Construction of hierarchically porous monoliths from covalent organic frameworks (COFs) and their application for bisphenol A removal

Metal-Organic Framework and Covalent-Organic Framework-Based Aerogels: Synthesis, Functionality, and Applications

Metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs)-based aerogels are garnering significant attention owing to their unique chemical and structural properties. These materials harmoniously combine the advantages of MOFs and COFs-such as high surface area, customizable porosity, and varied chemical functionality-with the lightweight and structured porosity characteristic of aerogels. This combination opens up new avenues for advanced applications in fields where material efficiency and enhanced functionality are critical. This review provides a comparative overview of the synthetic strategies utilized to produce pristine MOF/COF aerogels as well as MOF/COF-based hybrid aerogels, which are functionalized with molecular precursors and nanoscale materials. The versatility of these aerogels positions them as promising candidates for addressing complex challenges in environmental remediation, energy storage and conversion, sustainable water-energy technologies, and chemical separations. Furthermore, this study discusses the current challenges and future prospects related to the synthesis techniques and applications of MOF/COF aerogels.

Preparation of sp2 carbon-bonded π-conjugated COF aerogels by ultrasound-assisted mild solvothermal reaction for multi-functional applications

Molding COFs into aerogels from monomers can establish interpenetrating spatial network structures on the centimeter scale that increase the accessibility of dominant pore channels and the convenience of real application, which radically gets rid of the difficult reprocessing problems of insoluble and non-fusible powder COFs. However, the construction of bulk COF structures and achieving crystallinity are often incompatible, especially with sp2 carbon-based COFs, whose powder synthesis has been quite demanding. Herein, for the first time, we report an efficient method to prepare sp2 carbon-linked π-conjugated DFB-TMTA-COF (DT-COF) aerogels by an ultrasound-assisted mild solvothermal technique and freeze-drying. Particularly, unlike the typical synthesis methods of vacuum deoxygenation, high temperature and long reaction time, crystalline DT-COF aerogels can be obtained by reacting at 90 °C for 48 h without vacuum sealing. The fluffy, hierarchical porous flower-shaped microsphere clustering of DT-COF aerogels contributes to excellent mechanical properties and better host-guest interactions, which are favorable to utilize the benefits of the highly conjugated structure of channels. As a proof of concept, DT-COF aerogels have been used in absorption, batteries, and sensors, demonstrating enhanced functionality and effectiveness.

Covalent-organic framework nanobionics for robust cytoprotection

We present a novel study introducing a durable and robust covalent-organic framework (COF) nanocoating, developed in situ on living cells. This COF nanocoating demonstrates remarkable resistance against a diverse range of lethal stressors, including high temperature, extreme pH, ultraviolet radiation, toxic metal ions, organic pollutants, and strong oxidative stress. Notably, the nanocoating exhibits exceptional cell survival enhancement under high temperature and strongly acidic conditions, an aspect yet unexplored in the case of metal-organic framework nanocoatings and other nanomaterials. Moreover, functionalization of the nanocoating with an exogenous enzyme catalase enables yeast fermentation and ethanol production even under strong oxidative stress. Our findings establish the durable and robust COF nanocoating as a reliable platform for safeguarding vulnerable microorganisms to allow their utilisation in a wide range of adverse environments.

Covalent organic frameworks based hierarchical porous hybrid monolithic capillary: Synthesis, characterization, and applications in trace metals analysis

The preparation of hierarchical porous monolithic column with high covalent organic frameworks (COF) loading and micropores accessibility is challenging due to the easy aggregability and sedimentation of COFs. Herein, a novel strategy based on high internal phase emulsion (HIPE) polymerization was proposed for preparing COF hybrid capillary monolithic column with hierarchical porosity. COFs with different frameworks including imine COFs (COF-OMe, COF-F and COF-SH), triazine COF (CTF-1) and boron-based COF (COF-5) were selected to investigate the universality of the preparation strategy. The presence of COF in the monolithic capillary was confirmed by scanning electron microscope, X-ray diffraction and fourier transform infrared spectroscopy. Nitrogen adsorption/desorption experiments and thermogravimetric analysis showed that the prepared COF hybrid monolithic capillary exhibited high COF loading (e.g., 28.7% for COF-SH) and accessibility (e.g., 98.5% for COF-SH), mainly due to the thin walls of void-window structures originated from polymerization of HIPE. The successful preparation of water-stable COF-F, COF-OMe, COF-SH and CTF-1 hybrid monolithic columns demonstrated the proposed synthesis strategy is universal to water-stable COF without tedious optimization of dispersion system, effectively avoiding the sedimentation of COF in pre-polymerization solution. Then, the sulfhydryl-modified COF hybrid polymer (poly(COF-SH-HIPE)) monolithic column was evaluated for the extraction of heavy metal ions, and a method based on poly(COF-SH-HIPE) monolithic capillary microextraction on-line coupled with inductively coupled plasma mass spectrometry detection was developed for analysis of trace Cd, Hg and Pb in human fluid samples.

Applications of covalent organic frameworks for the elimination of dyes from wastewater: A state-of-the-arts review

Covalent organic frameworks (COFs) are class of porous coordination polymers made up of organic building blocks joined together by covalent bonding through thermodynamic and controlled reversible polymerization reactions. This review discussed versatile applications of COFs for remediation of wastewater containing dyes, emphasizing the advantages of both pristine and modified materials in adsorption, membrane separation, and advanced oxidations processes. The excellent performance of COFs towards adsorption and membrane filtration has been centered to their higher crystallinity and porosity, exhibiting exceptionally high surface area, pore size and pore volumes. Thus, they provide more active sites for trapping the dye molecules. On one hand, the photocatalytic performance of the COFs was attributed to their semiconducting properties, and when coupled with other functional semiconducting materials, they achieve good mechanical and thermal stabilities, positive light response, and narrow band gap, a typical characteristic of excellent photocatalysts. As such, COFs and their composites have demonstrated excellent potentialities for the elimination of the dyes.

