New insights into bisphenols removal by nitrogen-rich nanocarbons: Synergistic effect between adsorption and oxidative degradation

Large-size porous spherical 3D covalent organic framework for preconcentration of bisphenol F in water samples and orange juice

Large-size spherical sorbents with particle size of 10-50 μm are widely applied in separation fields, however it is still a great challenge to synthesize such large-size spherical covalent organic framework (COF). In this work, a type of large-size porous 3D COF was size-controablly synthesized via a two-step strategy, in which a large-size porous 3D spherical polymer was prepared first through a Pickering emulsion polymerization using nano silica as the stabilizer, and subsequently it was converted into porous spherical 3D COF by a solvothermal method. The as-prepared porous spherical COF (COF-320 as a model) showed size-controllable uniform spherical morphology within 15-45 μm, large specific surface area, fine crystalline structure, and good chemical stability. When used as the sorbent for dispersive solid-phase extraction (d-SPE) of bisphenol F (BPF), the porous spherical COF-320 (15 μm) displayed high adsorption capacity (Qmax = 335.6 mg/g), high enrichment factor (80 folds), and good reusability (at least five cycles). By coupling the d-SPE method to HPLC, a new analytical approach was developed and successfully applied to the determination of trace BPF in two water samples, an orange juice and a standard sample with recoveries of 96.0-102.2 % (RSD = 1.1-1.5 %), 95.7-97.4 % (RSD = 1.4-4.4 %) and 98.7 % (RSD = 2.3 %), respectively. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) were 0.1 and 0.3 ng/mL, respectively. The new synthesis strategy opens a viable way to prepare large-size porous spherical COFs, and the developed analytical method can be potentially applied to sensitively detect the trace BPF in water samples and beverages.

Two-dimensional heterojunction layered graphene oxide/graphitic carbon nitride photocatalyst for removal of toxic environmental dye methylene blue

The direct thermal polymerization techniques were applied to prepare the graphene oxide (GO)-graphitic carbon nitride (gCN) hybrid structure. The prepared hybrid heterojunction GO-gCN nanosheets were utilized as a photocatalyst to remove model pollutants methylene blue (MB) dye. The basic physio-chemical properties of GO-gCN layered materials have been analyzed by various characterization techniques. In addition, the proposed materials have a higher photocatalytic ability toward the degradation of aqueous solution of MB dye under visible light irradiation within a short treatment time. This is because it's the synergistic effects of GO-gCN layer-by-layer structures produced by π─π stacking with charge-transfer interactions. The gCN with GO composite can able to enhance the charge transfer and light-harvesting properties. Under the influence of photocatalyst, the surface of Graphene oxide undergoes the separation and combination of carbonyl radicals, hydroxyl radicals, epoxy radicals, and electron-hole pairs. This enhances the absorption of visible light and improves the degradation of MB, when GO is incorporated into gCN. The removal efficiency of MB reached up to 82.311% within the short treatment time.

Paint sludge derived activated carbon encapsulating with cobalt nanoparticles for non-radical activation of peroxymonosulfate

Industrial solid waste management and recycling are important to environmental sustainability. In this study, cobalt (Co) nanoparticles encapsulated in paint sludge-derived activated carbon (AC) were fabricated. The Co-AC possessed high conductivity, magnetic properties and abundant metal oxide impurities (TiAlSiOx), which was applied as multifunctional catalyst for peroxymonosulfate (PMS) activation. Compared to pure AC, the Co-AC exhibited significant enhanced performance for degradation of tetracycline hydrochloride (TCH) via PMS activation. Mechanism studies by in situ Raman spectroscopy, Fourier infrared spectroscopy, electrochemical analysis and electron paramagnetic resonance suggested that surface-bonded PMS (PMS*) and singlet oxygen (1O2) are the dominant reactive species for TCH oxidation. The non-radical species can efficiently oxidize electron-rich pollutants with high efficiency, which minimized the consumption of PMS and the catalyst. The removal percentages of TCH reached 97 % within 5 min and ∼ 99 % within 15 min in the Co-AC/PMS system. The Co active sites facilitated PMS adsorption to form the PMS* and the TiAlSiOx impurities provided abundant oxygen vacancy for generation of the 1O2. In addition, the Co-AC/PMS system achieved high efficiency and stability for oxidation of the target pollutants over a long-term continuous operation. This work not only offers a cost-effective approach for recycling industrial waste but also provides new insights into the application of waste-derived catalyst for environmental remediation.

Fabrication of chitin based hydrophilic hyper-crosslinked porous polymer for efficiently removing bisphenol A from water

Water pollution caused by bisphenol A (BPA) has become the world problem. Designing and preparing cost-effective and biodegradable sorbents for the effectively adsorptive removal of bisphenol A from wastewater is of immense significance. Herein, a natural polysaccharide (chitin) was used as raw materials to be grafted with styrene (GS), then crosslinked with α,α'-dichloro-p-xylene (DCX) to form the hyper-crosslinked polymer (labeled as CGS@DCX). The CGS@DCX showed high adsorptive affinity for bisphenol A, with adsorption capacity of 441 mg g-1. Various studies gave an insight into the adsorption process, demonstrating that the highly efficient adsorption of BPA by the CGS@DCX is mainly based on the π-π stacking, hydrogen-bond interaction, polar interaction and pore adsorption. Moreover, the CGS@DCX had high chemical stability, good reusability (9 cycles) and fast adsorption kinetics (10 min) for adsorption of BPA. This work provides a promising strategy for the design and synthesis of novel yet eco-friendly sorbents to solve environmental problems.

Enhanced electron-transfer for peroxymonosulfate activation by Ni single sites adjacent to Ni nanoparticles

Oriented generation of specific reactive oxygen species (ROS) has been challenging in peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs). In this work, we constructed a multifunctional catalyst composed of Ni NPs embedded in N-doped carbon nanotubes (NCNTs) with exposed Ni single-atom sites (Ni-NCNTs). The Ni-N4 single sites adjacent to the Ni NPs are more efficient for PMS adsorption and activation, resulting in enhanced production of singlet oxygen (1O2). More interesting, we demonstrated that the superoxide anion radical (O2•-) was generated from 1O2 reduction via the electron transfer from the graphitic-N sites of Ni-NCNTs rather than from O2 reduction or PMS decomposition as reported in previous studies. Thus, Ni-NCNTs can act as both electron acceptor and donor to trigger the cascade production of 1O2 and O2•-, respectively, leading to fast and selective degradation of aqueous organic pollutants. The graphitic-N adjacent to the aromatic π-conjugation of NCNTs facilitated chemisorption of 1O2 onto NCNTs via the strong π*-π interactions, and more importantly, donated the lone pair electrons to trigger the reduction of 1O2 to O2•-. This study unravels the mechanisms for enhanced production of ROS in the nanoconfined Fenton-like systems and shed new light on the application of multifunctional nanocatalyst for rapid wastewater decontamination.

