Adsorption of organic arsenic acids from water over functionalized metal-organic frameworks

Macro-manufacturing robust and stable metal-organic framework beads for antibiotics removal from wastewater

Metal-organic frameworks (MOFs) have shown great prospects in wastewater remediation. However, the easy aggregation, difficult separation and inferior reusability greatly limit their large-scale application. Herein, we proposed a facile, green and low-cost strategy to construct robust and stable MOF-based hydrogel beads (Fe-BTC-HBs) in a gram scale, and employed them to remove antibiotics from wastewater. As a result, the Fe-BTC-HBs demonstrated outstanding adsorption capacity for both ofloxacin (OFL) and tetracycline (TC) (281.17 mg/g for OFL and 223.60 mg/g for TC) under a near-neutral environment. The main adsorption mechanisms of OFL and TC were hydrogen bonding and π-π stacking interaction. Owing to its macroscopic granule and stable structure, Fe-BTC-HBs can be separated rapidly from wastewater after capturing antibiotics, and more than 85% adsorption capacity still remained after six cycles, while the powdered Fe-BTC only showed less than 6% recovery efficiency with massive weight loss (around 92%). In real industrial effluent, the adsorption performance of Fe-BTC-HBs toward two antibiotics exhibited negligible decreases (2.9% for OFL and 2.2% for TC) compared with that in corresponding solutions. Furthermore, Fe-BTC-HBs also had appealing economic and environmental benefit. Overall, the macro-manufactured MOF beads have the promising potential for the large-scale wastewater treatment.

Efficient dispersive solid phase extraction of trace nitrophenol pollutants in water with triazine porous organic polymer modified nanofiber membrane

Detecting trace endocrine disruptors in water is crucial for evaluating the water quality. In this work, a innovative modified polyacrylonitrile@cyanuric chloride-triphenylphosphine nanofiber membrane (PAN@CC-TPS) was prepared by in situ growing triazine porous organic polymers on the polyacrylonitrile (PAN) nanofibers, and used in the dispersive solid phase extraction (DSPE) to enrich trace nitrobenzene phenols (NPs) in water. The resluted PAN@CC-TPS nanofiber membrane consisted of numerous PAN nanofibers cover with CC-TPS solid spheres (∼2.50 μm) and owned abundant functional groups, excellent enrichment performance and good stability. In addition, the method based on PAN@CC-TPS displayed outstanding capacity in detecting the trace nitrobenzene phenols, with 0.50-1.00 μg/L of the quantification, 0.10-0.80 μg/L of the detection limit, 85.35-113.55 % of the recovery efficiency, and 98.08-103.02 of the enrichment factor, which was comparable to most materials. Meanwhile, when PAN@CC-TPS was adopted in the real water samples (sea water and river water), the high enrichment factors and recovery percentages strongly confirmed the feasibility of PAN@CC-TPS for enriching and detecting the trace NPs. Besides, the related mechanism of extracting NPs on PAN@CC-TPS mainly involved the synergistic effect of hydrogen bonding, π-π stacking and hydrophobic effect.

Adsorption behavior and mechanism of modified Fe-based metal-organic framework for different kinds of arsenic pollutants

Arsenic in water environment can present significant threats to human health, and eliminating arsenic pollutants from wastewater is crucial. Based on our previously reported work, this study delved into the adsorption behavior and mechanism of different arsenic contaminants (p-ASA, ROX, As(V), and DMA) on the activated Fe-based metal-organic framework (activated MIL-88A). The results show that activated MIL-88A exhibits exceptional adsorption capabilities toward diverse arsenic pollutants. The adsorption process is endothermic, spontaneous, and viable, and chemical adsorption plays a leading role. The remarkable adsorption capacity of activated MIL-88A to various arsenic pollutants is primarily attributed to coordination, while hydrogen bonding also assumes a significant role in the elimination of p-ASA and ROX. Additionally, we investigated the impact of arsenic molecule shape and size, solution pH, and the existence of specific anions and dissolved organic matter (DOM) on the adsorption of different arsenic pollutants. This study can provide valuable insights for further exploring the selective adsorption of different kinds of arsenic species by Fe-based MOF materials and improving the adsorption efficiency of MOFs.

Adsorption Behavior of Organoarsenicals over MnFe2O4-Graphene Hybrid Nanocomposite: The Role of Organoarsenic Chemical Structures

As a kind of emerging contaminant, organoarsenic compounds have drawn wide concern because of their considerable solubilities in water, and the highly toxic inorganic arsenic species formed during their biotic and abiotic degradation in the natural environment. Thus, the effective removal and studying of the adsorption mechanism of organoarsenic compounds are of significant urgency. In this work, MnFe2O4 and MnFe2O4/graphene were prepared through a facile solvothermal method. From the results of the Transmission Electron Microscope (TEM) characterization, it can be found that MnFe2O4 nanoparticles were uniformly distributed on the surface of the graphene. And the specific surface area of the MnFe2O4/graphene was about 146.39 m2 g-1, much higher than that of the MnFe2O4 (86.15 m2 g-1). The interactions between organoarsenic compounds and adsorbents were conducted to study their adsorption behavior and mechanism. The maximum adsorption capacities of MnFe2O4/graphene towards p-arsanilic acid (p-ASA) and roxarsone (ROX) were calculated to be 22.75 and 30.59 mg g-1. Additionally, the ionic strength, negative ions, and humus were introduced to investigate the adsorption performance of organoarsenic compounds. Electrostatic adsorption and surface complexation are the primary adsorption mechanisms on account of X-ray photoelectron spectroscopy (XPS) and the Fourier-transform infrared spectroscopy (FT-IR) analysis. This research extends the knowledge into studying the interaction between organoarsenic species and hybrid nanomaterials in the natural environment.

Prediction of arsenic adsorption onto metal organic frameworks and adsorption mechanisms interpretation by machine learning

Metal-organic frameworks (MOFs) are promising adsorbents for the removal of arsenic (As) from wastewater. The As removal efficiency is influenced by several factors, such as the textural properties of MOFs, adsorption conditions, and As species. Examining all of the relevant factors through traditional experiments is challenging. To predict the As adsorption capacities of MOFs toward organic, inorganic, and total As and reveal the adsorption mechanisms, four machine learning-based models were developed, with the adsorption conditions, MOF properties, and characteristics of different As species as inputs. The results demonstrated that the extreme gradient boosting (XGBoost) model exhibited the best predictive performance (test R2 = 0.93-0.96). The validation experiments demonstrated the high accuracy of the inorganic As-based XGBoost model. The feature importance analysis showed that the concentration of As, the surface area of MOFs, and the pH of the solution were the three key factors governing inorganic-As adsorption, while those governing organic-As adsorption were the concentration of As, the pHpzc value of MOFs, and the oxidation state of the metal clusters. The formation of coordination complexes between As and MOFs is possibly the major adsorption mechanism for both inorganic and organic As. However, electrostatic interaction may have a greater effect on organic-As adsorption than on inorganic-As adsorption. Overall, this study provides a new strategy for evaluating As adsorption on MOFs and discovering the underlying decisive factors and adsorption mechanisms, thereby facilitating the investigation of As wastewater treatment.

