Preparation and characterization of amino/thiol bifunctionalized magnetic nanoadsorbent and its application in rapid removal of Pb (II) from aqueous system

Definitive Review of Nanobiochar

Nanobiochar is an advanced nanosized biochar with enhanced properties and wide applicability for a variety of modern-day applications. Nanobiochar can be developed easily from bulk biochar through top-down approaches including ball-milling, centrifugation, sonication, and hydrothermal synthesis. Nanobiochar can also be modified or engineered to obtain "engineered nanobiochar" or biochar nanocomposites with enhanced properties and applications. Nanobiochar provides many fold enhancements in surface area (0.4-97-times), pore size (0.1-5.3-times), total pore volume (0.5-48.5-times), and surface functionalities over bulk biochars. These enhancements have given increased contaminant sorption in both aqueous and soil media. Further, nanobiochar has also shown catalytic properties and applications in sensors, additive/fillers, targeted drug delivery, enzyme immobilization, polymer production, etc. The advantages and disadvantages of nanobiochar over bulk biochar are summarized herein, in detail. The processes and mechanisms involved in nanobiochar synthesis and contaminants sorption over nanobiochar are summarized. Finally, future directions and recommendations are suggested.

Magnetic anaerobic granular sludge for sequestration and immobilization of Pb

The development of magnetic adsorbents with high capacity to capture heavy metals has been the subject of intense research, but the process usually involves costive synthesis steps. Here, we propose a green approach to obtaining a magnetic biohybrid through in situ grown anaerobic granular sludge (AGS) with the help of magnetite, constituting a promising adsorbent for sequestration and immobilization of Pb in aqueous solutions and soils. The resultant magnetite-embedded AGS (M-AGS) was not only capable of promoting methane production but also conducive to Pb adsorption because of the large surface area and abundant function groups. The uptake of Pb on M-AGS followed the pseudo-second order, having a maximum adsorption capacity of 197.8 mg gDS^-1 at pH 5.0, larger than 159.7, 170.3, and 178.1 mg gDS^-1 in relation to AGS, F-AGS (ferrihydrite-mediated), and H-AGS (hematite-mediated), respectively. Mechanistic investigations showed that Pb binding to M-AGS proceeds via surface complexation, mineral precipitation, and lattice replacement, which promotes heavy metal capture and stabilization. This was evident from the increased proportion of structural Pb sequestrated from the aqueous solution and the enhanced percentage of the residual fraction of Pb extracted from the contaminated soils.

Efficiency and mechanism in preparation and heavy metal cation/anion adsorption of amphoteric adsorbents modified from various plant straws

Cellulose can be modified for the loading of functional groups such as amino groups, sulfydryl groups, and carboxyl groups. Cellulose-modified adsorbents generally have specific adsorption capacities for either heavy metal anions or cations, and possess the advantages of wide raw material source, high modification efficiency, high adsorbent recyclability, and great convenience in recovery of the adsorbed heavy metals. At present, preparation of amphoteric heavy metal adsorbents from lignocellulose has attracted great attention. However, the difference in efficiency of preparing heavy metal adsorbents by modification of various plant straw materials and mechanism for the difference remain to be further explored. In this study, three plant straws, including Eichhornia crassipes (EC), sugarcane bagasse (SB) and metasequoia sawdust (MS), were sequentially modified by tetraethylene-pentamine (TEPA) and biscarboxymethyl trithiocarbonate (BCTTC) to obtain amphoteric cellulosic adsorbents (EC-TB, SB-TB and MS-TB, respectively), which can simultaneously adsorb heavy metal cations or anions. The heavy metal adsorption properties and mechanism before and after modification were compared. Pb(II) and Cr(VI) removal rates by the three adsorbents were 2.2-4.3 folds and 3.0-13.0 folds of those before modification, respectively, following the order of MS-TB > EC-TB > SB-TB. In the five-cycle adsorption-regeneration test, the Pb(II) and Cr(VI) removal rate by MS-TB decreased by 58.1 % and 21.5 %, respectively. Among the three plant straws, MS possessed the most abundant hydroxyl groups and the largest specific surface area (SSA), and accordingly MS-TB had the highest load of adsorption functional groups [(C)NH, (S)CS and (HO)CO] and also the largest SSA among the three adsorbents, which contribute to its highest modification and adsorption efficiency. This study is of great significance for screening suitable raw plant materials to prepare amphoteric heavy metal adsorbents with superior adsorption performance.

