Synthesis and characterization of polyacrylic acid- grafted-carboxylic graphene/titanium nanotube composite for the effective removal of enrofloxacin from aqueous solutions: Adsorption and photocatalytic degradation studies

Mechanism insight into double S-scheme heterojunctions and atomic vacancies with tunable band structures for notably enhanced light-driven enrofloxacin decomposition

Building narrow band gap semiconductors and fast separation of photogenerated electron-hole (e--h+) structures are of great significance for photocatalytic process. In this contribution, the CeO2-x/C3-yN4/Ce(CO3)(OH) double S-scheme heterojunctions with atomic vacancies tunable band gap (2.54 eV) have been designed and fabricated as a boost photocatalyst for enrofloxacin (ENR) photodegradation. Compared with the control samples, the experimental results indicate that the typical sample (CeO2-x/C3-yN4/Ce(CO3)(OH)-2) achieves the highest ENR photodegradation efficiency (93.6 %) in 240 min under a pH of 6, and the possible photodegradation pathways are also proposed. The superior performance is ascribed to the CeO2-x/C3-yN4/Ce(CO3)(OH) double S-scheme heterojunctions for selective recombination of photogenerated electrons with weak-reduction ability in conduction band (CB) of CeO2-x, C3-yN4 and the photogenerated holes with weak-oxidation nature in valance band (VB) of C3-yN4, Ce(CO3)(OH), which increase the retention rate of photogenerated electrons in CB of Ce(CO3)(OH) and photogenerated holes in VB of CeO2-x to degrade ENR. This is the first systematic study of CeO2-x/C3-yN4/Ce(CO3)(OH) double S-scheme heterojunctions for ENR photodegradation.

Metal-free carbon-based anode for electrochemical degradation of tetracycline and metronidazole in wastewater

Degradation of antibiotics through electrocatalytic oxidation has recently been comprehended as a promising strategy in wastewater treatment. Herein, nitrogen and sulphur doped graphene oxide (N,S-rGO) nanosheets were synthesized and employed as metal-free anodic material for electrochemical degradation of antibiotics, viz. metronidazole (MNZ) and tetracycline (TC). The synthesized anodic material was characterized using various spectral techniques and further the electrochemical behaviour of N,S-rGO was thoroughly examined. Thereafter, the N,S-rGO material was then employed as the anode material towards the electrocatalytic degradation of antibiotics. Parameters such as initial concentration of the antibiotics and current densities were varied and their effect towards the degradation of MNZ and TC were probed. Notably, the N,S-rGO based anode has shown impressive removal efficiency of 99% and 98.5%, after 120 min of reaction time for MNZ and TC, respectively, under optimized conditions. The obtained results including the kinetic parameters, removal efficiency and electrical efficiency ensure that the prepared anodic material has huge prospective towards real-time application for removal of antibiotics from water.

Multi-function adsorbent-photocatalyst MXene-TiO2 composites for removal of enrofloxacin antibiotic from water

MXenes, a new family of two-dimensional transition metal carbides or nitrides, have attracted tremendous attention for various applications due to their unique properties such as good electrical conductivity, hydrophilicity, and ion intercalability. In this work, Ti₃C₂ MXene, or MX, is converted to MX-TiO₂ composites using a simple and rapid microwave hydrothermal treatment in HCl/NaCl mixture solution that induces formation of fine TiO₂ particles on the MX parent structure and imparts photocatalytic activity to the resulting MX-TiO₂ composites. The composites were used for enrofloxacin (ENR), a frequently found contaminating antibiotic, removal from water. The relative amount of the MX and TiO₂ can be controlled by controlling the hydrothermal temperature resulting in composites with tunable adsorption/photocatalytic properties. NaCl addition was found to play important role as composites synthesized without NaCl could not adsorb enrofloxacin well. Adding NaCl into the hydrothermal treatment causes sodium ions to be simultaneously intercalated into the composite structure, improving ENR adsorption greatly from 1 to 6 mg ENR/g composite. It also slows down the MX to TiO₂ conversion leading to a smaller and more uniform distribution of TiO₂ particles on the structure. MX-TiO₂/NaCl composites, which have sodium intercalated in their structures, showed both higher ENR adsorption and photocatalytic activity than composites without NaCl despite the latter having higher TiO₂ content. Adsorbed ENR on the composites can be efficiently degraded by free radicals generated from the photoexcited TiO₂ particles, leading to high photocatalytic degradation efficiency. This demonstrates the synergetic effect between adsorption and photocatalytic degradation of the synthesized compounds.

