Extracellular production of tellurium nanoparticles by the photosynthetic bacterium Rhodobacter capsulatus

Biosynthesis of Novel Tellurium Nanorods by Gayadomonas sp. TNPM15 Isolated from Mangrove Sediments and Assessment of Their Impact on Spore Germination and Ultrastructure of Phytopathogenic Fungi

The biosynthesis of nanoparticles using green technology is emerging as a cost-efficient, eco-friendly and risk-free strategy in nanotechnology. Recently, tellurium nanoparticles (TeNPs) have attracted growing attention due to their unique properties in biomedicine, electronics, and other industrial applications. The current investigation addresses the green synthesis of TeNPs using a newly isolated mangrove-associated bacterium, Gayadomonas sp. TNPM15, and their impact on the phytopathogenic fungi Fusarium oxysporum and Alternaria alternata. The biogenic TeNPs were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Raman spectroscopy and Fourier transform infrared (FTIR). The results of TEM revealed the intracellular biosynthesis of rod-shaped nanostructures with a diameter range from 15 to 23 nm and different lengths reaching up to 243 nm. Furthermore, the successful formation of tellurium nanorods was verified by SEM-EDX, and the XRD pattern revealed their crystallinity. In addition, the FTIR spectrum provided evidence for the presence of proteinaceous capping agents. The bioinspired TeNPs exhibited obvious inhibitory effect on the spores of both investigated phytopathogens accomplished with prominent ultrastructure alternations, as evidenced by TEM observations. The biogenic TeNPs impeded spore germination of F. oxysporum and A. alternata completely at 48.1 and 27.6 µg/mL, respectively. Furthermore, an increase in DNA and protein leakage was observed upon exposure of fungal spores to the biogenic TeNPs, indicating the disruption of membrane permeability and integrity. Besides their potent influence on fungal spores, the biogenic TeNPs demonstrated remarkable inhibitory effects on the production of various plant cell wall-degrading enzymes. Moreover, the cytotoxicity investigations revealed the biocompatibility of the as-prepared biogenic TeNPs and their low toxicity against the human skin fibroblast (HSF) cell line. The biogenic TeNPs showed no significant cytotoxic effect towards HSF cells at concentrations up to 80 μg/mL, with a half-maximal inhibitory concentration (IC50) value of 125 μg/mL. The present work spotlights the antifungal potential of the biogenic TeNPs produced by marine bacterium against phytopathogenic fungi as a promising candidate to combat fungal infections.

Enhancing tellurite and selenite bioconversions by overexpressing a methyltransferase from Aromatoleum sp. CIB

Pollution by metalloids, e.g., tellurite and selenite, is of serious environmental concern and, therefore, there is an increasing interest in searching for ecologically friendly solutions for their elimination. Some microorganisms are able to reduce toxic tellurite/selenite into less toxic elemental tellurium (Te) and selenium (Se). Here, we describe the use of the environmentally relevant β-proteobacterium Aromatoleum sp. CIB as a platform for tellurite elimination. Aromatoleum sp. CIB was shown to tolerate 0.2 and 0.5 mM tellurite at aerobic and anaerobic conditions, respectively. Furthermore, the CIB strain was able to reduce tellurite into elemental Te producing rod-shaped Te nanoparticles (TeNPs) of around 200 nm length. A search in the genome of Aromatoleum sp. CIB revealed the presence of a gene, AzCIB_0135, which encodes a new methyltransferase that methylates tellurite and also selenite. AzCIB_0135 orthologs are widely distributed in bacterial genomes. The overexpression of the AzCIB_0135 gene both in Escherichia coli and Aromatoleum sp. CIB speeds up tellurite and selenite removal, and it enhances the production of rod-shaped TeNPs and spherical Se nanoparticles (SeNPs), respectively. Thus, the overexpression of a methylase becomes a new genetic strategy to optimize bacterial catalysts for tellurite/selenite bioremediation and for the programmed biosynthesis of metallic nanoparticles of biotechnological interest.

