd(II) ion-imprinted polymers (PIIPs) based on dendritic fibrous silica particles are constructed by surface ion imprinting technology (SIIT), using Schiff base and pyridine groups functionalized organosilicon as functional monomer. The PIIP-3 prepared by 3 g of functional monomer exhibits the best adsorption performance, and shows ultrafast (10 min) and selective capture of Pd(II) with high uptake capacity (382.5 mg/g). Moreover, the waste Pd(II) loaded PIIP-3 (PIIP-3-Pd) can serve as a catalyst towards the Suzuki reaction in water, affording 94.2 % yield of the desired product. Interestingly, the PIIP-3-Pd can be reused 12 times without an appreciable decrease in catalytic activity, which is probably due to the imprinted cavity and specific recognition site of PIIP-3 can match and recapture Pd active species in a complex catalytic environment. Thus, this work demonstrates huge potentials of SIIT to enhance the selectivity of adsorption process and increase the lifetime of catalysts.

Rapid adsorption of acid dyes using Cu(II) thiourea modified cellulose complex

In the present work, the acid dyes namely, eriochrome cyanine R (ECR) and 2-(4-Sulfo phenyl azo)-1,8 dihydroxy-3,6 naphthalene disulfonic acid, trisodium salt (SPADNS) were effectively adsorbed by Cu(II)-thiourea modified cotton fibers (Cu(II)/Tu-MC) complex. FTIR, SEM, XPS analysis, thermogravimetric analysis, and potentiometric titration were utilized for characterization. The impact of the fundamental adsorption parameters was systematically investigated. The results reveal that the adsorption of ECR and SPADNS acid dyes occurs via a metal-coordination mechanism. Furthermore, the adsorption process follows the 2nd order kinetic model and Langmuir model adsorption isotherm. The Cu(II)/Tu-MC shows high adsorption capacities of 0.27 and 0.22 mmol/g for ECR and SPADNS, respectively. These findings indicate that the cationization of cellulose fibers with metal ions is a promising and efficient strategy toward enhancing the adsorption of acid dyes.

Effect of the length and aromaticity of N3-substituent on adsorption performance of imidazolium-based poly(ionic liquids) towards Pd (II)

Imidazolium-based poly(ionic liquids) (PILs) have been deemed as attractive candidates in the field of precious metal adsorption. However, their further performance optimization is hampered by a lack of an inner understanding of the structure-adsorption performance relationship. In this research, electron and charge distributions of the imidazolium cations are tailored by changing the N3-substitute, and their adsorption performances for PdCl₄^2- were optimized accordingly. Furthermore, the adsorption mechanism is studied by synthesizing corresponding ionic liquid (IL) monomers and their Pd-adducts. Interestingly, longer N3 alkyl chains lead to more hydrogen bonds with PdCl₄^2-, which is beneficial for adsorption. Whereas, it is unfavorable for attracting anions due to a decrease in electrostatic potential (ESP) around cations caused by longer alkyl chains and aromatic substituents at N3 position. It is worth noting that the ESP around the cations plays a more important role in the adsorption process, which determines the adsorption performance of the imidazolium-based PILs. Thus, the performance optimization of imidazolium-based PILs should mainly focus on increasing the ESP of imidazolium cations in the future. This research highlights the potential of the cationic structure-adsorption performance relationship of PILs, which opens a new avenue to develop adsorbents for the metallurgical industry.

Pd(II)-Imprinted Chitosan Adsorbent for Selective Adsorption of Pd(II): Optimizing the Imprinting Process through Box-Behnken Experimental Design

The ion/molecular imprinting technique is an efficient method for developing materials with high adsorption selectivity. However, it is still difficult to obtain an imprinted adsorbent with desirably high selectivity when the preparation processes are not well designed and optimized. In this present work, a chitosan-based ion-imprinted adsorbent was optimally prepared through Box-Behnken experimental design to achieve desirably high selectivity for Pd anions (PdCl₄ ^2-) from aqueous solutions with high acidity. The dosage of epichlorohydrin (ECH) used in the first and second steps of cross-linking as well as the pH of the imprinting reaction medium is likely one of the key factors affecting the selectivity of the synthesized ion-imprinted chitosan adsorbent, which were selected as factors in a three-level factorial Box-Behnken design. As a result, the effects of these three factors on Pd(II) selectivity were able to be described by using a second-order polynomial model with a high regression coefficient (R ²; 0.996). The obtained optimal conditions via the response surface methodology were 0.10% (v/v) of first cross-linking ECH, an imprinting pH of 1.0, and 1.00% of second cross-linking ECH. Competitive adsorption was performed to investigate the selectivities of the ion-imprinted chitosan adsorbents prepared under the optimal conditions. The selectivity coefficient of Pd(II) versus Pt(IV) (β_Pd/Pt) of the Pd(II)-imprinted adsorbent was 115.83, much greater than that of the chitosan adsorbent without imprinting and various reported selective adsorbents. Therefore, the Box-Behnken design can be a useful method for optimizing the synthesis of ion-imprinted adsorbents with desirably high adsorptive selectivity for precious metals.