Fulvic acid enhanced peroxymonosulfate activation over Co-Fe binary metals for efficient degradation of emerging bisphenols

Bisphenol F (BPF) and bisphenol S (BPS) are emerging bisphenols, which have become the main substitutes for bisphenol A (BPA) in industrial production and are also considered as new environmental pollution challenges. Thus, the necessity for an effective approach to remove BPF and BPS is essential. In this study, fulvic acid (FA) was used to modify Co-Fe binary metals (CFO) for peroxymonosulfate (PMS) activation. The characterization results demonstrated that CFO changed significantly in morphology after compounding with FA, with smaller particle size and 5.6 times larger specific surface area, greatly increasing the active sites of catalyst; Moreover, humic acid-like compounds increased the surface functional groups of CFO, especially phenolic hydroxyl, which could effectively prolong the PMS activation. The concentration of all reactive species, such as SO₄•^-, •OH, O₂•^-, and ¹O₂ increased in FA@CFO/PMS system. As a result, the degradation efficiency of CFO for both BPF and BPS was significantly improved after compounding FA, which also had a wide range of pH applications. The degradation pathways of both BPF and BPS were proposed based on liquid chromatography-mass spectrometry (LC-MS) analysis and the density functional theory (DFT) calculations. Our findings are expected to provide new strategies and methods for remediation of environmental pollution caused by emerging bisphenols.

Efficient recovery of bisphenol A from aqueous solution using K2CO3 activated carbon derived from starch-based polyurethane

Endocrine-disrupting compounds (EDCs) are increasingly polluting water, making it of practical value to develop novel desirable adsorbents for removing these pollutants from wastewater. Here, a simple cross-linking strategy combined with gentle chemical activation was demonstrated to prepare starch polyurethane-activated carbon (STPU-AC) for adsorbing BPA in water. The adsorbents were characterized by various techniques such as FTIR, XPS, Raman, BET, SEM, and zeta potential, and their adsorption properties were investigated comprehensively. Results show that STPU-AC possesses a large surface area (1862.55 m²·g^-1) and an abundance of functional groups, which exhibited superior adsorption capacity for BPA (543.4 mg·g^-1) and favorable regenerative abilities. The adsorption of BPA by STPU-AC follows a pseudo-second-order kinetic model and a Freundlich isotherm model. The effect of aqueous solution chemistry (pH and ionic strength) and the presence of other contaminants (phenol, heavy metals, and dyes) on BPA adsorption was also analyzed. Moreover, theoretical studies further demonstrate that hydroxyl oxygen and pyrrole nitrogen are the primary adsorption sites. We found that the efficient recovery of BPA was associated with pore filling, hydrogen-bonding interaction, hydrophobic effects, and π-π stacking. These findings demonstrate the promising practical application of STPU-AC and provide a basis for the rational design of starch-derived porous carbon.

"Two-in-one" sulfur and nitrogen co-doped fluorescent silicon nanoparticles: Simultaneous as the fluorescent probe and photocatalyst for in-situ real time visual monitoring and degradation of tetracycline antibiotics

Detection and removal of contaminants are significant for environmental monitoring and remediation. In the present study, "two-in-one" silicon nanoparticles (SiNPs) were designed and prepared to simultaneously act as the fluorescent probe and degradation catalyst to detect and remove tetracycline (TCs) antibiotics. Thiourea and 3-aminopropyltrimethoxysilane were dopant and silicon source to generate fluorescent sulfur and nitrogen co-doped SiNPs (SN-SiNPs). The blue fluorescence of SN-SiNPs was selectively quenched by TCs due to the inner filter effect, whilst accompanied by the newly appeared yellow-green fluorescence resulting from aggregation induced fluorescence emission effect. Based on this phenomenon, SN-SiNPs can be used as fluorescent colorimetric probes for detection of doxycycline, oxytetracycline and tetracycline with limits of detection of 1.8 μg/L, 3.0 μg/L and 4.2 μg/L, respectively; the semi-quantitation can even be visually achieved by naked eyes. Particularly, SN-SiNPs were capable to catalyze the degradation of the three TCs effectively, achieving the removal rates of doxycycline, oxytetracycline and tetracycline of >90 %, >80 % and > 70 % after 240 min exposure to UV light. The catalytic ability of SN-SiNPs was derived from hydroxyl radical (•OH^-), superoxide radical (•O₂^-) and singlet oxygen (¹O₂) produced by SN-SiNPs under UV irradiation. Moreover, integrating the fluorescent probe and photocatalyst together, the proposed SN-SiNPs simultaneously realized catalyzing the degradation of the three TCs and in-situ visually monitoring of the degradation process in real time. This study innovatively proposed an integrated probe for the detection and catalytic degradation of TCs, providing a new "two-in-one" strategy for rapid and simple detection and removal of drug pollutants.

Nitrogen-rich triazine-based porous polymers for efficient removal of bisphenol micropollutants

Achieving both rapid adsorption rate and high adsorption capacity for bisphenol micropollutants from aquatic systems is critical for efficient adsorbents in water remediation. Here, we elaborately prepared three nitrogen-rich triazine-based porous polymers (NTPs) with similar geometric configurations and nitrogen contents (41.70-44.18 wt%) while tunable BET surface areas and micropore volumes in the range of 454.7-536.3 m² g^-1 and 0.20-0.84 cm³ g^-1, respectively. It was systematically revealed that the synergy of hydrogen bonding, π-π electron-donor-acceptor interaction, and micropore preservation promoted the rapid (within 5 min) and high capacity adsorption of bisphenols by NTPs. Particularly, microporous-dominated NTPs-3 with the highest micro-pore volume (0.84 cm³ g^-1) displays remarkable adsorption capacity towards bisphenol A as evidenced by the adsorption capacity of 182.23 mg g^-1. A simple column filter constructed by NTPs-3 also expressed good dynamic adsorption and regeneration capacity. This work provided new insight into the rational design and engineering of nitrogen-rich porous polymers for the remediation of micropollutant wastewater.

