Removal of alachlor, diuron and isoproturon in water in a falling film dielectric barrier discharge (DBD) reactor combined with adsorption on activated carbon textile: Reaction mechanisms and oxidation by-products

Pesticide residues in drinking water, their potential risk to human health and removal options

The application of pesticides in agricultural and public health sectors has resulted in substantially contaminated water resources with residues in many countries. Almost no reviews have addressed pesticide residues in drinking water globally; calculated hazard indices for adults, children, and infants; or discussed the potential health risk of pesticides to the human population. The objectives of this article were to summarize advances in research related to pesticide residues in drinking water; conduct health risk assessments by estimating the daily intake of pesticide residues consumed only from drinking water by adults, children, and infants; and summarize options for pesticide removal from water systems. Approximately 113 pesticide residues were found in drinking water samples from 31 countries worldwide. There were 61, 31, and 21 insecticide, herbicide, and fungicide residues, respectively. Four residues were in toxicity class IA, 14 residues were in toxicity class IB, 55 residues were in toxicity class II, 17 residues were in toxicity class III, and 23 residues were in toxicity class IV. The calculated hazard indices (HIs) exceeded the value of one in many cases. The lowest HI value (0.0001) for children was found in Canada, and the highest HI value (30.97) was found in Egypt, suggesting a high potential health risk to adults, children, and infants. The application of advanced oxidation processes (AOPs) showed efficient removal of many pesticide classes. The combination of adsorption followed by biodegradation was shown to be an effective and efficient purification option. In conclusion, the consumption of water contaminated with pesticide residues may pose risks to human health in exposed populations.

Effects of NaOH Activation on Adsorptive Removal of Herbicides by Biochars Prepared from Ground Coffee Residues

In this study, the adsorption of herbicides using ground coffee residue biochars without (GCRB) and with NaOH activation (GCRB-N) was compared to provide deeper insights into their adsorption behaviors and mechanisms. The physicochemical characteristics of GCRB and GCRB-N were analyzed using Brunauer–Emmett–Teller surface area, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction and the effects of pH, temperature, ionic strength, and humic acids on the adsorption of herbicides were identified. Moreover, the adsorption kinetics and isotherms were studied. The specific surface area and total pore volume of GCRB-N (405.33 m2/g and 0.293 cm3/g) were greater than those of GCRB (3.83 m2/g and 0.014 cm3/g). The GCBR-N could more effectively remove the herbicides (Qe,exp of Alachlor = 122.71 μmol/g, Qe,exp of Diuron = 166.42 μmol/g, and Qe,exp of Simazine = 99.16 μmol/g) than GCRB (Qe,exp of Alachlor = 11.74 μmol/g, Qe,exp of Diuron = 9.95 μmol/g, and Qe,exp of Simazine = 6.53 μmol/g). These results suggested that chemical activation with NaOH might be a promising option to make the GCRB more practical and effective for removing herbicides in the aqueous solutions.

Ultra-high synergetic intensity for humic acid removal by coupling bubble discharge with activated carbon

Humic acid (HA) removal research focuses on the global water treatment industry. In this work, efficient HA degradation with an ultra-high synergetic intensity is achieved by combined bubble discharge with activated carbon (AC). Adding AC to the discharge greatly improves HA removal efficiency and degradation speed; the synergetic intensity reaches 651.52% in the combined system, and the adsorption residual on AC is 4.52%. After 90 min of treatment, the HA removal efficiency reaches 98.90%, 31.29%, and 7.61% in the plasma-AC combined, solo bubble discharge, and solo AC adsorption systems, respectively. During the plasma process, the number of pore structures and active sites and the amount of oxygen-containing functional groups on the AC surface increase, resulting in a higher adsorption capacity to reactive species (H₂O₂ and O₃) and HA and promoting interactions on the AC surface. For HA mineralization, the presence of AC greatly promotes the destruction of aromatic structures and chromophoric HA functional groups.

Sensitive simultaneous voltammetric determination of the herbicides diuron and isoproturon at a platinum/chitosan bio-based sensing platform

Phenylurea herbicides are persistent contaminants, which leads their transport to the surface and ground waters, affecting human and aquatic organisms. Different analytical methods have been reported for the detection of phenylureas; however, several of them are expensive, time-consuming, and require complex pretreatment steps. Here, we show a simple method for the simultaneous electrochemical determination of two phenylurea herbicides by differential pulse adsorptive stripping voltammetry (DPAdSV) using a modified platinum/chitosan electrode. The one-step synthesized platinum/chitosan PtNPs/CS was successfully characterized by TEM, XRPD, and FT-IR, and applied through the sensing platform designated as PtNPs/CS/GCE. This bio-based modified electrode is proposed for the first time for the individual and/or simultaneous electrochemical detection of the phenylurea herbicides diuron and isoproturon compounds extensively used worldwide that present a very similar chemical structure. Electrochemical and interfacial characteristics of the modified electrode were evaluated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). It was found that the oxidation mechanism of diuron and isoproturon occurs in two different pathways, with a peak-to-peak definition of ca. 0.15 V. Under differential pulse adsorptive stripping voltammetry (DPAdSV) optimized conditions, the limit of detection (LOD) was estimated as 7 μg L^-1 for isoproturon and 20 μg L^-1 for diuron (E_d = +0.8 V; t_d = 100 s). The proposed method was successfully applied to the determination of both analytes in river water samples, at three different levels, with a recovery range of 90-110%. The employment of the bio-based sensing platform PtNPs/CS/GCE allows a novel and easy analytical method to the multi-component phenylurea herbicides detection.

