Chemical speciation of sulfur and metals in biogas reactors - Implications for cobalt and nickel bio-uptake processes

Model based analysis of trace metal dosing strategies to improve methane yield in anaerobic digestion systems

Favourable effects of trace metals (TMs) on regulating anaerobic digestion (AD) performance are extensively utilised to improve methane yield. This study discusses a model-based approach to find out the best TM dosing strategies. The model has been applied to compare continuous, preloading, pulse dosing and in-situ loading. Simulations were also carried out to comprehend appropriate dosing form, dosing time and quantity of metals to be dosed. Model results show that the best way to dose TMs is repeated pulse dosing at low concentration levels in the optimum range with high frequency. Best dosing strategy for the system in this study was found to be 5 µM pulse loading at 5 days intervals as it gave maximum methane production and low effluent metal loss. Preferable dosing form depends on reactor configuration and this has been verified after model calibration with experimental data. Easily dissociable metal chlorides are ideal for continuous reactors.

Characterization of trace metal impact on organic acid metabolism and functional microbial community in treating dairy processing wastewater with thermophilic anaerobic membrane bioreactor

The anaerobic digestion (AD) of dairy processing wastewater (DPW) to produce bioenergy is considered promising but also associated with the possibility of an unbalanced organic matter and trace metal (TM) content. In this study, the TM content and its impact on AD were determined in an anaerobic membrane bioreactor operated to treat DPW. The results indicated that a deficiency in TMs resulted in the slow deterioration of the process, reducing biogas production, disrupting the buffer system, and the massive accumulation of organic acid. The deficiency of Co/Ni was significant, while iron fluctuated due to microbial and chemical effects. Syntrophic propionate oxidizing bacteria and methanogen were the main groups suppressed under the TM deficient environment, resulting in AD failure. No inhibitory effect on the lactic acid metabolism was observed. Hence, supplying theoretical TM dosage to DPW was necessary to realize the efficient and stable AD process and robust microbial community.

Influence of cysteine, serine, sulfate, and sulfide on anaerobic conversion of unsaturated long-chain fatty acid, oleate, to methane

This study aims to elucidate the role of sulfide and its precursors in anaerobic digestion (i.e., cysteine, representing sulfur-containing amino acids, and sulfate) on microbial oleate conversion to methane. Serine, with a similar structure to cysteine but with a hydroxyl group instead of a thiol, was included as a control to assess potential effects on methane formation that were not related to sulfur functionalities. The results showed that copresence of sulfide and oleate in anaerobic batch assays accelerated the methane formation compared to assays with only oleate and mitigated negative effect on methane formation caused by increased sulfide level. Nuclear magnetic resonance spectroscopy of sulfide-exposed oleate suggested that sulfide reaction with oleate double bonds likely contributed to negation of the negative effect on the methanogenic activity. Methane formation from oleate was also accelerated in the presence of cysteine or serine, while sulfate decreased the cumulative methane formation from oleate. Neither cysteine nor serine was converted to methane, and their accelerating effects was associated to different mechanisms due to establishment of microbial communities with different structures, as evidenced by high-throughput sequencing of 16S rRNA gene. These outcomes contribute with new knowledge to develop strategies for optimum use of sulfur- and lipid-rich wastes in anaerobic digestion processes.

Enhanced Anaerobic Biogas Production From Wheat Straw by Herbal-Extraction Process Residues Supplementation

Trace metals are essential constituents of cofactors and enzymes and that their addition to anaerobic digesters increases methane production. Many trace elements are contained in herbal-extraction process residues (HPR). The present study concerns the effect of six kinds of HPR [Danshen root (Dr), Astragalus membranaceus (Am), Isatis root (Ir), Angelica sinensis (As), and Pseudo-ginseng (Pg)] that were used as additives, respectively, in the anaerobic digestion of wheat straw on biogas and methane production. The ratios of HPR residues/wheat straw [based on total solids (TS), of wheat straw] were 3, 5, and 10%, respectively. The digesters were at 37 ± 1°C of water bath during 30 days of anaerobic digestion. The results showed that HPR had significant effects on the anaerobic co-digestion. The highest biogas productivity was achieved when treated with 10% Pseudo-ginseng residues (PGR), which yielded 337 ml/g TS of biogas and 178 ml/g TS of methane. Cumulative production of biogas and methane increased by 28 and 37% compared to the production achieved in the control. These results suggest that PGR is an effective HPR to enhance the production of methane.