Selective adsorption of ofloxacin and ciprofloxacin from a binary system using lignin-based adsorbents: Quantitative analysis, adsorption mechanisms, and structure-activity relationship

A series of actinia-shaped lignin-based adsorbents (LNAEs) featuring lignin (LN) as the core and grafted poly(acrylic acid) (PAA) as the tentacle were designed and fabricated. Two fluoroquinolones (FQs) with similar molecular structures, ofloxacin (OFL) and ciprofloxacin (CIP), were used as targets to study the selective adsorption performance of LNAEs associated with the structural effects of the LN-based adsorbents in FQs binary aqueous system. The adsorption of the two FQs by LNAEs complied with the competitive Langmuir isothermal model, and showed selective removal of CIP over OFL due to the additional negative charge-assisted hydrogen bond (CAHB) formed between the carboxyl group of LNAEs and the secondary amino group of CIP, in addition to the effects of electrostatic attraction and normal hydrogen bonds, according to quantitative studies and density functional theory analysis. A binary nonlinear model based on phenomenological theory was applied to study the effects of PAA branched-chain length and distribution on the selective adsorption performance of the LN-based adsorbents. Accordingly, the branched-chain distribution played a more important role and higher distribution density of branched PAA could expose more adsorption sites on LNAEs' surface and improve the adsorptive selectivity. This study offers a well understanding of the structure-activity relationship of the surface grafting-modified adsorbents in binary pollutant systems and fundamental guidance for the exploitation and design of novel and efficient adsorbents.

Effective adsorption of mercury by Zr(IV)-based metal-organic frameworks of UiO-66-NH2 from aqueous solution

In this study, Zr-based metal-organic frameworks (MOFs) of UiO-66 and UiO-66-NH₂ were synthesized and applied to removal of mercury from aqueous solution. The characterizations of UiO-66 and UiO-66-NH₂ were examined by X-ray diffraction (XRD), scanning electron microscope (SEM), and thermogravimetric analysis (TGA). To investigate the adsorption properties of UiO-66-NH₂ for mercury, the experiments of kinetics, isotherm, pH, temperature, and salt concentration were conducted, and the results were compared with those by UiO-66. The result showed that UiO-66-NH₂ has a higher adsorption capacity for mercury than UiO-66. The maximum adsorption capacity of UiO-66-NH₂ was 223.8 ± 17.8 mg g^-1 at 313 K. The salt concentration of NaCl has a significant effect on the adsorption of mercury on UiO-66, while UiO-66-NH₂ can maintain the stable adsorption capacity for mercury in the concentration range of 0.1-0.5 M NaCl. Adsorption thermodynamics result indicated that the adsorption process of mercury on UiO-66-NH₂ was spontaneous and endothermic. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses showed that the mercury was successfully adsorbed on the surface of UiO-66-NH₂ and amino functional group as a soft base played a major role to react with mercury during the adsorption process. Graphical abstract.

Phosphate sequestration by magnetic La-impregnated bentonite granules: A combined experimental and DFT study

To use the lanthanum hydroxide (La(OH)₃) as a low-cost, highly-efficient, and recyclable adsorbent, it could be embedded on a magnetic substance to improve its physical features and lower the overall cost. Herein, novel millimetric-size magnetic lanthanum-modified bentonite (La-MB) granules were fabricated for P sequestration, and the adsorption performance and mechanisms were systematic studied. The maximum capacity of P uptake by La-MB was up to 48.4 mg/g, which was higher than many previous reported La-based adsorbents. Moreover, the enhanced uptake of P was achieved over a wide pH range (3-9) and in the coexistence of common anions (Cl^-, NO₃^-, and SO₄^2-). Besides, the exhausted La-MB can be effectively regenerated by 5 mol/L NaOH with about 94.5% desorption efficiency and 60.8% uptake capacity remained during 5 cycles. The La-MB also exhibited excellent performance of anti-interference in two kinds of real wastewaters. The postsorption characterization and DFT calculations revealed that the electrostatic interaction and chemical precipitation jointly facilitated phosphate sequestration by La-MB during the rapid sorption phase, while ligand exchange and complexation reaction played more important roles than others during the slow sorption step. The electrostatic interaction not only effectively promoted the ligand exchange, and also further accelerated chemical precipitation via the formation of LaPO₄ during the whole process of phosphate uptake. Overall, millimetric La-MB is considered to have great potential for engineering application, and this work also provides new insights into the molecular-level mechanism of phosphate sequestration by La-MB.