3D-Printed MOFs/Polymer Composite as a Separatable Adsorbent for the Removal of Phenylarsenic Acid in the Aqueous Solution

Metal-organic frameworks (MOFs) are emerging as advanced nanoporous materials to remove phenylarsenic acid, p-arsanilic acid (p-ASA), and roxarsone (ROX) in the aqueous solution, while MOFs are often present as powder state and encounter difficulties in recovery after adsorption, which greatly limit their practical application in the aqueous environments. Herein, MIL-101 (Fe), a typical MOF, was mixed with sodium alginate and gelatin to prepare MIL-101@CAGE by three-dimensional (3D) printing technology, which was then used as a separatable adsorbent to remove phenylarsenic acid in the aqueous solution. The structure of 3D-printed MIL-101@CAGE was first characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and thermogravimetry and differential thermogravimetry (TG-DTG). The octahedral morphology of MIL-101 (Fe) was found unchanged during the 3D printing process. Then, the adsorption process of MIL-101@CAGE on phenylarsenic acids was systematically investigated by adsorption kinetics, adsorption isotherms, adsorption thermodynamics, condition experiments, and cyclic regeneration experiments. Finally, the adsorption mechanism between MIL-101@CAGE and phenylarsenic acid was further investigated. The results showed that the Langmuir, Freundlich, and Temkin isotherms were well fit, and according to the Langmuir fitting results, the maximum adsorption amounts of MIL-101@CAGE on p-ASA and ROX at 25 °C were 106.98 and 120.28 mg/g, respectively. The removal of p-ASA and ROX by MIL-101@CAGE remained stable over a wide pH range and in the presence of various coexisting ions. The regeneration experiments showed that the 3D-printed MIL-101@CAGE could still maintain a more than 90% removal rate after five cycles. The adsorption mechanism of this system might include π-π stacking interactions between the benzene ring on the phenylarsenic acids and the organic ligands in MIL-101@CAGE, hydrogen-bonding, and ligand-bonding interactions (Fe-O-As). This study provides a new idea for the scale preparation of a separatable and recyclable adsorbent based on MOF material for the efficient removal of phenylarsenic acid in the aqueous solution.

The adsorption mechanism of arsenic in flue gas over the P-doped carbonaceous adsorbent: Experimental and theoretical study

The utilization of carbon-based sorbent has gained extensive attention for arsenic removal from flue gas due to their high specific surface area, sufficient active sites and abundant sources. This study proposes that the addition of phosphorous could be used as an effective promoter for the activation and modification of carbonaceous sorbent to enhance their arsenic fixation capacity. Both experimental and density functional theory (DFT) methods were employed to systematically investigate the adsorption characteristics of arsenic over different carbon based sorbents. The results reveal that the modification of H3PO4 generated C-O-P, C-P-O, and C3-P-O functional groups on the surface of activated carbon, and the adsorption ability of H3PO4-modified activated carbon for gaseous arsenic was significantly improved compared with the untreated activated carbon. DFT calculations indicate that unsaturated C atoms on carbonaceous surface served as active sites during arsenic adsorption, the electronegativity of which could be enhanced by phosphorous functional group, thereby facilitating the adsorption of gaseous arsenic species. Additionally, the positive effect of the phosphorous functional group on arsenic adsorption is more pronounced on zigzag carbonaceous surface than on armchair carbonaceous surface. This work provides a theoretical basis of the development of high-performance biochar preparation for arsenic adsorption by explaining the promoting effect of phosphorous functional group on gaseous arsenic adsorption on carbonaceous surface.

Cellulose-based adsorbents for solid phase extraction and recovery of pharmaceutical residues from water

Cellulose has attracted interest from researchers both in academic and industrial sectors due to its unique structural and physicochemical properties. The ease of surface modification of cellulose by the integration of nanomaterials, magnetic components, metal organic frameworks and polymers has made them a promising adsorbent for solid phase extraction of emerging contaminants, including pharmaceutical residues. This review summarizes, compares, and contrasts different types of cellulose-based adsorbents along with their applications in adsorption, extraction and pre-concentration of pharmaceutical residues in water for subsequent analysis. In addition, a comparison in efficiency of cellulose-based adsorbents and other types of adsorbents that have been used for the extraction of pharmaceuticals in water is presented. From our observation, cellulose-based materials have principally been investigated for the adsorption of pharmaceuticals in water. However, this review aims to shift the focus of researchers to the application of these adsorbents in the effective pre-concentration of pharmaceutical pollutants from water at trace concentrations, for quantification. At the end of the review, the challenges and future perspectives regarding cellulose-based adsorbents are discussed, thus providing an in-depth overview of the current state of the art in cellulose hybrid adsorbents for extraction of pharmaceuticals from water. This is expected to inspire the development of solid phase exraction materials that are efficient, relatively cheap, and prepared in a sustainable way.

Current advances in the detection and removal of organic arsenic by metal-organic frameworks

Arsenic (As) is a highly toxic heavy metal and has been widely concerned for its hazardous environmental impact. Aromatic organic arsenic (AOCs) has been frequently used as an animal supplement to enhance feed utilization and prevent dysentery. The majority of organic arsenic could be discharged from the body and evolve as highly toxic inorganic arsenic that is hazardous to the environment and human health via biological conversion, photodegradation, and photo-oxidation. Current environmental issues necessitate the development and application of multifunctional porous materials in environmental remediation. Compared to the conventional adsorbent, such as activated carbon and zeolite, metal-organic frameworks (MOFs) exhibit a number of advantages, including simple synthesis, wide variety, simple modulation of pore size, large specific surface area, excellent chemical stability, and easy modification. In recent years, numerous scientists have investigated MOFs related materials involved with organic arsenic. These studies can be divided into three categories: detection of organic arsenic by MOFs, adsorption to remove organic arsenic by MOFs, and catalytic removal of organic arsenic by MOFs. Here, we conduct a critical analysis of current research findings and knowledge pertaining to the structural characteristics, application methods, removal properties, interaction mechanisms, and spectral analysis of MOFs. We summarized the application of MOFs in organic arsenic detection, adsorption, and catalytic degradation. Other arsenic removal technologies and conventional substances are also being investigated. This review will provide relevant scientific researchers with references.