Green synthesis of biogenetic Te(0) nanoparticles by high tellurite tolerance fungus Mortierella sp. AB1 with antibacterial activity

Tellurite [Te(IV)] is a high-toxicity metalloid. In this study, a fungus with high Te(IV) resistance was isolated. Strain AB1 could efficiently reduce highly toxic Te(IV) to less toxic Te(0). The reduced products formed rod-shaped biogenetic Te(0) nanoparticles (Bio-TeNPs) intracellularly. Further TEM-element mapping, FTIR, and XPS analysis showed that the extracted Bio-TeNPs ranged from 100 to 500 nm and consisted of Te(0), proteins, lipids, aromatic compounds, and carbohydrates. Moreover, Bio-TeNPs exhibited excellent antibacterial ability against Shigella dysenteriae, Escherichia coli, Enterobacter sakazakii, and Salmonella typhimurium according to inhibition zone tests. Further growth and live/dead staining experiments showed that E. coli and S. typhimurium were significantly inhibited by Bio-TeNPs, and cells were broken or shriveled after treatment with Bio-TeNPs based on SEM observation. Additionally, the antioxidant and cytotoxicity tests showed that the Bio-TeNPs exhibited excellent antioxidant capacity with no cytotoxicity. All these results suggested that strain AB1 showed great potential in bioremediation and Bio-TeNPs were excellent antibacterial nanomaterials with no cytotoxicity.

Tellurite and Selenite: how can these two oxyanions be chemically different yet so similar in the way they are transformed to their metal forms by bacteria?

This opinion review explores the microbiology of tellurite, TeO₃²⁻ and selenite, SeO₃²⁻ oxyanions, two similar Group 16 chalcogen elements, but with slightly different physicochemical properties that lead to intriguing biological differences. Selenium, Se, is a required trace element compared to tellurium, Te, which is not. Here, the challenges around understanding the uptake transport mechanisms of these anions, as reflected in the model organisms used by different groups, are described. This leads to a discussion around how these oxyanions are subsequently reduced to nanomaterials, which mechanistically, has controversies between ideas around the molecule chemistry, chemical reactions involving reduced glutathione and reactive oxygen species (ROS) production along with the bioenergetics at the membrane versus the cytoplasm. Of particular interest is the linkage of glutathione and thioredoxin chemistry from the cytoplasm through the membrane electron transport chain (ETC) system/quinones to the periplasm. Throughout the opinion review we identify open and unanswered questions about the microbial physiology under selenite and tellurite exposure. Thus, demonstrating how far we have come, yet the exciting research directions that are still possible. The review is written in a conversational manner from three long-term researchers in the field, through which to play homage to the late Professor Claudio Vásquez.

Te-Cefotaxime Nanocomposites with Restored Antibiotic Susceptibility and LED Light Activated Photothermal Effect for Rapid MRSA Eradication

The ever-growing antibiotic-resistant bacteria pose a huge threat to public health. Restoring the susceptibility of ineffective antibiotics by inorganic nanomaterials and combining of photothermal and antibiotic synergistic therapy could be...

Biological Nanofactories: Using Living Forms for Metal Nanoparticle Synthesis

Metal nanoparticles are nanosized entities with dimensions of 1-100 nm that are increasingly in demand due to applications in diverse fields like electronics, sensing, environmental remediation, oil recovery and drug delivery. Metal nanoparticles possess large surface energy and properties different from bulk materials due to their small size, large surface area with free dangling bonds and higher reactivity. High cost and pernicious effects associated with the chemical and physical methods of nanoparticle synthesis are gradually paving the way for biological methods due to their eco-friendly nature. Considering the vast potentiality of microbes and plants as sources, biological synthesis can serve as a green technique for the synthesis of nanoparticles as an alternative to conventional methods. A number of reviews are available on green synthesis of nanoparticles but few have focused on covering the entire biological agents in this process. Therefore present paper describes the use of various living organisms like bacteria, fungi, algae, bryophytes and tracheophytes in the biological synthesis of metal nanoparticles, the mechanisms involved and the advantages associated therein.

