Incorporation of UiO-66-NH2 MOF into the PAN/chitosan nanofibers for adsorption and membrane filtration of Pb(II), Cd(II) and Cr(VI) ions from aqueous solutions

High-precision Helicobacter pylori infection diagnosis using a dual-element multimodal gas sensor array

Helicobacter pylori (H. pylori) is a globally widespread bacterial infection. Early diagnosis of this infection is vital for public and individual health. Prevalent diagnosis methods like the isotope 13C or 14C labelled urea breath test (UBT) are not convenient and may do harm to the human body. The use of cross-response gas sensor arrays (GSAs) is an alternative way for label-free detection of metabolite changes in exhaled breath (EB). However, conventional GSAs are complex to prepare, lack reliability, and fail to discriminate subtle changes in EB due to the use of numerous sensing elements and single dimensional signal. This work presents a dual-element multimodal GSA empowered with multimodal sensing signals including conductance (G), capacitance (C), and dissipation factor (DF) to improve the ability for gas recognition and H. pylori-infection diagnosis. Sensitized by poly(diallyldimethylammonium chloride) (PDDA) and the metal-organic framework material NH2-UiO66, the dual-element graphene oxide (GO)-composite GSAs exhibited a high specific surface area and abundant adsorption sites, resulting in high sensitivity, repeatability, and fast response/recovery speed in all three signals. The multimodal sensing signals with rich sensing features allowed the GSA to detect various physicochemical properties of gas analytes, such as charge transfer and polarization ability, enhancing the sensing capabilities for gas discrimination. The dual-element GSA could differentiate different typical standard gases and non-dehumidified EB samples, demonstrating the advantages in EB analysis. In a case-control clinical study on 52 clinical EB samples, the diagnosis model based on the multimodal GSA achieved an accuracy of 94.1%, a sensitivity of 100%, and a specificity of 90.9% for diagnosing H. pylori infection, offering a promising strategy for developing an accurate, non-invasive and label-free method for disease diagnosis.

Molecular Simulation Studies of Pharmaceutical Pollutant Removal (Rosuvastatin and Simvastatin) Using Novel Modified-MOF Nanostructures (UIO-66, UIO-66/Chitosan, and UIO-66/Oxidized Chitosan)

The ubiquitous presence of pharmaceutical pollutants in the environment significantly threatens human health and aquatic ecosystems. Conventional wastewater treatment processes often fall short of effectively removing these emerging contaminants. Therefore, the development of high-performance adsorbents is crucial for environmental remediation. This research utilizes molecular simulation to explore the potential of novel modified metal-organic frameworks (MOFs) in pharmaceutical pollutant removal, paving the way for the design of efficient wastewater treatment strategies. Utilizing UIO-66, a robust MOF, as the base material, we developed UIO-66 functionalized with chitosan (CHI) and oxidized chitosan (OCHI). These modified MOFs' physical and chemical properties were first investigated through various characterization techniques. Subsequently, molecular dynamics simulation (MDS) and Monte Carlo simulation (MCS) were employed to elucidate the adsorption mechanisms of rosuvastatin (ROSU) and simvastatin (SIMV), two prevalent pharmaceutical pollutants, onto these nanostructures. MCS calculations demonstrated a significant enhancement in the adsorption energy by incorporating CHI and OCHI into UIO-66. This increased ROSU from -14,522 to -16,459 kcal/mol and SIMV from -17,652 to -21,207 kcal/mol. Moreover, MDS reveals ROSU rejection rates in neat UIO-66 to be at 40%, rising to 60 and 70% with CHI and OCHI. Accumulation rates increase from 4 Å in UIO-66 to 6 and 9 Å in UIO-CHI and UIO-OCHI. Concentration analysis shows SIMV rejection surges from 50 to 90%, with accumulation rates increasing from 6 to 11 Å with CHI and OCHI in UIO-66. Functionalizing UIO-66 with CHI and OCHI significantly enhanced the adsorption capacity and selectivity for ROSU and SIMV. Abundant hydroxyl and amino groups facilitated strong interactions, improving performance over that of unmodified UIO-66. Surface functionalization plays a vital role in customizing the MOFs for pharmaceutical pollutant removal. These insights guide next-gen adsorbent development, offering high efficiency and selectivity for wastewater treatment.

Functionalized Ionic Liquids-Modified Metal-Organic Framework Material Boosted the Enzymatic Performance of Lipase

The development of immobilized enzymes with high activity and stability is critical. Metal-organic frameworks (MOFs) have attracted much academic and industrial interest in the field of enzyme immobilization due to their unique properties. In this study, the amino-functionalized ionic liquid (NIL)-modified metal-organic framework (UiO-66-NH2) was prepared to immobilize Candida rugosa lipase (CRL), using dialdehyde starch (DAS) as the cross-linker. The results of the Fourier transform infrared (FT-IR) spectra, X-ray powder diffraction (XRD), and scanning electronic microscopy (SEM) confirmed that the NIL was successfully grafted to UiO-66-NH2. The CRL immobilized on NIL-modified UiO-66-NH2 (UiO-66-NH2-NIL-DAS@CRL) exhibited satisfactory activity recovery (79.33%), stability, reusability, and excellent organic solvent tolerance. The research results indicated that ionic liquid-modified UiO-66-NH2 had practical potential for application in enzyme immobilization.

Core-shell design of UiO66-Fe3O4 configured with EDTA-assisted washing for rapid adsorption and simple recovery of heavy metal pollutants from soil

The coupling of washing with adsorption process can be adopted for the treatment of soils contaminated with heavy metals pollution. However, the complex environment of soil and the competitive behavior of leaching chemicals considerably restrain adsorption capacity of adsorbent material during washing process, which demands a higher resistance of the adsorbents to interference. In this study, we synthesized strongly magnetic, high specific surface area (573.49 m2/g) UiO66 composites (i.e., UiO66-Fe3O4) using hydrothermal process. The UiO66-Fe3O4 was applied as an adsorbent during the ethylene diamine tetraacetic acid (EDTA)-assisted washing process of contaminated soil. The incorporation of UiO66-Fe3O4 results in rapid heavy metal removal and recovery from the soil under low concentrations of washing agent (0.001 mol/L) with reduced residual heavy metal mobility of soil after remediation. Furthermore, UiO66-Fe3O4 can quickly recollect by an external magnet, which offers a simple and inexpensive recovery method for heavy metals from contaminated soil. Overall, UiO66-Fe3O4 configuration with EDTA-assisted washing process showed opportunities for heavy metals contaminated sites.