A general framework to model the fate of trace elements in anaerobic digestion environments

Due to the multiplicity of biogeochemical processes taking place in anaerobic digestion (AD) systems and limitations of the available analytical techniques, assessing the bioavailability of trace elements (TEs) is challenging. Determination of TE speciation can be facilitated by developing a mathematical model able to consider the physicochemical processes affecting TEs dynamics. A modeling framework based on anaerobic digestion model no 1 (ADM1) has been proposed to predict the biogeochemical fate TEs in AD environments. In particular, the model considers the TE adsorption–desorption reactions with biomass, inerts and mineral precipitates, as well as TE precipitation/dissolution, complexation reactions and biodegradation processes. The developed model was integrated numerically, and numerical simulations have been run to investigate the model behavior. The simulation scenarios predicted the effect of (i) organic matter concentration, (ii) initial TEs concentrations, (iii) initial Ca–Mg concentrations, (iv) initial EDTA concentration, and (v) change in TE binding site density, on cumulative methane production and TE speciation. Finally, experimental data from a real case continuous AD system have been compared to the model predictions. The results prove that this modelling framework can be applied to various AD operations and may also serve as a basis to develop a model-predictive TE dosing strategy.

Impact of metallic nanoparticles on anaerobic digestion: A systematic review

Anaerobic digestion (AD) is one of the most energy-efficient waste treatment technologies for biodegradable wastes. Owing to the increasing trend of metallic nanoparticle applications in industry, they are ubiquitous to the waste streams, which may lead to remarkable impacts on the performance of the AD process. This review addresses the knowledge gaps and summarises the findings from the academic articles published from 2010 to 2019 focusing on the influences on both AD processes of biochemical hydrogen-generation and methane-production from selected metallic nano-materials. Both qualitative and quantitative analyses were conducted with selected indicators to evaluate the metallic nanoparticles' influences on the AD process. The selected metallic nanoparticles were grouped in the view of their chemical formulations aiming to point out the possible mechanisms behind their effects on AD processes. In summary, most metallic nanoparticles with trace-element-base (e.g. iron, cobalt, nickel) have positive effects on both AD hydrogen-generation and methane-production processes in terms of gas production, effluent quality, as well as process optimisation. Within an optimum concentration, they serve as key nutrients providers, aid key enzymes and co-enzymes synthesis, and thus stimulate anaerobic microorganism activities. As for the nano-additives without trace-element base, their positive influences are relied on providing active sites for the microorganism, as well as absorbing inhibitory factors. Moreover, comparisons of these nano-additives' impacts on the two gas-production phases were conducted, while methane-production phases are found to be more sensitive to additions of these nanoparticles then hydrogen-production phase. Research perspectives and research gaps in this area are discussed.

Comparative study on adsorption and immobilization of Cd(II) by rape component biomass

Agricultural wastes have promising potential for the production of low-cost and sustainable adsorbents for heavy metals, while the characteristics of those biosorbents and the stability of the passivated heavy metals under natural conditions need to be studied further. In this paper, the oilseed rape plant after seed harvesting was divided into three parts: root (RT), stem (ST), and pod (PD). The isotherm adsorption of cadmium (Cd(II)) on the biomass was conducted. In practice, the biomass was aged in the Cd(II)-contaminated soil, and the concentration of Cd(II) in the leachate was measured after the continuous eluent of typical acid rain. The components and elements of the biomass were determined for the analysis of the differences between the immobilization abilities of the biomass. Results showed the CC (corn cob, as a comparison), ST, RT, and PD had the adsorption capacities of 6.34, 7.58, 9.22, and 9.87 mg/g for Cd(II) through the Langmuir fitting of the isothermal adsorption experiments, respectively. The leached Cd(II) were reduced 1063, 2073, 2824, and 3621 μg by CC, ST, RT, and PD biomass aging, respectively. Compared that by CC, the immobilization differences between the biomass in soil were much greater than that in isotherm adsorption, indicating the biosorption ability of rape biomass was enlarged during the 30 days of aging. Nitrogen, phosphorus, and sulfur contents showed sequences as pod>root>stem and had high correlations with the reduced amount of leached Cd(II), which indicated protein might be beneficial for the enhancement of adsorption/immobilization in the soil.

