Wide spectral degradation of Norfloxacin by Ag@BiPO4/BiOBr/BiFeO3 nano-assembly: Elucidating the photocatalytic mechanism under different light sources

Construction of a BiOI/ZnO heterojunction on biomass Juncus effusus fiber for photodegradation of organic pollutants

Semiconductor heterojunction engineering and three-dimensional (3D) architecture construction have been considered highly desirable strategies to enhance photocatalytic performance. Herein, a BiOI/ZnO composite photocatalyst with a 3D flower-like architecture was successfully prepared, which was stably immobilized on three-dimensional porous lignocellulosic biomass Juncus effusus (JE) fiber. The outstanding photocatalytic performance of the BiOI/ZnO-JE fiber was confirmed by the degradation of tetracycline hydrochloride (TC, 90%), ciprofloxacin (CIP, 79%), and norfloxacin (NOR, 81%). The enhanced photocatalytic activities were mainly attributed to the synergistic absorption performance of the lignocellulosic JE and the effective transfer and separation of charges. Moreover, the hydroxyl (·OH) and superoxide radicals (·O2-) are the main reactive species in the photocatalytic process according to the analysis. This work may provide a novel perspective for constructing high-performance lignocellulosic-based photocatalytic materials.

High-efficiency removal of microcystis aeruginosa using Z-scheme AgBr/NH2-MIL-125(Ti) photocatalyst with superior visible-light absorption: Performance insights and mechanisms

Algal blooms have become a widespread concern for drinking water production, threatening ecosystems and human health. Photocatalysis, a promising advanced oxidation process (AOP) technology for wastewater treatment, is considered a potential measure for in situ remediation of algal blooms. However, conventional photocatalysts often suffer from limited visible-light response and rapid recombination of photogenerated electron-hole pairs. In this study, we prepared a Z-scheme AgBr/NH2-MIL-125(Ti) composite with excellent visible light absorption performance using co-precipitation to efficiently inactivate Microcystis aeruginosa. The degradation efficiency of AgBr/NH2-MIL-125(Ti) for chlorophyll a was 98.7 % after 180 min of visible light irradiation, significantly surpassing the degradation rate efficiency of AgBr and NH2-MIL-125(Ti) by factors of 3.20 and 36.75, respectively. Moreover, the removal rate was maintained at 91.1 % even after five times of repeated use. The experimental results indicated that superoxide radicals (•O2-) were the dominant reactive oxygen species involved. The photocatalytic reaction altered the morphology and surface charge of algal cells, inhibited their metabolism, and disrupted their photosynthetic and antioxidant systems. In conclusion, this study presents a promising material for the application of photocatalytic technology in algal bloom remediation.

Efficient removal of tetracycline hydrochloride through novel Fe/BiOBr/Bi2WO6 photocatalyst prepared by dual-strategy under visible-light irradiation

It is important to investigate whether combining two modification strategies has a synergistic effect on the activity of photocatalysts. In this manuscript, Fe-doped BiOBr/Bi2WO6 heterojunctions were synthesized by a one-pot solvothermal method, and excellent photocatalytic performance was obtained for the degradation of tetracycline hydrochloride (TCH) in water without the addition of surfactant. Combining experiments and characterization, the synergistic effect between Fe ion doping and the BiOBr/Bi2WO6 heterojunction was elucidated. The Fe/BiOBr/Bi2WO6 composite photocatalyst had a beneficial void structure, enhanced visible light response, and could inhibit the recombination of photogenerated support well, which improved the photocatalytic activity. The presented experiments demonstrate that Fe/BiOBr/Bi2WO6 removes 97% of TCH from aqueous solution, while pure BiOBr and Bi2WO6 only remove 56% and 65% of TCH, respectively. Finally, the separation and transfer mechanisms of photoexcited carriers were determined in conjunction with the experimental results. This study provides a new direction for the design of efficient photocatalysts through the use of a dual co-modification strategy.