Acceleration mechanism of bioavailable Fe(Ⅲ) on Te(IV) bioreduction of Shewanella oneidensis MR-1: Promotion of electron generation, electron transfer and energy level

The release of highly toxic tellurite into the aquatic environment poses significant environmental risks. The acceleration mechanism and tellurium nanorods (TeNPs) characteristics with bioavailable ferric citrate (Fe(III)) were investigated in the tellurite (Te(IV)) bioreduction. Experiments showed that 5 mM Fe(III) increased the Te(IV) bioreduction rate from 0 to 12.40 mg/(L·h). Cyclic voltammetry, electrochemical impedance spectroscopy and Tafel were used to investigate electron transfer during Te(IV) bioreduction. NADH production (electron production) was significantly enhanced to 138% by Fe(III). Meanwhile Fe(III) stimulated the increase of cytochrome c, resulting in increased electron transport system activity. In addition, Fe(III) facilitated the secretion of extracellular polymeric substances (EPS) and reduced cell membrane permeability, thus reducing the toxicity of Te(IV) to cells. The increase of ATP provided energy for the metabolic process of Te(IV) bioreduction, playing an active role in cell activity. Based on the above analysis, the acceleration mechanism of Fe(III) on Te(IV) bioreduction was proposed from the aspects of electron generation, electron transfer and energy level. Zeta potential and FT-IR spectra indicated that the stability of TeNPs contributed to the covered EPS. This study provides further understanding the acceleration mechanism of Te(IV) bioreduction and promising strategy for improving the stability of TeNPs.

Green Synthesis of Selenium and Tellurium Nanoparticles: Current Trends, Biological Properties and Biomedical Applications

The synthesis and assembly of nanoparticles using green technology has been an excellent option in nanotechnology because they are easy to implement, cost-efficient, eco-friendly, risk-free, and amenable to scaling up. They also do not require sophisticated equipment nor well-trained professionals. Bionanotechnology involves various biological systems as suitable nanofactories, including biomolecules, bacteria, fungi, yeasts, and plants. Biologically inspired nanomaterial fabrication approaches have shown great potential to interconnect microbial or plant extract biotechnology and nanotechnology. The present article extensively reviews the eco-friendly production of metalloid nanoparticles, namely made of selenium (SeNPs) and tellurium (TeNPs), using various microorganisms, such as bacteria and fungi, and plants' extracts. It also discusses the methodologies followed by materials scientists and highlights the impact of the experimental sets on the outcomes and shed light on the underlying mechanisms. Moreover, it features the unique properties displayed by these biogenic nanoparticles for a large range of emerging applications in medicine, agriculture, bioengineering, and bioremediation.

Plug-In Safe-by-Design Nanoinorganic Antibacterials

Due to antimicrobial resistance and the adverse health effects that follow broad and inappropriate use of antibacterial agents, new classes of antibacterials with broad and strong bactericidal activity and safety for human use are urgently required globally, increasingly so with the onset of climate change. However, R&D in this field is known to be rarely profitable, unless a cost-effective, flexible, and convenient platform that ensures the production of workable candidate antibacterials can be developed. To address this issue, inorganic nanomaterials have been considered for their bactericidal activities, yet further investigations of composition crystalline modifications and/or surface biomaterial coatings are still required to provide effective and safe antibacterial nanoparticles. In this study, we developed a plug-in system comprising a spark plasma reactor and a flow heater under nitrogen gas flow to supply precursor inorganic nanoparticles (Cu-Te configuration) that can be modulated in-flight at different temperatures. From antibacterial and toxicological assays in both in vitro and in vivo models, bactericidal and toxicological profiles showed that the plug-in system-based platform can be used to identify key parameters for producing safe-by-design agents with antibacterial activity [>88% (in vitro) and >80% (in vivo) in antibacterial efficiency] and safety (>65% in in vitro viability and >60% in in vivo survival rate).

Fungal formation of selenium and tellurium nanoparticles

The fungi Aureobasidium pullulans, Mortierella humilis, Trichoderma harzianum and Phoma glomerata were used to investigate the formation of selenium- and tellurium-containing nanoparticles during growth on selenium- and tellurium-containing media. Most organisms were able to grow on both selenium- and tellurium-containing media at concentrations of 1 mM resulting in extensive precipitation of elemental selenium and tellurium on fungal surfaces as observed by the red and black colour changes. Red or black deposits were confirmed as elemental selenium and tellurium, respectively. Selenium oxide and tellurium oxide were also found after growth of Trichoderma harzianum with 1 mM selenite and tellurite as well as the formation of elemental selenium and tellurium. The hyphal matrix provided nucleation sites for metalloid deposition with extracellular protein and extracellular polymeric substances localizing the resultant Se or Te nanoparticles. These findings are relevant to remedial treatments for selenium and tellurium and to novel approaches for selenium and tellurium biorecovery.