Integration of metal organic framework nanoparticles into sodium alginate biopolymer-based three-dimensional membrane capsules for the efficient removal of toxic metal cations from water and real sewage

Sodium alginate (SA) biopolymer has been recognized as an efficient adsorbent material owing to their unique characteristics, including biodegradability, non-toxic nature, and presence of abundant hydrophilic functional groups. Accordingly, in the current research work, UiO-66-OH and UiO-66-(OH)2 metal organic framework (MOF) nanoparticles (NPs) have been integrated into SA biopolymer-based three-dimensional (3-D) membrane capsules (MCs) via a simple and facile approach to remove toxic metal cations (Cu2+ and Cd2+) from water and real sewage. The newly configured capsules were characterized by FTIR, SEM, XRD, EDX and XPS analyses techniques. Exceptional sorption properties of the as-developed capsules were ensured by evaluation of the pertinent operational parameters, i.e., contents of MOF-NPs (1-100 wt%), adsorbent dosage (0.001-0.05 g), content time (0-360 h), pH (1-8), initial concentration of metal cations (5-1000 mg/L) and reaction temperature (298.15-333.15 K) on the eradication of Cu2+ and Cd2+ metal cations. It was found that hydrophilic functional groups (-OH and -COOH) have performed an imperative role in the smooth loading of MOF-NPs into 3-D membrane capsules via intra/inter-molecular hydrogen bonding and van der waals potencies. The maximum monolayer uptake capacities (as calculated by the Langmuir isotherm model) of Cd2+ and Cu2+ by 3-D SGMMCs-OH were 940 and 1150 mg/g, respectively, and by 3-D SGMMCs-(OH)2 were 1375 and 1575 mg/g, respectively, under optimum conditions. The as-developed capsules have demonstrated superior selectivity against targeted metal cations under designated pH and maintained >80 % removal efficiency up to six consecutive treatment cycles. Removal mechanisms of metal cations by the 3-D SGMMCs-OH/(OH)2 was proposed, and electrostatic interaction, ion-exchange, inner-sphere coordination bonds/interactions, and aromatic ligands exchange were observed to be the key removal mechanisms. Notably, FTIR and XPS analysis indicated that hydroxyl groups of Zr-OH and BDC-OH/(OH)2 aromatic linkers played vital roles in Cu2+ and Cd2+ adsorption by participating in inner-sphere coordination interactions and aromatic ligands exchange mechanisms. The as-prepared capsules indicated >70 % removal efficiency of Cu2+ from real electroplating wastewater in the manifestation of other competitive metal ions and pollutants under selected experimental conditions. Thus, it was observed that newly configured 3-D SGMMCs-OH/(OH)2 have offered a valuable discernment into the development of MOFs-based water decontamination 3-D capsules for industrial applications.

A Bifunctional Three-Dimensional Zn(II) Metal-Organic Framework with Strong Luminescence and Adsorption Cr(VI) Properties

The mixed ligand 3-amino-1,2,4-triazole (Hatz) and terephthalic acid (H2pta) reacted with Zn(NO3)2·6H2O to synthesize a three-dimensional binuclear Zn(II) metal-organic framework: {[Zn2·(atz)2·(pta)]·3H2O}n (3D-Zn-MOF). This 3D-Zn-MOF has two different types of pores (4.5 × 4.5 Å2, 5.7 × 5.7 Å2). The crystalline 3D-Zn-MOF could be prepared into nanomaterials (3D-N-Zn-MOF) with particles of approximately 100 nm by a cell fragmentation apparatus. Compared with the solid-state luminescence of Hatz and H2pta, it was found that 3D-N-Zn-MOF exhibited strong luminescence performance and significant red-shift phenomenon. Due to the decrease in electronegativity and rigidity of ligands, as well as the effect of ligand metal charge transfer (LMCT), the fluorescence lifetime and quantum yield of 3D-ZN-N-MOF were 2.7241 ns and 3.02%, respectively. The maximum experimental adsorption capacity of 3D-N-Zn-MOF could reach 125.52 mg/g, which was superior to the majority of MOF adsorbents under the optimal adsorption conditions (25 °C, pH = 7, and the adsorbent concentration is 0.2000 g/L). The thermodynamic analysis of adsorption showed that the adsorption of Cr(VI) by 3D-N-Zn-MOF was a spontaneous (△G < 0) and exothermic (△H < 0) process. It could be found that 3D-N-Zn-MOF was a bifunctional material with potential applications by comprehensive analysis of the fluorescence and adsorption Cr(VI) performance.

Enhanced photoreduction efficiency of Cr(VI) driven by visible light in a new Zr-based metal-organic framework modified by hydroxyl groups

While metal-organic framework (MOF) photocatalysts have demonstrated a unique Cr(VI) photoreduction capability in recent decades, their performance is still insufficient for practical applications because of their low Cr(VI) uptake and poor visible light response. To cope with these drawbacks, a new OH-modified Zr-based MOF, termed HCMUE-1, was successfully prepared via a solvothermal method in this work. The complete characterization of HCMUE-1 was performed through various techniques, including powder X-ray diffraction (PXRD), Raman spectroscopy, Fourier transform infrared (FT-IR), thermogravimetric analysis and differential scanning calorimetry (TGA-DSC), scanning electron microscopy combined with energy-dispersive X-ray (SEM-EDX), and X-ray photoelectron spectroscopy (XPS). The obtained data exhibited the excellent Cr(VI) photoreduction efficiency of HCMUE-1, reaching up to 98% after 90 min and almost 100% after 120 min under visible light illumination in a low acidic medium. Noteworthily, HCMUE-1 retained the same Cr(VI) removal rate for at least seven cycles without considerable loss. Further experimental investigations demonstrated that the structural stability and surface morphology of HCMUE-1 were retained after photoreduction. Moreover, the photocatalytic reduction mechanism of Cr(VI) to Cr(III) was interpreted through a series of systematic experimental measurements. These results indicate that HCMUE-1 possesses potential as an efficient photocatalyst for reducing toxic Cr(VI) species from wastewater in real-life conditions.

Changes of MRGs and ARGs in Acinetobacter sp. SL-1 used for treatment of Cr(VI)-contaminated wastewater with waste molasses as carbon source

Antibiotic resistance genes (ARGs) may be synergistic selected during bio-treatment of chromium-containing wastewater and causing environmental risks through horizontal transfer. This research explored the impact of self-screening bacterium Acinetobacter sp. SL-1 on the treatment of chromium-containing wastewater under varying environmental conditions. The findings indicated that the optimal Cr(VI) removal conditions were an anaerobic environment, 30 °C temperature, 5 g/L waste molasses, 100 mg/L Cr(VI), pH = 7, and a reaction time of 168 h. Under these conditions, the removal of Cr(VI) reached 99.10 %, however, it also developed cross-resistance to tetracycline, gentamicin, clarithromycin, ofloxacin following exposure to Cr(VI). When decrease Cr(VI) concentration to 50 mg/L at pH of 9 with waste molasses as carbon source, the expression of ARGs was down regulated, which decreased the horizontal transfer possibility of ARGs and minimized the potential environmental pollution risk caused by ARGs. The study ultimately emphasized that the treatment of chromium-containing wastewater with waste molasses in conjunction with SL-1 not only effectively eliminates hexavalent chromium but also mitigates the risk of environmental pollution.

Design and application of metal organic frameworks for heavy metals adsorption in water: a review

The growing apprehension surrounding heavy metal pollution in both environmental and industrial contexts has spurred extensive research into adsorption materials aimed at efficient remediation. Among these materials, Metal-Organic Frameworks (MOFs) have risen as versatile and promising contenders due to their adjustable properties, expansive surface areas, and sustainable characteristics, compared to traditional options like activated carbon and zeolites. This exhaustive review delves into the synthesis techniques, structural diversity, and adsorption capabilities of MOFs for the effective removal of heavy metals. The article explores the evolution of MOF design and fabrication methods, highlighting pivotal parameters influencing their adsorption performance, such as pore size, surface area, and the presence of functional groups. In this perspective review, a thorough analysis of various MOFs is presented, emphasizing the crucial role of ligands and metal nodes in adapting MOF properties for heavy metal removal. Moreover, the review delves into recent advancements in MOF-based composites and hybrid materials, shedding light on their heightened adsorption capacities, recyclability, and potential for regeneration. Challenges for optimization, regeneration efficiency and minimizing costs for large-scale applications are discussed.

