A highly sensitive perovskite oxide sensor for detection of p-phenylenediamine in hair dyes

Determination of 11 Kinds of Hair Dyes in Hair-Dyeing Products by Liquid Chromatography-Tandem Mass Spectrometry

Eleven kinds of hair dyes were determined in hair-dyeing products by liquid chromatography-tandem mass spectrometry (MS). The samples were extracted with ultrasound in methanol for 20 min. After centrifugation, the supernatant was diluted with 10% methanol/90% water (v/v). Then, the solution was analyzed by Shim-pack Scepter C18-120 column (100 mm × 2.1 mm, 1.9 μm) plus electrospray ionization-MS/MS. Matrix-matched standard solutions were used to analyze the samples. The limits of detection were from 0.15 to 10 mg/kg, the limits of quantification were from 0.5 to 40 mg/kg and the recovery was from 79.4 to 109.2%. The protocol was selective and accurate and was satisfyingly applied to analyze hair dyes in different kinds of commercial products. 1-Hydroxyethyl-4,5-diaminopyrazole sulfate, hydroxyethyl-p-phenylenediamine sulfate, 2-methyl-5-hydroxyethylaminophenol, 5-amino-6-chloro-o-cresol, 3-nitro-p-hydroxyethylaminophenol and 2-amino-6-chloro-4-nitrophenol were detected in 10 samples with the concentrations between limits of detection and quantification to 9.27 × 104 mg/kg.

Preparation and p-phenylenediamine detection mechanism of a dialdehyde cellulose and a 7-amino-4-methylcoumarin-based fluorescent probe

A novel fluorescent probe, fluorescent dialdehyde cellulose (FDAC), was prepared to detect p-phenylenediamine (PPD) in water samples conveniently and quickly. This was achieved by grafting 7-amino-4-methylcoumarin (AMC) onto dialdehyde cellulose (DAC) via an aldol-amine condensation reaction. This method is greener, more economical, and simpler than existing methods for preparing fluorescent probes. The probe was found to be more effective for PPD detection in polar solvents, with less interference from pH and other compounds present in the sample matrix. The photoluminescence of FDAC at λex/λem = 340/430 nm was statically quenched by PPD, allowing for accurate detection within the range of 10-100 μmol/L under optimal conditions, with a detection limit of 3.2 μmol/L (3 σ/s). Meanwhile, the Schiff base (-C=N- group) generated by the condensation of DAC and AMC increased the reaction activity of the fluorescent moiety and changed the AMC conjugated structure, making FDAC more susceptible to aminolysis with PPD than AMC. This study presents a promising solution for fluorescence detection of aniline compounds, with significant potential for application in fields such as environmental analysis.

Recent advances in perovskite oxides for non-enzymatic electrochemical sensors: A review

Non-enzymatic electrochemical sensors with significant advantages of high sensitivity, long-term stability, and excellent reproducibility, are one promising technology to solve many challenges, such as the detection of toxic substances and viruses. Among various materials, perovskite oxides have become a promising candidate for use in non-enzymatic electrochemical sensors because of their low cost, flexible structure, and high intrinsic catalytic activity. A comprehensive overview of the recent advances in perovskite oxides for non-enzymatic electrochemical sensors is provided, which includes the synthesis methods of nanostructured perovskites and the electrocatalytic mechanisms of perovskite catalysts. The better sensing performance of perovskite oxides is mainly due to the lattice O vacancies and superoxide oxygen ions (O₂^2-/O^-), which are generated by the transfer of lattice oxygen to adsorbed -OH and have performed excellent properties suitable for electrooxidation of analytes. However, the limited electron transfer kinetics, stability, and selectivity of perovskite oxides alone make perovskite oxides far from ready for scientific development. Therefore, composites of perovskite oxides with other materials like graphitic carbon, metals, metal compounds, conducting organics, and biomolecules are summarized. Furthermore, a brief section describing the future challenges and the corresponding recommendation is presented in this review.