Enhanced generation of oxysulfur radicals by the BiOBr/Montmorillonite activated sulfite system: Performance and mechanism

The easily synthesized, cost-effective, and stable photocatalysts for sulfite activation are always required for the enhancement of organic contaminants degradation. Herein, the facile coprecipitation synthesis of Bismuth oxybromide (BiOBr)/Montmorillonite (MMT) was reported, which could activate sulfite (SO32-/HSO3-) under sunlight and accelerate the catalytic performance more effectively than pristine BiOBr. After adding sulfite to the photocatalysis system, the photodegradation efficiency of atrazine (ATZ) achieved 73.7% ± 1.5% after 5 min and 94.4% ± 1.6% after 30 min of sunlight irradiation with BiOBr/MMT. The BiOBr/MMT-sulfite system also presented remarkable photocatalytic performance to eliminate various contaminants, including ciprofloxacin, sulfadiazine, tetracycline, and carbamazepine. The various features of the photocatalyst materials were studied, including their surface morphology, structure, optical properties, and composition. The results illustrated that by adding MMT, the bandgap of the pristine BiOBr was reduced and the surface area was increased, which led to an increased ability to adsorb materials. Results of various influence factors showed this enhanced system had satisfactory and stable removal performance of ATZ in the pH range of 3.0-6.5, but HPO42- had a strong negative effect on the system performance. Oxysulfur radicals (SO5·- and SO4·-), h+, and 1O2 were discovered as the prevailing active species in the BiOBr/MMT-sulfite system. The proposed degradation mechanism of this photocatalyst-enhanced system revealed that sulfite adsorption on the surface of the photocatalyst played a vital role during the initial phase, and the degradation pathway of ATZ was discussed. This study provides a new synthesis strategy of a photocatalyst for sulfite activation and expands the potential uses of Bi-based photocatalysts in degrading difficult-to-remove organic pollutants.

Advancements in electrochemical technologies for the removal of fluoroquinolone antibiotics in wastewater: A review

In recent times, the need to make water safer and cleaner through the elimination of recalcitrant pharmaceutical residues has been the aim of many studies. Fluoroquinolone antibiotics such as ciprofloxacin, norfloxacin, enrofloxacin, and levofloxacin are among the commonly detected pharmaceuticals in wastewater. Since the presence of these pharmaceuticals in water bodies poses serious risks to living organisms, it is vital to adopt effective wastewater treatment techniques for their complete removal. Electrochemical technologies such as photoelectrocatalysis, electro-Fenton, electrocoagulation, and electrochemical oxidation have been established as techniques capable of the complete removal of organics including pharmaceuticals from wastewater. Hence, this review presents discussions on the recent progress (literature within 2018-2022) in the applications of common electrochemical processes for the degradation of fluoroquinolone antibiotics from wastewater. The fundamentals of these processes are highlighted while the results obtained using the processes are critically discussed. Furthermore, the inherent advantages and limitations of these processes in the mineralization of fluoroquinolone antibiotics are clearly emphasized. Additionally, appropriate recommendations are made toward improving electrochemical technologies for the complete removal of these pharmaceuticals with minimal energy consumption. Therefore, this review will serve as a bedrock for future researchers concerned with wastewater treatments to make informed decisions in the selection of suitable electrochemical techniques for the removal of pharmaceuticals from wastewater.

Synthesis of triethylenetetramine modified sodium alginate/CuS nanocrystal composite for enhanced Cr(VI) removal: Performance and mechanism

Photocatalysis has been widely used for the removal of hexavalent chromium from wastewater as an efficient and environmental friendly method. However, conventional photocatalysts generally exhibit poor adsorption properties toward Cr(VI), resulting in unsatisfactory performance in high concentrated wastewaters. In this study, we synthesized a novel composite material with high Cr(VI) adsorption ability by blending prepared CuS nanocrystals into triethylenetetramine modified sodium alginate for the enhanced photocatalytic removal of Cr(VI). Effect of CuS dosage, pH value, light source and intensity were discussed for the optimum Cr(VI) removal conditions. The synthesized composite has shown good adsorption performance toward Cr(VI) and the overall removal rate reached 98.99 % within 50 min under UV light irradiation with citric acid as hole scavenger. Adsorption isotherm, thermodynamics, and kinetics with corresponding model fitting were discussed, which suggested that the monolayer and chemical adsorption dominated the adsorption process. Characterization results indicated that amino and hydroxyl groups contributed electrons in the photocatalysis reaction for the reduction of Cr(VI) to Cr(III). CuS nanocrystals can enhance the surface charge and light absorbance ability of the composite, and the Cr(VI) removal was governed by electrostatic interaction and photo-induced redox reaction.