Nanoarchitectonics Design Strategy of Metal-Organic Framework and Bio-Metal-Organic Framework Composites for Advanced Wastewater Treatment through Adsorption

Freshwater depletion is an alarm for finding an eco-friendly solution to treat wastewater for drinking and domestic applications. Though several methods like chlorination, filtration, and coagulation-sedimentation are conventionally employed for water treatment, these methods need to be improved as they are not environmentally friendly, rely on chemicals, and are ineffective for all kinds of pollutants. These problems can be addressed by employing an alternative solution that is effective for efficient water treatment and favors commercial aspects. Metal organic frameworks (MOFs), an emerging porous material, possess high stability, pore size tunability, greater surface area, and active sites. These MOFs can be tailored; thus, they can be customized according to the target pollutant. Hence, MOFs can be employed as adsorbents that effectively target different pollutants. Bio-MOFs are a kind of MOFs that are incorporated with biomolecules, which also possess properties of MOFs and are used as a nontoxic adsorbent. In this review, we elaborate on the interaction between MOFs and target pollutants, the role of linkers in the adsorption of contaminants, tailoring strategy that can be employed on MOFs and Bio-MOFs to target specific pollutants, and we also highlight the effect of environmental matrices on adsorption of pollutants by MOFs.

Advances in metal-organic frameworks for water remediation applications

Rapid industrialization and agricultural development have resulted in the accumulation of a variety of harmful contaminants in water resources. Thus, various approaches such as adsorption, photocatalytic degradation and methods for sensing water contaminants have been developed to solve the problem of water pollution. Metal-organic frameworks (MOFs) are a class of coordination networks comprising organic-inorganic hybrid porous materials having organic ligands attached to inorganic metal ions/clusters via coordination bonds. MOFs represent an emerging class of materials for application in water remediation owing to their versatile structural and chemical characteristics, such as well-ordered porous structures, large specific surface area, structural diversity, and tunable sites. The present review is focused on recent advances in various MOFs for application in water remediation via the adsorption and photocatalytic degradation of water contaminants. The sensing of water pollutants using MOFs via different approaches, such as luminescence, electrochemical, colorimetric, and surface-enhanced Raman spectroscopic techniques, is also discussed. The high porosity and chemical tunability of MOFs are the main driving forces for their widespread applications, which have huge potential for their commercial use.

Facile construction of ZIF-94/PAN nanofiber by electrospinning for the removal of Co(II) from wastewater

This study aimed to synthesize a novel nanofiber adsorbent based on metal-organic frameworks (MOFs), ZIF-94-PAN, by incorporating ZIF-94 into polyacrylonitrile (PAN) through electrospinning. The investigation of the adsorption characteristics of ZIF-94-PAN for cobalt ions was undertaken, yielding findings that suggest an optimum ZIF-94 loading content within the ZIF-94-PAN composite of 8%. The adsorption experiments revealed that, under pH 8.3 and 298 K, ZIF-94-PAN-8% attained cobalt ion equilibrium adsorption (139.08 mg/g). Additionally, the adsorption kinetics of cobalt ions exhibited conformity with the pseudo-second-order model, whereas adherence to the Freundlich isotherm model indicated a non-homogeneous, endothermic process. XPS analysis unveiled that the adsorption mechanism was characterized by the coordination of nitrogen and oxygen atoms within ZIF-94-PAN with cobalt ions. This study effectively addressed the challenges of separating and recovering MOFs adsorbents by fabricating them as nanofibers. The remarkable adsorption performance and stability of the ZIF-94-PAN nanofibers highlight their potential for removing cobalt-contaminated wastewater.

Electrospun microcrystalline cellulose/chitosan porous composite nanofibrous membranes modified by non-thermal plasma for gaseous formaldehyde adsorption

To develop a green and facile adsorbent for removing indoor polluted formaldehyde (HCHO) gas, the biomass porous nanofibrous membranes (BPNMs) derived from microcrystalline cellulose/chitosan were fabricated by electrospinning. The enhanced chemical adsorption sites with diverse oxygen (O) and nitrogen (N)-containing functional groups were introduced on the surface of BPNMs by non-thermal plasma modification under carbon dioxide (CO2) and nitrogen (N2) atmospheres. The average nanofiber diameters of nanofibrous membranes and their nanomechanical elastic modulus and hardness values decreased from 341 nm to 175-317 nm and from 2.00 GPa and 0.25 GPa to 1.70 GPa and 0.21 GPa, respectively, after plasma activation. The plasma-activated nanofibers showed superior hydrophilicity (WCA = 0°) and higher crystallinity than that of the control. The optimal HCHO adsorption capacity (134.16 mg g-1) of BPNMs was achieved under a N2 atmosphere at a plasma power of 30 W and for 3 min, which was 62.42 % higher compared with the control. Pyrrolic N, pyridinic N, CO and O-C=O were the most significant O and N-containing functional groups for the improved chemical adsorption of the BPNMs. The adsorption mechanism involved a synergistic combination of physical and chemical adsorption. This study provides a novel strategy that combines clean plasma activation with electrospinning to efficiently remove gaseous HCHO.

Enrichment and immobilization of heavy metal ions from wastewater by nanocellulose/carbon dots-derived composite

Heavy metal ions (HMIs) have been widely applied in various industries because of their excellent physicochemical properties. However, their discharging without appropriate treatment brought about serious pollution problems. So it is desirable but challenging to rapidly and completely clean up these toxic pollutants from water, especially utilizing environmentally friendly and naturally rich biomass materials. In this work, we prepared nanocellulose/carbon dots/magnesium hydroxide (CCMg) ternary composite using cotton via a simple hydrothermal method. The removal mechanism towards Cd2+ and Cu2+ was investigated using a combination of experimental techniques and density functional theory calculations. CCMg shows a good ability to remove HMIs. It is realized that the interaction between each component of CCMg and cadmium nitrate is mainly of hydrogen/dative bonds. Cadmium nitrate is preferentially enriched by the Mg(OH)2 moiety, proved by calculated thermodynamics, interfacial interactions and charges. After transformation, the cadmium carbonate precipitate is fixed on the surface by nanocellulose (NC) via chemical coupling; and of interest is that copper ion precipitates in the form of basic sulfate. Due to its high adsorption effect and simple recovery operation, CCMg is having a wide range of application prospects as a water treatment agent.

Structure and properties of metal-organic frameworks modulated by sulfate ions

Anions play a significant role in the construction of metal-organic frameworks (MOFs). Anions can affect coordination between metal ions and organic ligands, and the formation of crystal structures, thereby affecting the structure and properties of MOFs. Two novel 3D porous MOFs ({[Cd3(TIPE)2(SO4)1.6(H2O)2.4]·2.8OH·6.2H2O}n (MOF-1) and {[Cd3(TIPE)2(SO4)3(H2O)2]·10H2O}n (MOF-2)) were successfully synthesized, by introducing SO42- to design and adjust their structure and properties, in which the sulfate ions not only participated in coordination but also played a bridging role. Both MOF-1 and MOF-2 exhibited high stability and strong fluorescence properties, and their fluorescence properties also changed compared to those of previously reported 2D nonporous MOF-3 ({[Cd2(TIPE)2Cl3(ACN)]·CdCl3·3H2O}n) with an identical ligand. They could also be used in combination with MOF-3 to distinguish between Fe3+ and Cr2O72- ions, due to a change in their fluorescence properties. In this work, the structure was reshaped by introducing sulfate ions, and the role and function of the sulfate ions in the structure were studied, providing a feasible idea for the design and precise regulation of MOFs.