Ring defects-rich and pyridinic N-doped graphene aerogel as floating adsorbent for efficient removal of tetracycline: Evidence from NEXAFS measurements and theoretical calculations

The rational design of carbon-based adsorbents with a high uptake efficiency for polar organic molecules is a key challenge in water purification research. Herein, we report a graphene aerogel that is doped with pyridinic-N and has abundant ring defects (denoted by DNGA). The aerogel sample exhibits a high adsorption capacity of 607.1 mg/g toward tetracycline (TC), a fast adsorption process (20 min), and good reusability (with a declining efficiency < 10.0% after five cycles), while being easy to recycle. C/N K-edge X-ray absorption near-edge structure (XANES) measurements demonstrate that the efficient adsorption capacity of the DNGA sample is related to the presence of ring defects and the pyridinic-N species. Density functional theory (DFT) calculations demonstrate that ring defects of type 5-8-5 and the pyridinic-N species at the edge location are primarily responsible for TC removal. In this study, we resolve a controversial issue regarding the origin of the adsorption performance origin of N-doped carbon-based adsorbents. The findings of this study can guide the development of novel and improved N-doped carbon-based adsorbents for the removal of target contaminants.

Activation of peracetic acid via Co3O4 with double-layered hollow structures for the highly efficient removal of sulfonamides: Kinetics insights and assessment of practical applications

Sulfonamides (SAs) have been of ecotoxicological concern for ambient ecosystems due to their widespread application in the veterinary industry. Herein, we developed a powerful advanced oxidation peracetic acid (PAA) activation process for the remediation of SAs by Co₃O₄ with double-layered hollow structures (Co₃O₄ DLHSs). Systematic characterization results revealed that the polyporous hollow hierarchical structure endows Co₃O₄ DLHSs with abundant active reaction sites and enhanced mass transfer rate, which were conducive for improving the PAA activation efficiency. Laser flash photolysis experiment and mechanism studies indicated that organic radical species were dominant reactive species for SAs removal. The present system is also highly effective under natural water matrices and trace SAs concentration (20 μg/L) condition. More importantly, the chlorella acute toxicity of the SAs solution was eliminated during mineralization process, supporting this catalytic system may be efficaciously applied for the remediation of SAs contamination in ambient waterways.

Insights into the role of dual reaction sites for single Ni atom Fenton-like catalyst towards degradation of various organic contaminants

The trade-off of Fenton-like catalysts in activity and stability remains a challenge in practical remediation applications. In this work, we successfully synthesized an efficient and stable catalyst comprised of single nickel (Ni) atoms dispersed on N-doped porous carbon (named Ni-SAs@CN) through a simple micropore confinement strategy. The catalyst exhibited outstanding catalytic performance with 25.8 min^-1 turnover frequency for peroxymonosulfate (PMS) activation toward degradation of various organic pollutants (e.g., antibiotics, dyes, and plasticizers) in a wide pH range (4.5-10.8). Electron paramagnetic resonance and in situ Raman analyses demonstrated that both radical (including SO₄^•- and ^•OH) and Ni-PMS* dominated nonradical (via electron transfer) pathways played pivotal role in the decomposition of organics. The X-ray adsorption fine structure analysis and computational pieces of evidence demonstrate that the atomically dispersed NiN₄ coordination is the intrinsic catalytic site for PMS activation. Meanwhile, pyrrolic N acts as a functional site to anchor target contaminants to the surface region for oxidation. In this process which is benefited from the dual active sites, the target contaminants were degraded via combined radical and nonradical pathways, which significantly boost the overall oxidation and mineralization kinetics.

Photoassisted highly efficient activation of persulfate over a single-atom Cu catalyst for tetracycline degradation: Process and mechanism

A single-atomic-site Cu catalyst (SAS-Cu) supported on carbon nitride (CN) material was synthesized by a pyrolyzing coordinated polymer (PCP) strategy. The introduction of a single-atomic Cu site improved the charge transfer and separation efficiency. The reaction rate constant of SAS-Cu_1.0 is 4.5 times higher than that of CN. Under the condition of only 0.1 mM sodium persulfate (PS) and 0.1 g/L catalyst, the removal rate of tetracycline (TC) reached 82.5% after 30 min of LED illumination, which greatly improved the utilization of oxidant. Mechanistic analysis shows that there are free radical (•O₂^-, SO₄•^-, •OH) and nonradical pathways (¹O₂ and direct electron transfer) in the system, and they have synergistic effect. Density functional theory (DFT) calculations show that SAS-Cu_1.0 can optimize the adsorption and activation of PS. This work illustrates the application value of SAC combined with activated persulfate and the low energy consumption of the LED light in the field of environment, which provides a new strategy for reducing the salinity and treatment cost of treated water.

Design and preparation of functional azo linked polymers for the adsorptive removal of bisphenol A from water: Performance and analysis of the mechanism

In order to effectively remove refractory bisphenol A (BPA) from water, a novel nitrogen doped organic porous functional azo linked polymer (ALP-p) was designed and prepared according to the physicochemical characteristics of propane linked to two phenol hydroxyl groups. This ALP-p was synthesized with 98.5% yield, from pararosaniline and phloroglucinol, via the diazo coupling reaction to produce multiple adsorption functional groups of benzene ring, hydroxyl group and azo group. This functional material showed high adsorption capacity of 357.8 mg/g for 50 mg/L BPA, at 20 °C. The adsorption kinetics and isotherms were described by the pseudo-second-order and Langmuir model, respectively. The major adsorption mechanisms were attributed to the high specific surface area (259.8 m²/g) and pore volume (0.56 cm³/g) related surface adsorption and pore diffusion through porous stereoscopic stacking cavity anchorage. The functional group from the three-dimensional skeleton structures of ALP-p for BPA anchoring endowed chemisorption via π-π interaction between benzene rings and hydrogen-bonding (O-H⋯O, C-H⋯N, C-H⋯O and C-H⋯C) with the hydrogen atom of benzene ring, -OH from BPA and -OH, NN from ALP-p, respectively. The coexisting organic pollutants and alkali environment posed a negative effect on adsorption, while salinity had no significant effect on the process. The adsorption capacity and recovery of ALP-p were >93.5% and 81.6% after five cycles of operation.

Polydopamine-Modified Cellulose Nanofibril Composite Aerogel: An Effective Dye Adsorbent

In this study, a new cellulose nanofibril (CNF) composite aerogel was fabricated using a green and facile mussel-inspired coating strategy. First, the CNF hydrogel was crosslinked by calcium ion followed by immersion in dopamine solution. Second, the surface of CNF was modified using polydopamine (PDA) to obtain PDA@CNF (PCNF) composite aerogel. The PCNF composite aerogels had large surface areas (368.15 m²/g) and low bulk density (27.2 mg/cm³). The composite aerogel exhibited improved mechanical properties, which were almost three times compared with those of CNF aerogel. Moreover, PCNF composite aerogel had good resilience under a wet state. The PDA functional layer remarkably enhanced the adsorption capacities of the composite aerogel for methylene blue (MB). The maximum adsorption of MB was 208 mg/g at an initial dye concentration of 50 mg/L. The adsorption isotherm and kinetic behaviors of the composite aerogel were consistent with Langmuir and pseudo-second-order models. In addition, the PCNF composite aerogels had a high adsorption capacity over a wide pH range. The reuse experiment showed that the removal efficiency of the composite aerogel remained higher than 85% after five cycles. Therefore, PCNF composite aerogels may have potential application in wastewater treatment due to its environmental sustainability and low energy consumption.