Recovery of gold via adsorption-incineration techniques using banana peel and its derivatives: Selectivity and mechanisms

In this study, banana peel (BP) and its derivatives after sequential extraction of biochemical components were evaluated for selective recovery of gold. In-depth instrumental characterizations including XPS, FTIR, XRD and HR-TEM were performed to understand the adsorption mechanisms. The biomass after lipid extraction, BP-L, demonstrated very good affinity and selectivity towards gold. In multi-metal systems containing 100 mg/L of Pt(IV), Au(III), Pd(II), Zn(II), Co(II), Ni(II) and Li(I), the selectivity coefficient increased from 978.45 in BP to 2034.70 in BP-L. Moreover, the equilibrium gold uptake was improved and reached 475.48 ± 3.08 mg/g owing to reduction-coupled adsorption mechanisms. The BP-L also showed improved gold nanoparticle formation properties that were pH-dependent. In a strategic adsorption-combined incineration process, metallic gold reaching 99.96% in purity was obtained. The BP and its derivative, BP-L have thus shown potentials for multiple applications in the areas of precious metal recovery and nanoscience.

Selective chelating precipitation of palladium metal from electroplating wastewater using chitosan and its derivative

A study on selective chelating precipitation of palladium metal from real electroplating wastewater using chitosan and its water-soluble derivative was conducted. The pH parameter, the concentrations of chitosan and its water-soluble derivative and the chelating precipitation time were experimentally investigated, and the optimum conditions were determined. The results revealed that both chitosan and its water-soluble derivative acted as chelating precipitation agents. Rapid chelating precipitation occurred when chitosan was added to real electroplating wastewater containing the chitosan derivative, thereby improving removal efficiency of palladium in different forms up to 95% under the optimum condition of 0.2 g/L chitosan and 0.16 mg/L derivative at pH 2.5. Then, dissolution experiments showed that chelating precipitation products could be dissolved in aqua regia. Additionally, selective chelating precipitation of palladium by chitosan and its derivative was characterized using X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. Thus, it can be concluded that the combined utilization of chitosan and its water-soluble derivative is a promising approach method for the removal of different forms of palladium from real electroplating wastewater.

Highly efficient and acid-resistant metal-organic frameworks of MIL-101(Cr)-NH2 for Pd(II) and Pt(IV) recovery from acidic solutions: Adsorption experiments, spectroscopic analyses, and theoretical computations

Cr-based metal-organic frameworks (MOFs) of MIL-101(Cr)-NH₂ was post-synthesized from nitro-functionalized MIL-101(Cr) (MIL-101(Cr)-NO₂) through a reduction process. Adsorption behaviors and interactions of MIL-101(Cr)-NH₂ and MIL-101(Cr)-NO₂ with platinum group metal (PGM) anions of Pd(II) (PdCl₄^2-) and Pt(IV) (PtCl₆^2-), were investigated through batch adsorption experiments, spectroscopic analyses, and theoretical computations. According to adsorption kinetics and isotherms, the uptakes of Pd(II) and Pt(IV) by in MIL-101(Cr)-NH₂ were found to be much higher than their uptakes by MIL-101(Cr)-NO₂. The abundant protonated amine groups (BDC-NH₃⁺) in MIL-101(Cr)-NH₂ were verified to be the main adsorptive binding sites by XPS and FTIR spectroscopy, and FE-SEM imageries. Additionally, BDC-NH₃⁺ shows extremely high affinities (b value) and binding energies (E_bind) for PdCl₄^2- and PtCl₆^2- through electrostatic attraction, resulting in much higher adsorption capacities of MIL-101(Cr)-NH₂ for these PGMs as compared to those of MIL-101(Cr)-NO₂. Moreover, the MOFs' Cr nodes without terminal -OH indicated positive electrostatic potentials, and certain values of E_bind for PGM anions. Thus, the few-amount cationic Cr sites could also make little contributions to the adsorption of PGM anions in MIL-101(Cr)-NH₂ or MIL-101(Cr)-NO₂. Furthermore, the perfect regeneration and reusability of MIL-101(Cr)-NH₂ over five of adsorption-desorption cycles, suggesting its potential in practical applications.

