Ultra-thin iron phosphate nanosheets for high efficient U(VI) adsorption

Facile and scalable synthesis of functionalized hierarchical porous polymers for efficient uranium adsorption

Efficient uranium capture from wastewater holds great importance for the environmental remediation and sustainable development of nuclear energy, but it is a tremendous challenge. Herein, a facile and scalable approach is reported to fabricate functionalized hierarchical porous polymers (PPN-3) decorated with high density of phosphate groups for uranium adsorption. The as-constructed hierarchical porous structure could allow rapid diffusion of uranyl ions, while abundant phosphate groups that serve as adsorption sites could provide the high affinity for uranyl. Consequently, PPN-3 shows a high uranium adsorption uptake of 923.06 mg g-1 and reaches adsorption equilibrium within simply 10 min in uranium-spiked aqueous solution. Moreover, PPN-3 affords selective adsorption of uranyl over multiple metal ions and possesses a rapid and high removal rate of U(VI) in real water systems. Furthermore, this study offers direct polymerization strategy for the cost-effective fabrication of phosphate-functionalized porous organic polymers, which may provide promising application potential for uranium extraction.

Zeolitic Imidazole Framework (ZIF)-Sponge Composite for Highly Efficient U(VI) Elimination

Herein, a zeolitic imidazole framework (ZIF-67) composite was prepared by a rapid, simple and inexpensive situ hybridization technique applying polyurethane sponge (PU) as support, which was designated as ZIF-67-PU. The ZIF-67 nanoparticle was successfully supported on the surface of sponge skeletons mainly through electrostatic attraction as well as probable π-π stacking interactions with PAM modification of the sponge. The resultant ZIF-67-PU exhibited a remarkably enhanced U(VI) elimination capacity of 150.86 mg∙g-1 on the basis of the Langmuir isotherm model, in comparison to pristine sponge. Additionally, the mechanism for U(VI) elimination was mainly achieved through the complex reaction between C-N(H)/-OH groups in ZIF-67 and U(VI), based on XPS investigations. ZIF-67-PU represents a simple, feasible and low-cost disposal option for preparing ZIF-coated sponges of any shape that can enhance the U(VI) elimination capacity. Furthermore, this approach can be widely applied to the preparation of various kinds of MOF-sponges through this situ hybridization technique.

Graphitic N-doped biochar for superefficient uranium recycling from nuclear wastewater

N-doped biochar (AL-N/BC) prepared by pyrolyzing lignin in various temperatures manifested superefficient performance for uranium (U) recycling from nuclear wastewater. The optimist AL-N/BC-700 showed higher adsorption capacity of 25,000 mg/g and faster kinetics of 4100 g·min^-1·mg^-1 than the most of reported adsorbents, and excellent adsorption-desorption capability (adsorption rate > 90 % and desorption rate > 70 % after 12 cycles). Moreover, the high applicability of AL-N/BC-700 was verified by its superefficient U(VI) adsorption performance in a broad working pH range, various water matrices, and high irradiation stability. Furthermore, the adsorption mechanism discloses the significant role of graphitic N, rather than pyridinic N or pyrrolic N, for U(VI) adsorption. Overall, this work not only presents an applicable approach to alleviate the increasingly serious energy crisis via recycling U(VI) from nuclear wastewater, but also enriches the method of synthesizing N-doped materials for U(VI) adsorption.

Efficient removal of uranium(VI) from aqueous solution by a novel phosphate-modified biochar supporting zero-valent iron composite

Uranium (U) is an important strategic resource as well as a heavy metal element with both chemical and radiotoxicity. At present, the rapid and efficient removal of uranium from wastewater remains a huge challenge for environmental protection and ecological security. In this paper, phosphate-modified biochar supporting nano zero-valent iron (PBC/nZVI) was triumphantly prepared and fully characterized. The introduction of polyphosphate can greatly increase the specific surface area of biochar pores, and then the zero-valent iron can be evenly distributed on the surface of material, thus leading to excellent removal performance of the PBC/nZVI for U(VI). The theoretical maximum U(VI) removal capacity of PBC/nZVI was up to 967.53 mg/g at pH 5. The results of adsorption kinetics, isotherm, and thermodynamics showed that the adsorption of uranium by PBC/nZVI was a monolayer physical adsorption and endothermic reaction. And the PBC/nZVI has favorable selectivity toward uranium against the interference of coexisting metal ions. Further mechanism studies show that the excellent uranium removal performance of PBC/nZVI is mainly attributed to the synergistic effect of physical adsorption and chemical reduction. This work proves that the PBC/nZVI has a wide application prospect in the field of uranium wastewater treatment.

