Interaction of ciprofloxacin and probe compounds with palygorskite PFl-1

Assessing sorption of fluoroquinolone antibiotics in soils from a Kd compilation based on pure organic and mineral components

The presence of fluoroquinolone (FQ) antibiotics in soils may cause a threat to human health due to overexposure and the generation of antibiotic resistance genes. Understanding their sorption behavior in soils is important to predict subsequent FQ (bio) availability. Here, FQ sorption in pure soil organic (i.e., humic substances) and mineral (i.e., metal oxides; phyllosilicates) components is evaluated through a solid-liquid distribution coefficient (Kd (FQ)) dataset consisting of 243 entries originated from 80 different studies, to elucidate their respective contribution to the overall Kd (FQ) in bulk soils. First, different factors affecting FQ sorption and desorption in each of these soil phases are critically discussed. The strong role of pH in Kd (FQ), due to the simultaneous effect on both FQ speciation and surface charge changes, encouraged the derivation of normalized sorption coefficients for the cationic, zwitterionic and anionic FQ species in humic substances and in different phyllosilicates. Kd (FQ) in metal oxides revealed a key role of metal nature and material specific surface area due to complexation sorption mechanisms at neutral pH. Cumulative distribution functions (CDF) were applied to each dataset to establish a sorption affinity range for each phase and to derive best estimate Kd (FQ) values for those materials where normalized sorption coefficients to FQ species were unavailable. The data analysis conducted in the different soil phases set the basis for a Kd (FQ) prediction model, which combined the respective sorption affinity of each phase for FQ and phase abundance in soil to estimate Kd (FQ) in bulk soils. The model was subsequently validated with sorption data in well characterized soils compiled from the literature.

Highly efficient adsorption of ciprofloxacin from aqueous solutions by waste cation exchange resin-based activated carbons: Performance, mechanism, and theoretical calculation

This study focused on the preparation of a highly efficient activated carbon adsorbent from waste cation exchange resins through one-step carbonization to remove ciprofloxacin (CIP) from aqueous solutions. Scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectrometry, and X-ray photoelectron spectroscopy were used to characterize the physicochemical properties of the carbonized materials. The CIP removal efficiency, influencing factors, and adsorption mechanisms of CIP on the carbonized resins were investigated. Density functional theory (DFT) computations were performed to elucidate the adsorption mechanisms. The CIP removal reached 93 % when the adsorbent dosage was 300 mg/L at 25 °C. The adsorption capacity of the carbonized resins to CIP gradually decreased with an increasing pH from 3.0 to 7.0 and sharply declined with a pH from 7.0 to 11.0. The adsorption process better fitted by the pseudo second-order kinetic and Langmuir models, indicating that the interaction between CIP and the carbonized resins was monolayer adsorption. The maximum adsorption capacity fitted by the Langmuir model was 384.4 mg/g at 25 °C. Microstructural analysis showed that the adsorption of CIP on the carbonized resins was a joint effect of H-bonding, ion exchange, and graphite-N adsorption. Computational results signified the strong H-bonding and ion exchange interactions existed between CIP and carbonized resins. The high adsorption and reusability suggest that waste cation exchange resin-based activated carbons can be used as an effective and reusable adsorbent for removing CIP from aqueous solutions.

Investigation into Brazilian Palygorskite for Its Potential Use as Pharmaceutical Excipient: Perspectives and Applications