The Strengthened Photocatalytic NOx Removal of Composites Bi4O5Br2/BiPO4: The Efficient Regulation of Interface Carriers by Integrating a Wide-Bandgap Ornament

A series of binary composites Bi₄O₅Br₂/BiPO₄ (PBX) was fabricated through a simple mechanical ball milling protocol. Relevant microstructural, morphological, and optical properties were thoroughly analyzed via various techniques. The integration of both components was confirmed to produce heterojunction domains at the phase boundaries. Upon exposure to visible light irradiation, the as-achieved PBX series possessed the reinforced photocatalytic NO_x removal efficiencies and the weakened generation of toxic intermediate NO₂ in comparison to both bare components, chiefly attributed to the efficient transport and separation of carriers and boosted production of superoxide radicals (·O₂^-) through the combination of a wide-bandgap ornament BiPO₄ as an electron acceptor. In particular, the composite PB5 with the optimal phase composition exhibited the highest NO_x removal of 40% with the lowest NO₂ formation of 40 ppb among all tested candidates. According to the band structures' estimation and reactive species' detection, a reasonable mechanism was ultimately proposed to describe the migration of charge carriers and the enhancement of photocatalytic performance.

A review on the progress of the photocatalytic removal of refractory pollutants from water by BiOBr-based nanocomposites

Organic matters from various sources such as the manufacturing, agricultural, and pharmaceuticals industries is continuously discharged into water bodies, leading to increasingly serious water pollution. Photocatalytic technology is a clean and green advanced oxidation process, that can successfully decompose various organic pollutants into small inorganic molecules such as carbon dioxide and water under visible light irradiation. Bismuth oxybromide (BiOBr) is an attractive visible light photocatalyst with good photocatalytic performance, suitable forbidden bandwidth, and a unique layered structure. However, the rapid combination of the electron-hole pairs generated in BiOBr leads to low photocatalytic activity, which limits its photocatalytic performance. Due to its unique electronic structure, BiOBr can be coupled with a variety of different functional materials to improve its photocatalytic performance. In this paper, We present the morphologically controllable BiOBr and its preparation process with the influence of raw materials, additives, solvents, synthesis methods, and synthesis conditions. Based on this, we propose design synthesis considerations for BiOBr-based nanocomplexes in four aspects: structure, morphology and crystalline phase, reduction of electron-hole pair complexation, photocorrosion resistance, and scale-up synthesis. The literature on BiOBr-based nanocomposites in the last 10 years (2012-2022) are summarized into seven categories, and the mechanism of enhanced photocatalytic activity of BiOBr-based nanocomposites is reviewed. Moreover, the applications of BiOBr-based nanocomposites in the fields of degradation of dye wastewater, antibiotic wastewater, pesticide wastewater, and phenol-containing wastewater are reviewed. Finally, the current challenges and prospects of BiOBr-based nanocomposites are briefly described. In general, this paper reviews the construction of BiOBr-based nanocomposites, the mechanism of photocatalytic activity enhancement and its research status and application prospects in the degradation of organic pollutants.

Removal of Tetracycline Hydrochloride from Water by Visible-Light Photocatalysis Using BiFeO3/BC Materials

It is widely considered that photocatalysis is an effective and eco-friendly method of dealing with organic pollutants dissolved in water. Nonetheless, photocatalysts still have some drawbacks, such as poor visible-light absorption, easy recombination of photogenerated charge carriers, and limited active sites. In this study, bismuth ferrite coupled with biochar material (BiFeO3/BC) was simply synthesized, and its photocatalysis reactivity was systemically examined under an irradiation of λ > 400 nm. The experimental results showed that under a relatively acidic environment, the removal rate of tetracycline hydrochloride reached 95%. Using a variety of characterization investigations, we analyzed the morphology structure and chemical composition of BiFeO3/BC. In consideration of simple preparation and high respondence toward visible light, further explorations of BiFeO3/BC and its properties and optimized degradation conditions are worthwhile.