Ion-imprinted chitosan fiber for recovery of Pd(II): Obtaining high selectivity through selective adsorption and two-step desorption

Selective separation of platinum group metals from acidic solutions is of great importance due to their cumulative supply risk and environmental concern. In this study, a Pd(II) ion-imprinted chitosan fiber (ICF) was prepared as the novel adsorbent, and a well-designed two-step desorption process was implemented for selectively recovering Pd(II) from acidic solution containing Pd(II) and interfering metals of Co(II), Ni(II), Cu(II) and Pt (IV). The ICF showed higher selectivity for Pd(II) adsorption, comparing the non-imprinted chitosan fiber (NICF) towards other metals adsorption. The first selective desorption was achieved by NaOH solution, since only Pt (IV) adsorbed on the ICF in a small amount could be eluted, without any acting on Pd(II) ions. The second desorption process was carried out using acidified thiourea solution for the exclusive Pd(II) ions desorption. Therefore, much higher selective recovery of Pd(II) was achieved through ICF with a good selective adsorption performance and a well-designed desorption process. Furthermore, the mechanisms of selective adsorption and desorption were investigated by X-ray photoelectron spectra (XPS) and X-ray diffraction (XRD) analyses. Finally, ICF-packed column system was conducted using synthetic multiple metals solution and a practical hydrometallurgy wastewater as influent, respectively, with a good adsorption capacity of 87.2 mg g^-1 and 94.2 mg g^-1, resulting quite high concentrated effluent consisted of 97.4% of Pd(II) and 99.5% of Pd(II), respectively. It was opened up a promising designed material and technique for selectively recovering Pd(II) in the further practical large-scale application.

A comparative study of the physiological and biochemical properties of tomato (Lycopersicon esculentum M.) and maize (Zea mays L.) under palladium stress

There is great concern about the environmental impact and toxicity of palladium (Pd) because of its widespread use in automotive catalytic converters and other applications. Pd migrates and transforms in the environment and is absorbed by plant roots where it affects plant growth and eventually enters the food chain. Here we explored the effects of Pd on the physicochemical and biochemical characteristics of C3 (tomato) and C4 (maize) plants. We measured physicochemical and biochemical properties, including chlorophyll, protein, soluble sugar, antioxidant enzymes, malondialdehyde, proline, and root activity, in tomato and maize seedlings after cultivation in different concentrations of PdCl₂ solution (0, 0.2, 0.5, and 1 mM) in order to observe how Pd stresses them. Results showed that, with increasing Pd concentration, chlorophyll a and chlorophyll b contents and root activity decreased. Meanwhile, malondialdehyde, proline, protein, and soluble sugar contents increased. After cultivation in 1 mM PdCl₂, the Pd contents in the roots, stems, and leaves of tomato seedlings were 12.389, 1.132, and 0.206 mg/g, respectively. In general, Pd has significant effects on the physiological and biochemical properties of both tomato and maize. Additionally, tomato seedlings were more sensitive to Pd stress, photosynthesis in maize was less inhibited by Pd and the antioxidant capability of maize was stronger. These results indicated that maize (C4 plant) exhibited a higher tolerance to Pd than tomato (C3 plant). Pd migration in tomato was observed and the translocation factor (TF) was calculated. The values of TF_stem/root, TF_leaf/root, TF_leaf/stem, and TF_shoot/root were 0.09, 0.02, 0.18, and 0.11 in tomato seedlings, respectively. Pd accumulated most in the roots, followed in turn by stems, leaves, and only trace amount of Pd was transferred into shoots.

Synthesis of imprinted chitosan/AuNPs/graphene-coated MWCNTs/Nafion film for detection of lead ions

An ultrasensitive electrochemical platform based on ion-imprinted nanocomposites for monitoring Pb²⁺ was proposed for environmental protection and food safety applications.