Palygorskite is an aluminum and magnesium silicate characterized by its fibrous morphology, providing it with great versatility in industrial applications, including pharmaceuticals. Although most of the reserves are in the United States, in recent years occurrences of commercially exploited deposits in Brazil have been recorded, mainly in the country's northeast region. This has motivated this study, which analyzes raw Brazilian palygorskite compared to a commercial sample (Pharmasorb^® colloidal) to demonstrate its pharmaceutical potential. The chemical and mineral composition of the samples were evaluated for surface properties, granulometry, morphology, crystallography, thermal analysis, and spectroscopy. Raw palygorskite presented 67% purity, against 74% for Pharmasorb^® colloidal. The percentage purity relates to the presence of contaminants, mainly carbonates and quartz (harmless under conventional conditions of pharmaceutical use). Furthermore, it was possible to confirm the chemical composition of these phyllosilicates, formed primarily of silicon, aluminum, and magnesium oxides. The crystallographic and spectroscopic profiles were consistent in both samples, showing characteristic peaks for palygorskite (2θ = 8.3°) and bands attributed to fibrous phyllosilicates below 1200 cm^-1, respectively. The thermal analysis allowed the identification of the main events of palygorskite, with slight differences between the evaluated samples: loss of water adsorbed onto the surface (~85 °C), removal of water contained in the channels (~200 °C), coordinated water loss (~475 °C), and, finally, the dehydroxylation (>620 °C). The physicochemical characteristics of raw palygorskite align with pharmacopeial specifications, exhibiting a high specific surface area (122 m²/g), moderately negative charge (-13.1 mV), and compliance with the required limits for heavy metals and arsenic. These favorable technical attributes indicate promising prospects for its use as a pharmaceutical ingredient in the production of medicines and cosmetics.

Removal of pharmaceuticals from water using sewage sludge-derived biochar: A review

In recent years, considerable attention has been paid to the beneficial utilization of sewage sludge to reduce the risks associated with sludge disposal. Besides other applications of sludge, biochar produced from sludge has also been employed for the elimination of various pollutants from water. This review critically evaluates the recent progress in applications of sludge-based biochar for the adsorption of pharmaceuticals from water. The synthesis techniques of biochar production from sludge and their effects on physicochemical characteristics of produced biochar are discussed. The removal of various pharmaceuticals by sludge-based biochar are described in detail, with the emphasis on the adsorption mechanism and their reusability potential. It is evident from the literature that sludge-based biochar has demonstrated excellent potential for the adsorption of numerous pharmaceuticals from the aqueous phase. The major hurdles and issues related to the synthesis of sludge-based biochar and applications are highlighted, with reference to the adsorption of pharmaceuticals. Finally, a roadmap is suggested along with future research directions to ensure the sustainable production of biochar from sludge and its applications in water treatment.

Ciprofloxacin releasing gellan gum/polydopamine based hydrogels with near infrared activated photothermal properties

In this work, with the aim to obtain a wound dressing hydrogel, an amine derivative of gellan gum was crosslinked in the presence of 4arm-polyethylenglycole-vinylsulfone. Through this easy and reproducible chemical procedure, a hydrogel with advanced elastic properties and hydrolytic resistance under physiological conditions was obtained. The incorporation of different quantities of polydopamine in the gelling solutions allows to obtain different hydrogels with marked photothermal properties when irradiated with a laser in the near infrared at 810 nm. The organic nanoparticles, reacting with the amino groups of the polysaccharide derivative, contribute to increase the storage moduli of the hydrogels. Ciprofloxacin was loaded into the hydrogel with higher amount of polydopamine and drug delivery experiments were performed to investigate the effect of irradiation on the antibiotic release profile. Antimicrobial studies, evaluated against S. aureus and P. aeruginosa, revealed that generated hyperthermia exerts a direct inhibition on the pathogens growth and, in the case of S. aureus, adjuvates the ciprofloxacin antimicrobial effect.

Preparation, characterization and antimicrobial assessment of selected ciprofloxacin salts

The formation of salts is considered a simple strategy to modify the physicochemical properties of active pharmaceutical ingredients. In this study, seven novel binary and ternary organic salts of ciprofloxacin (CP) were prepared with benzoic acid (BA), acetylsalicylic acid (ASA), p-coumaric acid (PCMA) and p-aminosalicylic acid (PASA). They were characterized by spectroscopic techniques and differential scanning calorimetry. Solubility and partition coefficients values were also measured. Evaluation of the antimicrobial activity of the organic salts against Staphylococcus aureus and Staphylococcus epidermidis revealed that most of the new salts had higher antimicrobial activity than CPHCl against both strains. The most active compounds against S. epidermidis and S. aureus were CP-PASA and CPPCMA, resp., which were up to fourteen times more potent than parent CP-HCl. Our findings indicated a strong correlation between the lipophilicity of the formed salts and their antimicrobial activity and showed that an optimum value of lipophilicity (log P = 0.75) seemed to be necessary to maximize the antimicrobial activity. These findings highlighted the improved physical, thermal and antimicrobial properties of the new salts of CP that can aid in providing higher bioavailability than CP-HCl.