Carbon Quantum Dots Bridged TiO2/CdIn2S4 toward Photocatalytic Upgrading of Polycyclic Aromatic Hydrocarbons to Benzaldehyde

Conversion of hazardous compounds to value-added chemicals using clean energy possesses massive industrial interest. This applies especially to the hazardous compounds that are frequently released in daily life. In this work, a S-scheme photocatalyst is optimized by rational loading of carbon quantum dots (CQDs) during the synthetic process. As a bridge, the presence of CQDs between TiO₂ and CdIn₂S₄ improves the electron extraction from TiO₂ and supports the charge transport in S-scheme. Thanks to this, the TiO₂/CQDs/CdIn₂S₄ presents outstanding photoactivity in converting the polycyclic aromatic hydrocarbons (PAHs) released by cigarette to value-added benzaldehyde. The optimized photocatalyst performs 87.79% conversion rate and 72.76% selectivity in 1 h reaction under a simulated solar source, as confirmed by FT-IR and GC-MS. A combination of experiments and theoretical calculations are conducted to demonstrate the role of CQDs in TiO₂/CQDs/CdIn₂S₄ toward photocatalysis.

Deciphering the internal mechanisms of ciprofloxacin affected anaerobic digestion, its degradation and detoxification mechanism

Ciprofloxacin (CIP) is widely used in livestock farms, but the internal mechanism of the effect of residual CIP in actual livestock wastewater on anaerobic digestion (AD) performance remains unknown. This study examined the dose-specific effects of CIP (0.5-2 mg/L) on livestock wastewater AD by analyzing acidogenesis and methanogenesis. 0.5 mg/L CIP promoted methane production by facilitating acidogenesis and acetogenesis. Compared with the control, the cumulative methane production increased from 331.38 to 407.44 mL/g VS at a dose of 0.5 mg/L, an increase of 22.95 %. However, as the dose of CIP increased, the cumulative methane production gradually decreased to 217.64 mL/g VS (2 mg/L). Microbial community analysis revealed that CIP had the greatest impact on methane production by influencing the activity of acidogenic bacteria. Meanwhile, acidogenesis was critical for CIP degradation. In acidogenesis, hydroxylation, amination, defluorination, decarboxylation, and piperazine ring breaking not only degraded CIP but also reduced its toxicity. Therefore, a large number of intermediates could be continuously degraded by microorganisms. However, as the dosage of CIP increased, the ability of microorganisms to degrade intermediates decreased.

Construction of the Photocatalytic Film of the Recyclable TaON/Nickel Foam with Ohmic Junction for Efficient Wastewater Treatment

A recyclable photocatalytic film of TaON/Ni foam with ohmic junction is prepared by the electrophoretic deposition technology. The photocatalytic film of 60 mg TaON/Ni foam demonstrates excellent photocatalytic activity and recycling performance for the degradation of basic fuchsin from water. Around 80% of basic fuchsin (50 mL, 10 mg L−1) is removed over 60 mg TaON/Ni foam under irradiation of 72 W LED white light for 5 h. The photocatalytic activity of the film does not significantly decrease after three rounds of use. The active species for the photocatalytic degradation of basic fuchsin are ·O2−, h+ and ·OH.

Highly efficient photocatalytic degradation of norfloxacin via Bi2Sn2O7/PDIH Z-scheme heterojunction: Influence and mechanism

The severe pollution caused by antibiotics has prompted considerable concerns in recent decades. In this study, the Bi₂Sn₂O₇/PDIH Z-scheme heterojunction photocatalyst was synthesized and highly photocatalytic activity on norfloxacin was obtained. The degradation of norfloxacin reached 98.71% in 90 min under visible light. The apparent rate constant of norfloxacin (0.4 903 min^-1) was 3.65 and 20 times that of PDIH and the Bi₂Sn₂O₇. Meanwhile, XPS, electrochemical, Photoluminescence spectroscopy and electron paramagnetic resonance results showed that Z-scheme charge-transfer process facilitated the spatial carrier separation and preserve redox capability. Furthermore, the degradation intermediates of norfloxacin and their toxicities were evaluated. Finally, in the view of the survey about the impact of different water matrices, it was found that the Bi₂Sn₂O₇/PDIH maintained high efficiency in raw natural water. This work enriched inorganic/organic heterojunction engineering for PDIH, and provided the enormous potential for combining the Bi₂Sn₂O₇ with PDIH to address the antibiotic pollution issues in the actual water treatment.