Morphology-tunable tellurium nanomaterials produced by the tellurite-reducing bacterium Lysinibacillus sp. ZYM-1

Although tellurite is highly toxic to organisms, elemental tellurium nanomaterials (TeNMs) have many uses. The microbe-mediated reduction of tellurite to Te(0) has been shown to be a green and cost-effective approach for turning waste into wealth. However, it is difficult to tune the morphology of biogenic nanomaterials. In this study, a series of experiments was conducted to investigate the factors influencing tellurite reduction by the tellurite-reducing bacterium Lysinibacillus sp. ZYM-1, including pH, tellurite concentration, temperature, and heavy metal ions. The optimal removal efficiency of tellurite was respectively achieved at pH 8, 0.5 mM tellurite, and 40 °C. All of the tested metal ions retarded the reduction of tellurite, especially Cd²⁺ and Co²⁺, which completely inhibited its reduction. Further characterization of the biogenic TeNMs indicated that their morphology could be tuned by the tellurite concentration, pH, temperature, and organic solvents used. Regular Te nanosheets were produced using 5 mM tellurite. The TeNMs were primarily synthesized in the cell membrane. Hexagonal Te nanoplates, nanorods, nanoflowers, and nanobranches were synthesized when combining membrane fractions with tellurite and NADH. The diverse morphologies are assumed to be induced by the synergy between the reduction kinetics and the protein structure. Therefore, this study confirmed that the bacterium can tune the morphology of TeNMs, broadening the potential application of biogenic TeNMs.

Moss habitats distinctly affect their associated bacterial community structures as revealed by the high-throughput sequencing method

To better understand the factors that influence the distribution of bacteria associated with mosses, the communities inhabiting in five moss species from two different habitats in Beijing Songshan National Nature Reserve were investigated using the high-throughput sequencing method. The sequencing was performed based on the bacterial 16S rRNA and 16S rDNA libraries. Results showed that there are abundant bacteria inhabiting in all the mosses sampled. The taxonomic analysis of these bacteria showed that they mainly consisted of those in the phyla Proteobacteria and Actinobacteria, and seldom were from phylum Armatimonadetes, Bacteroidetes and Firmicutes. The hierarchical cluster tree, based on the OTU level, divided the bacteria associated with all samples into two branches according to the habitat types of the host (terrestrial and aquatic). The PCoA diagram further divided the bacterial compositions into four groups according to both types of habitats and the data sources (DNA and RNA). There were larger differences in the bacterial community composition in the mosses collected from aquatic habitat than those of terrestrial one, whether at the DNA or RNA level. Thus, this survey supposed that the habitat where the host was growing was a relevant factor influencing bacterial community composition. In addition, the bacterial community detected at the RNA level was more sensitive to the habitat of the growing host, which could also be proved by the significantly differences in the predicted function by PICRUSt and the metabolically active dominant genera between different groups. This study expands the knowledge about the interactions between mosses and microbes.

Assembly, growth and conductive properties of tellurium nanorods produced by Rhodococcus aetherivorans BCP1

Tellurite (TeO₃^2-) is a hazardous and toxic oxyanion for living organisms. However, several microorganisms can bioconvert TeO₃^2- into the less toxic form of elemental tellurium (Te⁰). Here, Rhodococcus aetherivorans BCP1 resting (non-growing) cells showed the proficiency to produce tellurium-based nanoparticles (NPs) and nanorods (NRs) through the bioconversion of TeO₃^2-, depending on the oxyanion initial concentration and time of cellular incubation. Te-nanostructures initially appeared in the cytoplasm of BCP1 cells as spherical NPs, which, as the exposure time increased, were converted into NRs. This observation suggested the existence of an intracellular mechanism of TeNRs assembly and growth that resembled the chemical surfactant-assisted process for NRs synthesis. The TeNRs produced by the BCP1 strain showed an average length (>700 nm) almost doubled compared to those observed in other studies. Further, the biogenic TeNRs displayed a regular single-crystalline structure typically obtained for those chemically synthesized. The chemical-physical characterization of the biogenic TeNRs reflected their thermodynamic stability that is likely derived from amphiphilic biomolecules present in the organic layer surrounding the NRs. Finally, the biogenic TeNRs extract showed good electrical conductivity. Thus, these findings support the suitability of this strain as eco-friendly biocatalyst to produce high quality tellurium-based nanomaterials exploitable for technological purposes.