Efficient removal of p-arsanilic acid and arsenite by Fe(II)/peracetic acid (Fe(II)/PAA) and PAA processes

The widespread occurrence of p-arsanilic acid (p-ASA) in natural environments poses big threats to the biosphere due to the generation of toxic inorganic arsenic (i.e., As(III) and As(V), especially As(III) with higher toxicity and mobility). Oxidation of p-ASA or As(III) to As(V) followed by precipitation of total arsenic using Fe-based advanced oxidation processes demonstrated to be a promising approach for the treatment of arsenic contamination. This study for the first time investigated the efficiency and inherent mechanism of p-ASA and As(III) oxidation by Fe(II)/peracetic acid (Fe(II)/PAA) and PAA processes. p-ASA was rapidly degraded by the Fe(II)/PAA process within 20 s at neutral to acidic pHs under different conditions, while it was insignificantly degraded by PAA oxidation alone. Lines of evidence suggested that hydroxyl radicals and organic radicals generated from the homolytic OO bond cleavage of PAA contributed to the degradation of p-ASA in the Fe(II)/PAA process. p-ASA was mainly oxidized to As (V), NH₄⁺, and p-aminophenol by the Fe(II)/PAA process, wherein the aniline group and its para position were the most vulnerable sites. As(III) of concern was likely generated as an intermediate during p-ASA oxidation and it could be readily oxidized to As(V) by the Fe(II)/PAA process as well as PAA alone. The in-depth investigation demonstrated that PAA alone was effective in the oxidation of As(III) under varied conditions with a stoichiometric molar ratio of 1:1. Efficient removal (> 80%) of total arsenic during p-ASA oxidation by Fe(II)/PAA process or during As(III) oxidation by PAA process with additional Fe(III) in synthetic or real waters were observed, mainly due to the adsorptive interactions of amorphous ferric (oxy)hydroxide precipitates. This study systematically investigates the oxidation of p-ASA and As(III) by the Fe(II)/PAA and PAA processes, which is instructive for the future development of arsenic remediation technology.

Detection of organic arsenic based on acid-base stable coordination polymer

Organic arsenic, usually found in animal feed and livestock farm wastewater, is a carcinogenic and life-threatening substance. Hence, for the rapid and sensitive detection of organic arsenic, the development of new fluorescent sensors is quite essential. Here, an acid-base stable coordination polymer (HNU-62) was constructed by the introduction of hydrophobic fluorescence ligand, which can be used as a highly selective sensor for the detection of roxarsone (ROX) in water. The limit of detection (LOD) of HNU-62 for ROX was 4.5 × 10^-6 M. Furthermore, HNU-62 also exhibits good anti-interference and recyclability, which can be used in detecting ROX in real samples of pig feed. This work provides an alternative approach for the construction of water-stable coordination polymer-based fluorescence sensors.

Zeolitic imidazolate framework-L loaded on melamine foam for removal tetracycline hydrochloride from water

Zeolitic imidazolate framework-L/melamine foam (ZIF-L/MF) is fabricated by an in situ growth method to treat the tetracycline hydrochloride in wastewater. The results show that a large amount of leaf-like ZIF-L is vertically grown on the MF surface. ZIF-L/MF exhibits well adsorption performance with a maximum adsorption ability of 1346 mg/g. The pseudo-second-order kinetic model and the Langmuir isotherm model are used to describe the adsorption process well. In addition, the influences of pH and coexisting ions are studied. According to the experimental data and analysis, the adsorption mechanisms may involve H-bonding, π-π interaction, and weak electrostatic interaction. A dynamic adsorption experiment is also performed, and the results show that the time required to achieve the same removal efficiency as static adsorption is reduced by half. This work shows that the obtained ZIF-L/MF has practical applications in antibiotic adsorption.

Arsenic removal from aqueous solution: A comprehensive synthesis with meta-data

Removal of arsenic from drinking water is one of the most important global concerns. Among the various techniques, adsorptive removal of arsenic is considered as a viable most effective method. However, limited attention is given to understand the overall relative sorption capacity of different sorbents (e.g., biocomposite, biochar and nano-composite etc.) since various factors influence the sorption capacity. The aim of this study is to assess the effectiveness of various adsorbents with quantitative estimation (Langmuir adsorption maxima, Qmax) as well as to evaluate the influence of experimental conditions on the achievement of maximum adsorption. A number of analyses including meta-analysis, analysis of variance (ANOVA), scientometric and regression were performed. The results revealed that among the sorbents, nanoparticles show the greatest sorption capacity while pre-doped biochar performed the best among different biochars. Average across all sorbents, As (V) removal efficacy was higher than As (III). As expected, a high point of zero charge (PZC) and higher positive surface charge favored adsorption. The relative contribution of different mechanisms was also discussed. Our scientometric analyses revealed that, research should focus on the development of low-cost adsorbents and increase their reusability, safe disposal of adsorbed arsenic. Altogether, our findings provide a molecular understanding of arsenic sorption to different sorbents with implications for tailoring a good sorbent for arsenic removal from drinking water.

Overview on recent advances of magnetic metal-organic framework (MMOF) composites in removal of heavy metals from aqueous system

Developing a novel, simple, and cost-effective analytical technique with high enrichment capacity and selectivity is crucial for environmental monitoring and remediation. Metal-organic frameworks (MOFs) are porous coordination polymers that are self-assembly synthesized from organic linkers and inorganic metal ions/metal clusters. Magnetic metal-organic framework (MMOF) composites are promising candidate among the new-generation sorbent materials available for magnetic solid-phase extraction (MSPE) of environmental contaminants due to their superparamagnetism properties, high crystallinity, permanent porosity, ultrahigh specific surface area, adaptable pore shape/sizes, tunable functionality, designable framework topology, rapid and ultrahigh adsorption capacity, and reusability. In this review, we focus on recent scientific progress in the removal of heavy metal ions present in contaminated aquatic system by using MMOF composites. Different types of MMOFs, their synthetic approaches, and various properties that are harnessed for removal of heavy metal ions from contaminated water are discussed briefly. Adsorption mechanisms involved, adsorption capacity, and regeneration of the MMOF sorbents as well as recovery of heavy metal ions adsorbed that are reported in the last ten years have been discussed in this review. Moreover, particular prospects, challenges, and opportunities in future development of MMOFs towards their greener synthetic approaches for their practical industrial applications have critically been considered in this review.