Characterization Methodology and Activity Evaluation of Solar-Driven Catalysts for Environmental Remediation

Solar-driven photocatalysis mediated by semiconductors has been rapidly developed as a green and sustainable technology for environmental remediation. Continuous efforts have been devoted to novel semiconducting photocatalysts to boost the efficiency of the photocatalytic system. However, controversy has widely existed in materials characterization and photocatalytic activity evaluation. This review overviews the recent advances in characterization methodology and photocatalytic activity evaluation of solar-driven catalysts (SDCs) for environmental remediation. After a general and brief introduction of different SDCs, the compositional, structural, and optical characterizations of SDCs are summarized. Moreover, the characterization methods and challenges in the doped and coupled SDCs are discussed. Finally, the challenges in the evaluation of current evaluation methods for the photocatalytic activity of SDCs are highlighted.

Enhanced Ciprofloxacin Removal from Aqueous Solution Using a Chemically Modified Biochar Derived from Bamboo Sawdust: Adsorption Process Optimization with Response Surface Methodology

Contamination of water by ciprofloxacin has become a significant concern due to its adverse health effects and growing evidence of antimicrobial-resistant gene evolution. To this end, a chemically modified bamboo biochar was prepared from bamboo sawdust to effectively remove ciprofloxacin (CIP) from an aqueous solution. Under similar adsorption conditions, the modified bamboo biochar (MBC) has an excellent CIP removal efficiency (96%) compared to unmodified bamboo biochar (UBC) efficiency (45%). Thus, MBC was used in batch adsorption experiments, and the process was optimized with the central composite design (CCD) framework of response surface methodology (RSM). Sorption process parameters such as initial CIP concentration, pH, adsorbent dose, and contact time were studied and found to have a significant effect on CIP removal. The optimal CIP removal (96%) was obtained at MBC dose (0.5 g L-1), CIP initial concentration (20 mg L-1), pH (7.5), and contact time (46 min). The adsorption kinetic data were well described by the pseudo-second-order model ( $R^2=0.999$ ), and both Langmuir ( $R^2=0.994$ ) and Freundlich ( $R^2=0.972$ ) models gave the best fit in CIP adsorption isotherm analysis. The maximum monolayer adsorption capacity of the MBC was 78.43 mg g-1 based on the Langmuir isotherm model. These results suggest that CIP adsorption was mainly controlled by chemisorption. Moreover, the CIP adsorption process was endothermic and spontaneous. Overall, MBC is a low-cost, efficient, and recyclable adsorbent for eliminating emerging contaminants such as ciprofloxacin from an aqueous solution.

Nano Metal-Containing Photocatalysts for the Removal of Volatile Organic Compounds: Doping, Performance, and Mechanisms

Volatile organic compounds (VOCs) in indoor air are considered a major threat to human health and environmental safety. The development of applicable technologies for the removal of VOCs is urgently needed. Nowadays, photocatalytic oxidation (PCO) based on metal-containing photocatalysts has been regarded as a promising method. However, unmodified photocatalysts are generally limited in applications because of the narrow light response range and high recombination rate of photo-generated carriers. As a result, nano metal-containing photocatalysts doped with elements or other materials have attracted much attention from researchers and has developed over the past few decades. In addition, different doping types cause different levels of catalyst performance, and the mechanism for performance improving is also different. However, there are few reviews focusing on this aspect, which is really important for catalyst design and application. This work aims to give a comprehensive overview of nano metal-containing photocatalysts with different doping types for the removal of VOCs in an indoor environment. First, the undoped photocatalysts and the basic mechanism of PCO is introduced. Then, the application of metal doping, non-metal doping, co-doping, and other material doping in synthetic metal-containing photocatalysts are discussed and compared, respectively, and the synthesis methods, removal efficiency, and mechanisms are further investigated. Finally, a development trend for using nano metal-containing photocatalysts for the removal of VOCs in the future is proposed. This work provides a meaningful reference for selecting effective strategies to develop novel photocatalysts for the removal of VOCs in the future.

ZrO2-Ag2O nanocomposites encrusted porous polymer monoliths as high-performance visible light photocatalysts for the fast degradation of pharmaceutical pollutants

