Development of Two novel silica based symmetric triazine-ring opening N-donor ligands functional adsorbents for highly efficient separation of palladium from HNO3 solution

Closed-loop process for selective leaching and recovery of palladium from spent auto-exhaust catalysts using iodotrihalide ionic liquids

The recovery of palladium from spent auto-exhaust catalysts (SAE-catalysts) is of great significance for resource sustainability. Herein, we proposed an efficient closed-loop leaching and recovery method for palladium from SAE-catalysts using iodotrihalide ionic liquids (ILs). Recovery design was explored aimed at green leaching and process simplification. Iodotrihalide ILs exhibited exceptional performance in terms of leaching efficiency (99.1%), selectivity (selectivity > 6.8 ×103) and reusability (over 6 cycles). The mechanism study revealed that excellent leaching performance was attributed to the redox and complexation. Additionally, the chemical reaction-controlled model was best suited to describe the leaching process. Notably, under the optimal conditions determined by the response surface methodology, a high-purity Pd(II) solution (purity > 99.8%) was obtained. More significantly, it was ideal for practical applications due to the low-viscosity (36.0 cP), mild (55 °C) and one-step leaching and recovery. In conclusion, this work provides an eco-friendly method for recovering palladium from SAE-catalysts with its non-high corrosiveness and low environmental impact.

Phosphination of amino-modified mesoporous silica for the selective separation of strontium

Radioactive strontium (90Sr) is considered as one of the most dangerous radionuclides due to its high biochemical toxicity. For the efficient and selective separation of Sr from acidic environments, a novel functional adsorbent CEPA@SBA-15-APTES was prepared in this work through the phosphorylation of amino-modified mesoporous silica with organic content of approximately 20 wt%. CEPA@SBA-15-APTES was characterized by TEM, SEM, EDS, TG-DSC, BET, FTIR, and XPS techniques, revealing its characteristics of an ordered hexagonal lattice-like structure and rich functional groups. The experimental results demonstrated that the adsorbent exhibited good adsorption capacity for Sr over a wide acidity range (i.e., from 10-10 M to 4 M HNO3). The adsorption equilibriums of Sr by CEPA@SBA-15-APTES in 10-6 M and 3 M HNO3 solutions were reached within 30 and 5 min, respectively, and the adsorption capacities at 318 K were 112.6 and 71.8 mg/g, respectively. Furthermore, by combining the experimental and characterization results, we found that the adsorption mechanism consisted of ion exchange between Sr(II) and H+ (in P-OH) in the 10-6 M HNO3 solution and coordination between the Sr(II) and oxygen-containing (CO and P = O) functional groups in the 3 M HNO3 solution.

Precise recognition and efficient recovery of Pd(II) from high-level liquid waste by a novel aminothiazole-functionalized silica-based adsorbent

Efficient recognition, separation and recovery of palladium from high-level liquid waste (HLLW) not only helps the safe, green and environmentally friendly disposal of nuclear waste, but also is an essential important supplement to overcome the growing shortage of natural palladium resources. Herein, a novel silica-based functional adsorbent named 2AT-SiAaC was prepared by a two-step method, i.e., grafting of 2-aminothiazole (2AT) via the amidated reaction after in-situ polymerization of acrylic monomers on porous silica. SEM, EDS, TG-DSC, BET and PXRD all proved the successful preparation of 2AT-SiAaC, and it exhibited ultrahigh adsorption selectivity for Pd(II) (Kd (distribution coefficient) ≥ 10,344.2 mL/g, SFPd/M (separation factor) ≥ 613.7), fast adsorption kinetics with short equilibrium time (t ≤ 1 h) and good adsorption capacity (Q ≥ 62.1 mg Pd/g). The dynamic column experiments shows that 2AT-SiAaC achieved efficiently separation of Pd(II) from simulated HLLW, and the enrichment coefficients (C/C0) of Pd(II) was as high as about 14 with the recovery rate nearly 99.9% and basically kept the same performance in three adsorption-desorption column cycle experiments. The adsorption mechanism was analyzed by FT-IR, XPS and DFT calculations, and the ultrahigh selectivity of 2AT-SiAaC was attributed to the preferred affinity of the soft N-donor atoms in 2AT for Pd(II). NO3- ions participated in the adsorption reaction to keep charge balance, and the frontier orbital electron density distribution diagram shows the charge transfer in the process of material preparation and adsorption. To sum up, 2AT-SiAaC adsorbent provided a new insight for precise recognition and efficient separation of Pd(II) from HLLW.