Toward Selective Oxidation of Contaminants in Aqueous Systems

The presence of diverse pollutants in water has been threating human health and aquatic ecosystems on a global scale. For more than a century, chemical oxidation using strongly oxidizing species was one of the most effective technologies to destruct pollutants and to ensure a safe and clean water supply. However, the removal of increasing amount of pollutants with higher structural complexity, especially the emerging micropollutants with trace concentrations in the complicated water matrix, requires excessive dosage of oxidant and/or energy input, resulting in a low cost-effectiveness and possible secondary pollution. Consequently, it is of practical significance but scientifically challenging to achieve selective oxidation of pollutants of interest for water decontamination. Currently, there are a variety of examples concerning selective oxidation of pollutants in aqueous systems. However, a systematic understanding of the relationship between the origin of selectivity and its applicable water treatment scenarios, as well as the rational design of catalyst for selective catalytic oxidation, is still lacking. In this critical review, we summarize the state-of-the-art selective oxidation strategies in water decontamination and probe the origins of selectivity, that is, the selectivity resulting from the reactivity of either oxidants or target pollutants, the selectivity arising from the accessibility of pollutants to oxidants via adsorption and size exclusion, as well as the selectivity due to the interfacial electron transfer process and enzymatic oxidation. Finally, the challenges and perspectives are briefly outlined to stimulate future discussion and interest on selective oxidation for water decontamination, particularly toward application in real scenarios.

The role of solvents and oxygen-containing functional groups on the adsorption of Bisphenol A on carbon nanotubes

The wide application of endocrine disruptors (EDs) has recently created great public concerns because of their toxicities. Previous studies have stated that the effect of oxygen-containing functional groups of carbon nanotubes (CNTs) for Bisphenol A (BPA) sorption, but no study has been quantified the exact contribution of the oxygen-containing functional groups. Moreover, the role of solvents on the adsorption of BPA should be considered. Considering the well properties of CNTs, graphitized (MG), carboxylated (MC) and hydroxylated (MH) multi-walled CNTs were selected as model adsorbents, BPA was used as model adsorbate. Solubility and single point adsorption coefficient (logK_d) of BPA were n-hexadecane > water > methanol, suggesting that hydrophobic interaction was the main mechanism for BPA sorption on CNTs. For different functional groups of CNTs, π-π interaction between MH and BPA may be stronger than that of MC, and thus the sorption of BPA on MH was higher than that of MC. Moreover, hydrogen bond resulted in the higher adsorption of BPA on MH when compared with MC. The oxygen-containing functional groups of CNTs played a key role for BPA sorption in methanol because the values of contribution were 20%-45% for -OH and were 5%-25% for -COOH. In n-hexadecane, other factors such as hydrophobic interactions should be considered because the contribution percentages of -OH were ca.15% and the values for -COOH were ca.10%. The results are expected to provide important information on the interaction of EDs and CNTs.

Biomass-derived N/S dual-doped hierarchically porous carbon material as effective adsorbent for the removal of bisphenol F and bisphenol S

Biomass-derived heteroatom-doped porous carbon-based materials are emerging as low-cost adsorbents for removing common pollutants, although the adsorption performance is still unsatisfactory and the main adsorption mechanisms are still controversial. Herein, we report a facile and general method for fabricating biomass-derived N/S dual-doped hierarchically porous carbon adsorbent (MZ-NSPC). The MZ-NSPC material exhibits excellent adsorption capacity (295.8 mg/g for bisphenol F (BPF), 308.7 mg/g for bisphenol S (BPS)), short equilibrium time (30 min), and good reusability (the decline efficiency < 6.15% after five times). The remarkable adsorption performance originates from a large BET surface area, hierarchically porous structure, and N/S heteroatoms dual-doping. Combined with comparative experiments and density functional theory (DFT) calculations, we revealed that the doped N, S heteroatoms played a synergistic effect which promoted the adsorption performance and adsorption sites are mainly the oxidized-S and pyridinic-N. Importantly, for BPF, the proportion contribution of different mechanisms followed the order of hydrophobic interaction > π-π interaction > hydrogen bonding interaction. However, adsorption mechanism of BPS was mainly controlled by π-π interaction. This work not only promotes the development of low-cost and sustainable heteroatom-doped carbon-based materials, but also systematically studies adsorption mechanism of heteroatom-doped carbon-based materials for bisphenols.

Hollow-structured amorphous prussian blue decorated on graphitic carbon nitride for photo-assisted activation of peroxymonosulfate

Heterogeneous activation of peroxymonosulfate (PMS) is one of the most promising techniques for wastewater treatment. Herein, an ingenious system by coupling of photocatalysis and PMS activation was developed, using hollow-structured amorphous prussian blue (A-PB) decorated on graphitic carbon nitride (g-C₃N₄) as the catalyst. Degradation of bisphenol A (BPA) via the A-PB-g-C₃N₄ mediated PMS activation under visible light (Vis) was systematically investigated. Astonishingly, it was found that ~ 82.0%, 92.6%, 98.2% and 99.3% of BPA (40 mg/L) were removed within 2, 4, 6 and 7 min, respectively, suggesting the extremely strong oxidizing capacity of the A-PB-g-C₃N₄/PMS/Vis system. Synergistic effect between the decorated A-PB and the g-C₃N₄ substrate promoted the Fe(III)/Fe(II) redox cycling and facilitated the charge transfer at the A-PB/g-C₃N₄ heterojunction interface. As a result, both photocatalysis and heterogeneous activation of PMS were boosted in the A-PB-g-C₃N₄/PMS/Vis system, leading to the production of large amount of reactive oxygen species (ROS). The various ROS (SO₄^•-, HO•, •O₂^- and ¹O₂) was responsible for the ultrafast degradation of BPA. Moreover, the A-PB-g-C₃N₄ catalyst also exhibited outstanding reusability and stability, retaining 98.9% of the removal percentage for BPA after five consecutive reaction cycles. This study suggests that the A-PB-g-C₃N₄ can be an all-rounder to bridge photocatalysis and PMS activation, and shed a new light on the application of multiple ROS for the ultrafast elimination of micropollutants from wastewater.