This work reports a unique ZrO₂-Ag₂O heterojunction nanocomposite uniformly dispersed on a macro-/meso-porous polymer monolithic template to serve as simple and effective visible light-driven heterogeneous plasmonic photocatalysts for water decontamination. The monolithic photocatalysts' structural properties and surface morphology are characterized using various surface and structural characterization techniques. The photocatalytic performance of the proposed photocatalysts is evaluated by optimizing multiple operational parameters. The photocatalytic properties of the fabricated monolithic nanocomposite are monitored through time-dependent photocatalytic disintegration of norfloxacin drug, a widely employed antimicrobial, with considerable aquatic persistence. The analytical results conclude that a (60:40) ZrO₂-Ag₂O nanocomposite embedded polymer monolith exhibits superior photocatalytic activity for the complete mineralization of norfloxacin molecules under optimized conditions of solution pH (3.0), photocatalyst quantity (100 mg), pollutant concentration (15 mg/L), photosensitizers (2.0 mM KBrO₃), visible light intensity (300 W/cm² tungsten lamp) and irradiation time (≤ 1 h). The proposed new-age inorganic-organic hybrid visible light photo-catalysts with superior structural and surface properties exhibit brilliant performance and fast responsiveness for water decontamination applications, in addition to their excellent chemical stability, high durability, multi-reusability, and cost-effectiveness.

Plasmonic Ag nanoparticles decorated copper-phenylacetylide polymer for visible-light-driven photocatalytic reduction of Cr(VI) and degradation of PPCPs: Performance, kinetics, and mechanism

The development of efficacious photocatalysts for the elimination of contaminants in water remains a challenge. Herein, a promising Ag nanoparticles-decorated copper-phenylacetylide (Ag/PhC₂Cu) plasmonic photocatalyst was fabricated for the reduction of hexavalent chromium (Cr(VI)) and degradation of pharmaceutical and personal care products (PPCPs). Typically, the optimized 5Ag/PhC₂Cu could rapidly reduce Cr(VI) (98.1% within 12 min), and degrade norfloxacin (NOR) (100% within 40 min) with a 56.2% mineralization rate under visible light. The superior photocatalytic activity of Ag/PhC₂Cu was attributed to the synergistic effects of the highly reducing photoinduced electrons conferred by the PhC₂Cu (-1.98 eV), and Ag nanoparticles in promoting photocarrier separation and enhancing solar-energy-conversion efficiencies. Subsequently, the photocatalytic reaction mechanism of Ag/PhC₂Cu was investigated. It was found that e^- and O₂^•- were the main reactive species for Cr(VI) reduction, while O₂^•- and h⁺ were primarily responsible for the degradation of NOR. Of note, the Ag/PhC₂Cu system could effectively generate H₂O₂ and partially decomposed it to •OH, which might be involved in NOR mineralization. This study not only demonstrates a highly active photocatalytic system for the remediation of environmental pollution and sustainable solar-to-chemical energy conversion, but contributes to the future exploration of multifunctional plasmonic photocatalysts.

Construction of a novel two-dimensional AgBiO3/BiOBr step-scheme heterojunction for enhanced broad-spectrum photocatalytic performance

Efficient S-scheme heterojunction photocatalysts were prepared through in situ growth of AgBiO3 on BiOBr.

Synthetic BiOBr/Bi2S3/CdS Crystalline Material and Its Degradation of Dye under Visible Light

Constructing heterojunction has attracted widespread concerns in photocatalysis research. BiOBr/Bi2S3/CdS composite material with a sea urchin shape was directly obtained by first synthesizing BiOBr microspheres. The morphology, structure and composition of the composite material were characterized by XRD, EDX, SEM and XPS. Dye degradation experiments showed that 83.3% of methylene blue removal was achieved after 2 h of visible light irradiation. The reaction rate under optimal conditions was 0.014 min−1 and the photocatalytic degradation process follows a pseudo-first-order kinetic model. Based on the EPR test results, the main active species involved in the reaction were •O2− and h+. The conduction band and valence band edge potential calculations confirmed the key role of CdS in the production of •O2−.

Cocatalysts from types, preparation to applications in the field of photocatalysis

With the rapid development of society, the burden of energy and the environment is becoming more and more serious. Photocatalytic hydrogen production, the photosynthesis of organic fuel, and the photodegradation of pollutants are three effective ways to reduce these burdens using semiconductor photocatalysts. To improve the reaction efficiency of photocatalysts, a small amount of cocatalyst is often added when photocatalysts participate in the synthesis or decomposition reaction. The addition of this small amount of cocatalyst is like a finishing touch, significantly increasing the activity of the photocatalysts. However, in our common study of photocatalysis, we often pay attention to the study of photocatalysts but ignore the study of cocatalysts. Herein, we summarize the recent application research on cocatalysts in the field of photocatalysis, starting from the types, preparation methods, and reaction mechanisms among others, to remind researchers of the matters needing attention when using cocatalysts.