A core/shell TiO2 magnetized molecularly imprinted photocatalyst (MMIP@TiO2): synthesis and its photodegradation activity towards sulfasalazine

Although the selectivity of TiO₂ for the degradation of target molecules is not enough, it is a broadly employed photocatalyst for the degradation of many pollutants. Molecularly imprinted compounds owing to their extreme recognition specificity have become increasingly popular for preparing selective photocatalysts. In this work, based on molecularly imprinted magnetized TiO₂ (MMIP@TiO₂), a selective photocatalyst was prepared. Via the co-precipitation method, Fe₃O₄ particles were prepared and coated respectively by SiO₂, vinyl end groups, and molecularly imprinted polymers (MIP). The synthesized photocatalyst was characterized by the X-ray diffraction method (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive x-ray spectrometry (EDX), vibrating sample magnetometry (VSM), high-performance liquid chromatography (HPLC), and photoluminescence analysis (PL). The photocatalyst was then used to degrade the sulfasalazine pharmaceutical pollutant under UV irradiation. An average crystallite size of 9 nm was obtained for the MMIP@TiO₂ sample from the Scherrer formula and 34.5 nm by the Williamson-Hall formula. The results revealed that compared to the non-imprinted counterpart, the molecularly imprinted photocatalyst had significantly higher efficiency and selectivity for the degradation of target molecules. The process was forwarded with 90% efficiency within 10 min. Optimal conditions were 10.0 min irradiation when 25 mL SSZ solution (50 mg/L), 0.07 g/L catalyst dose, and pH 6.0 were applied. The maximum removal efficiency was calculated to be 92%. The external magnetic field quickly removed the photocatalyst from the solution and regenerated it. It was revealed that after each regeneration cycle, the efficiency dropped. Nevertheless, 63% of the preliminary effectiveness remained after four regeneration steps.

Fabrication of graphene oxide/inulin impregnated with ZnO nanoparticles for efficient removal of enrofloxacin from water: Taguchi-optimized experimental analysis

A novel nano-adsorbent zinc oxide impregnated graphene oxide/inulin (ZGI) was prepared for the investigation of the removal efficiency of enrofloxacin. Characterization of the nano-adsorbent was accomplished through Fourier transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with EDS, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The average crystallite size of nanomaterial (ZGI) calculated from XRD data was 14.82 nm. The adsorption of enrofloxacin onto ZGI was performed in batch mode. The variables of adsorption process such as adsorbent dose, pH, contact time and initial concentration of enrofloxacin were optimized by Taguchi method to achieve the maximum removal efficiency. The optimum values of variables were: adsorbent dose = 25 mg, pH = 7, contact time = 60 min and initial concentration = 50 mg/L. The maximum adsorption capacity and removal efficiency of the material for enrofloxacin were 317.83 mg/g and 98.60%, respectively at 303 K. Redlich-Peterson isotherm model was the best fitted among the various isotherm models based on highest R² values (0.9978-0.9981) and lowest χ² (3.43 ×10^-4-2.00×10^-3). Kinetic data followed pseudo-second order model (R² ≥ 0.9974) more accurately as compared to pseudo-first order model (R²≤0.9772). The adsorption mechanism was illustrated on the basis of XPS and Raman studies. Reusability investigation showed that the nano-adsorbent ZGI could be used up to 5 adsorption-desorption cycles with greater than 90% removal efficiency.