Heteroporous 3D covalent organic framework-based magnetic nanospheres for sensitive detection of bisphenol A

Covalent organic frameworks (COFs) showed great promise in effective adsorption of target molecule via size selectivity. Although various magnetic 2D COFs composites have been studied and exhibited the intensive applications, the incorporation of 3D COFs and magnetic nanoparticles to form a new class of magnetic adsorbents with enhanced function still has no reports. Herein, a novel Fe₃O₄@3D COF with heteroporous structure matching to the sizes of bisphenol A (BPA) was firstly synthesized for better adsorption of BPA than common magnetic 2D-COFs. Three Fe₃O₄@3D COFs nanospheres were synthesized under the solvothermal conditions in autoclave, and the optimum Fe₃O₄@3D-COF denoted as Fe₃O₄@COF-TpTAM (Tp, 1,3,5-triformylphloroglucinol; TAM, tetra(p-aminophenyl)-methane) was selected and employed. Detailed characteristics of Fe₃O₄@COF-TpTAM were evaluated via various techniques including TEM, FTIR, TGA, XRD and BET. Excellent chemical and thermal stability, high surface area (294.6 m² g^-1) and pore volume (0.2 m³ g^-1) with multiple pore sizes comparable with the simulated three-dimensional sizes of BPA were exhibited. A high adsorption capacity of BPA up to 209.9 mg/g that was better than common 2D-COFs was achieved, and the sensitive MSPE-LC-MS method with wide linear range (10-5000 pg/mL), low detection limit (4 pg/mL, S/N = 3) was built. Satisfactory recoveries of BPA as 93.8 ± 1.4%-101.4 ± 5.1% (n = 3) and 100.4 ± 1.9% ~ 107.3 ± 1.2% (n = 3) were obtained in milk and river water samples, respectively. This work demonstrates the promising application of Fe₃O₄@3D COF as efficient adsorbents of trace BPA, and opens up a new access for the efficient MSPE in sample pretreatment for food or environmental safety analysis.

Remarkable adsorbent for removal of bisphenol A and S from water: Porous carbon derived from melamine/polyaniline

Recently, contamination of water resources with various organics such as bisphenols is a problem worldwide. Here, we developed nitrogen-enriched porous carbons (N-PDCs) from pyrolysis of melamine-loaded polyaniline (PANI), for the first time. The N-PDCs and PANI-derived carbons (PDCs, without using melamine) were characterized and applied in adsorptive removal of two typical bisphenols, such as bisphenol A and S (BPA and BPS, respectively), from water under a wide range of conditions. Via this research, we found that one N-PDC (N-PDC-700, obtained at 700 °C) showed very remarkable performances in adsorption of BPA (Q₀: 961 mg/g) and BPS (Q₀: 971 mg/g) under pH of 7.0. In other words, N-PDC-700 has Q₀ value for BPS around 2 times as much as that of the most effective adsorbent, MIL-101-NH₂. Moreover, the Q₀ value of N-PDC-700 for BPA is the second highest, after the sp² C dominant N-doped carbon. The plausible adsorption mechanism could be suggested based on the adsorption of BPA under a wide range of pH values. Finally, the N-PDC-700 was easily recycled for several uses, suggesting the potential application in adsorption of bisphenols from water.

Mechanistic understanding of highly selective adsorption of bisphenols on microporous-dominated nitrogen-doped framework carbon

Producing a desirable adsorbent for removing endocrine disrupting compounds (EDCs) from aqueous solutions remains a major challenge. In this work, microporous-dominated nitrogen-doped framework carbons (MNFCs, s means the calcination temperature) with high specific surface area, ultra-microporous structure, and high nitrogen-doping can be obtained by a direct calcination of ethylene diamine tetraacetic acid tetrasodium (EDTA-4Na) without aid of any catalyst and nitrogen source. MNFCs were applied adsorbents to remove bisphenols from aqueous solution. Batch experiments showed MNFC-750 had a large adsorption capacity for bisphenols from aqueous solutions (409 mg/g for bisphenol A, 364 mg/g for bisphenol F, and 521 mg/g for bisphenol S) along with short equilibrium time (30 min), and good stability and reusability. Using multiple characterizations and comparative experiments along with theoretical calculations, we discovered that: (1) nitrogen-doping can significantly boost the adsorption capacity; (2) adsorption sites are mainly the pyridinic-N instead of pyrrolic-N and graphitic-N; and (3) the adsorption mechanisms were mainly driven by Lewis acid-base interaction, hydrophobic interaction, π-π interaction and hydrogen bond interaction. These findings indicate that MNFCs present a promising potential for practical applications and shed light on the rational design of nitrogen doped carbon-based adsorbents for efficient pollutant removal.

Cobalt ferrite nanoparticle-loaded nitrogen-doped carbon sponge as a magnetic 3D heterogeneous catalyst for monopersulfate-based oxidation of salicylic acid

As salicylic acid (SAL) is increasingly consumed as a pharmaceutical product, release of SAL into the environment poses threats to ecology because of its low bio-degradability. Thus, SO₄^•--based chemical oxidation processes have been proposed for degrading SAL. Since monopersulfate (MPS) represents a primary reagent for generating SO₄^•-, and Co is the most capable metal for activating MPS to generate SO₄^•-, C₃O₄ NPs are frequently proposed for activating MPS but they are difficult to recover from water. Thus CoFe₂O₄ is considered as a magnetic alternative to Co₃O₄, and loading of CoFe₂O₄ NPs on substrates could further improve dispersion and avoid aggregation of NPs. Therefore, this study proposes a 3-Dimensional (3D) hierarchical catalyst which is fabricated by loading CoFe₂O₄ NPs on nitrogen-doped carbon sponge (NCS). The NCS is not only adopted as a support for CoFe₂O₄ NPs but also provides additional catalytic sites and enhances catalytic activities of CoFe₂O₄ NPs for MPS activation. As a result, CoFe₂O₄ NPs loaded on NCS (CFNCS) exhibits substantially higher catalytic activities than CoFe₂O₄ NPs and NCS individually with 100% of SAL could be afforded within 30 min. E_a of SAL degradation of 47.4 kJ/mol by CFNCS-activated MPS is also lower than those by other reported catalysts, whereas the RSE was 11.1%, which was also much higher than most of reported values. These features demonstrate that CFNCS is a promising 3D catalyst for enhancing MPS activation to degrade SAL. The findings obtained here are also insightful to develop efficient MPS-activating catalysts for eliminating contaminants.