Expanding beyond canonical metabolism: Interfacing alternative elements, synthetic biology, and metabolic engineering

Metabolic engineering offers an exquisite capacity to produce new molecules in a renewable manner. However, most industrial applications have focused on only a small subset of elements from the periodic table, centered around carbon biochemistry. This review aims to illustrate the expanse of chemical elements that can currently (and potentially) be integrated into useful products using cellular systems. Specifically, we describe recent advances in expanding the cellular scope to include the halogens, selenium and the metalloids, and a variety of metal incorporations. These examples range from small molecules, heteroatom-linked uncommon elements, and natural products to biomining and nanotechnology applications. Collectively, this review covers the promise of an expanded range of elemental incorporations and the future impacts it may have on biotechnology.

Antimicrobial and Antioxidant Activity of the Biologically Synthesized Tellurium Nanorods; A Preliminary In vitro Study

Background: Recent theranostic (therapeutic or diagnostic) applications of tellurium nanoparticles have attracted a great interest for development of different methods for synthesis of this valuable nanostructure, especially via biological resources. Objectives: In the present study, the antimicrobial and antioxidant effects of the tellurium nanorods (Te NRs) biosynthesized by a bacterial strain Pseudomonas pseudoalcaligenes strain Te were evaluated. Materials and Methods: The antimicrobial effect of Te NRs and potassium tellurite against different bacterial and fungal pathogens was assessed by microdilution method. Furthermore, the disk diffusion method was used to evaluate the antibacterial effect of the biogenic Te NRs and potassium tellurite against methicillin-resistant Staphylococcus aureus, alone or in combination with various antibiotics. Also, the biogenic Te NRs were investigated for antioxidant activity using 2, 2-diphenyl- 1-picrylhydrazyl (DPPH) scavenging activity and reducing power assay. Results: Transmission electron micrograph (TEM) of the purified Te NRs showed individual and rod-shaped nanostructure (~22 nm diameter by 185 nm in length). Based on the data obtained from both microdilution and disk diffusion method the K₂ TeO₃ exhibited a higher antibacterial and antifungal activity compared to the Te NRs. The measured IC₅₀ for the biogenic Te NRs (i.e. DPPH radical scavenging activity) was found to be 24.9 μg.mL^-1, while, K ₂ TeO₃ has represented only 17.6 ± 0.8 % DPPH radical scavenging effect at the concentration of 160 μg.mL^-1. The reducing power assay revealed a higher electron-donating activity for Te NRs compared to K₂TeO₃. Conclusions: Based on the data obtained from both microdilution and disk diffusion method the K₂TeO₃ exhibited a higher antimicrobial and antifungal activity than Te NRs. Te NRs didn't show the antibacterial effect against the tested bacterial strain: MRSA and showed an inhibitory effect and antibacterial activity of the effective antibiotics. However, more studies should be performed to explore the action mechanism of the produced biogenic Te NRs.

Ochrobactrum sp. MPV1 from a dump of roasted pyrites can be exploited as bacterial catalyst for the biogenesis of selenium and tellurium nanoparticles

Background

Bacteria have developed different mechanisms for the transformation of metalloid oxyanions to non-toxic chemical forms. A number of bacterial isolates so far obtained in axenic culture has shown the ability to bioreduce selenite and tellurite to the elemental state in different conditions along with the formation of nanoparticles—both inside and outside the cells—characterized by a variety of morphological features. This reductive process can be considered of major importance for two reasons: firstly, toxic and soluble (i.e. bioavailable) compounds such as selenite and tellurite are converted to a less toxic chemical forms (i.e. zero valent state); secondly, chalcogen nanoparticles have attracted great interest due to their photoelectric and semiconducting properties. In addition, their exploitation as antimicrobial agents is currently becoming an area of intensive research in medical sciences.