Effects of natural colloidal particles derived from a shallow lake on the photodegradation of ofloxacin and ciprofloxacin

Natural colloidal particles (NCPs), which are ubiquitous and abundant in surface waters, may play a crucial role in the sunlight-driven transformation of organic contaminants. This research focused on the effects of NCPs on the photodegradation of two fluoroquinolone antibiotics (FQs), ofloxacin (OFL) and ciprofloxacin (CIP), and assessed the photosensitivity of colloidal organic matter (COM). Results showed that the photodegradation rate constants (k_obs) of OFL and CIP in NCP solutions ranged from 9.28 × 10^-2 h^-1 to 15.98 × 10^-2 h^-1 and 63.88 × 10^-2 h^-1 to 196.59 × 10^-2 h^-1, respectively, and NCPs can significantly accelerate the photodegradation rate of OFL and CIP. Indirect photodegradation (IP) accounted for >50% of the overall observed degradation in most treatments and was the dominant degradation pathway for the two FQs, especially for CIP, for which IP reached 82%-94%. In the IP process, the contributions of triplet states of colloidal organic matter (³COM^⁎) to the photolysis of OFL and CIP were close to 42% and 46%, respectively. The compositions of COM played an important role in the IP of the FQs, among which terrestrial sources of COM tended to have higher photoreactivity than biological sources. This study is essential in predicting the photochemical effect of FQs and also allows for a better understanding of the real environmental fate of antibiotic contaminants.

Enhanced visible light-driven photocatalysis of iron-oxide/titania composite: Norfloxacin degradation mechanism and toxicity study

A simulated visible light-mediated iron oxide-titania (IoT) nanocomposite was employed to degrade the antibiotic norfloxacin (NFN) photocatalytically. The photocatalyst were prepared using a sol-gel method with controlled titania loadings to iron oxide by altering the fabrications step. The nanocomposites were structurally characterized by field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), field emission high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, Diffuse reflectance UV-visible spectra (DRS-UV) spectroscopy, cyclic voltammetry, and X-ray photoelectron spectroscopy (XPS). It was observed that 100 mg/L of iron oxide doped titania loading at 1:4 (IoT-4) achieved the maximum photocatalytic activity in a 75 mg/100 mL of NFN solution within 60 min of the reaction time under visible light irradiation. The NFN degradation mechanism affirmed using HPLC-MS/MS analysis and the results confirmed the complete NFN degradation without residual intermediates. Significant, sustained recyclability was obtained by completely removing the contaminant up to 5 cycles with 90% degradation ability till nine cycles. Bacterial- and phytotoxicity data ascertain that the photocatalyzed and contaminant-free water is safe for the environment. The outstanding photocatalytic performance in removing organic pollutants indicates the potential application of IoT nanocomposites in real-time environmental remediation.

A reusable chitosan/TiO2@g-C3N4 nanocomposite membrane for photocatalytic removal of multiple toxic water pollutants under visible light

Photocatalysis has been proved to be a promising approach in wastewater purification. However, it is hard to recycle powdery photocatalysts from wastewater in industry, but immobilizing them using larger materials can overcome this drawback. For that reason, TiO₂@g-C₃N₄ was embedded into chitosan to synthesize a highly reusable and visible-light-driven chitosan/TiO₂@g-C₃N₄ nanocomposite membrane (CTGM). CTGM showed enhanced photoactivity and the photocatalytic efficiencies of the toxic water pollutants methyl orange (M.O.), rhodamine B (Rh.B), chromium (VI) (Cr (VI)), 2,4-dichlorophenol (2,4-DCP) and atrazine (ATZ) were more than 90% under visible light at ambient conditions. Significantly, CTGM was easy to recycle and showed excellent reusability: there was no decrease in the photocatalytic decolorization efficiency of Rh.B throughout 10 cycles. A continuous-flow photocatalysis system was set up and 90% of Rh.B was effectively decolorized. A simple approach was developed to prepare a novel, effective and visible-light-driven membrane that was easy to reuse, and a feasible photocatalysis continuous-flow system was designed to be a reference for wastewater treatment in industry.