Effective removal of Pb(II) ions using piperazine-modified magnetic graphene oxide nanocomposite; optimization by response surface methodology

In this research, the piperazine-modified magnetic graphene oxide (Pip@MGO) nanocomposite was synthesized and utilized as a nano-adsorbent for the removal of Pb(II) ions from environmental water and wastewater samples. The physicochemical properties of Pip@MGO nanocomposite was characterized by X-ray diffraction analysis (XRD), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Energy-dispersive X-ray spectroscopy (EDAX), Thermo-gravimetric analysis (TGA), Vibrating Sample Magnetometery (VSM) and Fourier-transform infrared spectroscopy (FT-IR) analysis. In this method, the batch removal process were designed by response surface methodology (RSM) based on a central composite design (CCD) model. The results indicated that the highest efficiency of Pb(II) removal was obtained from the quadratic model under optimum conditions of prominent parameters (initial pH 6.0, adsorbent dosage 7 mg, initial concentration of lead 15 mg L⁻¹ and contact time 27.5 min). Adsorption data showed that lead ions uptake on Pip@MGO nanocomposite followed the Langmuir isotherm model equation and pseudo-second order kinetic model. High adsorption capacity (558.2 mg g⁻¹) and easy magnetic separation capability showed that the synthesized Pip@MGO nanocomposite has great potential for the removal of Pb(II) ions from contaminated wastewaters.

Removal of nickel and copper ions in strongly acidic conditions by in-situ formed amyloid fibrils

The research investigated a novel strategy that can synchronously remove Ni²⁺ and Cu²⁺ by synthesizing amyloid fibrils under harsh conditions. The adsorption capacity of Ni²⁺ and Cu²⁺ increased by 18.5% and 34.1% respectively in the in-situ scenario as compared to that Ni²⁺ and Cu²⁺ were introduced after amyloid fibrils preparation, meantime, it avoids the generation of acidic waste liquid in the process of preparing amyloid fibrils. The adsorption behaviors of Ni²⁺ and Cu²⁺ can be well described by the pseudo-second-order kinetic model and Langmuir isotherm. The functional groups of amide, hydroxyl, and carboxyl played determining roles in the adsorption process. Moreover, when the amyloid fibrils were prepared in the presence of Ni²⁺ and Cu²⁺, i.e., the in-situ adsorption scenario, metal ions tended to occupy the functional sites, inhibit protein aggregation, and affect long amyloid fibrils synthesis accordingly. Metal ion-binding site prediction server was used to predict the binding sites of metal ions towards the protein sequence within amyloid fibrils, and the metal ion was observed to preferentially bind to a particular residue such as glutamic acid, cysteine, and serine. The amyloid fibrils be potentially valuable for the removal of heavy metals in strongly acidic wastewater such as acidic mining drainage.

Effective removal of Hg(II) and MeHg from aqueous environment by ball milling aided thiol-modification of biochars: Effect of different pyrolysis temperatures