Ionic liquid-modified UiO-66-NH2 as sorbent of dispersive solid-phase extraction for rapid adsorption and enrichment of benzoylurea insecticides

Ionic liquid (IL)-modified UiO-66-NH2 composite was prepared and used as sorbent of dispersed solid-phase extraction (dSPE) for extracting trace benzoylurea insecticides (BUs) from complex environmental matrices. The IL in framework endowed the prepared material had electropositive characteristics, which can produce interaction with electron rich guest molecules, such as BUs. The high thermal and chemical stability of UiO-66-NH2/IL enabled it to be reused for 16 times without significant reduction in adsorption performance. Due to the multiple forces including π-π, hydrogen bonding, and fluorine-fluorine interaction, UiO-66-NH2/IL showed good adsorption performance, short adsorption time (20 s) and rapid desorption ability (60 s) for BUs. Under the optimal conditions, the method exhibited wide linear range (0.02-500 ng mL-1) with correlation coefficient (R2) not worse than 0.9928, high enrichment factor (252-300), and low detection limit (0.005-0.4 ng mL-1). The dispersed solid phase extraction coupling with high-performance liquid chromatography-diode array detector (dSPE-HPLC-DAD) was successfully used to detection of BUs in real environmental samples and satisfactory recoveries were obtained (80.5%±2.4-118%±3.2). The results indicated that UiO-66-NH2/IL composite can be a potential sorbent for the preconcentration of trace insecticides in environmental samples.

One-Step Fabrication of Recyclable Konjac Glucomannan-Based Magnetic Nanoparticles for Highly Efficient Cr(VI) Adsorption

Recently, the natural polymer polysaccharide konjac glucomannan (KGM) has received attention as a promising adsorbent in water treatment due to its low toxicity, cost-effectiveness and biocompatibility. However, the high-level water absorbency of KGM makes it difficult to recover in water treatment. In this study, by combining KGM with magnetic nanoparticles, KGM-based magnetic nanoparticles (KGM-Fe3O4 NPs) with excellent adsorption properties and recyclability for heavy metals were prepared using an one-step precipitation method. The as-prepared KGM-Fe3O4 NPs have a spherical morphology of superparamagnetism with a small particle size (ca. 7.0 nm) and a large specific surface area (160.1 m2·g-1). Taking Cr(VI) as the target heavy metal ion, the above nanoparticles have a high adsorption capacity and fast adsorption rate for Cr(VI). The pseudo-second order kinetic model is more suitable to describe the adsorption process of Cr(VI) by KGM-Fe3O4 NPs, and the maximum adsorption capacity of Cr(VI) onto KGM-Fe3O4 NPs was calculated to be 41.67 mg·g-1 using the Langmuir isotherm model. In addition, KGM-Fe3O4 NPs with adsorbed heavy metal ions can be quickly recovered from a solution, regenerated, and reused in the next cycle. KGM-based Fe3O4 nanoparticles are promising adsorbents that show significant reusability for the removal of metal ions in water and wastewater treatment.

High-Efficiency Adsorption of Cr(VI) and Mn(VII) from Wastewater by a Two-Dimensional Copper-Based Metal-Organic Framework

Cr(VI) and Mn(VII) in industrial wastewater have certain toxicity, and they pose a threat to the environment and human health and safety. Metal-organic frameworks (MOFs) usually have rich adsorption sites and a large specific surface area. They can effectively adsorb Cr(VI) and Mn(VII) from wastewater. In this paper, a two-dimensional copper-based metal-organic framework, {[Cu·(4,4'-bpy)2·(H2O)]·2(NO3)·6(H2O)·(CH3OH)}n (1), is synthesized by hydrothermal synthesis. The structure of 1 is characterized by Fourier transform infrared (IR) spectroscopy, single-crystal X-ray diffraction, element analysis, and X-ray photoelectron spectroscopy (XPS). The results showed that 1 had a two-dimensional network structure, and the specific surface area of the nanostructure was 67.63 m2/g. The nanostructure of 1 could efficiently adsorb Cr(VI) and Mn(VII) from wastewater. The adsorption properties of Cr(VI) and Mn (VII) of 1 showed that the optimal concentration of both adsorbents was 0.2 g/L. It has good adsorption performance in the pH range 4-8. The adsorption performance is the best when pH is 7, which can reach 145 and 83 mg/g, respectively.

A review on chromium health hazards and molecular mechanism of chromium bioremediation

Living beings have been devastated by environmental pollution, which has reached its peak. The disastrous pollution of the environment is in large part due to industrial wastes containing toxic pollutants. The widespread use of chromium (Cr (III)/Cr (VI)) in industries, especially tanneries, makes it one of the most dangerous environmental pollutants. Chromium pollution is widespread due to ineffective treatment methods. Bioremediation of chromium (Cr) using bacteria is very thoughtful due to its eco-friendly and cost-effective outcome. In order to counter chromium toxicity, bacteria have numerous mechanisms, such as the ability to absorb, reduce, efflux, or accumulate the metal. In this review article, we focused on chromium toxicity on human and environmental health as well as its bioremediation mechanism.

Efficient removal of metal ions from aqueous solutions using MoS2 functionalized chitosan Schiff base incorporated with Fe3O4 nanoparticle

In the present work a novel pyrazole based chitosan Schiff base material was prepared using 5-azido-3-methyl-1-phenyl-1H-pyrazole-4-carbaldehyde and functionalized using Fe3O4-MoS2, where the nanoparticles get embedded within the gel matrix. The composite material was characterized using various techniques such as XRD, SEM, FTIR, EDS and TGA. The adsorbent material was analysed for the adsorptive take up process from the aqueous solutions of metal ion concentration ranging 20-100 mgL-1. The maximum adsorption capacity obtained for the material was 200.00 and 125.00 mg/g for Cr(VI) and Cu(II) respectively. Adsorptive mechanism was found to have pseudo second order kinetics and the adsorption isotherm followed Langmuir adsorption model following the monolayer adsorptive process. Further the evaluated thermodynamic parameter showed the adsorption process to be spontaneous and endothermic in nature. Reusability of the composite material was achieved using suitable stripping solutions.

Chitosan Hydrogels for Water Purification Applications

Chitosan-based hydrogels have gained significant attention for their potential applications in water treatment and purification due to their remarkable properties such as bioavailability, biocompatibility, biodegradability, environmental friendliness, high pollutants adsorption capacity, and water adsorption capacity. This article comprehensively reviews recent advances in chitosan-based hydrogel materials for water purification applications. The synthesis methods, structural properties, and water purification performance of chitosan-based hydrogels are critically analyzed. The incorporation of various nanomaterials into chitosan-based hydrogels, such as nanoparticles, graphene, and metal-organic frameworks, has been explored to enhance their performance. The mechanisms of water purification, including adsorption, filtration, and antimicrobial activity, are also discussed in detail. The potential of chitosan-based hydrogels for the removal of pollutants, such as heavy metals, organic contaminants, and microorganisms, from water sources is highlighted. Moreover, the challenges and future perspectives of chitosan-based hydrogels in water treatment and water purification applications are also illustrated. Overall, this article provides valuable insights into the current state of the art regarding chitosan-based hydrogels for water purification applications and highlights their potential for addressing global water pollution challenges.