Highly Efficient Removal of Uranium from an Aqueous Solution by a Novel Phosphonic Acid-Functionalized Magnetic Microsphere Adsorbent

The development of adsorption materials which can efficiently isolate and enrich uranium is of great scientific significance to sustainable development and environmental protection. In this work, a novel phosphonic acid-functionalized magnetic microsphere adsorbent Fe₃O₄/P (GMA-MBA)-PO₄ was developed by functionalized Fe₃O₄/P (GMA-MBA) prepared by distill-precipitation polymerization with O-phosphoethanolamine. The adsorption process was endothermic, spontaneous and kinetically followed the pseudo second-order model. The maximum uranium adsorption capacity obtained from the Langmuir model was 333.33 mg g^-1 at 298 K. In addition, the adsorbent also had good acid resistance and superparamagnetic properties, which could be quickly separated by a magnetic field. XPS analysis showed that the adsorption of adsorbent mainly depended on the complexation of phosphonic acid group with uranium. This work offers a promising candidate for the application of magnetic adsorbents in the field of uranium separation and enrichment.

Easily synthesized mesoporous aluminum phosphate for the enhanced adsorption performance of U(VI) from aqueous solution

High-yield selective adsorbents and suitable modification methods are both significant for the efficient treatment of U-contaminated wastewater. In this work, a rich-mesoporous aluminum phosphate adsorbent (APO-10) was synthesized by simply increasing the mass of reactants under a fixed solvent volume. After increasing the mass of reactants ten times, APO-10 has the added defect level, the increased specific surface area, and mesoporous structure, and the increased number and enhanced adsorption ability of adsorption active sites (phosphorus-oxygen groups) on the surface, resulting in an enhanced adsorption performance of U(VI) in various environmental conditions. Its ultrahigh adsorption capacity calculated by the Langmuir model can reach 826.44 mg g^-1 at pH = 5.5 and T = 298 K. Its crystal structure did not change after adsorption and remained at 584.40 mg g^-1 after 6 cycles. Additionally, APO-10 shows an excellent uranium-selectivity over 68% from a mixed aqueous solution and has excellent applicability in the acidic and alkaline environment based on dynamic adsorption and desorption column experiments. This study not only provides a high-yield efficient selective adsorbent (APO-10) with excellent anti-radiation structure stability for the treatment of radioactive contamination but also provides a feasible modification method by simply increasing the mass of reactants.

The detection and characterization techniques for the interaction between graphene oxide and natural colloids: A review

The high dispersibility of graphene oxide (GO) and the universality of natural colloids (clay minerals, (hydr)oxides of Al, Fe, silica, etc.) make them interact easily. Many kinds of analytical methods have been used to study the interaction between GO and natural colloids. This review provides a comprehensive overview of analytical methods for the detection and quantification of interaction process. We highlighted the influence of the most relevant environmental factors (ionic strength, pH, etc.) on batch experiment, quartz crystal microbalance with dissipation monitoring measurements, and column experiments. Besides, the benefits and drawbacks of spectroscopic, microscopic techniques, theoretical models, calculation and time-resolved dynamic light scattering methods also have discussed in this work. This review can give some guidance to researchers in their selection and combination of the technique for the research of the interaction between GO and natural colloids.