Sulfidised nanoscale zerovalent iron-modified pitaya peel-derived carbon for enrofloxacin degradation and swine wastewater treatment: Combination of electro-Fenton and bio-electro-Fenton process

In this study, a new Fenton system combining electro-Fenton and bio-electro-Fenton (EF-BEF) processes was proposed for ENR degradation and swine wastewater treatment, and pitaya peel-derived carbon modified with sulfidised nanoscale zerovalent iron (SnZVI) was developed as a catalyst for the system. The as-prepared PPC-800 carbon displayed a hierarchical porous structure (693.5 m²/g), abundant oxygen-containing groups, and carbon defects, which endowed it with a good adsorption capacity, high H₂O₂ generation capacity (151.9 ± 10.5 mg/L) during the EF period, and good power production performance (194.3 ± 12.50 mW/m²) during the BEF period. When modified with SnZVI, despite the decrease in the adsorption capacity and power output (102.05 ± 4.05 mW/m²), the SnZVI@PPC-2 exhibited the best ENR removal performance with that of 98.9 ± 0.2% in the EF period and 86.2 ± 5.6% during the BEF period. An increase in the current intensity and air flow rate promoted ENR degradation. Finally, swine wastewater was treated using the SnZVI@PPC-2 EF-BEF system, and 97.9 ± 1.3% of the TOC was removed using the combined system.

Current advances on the photocatalytic degradation of fluoroquinolones: photoreaction mechanism and environmental application

Heterogeneous photocatalysis is one of the most studied and promising techniques for degradation of contaminants of emerging concern, especially pharmaceuticals, and it represents a potential application in wastewater treatment of recalcitrant pollutants, such as fluoroquinolones, which are almost not abated by standard WWTPs. Although photodegradation partially contributes to alleviate their accumulation into the aquatic systems, heterogeneous photocatalysis assures complete sequestration and mineralization of FQs and their photoproducts and offers many advantages with respect to the other advanced oxidation processes (AOPs). The present brief review summarizes the most recent studies regarding the development and application of novel photocatalytic materials to the removal of FQs from contaminated waters. The collected data are arranged relating the mechanistic aspects to specific catalysts' properties, such as adsorption capacity, easy recovery, and reusability, especially under actual conditions.

One-step synthesis of garlic peel derived biochar by concentrated sulfuric acid: Enhanced adsorption capacities for Enrofloxacin and interfacial interaction mechanisms

This study put forward a one-step carbonization method by concentrated sulfuric acid to prepare garlic peel derived biochar, and the synthetic conditions were optimized by L₁₆(4⁵) orthogonal experiments. Notably, in order to study the differences between the proposed synthetic method and the conventional pyrolysis method, the concentrated sulfuric acid carbonized garlic peels biochar (CSGPB) was compared with pyrolysis derived garlic peel biochar (HTGPB) in characterization and adsorption capacities for Enrofloxacin (ENR). Results showed that CSGPB exhibited more graphite-like structures with more active functional groups on the surface, and the equilibrium adsorption capacity of CSGPB (142.3 mg g^-1) was 13.7 times of HTGPB (10.4 mg g^-1) under identical conditions. Moreover, the adsorption behaviors including adsorption kinetics, isotherms and thermodynamics of CSGPB for ENR were fully investigated and discussed. Based on the above experiments, density functional theory (DFT) simulations were performed to reveal the interfacial interaction and adsorption mechanism. Results showed π-π interaction between quinolone moieties of ENR and graphite-like structures in CSGPB might be the dominant mechanism. As for the functional groups, the adsorption energies were -40.46, -15.21 and -5.96 kJ mol^-1 for -SO₃H, -OH and -COOH, respectively, which indicated -SO₃H was the most active functional groups on the surface of CSGPB. This study provided a new sustainable perspective for the design of efficient biochars, and explored the interfacial interaction mechanism of antibiotics removal on biochars.

Graphene-based materials for metronidazole degradation: A comprehensive review

Due to its cytotoxic effect, metronidazole (MNZ) is a drug commonly used to treat bacterial, protozoal, and microaerophilic bacterial infections. After consumption, it undergoes a series of metamorphic reactions that lead to the degradation of oxidized, acetylated, and hydrolyzed metabolites in the environment. To eliminate such pollutants, due to their high potential, adsorption and photocatalysis extensive processes are used in which graphene can be used to improve efficiency. This review analyses the use of graphene as an absorbent and catalyst with a focus on absorption and photocatalytic degradation of MNZ by graphene-based materials (GBMs). The parameters affecting the adsorption, and photocatalytic degradation of MNZ are investigated and discussed. Besides, the basic mechanisms occurring in these processes are summarized and analyzed. This work provides a theoretical framework that can direct future research in the field of MNZ removal from aqueous solutions.