Cadmium and lead removal by Mg/Fe bimetallic oxide-loaded sludge-derived biochar: batch adsorption, kinetics, and mechanism

Biochar is a valuable adsorbent for the removal of heavy metals from water, and it is important to explore ways to increase its heavy metal adsorption capacity. In this study, Mg/Fe bimetallic oxide was loaded onto sewage sludge-derived biochar to enhance its heavy metal adsorption capacity. Batch adsorption experiments for the removal of Pb(II) and Cd(II) were performed to evaluate the removal efficiency of Mg/Fe layer bimetallic oxide-loaded sludge-derived biochar ((Mg/Fe)LDO-ASB). The physicochemical properties of (Mg/Fe)LDO-ASB and corresponding adsorption mechanisms were studied. The maximum adsorption capacities of (Mg/Fe)LDO-ASB for Pb(II) and Cd(II), which were calculated by isotherm model, were 408.31 and 270.41 mg/g, respectively. Adsorption kinetics and isotherms analysis showed that the dominant adsorption process of Pb(II) and Cd(II) uptake by (Mg/Fe)LDO-ASB was spontaneous chemisorption and heterogeneous multilayer adsorption, and film diffusion was the rate-limiting step. SEM-EDS, FTIR, XRD, and XPS analyses revealed that the Pb and Cd adsorption processes of (Mg/Fe)LDO-ASB involved oxygen-containing functional group complexation, mineral precipitation, electron-π-metal interactions, and ion exchange. The order of their contribution was as follows: mineral precipitation (Pb: 87.92% and Cd: 79.91%) > ion exchange (Pb: 9.84% and Cd: 16.45%) > metal-π interaction (Pb: 0.85% and Cd: 0.73%) > oxygen-containing functional group complexation (Pb: 1.39% and Cd: 2.91%). Mineral precipitation was the main adsorption mechanism, and ion exchange played a crucial role in Pb and Cd adsorption.

Advances in the adsorption of heavy metal ions in water by UiO-66 composites

The innovative adsorbents known as the Metal-organic Framework (MOFs) had a high specific surface area, various structural types, and good chemical stability. MOFs have been produced through hydrothermal, mechanochemical, microwave-assisted, gelation, and other synthesis methods, and the solvothermal process is one of them that researchers frequently utilize. The UiO materials have a more comprehensive application potential than different subtypes of MOFs among the numerous MOFs that have been synthesized. The synthesis of MOFs and their composites, as well as the adsorption characteristics of UiO materials in the adsorption of various heavy metal ions, have all been examined and summarized in this study.

A review on hybrid membrane-adsorption systems for intensified water and wastewater treatment: Process configurations, separation targets, and materials applied

In the era of rapid and conspicuous progress of water treatment technologies, combined adsorption and membrane filtration systems have gained great attention as a novel and efficient method for contaminant removal from aqueous phase. Further development of these techniques for water/wastewater treatment applications will be promising for the recovery of water resources as well as reducing the water tension throughout the world. This review introduces the state-of-the-art on the capabilities of the combined adsorption-membrane filtration systems for water and wastewater treatment applications. Technical information including employed materials, superiorities, operational limitations, process sustainability and upgradeing strategies for two general configurations i.e. hybrid (pre-adsorption and post-adsorption) and integrated (film adsorbents, low pressure membrane-adsorption coupling and membrane-adsorption bioreactors) systems has been surveyed and presented. Having a systematic look at the fundamentals of hybridization/integration of the two well-established and efficient separation methods as well as spotlighting the current status and prospectives of the combination strategies, this work will be valuable to all the interested researchers working on design and development of cutting-edge wastewater/water treatment techniques. This review also draws a clear roadmap for either decision making and choosing the best alternative for a specific target in water treatment or making a plan for further enhancement and scale-up of an available strategy.

Responses of Bacillus sp. under Cu(II) stress in relation to extracellular polymeric substances and functional gene expression level

The production and composition of extracellular polymeric substances (EPS), as well as the EPS-related functional resistance genes and metabolic levels of Bacillus sp. under Cu(II) stress, were investigated. EPS production increased by 2.73 ± 0.29 times compared to the control when the strain was treated with 30 mg L^-1 Cu(II). Specifically, the polysaccharide (PS) content in EPS increased by 2.26 ± 0.28 g CDW^-1 and the PN/PS (protein/polysaccharide) ratio value increased by 3.18 ± 0.33 times under 30 mg L^-1 Cu(II) compared to the control. The increased EPS secretion and higher PN/PS ratio in EPS strengthened the cells' ability to resist the toxic effect of Cu(II). Differential expression of functional genes under Cu(II) stress was revealed by Gene Ontology pathway enrichment analysis and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analysis. The enriched genes were most obviously upregulated in the UMP biosynthesis pathway, the pyrimidine metabolism pathway, and the TCS metabolism pathway. This indicates an enhancement of EPS regulation-related metabolic levels and their role as a defense mechanism for cells to adapt to Cu(II) stress. Additionally, seven copper resistance genes were upregulated while three were downregulated. The upregulated genes were related to the heavy metal resistance, while downregulated genes were related to cell differentiation, indicating that the strain had initiated an obvious resistance to Cu(II) despite its severe cell toxicity. These results provided a basis for promoting EPS-regulated associated functional genes and the application of gene-regulated bacteria in heavy metal-containing wastewater treatment.

Ratiometric fluorescent detection of exosomal piRNA-823 based on Au NCs/UiO-66-NH2 and target-triggered rolling circle amplification

piR-823 is a newly discovered colorectal cancer marker with high diagnostic efficacy. However, the current quantification methods have complicated operations and high cost, which restrict its clinical application. Herein, a metal-organic framework (MOF) with a UiO-66 prototype structure which supports gold nanoclusters (Au NCs), Au NCs/UiO-66-NH₂, were prepared as a model nanobiosensing platform for ratiometric detection of exosomal piR-823. The rolling circle amplification process provides high sensitivity and the ratiometric detection process ensures good accuracy of the sensor. Such biosensor showed a wide linear range of 0.04-4 pM, and a low detection limit of 10.2 fM towards piR-823. In addition, piR-823 can be used as an effective supplement to carcinoembryonic antigen (CEA) in clinical diagnosis of colorectal cancer. This study not only provides a potentially valuable ratio fluorescence platform involving enzyme catalytic reaction, but also offers a design blueprint for further expansion of nanotechnology in the diverse biological analysis.

Metal organic framework-loaded polyethersulfone/polyacrylonitrile photocatalytic nanofibrous membranes under visible light irradiation for the removal of Cr(vi) and phenol from water

In this work, various amounts of the UiO-66-NH₂ and UiO-66-NH₂/TiO₂ MOFs have been loaded into polyacrylonitrile (PAN) nanofibers supported on polyethersulfone (PES). The visible light irradiation was used to investigate the influence of pH (2-10), initial concentration (10-500 mg L^-1), and time (5-240 min) on the removal efficiency of phenol and Cr(vi) in the presence of MOFs. The reaction time: 120 min, catalyst dosage: 0.5 g L^-1, pH: 2 for Cr(vi) ions and pH: 3 for phenol molecules were optimum to degrade phenol and to reduce Cr(vi) ions. The characterization of the produced samples was performed using X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, scanning electron microscopy, and Brunauer-Emmett-Teller analysis. The capability of synthesized photocatalytic membranes was investigated for the removal of phenol and Cr(vi) ions from water. The water flux, Cr(vi) and phenol solutions fluxes and their rejection percentages were evaluated under pressure of 2 bar in the presence of visible light irradiation and in the dark. The best performance of the synthesized nanofibers was obtained for UiO-66-NH₂/TiO₂ MOF 5 wt% loaded-PES/PAN nanofibrous membranes at temperature of 25 °C and pH of 3. Results demonstrated the high capability of MOFs-loaded nanofibrous membranes for the removal of various contaminants such as Cr(vi) ions and phenol molecules from water.