Phosphate group functionalized magnetic metal-organic framework nanocomposite for highly efficient removal of U(VI) from aqueous solution

The phosphate group functionalized metal-organic frameworks (MOFs) as the adsorbent for removal of U(VI) from aqueous solution still suffer from low adsorption efficiency, due to the low grafting rate of groups into the skeleton structure. Herein, a novel phosphate group functionalized metal-organic framework nanoparticles (denoted as Fe₃O₄@SiO₂@UiO-66-TPP NPs) designed and prepared by the chelation between Zr and phytic acid, showing fast adsorption rate and outstanding selectivity in aqueous media including 10 coexisting ions. The Fe₃O₄@SiO₂@UiO-66-TPP was properly characterized by TEM, FT-IR, BET, VSM and Zeta potential measurement. The removal performance of Fe₃O₄@SiO₂@UiO-66-TPP for U(VI) was investigated systematically using batch experiments under different conditions, including solution pH, incubation time, temperature and initial U(VI) concentration. The adsorption kinetics, isotherm, selectivity studies revealed that Fe₃O₄@SiO₂@UiO-66-TPP NPs possess fast adsorption rates (approximately 15 min to reach equilibrium), high adsorption capacities (307.8 mg/g) and outstanding selectivity (S_u = 94.4%) towards U(VI), which in terms of performance are much better than most of the other magnetic adsorbents. Furthermore, the adsorbent could be reused for U(VI) removal without obvious loss of adsorption capacity after five consecutive cycles. The research work provides a novel strategy to assemble phosphate group-functionalized MOFs.

Fast and Efficient Removal of Uranium onto a Magnetic Hydroxyapatite Composite: Mechanism and Process Evaluation

The exploration and rational design of easily separable and highly efficient sorbents with satisfactory capability of extracting radioactive uranium (U)-containing compound(s) are of paramount significance. In this study, a novel magnetic hydroxyapatite (HAP) composite (HAP@ CoFe2O4), which was coupled with cobalt ferrite (CoFe2O4), was rationally designed for uranium(VI) removal through a facile hydrothermal process. The U(VI) ions were rapidly removed using HAP@ CoFe2O4 within a short time (i.e., 10 min), and a maximum U(VI) removal efficiency of 93.7% was achieved. The maximum adsorption capacity (Qmax) of the HAP@CoFe2O4 was 338 mg/g, which demonstrated the potential of as-prepared HAP@CoFe2O4 in the purification of U(VI) ions from nuclear effluents. Autunite [Ca(UO2)2(PO4)2(H2O)6] was the main crystalline phase to retain uranium, wherein U(VI) was effectively extracted and immobilized in terms of a relatively stable mineral. Furthermore, the reacted HAP@CoFe2O4 can be magnetically recycled. The results of this study reveal that the suggested process using HAP@CoFe2O4 is a promising approach for the removal and immobilization of U(VI) released from nuclear effluents.

Amino-functionalized POSS nanocage-intercalated titanium carbide (Ti3C2Tx) MXene stacks for efficient cesium and strontium radionuclide sequestration

In this work, we prepared two-dimensional (2D) stack-structured aminopropylIsobutyl polyhedral oligomeric silsesquioxane (POSS-NH₂) intercalated titanium carbide (Ti₃C₂T_x) MXene material (Ti₃C₂T_x/POSS-NH₂) using a post-intercalation strategy as a potential adsorbent for the removal of cesium (Cs⁺) and strontium (Sr²⁺) ions from aqueous solutions. Ti₃C₂T_x/POSS-NH₂ exhibited unprecedented adsorption capacities of 148 and 172 mg g^-1 for Cs⁺ and Sr²⁺ ions, respectively. Batch adsorption experimental data well fitted the Freundlich isotherm model, which revealed multilayer adsorption of Cs⁺ and Sr²⁺ ions onto heterogeneous -OH, -F, -O, and -NH₂ adsorption sites of Ti₃C₂T_x/POSS-NH₂ with different energies. Ti₃C₂T_x/POSS-NH₂ exhibited rapid Cs⁺/Sr²⁺ ions adsorption kinetics and attained equilibrium within 30 min. Also, Ti₃C₂T_x/POSS-NH₂ exhibited recyclable capability over three cycles and remarkable selectivities of 89% and 93% for Cs⁺ and Sr²⁺ ions, respectively, in the presence of co-existing mono- and divalent cations. We suggest the high adsorption capacity of Ti₃C₂T_x/POSS-NH₂ might be due to the synergistic effects of (i) increased inter-lamellar distance between Ti₃C₂T_x galleries due to POSS-NH₂ intercalation, enabling diffusion and encapsulation of large numbers of Cs⁺/Sr²⁺ ions, (ii) strong complexation of amine (-NH₂) groups of POSS-NH₂ with Cs⁺/Sr²⁺ ions, and (iii) the presence of large numbers of heterogeneous surface functional groups (e.g., -OH, -F, and -O), which resulted in the adsorptions of Cs⁺/Sr²⁺ ions through electrostatic, ion exchange, and surface complexation mechanisms. Given the extraordinary adsorption capacities observed, intercalation appears to be a promising strategy for the effective removal of radioactive Cs⁺ and Sr²⁺ ions from aqueous media.