Sorption of pharmaceuticals and personal care products on soil and soil components: Influencing factors and mechanisms

The sorption of pharmaceuticals and personal care products (PPCPs) on soil and soil components makes an important contribution to the fate, migration and bioavailability of PPCPs. Previous reviews have mostly focused on the sorption of PPCPs on single soil components (e.g., minerals and soil organic matter). However, the sorption of PPCPs within the whole soil system has not been systematically analyzed. This paper reviews the recent progress on PPCP sorption on soil and soil components. We have evaluated the sorption of a wide range of PPCPs in research fields that are usually considered in isolation (e.g., humic acids (HAs), montmorillonite, kaolinite, and goethite), and established a bridge between PPCPs and sorbent. The sorption mechanisms of PPCPs, e.g., cation exchange, surface complexation, electrostatic interaction and hydrogen bonding, are discussed and critically evaluated. We also assessed the influence of environmental factors (pH, ionic strength, organic matter and temperature) on sorption. This review summarizes the knowledge of PPCPs sorption on soil gained in recent years, which can provide new strategies for solving the problem of antibiotic pollution.

Mechanistic insights into ethidium bromide removal by palygorskite from contaminated water

Ethidium bromide (EtBr)-containing wastewater can be hazardous to biodiversity when released into the soil and water bodies without treatment. EtBr can mutate living microbial cells and pose toxicity to even higher organisms. This work investigated the removal of EtBr from aqueous solutions by a naturally occurring palygorskite (PFl-1) clay mineral via systematic batch adsorption experiments under different physicochemical conditions. EtBr existed in an undissociated form at pH ~7, and was adsorbed on PFl-1 obeying the Freundlich isotherm model. The maximum EtBr adsorption capacity was 285 mmol/kg. The best fitted kinetic model for EtBr adsorption was the pseudo-second order model. The amounts of exchangeable cations desorbed from PFl-1 during EtBr adsorption was linearly correlated to the amounts of EtBr adsorbed, with a slope of 0.97, implying that a cation exchange-based adsorption mechanism was dominating. Additionally, dimerization of EtBr molecules via bromide release assisted an increased EtBr removal by PFl-1 at high adsorbate concentrations. Detailed x-ray diffraction, Fourier transform infrared, scanning electron imaging and energy dispersive x-ray analyses confirmed that EtBr adsorption occurred dominantly on the surface of palygorskite which mineralogically constituted 80% of the bulk PFl-1 adsorbent. A small portion of EtBr was also adsorbed by PFl-1 through intercalation onto the smectite impurity (10%) in PFl-1. This study suggested that PFl-1 could be an excellent natural material for removing EtBr from pharmaceutical and laboratory wastewater.

Interactions between Active Ingredient Ranitidine and Clay Mineral Excipients in Pharmaceutical Formulations

Excipients play an important role in pharmaceutical formulations. Many clay minerals, because of their large specific surface area and inert behaviour in reactions with active ingredients, are commonly used as excipients. In this study, the uptake of ranitidine (RT), the active ingredient of Zantac, on and released from palygorskite (Pal), kaolinite (Kao), and talc was evaluated under different physicochemical conditions. The results showed that the uptake of RT on these minerals was limited to the external surface areas only. Cation exchange and electrostatic interactions were responsible for the RT uptake on Pal and Kao, resulting in a monolayer sorption. In contrast, multilayer RT uptake was found on the talc surfaces. Under different desorbing conditions, significant amounts of sorbed RT remained on the solid surface after 5 h of desorption. The results suggest that the sorptive interactions between the active ingredients and the excipients may not be neglected in pharmaceutical formulations, should these minerals be used as additives and/or excipients.