Optimization of adsorption configuration by DFT calculation for design of adsorbent: A case study of palladium ion-imprinted polymers

Trial-and-error method is widely used to seek an efficient adsorbent, although it is time- and money-consuming. Rationally design of functional materials via theoretical calculation is an emerging and appealing strategy in material science. However, exploiting of theoretical calculation for assistance of adsorbent design is rarely to be attempted despite it is usually utilized to explore the adsorption mechanism. In this work, density functional theory (DFT) calculation is exploited to design an adsorbent with high adsorption capacity and selectivity. The well-known palladium ion-imprinted polymer (IIP) was used as a model adsorbent. Then, three types of given adsorption configurations (a-Pd-IIP, b-Pd-IIP and c-Pd-IIP) were optimized. Further, their adsorption energies were calculated by DFT, which were -13.978 eV for b-Pd-IIP, -8.764 eV for a-Pd-IIP and -3.587 eV for c-Pd-IIP, respectively. The correlation coefficient (R²) between the theoretical adsorption energy and the experimental adsorption capacity reached to as high as 0.985. In addition, the dynamics and selectivity experimental results further consolidated the tendency of the calculation result. All these results demonstrate that the adsorption energy derived from DFT calculations is an important factor in guiding the design of IIPs.

The addition of a quaternary group in biopolymeric material increases the adsorptive capacity of Acid Blue 25 textile dye

The quaternization of chitosan molecules creates materials with high adsorptive capacity towards textile dyes, which renders them capable of rapidly removing such dyes from a solution. In this study, a novel material was synthesized in bead form to adsorb the Acid Blue 25 textile dye. The adsorption isotherms, kinetics, and thermodynamics of this new material were investigated. The beads were further characterized by FT-IR and SEM studies, as well as their rheological behavior. Bioassays with Daphnia similis analyzed the toxicity of the dye before and after treatments. The Freundlich isotherm model fitted to all the adsorption data in a pH range from 2.50 to 8.50. Kinetic studies showed that adsorption was ruled by an intraparticle diffusion process and reached equilibrium in 270 min, as 39.527 μg mg^-1 of dye was sorbed to the beads. Thermodynamic studies showed that adsorption was a spontaneous and endothermic process. Thermodynamics also confirmed that the adsorption was proportionally influenced by higher temperatures. The FT-IR spectroscopy identified the adsorbate/adsorbent binding sites, thus confirming the occurrence of chemisorption. Post-treatment bioassays found a significant decrease in toxicity, obtaining just 10% of D. similis mortality after adsorption treatments. Therefore, the synthesized beads from this research can potentially be applied to the treatment of textile effluents.

Encapsulated green magnetic nanoparticles for the removal of toxic Pb2+ and Cd2+ from water: Development, characterization and application

Current research is based on an innovative approach of the fabrication of encapsulated sustainable, green, phytogenic magnetic nanoparticles (PMNPs), to inhibit the generation of secondary pollutants (Iron/Fe^o) during water treatment applications. These novel bio-magnetic membrane capsules (BMMCs) were prepared using two-step titration gel crosslink method, with polyvinyl alcohol and sodium alginate matrix as the model encapsulating materials to eliminate potentially toxic metals (Pb²⁺ and Cd²⁺) from water. The development of BMMCs was characterized by FTIR, XRD, XPS, SEM, VSM, TGA and EDX techniques. The effects of various operating parameters, adsorbent dose, contact time, solution pH, temperature, initial concentration of metals cations and co-existing ions were studied. The hysteresis loops have illustrated an excellent super-paramagnetic nature, demonstrating the smooth encapsulation of PMNPs without losing their magnetic properties. The maximum monolayer adsorptive capacities estimated at pH 6.5 by the Langmuir isotherm model were 548 and 610.67 mg/g for Pb²⁺ and Cd²⁺, respectively. The novel BMMCs did not only control oxidation of PMNPs but also sustained the adsorptive removal over a wide range of pH (3-8), and the electrostatic interaction and ion-exchange were the core adsorption mechanisms. The BMMCs could easily be regenerated using 25% HNO₃ as an eluent for successful usage in seven repeated cycles. Therefore, the BMMCs as a material can be used as an excellent sorbent or composite material to remove toxic metals Pb²⁺ and Cd²⁺, showing strong potential for improving water and wastewater treatment technologies.