Results

In the present study, the bacterial strain Ochrobactrum sp. MPV1, isolated from a dump of roasted arsenopyrites as residues of a formerly sulfuric acid production near Scarlino (Tuscany, Italy) was analyzed for its capability of efficaciously bioreducing the chalcogen oxyanions selenite (SeO₃²⁻) and tellurite (TeO₃²⁻) to their respective elemental forms (Se⁰ and Te⁰) in aerobic conditions, with generation of Se- and Te-nanoparticles (Se- and TeNPs). The isolate could bioconvert 2 mM SeO₃²⁻ and 0.5 mM TeO₃²⁻ to the corresponding Se⁰ and Te⁰ in 48 and 120 h, respectively. The intracellular accumulation of nanomaterials was demonstrated through electron microscopy. Moreover, several analyses were performed to shed light on the mechanisms involved in SeO₃²⁻ and TeO₃²⁻ bioreduction to their elemental states. Results obtained suggested that these oxyanions are bioconverted through two different mechanisms in Ochrobactrum sp. MPV1. Glutathione (GSH) seemed to play a key role in SeO₃²⁻ bioreduction, while TeO₃²⁻ bioconversion could be ascribed to the catalytic activity of intracellular NADH-dependent oxidoreductases. The organic coating surrounding biogenic Se- and TeNPs was also characterized through Fourier-transform infrared spectroscopy. This analysis revealed interesting differences among the NPs produced by Ochrobactrum sp. MPV1 and suggested a possible different role of phospholipids and proteins in both biosynthesis and stabilization of such chalcogen-NPs.

Conclusions

In conclusion, Ochrobactrum sp. MPV1 has demonstrated to be an ideal candidate for the bioconversion of toxic oxyanions such as selenite and tellurite to their respective elemental forms, producing intracellular Se- and TeNPs possibly exploitable in biomedical and industrial applications.

Bifunctional Tellurium Nanodots for Photo-Induced Synergistic Cancer Therapy

Elemental tellurium (Te) nanoparticles are increasingly important in a variety of applications such as thermoelectricity, photoconductivity, and piezoelectricity. However, they have been explored with limited success in their biomedical use, and thus a tremendous challenge still exists in the exploration of Te nanoparticles that can treat tumors as an effective anticancer agent. Here, we introduce bifunctional Te nanodots with well-defined nanostructure as an effective anticancer agent for photo-induced synergistic cancer therapy with tumor ablation, which is accomplished using hollow albumin nanocages as a nanoreactor. Under near-infrared light irradiation, Te nanodots can produce effective photothermal conversion, as well as highly reactive oxygen species such as •O₂^- and dismutated •OH via a type-I mechanism through direct electron transfer, thereby triggering the potent in vivo hyperthermia and simultaneous intracellular reactive oxygen species at tumors. Moreover, Te nanodots possess perfect resistance to photobleaching, effective cytoplasmic translocation, preferable tumor accumulation, as well as in vivo renal elimination, promoting severe photo-induced cell damage and subsequent synergy between photothermal and photodynamic treatments for tumor ablation. These findings provide the insight of elemental Te nanodots for biomedical research.

Technological Microbiology: Development and Applications

Over thousands of years, modernization could be predicted for the use of microorganisms in the production of foods and beverages. However, the current accelerated pace of new food production is due to the rapid incorporation of biotechnological techniques that allow the rapid identification of new molecules and microorganisms or even the genetic improvement of known species. At no other time in history have microorganisms been so present in areas such as agriculture and medicine, except as recognized villains. Currently, however, beneficial microorganisms such as plant growth promoters and phytopathogen controllers are required by various agricultural crops, and many species are being used as biofactories of important pharmacological molecules. The use of biofactories does not end there: microorganisms have been explored for the synthesis of diverse chemicals, fuel molecules, and industrial polymers, and strains environmentally important due to their biodecomposing or biosorption capacity have gained interest in research laboratories and in industrial activities. We call this new microbiology Technological Microbiology, and we believe that complex techniques, such as heterologous expression and metabolic engineering, can be increasingly incorporated into this applied science, allowing the generation of new and improved products and services.