Effect of phosphate on the adsorption of antibiotics onto iron oxide minerals: Comparison between tetracycline and ciprofloxacin

With the broadly application of antibiotics to treat infectious diseases in humans and animals, antibiotic contaminants such as tetracycline (TC) and ciprofloxacin (CIP) have been detected in soil environments, where iron oxide minerals and phosphate are ubiquitous. To date, the influence of phosphate on the adsorption behaviors of TC/CIP onto iron oxides is still poorly understood. In this study, the effects of phosphate on the adsorptions of TC and CIP onto iron oxide minerals were investigated. Adsorption isotherms showed that the adsorption affinities of TC and CIP onto the three iron oxide minerals were in the order of goethite > hematite > magnetite with or without phosphate, the trend was dominated by different surface area and amount of surface hydroxyl groups of iron oxide minerals. Meanwhile, TC contains more functional groups than CIP for bonding, which resulted in greater adsorption affinity of three iron oxides to TC than that to CIP. Interestingly, phosphate weakened TC adsorption, while enhanced CIP adsorption, on the three iron oxides. This observation was ascribed to that phosphate anion enhanced the surface negative charge of iron oxides, which reinforced the electrostatic repulsion between iron oxides and negatively charged TC, also reinforced the electrostatic attraction between iron oxides and positively charged CIP. Furthermore, the inhibitory effect of phosphate on TC adsorption was dramatically enhanced at high pH, while the promoting effect of phosphate on CIP adsorption was slightly changed with various pH. Our results highlight the importance of phosphate in exploring the environmental fate of antibiotics in natural environment.

Obtaining and Applying Nanohybrid Palygorskite-Rifampicin in the pH-Responsive Release of the Tuberculostatic Drug

Despite having good efficacy in the treatment and prevention of tuberculosis, the administration of rifampicin (RIF) can cause serious side effects, resulting from the prolonged use of this substance. Thus, it is necessary to seek new systems for administering tuberculostatic drugs, to avoid unwanted adverse effects, increase their bioavailability and, consequently, improve their therapeutic efficacy. The present work describes the achievement of a pH-responsive system for RIF, using palygorskite, a fibrous clay mineral, as a nanocarrier. To evaluate the influence of some operational variables on the drug adsorption process, a 2⁴ factorial experimental design was used. The experiment using a maximum concentration (0.125 mg/mL), lower mass of PAL (300 mg), and lower pH (pH 2) was more efficient compared to other experiments, resulting in a higher dose of the incorporated drug, equivalent to 33.62 mg/g. To elucidate the mechanism of interaction between the materials, the hybrid obtained was characterized by different characterization techniques (Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetry/derived thermogravimetry, zeta potential, scanning electron microscopy, and dispersive energy spectroscopy). In addition, kinetic models and adsorption isotherms were applied to the experimental data. Through in vitro release studies, it was possible to verify the effectiveness of the pH-dependent system obtained. The adjustment of experimental release data to the theoretical model of Higuchi indicated that the release of rifampicin occurs in a prolonged way from the palygorskite.

Effects of clay colloids on ciprofloxacin transport in saturated quartz sand porous media under different solution chemistry conditions