Recent advances in structural modifications of photo-catalysts for organic pollutants degradation - A comprehensive review

Over the last few years, industrial and anthropogenic activities have increased the presence of organic pollutants such as dyes, herbicides, pesticides, analgesics, and antibiotics in the water that adversely affect human health and the environment worldwide. Photocatalytic treatment is considered a promising, economical, effective, and sustainable process that utilizes light energy to degrade the pollutants in water. However, certain drawbacks like rapid recombination and low migration capability of photogenerated electrons and holes have restricted the use of photo-catalysts in industries. Hence, despite the abundance of lab-scale research, the technology is still not much commercialized in the mainstream. Several structural modifications in the photo-catalysts have been adopted to enhance the pollutant degradation performance to overcome the same. In this context, the present review article outlines the different advanced heterostructures synthesized to date for improved degradation of three major organic pollutants: antibiotics, dyes, and pesticides. Moreover, the article also emphasizes the degradation kinetics of photo-catalysts and the publication trend in the past decade along with the roadblocks preventing the transfer of technology from the laboratory to industry and new age photo-catalysts for the profitable implications in industrial sectors.

Graphitic carbon nitride/biochar composite synthesized by a facile ball-milling method for the adsorption and photocatalytic degradation of enrofloxacin

In order to enhance the removal performance of graphitic carbon nitride (g-C₃N₄) on organic pollutant, a simultaneous process of adsorption and photocatalysis was achieved via the compounding of biochar and g-C₃N₄. In this study, g-C₃N₄ was obtained by a condensation reaction of melamine at 550°C. Then the g-C₃N₄/biochar composites were synthesized by ball milling biochar and g-C₃N₄ together, which was considered as a simple, economical, and green strategy. The characterization of resulting g-C₃N₄/biochar suggested that biochar and g-C₃N₄ achieved effective linkage. The adsorption and photocatalytic performance of the composites were evaluated with enrofloxacin (EFA) as a model pollutant. The result showed that all the g-C₃N₄/biochar composites displayed higher adsorption and photocatalytic performance to EFA than that of pure g-C₃N₄. The 50% g-C₃N₄/biochar performed best and removed 45.2% and 81.1% of EFA (10 mg/L) under darkness and light with a dosage of 1 mg/mL, while g-C₃N₄ were 19.0% and 27.3%, respectively. Besides, 50% g-C₃N₄/biochar showed the highest total organic carbon (TOC) removal efficiency (65.9%). Radical trapping experiments suggested that superoxide radical (•O₂^-) and hole (h⁺) were the main active species in the photocatalytic process. After 4 cycles, the composite still exhibited activity for catalytic removal of EFA.

Visible-light harvesting innovative W6+/Yb3+/TiO2 materials as a green methodology photocatalyst for the photodegradation of pharmaceutical pollutants

In this work, we report on the synthesis of a new-age reusable visible-light photocatalyst using a heterojunction nanocomposite of W⁶⁺/Yb³⁺ on a mixed-phase mesoporous network of monolithic TiO₂. The structural properties of the monolithic photocatalysts are characterized using p-XRD, SEM-EDAX, TEM-SAED, XPS, PLS, UV-Vis-DRS, FT-IR, micro-Raman, TG-DTA, and N₂ isotherm analysis. The electron microscopic analysis reveals a mesoporous network of ordered worm-like monolithic design, with a polycrystalline mixed-phase (anatase/rutile) TiO₂ composite, as indicated by diffraction studies. The UV-Vis-DRS analysis reveals a redshift in the light absorption characteristics of the mixed-phase TiO₂ monolith as a function of W⁶⁺/Yb³⁺ co-doping. It is observed that the use of (8.0 mol%)W⁶⁺/0.4 (mole%)Yb³⁺ co-doped monolithic TiO₂ photocatalyst, with an energy bandgap of 2.77 eV demonstrates superior visible-light photocatalysis, which corroborates with the PLS studies in terms of voluminous e^-/h⁺ pair formation. The practical application of the photocatalyst has been investigated through a time-dependent dissipation of enrofloxacin, a widely employed antimicrobial drug, and its degradation pathway has been monitored by LC-MS-ESI and TOC analysis. The impact of physio-chemical parameters such as solution pH, sensitizers, drug concentration, dopant/codopant stoichiometry, catalyst quantity, and light intensity has been comprehensively studied to monitor the process efficiency.