Electron-transfer-dominated non-radical activation of peroxydisulfate for efficient removal of chlorophenol contaminants by one-pot synthesized nitrogen and sulfur codoped mesoporous carbon

Synergistic adsorption and oxidative degradation (via persulfate activation) on metal-free carbonaceous materials are expected to be environmentally friendly and highly efficient approach toward contaminants removal. Herein, nitrogen and sulfur codoped mesoporous carbon (NSDMC) were firstly synthesized via co-carbonization of calcium citrate and thiourea without any templates. NSDMC samples exhibit remarkably enhanced adsorption capacity and oxidative degradation (by activating PDS) for chlorophenols elimination. Increased S_BET and introduced N-containing functional groups are beneficial for chlorophenols adsorption, PDS accessibility and successive activation. Doped sulfur species (especially for thiophenic S) can enhance the electron-transport performance of NSDMC, further promoting PDS activation and chlorophenols degradation. It can be ascribed to the synergistic effect of N and S codoping. NSDMC-30 (containing 5.83 at.% nitrogen and 2.15 at.% sulfur, and possessing S_BET of 1935.9 m² g^-1) exhibits the optimal adsorption and catalytic oxidation capability for 4-CP removal. Degradation rate constant of NSDMC-30 is 0.125 min^-1, which is 3.0 times and 7.8 times higher than nitrogen-doped MC and pristine MC, respectively. Radicals quenching experiments and EPR tests demonstrate that non-radical pathways play dominant role for PDS activation and chlorophenols degradation. Based on the influences of catalyst loading, initial 4-CP concentration, and PDS dosage on degradation kinetics of 4-CP, the pre-adsorption is unveiled to be the critical step determining oxidation rate of chlorophenols. More importantly, the results of in-situ Raman and electrochemical tests show that the surface-confined and activated PDS complex (carbon-PDS*) and continuous electron transfer from co-adsorbed 4-CP are mainly responsible for the oxidative degradation of chlorophenols. The intermediate products and TOC removal indicate that chlorophenols can be efficiently degraded and mineralized by as-synthesized NSDMC via activating PDS. Besides, the present NSDMC/PDS system is also applicable for purification of actual polluted water samples. This work provides in-depth knowledge of carbon-driven nonradical process for PDS activation and contaminants remediation.

Urgently reveal longly hidden toxicant in a familiar fabrication process of biomass-derived environment carbon material

Biomass-derived N-doped carbon (BNC) is an important environmental material and widely used in the fields of water purification and soil remediation. However, the toxicant in the commonly used synthesis process of BNC materials have been largely ignored. Herein, we firstly report the presence of a highly toxic by-product (KCN) in the activation process of BNC materials consequential of the carbothermal reduction reaction. Because this carbothermal reduction reaction also regulates the N-doping and pore development of BNC materials, the KCN content directly relates with the properties of BNC material properties. Accordingly, a high KCN content (∽ 611 mg) can occur in the production process of per g BNC material with high specific surface area (∽ 3600 m²/g). Because the application performance of BNC material is determined by the surface area and available N doping, therefore, production of a BNC material with high performance entails high risk. Undoubtedly, this study proves a completely new risk recognition on a familiar synthesis process of biomass-based material. And, strict protective device should be taken in fabrication process of biomass-derived carbon material.

Fabrication and Adsorption Optimization of Novel Magnetic Core-shell Chitosan/Graphene Oxide/β-cyclodextrin Composite Materials for Bisphenols in Aqueous Solutions

A novel magnetic composite material, Fe3O4@SiO2/chitosan/graphene oxide/β-cyclodextrin (MCGC), was prepared by multi-step methods. Various methods were used to systematically characterize the morphology, composition, structure, and magnetic properties of MCGC. The results obtained show that the composite material has good morphology and crystal structure and can be separated quickly by an external magnetic field. The operation is relatively easy, and the raw materials used to prepare this material are economical, easy to obtain, and environmentally friendly. The performance and adsorption mechanism for using this material as an adsorbent to remove bisphenol A (BPA) and bisphenol F (BPF) from water were studied. The adsorption parameters were optimized. Under optimal conditions, MCGC was found to remove more than 90% of BPA and BPF in a mixed solution (20 mg/L, 50 mL); the adsorption process for BPA and BPF on MCGC was found to follow a Redlich-Peterson isotherm model and Pseudo-second-order kinetic model. The adsorption mechanism for MCGC may involve a combination of various forces. Recycling experiments showed that after five uses, MCGC retained a more than 80% removal effect for BPA and BPF, and through real sample verification, MCGC can be used for wastewater treatment. Therefore, MCGC is economical, environmentally friendly, and easy to separate and collect, and has suitable stability and broad application prospects.

ZSM-5-(C@Fe) activated peroxymonosulfate for effectively degrading ciprofloxacin: In-depth analysis of degradation mode and degradation path

In this work, ZSM-5-(C@Fe), as a peroxymonosulfate (PMS) heterogeneous activator, was synthesized, characterized, and evaluated for activating PMS to degrade ciprofloxacin (CIP) in wastewater. Zeolite Socony Mobil-5 (ZSM-5) was utilized to enhance structural stability and provided a scaffold to graft Fe doping C nanocomposites activator. Pyrolytic metal-organic frameworks (MOFs) can use crystal structure to construct stable carbon-encapsulated Fe nanocomposites. The formation of C-O-Si, C-O-Al and C-Fe was the key to the stability of catalysts. Fe doping in ZSM-5-(C@Fe) formed non-radical degradation pathway was the key to improve the degradation efficiency. The experimental data indicated ZSM-5-(C@Fe) could completely remove 20 mg L^-1 CIP within 15 min and achieve good results in the experiments of treating actual wastewater, which could reduce 40% COD of the paper mill aerobic pond effluent. The Fukui function calculation and UHPL C-H RMS/MS analysis elucidated that the ¹O₂-dominated electrophilic reaction and the ZSM-5-(C@Fe) complex PMS-dominated nucleophilic reaction were the main pathways for CIP degradation and the radical degradation pathway (·OH and SO₄^-˙) plays auxiliary role. In addition, two new degradation pathways of the N29 and C27 in quinolone ring and the N22 in piperazine ring were discovered. This finding had important implications for the removal of N from organic pollutants.

Aggregation-induced photocatalytic activity and efficient photocatalytic hydrogen evolution of amphiphilic rhodamines in water

The development of photocatalysts is an essential task for clean energy generation and establishing a sustainable society. This paper describes the aggregation-induced photocatalytic activity (AI-PCA) of amphiphilic rhodamines and photocatalytic functions of the supramolecular assemblies. The supramolecular assemblies consisting of amphiphilic rhodamines with octadecyl alkyl chains exhibited significant photocatalytic activity under visible light irradiation in water, while the corresponding monomeric rhodamines did not exhibit photocatalytic activity. The studies on the photocatalytic mechanism by spectroscopic and microscopic analyses clearly demonstrated the AI-PCA of the rhodamines. Moreover, the supramolecular assemblies of the rhodamines exhibited excellent photocatalytic hydrogen evolution rates (up to 5.9 mmol g-1 h-1).