Combinatorial Synthesis of Covalent Organic Framework Particles with Hierarchical Pores and Their Catalytic Application

Precise tailoring of the aggregation state of covalent organic frameworks (COFs) to form a hierarchical porous structure is critical to their performance and applications. Here, we report a one-pot and one-step strategy of using dynamic combinatorial chemistry to construct imine-based hollow COFs containing meso- and macropores. It relies on a direct copolymerization of three or more monomers in the presence of two monofunctional competitors. The resulting particle products possess high crystallinity and hierarchical pores, including micropores around 0.93 nm, mesopores widely distributed in the range of 3.1-32 nm, and macropores at about 500 nm, while the specific surface area could be up to 748 m2·g-1, with non-micropores accounting for 60% of the specific surface area. The particles demonstrate unique advantages in the application as nanocarriers for in situ loading of Pd catalysts at 93.8% loading efficiency in the copolymerization of ethylene and carbon monoxide. The growth and assembly of the copolymer could thus be regulated to form flower-shaped particles, efficiently suppressing the fouling of the reactor. The copolymer's weight-average molecular weight and the melting temperature are also highly improved. Our method provides a facile way of fabricating COFs with hierarchical pores for advanced applications in catalysis.

Exploring the synergistic effects of enzyme@lactoferrin hybrid on biomimetic immobilization: Unveiling the impact on catalytic efficiency

Metal-organic frameworks (MOFs) have gained attention as a hopeful material for enzyme immobilization due to their advantageous characteristics, for instance, high surface area and easy construction conditions. Nonetheless, the confinement effect and competing coordination often lead to partial or complete inactivation of the immobilized enzymes. In this study, we present a novel strategy, the lactoferrin-boosted one-pot embedding approach, which efficiently connects enzymes with lactoferrin (LF) hybrid Graphene Oxide (GO)//Pt Nanoparticles/MOF-74 (referred to as enzyme@LF@rGO/PtNP@MOF-74). This approach demonstrates a high embedding efficiency. By employing a hybrid of LF and GO/Pt Nanoparticles as synchronous ligands for Zn-MOF-74, we provide a suitable environment for enzyme immobilization, resulting in enhanced enzymatic activity. The lipase@LF@rGO/PtNP@MOF-74 exhibits improved stability and resistance to organic solvents and significantly enhanced in thermal stability of the lipase@LF@rGO/PtNP@MOF-74 comparing to the free enzyme. The lipase@LF@rGO/PtNP@MOF-74 displayed excellent long-term storage stability, which could protect more than 80 % of the initial activity for 8 weeks. Besides, the lipase@LF@rGO/PtNP@MOF-74 had high reusability, which showed a high degree of activity (more than 75 %) after 20 cycles. As a bio-macromolecule, lactoferrin possesses bio-affinity, creating a favorable microenvironment for enzymes and minimizing the impact of external factors on their conformation and activity during bio-macromolecule utilization.

Separation of C18 Fatty Acid Esters and Fatty Acids Derived from Vegetable Oils Using Nanometer-Sized Covalent Organic Frameworks Incorporated in Polyepoxy Membranes

Fatty acids (FAs) and FA methyl esters (FAMEs) are easily isolated from vegetable oil and are important starting materials for the chemical industry to produce commercial products that are green, biorenewable, and nontoxic. A challenge in these applications is that mixtures of five or more FAs and FAMEs are isolated from a vegetable oil source, and methods to separate these mixtures are decades old and have increasingly high costs associated with the production of high-purity single-component FAs or FAMEs. We developed a method to separate these mixtures using mixed matrix membranes containing nanometer-sized covalent organic frameworks. The 2D, crystalline COFs possessed narrow distributions of pore sizes of 1.3, 1.8, 2.3, and 3.4 nm that separated FAs and FAMEs based on their degrees of unsaturation. The COFs were synthesized, characterized, and then encapsulated at 10 or 20% by weight into a prepolymer of epoxy that was then fully cured. For all mixed matrix membranes, as the degree of unsaturation increased, the FAs or FAMEs had a slower flux. The largest difference in flux was obtained for a COF/epoxy membrane with a pore size of 1.8 nm, and methyl stearate had a 5.9× faster flux than methyl linolenate. These are the first membranes that can separate the important C18 FAs and FAMEs found in vegetable oil.

Facile Synthesis of Quinolinecarboxylic Acid-Linked Covalent Organic Framework via One-Pot Reaction for Highly Efficient Removal of Water-Soluble Pollutants

To efficiently eliminate highly polar organic pollutants from water has always been a difficult issue, especially in the case of ultralow concentrations. Herein, we present the facile synthesis of quinolinecarboxylic acid-linked COF (QCA-COF) via the Doebner multicomponent reaction, possessing multifunction, high specific surface area, robust physicochemical stability, and excellent crystallinity. The marked feature lies in the quinolinyl and carboxyl functions incorporated simultaneously to QCA-COF in one step. The major cis-orientation of carboxyl arms in QCA-COF was speculated by powder X-ray diffraction and total energy analysis. QCA-COF demonstrates excellent adsorption capacity for water-soluble organic pollutants such as rhodamine B (255.7 mg/g), methylene blue (306.1 mg/g), gentamycin (338.1 mg/g), and 2,4-dichlorophenoxyacetic acid (294.1 mg/g) in water. The kinetic adsorptions fit the pseudo-second order model and their adsorption isotherms are Langmuir model. Remarkably, QCA-COF can capture the above four water-soluble organic pollutants from real water samples at ppb level with higher than 95% removal efficiencies and excellent recycling performance.