In order to synthesize biochar with the enhanced adsorption of inorganic mercury (Hg(II)) and organic mercury (Methylmercury, MeHg), biochars pyrolyzed at different pyrolysis temperatures (300, 500, and 700 °C) were ball milled with 3-trimethoxysilylpropanethiol (3-MPTS). Characterization results showed that 3-MPTS acted as an activator which further enlarged pores in biochars and ball-milling increased surface area of biochars. During ball milling, oxygen-containing functional groups increased which facilitated the loading of -SH group. The maximum adsorption capacities for Hg(II) adsorption in ball mill sulfhydryl modified biochars of 300, 500, and 700 °C were 401.8, 379.6 and 270.6 mg/g, respectively; simultaneously, the maximum adsorption capacity of MeHg was 108.16, 85.27 and 39.14 mg/g, respectively, which showed preferential increasing of 5.54 times on MeHg compared to the non-thiol modified biochar at low pyrolysis temperature of 300 °C. Results of kinetic adsorption experiments suggested that sorption data fitted well with Pseudo-second-order kinetic model, which proved that the mainly rate-limiting adsorption step was surface diffusion. Langmuir isotherm model fitting result showed that ligand exchange, surface complexation, surface adsorption and electrostatic attraction are dominant removal mechanisms. The 3-MPTS content and ball milling time are crucial during ball milling, and 2% 3-MPTS and 30 h of ball milling were found to be the most suitable conditions for both Hg(II) and MeHg adsorption. The result suggests that ball milling aided thiol-modification has great potential in synthesis of -SH modified biochar with prioritized MeHg adsorption.

Adsorption and Removal of Mercury(II) by a Crosslinked Hyperbranched Polymer Modified via Sulfhydryl

In this study, the highly crosslinked hyperbranched polyamide-amines (H-PAMAMs) were first prepared via one-pot methods and then modified with thiourea to synthesize a novel adsorbent containing sulfhydryl groups (CHAP-SH), which was used to adsorb Hg(II) ions from aqueous solutions. The adsorption characteristics and mechanism of CHAP-SH for Hg(II) ions were systematically studied. As expected, CHAP-SH exhibited a rapid removal performance toward Hg(II), and the maximum adsorption capacity was 282.74 mg/g at 318 K and pH = 4.5. The whole adsorption behavior could be well described by the pseudo-second-order kinetic model and Langmuir and Redlich-Peterson adsorption isotherm models, which reflected that the adsorption process was mainly monolayer chemisorption. Meanwhile, CHAP-SH had strong selectivity for Hg(II) in the presence of multimetal ions, and it had excellent recoverability after five cycles. In order to further elucidate the adsorption mechanism, the adsorbents before and after adsorption were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, and energy-dispersive X-ray spectroscopy, and the results showed that the nitrogen-containing, oxygen-containing, and sulfur-containing groups in the adsorbent molecule had synergistic complexation with Hg(II). These results indicated that the adsorbents had great potential in the future treatment of aqueous solutions containing Hg(II).

Highly efficient and rapid Pb(ii) removal from acidic wastewater using superhydrophilic polystyrene phosphate resin

Novel superhydrophilic polystyrene phosphate resin was synthesized for efficient and rapid Pb(ii) removal from acidic wastewater.

A silanized magnetic amino-functionalized carbon nanotube-based multi-ion imprinted polymer for the selective aqueous decontamination of heavy metal ions

A novel adsorbent comprising a silanized magnetic amino-functionalized carbon nanotube-based multi-ion imprinted polymer is introduced as an ideal candidate for the simultaneous and selective adsorptive remediation of heavy metal ions from contaminated water.

Facile synthesis of core-shell phase-transited lysozyme coated magnetic nanoparticle as a novel adsorbent for Hg(II) removal in aqueous solutions

Adsorption using nanomaterials is considered an effective method for controlling the levels of toxic heavy metal in wastewater. Herein, a novel adsorbent, core-shell phase-transited lysozyme film-coated magnetic nanoparticles (Fe₃O₄@SiO₂@PTL) for Hg(II) ions removal from aqueous solutions was explored via facile and fast phase transformation and self-assembly process of lysozyme. The physiochemical properties of Fe₃O₄@SiO₂@PTL were investigated using various characterization techniques. The adsorption performances such as kinetics, isotherms, selectivity, the effect of coexisting ions, and regeneration were evaluated. Fe₃O₄@SiO₂@PTL showed an extremely high Hg(II) uptake rate and achieved more than 90% equilibrium adsorption capacity in 5 min. Hg(II) adsorption was followed by a pseudo-second-order kinetic model and fitted the Langmuir model by achieving a maximum uptake of 701.51 mg/g. Furthermore, excellent Hg(II) selectivity was obtained in a mixed solution containing various heavy metal ions, along with good chemical stability owing to the high adsorption capacity maintained after five cycles. The adsorption analyses indicated that the amino, imino, amide, hydroxyl, carboxyl, and thiol groups exposed on the surface of Fe₃O₄@SiO₂@PTL were vital for Hg(II) removal. Consequently, this work will significantly assist in the development of an easily available, eco-friendly, and selective adsorbent material to remove heavy metal ions from wastewater.