Super-Stable, Highly Efficient, and Recyclable Fibrous Metal-Organic Framework Membranes for Precious Metal Recovery from Strong Acidic Solutions

Precious metals such as palladium (Pd) and platinum (Pt) are marvelous materials in the fields of electronic and catalysis, but they are tapering day by day. Zr(IV)-based metal-organic frameworks (MOFs) are competent for their recovery, notably in harsh environments, while the general powder form limits their practical application. Porous MOF-based membranes with ultraefficient metal ion permeation, strong stability, and high selectivity are, therefore, strikingly preferred. Herein, a set of polymeric fibrous membranes incorporated with the UiO-66 series are fabricated; their adsorption/desorption capabilities toward Pd(II) and Pt(IV) are evaluated from strongly acidic solutions; and the MOF-polymer compatibilities are investigated. Polyurethane (PU)/UiO-66-NH₂ showed strong acid resistance and high chemical stability, which are attributable to strong π-π interactions between PU and MOF nanoparticles with a high configuration of energy. The as-fabricated MOF membranes show extremely good adsorption/desorption performances without ruptures/coalitions of nanofibers or leak of MOF nanoparticles, and successfully display the efficacy in a gravity-driven or even continuous-flow system with good recycle performance and selectivity. The as-fabricated MOF membranes set an example of potential MOF-polymer compatibility for practical applications.

Performance of chitosan engraved iron and lanthanum mixed oxyhydroxide for the detoxification of hexavalent chromium

The iron - lanthanum mixed oxyhydroxide (FLMOH) and chitosan engraved iron - lanthanum mixed oxyhydroxide materials (CSFLMOH) were prepared successfully and utilized for the hexavalent chromium adsorption studies. The physicochemical properties of pristine and Cr(VI) treated adsorbents were characterized using XRD, FTIR, SEM with EDX, TGA and DSC analysis. The efficacy of the CSFLMOH was compared with FLMOH towards the uptake of Cr(VI) ions and was explored using batch technique under various influencing parameters viz., time, dose, pH, initial concentration and co-existing anions. Langmuir, Freundlich and Dubinin - Radushkevich isotherms were used to analyze the adsorption behavior at 303, 313 and 323 K. The rate of the reaction was calculated using reaction based and diffusion-based models. Recycle and reuse studies were demonstrated using 0.05 M NaOH as the desorbing medium.

Evaluation of polybenzimidazole-based polymers for the removal of uranium, thorium and palladium from aqueous medium

Four types of polybenzimidazole (PBI)-based polymers (m-PBI, p-PBI, pyridine-based m-PBI and alkylated m-PBI) have been prepared and characterized. Extraction behaviour of heavy metal ions, viz. U(VI), Th(IV) and Pd(II), with these polymers was investigated. Distribution ratios for the extraction of these metal ions were measured as a function of nitric acid concentration. Extraction data reveal that, in general, p-PBI exhibits a higher distribution ratio for U(VI), Th(IV) and Pd(II) compared with the other polymeric resins evaluated in the present study. Column chromatography experiments were carried out with a solution of U(VI), Th(IV) and Pd(II) in dilute nitric acid media using columns packed with m- and p-PBI polymeric material for understanding the sorption and elution behaviour. The p-PBI-based resin has shown higher palladium sorption capacity (1.8 mmol g^-1). The studies also established that p-PBI resin is a potential candidate material for the recovery of U(VI) and Th(IV) (capacity 0.22 mmol g^-1 and 0.13 mmol g^-1) from an aqueous stream, e.g. mine water samples.

Synthesis and characterization of novel ion-imprinted guanyl-modified cellulose for selective extraction of copper ions from geological and municipality sample

The new ion-imprinted guanyl-modified cellulose (II.Gu-MC) was prepared for the separation and determination of Cu (II) ions in different real samples. Several techniques such as Fourier Transform Infrared (FT-IR), scanning electron microscope (SEM), thermal analysis, potentiograph and elemental analysis have been utilized for the characterization of II.Gu-MC. The adsorption behavior of the ion imprinted polymer (II.Gu-MC) was evaluated and compared to the non ion-imprinted polymer (NII.Gu-MC) at the optimum conditions. The selectivity and the adsorption capacity were greatly enhanced by using the ion-imprinted polymer, indicating its validation for the separation and determination of Cu²⁺ ions in different matrices. The adsorption capacity by chelating fibers II.Gu-MC & NII.Gu-MC agreed with the second-order model, and the sorption-isotherm experiments revealed best agreement with Langmuir model. The adsorption capacity of II.Gu-MC and NII.Gu-MC were 115 and 55 mg·g^-1, respectively. The II.Gu-MC was successfully employed for the selective separation and determination of Cu(II) ions with high accuracy.