Aqueous Pb(II) Removal Using ZIF-60: Adsorption Studies, Response Surface Methodology and Machine Learning Predictions

Zeolitic imidazolate frameworks (ZIFs) are increasingly gaining attention in many application fields due to their outstanding porosity and thermal stability, among other exceptional characteristics. However, in the domain of water purification via adsorption, scientists have mainly focused on ZIF-8 and, to a lesser extent, ZIF-67. The performance of other ZIFs as water decontaminants is yet to be explored. Hence, this study applied ZIF-60 for the removal of lead from aqueous solutions; this is the first time ZIF-60 has been used in any water treatment adsorption study. The synthesized ZIF-60 was subjected to characterization using FTIR, XRD and TGA. A multivariate approach was used to investigate the effect of adsorption parameters on lead removal and the findings revealed that ZIF-60 dose and lead concentration are the most significant factors affecting the response (i.e., lead removal efficiency). Further, response surface methodology-based regression models were generated. To further explore the adsorption performance of ZIF-60 in removing lead from contaminated water samples, adsorption kinetics, isotherm and thermodynamic investigations were conducted. The findings revealed that the obtained data were well-fitted by the Avrami and pseudo-first-order kinetic models, suggesting that the process is complex. The maximum adsorption capacity (q_max) was predicted to be 1905 mg/g. Thermodynamic studies revealed an endothermic and spontaneous adsorption process. Finally, the experimental data were aggregated and used for machine learning predictions using several algorithms. The model generated by the random forest algorithm proved to be the most effective on the basis of its significant correlation coefficient and minimal root mean square error (RMSE).

Stabilization and strengthening of chromium(VI)-contaminated soil via magnesium ascorbyl phosphate (MAP) and phytase addition

Cr(VI) contamination of soil threatens the environment and reduces soil strength. Therefore, both Cr(VI) stabilization and soil reinforcement should be considered in site remediation for future construction. This study investigated a biochemical treatment process using magnesium ascorbyl phosphate (MAP) and phytase. MAP was hydrolyzed via phytase catalysis to produce ascorbic acid (AA) and MgHPO₄·3H₂O precipitation. The AA reduced Cr(VI) into low-toxic Cr(III), which precipitated as Cr(OH)₃ and CrPO₄. More than 90% of the 500 mg/kg Cr(VI) in soil was reduced by 5% MAP (wt% of soil) and 1% phytase (vol/vol of soil water) doses at the geotechnically optimal soil moisture content of 16.8%. The MgHPO₄·3H₂O precipitates filled soil pores and enhanced the unconfined compression strength of treated soil by more than two times. This research reports a novel and practical enzymatically induced phosphate precipitation process for the remediation of Cr(VI)-contaminated soil.

Electrospun Nanofiber Membrane: An Efficient and Environmentally Friendly Material for the Removal of Metals and Dyes

With the rapid development of nanotechnology, electrospun nanofiber membranes (ENM) application and preparation methods have attracted attention. With many advantages such as high specific surface area, obvious interconnected structure, and high porosity, ENM has been widely used in many fields, especially in water treatment, with more advantages. ENM solves the shortcomings of traditional means, such as low efficiency, high energy consumption, and difficulty in recycling, and it is suitable for recycling and treatment of industrial wastewater. This review begins with a description of electrospinning technology, describing the structure, preparation methods, and factors of common ENMs. At the same time, the removal of heavy metal ions and dyes by ENMs is introduced. The mechanism of ENM adsorption on heavy metal ions and dyes is chelation or electrostatic attraction, which has excellent adsorption and filtration ability for heavy metal ions and dyes, and the adsorption capacity of ENMs for heavy metal ions and dyes can be improved by increasing the metal chelation sites. Therefore, this technology and mechanism can be exploited to develop new, better, and more effective separation methods for the removal of harmful pollutants to cope with the gradually increasing water scarcity and pollution. Finally, it is hoped that this review will provide some guidance and direction for research on wastewater treatment and industrial production.

Enhanced gaseous acetone adsorption on montmorillonite by ball milling generated Si-OH and interlayer under synergistic modification with H2O2 and tetramethylammonium bromide

Montmorillonite (Mt) is a potential adsorbent for volatile organic vapor removal from contaminated soils because of its rich reserves and porous nature, but its inertia surface property has limited its application for polar compounds. In this study, modifications of Mt were carried out by high energy ball milling with H₂O₂ and tetramethylammonium bromide (TMAB) to obtain adsorbents with both high porosity and abundant Si-OH groups (BHTMt). The microporous structure produced by TMAB insertion as well as the silanol (Si-OH) groups formed by H₂O₂ oxidation improved the adsorption of acetone by the modified material. The adsorption capacity of BHTMt for acetone was increased by 80% compared to the original Mt. The effect of H₂O₂ dosage on the adsorption performance for gaseous acetone was investigated by dynamic adsorption experiments. The adsorption kinetic results demonstrated that the adsorption of acetone by the modified material was subject to both physical and chemical adsorption. Density functional theory calculations indicated that there was no obvious interaction between TMAB and acetone, and the materials adsorbed acetone mainly through hydrogen bonding interaction of Si-OH as well as pore filling effects.

Preparation of metal organic frameworks modified chitosan composite with high capacity for Hg(II) adsorption

In this study, a novel modified chitosan composite adsorbent (UNCS) was prepared by crosslinking between chitosan and metal organic frameworks (MOFs) material UiO-66-NH₂ using epichlorohydrin as crosslinker. The influence of the prepared conditions was investigated. The structure and morphology of the composite were characterized by FT-IR, XRD, SEM, TGA, BET and zeta potential analysis. Effects of different variables for adsorption of Hg(II) on this adsorbent were explored. The kinetic studies indicated that the adsorption process followed the pseudo-second-order kinetic model and the adsorption equilibrium could be reached within 2 h. The adsorption was mainly controlled by chemical process. Adsorption isothermal studies illustrated that the adsorption fitted Langmuir isotherm model, implying the homogeneous adsorption on the surface of the adsorbent. The adsorbent exhibited high uptake and the maximum capacity from Langmuir model could reach 896.8 mg g^-1 at pH 6. Thermodynamic studies showed the spontaneous nature and exothermic nature of the adsorption process. Additionally, the removal of Hg(II) on UNCS could achieve over 90 %. The adsorption-desorption cycled experiments indicated the appropriate reusability of the adsorbent. Hence, this adsorbent would be promising for the removal of Hg(II) from wastewater.

Confinement effect of network-structured carbon dots/cellulose nanocellulose/magnesium hydroxide for enhanced heavy metal ions capture and immobilization

To solve pollution problem of heavy metal ions (HMIs) and recover them for sustainable development, a high-efficient-sewage treatment agent, carbon dots/cellulose nanofiber/Mg(OH)₂ (CCMg), has been fabricated via a simple hydrothermal method. A variety of characterizations show that cellulose nanofiber (CNF) formed a layered-net structure. Hexagonal Mg(OH)₂ flakes of about 100 nm has been attached on CNF. Carbon dots (CDs) around 10-20 nm in size were produced from CNF and distributed along CNF. The extraordinary structural feature endows CCMg with high removal performance towards HMIs. The up-taken capacities reach 992.8 and 667.3 mg g^-1 for Cd²⁺ and Cu²⁺, respectively. The composite bears excellent durability in treating wastewater. Notably, the qualification of the drinking water can be satisfied while applying CCMg to handle Cu²⁺ wastewater. The mechanism of removal process has been proposed. Practically, Cd²⁺/Cu²⁺ ions were immobilized by CNF due to the space confinement effect. It achieves the facile separation and recovery of HMIs from the sewage, and more importantly, eliminates the risk of secondary contamination.