Participation of Lattice Oxygen in Perovskite Oxide as a Highly Sensitive Sensor for p-Phenylenediamine Detection

The harmful effects on the human body from p-phenylenediamine (PPD) in hair dyes can cause allergies and even cancer. Therefore, it is particularly important to accurately control and detect the content of PPD in our daily products and environment. Here, a small amount of non-metallic elemental P doped in perovskite oxide of SrCoO_3-δ (SC) forms a good catalytic material, SrCo_0.95P_0.05O_3-δ (SCP), for PPD detection. The improved performance compared with that of the parent SC can be attributed to three contributing factors, including a larger amount of highly oxidative oxygen species O^22-/O^-, better electrical conductivity, and more active sites on the P⁵⁺-oxygen bonds of SCP. Moreover, the lattice oxygen mechanism (LOM) with highly active species of lattice O vacancies and adsorbed -OO for electrocatalytic oxidation of PPD by the SCP/GCE (glass carbon electrode) sensor is proposed in our work. More importantly, the SCP/GCE sensor exhibits good stability, a low limit of detection, and high reliability (error < 5.78%) towards PPD determination in real samples of hair dyes, suggesting the substantial research potential for practical applications.

Ratiometric electrochemical sensing platform based on N-doped MOF-derived CoNi/C for the determination of p-phenylenediamine in hair dyes

A stable ratiometric electrochemical sensing platform is introduced for the determination of p-phenylenediamine (PPD). Specifically, the proposed sensing platform employs nitrogen-doped MOF pyrolysis-derived CoNi/C (N-CoNi/C) which was deployed as the sensing agent and methylene blue (MB) as the internal reference, and the MB combined with N-CoNi/C nanomaterials by a simple immersion adsorption process. Full characterization of N-CoNi/C was carried out with respect to morphology, composition, and electrochemical behavior, and the sensing performance of the ratiometric electrochemical sensing platform was evaluated. Complete separation of the oxidation peaks of PPD and MB was achieved using the MB/N-CoNi/C composite modified glassy carbon electrode (MB/N-CoNi/C/GCE) and their ratio signals were used for quantitative determination of PPD. The electrical signal was linearly related to the concentration of PPD in the concentration range 0.3-100 μM, with a fitted correlation coefficient of 0.9987 and a detection limit of 0.091 μM (S/N = 3). Additionally, the sensor has been successfully used for the determination of PPD in commercial hair dyes with a recovery rate of over 95%.

Two-Dimensional Red Phosphorus Nanosheets: Morphology Tuning and Electrochemical Sensing of Aromatic Amines

Synthesis of 2D materials with different morphologies is of significance to reveal their morphology-dependent properties and further explore their morphology-dependent applications. This work reports the synthesis of 2D red phosphorus nanosheets (RPNSs) with different thicknesses by means of a phosphorus-amine method together with regulated electrophilicity of the solution. With graphene as the support, the RPNSs produced in 0.01 m HCl feature a unique 2D nanostructure, uniform distribution, and excellent electrochemical performance. Originating from the reacted characteristics between phosphorus and amine, the interaction of aniline with the RPNSs is clarified theoretically and experimentally by means of density functional theory, X-ray photoelectron spectroscopy, and voltammetry. A covalent bond is confirmed to be formed during the deprotonation of aniline and its binding energy reaches -2.31 eV. Stemming from such an adsorption process, different aromatic amines (e.g., p-nitroaniline, p-phenylenediamine) are sensitively and selectively monitored on the RPNSs. Consequently, this work provides a new way to clarify morphology-dependent properties and applications of novel 2D materials.