Amidoximated wooden solar evaporator for high-efficiency nuclear wastewater treatment

The efficient removal of uranium (VI) (UO₂²⁺) is of great significance to the ecological environment. However, there is still a lack of efficient adsorption materials to remove UO₂²⁺ in wastewater economically. Because natural basswood has high porosity, natural hydrophilicity, and abundant surface functional groups, wood as a support material has a good application prospect in water treatment. In the present work, the amidoxime functional group (AO) is grafted to the hydroxyl group of the wood fiber (AO-wood). A carbon layer is formed on the surface of the basswood by heating, and some Ag nanoparticles with good optothermal effect are added to the wood tunnel (Ag-C-AO-wood). Ag-C-AO-wood is used for efficient wastewater treatment under light conditions. The adsorption kinetic of Ag-C-AO-wood is 4.6 h under one irradiation, which is 7 times faster than AO-wood. It has approached or even surpassed some traditional carbon materials with stirring. This method is expected to break the traditional stirring method. Ag-C-AO-wood can not only remove uranium up to 82% but also have a good removal efficiency (27%) on iodide ions. More importantly, due to basswood characteristics, it is possible to large-scale preparation and explore its potential application value in wastewater.

Enhanced adsorption of aqueous Pb(II) by modified biochar produced through pyrolysis of watermelon seeds

A biochar (BC) was obtained by the pyrolysis of watermelon seeds (WM) in nitrogen environment. In addition, a modified biochar (HP-BC) was obtained by means of H₂O₂ treatment of BC. Later on, both kinds of biochar (BC and HP-BC) were characterized and compared as regards their potential for Pb(II) adsorption from wastewater. Characterization was performed by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), Zeta potential analysis, elemental mapping, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Pb(II) adsorption characteristics for HP-BC and BC as were evaluated as a function of solution pH, contact time and Pb(II) equilibrium concentration, using kinetic and thermodynamic studies, as well as adsorption isotherms. Regarding kinetics, the pseudo-second order model showed good fitting to experimental data. Based on the Langmuir model, the maximum Pb(II) adsorption capacities were calculated as 44.32 mg g^-1 and 60.87 mg g^-1 for BC and HP-BC, respectively. Thermodynamic study indicated that Pb(II) adsorption onto BC and HP-BC was spontaneous and primarily governed by chemisorption and surface complexation. In view of the results, the H₂O₂ modification of the watermelon seeds biochar can be considered as a promising and cost effective approach as regards Pb(II) removal from water/wastewater, which would not cause adverse impacts on the surrounding environments. Overall, it can be seen as a procedure promoting the effective recycling of a waste/by-product, in line of the precepts of the circular economy, aiding to protect human and environmental health.

Cobalt-Nickel Phosphate Composites for the All-Phosphate Asymmetric Supercapacitor and Oxygen Evolution Reaction

Recently, design of cost-effective multifunctional electromaterials for supercapacitors and oxygen evolution reaction (OER) and enhancing their functionalities have become an emphasis in energy storage and conversion. Herein, a series of cheap and functional phosphate composites with different ratios of cobalt and nickel are synthesized using a simple polyalcohol refluxing method, and their excellent capacity and OER properties are systematically studied. Notably, owing to the different major role of Co and Ni elements in the phosphate composites for capacity and OER, the optimal electroconductibility, structural adjustment, electrochemical active sites, and activities for capacity and OER are obtained from the composites with the different ratios of Co/Ni. In addition, using high-capacity BiPO₄ (BPO) as the negative electrodes, the new type of all-phosphate asymmetric supercapacitor (CNPO-40//BPO) shows a high energy density and reaches 36.84 W h kg^-1 at a power density of 254.52 W kg^-1. Its cyclic stability is also more excellent than that of the CNPO-40//AC device using commercial activated carbon as the negative electrodes. This study is beneficial to the more in-depth research on efficient dual-function electromaterials in capacity and OER and provides a high-efficient way to improve the practicality of asymmetric supercapacitors using the high-capacity Bi-based electromaterials as the negative electrodes.