Antibiotics, a highly prevalent class of environmental organic pollutants, are becoming a matter of global concern. Clay minerals that are ubiquitous in subsurface environments may play an important role in the fate and transport of antibiotics. Taking ciprofloxacin (CIP) as a model antibiotic, this work explored the role of clay colloids (kaolinite and montmorillonite) on the adsorption and transport of CIP under different chemical solution conditions. The adsorption isotherms showed that montmorillonite colloids had a larger CIP sorption capacity than kaolinite colloids. The results of transport experiments indicated that montmorillonite colloids could promote CIP transport in saturated sand columns, but the addition of kaolinite colloids affected CIP mobility to a much smaller extent. The much stronger transport-enhancement effect of montmorillonite colloids was due to CIP adsorbed strongly to the colloids and desorption hysteresis of colloid-adsorbed CIP, likely stemming from the intercalation of this antibiotic in the interlayer of montmorillonite. Interestingly, transport of clay colloids increased with the increasing pH from 5.0 to 9.0; however, CIP transport decreased with the increasing pH in the presence of clay colloids. The observations were likely attributable to pH-dependent ciprofloxacin adsorption/desorption to clay minerals. Increasing the concentrations of NaCl and CaCl₂ generally decreased the contaminant-mobilizing ability of montmorillonite colloids, mainly by increasing the aggregation of colloids and thus, decreasing the transport of colloid-adsorbed CIP. Moreover, under the test conditions (1 mM NaCl and pH 7.0), the presence of CIP inhibited the transport of clay colloids due to the increase in aggregate size of clay colloids with the addition of CIP. Overall, these findings suggest that clay colloids with high adsorption abilities for antibiotics in the subsurface environment may act as a carrier for certain antibiotic compounds.

Sorption process of municipal solid waste biochar-montmorillonite composite for ciprofloxacin removal in aqueous media

This study evaluates a novel adsorbent for ciprofloxacin (CPX) removal from water using a composite derived from municipal solid waste biochar (MSW-BC) and montmorillonite (MMT). The composite adsorbent and pristine materials were characterized using powder X-Ray Diffraction (PXRD), Fourier-Transform Infrared (FTIR) spectroscopy, and Scanning Electron Microscope (SEM) before and after the adsorption. Batch experiments were conducted to study the mechanisms involved in the adsorption process. Ciprofloxacin sorption mechanisms were interpreted in terms of its pH-dependency and the distribution coefficients. The SEM images confirmed the successful binding of MMT onto the MSW-BC through flaky structure along with a porous morphology. Encapsulation of MMT onto MSW-BC was exhibited through changes in the basal spacing of MMT via PXRD analysis. Results from FTIR spectra indicated the presence of functional groups for both pristine materials and the composite that were involved in the adsorption reaction. The Hill isotherm model and pseudo-second-order and Elovich kinetic models fitted the batch sorption data, which explained the surface heterogeneity of the composite and cooperative adsorption mechanisms. Changes made to the MSW-BC through the introduction of MMT, enhanced the active sites on the composite adsorbent, thereby improving its interaction with ionizable CPX molecules giving high sorption efficiency.

Antibacterial properties and release kinetics of chlorhexidine diacetate from montmorillonite and palygorskite clays

Organoclays were prepared by means of cation-exchange reactions using different concentrations of chlorhexidine diacetate and two different types of clays: montmorillonite and palygorskite. The antibacterial activity against Escherichia coli was evaluated by means of disk diffusion tests as well as through bacterial growth inhibition (monitored by optical density measurements) in Luria broth media. Results indicate that modified palygorskites showed a greater antibacterial activity than those exhibited by modified montmorillonite, as latter only displayed antibacterial properties at the highest chlorhexidine diacetate loading. Modeling of chlorhexidine release was also performed and the models best described the drug release phenomena depended on the type of clay; being the Higuchi model and Korsemeyer–Peppas model for montmorillonite, whereas the zero-order model and Korsemeyer–Peppas model for palygorskite.

Clay-biochar composites for sorptive removal of tetracycline antibiotic in aqueous media