Ion exchange based approach for rapid and selective Pb(II) removal using iron oxide decorated metal organic framework hybrid

Polyacrylic acid capped Fe₃O₄ - Cu-MOF (i-MOF) hybrid was prepared for rapid and selective lead removal, with 93% removal efficiency, exceptional selectivity, and adsorption capacity of 610 mg/g and 91% of i-MOF hybrid could be easily separated from the contaminated water using magnetic separation. The adsorption process followed a pseudo-second-order model and the adsorption efficiency decreased from 93% to 83% on raising the temperature from 25 °C to 40 °C. The change in equilibrium adsorption capacity with respect to equilibrium adsorbate concentration followed the Langmuir isotherm model. i-MOF had a high selectivity coefficient and removal efficiency for lead ions even when exposed simultaneously with naturally abundant cations (Na(I), Ca(II), Mg(II)). Release of Cu(II) ions from the i-MOF after Pb(II) removal suggested suggested ion-exchange to be the dominant removal mechanism. This new finding for Pb(II) removal with excellent adsorption performance using i-MOF through ion exchange based approach is a viable option for treating lead contaminated water.

Highly effective stabilization of Cd and Cu in two different soils and improvement of soil properties by multiple-modified biochar

Heavy metal contamination in soil has attracted great attention worldwide. In situ stabilization has been considered an effective way to remediate soils contaminated by heavy metals. In the present research, a multiple-modified biochar (BCM) was prepared to stabilize Cd and Cu contamination in two different soils: a farmland soil (JYS) and a vegetable soil (ZZS). The results showed that BCM was a porous-like flake material and that modification increased its specific surface area and surface functional groups. The incubation experiment indicated that BCM decreased diethylenetriaminepentaacetic (DTPA)-extractable Cd and Cu by 92.02% and 100.00% for JYS and 90.27% and 100.00% for ZZS, respectively. The toxicity characteristic leaching procedure (TCLP)-extractable Cd and Cu decreased 66.46% and 100.00% for JYS and 46.33% and 100.00% for ZZS, respectively. BCM also reduced the mobility of Cd and Cu in soil and transformed them to more stable fractions. In addition, the application of BCM significantly increased the soil dehydrogenase, organic matter content and available K (p < 0.05). These results indicate that BCM has great potential in the remediation of Cd- and Cu-contaminated soil.

Comparative removal of As(V) and Sb(V) from aqueous solution by sulfide-modified α-FeOOH

Efficient elimination of As(V) and Sb(V) from wastewater streams has long been a major challenge. Herein, sulfide-modified α-FeOOH adsorbent was fabricated via a simple sulfidation reaction for removing As(V) and Sb(V) from aqueous media. Compared with the pristine α-FeOOH, sulfide-modified α-FeOOH increased the adsorption of As(V) from 153.8 to 384.6 mg/g, and Sb(V) adsorption from 277.8 to 1111.1 mg/g. The enhanced adsorption of both As(V) and Sb(V) was maintained at the pH range from 2 to 11, and was not interfered by various coexisting anions such as Cl^-, SO₄^2-, NO₃^-, SiO₃^2- and PO₄^3-. The adsorption affinity increased from 0.0047 to 0.0915 and 0.0053 to 0.4091 for As(V) and Sb(V), respectively. X-ray photoelectron spectroscopic investigation demonstrated a reductive conversion of As(V) to As(III) during the adsorption process with sulfide-modified α-FeOOH, but with no obvious variation of Sb(V) speciation. While the removal mechanism for As(V) was reduction followed by adsorption via hydroxyl groups, mainly surface complexation was involved in the removal of Sb(V). This study presented a simple strategy to enhance the adsorption capacity and adsorption affinity of α-FeOOH toward As(V)/Sb(V) via sulfide-modification.