In situ crystallization and growth of TiO2 nanospheres between MXene layers for improved adsorption and visible light photocatalysis

In situ crystallization and growth of TiO₂ nanospheres between MXene layers, which exhibited an intense adsorption capacity and improved visible light photocatalysis.

Chemical Compound Chemical Treatment in Animal Husbandry

The acidulant is widely used in the production of animal husbandry, and its use is affected by many factors, including environmental factors, dosage, diet composition, and animal’s own factors, so only the correct use of the acidulant can bring good results in animal production and financial income. This article takes acidifier as an example to study the application of compound chemical treatment in livestock farms. In this paper, the effect of using acidulant in the first 1 to 3 weeks after early weaning of piglets is obvious through this experimental study. The effect gradually decreases after 3 weeks and basically has no effect after 4 weeks. Experimental studies have found that the combination of organic acids, antibiotics, and high copper is the most effective. These three have different functions and have complementary or additive effects. Under harsh feeding conditions, especially when the environmental sanitation and environmental conditions are relatively poor, the effect of acidulants is better than good feeding conditions. Experimental data show that fulvic acid depletes milk’s somatic cells in a short period of time and then quickly activates immune function, which is indicated by the increase in lymphocytes in the blood. When a large number of somatic cells migrate to the breast, the somatic cells in milk will also increase, thereby improving the immunity mediated by human cells. The experimental results show that the BFA formula added 1% to the cattle feed. After the research control of this experiment, the milk output increased by 9–17%, and the quality milk output increased by 19.12%, so the use of acidulant increased feed compensation and reduces gastrointestinal diseases and the reproduction of microorganisms in the rumen of dairy cows.

Adsorption, degradation, and mineralization of emerging pollutants (pharmaceuticals and agrochemicals) by nanostructures: a comprehensive review

This review discusses a fresh pool of research findings reported on the multiple roles played by metal-based, magnetic, graphene-type, chitosan-derived, and sonicated nanoparticles in the treatment of pharmaceutical- and agrochemical-contaminated waters. Some main points from this review are as follows: (i) there is an extensive number of nanoparticles with diverse physicochemical and morphological properties which have been synthesized and then assessed in their respective roles in the degradation and mineralization of many pharmaceuticals and agrochemicals, (ii) the exceptional removal efficiencies of graphene-based nanomaterials for different pharmaceuticals and agrochemicals molecules support arguably well a high potential of these nanomaterials for futuristic applications in remediating water pollution issues, (iii) the need for specific surface modifications and functionalization of parent nanostructures and the design of economically feasible production methods of such tunable nanomaterials tend to hinder their widespread applicability at this stage, (iv) supplementary research is also required to comprehensively elucidate the life cycle ecotoxicity characteristics and behaviors of each type of engineered nanostructures seeded for remediation of pharmaceuticals and agrochemicals in real contaminated media, and last but not the least, (v) real wastewaters are extremely complex in composition due to the mix of inorganic and organic species in different concentrations, and the presence of such mixed species have different radical scavenging effects on the sonocatalytic degradation and mineralization of pharmaceuticals and agrochemicals. Moreover, the formulation of viable full-scale implementation strategies and reactor configurations which can use multifunctional nanostructures for the effective remediation of pharmaceuticals and agrochemicals remains a major area of further research.

The biosorptive uptake of enrofloxacin from synthetically produced contaminated water by tamarind seed derived activated carbon

The veterinary antibiotic enrofloxacin (ENR), an emerging contaminant, poses great concern due to its ubiquitous nature.

Removal of tylosin and copper from aqueous solution by biochar stabilized nano-hydroxyapatite