Recent developments in MOF and MOF based composite as potential adsorbents for removal of aqueous environmental contaminants

With the growth of globalization which has been the primary cause of water pollution, it is utmost necessary for us living being to have access to clean water for the purpose of drinking, washing and various other useful applications. With the purpose of future security and to restore our ecological balance, it is essential to give much significance towards the removal of unwanted toxic contaminants from our water resources. In this regard adsorptive removal of toxic pollutants from wastewater with porous adsorbent is regarded as one of the most promising way for water decontamination process. Metal organic frameworks (MOFs) comprising of uniformly arranged pores, abundant active sites and containing an easily tunable structure has aroused as a promising material for adsorbent to remove the unwanted contaminants from water sources. The adsorption of pollutants by the different MOFs surface are driven by various interactions including π-π, acid-base, electrostatic and H-bonding etc. On the other hand, the removal of various contaminants by MOFs is influenced by various factors including pH, temperature and initial concentration. In this review we will specifically discuss the adsorptive removal of different organic and inorganic pollutants present in our water systems with the use of MOFs as adsorbent along with the various factors and interaction mechanism manipulating the adsorption behaviour.

Functional group modified 1D interpenetrated metal-organic frameworks on perfluorooctanoic acid adsorption: Experimental and theoretical calculation study

Functional groups modified metal-organic frameworks (MOFs) was synthesized via a pre-tailor method and served as an adsorbent for perfluorooctanoic acid (PFOA) removal. The material was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction and N₂ sorption-desorption. Monte Carlo simulation and molecular dynamics are derived to predict the possible molecular packing and adsorption mechanism. The Hirshfeld surface with reduced density gradient analysis demonstrates that PFOA is adsorbed on MOF-X mainly affected by van der Waals interactions and steric effects. Adsorption kinetics and isotherms were investigated on the basis of a static experiment. The pseudo-second-order kinetic model and Langmuir isotherm were fitted well to characterize adsorption process. Hereinto, amino-modified MOFs reached the highest adsorption efficiency and the maximum capacity was 185.6 mg/g. Combing the experimental data with theoretical simulation, results indicated that functional group modification is an effective approach to alter the crystal structure and then affect the adsorptive properties of MOFs.

MIL series of metal organic frameworks (MOFs) as novel adsorbents for heavy metals in water: A review

With large specific surface area, abundant adsorption sites, flexible pore structure, and good water stability, Materials of Institute Lavoisier frameworks (MILs) have attracted increasing attention as effective environmental adsorbents. This review systematically analyzes and recapitulates recent progress in the synthesis and application of MIL-based adsorbents for the removal of aqueous heavy metal ions. Commonly used solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical syntheses of MILs are first summarized and compared. Instead of focusing on adsorption process parameters, adsorption performances and governing mechanisms of virgin MILs, functional MILs, MIL-based composites, and carbonized MILs to representative metal(loid) ions (chromium, arsenic, lead, cadmium, and mercury) in water under various conditions are then systematically reviewed and discussed. In the end, this work also outlines prospects and future directions to promote the applications of MILs in treating heavy metal contaminated water.

Rapid degradation of p-arsanilic acid and simultaneous removal of the released arsenic species by Co-Fe@C activated peroxydisulfate process

In this study, a bimetallic composite catalyst (Co-Fe@C) was fabricated with calcination at high temperature (800 °C) by using Co-MIL-101 (Fe) as the precursor. The characterization results showed that the resulted Co-Fe@C composite mainly consisted of carbon, FeCo alloys, Fe₃O₄, Co₃O₄ and FeO, and owned evident magnetism. In addition, the Co-Fe@C was employed to activate the peroxydisulfate (PDS) to degrade a representative organic pollutant (p-arsanilic acid, p-ASA) and the main factors were optimized, which involved 0.2 g L^-1 of catalyst dosage, 1.0 g L^-1 of PDS dosage and 5.0 of initial pH. Under the optimal condition, Co-Fe@C/PDS system could completely degrade p-ASA (20 mg L^-1) in 5 min. In the Co-Fe@C/PDS system, SO₄^-·, Fe(IV) and ·OH were the main species during p-ASA degradation. Under the attack of these species, p-ASA was first decomposed into phenols and then transformed into the organics acids and finally mineralized into CO₂ and H₂O through a series of reactions like hydroxylation, dearsenification, deamination and benzene ring opening. Importantly, most of the released inorganic arsenic species (93.40%) could be efficiently adsorbed by the catalyst.

Synthesis of aqueous media stable MIL101-OH/chitosan for diphenhydramine and metronidazole adsorption

In this study, pristine MIL101(Cr) was modified to synthesize hydroxyl-functionalized (MIL101(Cr)-OH) and chitosan (CS)-coated (MIL101(Cr)-OH/CS) metal-organic frameworks (MOFs) to enhance adsorption capacity and reusability, respectively. The synthesized adsorbents were characterized by XRD, FTIR, and BET analyses. The kinetics behavior and the equilibrium adsorption of diphenhydramine (DPH) and metronidazole (MNZ) from aqueous solution on the synthesized adsorbents and a commercial activated carbon were compared at 25°C. The pH-dependent of the adsorption capacity and reusability of MIL101-OH/CS were investigated. The results showed that upon adding OH functional group and chitosan polymer, the adsorption capacity increased; the DPH adsorption capacity on MIL101-OH and MIL101-OH/CS was 634 and 573 mg/g, respectively. Also, the maximum adsorption capacity of MNZ on MIL101-OH/CS was 600 mg/g, which was twice the adsorption capacity of MIL101 and four times the adsorption capacity of the commercial activated carbon. The equilibrium and kinetics behavior results were in good agreement with Langmuir and the pseudo-second-order models, respectively. The DPH and MNZ adsorption mechanisms on MIL101-OH/CS were hydrogen bonding and electrostatic interactions, respectively.