Integration of Cynodon dactylon and Muraya koenigii plant extracts in amino-functionalised silica-coated magnetic nanoparticle as an effective sorbent for the removal of chromium(VI) metal pollutants

Immobilised magnetic nanoparticles are extensively used owing to their superparamagnetic nature, surface interaction, and binding specificity with the appropriate portentous substances. The present research focuses on the development of a portentous, robust carrier, which integrates the silica-coated amino-functionalised magnetic nanoparticle (AF-MnP) with the plant extracts of Cynodon dactylon (L1) and Muraya koenigii (L2) for the stable and enhanced removal of hazardous hexavalent chromium pollutant in the wastewater. Vibrating sample magnetometer (M_s - 45 emu/g) determines the superparamagnetic properties; Fourier-transform infrared spectroscopy determines the presence of functional groups such as NH₂, Si-O-Si, C=C; high-resolution transmission electron microscopy, field emission scanning electron microscope and energy-dispersive X-ray spectroscopy determine the size of the green adsorbents in the range of 20 nm and the presence of elements such as Fe, N, and Si determines the efficacy of the synthesised silica-coated AF-MnP. The AF-MnP-L1 shows the maximum adsorption capacity of 34.7 mg/g of sorbent calculated from the Langmuir isotherm model and the process follows pseudo-second-order kinetics. After treatment, the adsorbents can be easily separated from the solution in the presence of an external magnetic field and are reused for nine cycles after acid treatment with the minimal loss of adsorption efficiency.

Enhanced Pb(II) adsorption onto functionalized ordered mesoporous carbon (OMC) from aqueous solutions: the important role of surface property and adsorption mechanism

Functionalized ordered mesoporous carbon (MOMC-NP) was synthesized by chemical modification using HNO₃ and H₃PO₄ to enhance Pb(II) adsorption. The phosphate functional group represented by P-O-C bonding onto the surface of OMC was verified by FT-IR and XPS. Batch adsorption experiments revealed the improvement of adsorption capacity by 39 times over the virgin OMC. Moreover, the Pb(II) adsorption results provided excellent fits to Langmuir model and pseudo-second-order kinetic model. The adsorption mechanism of Pb(II) onto MOMC-NP revealed the formation of metal complexes with carboxyl, hydroxyl, and phosphate groups through ion exchange reactions and hydrogen bondings. The calculated activation energy was 22.09 kJ/mol, suggesting that Pb(II) adsorption was a chemisorption. At pH>pH_pzc, the main Pb(II) existing species of Pb(II) and Pb(OH)⁺ combine with the carboxyl, hydroxyl, and phosphate functional groups via electrostatic interactions and hydrogen bonding. All these findings demonstrated that MOMC-NP could be a useful and potential adsorbent for adsorptive removal of Pb(II). Graphical abstract.

Magnetic supramolecular polymer: Ultrahigh and highly selective Pb(II) capture from aqueous solution and battery wastewater

For the practical capture of heavy metal ions from wastewater, fabricating environmental friendly adsorbents with high stability and super adsorption capacity are pursuing issue. In this work, we develop magnetic supramolecular polymer composites (M-SMP) by using a simple two-step hydrothermal method. Systematical characterizations of morphological, chemical and magnetic properties were conducted to confirm the formation of M-SMP composites. The resulting M-SMP composites were applied to remove Pb(II) from aqueous solution and from real battery wastewater, and easy separation was achieved using a permanent magnet. By investigating the effects of various parameters, we optimized their operating condition for Pb(II) adsorption by the M-SMP. The uptake of Pb(II) onto M-SMP fitted well the pseudo-second-order and Langmuir isotherm models, and favourable thermodynamics showed a spontaneous endothermic process. The SMP endowed M-SMP with ultrahigh adsorption capacity for Pb(II) (946.9 mg g^-1 at pH = 4.0, T = 298 K), remarkable selectivity, satisfactory stability and desirable recyclability. In Pb-contaminated lead-acid battery industrial wastewater, the concentration of Pb(II) declined from 18.070 mg L^-1 to 0.091 mg L^-1, which meets the current emission standard for the battery industry. These merits, combined with simple synthesis and convenient separation, make M-SMP an outstanding scavenger for the elimination of industrial Pb(II) wastewater.