Sol-gel auto combustion synthesis, characterization, and application of Tb2FeMnO6 nanostructures as an effective photocatalyst for the discoloration of organic dye contaminants in wastewater

In this study, the auto-combustion sol-gel method was used to prepare novel Tb2FeMnO6 (TFMO) double perovskite nanoparticles. Chemical and natural fuels were used to achieve these particles with appropriate size. The resulting particles were examined via X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) techniques. Rietveld analysis was also performed to confirm the crystallinity and lattice parameters of the formed particles. The particles obtained in the presence of maleic acid were selected as the optimal sample (S4), and the particles obtained in the presence of pomegranate paste were chosen as the non-optimal sample (S8) in terms of size and morphology. Both particles were used to investigate the photocatalytic activity. Fourier transform infrared spectroscopy (FTIR), UV-Vis diffuse reflectance spectroscopy (DRS), and vibrating sample magnetometer (VSM) analyses and N2 adsorption/desorption isotherms were performed for both samples and the results were compared. Erythrosine and malachite green dyes in aqueous solutions were used as contaminants in the photocatalysis process. The results showed 22% and 20% discoloration for S4 and 41% and 30% discoloration for S8 in the presence of erythrosine and malachite green under visible light irradiation. The photocatalytic activity was investigated under UV light for S4, which showed 80% and 50% discoloration for erythrosine and malachite green, respectively. Investigating the photocatalytic activity of TFMO double perovskite nanoparticles showed that these nanoparticles could be a desirable option for mitigating water pollution.

Hair chemicals may increase breast cancer risk: A meta-analysis of 210319 subjects from 14 studies

BACKGROUND

The association between personal hair dye use and breast cancer risk is currently debated. The aim of this work is to investigate the association between the use of hair care products and breast cancer risk in women.

METHODS

Based on the PRISMA-IPD statement, the PubMed, Embase, Cochrane Library, Web of Science, OVID and Scopus databases were used to identify eligible studies published from inception to 22 April 2020. A pooled odds ratio (OR) with a 95% confidential interval (CI) was calculated to assess this correlation via fixed- or random-effect Mantel-Haenszel models using a heterogeneity Chi2 test with a significance level of p<0.1. All statistical tests were performed using StataSE software (version 12.0).

RESULTS

The analyzed data comprised 14 eligible studies with 210319 unique subjects. The pooled results suggested that there was a significant association between the use of hair dyes and breast cancer occurrence (pooled OR = 1.07; 95% CI, 1.01-1.13). Regarding the individual analysis regarding the different types of hair chemicals, permanent hair dye users (pooled OR = 1.08; 95% CI, 1.03-1.14) and rinse users (pooled OR = 1.17; 95% CI, 1.02-1.35) were both found to have a significantly elevated breast cancer risk compared to natural hair subjects, whereas there was an insignificant relationship between the use of semipermanent hair dyes (pooled OR = 1.09; 95% CI, 0.92-1.28) and straighteners (pooled OR = 1.04; 95% CI, 0.96-1.14) and breast cancer risk. No impact on the overall correlation between hair dyes and breast cancer risk due to race (White vs non-White) (pooled OR = 1.05; 95% CI, 0.86-1.29), timing of use (<10 years vs ≥10 years) (pooled OR = 0.96; 95% CI, 0.85-1.08) or dye color (Darker than natural hair vs Lighter than natural hair) (pooled OR = 0.91; 95% CI, 0.62-1.32) was found.

CONCLUSIONS

Chemicals in hair dyes may play a role in breast carcinogenesis and increase breast cancer risk.

Sensitive and visual detection of p-phenylenediamine by using dialdehyde cellulose membrane as a solid matrix

A novel method was developed for the sensitive and visual detection of p-phenylenediamine (PPD) via immobilizing the target specie PPD on dialdehyde cellulose membrane (DCM) followed by the reaction with salicylaldehyde. The obtained solid fluorescent membrane (S-PPD-DCM) emitted yellow fluorescence under 365 nm UV light. DCM was not only used as a solid matrix but also played a vital role in the enrichment of PPD. Experimental variables influencing the fluorescence signal were investigated and optimized. Under the optimum conditions, a detection limit of 5.35 μg L^-1 was obtained and two linear ranges were observed at 10-100 and 100-1000 μg L^-1, respectively. Moreover, the fluorescence of the resultant membrane can still be visualized by naked eye when PPD concentration was 50 μg L^-1. The detection of PPD was hardly affected by the coexistence of 1 mg L^-1 of o-phenylenediamine, m-phenylenediamine or phenylamine, exhibiting good selectivity. The developed method involved in a two-step Schiff base reaction and enhanced the fluorescence emission via blocking nonradiative intramolecular rotation decay of the excited molecules. It was applied to determine the PPD in spiked hair dye with satisfactory results.