Continuous removal and recovery of tellurium in an upflow anaerobic granular sludge bed reactor

Continuous removal of tellurite (TeO₃^2-) from synthetic wastewater and subsequent recovery in the form of elemental tellurium was studied in an upflow anaerobic granular sludge bed (UASB) reactor operated at 30°C. The UASB reactor was inoculated with anaerobic granular sludge and fed with lactate as carbon source and electron donor at an organic loading rate of 0.6g CODL^-1d^-1. After establishing efficient and stable COD removal, the reactor was fed with 10mg TeO₃^2-L^-1 for 42 d before increasing the influent concentration to 20mg TeO₃^2-L^-1. Tellurite removal (98 and 92%, respectively, from 10 and 20mg TeL^-1) was primarily mediated through bioreduction and most of the removed Te was retained in the bioreactor. Characterization using XRD, Raman spectroscopy, SEM-EDX and TEM confirmed association of tellurium with the granular sludge, typically in the form of elemental Te(0) deposits. Furthermore, application of an extracellular polymeric substances (EPS) extraction method to the tellurite reducing sludge recovered up to 78% of the tellurium retained in the granular sludge. This study demonstrates for the first time the application of a UASB reactor for continuous tellurite removal from tellurite-containing wastewater coupled to elemental Te(0) recovery.

Rhodococcus aetherivorans BCP1 as cell factory for the production of intracellular tellurium nanorods under aerobic conditions

Background

Tellurite (TeO₃²⁻) is recognized as a toxic oxyanion to living organisms. However, mainly anaerobic or facultative-anaerobic microorganisms are able to tolerate and convert TeO₃²⁻ into the less toxic and available form of elemental Tellurium (Te⁰), producing Te-deposits or Te-nanostructures. The use of TeO₃²⁻-reducing bacteria can lead to the decontamination of polluted environments and the development of “green-synthesis” methods for the production of nanomaterials. In this study, the tolerance and the consumption of TeO₃²⁻ have been investigated, along with the production and characterization of Te-nanorods by Rhodococcus aetherivorans BCP1 grown under aerobic conditions.

Results

Aerobically grown BCP1 cells showed high tolerance towards TeO₃²⁻ with a minimal inhibitory concentration (MIC) of 2800 μg/mL (11.2 mM). TeO₃²⁻ consumption has been evaluated exposing the BCP1 strain to either 100 or 500 μg/mL of K₂TeO₃ (unconditioned growth) or after re-inoculation in fresh medium with new addition of K₂TeO₃ (conditioned growth). A complete consumption of TeO₃²⁻ at 100 μg/mL was observed under both growth conditions, although conditioned cells showed higher consumption rate. Unconditioned and conditioned BCP1 cells partially consumed TeO₃²⁻ at 500 μg/mL. However, a greater TeO₃²⁻ consumption was observed with conditioned cells. The production of intracellular, not aggregated and rod-shaped Te-nanostructures (TeNRs) was observed as a consequence of TeO₃²⁻ reduction. Extracted TeNRs appear to be embedded in an organic surrounding material, as suggested by the chemical–physical characterization. Moreover, we observed longer TeNRs depending on either the concentration of precursor (100 or 500 μg/mL of K₂TeO₃) or the growth conditions (unconditioned or conditioned grown cells).

Conclusions

Rhodococcus aetherivorans BCP1 is able to tolerate high concentrations of TeO₃²⁻ during its growth under aerobic conditions. Moreover, compared to unconditioned BCP1 cells, TeO₃²⁻conditioned cells showed a higher oxyanion consumption rate (for 100 μg/mL of K₂TeO₃) or to consume greater amount of TeO₃²⁻ (for 500 μg/mL of K₂TeO₃). TeO₃²⁻ consumption by BCP1 cells led to the production of intracellular and not aggregated TeNRs embedded in an organic surrounding material. The high resistance of BCP1 to TeO₃²⁻ along with its ability to produce Te-nanostructures supports the application of this microorganism as a possible eco-friendly nanofactory.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-016-0602-8) contains supplementary material, which is available to authorized users.