Facile Removal of Phytochromes and Efficient Recovery of Pesticides Using Heteropore Covalent Organic Framework-Based Magnetic Nanospheres and Electrospun Films

Nontargeted analysis of food safety requires selective removal of interference matrices and highly efficient recovery of chemical hazards. Porous materials such as covalent organic frameworks (COFs) show great promise in selective adsorption of matrix molecules via size selectivity. Considering the complexity of interference matrices, we prepared crystalline heteropore COFs whose two kinds of pores have comparable sizes to those of several common phytochromes, main interference matrices in vegetable sample analysis. By controlling the growth of COFs on the surface of Fe3O4 nanoparticles or by utilizing a facile co-electrospinning method, heteropore COF-based magnetic nanospheres or electrospun nanofiber films were prepared, respectively. Both the nanospheres and the films maintain the dual-pore structures of COFs and show good stability and excellent reusability. Via simple magnetic separation or immersion operation, respectively, they were successfully used for the complete removal of phytochromes and highly efficient recovery of 15 pesticides from the extracts of four vegetable samples, and the recoveries are in the range of 83.10-114.00 and 60.52-107.35%, respectively. Film-based immersion operation gives better sample pretreatment performance than the film-based filtration one. This work highlights the great application potentials of heteropore COFs in sample pretreatment for nontargeted analysis, thus opening up a new way to achieve high-performance sample preparation in many fields such as food safety analysis, environment monitoring, and so on.

Total recycle strategy of phosphorus recovery from wastewater using granule chitosan inlaid with γ-AlOOH

Eutrophication which caused by excessive phosphorus in aquatic environment is a worldwide problem. Phosphorus is a nonrenewable resource widely used in agriculture and industry. Therefore, the development of economical methods for phosphorus capture and reuse from wastewater is urgently needed. In this study, a novel granule chitosan inlaid with γ-AlOOH on its structure (γ-AlOOH@CS) was prepared for phosphate removal with a recycle manner. Results showed that γ-AlOOH@CS exhibited a fast phosphate removal of 0.5 h for half adsorption capacity. The material presented a high adsorption capacity of 45.82 mg/g, the adsorption capacity maintained stability at pH 4-6, and favorable selectivity was observed when compared with other common anions. Column experiment was also performed well in treatment of the simulated wastewater. Isotherms and thermodynamics studies indicated that phosphate adsorption onto γ-AlOOH@CS was heterogeneous, spontaneous and exothermic. In material recycle experiment, by using NaOH solution as solvent and phosphoric acid as precipitant under hydrothermal reaction conditions, the products of chitosan, aluminum phosphate and sodium dihydrogen phosphate were obtained, with their purity reaching the industrial standard. Meanwhile, chitosan can be reused for new γ-AlOOH@CS preparation. This study provides a total recycle strategy of phosphorus removal from wastewater.

Thiol-modified biochar synthesized by a facile ball-milling method for enhanced sorption of inorganic Hg2+ and organic CH3Hg. JOURNAL OF HAZARDOUS MATERIALS 2020;384:121357. [PMID: 31630859 DOI: 10.1016/j.jhazmat.2019.121357]