Review on Sensing Applications of Perovskite Nanomaterials

Recently, perovskite-based nanomaterials are utilized in diverse sustainable applications. Their unique structural characteristics allow researchers to explore functionalities towards diverse directions, such as solar cells, light emitting devices, transistors, sensors, etc. Many perovskite nanomaterial-based devices have been demonstrated with extraordinary sensing performance to various chemical and biological species in both solid and solution states. In particular, perovskite nanomaterials are capable of detecting small molecules such as O2, NO2, CO2, etc. This review elaborates the sensing applications of those perovskite materials with diverse cations, dopants and composites. Moreover, the underlying mechanisms and electron transport properties, which are important for understanding those sensor performances, will be discussed. Their synthetic tactics, structural information, modifications and real time sensing applications are provided to promote such perovskite nanomaterials-based molecular designs. Lastly, we summarize the perspectives and provide feasible guidelines for future developing of novel perovskite nanostructure-based chemo- and biosensors with real time demonstration.

In situ growth of nanoflake and nanoflower-like Ni hydrated hydroxide on the surface of Ni foam as a free-standing electrode for high-performance phosphate detection

Environmental pollution has always been a global concern, e.g. water eutrophication caused by the high concentrations of phosphorous. It is especially important to detect harmful substances conveniently, quickly and accurately. This study reports a free-standing electrode composed of Ni foam (NF) and in situ grown nanoflakes and nanoflower-like Ni hydrated hydroxide (NHH) on the NF surface (NHH/NF) by a one-step hydrothermal method for phosphate detection. The NHH/NF electrode was directly applied as a binder-free and conductive agent-free working electrode in a three electrode system and showed a wide linear detection range of 10-50,000 μM, high sensitivities of 210 and 87 μA mM^-1 cm^-2 for the phosphate concentration ranges of 10-14,000 and 14,000-50,000 μM, respectively, and a fast response time of 6 s for phosphate detection in a NaOH solution (pH≈11). The nanostructure of the NHH layer not only provided a large surface area and rapid electron transfer but also protected the NF substrate from being degraded by the electrolyte and interfering species, thereby achieving good stability and selectivity. In addition, for artificial and real wastewater detection, the good recover ability presented here improves the prospects of developing a cost-effective, simple, and accurate sensor for phosphate detection.

G. S, Suvina V, Sakar M, Balakrishna RG. Perovskite nanomaterials as optical and electrochemical sensors

The perovskite family is comprised of a great number of members because of the possible and flexible substitution of numerous ions in its system.

The Bio-Safety Concerns of Three Domestic Temporary Hair Dye Molecules: Fuchsin Basic, Victoria Blue B and Basic Red 2

Hair-coloring products include permanent, semi-permanent and temporary dyes that vary by chemical formulation and are distinguished mainly by how long they last. Domestic temporary hair dyes, such as fuchsin basic, basic red 2 and Victoria blue B, are especially popular because of their cheapness and facile applications. Despite numerous studies on the relationship between permanent hair dyes and disease, there are few studies addressing whether these domestic temporary hair dyes are associated with an increased cancer risk. Herein, to ascertain the bio-safety of these temporary hair dyes, we comparatively studied their percutaneous absorption, hemolytic effect and cytotoxic effects in this paper. Furthermore, to better understand the risk of these dyes after penetrating the skin, experimental and theoretical studies were carried out examining the interactions between the dyes and serum albumins as well as calf thymus (CT)-DNA. The results showed that these domestic temporary hair dyes are cytotoxic with regard to human red blood cells and NIH/3T3 cell lines, due to intense interactions with bovine serum albumin (BSA)/DNA. We conclude that the temporary hair dyes may have risk to human health, and those who use them should be aware of their potential toxic effects.