CTAB-functionalized δ-FeOOH for the simultaneous removal of arsenate and phenylarsonic acid in phenylarsenic chemical warfare

This study prepared a cetyltrimethylammonium bromide (CTAB) functionalized δ-FeOOH using the coprecipitation method to remove arsenate and phenylarsonic acid in water polluted by phenylarsonic chemical warfare agents. Under neutral conditions, the adsorption capacity for arsenate and phenylarsonic acid was 45.7 and 85.3 mg g^-1, respectively. The adsorption process conformed to the pseudo-second-order kinetics and Freundlich isothermal adsorption model, and the adsorption was spontaneous and endothermic. The CTAB-functionalized δ-FeOOH could effectively resist the interference of coexisting anions except for CO₃^2-, SiO₃^2- and PO₄^3-. Furthermore, the adsorption mechanism was proposed by combining the adsorption experimental results, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and density functional theory analyses. The results showed that the adsorption of arsenate by the CTAB-functionalized δ-FeOOH was mainly through the formation of bidentate-dinuclear inner-sphere complexes and electrostatic interactions. While for phenylarsonic acid, the formation of monodentate-mononuclear inner-sphere complexes on (100) and (110) crystal facets, and the formation of bidentate-dinuclear inner-sphere complexes on the (002) crystal facet, as well as hydrogen bonding, electrostatic interaction, and π-hydrophobic interaction between organic compounds were the primary mechanism. Moreover, the CTAB-functionalized δ-FeOOH could maintain about 60% of the adsorption capacity for the two pollutants after five cycles. Overall, CTAB-functionalized δ-FeOOH has good potential for the remediation of inorganic and organic arsenic-contaminated water bodies.

Efficient extraction of trace organochlorine pesticides from environmental samples by a polyacrylonitrile electrospun nanofiber membrane modified with covalent organic framework

Detecting and analyzing of the trace organochlorine pesticides (OCPs) in the real water has become a big challenge. In this work, a novel functional electrospun nanofiber membrane (PAN@COFs) was synthesized through the in situ growth of covalent organic frameworks (COFs) on a polyacrylonitrile electrospun nanofiber membranes under room temperature and used in the solid-phase micro-extraction (SPME) to enrich trace organochlorine pesticides (OCPs) in water. The resulted PAN@COFs composite consisted of numerous nanofibers coated ample porous COFs spheres (~ 500 nm) and owned stable crystal structure, abundant functional groups, good stability. In addition, the enrichment experiments clearly revealed that PAN@COFs exhibited rather outstanding performance on adsorbing the trace OCPs (as low as 10 ng L^-1) with the enrichment of 482-2686 times. Besides, PAN@COFs displayed good reusability and could be reused 100 times. Notably, in the real water samples (sea water and river water), the high enrichment factors and recovery rates strongly confirmed the feasibility of PAN@COFs for detecting the trace OCPs. Furthermore, due to the synergy of π-π stacking interaction and hydrophobic interaction between the OCPs molecules and PAN@COFs, the OCPs could be efficiently adsorbed on PAN@COFs, even under the extremely low driving force.

Facile fabrication of N-doped hierarchical porous carbons derived from soft-templated ZIF-8 for enhanced adsorptive removal of tetracycline hydrochloride from water

N-doped hierarchical porous carbons (NHPCs) were successfully prepared from soft-templated zeolitic imidazolate framework-8 (ZIF-8) precursors using sodium dodecylbenzene sulfonate (SDBS) as a template through facile one-step carbonization and applied in tetracycline hydrochloride (TCH) adsorption. The NHPC synthesized at 1000 °C with an SDBS/Zn²⁺ molar ratio of 0.075 exhibited the highest TCH adsorption (q_m = 80.92 mg g^-1) owing to its relatively large BET surface area (1067.41 m² g^-1) and pore volume (1.22 cm³ g^-1) and the stronger surface interaction between TCH and NHPCs (HC1000-0.075). Compared with surfactant-free ZIF-8-derived carbon (HC), introduction of SDBS in the ZIF-8 precursor not only improved the pore structure of the carbon materials but also increased the nitrogen content and the number of surface functional groups. Adsorption kinetics and isotherms showed that the pseudo-second-order model and Sips model fit the TCH adsorption behavior on HC and HC1000-0.075 well. Adsorption experiments and characterizations revealed that the adsorption mechanism involved in TCH adsorption on HC1000-0.075 mainly depended on the synergistic effect of pore filling, H-bonding, π-π interactions, and weak electrostatic interactions. This study provides an effective and simple strategy for fabricating MOF-derived NHPCs as a promising adsorbent for the removal of antibiotics from water.

Speciation characterization of arsenic-bearing phase in arsenic sulfide sludge and the sequential leaching mechanisms

Arsenic sulfide sludge (ASS) is a kind of deleterious waste which contains various valuable metallic elements, such as Re and Pb, which are always associated with arsenic-bearing phases in ASS. The leaching speed and efficiency of valuable elements may depend on the phase constitution. Here, we proposed a sequential leaching method to thoroughly understand the constitution of arsenic-bearing phase and the distribution of valuable elements in ASS. The results show that five major arsenic-bearing phases exist in ASS: amorphous As₂S₃, crystalline As₄S₄, As₂O₃, and As atoms dissolved into the lattice of PbS and PbSO₄ phases. Re is mainly distributed in As₂S₃ and As₄S₄ phases. During the leaching process, the dissolution of As₂O₃ particles and As₂O₃ layers on the surface of As₂S₃/As₄S₄ particles occurs first. Then, the reaction between As₂S₃/As₄S₄ particles and copper sulfate happens. The order of leaching sequence is As₂O₃, amorphous As₂S₃ and crystalline As₄S₄. The majority of Re element exists in the solution while almost all Pb element remains in the solid residues, which is beneficial for the separation and purification valuable elements individually. This work not only detailed determines the arsenic-bearing species, but also provides significant theoretical bases for extracting valuable elements from ASS.

Removal of p-arsanilic acid and phenylarsonic acid from water by Fenton coagulation process: influence of substituted amino group

Phenylarsonic acid compounds, which were widely used in poultry and swine production, are often introduced to agricultural soils with animal wastes. Fenton coagulation process is thought as an efficient method to remove them. However, the substituted amino group could apparently influence the removal efficiency in Fenton coagulation process. Herein, we investigated the optimal conditions to treat typical organoarsenic contaminants (p-arsanilic acid (p-ASA) and phenylarsonic acid (PAA)) in aqueous solution based on Fenton coagulation process for oxidizing them and capturing the released inorganic arsenic, and elucidated the influence mechanism of substituted amino group on removal. Results showed that the pH value and the dosage of H₂O₂ and Fe²⁺ significantly influenced the performance of the oxidation and coagulation processes. The optimal conditions for removing 20 mg L^-1-As in this research were 40mg L^-1 Fe²⁺ and 60mg L^-1 H₂O₂ (the mass ratio of Fe²⁺/H₂O₂ = 1.5), initial solution pH of 3.0, and final solution pH of 5.0 adjusting after 30-min Fenton oxidation reaction. Meanwhile, the substituted amino group made p-ASA much more easily be attacked by ·OH than PAA and supply one more binding sites for forming complexes with Fe³⁺ hydrolysates, resulting in 36% higher oxidation rate and 7% better coagulation performance at the optimal conditions.