Utilization of Citrullus lanatus L. seeds to synthesize a novel MnFe2O4-biochar adsorbent for the removal of U(VI) from wastewater: Insights and comparison between modified and raw biochar

Uranium (U) is a radioactive and highly toxic metal. Its excessive concentrations in the aqueous environments may result in severe and irreversible damage. To fight this hazard, a raw biochar was prepared from Citrullus lanatus L. seeds, then characterized and compared with a MnFe₂O₄ modified biochar, both tested for U(VI) adsorption from wastewater, which was assayed for the first time in this study. The characterization of the adsorbent materials was performed by means of scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) with elemental mapping, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) techniques. The effects of solution pH, concentration of sorbate and sorbents, temperature, time and ionic strength were assessed as regards their influence on U(VI) adsorption. The experimental adsorption data showed good fit to a pseudo-second-order kinetic model (reaching a value of q_e = 15.12 mg g^-1, R² = 0.96 at equilibrium), and to the Langmuir isotherm (achieving a maximum score of q_max = 27.61 mg g^-1, R² = 0.96). The maximum adsorption capacity was found at 318 K. The results of the study indicate that the binding of negatively charged functional groups (carbonyls, hydroxyls, and some carboxylic groups) with MnFe₂O₄ significantly enhanced U(VI) adsorption. In view of the overall results, it can be concluded that the MnFe₂O₄ modification of the Citrullus lanatus L. seeds biochar could give an efficient alternative adsorbent for U(VI) removal in a variety of environmental conditions, simultaneously promoting resource utilization and good sustainable management of the materials studied, aiding to protect the environment and human health.

Metal oxide aerogels: Preparation and application for the uranium removal from aqueous solution

The low density CeO₂, Pr₂O₃ and Nd₂O₃ aerogels were synthesized by a novel solution-freeze-drying-calcination route. The bulk densities of the CeO₂, Pr₂O₃ and Nd₂O₃ aerogels were calculated to be 8.10, 10.67 and 9.80 mg/cm³, respectively. Moreover, the structure of metal oxide aerogels was similar due to the same template materials, which made them possible to be appealing materials for adsorption. The maximum adsorption capacity for U(VI) of the CeO₂, Pr₂O₃ and Nd₂O₃ aerogels reached 481.5, 840.6 and 587.3 mg/g (pH = 7, T = 25 °C), respectively, which were much higher than most of other modified metal oxides. Moreover, at low concentration of U(VI) (5 mg/L), it was completely dislodged by CeO₂ aerogel and the remaining U(VI) was below 0.006 mg/L, which was lower than the effluent standards of United States Environmental Protection Agency and World Health Organization. Besides, after five cycles, the adsorption efficiency of metal oxide aerogels almost remained at a high level. Due to the excellent adsorption performance and high reusability, the three metal oxide aerogels would be promising adsorbents for the removal of U(VI).

Natural and anthropogenic radionuclides in water and wastewater: Sources, treatments and recoveries

Water-energy nexus in the context of changing climate amplifies the importance of comprehending the transport, fate and recovery of radioisotope. While countries have been more interested for zero/low greenhouse gas emission technologies, energy production from nuclear power plant (NPP) can be a prominent solution. Moreover, radioisotopes are also used for other benefits such as in medical science, industrial activities and many more. These radionuclides are blended accidently or intentionally with water or wastewater because of inefficacious management of the nuclear waste; and therefore, it is an imperative task to manage nuclear waste so that the harmful consequences of the waste on environment, ecology and human health can be dispelled. Due to generation of significant amount of waste throughout its utilization, a noticeable number of physical, chemical and biological processes has been introduced as remediation processes although mechanisms of optimum removal process are still under investigation. Removal mechanisms and influencing factors for radionuclide removal are elucidated in this review so that, further, operation and process development can be promoted. Again, resource recovery, opportunities and challenges are also discussed for elevating the removal rates and minimizing the knowledge gaps existing in development and applications of novel decontamination processes.