Removal of antibiotic resistant microbes by Fe(II)-activated persulfate oxidation

Sewage in WWTPs is one of main way to spread antibiotic resistant microbes (ARMs), and beach bay water is in direct contact with human skin. It is necessary to pay attention to remove the ARMs in WWTP sewage and bay water. Our results showed that ARMs and total microbes (TMs) can be effectively removed by S₂O₈^2-/Fe²⁺ in the effluent stage of WWTPs and bay water. Quenching experiments using tert-butyl alcohol, dimethyl sulfoxide and Al₂O₃ as scavengers confirmed that the primary reactive oxidants responsible for microbes removal during the Fe(II)-activated persulfate oxidation process might be SO₄^•- and Fe(IV), rather than •OH. The bacterial community shifted and the alpha diversity significantly reduced after treatment. In WWTP group, relative abundance of Firmicutes increased to 8.56%, and potential pathogens such as genus Vibrio decreased to 0.03% in bay water after treatment. The ecological toxicity to the environment of S₂O₈^2-/Fe²⁺ further illustrated that the mortality of indicator species Oryzias latipes did not increase after treatment, and the dosage of 60/30 μM can be potentially ideal dosage of S₂O₈^2-/Fe²⁺. This study revealed Fe(II)-activated persulfate oxidation as an eco-friendly and economical method could reduce TMs and ARMs in WWTP sewage and bay water.

Efficient Removal of Bisphenol A Using Nitrogen-Doped Graphene-Like Plates from Green Petroleum Coke

Green petroleum coke, a form of industrial waste produced in the oil-refining process, was used to synthesize nitrogen-doped graphene-like plates (N-GLPs) together with melamine. In this study, characterization and batch experiments were performed to elucidate the interaction mechanism of N-GLPs and bisphenol A (BPA). Structural analysis of N-GLPs, including scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS), showed an obvious graphene-like structure and successful nitrogen doping. In addition, compared with 8.0 m2/g for green petroleum coke, the BET surface area of N-GLPs markedly increased to 96.6 m2/g. The influences of various factors, including contact time, temperature, and initial pH on BPA removal efficiency were investigated. It was found that 92.0% of BPA was successfully removed by N-GLPs at 50 °C. Based on the adsorption experiments, it was shown that electrostatic attraction, hydrogen bonding, and π-π interaction enhanced the adsorption capacity of N-GLPs for BPA. According to the thermodynamic data, the adsorption process was spontaneous, physical, and endothermic in nature. Therefore, N-GLPs are efficient adsorbent material to remove BPA from wastewater.

CNT-sorbents for heavy metals: Electrochemical regeneration and closed-loop recycling

Heavy metal contamination of aquatic environments is a major concern. Carbon nanotubes (CNTs) are among the most effective adsorbents for heavy metal removal due. However, their high cost and their uncertain environmental impact necessitates a closed-loop process through sorbent regeneration and recycling for practical application. Our work demonstrates heavy metal adsorption by carboxylic acid-functionalized single-walled/double-walled carbon nanotubes (f-SW/DWCNTs) and their regeneration using electric fields. We follow a multi-step process: 1) copper in an aqueous solution is adsorbed onto the surface of f-SW/DWCNTs, 2) the copper-saturated f-SW/DWCNTs are filtered onto a microfiltration (MF) membrane, 3) the f-SW/DWCNT coated membrane is used as an anode in an electrochemical cell, 4) an applied electric field desorbs the metals from the CNTs into a concentrated waste, and 5) the CNTs are separated from the membrane, re-dispersed and reused in copper-contaminated water for successive adsorption. With an applied positive electric potential, we achieved ∼90 % desorption of Cu from f-SW/DWCNTs. We hypothesize that the electric field generated at the anode causes electrostatic repulsion between the anode and the electrostatically adsorbed heavy metal ions. The effect of applied voltages, electrode spacing and electrolyte conductivity on the desorption of Cu from CNTs was also investigated.

Highly nitrogen-doped porous carbon transformed from graphitic carbon nitride for efficient metal-free catalysis

Nitrogen-doped carbon materials are proposed as promising metal-free catalysts for persulfate-mediated catalytic oxidation process, yet the nitrogen content in the final carbon products is typically low. Moreover, controversies remain in the unambiguous identification of active sites in nitrogen-doped carbons for persulfate activation. Here we report the facile synthesis of nitrogen-doped carbon material via one-step pyrolysis of urea and D-mannitol, which simultaneously combine ultrahigh nitrogen content (up to 33.75 at%) with apparent porous structure via transformation from graphitic carbon nitride. With this strategy, the highly nitrogen-doped porous carbon (NC_1.0) exhibits excellent catalytic activity toward peroxymonosulfate (PMS) activation for oxidation of organic pollutants. Both experiments and density functional theory (DFT) calculations, for the first time, revealed that the electron-rich graphitic N and electron-deficient carbon atom adjacent to graphitic N in NC_1.0 served as active sites for PMS reduction and oxidation toward the generation of hydroxyl radical (OH) and singlet oxygen (¹O₂), respectively, in which PMS oxidation was the main reaction in the course of PMS activation rendering ¹O₂ the dominant reactive oxygen species (ROS) in the NC_1.0/PMS system. More importantly, NC_1.0 presents robust stability in PMS activation, superior to most reported nitrogen-doped carbon-based catalysts, offering great promise for practical environmental remediation.

Bridge engineering in photocatalysis and photoelectrocatalysis

Solar driven photocatalysis and photoelectrocatalysis have emerged as promising strategies for clean, low-cost, and environmental-friendly production of renewable energy and removal of pollutants. There are three crucial steps for the photocatalytic and photoelectrochemical (PEC) processes: light absorption, charge separation and transportation, and surface catalytic reactions. While significant achievement has been made in developing multiple-component photocatalysts to optimize the three steps for improved solar-to-chemical energy conversion efficiency, it remains challenging when weak interfacial contact between components/particles hinders charge transfer, restricts electron-hole separation and lowers the structural stability of catalysts. Moreover, owing to the mismatch of energy bands, an undesirable charge transfer direction leads to an adverse consequence. To tackle these challenges, bridges are implemented to smoothen the interfacial charge transfer, improve the stability of catalysts, mediate the charge transfer directions and improve the photocatalytic/PEC performance. In this review, we present the advances in bridge engineering in photocatalytic/PEC systems. Starting with the definition and classifications of bridges, we summarize the architectures of the reported bridged photocatalysts. Then we systematically discuss the insight into the roles and fundamental mechanisms of bridges in various photocatalytic/PEC systems and their contributions to activity enhancement in various reactions. Finally, the challenges and perspectives of bridged photocatalysts are featured.