Chitin/Metal-Organic Framework Composites as Wide-Range Adsorbent

Composites based on chitin (CH) biopolymer and metal-organic framework (MOF) microporous nanoparticles have been developed as broad-scope pollutant absorbent. Detailed characterization of the CH/MOF composites revealed that the MOF nanoparticles interacted through electrostatic forces with the CH matrix, inducing compartmentalization of the CH macropores that led to an overall surface area increase in the composites. This created a micro-, meso-, and macroporous structure that efficiently retained pollutants with a broad spectrum of different chemical natures, charges, and sizes. The unique prospect of this approach is the combination of the chemical diversity of MOFs with the simple processability and biocompatibility of CH that opens application fields beyond water remediation.

Porous biochar-supported MnFe2O4 magnetic nanocomposite as an excellent adsorbent for simultaneous and effective removal of organic/inorganic arsenic from water

To solve the problem of organic and inorganic arsenic species contamination in drinking water and/or wastewater, porous biochar-supported MnFe₂O₄ magnetic nanocomposite (BC-MF) was successfully fabricated and used as an excellent adsorbent for simultaneous removal of p-ASA and As(V) from water environment. This obtained BC-MF displayed remarkable adsorption performance for both p-ASA and As(V) removal at acidic and neutral pH (3-7), and di-anionic and mono-anionic species of p-ASA and As(V) facilitated the adsorption process. Specifically, BC-MF exceeded some reported adsorbents, and the adsorption capacities of p-ASA and As(V) were approximately 105 and 90 mg/g at a 10 μg/L equilibrium concentration. Satisfactory adsorption behavior including adsorption isotherms, competitive ions, humic acid (HA), and regeneration/reusability property in single and binary systems demonstrated the BC-MF can improve the potential application for arsenic-containing wastewater remediation. Proposed adsorption mechanism indicated that electrostatic interaction and surface complexation were involved the p-ASA and As(V) immobilization, whereas hydrogen bonding and π-π interactions may also contribute to the p-ASA removal. Additionally, the prominent sequestration p-ASA and As(V) performance in different water matrix and fixed-bed column studies indicated that BC-MF was a promising nanocomposite for simultaneously removal of organic and inorganic arsenic species in practical wastewater treatment.

Interface-Promoted Direct Oxidation of p-Arsanilic Acid and Removal of Total Arsenic by the Coupling of Peroxymonosulfate and Mn-Fe-Mixed Oxide

As one of the extensively used feed additives in livestock and poultry breeding, p-arsanilic acid (p-ASA) has become an organoarsenic pollutant with great concern. For the efficient removal of p-ASA from water, the combination of chemical oxidation and adsorption is recognized as a promising process. Herein, hollow/porous Mn-Fe-mixed oxide (MnFeO) nanocubes were synthesized and used in coupling with peroxymonosulfate (PMS) to oxidize p-ASA and remove the total arsenic (As). Under acidic conditions, both p-ASA and total As could be completely removed in the PMS/MnFeO process and the overall performance was substantially better than that of the Mn/Fe monometallic system. More importantly, an interface-promoted direct oxidation mechanism was found in the p-ASA-involved PMS/MnFeO system. Rather than activate PMS to generate reactive oxygen species (i.e., SO₄^·-, ·OH, and ¹O₂), the MnFeO nanocubes first adsorbed p-ASA to form a ligand-oxide interface, which improved the oxidation of the adsorbed p-ASA by PMS and ultimately enhanced the removal of the total As. Such a direct oxidation process achieved selective oxidation of p-ASA and avoidance of severe interference from the commonly present constituents in real water samples. After facile elution with dilute alkali solution, the used MnFeO nanocubes exhibited superior recyclability in the repeated p-ASA removal experiments. Therefore, this work provides a promising approach for efficient abatement of phenylarsenical-caused water pollution based on the PMS/MnFeO oxidation process.

Adsorptive removal of hazardous organics from water and fuel with functionalized metal-organic frameworks: Contribution of functional groups

The purification of contaminated water and fuel is very important for our sustainability. Adsorptive removal has attracted significant attention because of possible applications in industry and the rapid development of metal-organic frameworks (MOFs), which can be competitive adsorbents. In this review, the possible/competitive purification of water (contaminated with organics) and fuel (composed of S- and N-Containing compounds) via adsorption using MOFs, especially those with various functional groups (FGs), will be discussed. The contribution of FGs such as -OH, -COOH, -SO₃H, -NH₂, and -NH₃⁺ to adsorption/purification will be analyzed in detail, not only to understand the plausible adsorption mechanism but also to utilize specific FGs in adsorption. Moreover, methods for introducing FGs onto MOFs will be summarized. Finally, the prospects for both adsorption/removal and emerging fields will be suggested. Studies for practical applications in industry with shaped MOFs from inexpensive route will be important. The solution pH should be considered for the adsorption of aqueous solution. Applications of MOFs in other fields like storage/delivery and enrichment of analytes might be deeply studied.

Adsorptive removal of pharmaceuticals from water using metal-organic frameworks: A review

Pharmaceutical pollution has emerged as a highly concerned issue due to its adverse effects. Elevated concentrations of pharmaceuticals in water should be regulated to satisfy the requirement for the provision of clean water. Metal-organic frameworks (MOFs) with high specific surface area, controllable porous structure, and facile modification can serve as promising adsorbents for the removal of pharmaceutical contaminants from water. In this review, a selected collection illustrating the reliable strategies and concepts to prepare the MOFs-based materials with superior water stability is described. In addition, recent progress on the adsorptive removal of pharmaceutical pollutant using burgeoning and functional MOFs is also summarized in terms of maximum capacity, equilibrium time, and regenerate ability. Meanwhile, to understand the adsorption mechanism, related interactions including coordination with unsaturated site, pore-filling effect, hydrogen bonding, electrostatic, and π-π stacking are further discussed. Finally, critical perspectives/assessment of future research emphasising on fabricating desirable MOFs and establishing structure-property relationships to facilitate capture performance are identified.