Methacrylate bonded covalent organic framework monolithic column online coupling with high-performance liquid chromatography for analysis of trace estrogens in food

Covalent organic frameworks (COFs) are a burgeoning class of crystalline porous materials with unique properties and have been considered as a promising functional extraction medium in sample pretreatment. In this study, a new methacrylate-bonded COF (TpTh-MA) was well designed and synthesized via the aldehyde-amine condensation reaction, and the TpTh-MA was incorporated into poly (ethylene dimethacrylate) porous monolith by a facile polymerization reaction inside capillary to prepare a novel TpTh-MA monolithic column. The fabricated TpTh-MA monolithic column was characterized with scanning electron microscope, Fourier transform infrared spectrometer, X-ray diffraction, and N₂ adsorption-desorption experiments. Then, the homogeneous porous structure, good permeability and high mechanical stability of TpTh-MA monolithic column was used as separation and enrichment media of capillary microextraction, which was coupled with high-performance liquid chromatography fluorescence detection for online enrichment and analysis of trace estrogens. The main experimental parameters influencing the extraction efficiency were systematically investigated. The adsorption mechanism for three estrogens was also explored and discussed based on hydrophobic effect, π-π affinity and hydrogen bonding interaction, which contributed to its strong recognition affinity to target compounds. The enrichment factors of the TpTh-MA monolithic column micro extraction method for the three estrogens were 107-114, indicating a significant preconcentration ability. Under optimal conditions, a new online analysis method was developed and exhibited good sensitivity and wide linearity range of 0.25-100.0 µg·L^-1 with a coefficient of determination (R²) higher than 0.9990 and a low limit of detection with 0.05-0.07 µg·L^-1. The method was successfully applied for online analysis of three estrogens of milk and shrimp samples and the recoveries obtained from spiking experiments were in range of 81.4-113% and 77.9-111%, with the relative standard deviations of 2.6-7.9% and 2.1-8.3% (n = 5), respectively. The results revealed the great potential for the application of the COFs-bonded monolithic column in the field of sample pretreatment.

Shape-Controlled Synthesis of Covalent Organic Frameworks Enabled by Polymerization-Induced Phase Separation

The shape and morphology modulations of covalent organic frameworks (COFs) are both difficult, but are of significance to tackle to realize high-performance and practical applications. Here, a two-step method is reported that separates the phase separation and crystallization processes for the shape-controlled synthesis of COFs. The insight into the polymerization-induced phase separation (PIPS) allows for the flexible shaping of COFs into column, rod, film and others, as well as for constructing hierarchically porous structure. The as-synthesized COF monoliths are crack-free, no powder detaching, and show 214 MPa of compressive modulus. The resulting good permeability and mechanical flexibility enable COF films to apply for flow-through adsorption and extraction of pollutants at high flow rates. This work successfully resolves the contradiction between PIPS and crystallization, offering a general approach for scalable production of COFs with desired shapes, sizes, and morphologies.

Extraction and determination of terpenoids from Zexie Decoction based on a porous organic cage-doped monolithic cartridge

A monolithic solid-phase extraction (SPE) cartridge packed with a composite adsorbent was fabricated via polymerization using dodecene as the monomer with the porous organic cage (POC) material doped, combing with an analytical column through a high-performance liquid chromatography (HPLC) instrument, which was used for the online extraction and separation of 23-acetyl alismol C, atractylodes lactone II and atractylodes lactone III from Zexie Decoction. The POC-doped adsorbent shows porous structure with a relatively high specific surface area of 85.50 m²/g, which was obtained from the characterizations of a scanning electron microscope and an automatic surface area and porosity analyser. Efficient extraction and separation of three target terpenoids was achieved by an online SPE-HPLC method based on the POC-doped cartridge, which exhibits strong matrix-removal ability and good terpenoids-retention ability with a high adsorption capacity, due to the interactions of hydrogen bond and hydrophobicity between the terpenoids and the POC-doped adsorbent. Method validation shows good linearity (r ≥ 0.9998) of the regression equation, and high accuracy with the spiked recovery in the range of 99.2 %-100.8 % of the proposed method. Compared to the generally disposable adsorbent, this work fabricated a reusable monolithic cartridge, which can be used for at least 100 times, with the RSD based on the peak area of the three terpenoids less than 6.6 %.

Advanced Covalent Organic Framework-Based Membranes for Recovery of Ionic Resources

Membrane technology has shown a viable potential in conversion of liquid-waste or high-salt streams to fresh waters and resources. However, the non-adjustability pore size of traditional membranes limits the application of ion capture due to their low selectivity for target ions. Recently, covalent organic frameworks (COFs) have become a promising candidate for construction of advanced ion separation membranes for ion resource recovery due to their low density, large surface area, tunable channel structure, and tailored functionality. This tutorial review aims to analyze and summarize the progress in understanding ion capture mechanisms, preparation processes, and applications of COF-based membranes. First, the design principles for target ion selectivity are illustrated in terms of theoretical simulation of ions transport in COFs, and key properties for ion selectivity of COFs and COF-based membranes. Next, the fabrication methods of diverse COF-based membranes are classified into pure COF membranes, COF continuous membranes, and COF mixed matrix membranes. Finally, current applications of COF-based membranes are highlighted: desalination, extraction, removal of toxic metal ions, radionuclides and lithium, and acid recovery. This review presents promising approaches for design, preparation, and application of COF-based membranes in ion selectivity for recovery of ionic resources.