Essential regulators of iron chemical speciation distributions in anaerobic digestion of pretreated food waste: Organic volatile fatty acids or inorganic acid radicals?

In this work, a 30-days batched mesophilic assay on pretreated food waste (PFW) under different inoculum/substrate (I/S) ratios (1:5, 1:2, 1:1, 2:1, 4:1 and 1:0) was carried out, to target the most important parameters in AD matrix on regulating iron (Fe) chemical speciation. Correlation coefficients were calculated within four Fe chemical forms and AD parameters of pH, volatile fatty acids (VFAs), inorganic acid radicals (IARs), and alkalinity. Results showed that IARs were not key factors on regulating Fe speciation. Without acidification, IARs showed weak correlations (coefficients < 0.40) with Fe chemical dynamics while other parameters showed stronger correlations (coefficients ≥ 0.60). Under acidification, VFAs initiated the conversion of exchangeable Fe into water soluble fraction. Residual fraction might play important role in regulating Fe shifting to more bioavailable states.

Comparative study of the adsorption/immobilization of Cu by turmeric residues after microbial and chemical extraction

The turmeric industry produces a huge amount of residues annually. After undergoing different extraction process, turmeric residue biomass may be transformed from waste to resource. Turmeric residues exhibit different characteristics suitable for various environmental applications. In this work, the adsorption of Cu(II) onto turmeric residues from microbial (TR-A) and chemical (TR-B) extraction was investigated. The characteristics of the residues were examined via Brunauer-Emmett-Teller analysis, thermogravimetric analysis, scanning electron microscopy, Fourier-transform infrared spectroscopy, and elemental analysis. Then, applications to Cu(II) immobilization were identified. Results suggested that although TR-B had better thermal stability, larger surface area, and more pores than TR-A, the adsorption capacity of Cu(II) onto TR-A was higher (13.12 mg/g) than that onto TR-B (7.37 mg/g) because TR-A had more microbial cell debris, metabolites, and S element than TR-B. In practice, TR-A-added soil achieved 40% more Cu immobilization than TR-B-added soil under continuous leaching of simulated acid rain. Consequently, the residues extracted using the microbial method prevented pollution after the traditional extraction process and transformed waste into a material for environmental remediation.

ADM1-based mechanistic model for the role of trace elements in anaerobic digestion processes

An original mechanistic model able to describe the fate of trace elements (TE) in anaerobic digestion systems has been synthetized from mass balance equations. The model takes into account the main biochemical and physico-chemical processes affecting TE bioavailability and it is aimed at evaluating the effect that the combination of such processes exerts on the system performance. Five main modules have been introduced: biochemistry, physico-chemistry, sorption, complexation and precipitation. The model is based on mass conservation principles and is formulated as a set of ordinary differential equations for the soluble and particulate components constituting the system. Model applications of two illustrative cases are provided. The first case is based on experimental results and examines the effect of TE depletion in an AD process of food waste (FW). The second case shows the effects of different metal supplements on methane production and biogas composition. The simulation results confirm that the model can fairly be used to predict the effect of TE dynamics and bioavailability, by considering biological, chemical and physicochemical processes in AD environments.

The chemical and dynamic distribution characteristics of iron, cobalt and nickel in three different anaerobic digestates: Effect of pH and trace elements dosage

The enhancement of the bioavailability and process controllability of trace elements (TEs) addition is of significance to improve the anaerobic digestion (AD) performance. In order to understand the bioavailability of TEs, the chemical form distribution patterns of endogenous/exogenous Fe, Ni and Co with different dosage (Fe: 1, 10 and 100 mg/kg; Ni and Co: 0.1, 1 and 10 mg/kg) and different pH condition (6.5; 7.5 and 8.5) were investigated in three different anaerobic digestates. The results showed that the exogenous TEs dosage exerted no obvious effects on the TEs distribution patterns. The chemical fractionation of TEs was more affected by pH, redox potential, AD process and digestate resource. Under pH 6.5 and with redox potential rising, the acid-extractable and reducible fractions and of Fe, Ni and Co were increased while the oxidizable fractions were decreased, which enhanced the bioavailability of TEs.