Effective and simultaneous removal of organic/inorganic arsenic using polymer-based hydrated iron oxide adsorbent: Capacity evaluation and mechanism

In this study, resin-based hydrated iron oxide (HFOR) composites were prepared and used as a functional adsorbent for the simultaneous removal of p-Arsanilic acid (p-ASA) and arsenate (As (V)). The effects of solution pH and coexisting substances on the adsorption of different arsenic species were also investigated. Results showed that the coexisting substances slightly affected the adsorption process of two arsenic species. Analysis of the adsorption behavior, isotherm equilibrium, and adsorption kinetics, as well as that results of the X-ray photoelectron spectroscopy, zeta potential, and other analytical methods revealed that the satisfactory adsorption performance of HFOR can be attributed to the electrostatic interactions induced by the positively charged groups and the coordination of the hydrated iron oxide nanoparticles, which exhibited excellent specific adsorption for both arsenic species. Moreover, HFOR showed high acid and alkali resistance and reusability, as well as a constant co-removal performance for different arsenic species in five consecutive operating cycles (55 mg As/g of As(V) and 18 mg/g of p-ASA). Results of continuous running fixed-bed column experiments confirmed that HFOR enabled excellent simultaneous adsorption for p-ASA and As(V).

Review: Efficiently performing periodic elements with modern adsorption technologies for arsenic removal

Arsenic (As) toxicity is a global phenomenon, and it is continuously threatening human life. Arsenic remains in the Earth's crust in the forms of rocks and minerals, which can be released into water. In addition, anthropogenic activity also contributes to increase of As concentration in water. Arsenic-contaminated water is used as a raw water for drinking water treatment plants in many parts of the world especially Bangladesh and India. Based on extensive literature study, adsorption is the superior method of arsenic removal from water and Fe is the most researched periodic element in different adsorbent. Oxides and hydroxides of Fe-based adsorbents have been reported to have excellent adsorptive capacity to reduce As concentration to below recommended level. In addition, Fe-based adsorbents were found less expensive and not to have any toxicity after treatment. Most of the available commercial adsorbents were also found to be Fe based. Nanoparticles of Fe-, Ti-, Cu-, and Zr-based adsorbents have been found superior As removal capacity. Mixed element-based adsorbents (Fe-Mn, Fe-Ti, Fe-Cu, Fe-Zr, Fe-Cu-Y, Fe-Mg, etc.) removed As efficiently from water. Oxidation of AsO₃^3- to AsO₄^3-and adsorption of oxidized As on the mixed element-based adsorbent occurred by different adsorbents. Metal organic frameworks have also been confirmed as good performance adsorbents for As but had a limited application due to nano-crystallinity. However, using porous materials having extended surface area as carrier for nano-sized adsorbents could alleviate the separation problem of the used adsorbent after treatment and displayed outstanding removal performances.

Lignin-based magnetic activated carbon for p-arsanilic acid removal: Applications and absorption mechanisms

It is crucial for water environment security to remove its p-arsanilic acid (p-ASA) efficiently. Namely, removing p-arsanilic acid from aqueous media through magnetic separation, has become a novel method of removing toxic pollutants from water. Batch adsorption experiments demonstrated a higher adsorption of lignin-based magnetic activated carbon (201.64 mg g^-1) toward p-ASA. In addition, LMAC nanoparticles exhibited typical magnetism (35.63 emu g^-1 of saturation magnetization) and could be easily separated from the aqueous solution. Meanwhile, the endothermic adsorption of p-ASA over LMAC could spontaneously proceed and be well described by the pseudo-first-order and pseudo-second-order model as well as the intra-particle diffusion model. Moreover, the mechanisms during p-ASA adsorption over LMAC included the electrostatic attraction, surface complexation, π-π stacking and hydrogen bonding interaction. Importantly, lignin-based magnetic activated carbon has high absorbability and preferable reusability in real water samples. Consequently, this paper provides insights into preparation of the lignin-based magnetic activated carbon may be potential adsorbents for the remediation of organoarsenic compounds.

Facile fabrication of pH-sensitive nanoparticles based on nanocellulose for fast and efficient As(V) removal

This study reported a facile method to synthesize novel pH-sensitive nanoparticle based on nanocellulose, involving cross-linking polyethyleneimine and glutaraldehyde. The adsorbent was characterized and found to be sensitive to the solution pH, especially at pH 3. Additionally, the biosorbent exhibited rapid adsorption during the initial 10 min and the As(V) adsorption capacity of the nanoparticles reached approximately 255.19 mg g^-1 at pH 3, which was five times greater than that achieved with the As(V) solution at its initial pH (44.33 mg g^-1). To reflect its performance in actual acidic wastewater, the effects of coexisting anions were also investigated, showing that these anions had little influence on As(V) adsorption. Meanwhile, the adsorbent displayed excellent performance even after eight regeneration cycles. This novel material demonstrates enormous potential for the removal of arsenic contaminants and for the development of pH-sensitive materials.

Superior removal of inorganic and organic arsenic pollutants from water with MIL-88A(Fe) decorated on cotton fibers

Arsenic contamination has attracted worldwide concerns, owing to its toxicity and severe threat to human and environment. It is urgent to develop efficient adsorbents to remove arsenic pollutants. Within this paper, both pristine MIL-88A(Fe) and MIL-88A(Fe) decorated on cotton fibers were successfully fabricated using an eco-friendly method. The pristine MIL-88A(Fe) displayed outstanding adsorption performances towards four selected arsenic pollutants, in which the adsorption capacities toward As(III), As(V), ROX and ASA were 126.5, 164.0, 261.4 and 427.5 mg g^-1, respectively. Additionally, MIL-88A(Fe) exhibited excellent removal efficiencies in a wide pH range and with the presence of different co-existing ions. It was proposed that the coordinative interactions of As-O-Fe between arsenic pollutants and MIL-88A(Fe) contributed to the superior adsorption performances. Furthermore, two MIL-88A(Fe)/cotton fibers composites were synthesized by both post synthesis (MC-1) and in-situ synthesis (MC-2), which demonstrated identically outstanding adsorption activities toward four selected arsenic pollutants. MC-1 and MC-2 enhanced the stability and reusability of MIL-88A(Fe), which was challenging issues of pristine MIL-88A(Fe) powder. Additionally, the fixed-bed column packed by MC-1 or MC-2 can continuously eliminate arsenic pollutants from the water flow. This work provided a new possibility of metal-organic frameworks to accomplish potentially large-scale application to purify the arsenic-contaminated water.