Solid-State Membrane Sensors Based on Man-Tailored Biomimetic Receptors for Selective Recognition of Isoproturon and Diuron Herbicides

Solid-contact ion-selective electrodes (SC-ISEs) have shown great potential for routine and portable ion detection. The introduction of nanomaterials as ion-to-electron transducers and the adoption of different performance-enhancement strategies have significantly promoted the development of SC-ISEs. Herein, new solid-contact ion-selective electrodes, along with the implementation of multiwalled carbon nanotubes (MWCNTs) as ion-to-electron transducers and potassium tetrakis (p-chlorophenyl) borate (KTpClB) as lipophilic ionic additives, were presented for the detection of isoproturon (IPU) and diuron (DU) herbicides. Molecularly imprinted polymers (MIPs), with special molecule recognition properties for isoproturon (IPU) and diuron (DU), were prepared, characterized, and introduced as sensory recognition materials in the presented electrodes. Sensors revealed a near-Nernstian response for both isoproturon (IPU) and diuron (DU) with slopes of 53.1 ± 1.2 (r² = 0.997) and 57.2 ± 0.3 (r² = 0.998) over the linear ranges of 2.2 × 10^-6-1.0 × 10^-3 M and 3.2 × 10^-6-1.0 × 10^-3 M with detection limits of 8.3 × 10^-7 and 1.4 × 10^-6 M, respectively. The response time of the presented sensors was found to be <5 s and the lifetime was at least eight weeks. The sensors exhibited good selectivity towards isoproturon (IPU) and diuron (DU) in comparison with some other herbicides, alkali, alkaline earth, and heavy metal ions. The presented sensors were successfully applied for the direct determination of isoproturon (IPU) and diuron (DU) in real water samples.

The theoretical investigation of OH-induced degradation mechanisms of isoproturon

Herbicides are widely applied in agriculture, which causes emerging concern for contaminating surface water and groundwater. The degradation of isoproturon, being a typical phenylurea herbicide, has been studied much with advanced oxidation processes. However, little information on the detailed degradation mechanism from the theoretical level is available. In the present work, the degradation mechanisms of OH-initiated reactions of isoproturon were studied at the MPWB1K/6-311+G(3df, 2p)//MPWB1K/6-31+G(d, p) level. The calculation results display that H-atom abstraction, ·OH addition, and ·OH substitution pathways are found for ·OH and isoproturon reactions. For H-atom abstractions, the results show that aliphatic H atoms are more easily abstracted by ·OH than the aromatic H atoms, and the pathway R6 has the lowest energy barrier of 6.65 kcal mol^-1, indicating that H in the -CH₃ group attached to the N2 atom could be most favorably abstracted. Six pathways for ·OH addition to the six sites of the phenyl ring are identified with low energy barriers, which are in good accordance with the fact that the additions of ·OH to the phenyl ring were the important steps from experimental results. For ·OH substitution reactions, two pathways with high activation energies are found, and the corresponding products have been also detected from previous experimental studies, suggesting that the substitution reactions could also occur.

Physico-chemical processes

The review scans research articles published in 2018 on physico-chemical processes for water and wastewater treatment. The paper includes eight sections, that is, membrane technology, granular filtration, flotation, adsorption, coagulation/flocculation, capacitive deionization, ion exchange, and oxidation. The membrane technology section further divides into six parts, including microfiltration, ultrafiltration, nanofiltration, reverse osmosis/forward osmosis, and membrane distillation. PRACTITIONER POINTS: Totally 266 articles on water and wastewater treatment have been scanned; The review is sectioned into 8 major parts;  Membrane technology has drawn the widest attention from the research community.

Removal of alachlor in water by non-thermal plasma: Reactive species and pathways in batch and continuous process

Pesticides are emerging contaminants frequently detected in the aquatic environment. In this work, a novel approach combining activated carbon adsorption, oxygen plasma treatment and ozonation was studied for the removal of the persistent chlorinated pesticide alachlor. A comparison was made between the removal efficiency and energy consumption for two different reactor operation modes: batch-recirculation and single-pass mode. The kinetics study revealed that the insufficient removal of alachlor by adsorption was significantly improved in terms of degradation efficiency and energy consumption when combined with the plasma treatment. The best efficiency (ca. 80% removal with an energy cost of 19.4 kWh m^-³) was found for the single-pass operational mode of the reactor. In the batch-recirculating process, a complete elimination of alachlor by plasma treatment was observed after 30 min of treatment. Analysis of the reactive species induced by plasma in aqueous solutions showed that the decomposition of alachlor mainly occurred through a radical oxidation mechanism, with a minor contribution of long-living oxidants (O₃, H₂O₂). Investigation of the alachlor oxidation pathways revealed six different oxidation mechanisms, including the loss of aromaticity which was never before reported for plasma-assisted degradation of aromatic pesticides. It was revealed that the removal rate and energy cost could be further improved with more than 50% by additional O₃ gas bubbling in the solution reservoir.

Analysis of Short-Lived Reactive Species in Plasma-Air-Water Systems: The Dos and the Do Nots

This Feature addresses the analysis of the reactive species generated by nonthermal atmospheric pressure plasmas, which are widely employed in industrial and biomedical research, as well as first clinical applications. We summarize the progress in detection of plasma-generated short-lived reactive oxygen and nitrogen species in aqueous solutions, discuss the potential and limitations of various analytical methods in plasma-liquid systems, and provide an outlook on the possible future research goals in development of short-lived reactive species analysis methods for a general nonspecialist audience.