Biomass Schiff base polymer-derived N-doped porous carbon embedded with CoO nanodots for adsorption and catalytic degradation of chlorophenol by peroxymonosulfate

The development of highly active and multifunctional carbocatalysts modified with heteroatoms or metal species is crucial for practical environmental remediation applications. In this study, nitrogen-doped porous carbon embedded with highly dispersed CoO nanodots (CoO-N-C) was successfully prepared from a biomass-derived Schiff base polymer for the first time. The morphology analysis shows that CoO nanodots were embedded in the N doped carbon layer with size of ∼6.5 nm. CoO-N-C catalyst exhibited excellent 4-CP adsorption efficiency as well as excellent catalytic performance in the activation of peroxymonosulfate (PMS) for 4-CP degradation. Total organic carbon (TOC) removal was close to 99.7% and involved a combination of adsorption and degradation processes. Singlet oxygen (¹O₂) was found to be the dominant oxidative species for 4-CP degradation. The underlying mechanism of these processes were elucidated, and it was found that the introduction of CoO nanodots in CoO-N-C not only enhanced radical catalytic processes, but also significantly enhanced the non-radical catalytic processes of PMS activation. This derived from the synergistic effect between the embedded CoO nanodots and doped nitrogen for the increase of electron density on carbon surface of catalyst, thereby accelerating the electron transfer process for PMS activation and improving the catalytic performance.

Preparation and characterization of Chicory leaf powder and its application as a nano-native plant sorbent for removal of Acid Blue 25 from aqueous media: isotherm, kinetic and thermodynamic study of the adsorption phenomenon

In this study, the Chicory leaf powder (CLP) was used as a native adsorbent to eliminate the Acid Blue 25 dye from aqueous media. The prepared native adsorbent was characterized by several techniques including the X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform spectroscopy (FTIR), Brunauer–Emmet–Teller essay (BET), and particle size analyzer (PSA). A collection of experiments was performed to distinguish the optimal conditions and to probe the effects of the different parameters such as initial concentration, contact time, adsorbent dosage, pH of solution, and temperature on the sorbent capacity. The attained optimal conditions for removal the Acid Blue 25 dye were pH = 3–4, contact time 50 min, dosage 0.1 g, and initial concentrations 10 (mg/L) at 30 °C. The adsorption data revealed that the adsorption procedure has more match with the Langmuir isotherm than others. The kinetic data were better fitted with the pseudo-second-order pattern with a trusty correlation coefficient. Finally, the thermodynamic parameters illustrated that the adsorption process is exothermal and spontaneous. Based on magnitude of the standard enthalpy change related to the studied adsorption, we may derive that the considered adsorption is physical adsorption.

Effective photocatalytic degradation and physical adsorption of methylene blue using cellulose/GO/TiO2 hydrogels

Environmentally friendly cellulose/GO/TiO₂ hydrogel photocatalyst has been successfully fabricated via a green, simple, and one-step method and evaluated as the photocatalyst and adsorbent for the removal of methylene blue (MB). The XRD and FTIR analysis suggested the strong interaction among cellulose, GO and TiO₂, resulting from the formation of hydrogen bonds. Due to the unique porous structure of cellulose hydrogel and introduction of GO, the cellulose/GO/TiO₂ hydrogel showed superior (degradation ratio ∼ 93%) and reproducible (no significant change during the ten consecutive cycles) performance in the removal of MB under UV light. Consequently, the prepared cellulose/GO/TiO₂ hydrogel can be applied as an eco-friendly, high-performance, reproducible, and stable photocatalyst and adsorbent for the removal of MB. This green hydrogel is a promising candidate for dye wastewater treatment. Moreover, this work is expected to extend the scope of bio-templated synthesis of other nanomaterials for various applications.

New functional cellulose/GO/TiO₂ hydrogels are prepared via a simple method, showing superior and reproducible performance in the removal of MB.

Insight into the mechanisms for hexavalent chromium reduction and sulfisoxazole degradation catalyzed by graphitic carbon nitride: The Yin and Yang in the photo-assisted processes

As robust polymeric catalysts, graphitic carbon nitride (g-C₃N₄) has been known to have great application potential in environmental remediation. However, the mechanisms in the photo-assisted catalytic processes during the reduction or oxidation of pollutants are still difficult to discern and therefore not well studied. In this work, visible-assisted catalytic reduction of hexavalent chromium (Cr(VI)) or oxidation of sulfisoxazole (SIZ) by g-C₃N₄ with the addition of formic acid (FA) or potassium peroxydisulfate (PS) were systematically investigated. Effects of operation parameters such as g-C₃N₄ dosage, FA concentration, Cr(VI) concentration, solution pH, PS concentration were studied. The results showed g-C₃N₄ can be effective and robust catalyst for both the reduction (Yin) and oxidation (Yang) reactions in the environmental remediation. Mechanisms were studied by using electron spin resonance (ESR) spectroscopy. The results revealed the CO 2^- is the predominant radical for Cr(VI) reduction in the g-C₃N₄/FA/Vis system and the SO₄^- and OH are all the main radicals for the oxidation of SIZ in the g-C₃N₄/PS/Vis system. The photo-generated carriers by g-C₃N₄, act as radical initiator, were responsible for the production of the reactive radical species in aqueous solution. This work not only shed a new light on the application of semiconductor polymers for the removal of micropollutants and also will expand the applicability of the polymeric photocatalysts for environmental remediation.

Facile one-step hydrothermal synthesis of α-Fe2O3/g-C3N4 composites for the synergistic adsorption and photodegradation of dyes

With the expansion of industrialization, dye pollution has become a significant hazard to humans and aquatic ecosystems. In this study, α-Fe₂O₃/g-C₃N₄-R (where R is the relative percentage of α-Fe₂O₃) composites were fabricated by a one-step method. The as-prepared α-Fe₂O₃/g-C₃N₄-0.5 composites showed excellent adsorption capacities for methyl orange (MO, 69.91 mg g⁻¹) and methylene blue (MB, 29.46 mg g⁻¹), surpassing those of g-C₃N₄ and many other materials. Moreover, the ionic strength and initial pH influenced the adsorption process. Relatively, the adsorption isotherms best fitted the Freundlich model, and the pseudo-second-order kinetic model could accurately describe the kinetics for the adsorption of MO and MB by α-Fe₂O₃/g-C₃N₄-0.5. Electrostatic interaction and π–π electron donor–acceptor interaction were the major mechanisms for MO/MB adsorption. In addition, the photocatalytic experiment results showed that more than 79% of the added MO/MB was removed within 150 min. The experimental results of free-radical capture revealed that holes (h⁺) were the major reaction species for the photodegradation of MO, whereas MB was reduced by the synergistic effect of hydroxyl radicals (·OH) and holes (h⁺). This study suggests that the α-Fe₂O₃/g-C₃N₄ composites have an application potential for the removal of dyes from wastewater.

Simple one-step hydrothermal synthesis of α-Fe₂O₃/g-C₃N₄ composites for the synergistic adsorption and photodegradation of dyes