In Situ Reconstruction of Active Catalysis Sites Triggered by Chromium Immobilization for Sulfite Oxidation

Hexavalent chromium (Cr(VI)) is a highly toxic substance in wastewater, triggering grievous detriment to aquatic life and human health. Magnesium sulfite is spawned along with the desulfurization process in coal-fired power plants, which is usually disposed of as solid waste. Here, a "waste control by waste" method was proposed upon the redox of Cr(VI)-sulfite, in which highly toxic Cr(VI) is detoxicated and sequent enriched on a novel biochar-induced cobalt-based silica composite (BISC) due to the forced electron transfer from chromium to surface hydroxyl. The immobilized Cr on BISC gave rise to the reconstruction of catalytic active sites "Cr-O-Co", which further enhance its performance in sulfite oxidation by elevating O₂ adsorption. As a result, the sulfite oxidation rate increased by 10 times compared with the non-catalysis benchmark together with the maximum chromium adsorption capacity being 120.3 mg/g. Therefore, this study provides a promising strategy to simultaneously control highly toxic Cr(VI) and sulfite, achieving high-grade sulfur resource recovery for wet magnesia desulfurization.

Synthesis of triethylenetetramine modified sodium alginate/CuS nanocrystal composite for enhanced Cr(VI) removal: Performance and mechanism

Photocatalysis has been widely used for the removal of hexavalent chromium from wastewater as an efficient and environmental friendly method. However, conventional photocatalysts generally exhibit poor adsorption properties toward Cr(VI), resulting in unsatisfactory performance in high concentrated wastewaters. In this study, we synthesized a novel composite material with high Cr(VI) adsorption ability by blending prepared CuS nanocrystals into triethylenetetramine modified sodium alginate for the enhanced photocatalytic removal of Cr(VI). Effect of CuS dosage, pH value, light source and intensity were discussed for the optimum Cr(VI) removal conditions. The synthesized composite has shown good adsorption performance toward Cr(VI) and the overall removal rate reached 98.99 % within 50 min under UV light irradiation with citric acid as hole scavenger. Adsorption isotherm, thermodynamics, and kinetics with corresponding model fitting were discussed, which suggested that the monolayer and chemical adsorption dominated the adsorption process. Characterization results indicated that amino and hydroxyl groups contributed electrons in the photocatalysis reaction for the reduction of Cr(VI) to Cr(III). CuS nanocrystals can enhance the surface charge and light absorbance ability of the composite, and the Cr(VI) removal was governed by electrostatic interaction and photo-induced redox reaction.

Design of Zr-MOFs by Introducing Multiple Ligands for Efficient and Selective Capturing of Pb(II) from Aqueous Solutions

The existence of lead ions seriously affects the quality of many metal products in metallurgical enterprises. Currently, the various methods of lead-ion removal tried by researchers will affect valuable metals in the removal process, thus resulting in low economic efficiency. In this study, a novel metal-organic framework adsorbent (UiO-FHD) which efficiently and selectively captures lead ions is developed by introducing multiple ligands. The maximum adsorption capacity of lead ions is 433.15 mg/g at pH 5. The adsorption process accords with the pseudo-second-order kinetic and the Langmuir isotherm models at room temperature. Thermodynamic experiments indicate that the removal of Pb(II) is facilitated by appropriate temperature reduction. The performance tests indicate that UiO-FHD maintains a high removal rate of 90.35% for Pb(II) after four consecutive adsorption-desorption cycles. The distribution coefficient of lead ions (26.7 L/g) shows that UiO-FHD has excellent selective adsorption for lead ions. It is revealed that the chelation of the sulfhydryl groups and the electrostatic interaction of the hydroxyl groups are the dominant factors to improve the removal rate of Pb(II) by density functional theory calculations. This study clarifies the value of self-designed novel organic ligands in metal-organic framework materials that selectively capture heavy-metal ions.

Accurate Determination of Trace Cadmium in Soil Samples with Graphite Furnace Atomic Absorption Spectrometry Using Metal-Organic Frameworks as Matrix Modifiers

Cadmium (Cd) is a highly toxic heavy metal that is widely distributed in soils at low concentrations. Its volatilization loss occurs at an ashing temperature higher than 350 °C. Accordingly, the accurate determination of its concentration in soils often requires the addition of chemical modifiers by graphite furnace atomic absorption spectrometry (GFAAS) to improve the thermal stability of Cd. In this work, a metal-organic framework (MOF, UIO-66-NH₂) was utilized as a matrix modifier to improve accuracy in determining Cd in soils using GFAAS. The Cd signal, as influenced by drying and pyrolysis temperature and special gas, was also investigated, and the measuring conditions were optimized (2 μg L^-1 Cd concentrations, matrix modifier: UIO-66-NH₂, pyrolysis temperature: 550 °C, atomization temperature: 1650 °C, and special gas: air). The limit of detection (LOD) and the characteristic mass for Cd in soil were 3.84 ng g^-1 and 0.80 pg, respectively. Five soil standard reference materials (SRMs) were analyzed for Cd to verify the effectiveness of the optimized measuring conditions. The soil Cd concentrations obtained were in remarkable agreement with the reference values. Moreover, the mechanism of UIO-66-NH₂ on the graphite platform was investigated in the drying and pyrolysis steps by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). During the drying steps, many functional groups of the matrix were activated, and Cd²⁺ could be captured on its surface. After the pyrolysis step, the structure matrix collapsed and was partially decomposed into ZrO₂, and subsequently, an intermediate state of ZrO₂-(CdO) appeared at high temperatures, which came from the active binding sites on the zirconium oxide octahedron nodes.

Facile one-pot synthesis of polyethyleneimine functionalized α-FeOOH nanoraft consisted of single-layer parallel-aligned ultrathin nanowires for efficient removal of Cr (VI): Synergy of reduction and adsorption

Two-dimensional (2D) iron oxide-hydroxide (FeOOH) nanomaterials as low-cost and environmental-friendly composites are promising materials for application in heavy metal elimination. However, developing 2D FeOOH adsorbents with high adsorption capacity and excellent durability toward Cr (VI) removal is still a challenge due to the intrinsically non-layered structure. Here, a novel polyethyleneimine (PEI) functionalized 2D single-layer nano-raft-like α-FeOOH (α-FeOOH NF) consisted of parallel-aligned ultrathin nanowires was obtained via a facile one-pot hydrothermal approach. It was found that the 2D α-FeOOH NF nanostructure was formed by an in-plane iterative self-assembly mechanism, where α-FeOOH nanoparticles acted as intermediates and iterative seeds with anisotropic growth. The as-prepared 2D α-FeOOH NF possessed porous structure and high surface area, which provided a strong ability to capture the Cr (VI) ions in water. Benefiting from the unique structure and PEI modification, it exhibited fast adsorption kinetic rate, high reusability, and high adsorption capacity toward Cr(VI) removal. The removal mechanism involved adsorption and reduction process. Besides, the molecular dynamic simulations disclosed a facet-dependent Cr(VI) adsorption behavior of α-FeOOH. The maximum adsorption capacity was 67.1 mg/g and the removal efficiency still maintained 83.9 % in the fifth cycle. This work demonstrated that 2D α-FeOOH NF could be a promising adsorbent for Cr(VI) removal.

High capacity and fast removal of Cr(vi) by alkali lignin-based poly(tetraethylene pentamine-pyrogallol) sorbent

In this work, a novel alkali lignin-based adsorption material, alkali lignin-based poly(tetraethylene pentamine-pyrogallol) (AL-PTAP), was prepared using a Mannich reaction and catechol-amine reaction for removal of Cr(vi). It was characterized by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The effects of tetraethylene pentamine (TEPA) dosage, pyrogallol (PL) dosage, contact time, pH, temperature and other factors on the adsorption behavior of the adsorbent were systematically investigated. These experimental data show that the adsorption behavior conforms to the pseudo-second-order kinetic model and the Langmuir isotherm model. The maximum adsorption capacity is 769.2 mg g^-1 at 303 K, which is much higher than that of alkali lignin (AL). AL-PTAP can achieve a removal rate of almost 100% for Cr(vi) solutions with a concentration of less than 90 mg L^-1 at 1 min. Furthermore, the toxic Cr(vi) is partly reduced to nontoxic Cr(iii) during the adsorption process. Therefore, AL-PTAP is a fast and efficient alkali lignin-based adsorbent, which is expected to improve the utilization value of alkali lignin in Cr(vi) wastewater treatment.