Modification of thiol on biochar often demands complex synthetic procedures and chemicals. In this work, a simple and environment friendly thiol-modified biochar (BMS-biochar) was successfully synthesized by ball milling pristine biochar with 3-mercaptopropyltrimethoxysilane (3-MPTS). The resultant BMS-biochar was characterized and tested for aqueous inorganic Hg²⁺ and organic CH₃Hg⁺ removal. Characterization results showed that 3-MPTS was loaded on the surface of biochar through oxygen-containing functional groups (i.e., OH and CO) and π-π bond. Ball milling method improved the properties of BMS-biochar, namely, more efficient SH load, a larger surface area, more functional groups, more negatively charged surface, which resulted in higher removal efficiency of Hg²⁺ and CH₃Hg⁺ (320.1 mg/g for Hg²⁺ and 104.9 mg/g for CH₃Hg⁺) compared to the pristine biochar (105.7 mg/g for Hg²⁺ and 8.21 mg/g for CH₃Hg⁺) and thiol-modified biochar through chemical impregnation (CIS-biochar) (175.6 mg/g for Hg²⁺ and 58.0 mg/g for CH₃Hg⁺). Ball milling increased the sorption capacities of Hg²⁺ and CH₃Hg⁺ through surface adsorption, electrostatic attraction, ligand exchange, and surface complexation. Modeling results suggested that the surface diffusion was the rate-limiting adsorption step for BMS-biochar. This work gave prominence to the potential of ball milling for the preparation of thiol-modified biochar to remove mercury especially organic CH₃Hg⁺ by adsorption.

Removal of Pb(II) Ions from Wastewater by Using Polyethyleneimine-Functionalized Fe3O4 Magnetic Nanoparticles

A class of polyethyleneimine (PEI)-functionalized Fe3O4 magnetic nanoparticles (MNPs) has been facilely produced through a solvothermal process. The synthetic MNPs have been characterized by multiple technologies and then used for Pb(II) ion sorption from the aqueous media in different conditions. It was found the Pb(II) adsorption behaviors could be well fitted by the pseudo second-order kinetic and Langmuir isotherm models. The maximum Pb(II) adsorption capacity at 25 °C and pH 5.0 was calculated to be 60.98 mg/g. Moreover, effects of temperature, pH, and electrolyte of aqueous phase on the Pb(II) adsorption capacity of MNPs have been carefully examined. The Pb(II) adsorbing capacity was enhanced with temperature or pH rising, but reduced with the addition of various electrolytes. Additionally, the recyclability of synthetic MNPs has been also assessed. The prepared PEI-functionalized MNPs could still maintain good adsorption performance after five cycles of Pb(II) removal. These results indicated that the PEI-functionalized Fe3O4 MNPs could be readily synthesized and served as a desirable and economic adsorbent in Pb(II)-contaminated wastewater treatment.

Functionalized Poly(arylene ether nitrile) Porous Membrane with High Pb(II) Adsorption Performance

Porous materials with high specific surface area possess a broad application prospect in the treatment of wastewater. In this work, sulfonated poly(arylene ether nitrile) (SPEN) functionalized with a carboxylic acid group was successfully synthesized, which was subsequently transformed into SPEN porous membranes with cetyltrimethyl ammonium bromide (CTAB) as pore-forming agents to study the adsorption performance for lead ions in aqueous solution. Then, experiments were conducted to investigate the effect of pH, contact time and initial solution concentration on the adsorption performance of porous membranes, and the adsorption capacities of porous membranes with different content (0, 5 and 15 wt %) of CTAB were 183.60, 161.73 and 127.43 mg/g, respectively, which manifested that the adsorption capacity decreased with the increase of CTAB. The adsorption capacities of porous membranes increased with the increase of the initial concentration of lead ions, and the maximum reached was 246.96 mg/g. The simulation of adsorption kinetics revealed that the adsorption was accorded with the pseudo-second-order kinetic model and Langmuir equation, indicating that the adsorption process followed Langmuir monolayer adsorption. Thermogravimetric analysis demonstrated that the porous membranes had excellent thermodynamic properties both before and after adsorption. In addition, the change of adsorption peak in the Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) spectrum indicated that the absorption performance of porous membranes for lead ions benefited from the chelation between lead ions and the carboxylic acid group on SPEN. Moreover, the porous membranes maintained excellent adsorption properties after circulating five times under the conditions of acidic or alkaline, and the cycle regeneration effect was outstanding.