ADM1 based mathematical model of trace element precipitation/dissolution in anaerobic digestion processes

Due to the complex biogeochemistry of trace elements (TEs, e.g. Fe, Ni and Co) in anaerobic digestion processes, their role and fate is poorly understood. Challenging, time consuming and low detection limits of analytical procedures necessitate recruitment of mathematical models. A dynamic mathematical model based on anaerobic digestion model no.1 (ADM1) has been proposed to simulate the effect of TEs. New chemical equilibrium association/dissociation and precipitation/dissolution reactions have been implemented to determine TE bioavailability and their effect on anaerobic digestion. The model considers interactions with inorganic carbonate (HCO₃^- and CO₃^2-), phosphate (PO₄^3-, HPO₄^2-, H₂PO₄^-) and sulfide (HS^- and S^2-). The effect of deficiency, activation, inhibition and toxicity of TEs on the biochemical processes has been modelled based on a dose-response type inhibition function. The new model can predict: the dynamics of TEs (among carbonate, sulfide and phosphate); the starvation of TEs; and the effect of initial sulfur-phosphorus ratio in an in-silico batch anaerobic system.

Process analysis of anaerobic fermentation of Phragmites australis straw and cow dung exposing to elevated chromium (VI) concentrations

Anaerobic fermentation is considered as a cost-effective way of biomass waste disposal. Chromium (Cr) is one of the heavy metals that often been blamed for unsatisfactory operation or failure of anaerobic fermentation. The impact of Cr (added as K₂Cr₂O₇) on mesophilic anaerobic fermentation of Phragmites australis straw and cow dung was demonstrated by investigating the biogas properties, process stability, substrate degradation and enzyme activities during the fermentation process. The results showed that 30, 100 and 500 mg/L Cr⁶⁺ addition increased the cumulative biogas yields by up to 19.00%, 14.85% and 7.68% respectively, and brought forward the daily biogas yield peak. Meanwhile, the methane (CH₄) content in the 30 (52.47%) and 100 (40.57%) mg/L Cr⁶⁺-added groups were generally higher than the control group (37.70%). Higher pH values (close to pH 7) and lower oxidation-reduction potential (ORP) values in the Cr⁶⁺-added groups after the 15th day indicated the better process stability compared to the control group. Taking the whole fermentation process into account, the promoting effect of Cr⁶⁺ addition on biogas yields was mainly attributable to better process stability, the enhanced degradation of lignin and hemicellulose, the transformation of intermediates into VFA, the higher coenzyme F₄₂₀ activities and the efficient generation of CH₄. These results demonstrate that an appropriate addition of Cr⁶⁺ could enhance the anaerobic fermentation which support the regulations utilizing of the Cr⁶⁺ contaminated biowaste.

Impact of trace element supplementation on mesophilic anaerobic digestion of food waste using Fe-rich inoculum

Trace elements (TEs) play an indispensable role in enhancing the stability of anaerobic digestion (AD) of food waste (FW). Significant research on AD of FW with TE supplementation has been conducted with low Fe content inoculum. However, the use of Fe-rich inoculum is inevitable due to chemical phosphorous removal from wastewater in North America. We conducted comprehensive mesophilic batch tests to investigate the effect of TEs (Fe, Ni, Co, Se, and Mo) on FW digestion inoculated with Fe-rich sludge (≥ 1000 mg Fe L^-1). This paper presents the impact of supplementing various concentrations of TEs on specific methanogenic activity (SMA), maximum specific methane production rate (SMPR_max), and apparent hydrolysis rate constant (K_h). The addition of TEs adversely impacted methanogenic activity by 20 to 58% in the SMA tests. The effects of individual and mixed supplementation of TEs on the SMPR_max and K_h during FW digestion were negligible; exceptions include Fe, Mo, and Co. Final soluble TE concentrations were 10-29% of the initial soluble TEs. The high Fe concentration in the inoculum reduces the bioavailable fraction of added TEs via coprecipitation. Contrary with many literature reports indicating the need to supplement TE to improve FW digestion efficiency, with Fe-rich sludges, FW digestion does not require TE supplementation.