Enabling Solution Processable COFs through Suppression of Precipitation during Solvothermal Synthesis

Covalent organic frameworks (COFs) are crystalline, nanoporous materials of interest for various applications, but current COF synthetic routes lead to insoluble aggregates which precludes processing for practical implementation. Here, we report a COF synthesis method that produces a stable, homogeneous suspension of crystalline COF nanoparticles that enables the preparation of COF monoliths, membranes, and films using conventional solution-processing techniques. Our approach involves the use of a polar solvent, diacid catalyst, and slow reagent mixing procedure at elevated temperatures which altogether enable access to crystalline COF nanoparticle suspension that does not aggregate or precipitate when kept at elevated temperatures. On cooling, the suspension undergoes a thermoreversible gelation transition to produce crystalline and highly porous COF materials. We further show that the modified synthesis approach is compatible with various COF chemistries, including both large- and small-pore imine COFs, hydrazone-linked COFs, and COFs with rhombic and hexagonal topologies, and in each case, we demonstrate that the final product has excellent crystallinity and porosity. The final materials contain both micro- and macropores, and the total porosity can be tuned through variation of sample annealing. Dynamic light scattering measurements reveal the presence of COF nanoparticles that grow with time at room temperature, transitioning from a homogeneous suspension to a gel. Finally, we prepare imine COF membranes and measure their rejection of polyethylene glycol (PEG) polymers and oligomers, and these measurements exhibit size-dependent rejection and adsorption of PEG solutes. This work demonstrates a versatile processing strategy to create crystalline and porous COF materials using solution-processing techniques and will greatly advance the development of COFs for various applications.

Nitrogen-rich triazine-based porous polymers for efficient removal of bisphenol micropollutants

Achieving both rapid adsorption rate and high adsorption capacity for bisphenol micropollutants from aquatic systems is critical for efficient adsorbents in water remediation. Here, we elaborately prepared three nitrogen-rich triazine-based porous polymers (NTPs) with similar geometric configurations and nitrogen contents (41.70-44.18 wt%) while tunable BET surface areas and micropore volumes in the range of 454.7-536.3 m² g^-1 and 0.20-0.84 cm³ g^-1, respectively. It was systematically revealed that the synergy of hydrogen bonding, π-π electron-donor-acceptor interaction, and micropore preservation promoted the rapid (within 5 min) and high capacity adsorption of bisphenols by NTPs. Particularly, microporous-dominated NTPs-3 with the highest micro-pore volume (0.84 cm³ g^-1) displays remarkable adsorption capacity towards bisphenol A as evidenced by the adsorption capacity of 182.23 mg g^-1. A simple column filter constructed by NTPs-3 also expressed good dynamic adsorption and regeneration capacity. This work provided new insight into the rational design and engineering of nitrogen-rich porous polymers for the remediation of micropollutant wastewater.

Covalent organic frameworks as promising adsorbent paradigm for environmental pollutants from aqueous matrices: Perspective and challenges

Covalent organic frameworks (COFs) are an emerging class of new porous crystalline polymers materials having robust framework, outstanding structural regularity, highly ordered aperture size, inherent porosity, and chemical stability with designer properties, making them an ideal material for adsorbing a variety of contaminants from water bodies. Presented study focusses on the current advances and progress of pristine COFs as well as COFs based composites as an emerging substitute for the adsorption and removal of a variety of pollutants including water desalination technique, heavy metals, pharmaceuticals, dyes and organic pollutants. The absorption capabilities of COFs-derived architecture are evaluated and equated with those of other commonly used adsorbents. The interaction between sorption ability and structural property as well as some regularly utilized ways to improve the adsorption performance of COFs-based materials are also reviewed. Finally, perspective and a summary about the challenges and opportunities of COFs and COFs-derived materials are discussed to deliver some exciting data for fabricating and designing of COFs and COFs-derived materials for remediation of environmental pollutants.

Determination of phthalate esters in bottled beverages by direct immersion solid phase microextraction with a porous boron nitride coated fiber followed by gas chromatography-mass spectrometry

A porous boron nitride with a large surface area was synthesized by one step grinding method with melamine, urea and boric acid as the precursors. The prepared porous boron nitride was used as the fiber coating material for the solid-phase microextraction of seven phthalate esters (diethylphthalate, diallyl phthalate, diisobutyl phthalate, dibutyl phthalat, butylbenzyl phthalate, dicyclohexyl phthalate and di-2-ethylhexylphthalate) prior to their gas chromatography-mass spectrometric detection. The important experimental parameters including the extraction time, extraction temperature, salt concentration, and stirring rate were optimized by both single factor and central composite design methods. Under the optimized experimental conditions, the linear response range for the analytes was from 0.030 to 30.0 μg L^-1 , and the limits of detection were from 0.010 to 0.040 μg L^-1 , respectively. The relative recoveries of the analytes for spiked samples at two concentration levels were 83.0%-109% with the relative standard deviations less than 12%. The established method was successfully applied for the determination of the phthalate esters in bottled juice beverage samples. This article is protected by copyright. All rights reserved.

Studying the adsorption mechanisms of nanoplastics on covalent organic frameworks via molecular dynamics simulations

Covalent organic frameworks (COFs) with well-defined supramolecular structures and high surface-area-to-volume ratio have received extensive attention on their adsorption of contaminants from micro- to nano-size. Here, we studied the adsorption mechanisms of three typical nanoplastics (NP), including polyethylene (PE), nylon-6 (PA 6), and polyethylene terephthalate (PET) on chemically stable COFs (TpPa-X, X = H, CH₃, OH, NO₂ and F) by molecular dynamics simulations. Depending on molecular structure and surface composition, two distinct interactions-electrostatic interaction and van der Waals (vdW) interaction-are identified to be responsible for the adsorption of different NP pollutants on TpPa-X. The vdW interaction is dominant during the adsorption process, while polar groups in polymers and COFs can enhance the adsorption because of the electrostatic interaction. Compared with other functional COFs, we found that TpPa-OH shows the strongest adsorption with the NP pollutants employed in this study. This work reveals the COF-polymer adsorption behavior and properties at atomic scale, which is crucial to the development of promising COF materials to deal with NP pollution.