Antibiotics and heavy metals are frequently detected simultaneously in water environment. Effective elimination methods for antibiotics and heavy metals pollution should deserve our attention. This study investigates the adsorption performance of biochar modified with nano-hydroxyapatite (nHAP) on tylosin (TYL) and Cu from water simultaneously. Composite adsorbents of nHAP and biomass, derived from three waste residues, which were wood-processing residues (WR), wheat straw (WS) and Chinese medicine residues (CMR), were prepared. According to the results of orthogonal experiment, the degree of influence of the three factors on TYL and Cu were the pyrolysis temperature > the proportion of nHAP and biomass > the sources of biomass, and pyrolysis temperature> the sources of biomass> the proportion of nHAP and biomass, respectively. The optimum conditions for nHAP@biochar were screened. At pH < 7.0, the adsorption quality of TYL increased with pH increased, while at pH > 7.0, the adsorption quality of TYL changed slightly. At low pH, Cu and TYL could compete for the same adsorption sites on nHAP@biochars. The adsorption amount of TYL and Cu were both increased with increasing of the temperature. Compared with Langmuir model, Freundlich model could better fit the TYL adsorption on nHAP@biochars, with K_f values of TYL 62.35 (mmol/kg) (L/mmol)ⁿ (WR1) and 4.84 (mmol/kg) (L/mmol)ⁿ (CMR1), respectively.

Cetylpyridinium bromide assisted micellar-enhanced ultrafiltration for treating enrofloxacin-laden water

The presence of a fluoroquinolone base veterinary antibacterial drug enrofloxacin in aqueous media poses a major threat due to its ecotoxicity on aquatic microbiota. Hence, for the first time, an attempt was made to remove enrofloxacin (ENX) from its aqueous solution by employing micellar-enhanced ultrafiltration (MEUF) where cetylpyridinium bromide (CPB), a cationic surfactant was used for micellization. Response surface methodology (RSM) with central composite design (CCD) approach was applied to design the experiment, and to optimize the process parameters, namely, ENX concentration (3-15 mg/L), transmembrane pressure (2-6 kg_f/cm²), recirculation flow rate (5.5-7.5 L/min) and CPB concentration (1.4-4.2 mM). The objective of this study was to maximize the permeate flux and rejection coefficient and to find out the optimal process condition for the removal of enrofloxacin from aqueous solution. Though maximum 68.23 L/m² h of permeate flux and 94.20% of rejection coefficient were achieved at different process conditions, the optimization study reveals that the predicted optimal values of permeate flux and rejection coefficient are 67.53 L/m² h and 89.67% respectively. Modelling was also carried out with the aid of artificial neural network (ANN) to validate the prediction of RSM. The predictability of the model by RSM and ANN was compared statistically by evaluating root-mean-square error (RMSE), absolute average deviation (AAD) and mean absolute error (MAE), where ANN exhibited better predictability. The following set of parameters was proposed for industrial scale up: ENX concentration of 8.4 mg/L, TMP of 5 kg_f/cm², recirculation flow rate of 6 L/min and CPB concentration of 2.1 mM.

Synergy of Photocatalysis and Adsorption for Simultaneous Removal of Hexavalent Chromium and Methylene Blue by g-C3N4/BiFeO3/Carbon Nanotubes Ternary Composites

A novel graphite-phase carbon nitride (g-C₃N₄)/bismuth ferrite (BiFeO₃)/carbon nanotubes (CNTs) ternary magnetic composite (CNBT) was prepared by a hydrothermal synthesis. Using this material, Cr(VI) and methylene blue (MB) were removed from wastewater through synergistic adsorption and photocatalysis. The effects of pH, time, and pollutant concentration on the photocatalytic performance of CNBT, as well as possible interactions between Cr(VI) and MB species were analyzed. The obtained results showed that CNTs could effectively reduce the recombination rate of electron-hole pairs during the photocatalytic reaction of the g-C₃N₄/BiFeO₃ composite, thereby improving its photocatalytic performance, while the presence of MB increased the reduction rate of Cr(VI). After 5 h of the simultaneous adsorption and photocatalysis by CNBT, the removal rates of Cr(VI) and MB were 93% and 98%, respectively. This study provides a new theoretical basis and technical guidance for the combined application of photocatalysis and adsorption in the treatment of wastewaters containing mixed pollutants.