Highly efficient removal of p-arsanilic acid with Fe(II)/peroxydisulfate under near-neutral conditions

As a common animal feed additive, p-arsanilic acid (p-AsA) is thought to be excreted with little uptake and unchanged chemical structure, threatening the environment by potentially releasing more toxic inorganic arsenic. We herein investigated the removal of arsenic by in situ formed ferric (oxyhydr)oxides with the promotion of p-AsA degradation in Fe(II)/peroxydisulfate (PDS) system. Results showed that under acid conditions, p-AsA degraded very quickly and over 99% of p-AsA (5 μM) was degraded within 10 min at the optimal dosage of Fe(II) (100 μM) and PDS (150 μM) at pH 3, while less than 66.4% of arsenic was removed at pH 3-5. Higher pH (3-7) would inhibit the degradation of p-AsA but promote the arsenic removal. At pH 6-7, over 98.5% of total arsenic was removed, while the degradation efficiency of p-AsA was lower than 52.4%. HPLC-ICP-MS results indicated that the arsenic group was cleaved from p-AsA in the form of As(III) and then rapidly oxidized to As(V). FTIR and XPS analysis indicated that both As(V) products and residual p-AsA were bonded to ferric (oxyhydr)oxides via hydroxyl groups. Common cations (e.g., Na⁺, Ca²⁺, Mg²⁺) and anions such as Cl^-, SO₄^2-, CO₃^2- had no significant influence on arsenic removal, while SiO₃^2-, PO₄^3- and HA inhibited the removal of total arsenic, mainly by affecting the zeta potential of iron particles. In summary, the Fe(II)/PDS process, as an efficient method for partial oxidation and simultaneous adsorption of p-AsA under near-neutral conditions, is expected to control the potential environmental risks of p-AsA.

Highly efficient and acid-resistant metal-organic frameworks of MIL-101(Cr)-NH2 for Pd(II) and Pt(IV) recovery from acidic solutions: Adsorption experiments, spectroscopic analyses, and theoretical computations

Cr-based metal-organic frameworks (MOFs) of MIL-101(Cr)-NH₂ was post-synthesized from nitro-functionalized MIL-101(Cr) (MIL-101(Cr)-NO₂) through a reduction process. Adsorption behaviors and interactions of MIL-101(Cr)-NH₂ and MIL-101(Cr)-NO₂ with platinum group metal (PGM) anions of Pd(II) (PdCl₄^2-) and Pt(IV) (PtCl₆^2-), were investigated through batch adsorption experiments, spectroscopic analyses, and theoretical computations. According to adsorption kinetics and isotherms, the uptakes of Pd(II) and Pt(IV) by in MIL-101(Cr)-NH₂ were found to be much higher than their uptakes by MIL-101(Cr)-NO₂. The abundant protonated amine groups (BDC-NH₃⁺) in MIL-101(Cr)-NH₂ were verified to be the main adsorptive binding sites by XPS and FTIR spectroscopy, and FE-SEM imageries. Additionally, BDC-NH₃⁺ shows extremely high affinities (b value) and binding energies (E_bind) for PdCl₄^2- and PtCl₆^2- through electrostatic attraction, resulting in much higher adsorption capacities of MIL-101(Cr)-NH₂ for these PGMs as compared to those of MIL-101(Cr)-NO₂. Moreover, the MOFs' Cr nodes without terminal -OH indicated positive electrostatic potentials, and certain values of E_bind for PGM anions. Thus, the few-amount cationic Cr sites could also make little contributions to the adsorption of PGM anions in MIL-101(Cr)-NH₂ or MIL-101(Cr)-NO₂. Furthermore, the perfect regeneration and reusability of MIL-101(Cr)-NH₂ over five of adsorption-desorption cycles, suggesting its potential in practical applications.

Structure-Reactivity Relationships in the Adsorption and Degradation of Substituted Phenylarsonic Acids on Birnessite (δ-MnO2)

Phenylarsonic acid compounds could be oxidized by manganese oxides in surface soils, resulting in quick release of inorganic arsenic. This study investigated the structure-reactivity relationships in the adsorption and oxidative degradation of six substituted phenylarsonic acids on the surface of a major type of manganese oxides, birnessite (δ-MnO₂), using batch experiments conducted under acidic to neutral conditions. The initial adsorption rates of the substituted phenylarsonic acids on δ-MnO₂ decreased in the order of phenylarsonic acid (PAA) > 4-aminophenylarsonic acid (p-ASA) ≈ 2-aminophenylarsonic acid (2-APAA) > 4-hydroxyphenylarsonic acid (4-HPAA) > 2-nitrophenylarsonic acid (2-NPAA) > 4-hydroxy-3-nitrophenylarsonic acid (ROX), which could be attributed to steric hindrance of the substituents and the hydrophobicity of these compounds. The oxidation rates of these structural analogues by δ-MnO₂ decreased in the order of p-ASA ≈ 2-APAA > 4-HPAA > ROX, while 2-NPAA and PAA were nonreactive because of the lack of electron-donating substituents on their aromatic rings. The redox reactivity of these compounds agrees well with the electron density at C₁, which is determined by the types and position of the substituents on the aromatic ring. Although cleavage of the arsonic acid group from the aromatic ring was the predominant transformation pathway, a range of adduct products also formed through cross-coupling of the radicals and radical substitution. The contribution of radical coupling and substitution in overall degradation decreased in the order of p-ASA > 2-APAA > 4-HPAA > ROX, which results from the varying reactivity and steric hindrance of the substituents. These insights could help better understand and predict the fate of substituted phenylarsonic acids in manganese oxide-rich surface soils and the associated environmental risk of arsenic pollution.

Efficient Removal of Diclofenac from Aqueous Solution by Potassium Ferrate-Activated Porous Graphitic Biochar: Ambient Condition Influences and Adsorption Mechanism

Porous graphitic biochar was synthesized by one-step treatment biomass using potassium ferrate (K₂FeO₄) as activator for both carbonization and graphitization processes. The modified biochar (Fe@BC) was applied for the removal of diclofenac sodium (DCF) in an aqueous solution. The as-prepared material possesses a well-developed micro/mesoporous and graphitic structure, which can strengthen its adsorption capacity towards DCF. The experimental results indicated that the maximum adsorption capacity (q_max) of Fe@BC for DCF obtained from Langmuir isotherm simulation was 123.45 mg·L⁻¹ and it was a remarkable value of DCF adsorption in comparison with that of other biomass-based adsorbents previously reported. Thermodynamic quality and effect of ionic strength studies demonstrated that the adsorption was a endothermic process, and higher environmental temperatures may be more favorable for the uptake of DCF onto Fe@BC surface; however, the presence of NaCl in the solution slightly obstructed DCF adsorption. Adsorption capacity was found to be decreased with the increase of solution pH. Additionally, the possible mechanism of the DCF adsorption process on Fe@BC may involve chemical adsorption with the presence of H-bonding and π–π interaction. With high adsorption capacity and reusability, Fe@BC was found to be a promising absorbent for DCF removal from water as well as for water purification applications.