NaCl template-assisted synthesis of self-floating COFs foams for the efficient removal of sulfamerazine

The preparation of hierarchical porous covalent organic frameworks (HP-COFs) is of great significance due to their inherent porosity and low density. However, it is still very challenging owing to the poor machinability of COFs. Herein, a simple and cost-efficient strategy for the synthesis of HP-COFs was proposed. In particular, p-toluenesulfonic acid and NaCl, both of which can be recycled, are utilized as catalyst and template, respectively. The resulting HP-TpBD-900 featuring abundant macropore and mesopore as well as large specific surface area (~700 m² g^-1) possessed self-floating ability and was turned out to be a promising adsorbent for the efficient removal of sulfamerazine (SMR) in aqueous solution. The maximum adsorption capacity is 168 mg g^-1, which is more than twice in comparison to that of material prepared without NaCl template. In addition, no significant decrease in adsorption capacity was observed after 5 cycles. Furthermore, the density functional theory (DFT) method was utilized to elucidate the adsorption mechanism, which could be dominated by hydrogen bonding and C-H···π interaction. This work not only provides a new strategy for the synthesis of HP-COFs, but also contributes to boosting the application of COFs in the field of wastewater treatment.

Extraction and determination of tussilagone from Farfarae Flos with online solid-phase extraction-high-performance liquid chromatography using a homemade monolithic cartridge doped with porous organic cage material

A solid-phase extraction cartridge was fabricated using diallyl isophthalate as the monomer with the addition of porous organic cage material via in situ free-radical polymerization in a stainless-steel column. The resulting monolithic adsorbent exhibited a relatively uniform porous structure, a high specific surface area of 113.98 m² /g, and multiple functional chemical groups according to the characterization results. An online solid-phase extraction-high-performance liquid chromatography procedure was fabricated to extract and determine tussilagone from Farfarae Flos. The results show that the complex sample matrices can be removed in the solid-phase extraction procedure. Simultaneously, tussilagone can remain, which can be subsequently switched to an octadecylsilane bonded analytical column. The methodological validation showed that the correlation coefficient was 0.9999 with a linear range of 0.6-200.0 µg/mL, the limit of detection was 0.2 µg/mL, the limit of quantification was 0.6 µg/mL, accuracy was 100.3-100.6%, and relative standard deviation of precision was ≤1.9%. The present monolithic cartridge exhibits good reusability of not more than 100 times. The real sample of Farfarae Flos was determined with a tussilagone content of 0.74 mg/g.

Rapid Removal of Perfluoroalkanesulfonates from Water by β-Cyclodextrin Covalent Organic Frameworks

Adsorption is an effective method for the removal of perfluoroalkanesulfonates (PFSAs) from water, and the limitation of the adsorption rate of existing adsorbents motivates efforts to develop novel adsorbents. Here, we developed four β-cyclodextrin covalent organic frameworks (β-CD-COFs) with a rapid removal rate and high adsorption capacity for four PFSAs in water including perfluorooctanesulfonate (PFOS), perfluorobutanesulfonate (PFBS), perfluorohexanesulfonate (PFHxS), and chlorinated polyfluorinated ether sulfonate (F53B). All β-CD-COFs exhibited extremely fast adsorption (adsorption equilibrium <2 min) for PFSAs with high adsorption capacities (0.33-1.51 mmol/g), which were significantly better than those of traditional resins and activated carbons, probably due to the ordered pores of β-CD-COFs and the electron-deficient cavity β-CD. Density functional theory (DFT) calculations also showed that PFSAs could be captured in the β-CD cavity through strong interactions with a high binding energy. The novel β-CD-COFs were highly selective to PFSAs in simulated wastewater impacted by aqueous film-forming foams, and they could also rapidly remove them from an actual chrome plating wastewater within 2 min. Additionally, the β-CD-COFs could be regenerated by methanol with relatively good reusability in four cycles, further highlighting their application potential as PFAS adsorbents in water or wastewater.

Sustainable Chitosan-Dialdehyde Cellulose Nanocrystal Film

In this study, we incorporated 2,3-dialdehyde nanocrystalline cellulose (DANC) into chitosan as a reinforcing agent and manufactured biodegradable films with enhanced gas barrier properties. DANC generated via periodate oxidation of cellulose nanocrystal (CNC) was blended at various concentrations with chitosan, and bionanocomposite films were prepared via casting and characterized systematically. The results showed that DANC developed Schiff based bond with chitosan that improved its properties significantly. The addition of DANC dramatically improved the gas barrier performance of the composite film, with water vapor permeability (WVP) value decreasing from 62.94 g·mm·m-2·atm-1·day-1 to 27.97 g·mm·m-2·atm-1·day-1 and oxygen permeability (OP) value decreasing from 0.14 cm3·mm·m-2·day-1·atm-1 to 0.026 cm3·mm·m-2·day-1·atm-1. Meanwhile, the maximum decomposition temperature (Tdmax) of the film increased from 286 °C to 354 °C, and the tensile strength of the film was increased from 23.60 MPa to 41.12 MPa when incorporating 25 wt.% of DANC. In addition, the chitosan/DANC (75/25, wt/wt) films exhibited superior thermal stability, gas barrier, and mechanical strength compared to the chitosan/CNC (75/25, wt/wt) film. These results confirm that the DANC and chitosan induced films with improved gas barrier, mechanical, and thermal properties for possible use in film packaging.