Graphene and graphene-based nanocomposites used for antibiotics removal in water treatment: A review

Due to their extensive application in human and veterinary medicine, antibiotics have been found worldwide and studied as new pollutants in the aquatic environment. In order to remove such pollutants, adsorption and photocatalysis have attracted tremendous attention because of their great potential in antibiotics removal from aqueous solutions. Graphene, as a novel two-dimensional nanomaterial, possesses unique structure and physicochemical properties, which can be used to efficiently adsorb and photodegrade antibiotics. This review provides an overview of the adsorptive and catalytic properties of graphene, and recent advances in adsorption and photodegradation of antibiotics by graphene and its derivatives. The factors that affect the adsorption and photodegradation of antibiotics are reviewed and discussed. Furthermore, the underlying mechanisms of adsorption and photodegradation are summarized and analyzed. Meanwhile, statistical analysis is conducted based on the number of papers and the maximum adsorption and photodegradation ability on various antibiotics removal. Finally, some unsolved problems together with major challenges that exist in the fabrication and application of graphene-based nanocomposites and the development for antibiotics removal is also proposed. This work provides theoretical guidance for subsequent research in the field of adsorption and photocatalytic removal of antibiotics from aqueous solution, especially on influence factors and mechanisms aspects.

Comprehensive analysis on sorptive uptake of enrofloxacin by activated carbon derived from industrial paper sludge

The current investigation deals with how chemically activated carbon derived from industrial paper sludge (ACPS) performs on sorptive removal of enrofloxacin (ENF), an antibacterial drug from its water solution. Thermogravimetric (TGA) and proximate analysis of raw paper sludge (RPS) were conducted. ACPS was characterized with proximate analysis, XRD, FT-IR, SEM and BET. The influence of five operational parameters viz. adsorbate concentration (initial), dose of adsorbent, pH, temperature, and contact time on the adsorption of ENF onto ACPS has been conducted using batch experiments. The process of adsorption was optimized through ANN (artificial neural network) in addition to RSM (response surface methodology). The maximum percentage removal (95.85%) was achieved at initial ENF concentration 12 mg/g, adsorbent dose 1.2 g/L, contact duration of 18 h and temperature 20 °C. Kinetic data were best fitted into pseudo-second order kinetic model and adsorption equilibrium study indicates that the adsorption process follows Langmuir isotherm model. Adsorption capacity was noted to have a highest value of 44.44 mg/g. A study on thermodynamics of the adsorption process suggests that it exhibits spontaneity, being essentially exothermic. Cost analysis and reusability study confirm that adsorbent produced from industrial paper sludge is cost-effective and reusable. Therefore, ACPS as adsorbent has potency for removing ENF from aqueous solution.

NaYF4:Yb,Tm@TiO2 core@shell structures for optimal photocatalytic degradation of ciprofloxacin in the aquatic environment

The removal of antibiotic residues in the aquatic environment is still a big challenge in environmental protection. Here, we developed NaYF₄:Yb,Tm@TiO₂ as a highly efficient photocatalyst for photocatalytic degradation of ciprofloxacin (CIP), a representative antibiotic in water under simulated solar irradiation. NaYF₄:Yb,Tm@TiO₂ can efficiently utilize a broad spectrum of solar energy to improve the efficiency of ciprofloxacin removal from an aquatic environment. The optimum operation conditions of photocatalyst dosage, pH value, and initial concentrations of CIP were determined by a series of contrast experiments. The dynamic process of CIP removal was monitored by UV-vis spectrophotometry, and can be well predicted by a pseudo first order model. The optimal conditions of photocatalyst dosage, initial concentration of CIP and pH value for CIP photocatalytic degradation were 1 g L⁻¹, 10⁻⁵ M and 8, respectively. This study provides an efficient method for antibiotic removal and enables a promising strategy for other organic water pollutant treatments.

The study indicated the optimum operation conditions to effectively remove ciprofloxacin from aquatic environment by NaYF₄:Yb,Tm@TiO₂ structures.

Aqueous removal of inorganic and organic contaminants by graphene-based nanoadsorbents: A review

Various graphene-based nanoadsorbents, including graphenes, graphene oxides, reduced graphene oxides, and their nanocomposites, have been widely studied as potential adsorbents due to their unique physicochemical properties, such as structural variability, chemical strength, low density, and the possibility of large scale fabrication. Adsorption mechanisms are governed largely by the physicochemical properties of contaminants, the characteristics of nanoadsorbents, and background water quality conditions. This review summarizes recent comprehensive studies on the removal of various inorganic (mainly heavy metals) and organic contaminants by graphene-based nanoadsorbents, and also discusses valuable information for applications of these nanoadsorbents in water and wastewater treatment. In particular, the aqueous removal of various contaminants was reviewed to (i) summarize the general adsorption capacities of various graphene-based nanoadsorbents for the removal of different inorganic and organic contaminants, (ii) evaluate the effects of key water quality parameters such as pH, temperature, background major ions/ionic strength, and natural organic matter on adsorption, (iii) provide a comprehensive discussion of the mechanisms that influence adsorption on these nanoadsorbents, and (iv) discuss the potential regeneration and reusability of nanoadsorbents. In addition, current challenges and future research needs for the removal of contaminants by graphene-based nanoadsorbents in water treatment processes are discussed briefly.