Phosphate functionalized layered double hydroxides (phos-LDH) for ultrafast and efficient U(VI) uptake from polluted solutions

Elimination of U(VI) from polluted solutions is important for human health and environmental safety. In this work, a relatively low-cost 3D flower-like phosphate-functionalized layered double hydroxides (phos-LDH) was fabricated by a one-pot hydrothermal method. The prepared phos-LDH inherited the structure of 3D flower-like layered double hydroxides (LDH), and had a higher specific surface area (∼203.4 m²⋅g^-1) than that of LDH. The kinetic process indicated that U(VI) adsorption onto phos-LDH achieved equilibrium within 15 min and obeyed general order model. The adsorption isotherms of phos-LDH illustrated that the U(VI) adsorption obeyed Langmuir model, the adsorption capability of phos-LDH can reach 923.1 mg⋅g^-1 at 298 K. The U(VI) adsorption was a spontaneous and endothermic process according to the thermodynamic data. There was the electrostatic attraction between U(VI) and phos-LDH at pH = 5.0. FTIR and XPS analyses educed that the hydroxyl and phosphate groups played a very useful role for the complexation between U(VI) and phos-LDH. In addition, the excellent selective adsorption capability for U(VI) in competitive cation and anion solutions further confirmed the practical application of phos-LDH in real wastewater treatment.

Facile modification of graphene oxide and its application for the aqueous uranyl ion sequestration: Insights on the mechanism

Graphene oxide (GO) has been proved with favorable affinity to U(VI), while some drawbacks such as poor dispersity and low adsorption performance limit its application. Herein, cetyltrimethylammonium bromide (CTAB) modified graphene oxide (MGO) composites were successfully fabricated, characterized and compared with graphene oxide (GO) in the sequestration of U(VI) in aqueous solutions. The results showed that maximum adsorption rate of MGO (99.21%) was obviously higher than that of GO (66.51%) under the same initial condition. Simultaneous introduction of C-H and NO coupled with the enhanced dispersity of GO after modification were mainly responsible for the updated performance verified with multiple characterization techniques. Based on the results of kinetics and isotherms investigations, the experimental data were best described by Pseudo-first-order kinetic model and Redlich-Peterson isotherm model. The results of ΔH, ΔS and ΔG show that adsorptive behaviors of uranyl ion on MGO are endothermic and spontaneous. The study provides a feasible alternative to the chemical modification of GO and enhancing the performance towards uranyl ion removal from solution.

Facile access to amino-substituted cyclopentafullerenes: novel reaction of [60]fullerene with β-substituted propionaldehydes and secondary amines in the absence/presence of magnesium perchlorate

A series of scarce amino-substituted cyclopentafullerenes instead of the expected N-alkyl-2,5-disubstituted fulleropyrrolidines were synthesized in moderate to excellent yields via the simple one-step reaction of [60]fullerene with cheap and easily available β-substituted propionaldehydes and secondary amines in the absence/presence of magnesium perchlorate. The in situ generation of allylic amines from β-substituted propionaldehydes and secondary amines played a crucial role in the successful preparation of amino-substituted cyclopentafullerenes without additional carbons. With the addition of magnesium perchlorate, secondary amines containing ethyl group(s) could produce novel amino-substituted cyclopentafullerenes with two additional carbons. All the obtained cyclopentafullerenes displayed high stereoselectivity with cis isomers as the exclusive or major products. Plausible reaction mechanisms are proposed to elucidate the above-mentioned reaction process.