Chiral Carboxyl-Functionalized Covalent Organic Framework for Enantioselective Adsorption of Amino Acids

Combining chiral molecules and covalent organic frameworks (COFs) with ordered pores can result in chiral COFs, which may be employed in the fields of chiral chemistry. In this study, we constructed a novel carboxyl-functionalized COF TpBD-3COOH first and then integrated a chiral molecule, heptakis (6-amino-6-deoxy)-β-CD (Am7CD), into TpBD-3COOH to obtain TpBD-Am7CD. Comparing TpBD-3COOH with TpBD-Am7CD, it could be observed that chiral selectivities improved significantly after decorating TpBD-3COOH with Am7CD in the adsorption experiment. Meanwhile, TpBD-Am7CD exhibited similar chiral selective abilities as the previously reported β-CD COF when it was employed to adsorb amino acid enantiomers, while the content of Am7CD was much less than that in β-CD COF. This indicated that the framework of TpBD-3COOH enhanced the chiral selective ability of Am7CD, which would be a great chiral carrier material for further application. This work provides a new insight for establishing materials for application in the chiral recognition field. Besides, TpBD-Am7CD resulted in an insoluble powder, which endowed this material with the possibility to be an adsorbent and a stationary phase in chromatography.

A Perspective on the Application of Covalent Organic Frameworks for Detection and Water Treatment

Global population growth and water resource scarcity are significant social problems currently being studied by many researchers focusing on finding new materials for water treatment. The aim is to obtain quality water suitable for drinking and industrial consumption. In this sense, an emergent class of crystalline porous materials known as Covalent-Organic Frameworks (COFs) offers a wide range of possibilities since their structures can be designed on demand for specific applications. Indeed, in the last decade, many efforts have been made for their use in water treatment. This perspective article aims to overview the state-of-the-art COFs collecting the most recent results in the field for water detection of pollutants and water treatment. After the introduction, where we overview the classical design strategies on COF design and synthesis for obtaining chemically stable COFs, we summarize the different experimental methodologies used for COFs processing in the form of supported and free-standing membranes and colloids. Finally, we describe the use of COFs in processes involving the detection of pollutants in water and wastewater treatment, such as the capture of organic compounds, heavy metals, and dyes, the degradation of organic pollutants, as well as in desalination processes. Finally, we provide a perspective on the field and the potential technological use of these novel materials.

Efficient removal of bisphenol pollutants on imine-based covalent organic frameworks: adsorption behavior and mechanism

The extensive use of bisphenol analogues in industry has aggravated the contamination of the water environment, and how to effectively remove them has become a research hotspot. This study presents two imine-based covalent organic frameworks with different pore sizes (COFs) [TAPB (1,3,5-tris(4-aminophenyl)benzene)-Dva (2,5-divinylterephthaldehyde)-PDA (terephthalaldehyde) (COF-1), and TAPB (1,3,5-tris(4-aminophenyl)benzene)-Dva (2,5-divinylterephthaldehyde)-BPDA (biphenyl dialdehyde) (COF-2)], which have achieved the efficient adsorption of bisphenol S (BPS) and bisphenol A (BPA). The maximum adsorption capacity of COF-2 for BPS and BPA obtained from Langmuir isotherms were calculated as 200.00 mg g⁻¹ and 149.25 mg g⁻¹. Both hydrogen bonding and π–π interactions might have been responsible for the adsorption of BPS and BPA on the COFs, where the high adsorption capacity of COFs was due to their unique pore dimensions and structures. Different types of pharmaceutical adsorption studies indicated that COF-2 exhibited a higher adsorption performance for different types of pharmaceuticals than COF-1, and the adsorption capacity was ranked as follows: bisphenol pharmaceuticals > anti-inflammatory pharmaceuticals > sulfa pharmaceuticals. These results confirmed that COFs with larger pore sizes were more conducive to the adsorption of pollutants with smaller molecular dimensions. Moreover, COF-1 and COF-2 possessed excellent pH stability and recyclability, which suggested strong potential applications for these novel adsorbents in the remediation of organic pollutants in natural waterways and aqueous ecosystems.

Two imine-based covalent organic frameworks with different pore sizes were synthesized, and can be used as adsorbents for the removal of bisphenol pollutants, showing high affinity toward bisphenol S and bisphenol A.

Macroscopic Ultralight Aerogel Monoliths of Imine-based Covalent Organic Frameworks

The use of covalent organic frameworks (COFs) in practical applications demands shaping them into macroscopic objects, which remains challenging. Herein, we report a simple three-step method to produce COF aerogels, based on sol-gel transition, solvent-exchange, and supercritical CO₂ drying, in which 2D imine-based COF sheets link together to form hierarchical porous structures. The resultant COF aerogel monoliths have extremely low densities (ca. 0.02 g cm^-3 ), high porosity (total porosity values of ca. 99 %), and mechanically behave as elastic materials under a moderate strain (<25-35 %) but become plastic under greater strain. Moreover, these COF aerogels maintain the micro- and meso-porosity of their constituent COFs, and show excellent absorption capacity (e.g. toluene uptake: 32 g g^-1 ), with high removal efficiency (ca. 99 %). The same three-step method can be used to create functional composites of these COF aerogels with nanomaterials.