Robust magnetic ZnO-Fe2O3 Z-scheme hetereojunctions with in-built metal-redox for high performance photo-degradation of sulfamethoxazole and electrochemical dopamine detection

This work reports synthesis of a dual-function facile heterojunction and investigation of role of the charge transfer dynamism between individual semiconductor components for superior photocatalytic and electrochemical sensing application. The bio-benevolent and sturdy ZnO/Fe₂O₃ heterojunctions were utilized for visible light facilitated photo-degradation of sulfamethoxazole (SMX) antibiotic and electrochemical sensing of dopamine drug (DA). The fabricated heterojunction were characterized for structural, optical, and magnetic properties. Structural studies revealed the formation of nano heterojunction containing both phases. Magnetic studies confirmed the highly pure magnetic nature of photocatalysts. ZnO/30 wt%Fe₂O₃ heterojunction (S2) shows 95.2% SMX degradation under visible light and high retention of performance under solar light. The scavenging experiments infer that OH radicals are the active species responsible for degradation. A Z-scheme photocatalytic mechanism was predicted for higher performance with protection of high potential VB of ZnO and CB of Fe₂O₃ for high generation of reactive oxygen species. LC-MS was employed to predict a plausible degradation route. The sample modified glassy carbon electrodes (GCE) were used for electrochemical sensing of dopamine via cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The S2 junction exhibited 0.18 μM limit of detection with concentration range of 1 μM-50 μM. The stability test was successfully carried out at room temperature for 15 days. In addition, the S2 modified electrodes were spiked in real urine samples and good results were obtained. DPV reveals that S2 modified electrode is best sensor for dopamine sensing among all synthesized heterojunctions. The detection mechanism was also discussed in detail. The in-built metal redox i.e Zn²⁺/Zn⁺ and Fe³⁺/Fe²⁺ facilitate the Z-scheme transfer, improve the charge transfer capacity and reduce the recombination. This study is beneficial because it reports utilization of popular and well-tested semiconductor metal oxides to form heterojunctions with dual capabilities of environmental detoxification and cost-effective electrochemical detection of biomolecules.

Degradation of norfloxacin by hydroxylamine enhanced fenton system: Kinetics, mechanism and degradation pathway

This study demonstrated a fast and efficient degradation of a typical antibiotic norfloxacin (NOR) in a hydroxylamine enhanced Fenton (HA-Fenton) system, which showed a higher catalytic activity over a wider pH range (3.0-9.0). The removal efficiency of NOR was 96% at following conditions: 10 mg/L NOR, 10 μM Fe²⁺, 1.0 mM H₂O₂, 0.4 mM HA and pH 5.0. The degradation rate of NOR in the HA-Fenton system (0.23 min^-1) was 10.9 times of that (0.021 min^-1) in Fenton system. The addition of HA to Fenton system accelerated the conversion of Fe³⁺ to Fe²⁺, leading to the high concentration of ·OH in the HA-Fenton system. Ten degradation transformation products were detected by ultra-performance liquid chromatography tandem quadrupole time of flight mass spectrometer (UPLC-QTOF-MS), consequently, three main degradation steps were proposed, including defluorination, quinolone group transformation, and defluorination and piperazinyl ring opening. Further analyses of NO₃^-, NO₂^- and F^- after the reaction indicated that defluorination process was the crucial degradation step. The HA-Fenton system might offer an efficient alternative for degradation of antibiotics in wastewater.

Enhanced the photoelectrochemical performance of Bi2XO6 (X = W, Mo) for detecting hexavalent chromium by modification of CuS

In this work, Bi₂XO₆ (X = W, Mo) are synthesized at different temperatures. The results of tests find the optimal temperatures of Bi₂WO₆ and Bi₂MoO₆ are 180 and 160°C (BW-180, BM-160). Then, BW-180 and BM-160 are further compounded with different contents of CuS. The results of photoelectrochemical (PEC) tests show that CuS can improve the PEC performance of semiconductor materials, and it has better performance when CuS mass fraction is 5%. These maybe the photoelectron potentials generated by CuS/Bi₂XO₆ (X = Mo, W) heterojunction reduce the combination of photogenerated electrons and holes. When the PEC sensor based on 5%-CuS/BW-180 detects Cr(VI), it has a linear range of 1-80 μmol/L with detection limit of 0.95 μmol/L, while the PEC sensor based on 5%-CuS/BM-160 detects Cr(VI) has a linear range of 0.5-230 μmol/L and a detection limit of 0.12 μmol/L. Thus, 5%-CuS/Bi₂XO₆ has potential application in hexavalent chromium detection.