Preparation of aluminum sludge composite gel spheres and adsorption of U(IV) from aqueous solution

A novel three-dimensional aluminum sludge/polyvinyl alcohol/sodium alginate(AS/PA/SA) gel spheres were designed and prepared for uranium(VI) adsorption, and it overcomes the shortcomings of poor recycling of powdery aluminum sludge adsorbent and poor stability of sodium alginate. Experiments show that the P-S-AS has a good pH range for removal of uranium (4-5). Fitting experimental data with pseudo-first-order kinetic model and pseudo-second-order kinetic model shows that the adsorption of U(VI) by P-S-AS is a chemical action. The fit of the Langmuir isotherm model and Freundlich isotherm model to the experimental data found that the P-S-AS adsorbed U(VI) to a single layer. Thermodynamic analysis shows that the adsorption occurs spontaneously, and an increase in temperature is favorable for the adsorption of uranium by the P-S-AS. Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis of the P-S-AS before and after adsorption showed that the main adsorption mechanism was the complexation reaction between functional groups and U(VI), the bonding reaction between metal oxides and U(VI).

Magnetic C60 nanospheres based solid-phase extraction coupled with isotope dilution gas chromatography-mass spectrometry method for the determination of sixteen polycyclic aromatic hydrocarbons in Chinese herbal medicines

C₆₀-based magnetic nanospheres were synthesized by coating Fe₃O₄ nanospheres with silica, then modifying with 3-aminopropyltriethoxysilane as a linker and a C₆₀ fullerene stationary phase. The morphologies, magnetic properties, infrared absorption and carbon content of magnetic nanospheres were studied by TEM, VSM, FTIR and carbon and sulfur analyzer. The magnetic nanospheres were employed for the magnetic solid-phase extraction (MSPE) of 16 polycyclic aromatic hydrocarbons (PAHs) in nine Chinese herbal medicines. The analyses were conducted by isotope dilution gas chromatography-mass spectrometry. The main parameters influencing the extraction, including extraction solvent, adsorbent amount, and extraction time were optimized. Method validation showed that the limit of detection (LOD) was 0.02-0.11 µg/kg, and the limit of quantification (LOQ) was 0.07-0.36 µg/kg. The spiked recoveries rates for 16 PAHs in white peony root were 84.7-107.2%. The relative standard deviation (RSD) was 1.7-8.4%. The established method was further used for the determination 16 PAHs in nine Chinese herbal medicines. Total content of 16 PAHs varied from 73.6 µg/kg (fructus lycii) to 2172.6 µg/kg (astragalus root). The results indicate that the pollution of PAHs in Chinese herbal medicines is serious. The established method can effective detect PAHs contamination in Chinese herbal medicines.

Templated synthesis of nickel nanoparticles embedded in a carbon layer within silica capsules

The encapsulation of small non-noble metal nanoparticles (NPs) within an inorganic layer has received considerable attention owing to their enhanced stability and high catalytic activity. Using a combination of emulsion-free polymerization, inner RF-Ni2+ and outer SiO2 coating, and subsequent carbonization treatment, herein, we have fabricated worm-like structured Ni-based composites in which a high density of nickel NPs are embedded in a carbon layer and also entrapped by SiO2 nanocages. We find that the carbonization temperature plays a vital role in adjusting the size of the Ni NPs. A detailed examination of the encapsulated nickel particles synthesized at 700 °C exhibited the best performance on the catalysis of the reduction of 4-NPs. Moreover, owing to the good alloying ability of the Ni NPs with noble metal NPs, the Ni-Pd alloy NPs are also entrapped in the SiO2 nanocages, which exhibit better performance on the catalysis than the Ni-based composites. The encapsulation of Ni-Pd alloys within SiO2 nanocages also improves stability against agglomeration and metal separation during catalytic operation.