Integration of covalent organic frameworks into hydrophilic membrane with hierarchical porous structure for fast adsorption of metal ions

Covalent organic frameworks (COFs) including their preparation and application as research focus have attracted attention of researchers. Most of COFs exhibit the powder form, therefore they inevitably suffer many difficulties during use of catalysis, separation and so on. In previous study, our group have fabricated COF-based monoliths through ring-opening polymerization in which the micropores/mesopores of COF were easily blocked by unreacted monomer and solvent resulting in low specific surface area of COF-based monoliths. Herein, we designed and fabricated two kinds of hydrazone-linked COF-integrated chitosan membranes (CM@COF and COF@CM) with hierarchical porous structure using chitosan, poly(ethylene glycol) diglycidyl ether (PEGDE), 1,3,5-triformylphloroglucinol (TP), oxalyldihydrazide (ODH) in the presence of mesitylene and 1,4-dioxane, and acetic acid as catalyst. The resulting CM@COF is monolithic material to overcome disadvantages of COF powder, meanwhile it possessed hierarchical porous structure containing mesoporous and macroporous structure and higher specific surface area (117.4 m² g^-1) than chitosan membrane (0.4 m² g^-1). And the CM@COF was applied to adsorption of heavy metal ion, and its adsorption capacities for Cu(II) and Cr(VI) ions were 144 mg g^-1 (pH = 7) and 388 mg g^-1 (pH = 6), respectively, indicating that the CM@COF had potential for fast removal of heavy metal ions.

Orderly Porous Covalent Organic Frameworks-based Materials: Superior Adsorbents for Pollutants Removal from Aqueous Solutions

Covalent organic frameworks (COFs) are a new type of crystalline porous polymers known for chemical stability, excellent structural regularity, robust framework, and inherent porosity, making them promising materials for capturing various types of pollutants from aqueous solutions. This review thoroughly presents the recent progress and advances of COFs and COF-based materials as superior adsorbents for the efficient removal of toxic heavy metal ions, radionuclides, and organic pollutants. Information about the interaction mechanisms between various pollutants and COF-based materials are summarized from the macroscopic and microscopic standpoints, including batch experiments, theoretical calculations, and advanced spectroscopy analysis. The adsorption properties of various COF-based materials are assessed and compared with other widely used adsorbents. Several commonly used strategies to enhance COF-based materials' adsorption performance and the relationship between structural property and sorption ability are also discussed. Finally, a summary and perspective on the opportunities and challenges of COFs and COF-based materials are proposed to provide some inspiring information on designing and fabricating COFs and COF-based materials for environmental pollution management.

Reduction of particulate matter and volatile organic compounds in biorefineries: A state-of-the-art review

A biorefinery is an efficient approach to generate multiple bio-products from biomass. With the increasing demand for bioenergy and bio-products, biorefineries are essential industrial platforms that provide needed demand while significantly reducing greenhouse gas emissions. A biorefinery consists of various conversion technologies where particulate matter (PM) and volatile organic compounds (VOCs) are emitted. The released PM and VOCs pose detrimental health and environmental risks for society. Moreover, the projected rise of global bioenergy demand may lead to an increase in PM and VOCs from biorefineries. With the use of cleaner technologies and approaches, PM and VOCs can be avoided in biorefineries. The study presents the landscape of the research field through a bibliometric review of emissions from a biorefinery. A comprehensive review of works on the reduction of PM and VOCs in a biorefinery is outlined. The study includes a perspective of cleaner technologies and approaches utilized in biorefineries to mitigate these hazardous materials. The results reveal that the employment of life cycle assessment, safety assessment, and green chemistry processes can significantly reduce PM and VOC emissions as well as the consumption of hazardous substances in the biorefinery.

Covalent organic frameworks: an ideal platform for designing ordered materials and advanced applications

Covalent organic frameworks offer a molecular platform for integrating organic units into periodically ordered yet extended 2D and 3D polymers to create topologically well-defined polygonal lattices and built-in discrete micropores and/or mesopores.

Beyond Frameworks: Structuring Reticular Materials across Nano-, Meso-, and Bulk Regimes

Reticular materials are of high interest for diverse applications, ranging from catalysis and separation to gas storage and drug delivery. These open, extended frameworks can be tailored to the intended application through crystal-structure design. Implementing these materials in application settings, however, requires structuring beyond their lattices, to interface the functionality at the molecular level effectively with the macroscopic world. To overcome this barrier, efforts in expressing structural control across molecular, nano-, meso-, and bulk regimes is the essential next step. In this Review, we give an overview of recent advances in using self-assembly as well as externally controlled tools to manufacture reticular materials over all the length scales. We predict that major research advances in deploying these two approaches will facilitate the use of reticular materials in addressing major needs of society.

Covalent organic frameworks embedded membrane via acetic-acid-catalyzed interfacial polymerization for dyes separation: Enhanced permeability and selectivity

With the increasing demand of high water-quality, membrane filtration technologies are playing further important roles in water treatment owing to their small footprints, reduced use of chemicals and stable performances. However, the inherent permeability-selectivity trade-off is still a significant obstacle restricting the broad applications of membrane separation. Hydrophilic modification via doping nanoparticles into membranes is considered an effective solution to improve the permeability while maintaining selectivity. However, agglomeration of nanoparticles often results in inhomogeneity of the modified membranes. In this study, hybrid membranes with separated covalent organic framework (COF) particles that were uniformly embedded in the membrane surface pores were firstly fabricated via acetic-acid-catalyzed in situ synthesis. Owing to the ample hydrophilic chemical groups and tunable molecular transport channels in COFs, the modified membranes yielded almost twice higher water flux (about 200 L m^-2·h^-1·bar) than the pristine membranes with simultaneously enhanced rejection of water pollutants (i.e., dyes). In addition, the pure organic structure of COF improves the polymer-filler interaction of the mixed film, thereby reducing the risk of leakage. Therefore, the hybrid membranes also exhibited relatively high stability in long-term operations and different pH conditions, which makes them promising candidates in future membrane applications.