The focus of this research was to synthesize novel clay-biochar composites by incorporating montmorillonite (MMT) and red earth (RE) clay materials in a municipal solid waste (MSW) biochar for the adsorptive removal of tetracycline (TC) from aqueous media. X-ray Fluorescence Analysis (XRF), Fourier Transform Infrared Spectroscopy (FTIR), Powder X-ray Diffraction (PXRD) and Scanning Electron Microscopy (SEM) were used for the characterization of the synthesized raw biochar (MSW-BC) and clay-biochar composites (MSW-MMT and MSW-RE). Results showed that minute clay particles were dispersed on biochar surfaces. The FTIR bands due to Si-O functional group vibrations in the spectra of the clay-biochar composites provided further evidence for successful composite formation. The kinetic TC adsorption data of MSW-MMT were well fitted to the Elovich model expressing high surface activity of biochar and involvement of multiple mechanisms in the adsorption. The kinetic TC adsorption data of MSW-BC and MSW-RE were fitted to the pseudo second order model indicating dominant contribution of chemisorption mechanism during the adsorption. The adsorption differentiation obtained in the kinetic studies was mainly due to the structure of the combined clay material. The adsorption isotherm data of all the adsorbents were well fitted to the Freundlich model suggesting that the adsorption of TC onto the materials occurred via both physisorption and chemisorption mechanisms. In comparison to the raw biochar and MSW-RE, MSW-MMT exhibited higher TC adsorption capacity. Therefore, MSW-MMT clay-biochar composite could be applied in the remediation of TC antibiotic residues in contaminated aqueous media.

Municipal solid waste biochar-bentonite composite for the removal of antibiotic ciprofloxacin from aqueous media

This study investigates the adsorption of ciprofloxacin (CPX) onto a municipal solid waste derived biochar (MSW-BC) and a composite material developed by combining the biochar with bentonite clay. A bentonite-MSW slurry was first prepared at 1:5 ratio (w/w), and then pyrolyzed at 450 °C for 30 min. The composite was characterized by scanning electron microscopy (SEM), Powder X-ray diffraction (PXRD) and Fourier transform infrared (FTIR) spectroscopy before and after CPX adsorption. Batch experiments were conducted to assess the effect of pH, reaction time and adsorbate dosage. The SEM images confirmed successful modification of the biochar with bentonite showing plate like structures. The PXRD patterns showed changes in the crystalline lattice of both MSW-BC and the composite before and after CPX adsorption whereas the FTIR spectra indicated merging and widening of specific bands after CPX adsorption. The optimum CPX adsorption was achieved at pH 6, and the maximum adsorption capacity of the composite calculated via isotherm modeling was 190 mg/g, which was about 40% higher than the pristine MSW-BC. The Hill isotherm model along with pseudo-second order and Elovich kinetic models showed the best fit to the adsorption data. The most plausible mechanism for increased adsorption capacity is the increased active sites of the composites for CPX adsorption through induced electrostatic interactions between the functional groups of the composite and CPX molecules. The added reactive surfaces in the composite because of bentonite incorporation, and the intercalation of CPX in the clay interlayers improved the adsorption of CPX by the biochar-bentonite composite compared to the pristine biochar. Thus, MSW-BC-bentonite composites could be considered as a potential material for remediating pharmaceuticals in aqueous media.

Amitriptyline removal using palygorskite clay

With the increased detections of commonly used pharmaceuticals in surface water and wastewater, extensive attentions were paid recently to the fate and transport of these pharmaceuticals in the environment. Amitriptyline (AMI) is a tricyclic antidepressant widely applied to treat patients with anxiety and depression. In this study, the removal of AMI with palygorskite clay (PFl-1) was investigated under different physico-chemical conditions and supplemented by instrumental analyses. The uptake of AMI on PFl-1 was well fitted by the Langmuir isotherm with an adsorption capacity of 0.168 mmol g(-1) at pH 6-7. The AMI uptake was fast and reached equilibrium in 15 min. The X-ray diffraction patterns showed no shift of the (110) peak position of palygorskite after AMI uptake. However, the (001) peak position of the minor component smectite (about 10%) shifted to lower angle as the amounts of AMI input increased. These results suggested surface uptake of AMI on palygorskite and interlayer uptake of AMI in smectite. As smectite is a common component of palygorskite clays, its role in assessing the properties and performances of palygorskite clays for the uptake and removal of contaminants should not be neglected. Overall, the high affinity of AMI for PFl-1 and strong retention of AMI on PFl-1 suggested that it could be a good adsorbent to remove AMI from wastewater. Palygorskite clays can also be a sink for many cationic pharmaceuticals in the environmental of the arid regions.