Influence of Leifsonia sp. on U(VI) removal efficiency and the Fe-U precipitates by zero-valent iron

Zero-valent iron (ZVI) has been widely applied to the remediation of uranium (U)-contaminated water. Notably, indigenous bacteria may possess potential positive or unfavorable influence on the mechanism and stability of Fe-U precipitates. However, the focus of the researches in this field has mainly been on physical and/or chemical aspects. In this study, batch experiments were conducted to explore the effects of an indigenous bacterium (Leifsonia sp.) on Fe-U precipitates and the corresponding removal efficiency by ZVI under different environmental factors. The results showed that the removal rate and capacity of U(VI) was significantly inhibited and decreased by ZVI when the pH increased to near-neutral level (pH = 6~8). However, in the ZVI + Leifsonia sp. coexistence system, the U(VI) removal efficiency were maintained at high levels (over 90%) within the experimental scope (pH = 3~8). This revealed that Leifsonia sp. had a synergistic effect on U(VI) remove by ZVI. According to scanning electron microscope and energy dispersive X-ray detector (SEM-EDX) analysis, dense scaly uranium-phosphate precipitation was observed on ZVI + Leifsonia sp. surface. The X-photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis indicated that Leifsonia sp. facilitated the generation of U(VI)-phosphates precipitates. The X-ray diffraction (XRD) analyses further revealed that new substances, such as (Fe(II)Fe(III)₂(PO₄)₂(OH)₂), Fe(II)(UO₂)₂(PO₄)₂·8H₂O, Fe(II)Fe(III)₅(PO₄)₄(OH)₂·4H₂O, etc., were produced in the coexisting system of ZVI and Leifsonia sp. This study provides new insights on the feasibility and validity of site application of ZVI to U(VI)-contaminated subsurface water in situ. Graphical abstract.

A novel sorbent based on Ti-Ca-Mg phosphates: synthesis, characterization, and sorption properties

This work focuses on the synthesis procedure of a new sorbent based on a TiCaMg phosphate. The synthesis strategy includes stepwise interaction between solid precursors and phosphorus-containing agents. The solid precursors were ammonium titanyl sulfate and calcined dolomite, which were used as titanium, calcium, and magnesium sources. The effect of the nature and concentration of phosphoric agent on the sorbent composition and properties has been investigated using elemental analysis, TG, XRD, IR spectroscopy, BET, and SEM techniques. The novel sorbent has been demonstrated to be a composite material consisting of the following components: TiO(OH)H₂PO₄·H₂O, Ti(HPO₄)₂·H₂O, CaHPO₄·2H₂O, MgНPO₄·3H₂O, and NH₄MgPO₄·6H₂O. The ratio between these phases in the composite depends on synthesis conditions. The optimal conditions, ensuring full conversion of Ti, Ca, and Mg containing in the initial precursors into the final product, have been found. The sorption properties of the obtained composite sorbent towards Co²⁺, Cs⁺, and Sr²⁺ cations and their radionuclide analogues have been studied. The obtained data has indicated that the purification effect was based on both precipitation and ion exchange mechanism. The combined action of the individual components of the composite sorbent ensures its high sorption capacity towards different cations in a wide pH range. The new sorbent shows high sorption ability towards radionuclides in multicomponent liquid radioactive waste (LRW) systems, and the distribution coefficient of the studied radionuclides was found to be 10⁵ mL g^-1. The presence of different types of functional groups in the composite sorbent allows realizing the one-step purification process of LRW that, in turn, simplifies the sorption system design.

Mechanisms of U(VI) removal by biochar derived from Ficus microcarpa aerial root: A comparison between raw and modified biochar

Uranium (U) is a toxic and radioactive element. Excessive amounts of aqueous U(VI) generated from U mining, processing and nuclear industry may result in severe and irreversible damage to the environment. Herein, Ficus microcarpa aerial root (FMAR), a biowaste material, was used to adsorb U(VI) from aqueous solutions for the first time. Potassium permanganate (KMnO₄)-modified FMAR biochar was synthesised, characterised and compared with raw (unmodified) biochar with respect to U(VI) adsorption. The results showed that the adsorption capability of the modified FMAR biochar was evidently higher than that of the raw biochar. Multiple characterisation techniques confirmed that the discrepancy was mainly due to the increased content of O-H and formation of irregular sheet-like nanostructure with the ultrafine MnO₂ nanoparticles on the biochar surfaces after KMnO₄ modification. The abundance of O-H and nanoscale MnO₂ notably enhanced the adsorption of U(VI) by means of coordination and Lewis acid-base interaction. The results indicate that KMnO₄-modified FMAR biochar has a good potential to serve as an environment-friendly adsorbent for the removal of U(VI) from solution.