Individual and combined effects of enrofloxacin and cadmium on soil microbial biomass and the ammonia-oxidizing functional gene

The negative effects of residues from antibiotics and heavy metals in agricultural soils are becoming an increasingly frequent concern. To evaluate the toxicity and interaction of antibiotics and heavy metals, enrofloxacin (ENR) and cadmium (Cd) were used as targets to study the individual effects of ENR (0.025, 0.1, 0.4mmol/kg) and Cd (0.4mmol/kg) and their combined effects (mole ratios of ENR to Cd of 1: 1, 1: 4 and 1: 16) on soil microbial biomass and function on days 7, 14, 21 and 28 of the study. The results demonstrated that microbial populations, which were counted during 4 sampling periods, were mainly in the order of bacteria>actinomycetes>fungi. The ammonia monooxygenase (amoA) gene copies of ammonia-oxidizing archaea (AOA) were more abundant than ammonia-oxidizing bacteria (AOB) on days 14 and 21. Soil bacteria, fungi, and actinomycetes numbers and amoA gene abundances of AOB and AOA in soils were inhibited to varying degrees by the single and combined effects of ENR and Cd; the higher the concentration of the treatments, the stronger the inhibition. The combined toxicity of ENR and Cd on soil microbes and AOA- and AOB-amoA genes was stronger than when either chemical was used alone; the interaction effects of ENR and Cd were mainly antagonistic. Moreover, the ratios of bacteria/fungi declined significantly on days 14, 21 and 28; the proportions of AOA- and AOB-amoA were altered with the addition of ENR and Cd. Thus, ENR and Cd had significant negative effects on the soil microbial community, especially when both contaminants were present.

Methacrylate-Stitched β-Cyclodextrin Embedded with Nanogold/Nanotitania: A Skin Adhesive Device for Enhanced Transdermal Drug Delivery

Transdermal (TD) drug delivery is a more attractive technique for drug delivery compared to oral and intravenous injection. However, the permeation of drug molecules across the skin is difficult due to the presence of highly ordered lipid barrier. This study details the development of a novel TD system, which has the potential to simultaneously enhance the skin permeability and adhesion behavior. Ibuprofen (IP) was selected as model drug. The ability of gold nanoparticle (AuNP) and hydrophobic titanium nanotube (TNT) to enhance the skin permeability was explored. Additionally, β-cyclodextrin (βCD), which can exceptionally encapsulate poorly water-soluble drugs, is grafted with methacrylates to improve the skin adhesion property. Finally, Au-TNT nanocomposite was deposited onto methacrylate-grafted βCD matrix. The developed material was characterized through NMR spectroscopy, infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Raman spectroscopy. The characteristics of the film, including water vapor permeability (WVP), thermomechanical properties, etc., were examined in terms of Au-TNT content. The TD delivery of IP with different concentrations of Au-TNT was evaluated via an in vitro skin permeation study through rat skin. It is revealed that the prepared TD film exhibited an improved drug-delivery performance due to the synergistic action of AuNP and hydrophobic TNT. The cumulative percent of IP delivered across the skin is extremely depending on nanofiller content, lipophilicity, and thickness of the membrane, and the device incorporated with 4.0% Au-TNT displayed the best performance. In addition, a study on storage stability was performed by storing the films for 2 months at different temperatures. The study revealed that the device possessed excellent storage stability when stored at low temperature. The developed film offers excellent WVP, drug encapsulation efficiency, thermomechanical properties, and skin adhesion behavior. Moreover, the device was cosmetically attractive, noncytotoxic, and resistant to microbial growth and hence extremely reliable for skin application. The developed skin permeation strategy may open new avenues in TD drug delivery.