Removal of heavy metals and radionuclides from water using nanomaterials: current scenario and future prospects

There is an increase in concern about the hazardous effects of radioactivity due to the presence of undesirable radioactive substances in our vicinity. Nuclear accidents such as Chernobyl (1986) and Fukushima (2011) have further raised concerns towards such incidents which have led to contamination of water bodies. Conventional methods of water purification are less efficient in decontamination of radioisotopes. They are usually neither cost-effective nor environmentally friendly. However, nanotechnology can play a vital role in providing practical solutions to this problem. Nano-engineered materials like metal oxides, metallic organic frameworks, and nanoparticle-impregnated membranes have proven to be highly efficient in treating contaminated water. Their unique characteristics such as high adsorption capacity, large specific surface area, high tensile strength, and excellent biocompatibility properties make them useful in the field of water purification. This review explores the present status and future prospects of nanomaterials as the next-generation water purification systems that can play an important role in the removal of heavy metals and radioactive contaminants from aqueous solutions.

The magnetic covalent organic framework as a platform for high-performance extraction of Cr(VI) and bisphenol a from aqueous solution

The magnetic covalent organic framework with β-ketoenamine linkage (Fe₃O₄@COF(TpPa-1)) was fabricated by the hydrothermal method. The obtained Fe₃O₄@TpPa-1 integrated four advantages, namely easy preparation, high stability, excellent adsorption performance (485.2 m²/g) and good recoverability (19.5 emu/g), which enabled it an ideal sorbent for wastewater treatment. Fe₃O₄@TpPa-1 exhibited excellent adsorption capacities for Cr (VI) (245.45 mg/g) and bisphenol A (1220.97 mg/g). The adsorption kinetics and isotherms were in alignment to the pseudo-second-order and Langmuir model, respectively. After five times cycles, the adsorption capacity of Fe₃O₄@TpPa-1 still retained at a high level. According to Materials Studio simulation and XPS analysis, the adsorption mechanism was attributed to the presence of the homogeneously distributed imine and carbonyl functional groups in the framework of TpPa-1, allowing them to serve as platforms for anchoring heavy metals and organic pollutants. Besides, the hydrophobic skeleton structures of TpPa-1 endowed them good adsorption performance towards organic pollutants via hydrogen -bonding (NH^…O^…HO) and π-π interaction. Therefore, the recyclable Fe₃O₄@TpPa-1 showed a broad application prospects in environmental remediation.

Utilization of Ag nanoparticles anchored in covalent organic frameworks for mercury removal from acidic waste water

Metal nanoparticles (NPs) have high reaction rate and atom utilization with respect to pollutants in aqueous environments. However, the aggregation and instability in acidic solution limit their practical applications. Mercury removed from acidic solution are still a big problem. In this study, we used a tunable porous covalent organic framework (COF) material as a support for in situ growth of Ag NPs via a one-step solution infiltration method, to enhance the spatial dispersion of NPs and their stability in acidic solution, and for the first time studying the mercury adsorption performance. More importantly, the Ag NPs@COF composite exhibited high removal rate (99 %), ultrahigh Ag atom utilization (150 %), high selectivity and stability, and reusability for Hg(II) removal from acidic aqueous solutions. Meantime, through common characterizations and density functional theory calculations verifying the microscopic adsorption process, we found COF material played an important role in the entire purification process because it provided some electrons to Hg(II) ions via Ag NPs, finally generating an amalgam. Therefore, the present work not only provides a COF-supported Ag NPs material for Hg(II) ions removal from acidic waste water but also opens a new field of design of functionalized COFs material for applications in environmental pollutions control.

Adsorption Properties of Hydrated Cr3+ Ions on Schiff-base Covalent Organic Frameworks: A DFT Study

Considering the superior physiochemical property, increasing efforts have been devoted to exploiting the covalent organic frameworks (COFs) materials on the environmental remediation of heavy metal ions. Water pollution caused by Cr³⁺ metal ions is of special concern for scientists and engineers. Notwithstanding all the former efforts made, it is surprising that very little is known about the interaction mechanisms between the hydrated Cr³⁺ metal ions and COF materials. In present context, density functional theory (DFT) method is used to elucidate geometric and electronic properties with the purpose of putting into theoretical perspective the application values and interaction mechanisms for COF materials on Cr³⁺ capture. The results showed that all the five selected Schiff-base COFs materials displayed good adsorption performance on Cr³⁺ removal while the phenazine-linked and imine-COFs possessed the most favorable adsorption capacity due to the optimal chemical units and frameworks. The hydration effect was found to play a two-side role in the adsorption process and interaction mechanisms, involving coordination, hydrogen bonds, as well as weak non-covalent interactions, have been illuminated to explain the observed different adsorption behaviors. This study provides a general guidance for the design and selection of efficient COF materials as high-capacity Cr³⁺ adsorbents.

Synthesis of new imine-linked covalent organic framework as high efficient absorbent and monitoring the removal of direct fast scarlet 4BS textile dye based on mobile phone colorimetric platform

Synthesis of a high adsorption capacity material for pollutions removal is temping research and practical field due to increasing the environmental pollution in industrial communities. In this study, a new covalent organic framework based on triazine rings was synthesized and characterized by FT-IR spectra, X-ray diff ;raction pattern, elemental analysis, and nitrogen adsorption/desorption isotherm. Because of the nitrogen riched surface, mesoporous structure, and large surface area, the synthesized N-riched triazine-based COF had a super adsorption capacity. The adsorption properties were examined with the removal of DFS-4BS from textile wastewater. The effective parameter on adsorption performance and color removal processes such as pH, contact time, temperature, and adsorbent dosage were optimized with Central Composition Design. The optimum condition was pH 2; Temperature: 35 °C; Absorbent dosage: 0.01 g; and contact time: 360 min. The obtained maximum adsorption capacity was 8501 mg g^-1 (850 wt %) that indicates the super adsorption ability of synthesized N-riched TCOF. To reduce the colorimetric test price and develop the presented adsorbent for field applicability, a mobile phone colorimeter was constructed with accessible equipment and investigate the accuracy of that by comparing the data of mobile phones with the obtained result from UV-vis spectrometer.