Insight into microwave-assisted synthesis of the chitosan-MOF composite: Pb(II) adsorption

Heavy metal contamination has increased over the globe, causing significant environmental issues owing to direct and indirect releases into water bodies. As a result, metal removal from water entities must be addressed soon. Various adsorbents such as MOFs and chitosan have demonstrated promising results in water treatment. The present study prepared a composite material (chitosan-UiO-66-glycidyl methacrylate MOF) by a microwave-assisted method. The structure and morphology of the chitosan-MOF composite were studied using FE-SEM, EDX, XRD, BET, FT-IR, and TGA techniques. In addition, the adsorption of Pb(II) from aqueous solution onto the chitosan-MOF composite was analyzed in a batch study concerning pH, contact time, initial metal ion concentration, and adsorbent dosage. The composite has a large surface area of 867 m²/g with a total pore volume of 0.51 cm³/g and thermal stability of up to 400 [Formula: see text]. Following an analysis of the adsorption isotherms, kinetics, and thermodynamics, the Langmuir model showed an excellent fit with the adsorption data (R² = 0.99) and chi-squared (X² = 3.609). The adsorption process was a spontaneous exothermic reaction and the pseudo-second-order rate equation fitted the kinetic profile well. Moreover, the composite is recyclable, retaining 83.45% of its removal effectiveness after 5 consecutive cycles, demonstrating it as a sustainable adsorbent for metal recovery. This study introduces a novel synthesized composite with enhanced recyclability and a higher potential for eliminating pollutants from industrial wastewater.

Synthesis of Chitosan-TiO2 Nanocomposite for Efficient Cr(VI) Removal from Contaminated Wastewater Sorption Kinetics, Thermodynamics and Mechanism

A photolysis method was used to prepare a nanocomposite adsorbent (Chitosan-TiO₂) and was tested for Cr(VI) removal from aqueous solution. The produce nanocomposite was investigated using, XRD, BET, FTIR, FESEM-EDX and TEM before and after Cr(VI) adsorption. The XRD results shows prepared anatase phase of TiO₂ with 12 nm. According to BET measurements, the surface area of the TiO₂/chitosan nanocomposite was lower and archived to 26 m²/g, while the TEM and FESEM images show a uniform distribution of TiO₂ throughout the chitosan matrix. Adsorption and kinetic experiments were run in batch system under different conditions of pH, contact time, adsorbent dosage and temperature. Experimental Cr(VI) adsorption equilibrium and kinetics data fitted well to Langmuir model. The calculated Langmuir maximum adsorption capacity (q_max) value of nanocomposite was 488 mg/g. Moreover, the highest quantity of Cr(VI) uptake was achieved of pH = 2 and 45℃ and TiO₂ and CS-TiO₂ had respective removal efficiencies of 94 and 87.5%. The thermodynamic parameters of Cr(VI) adsorption by nanocomposite affirm the spontaneous and endothermic nature of process. Chromium adsorption mechanism by CS-TiO₂ nanocomposite were proposed and discussed.

Development of Functional Hybrid Polymers and Gel Materials for Sustainable Membrane-Based Water Treatment Technology: How to Combine Greener and Cleaner Approaches

Water quality and disposability are among the main challenges that governments and societies will outside during the next years due to their close relationship to population growth and urbanization and their direct influence on the environment and socio-economic development. Potable water suitable for human consumption is a key resource that, unfortunately, is strongly limited by anthropogenic pollution and climate change. In this regard, new groups of compounds, referred to as emerging contaminants, represent a risk to human health and living species; they have already been identified in water bodies as a result of increased industrialization. Pesticides, cosmetics, personal care products, pharmaceuticals, organic dyes, and other man-made chemicals indispensable for modern society are among the emerging pollutants of difficult remediation by traditional methods of wastewater treatment. However, the majority of the currently used waste management and remediation techniques require significant amounts of energy and chemicals, which can themselves be sources of secondary pollution. Therefore, this review reported newly advanced, efficient, and sustainable techniques and approaches for water purification. In particular, new advancements in sustainable membrane-based filtration technologies are discussed, together with their modification through a rational safe-by-design to modulate their hydrophilicity, porosity, surface characteristics, and adsorption performances. Thus, their preparation by the use of biopolymer-based gels is described, as well as their blending with functional cross-linkers or nanofillers or by advanced and innovative approaches, such as electrospinning.

Fabricating Industry-Compatible Olefin-Linked COF Resins for Oxoanion Pollutant Scavenging

Large-scale and low-cost synthesis of covalent organic frameworks (COFs) to meet the demands of industrial application remains formidably challenge. Here we report using 2,4,6-collidine as monomer to produce a series of highly crystalline olefin-linked COFs by a melt polymerization method. This method enables the kilogram-scale fabrication of self-shaped monolithic robust foams. The afforded COFs possess extremely low cost (<50 USD/kg), superior to all the reported COFs. Furthermore, using one-pot or post-modification methods can conveniently transform neutral COFs to ionic COFs, which can be applied as highly efficient ion-exchange sorbents for scavenging oxoanion pollutants. Remarkably, the superior adsorption capacity of a model oxoanion (ReO₄ ^- ) is the highest among crystalline porous materials reported so far. This work not only expands the scopes of olefin-linked COFs but also enlightens the route for the industrial production of crystalline ion exchange sorbents.

Development of novel MOF-mixed matrix three-dimensional membrane capsules for eradicating potentially toxic metals from water and real electroplating wastewater

The stability and applicability of UiO-66-(NH₂)₂ metal-organic framework (MOF) nanoparticles (NPs) were successfully improved in this study by incorporating them into alginate biopolymer during the manifestation of crosslinking agents-calcium chloride and glutaraldehyde-via a simple, environment-friendly, and facile approach to eradicate potentially toxic metals (PTMs) such as Cr⁶⁺, Cr³⁺, Cu²⁺, and Cd²⁺ from water and real electroplating wastewater. Hydrophilic functional groups (i.e., -OH, -COOH, and -NH₂) are imperative in the smooth loading of UiO-66-(NH₂)₂ MOF- NPs into three-dimensional (3-D) membrane capsules (MCs). The X-ray photoelectron spectroscopy (XPS) results suggested that UiO-66-(NH₂)₂ MOF was effectively bonded in/on the capsule via electrostatic crosslinking between -H₃N⁺ and -COO^-. Scanning electron microscopy results revealed a porous honeycomb configuration of the 3-D SGMMCs (S: sodium alginate, G: glutaraldehyde, M: MOF NPs, and MCs: membrane capsules). The maximum monolayer absorption capacities for Cr⁶⁺, Cr³⁺, Cu²⁺, and Cd²⁺ were 495, 975, 1295, and 1350 mg/g, respectively. The results of Fourier transform infrared spectroscopy and XPS analyses showed that electrostatic attraction and ion exchange were the main processes for PTM removal used by the as-developed 3-D SGMMCs. The as-developed 3-D SGMMCs exhibited outstanding selectivity for removing the targeted PTMs under the specified pH/conditions and maintained >80% removal efficiency for up to six consecutive treatment cycles. Notably, > 60% removal efficiencies for Cr⁶⁺ and Cu²⁺ were observed when treating real electroplating wastewater. Therefore, the as-developed 3-D SGMMCs can be used as an exceptional multifunctional sorbent to remove and recover PTMs from real electroplating wastewater.