Precise stepwise recovery of platinum group metals from high-level liquid wastes based on SDB polymer-modified SiO2

Accurate separation and efficient recovery of platinum group metals (PGMs, mainly Ru, Rh and Pd) from high level liquid waste (HLLW) is a good choice for clean production and sustainable development of nuclear energy. Herein a novel SDB polymer modified silica-based amine-functionalized composite (dNbpy/SiO2-P) was synthesized for the separation and recovery of PGMs. Laser particle size analysis and BET results clarified the regular spherical and highly interconnected mesoporous structure of dNbpy/SiO2-P which is critical for the separation of PGMs. The removal percent of PGMs were over 99% on the optimized conditions. In addition, dNbpy/SiO2-P showed excellent selectivity (SFPd/M > 3805, SFRu/M > 1705, SFRh/M > 336) and repeatability (≥5). Interestingly, based on the different adsorption and desorption kinetics of PGMs, a double-column strategy is designed to solve the challenge of separating and recovering PGMs from HLLW. The enrichment factors of Pd(II), Ru(III) and Rh(III) reached 36.7, 8.2, and 1.2. The adsorption of PGMs was coordination mechanism and required the involvement of NO3- to maintain charge balance. The specific distribution of elements within the adsorbents and the changes in valence state were analyzed using depth-profiling XPS. Both depth-profiling XPS results and slope analysis revealed that the complex of dNbpy and PGMs is a 1 : 1 coordination structure. Overall, this work fills the gap that PGMs cannot be effectively separated and enriched from HLLW.

Adsorption of Pd(II) ions by electrospun fibers with effective adsorption sites constructed by N, O atoms with a particular spatial configuration: Mechanism and practical applications

The separation and recovery of palladium from electronic waste (e-waste) are of great significance as they can alleviate environmental pollution and avoid resource loss. Herein, a novel nanofiber modified by 8-hydroxyquinoline (8-HQ-Nanofiber) with adsorption sites co-constructed by N and O atoms of hard bases was fabricated, which has good affinity properties for the Pd(II) ions belonging to soft acid in the leachate of e-waste. The adsorption mechanism of 8-HQ-Nanofiber for Pd(II) ions was revealed from the perspective of molecular level relied on a series of characterizations, such as FT-IR, ss-NMR, Zeta potential, XPS, BET, SEM and DFT. The adsorption of Pd(II) ions on 8-HQ-Nanofiber reached equilibrium within 30 min and the maximum uptake capacity was 281 mg/g at 318.15 K. The adsorption behavior of Pd(II) ions by 8-HQ-Nanofiber was described by the pseudo-second-order and Langmuir isotherm models. The 8-HQ-Nanofiber exhibited relatively good adsorption performance after 15 times of column adsorption. Finally, based on hard and soft acids and bases (HSAB) theory, a strategy to regulate the Lewis alkalinity of adsorption sites by specific spatial structures is proposed, which provides a new direction for the design of adsorption sites.

Radiation Resistance and Adsorption Behavior of Aluminum Hexacyanoferrate for Pd

Irradiation resistance is important for adsorbents used in radioactive environments such as high-level liquid waste. In this work, a silica-based composite adsorbent (KAlFe(CN)₆/SiO₂) was synthesized and γ-irradiated from 10 to 1000 kGy. The angles of the main X-ray diffraction peaks slightly decreased with the increase in irradiation dose, and a minor decomposition of CN^- occurred after irradiation to 1000 kGy, indicating that the KAlFe(CN)₆/SiO₂ adsorbent could preserve structural integrity with a dose below 100 kGy. In 1 to 7 M HNO₃, the adsorption ability of the irradiated KAlFe(CN)₆/SiO₂ remained performant, with a higher K_d than 1625 cm³ g^-1. The adsorption equilibrium of Pd(II) in 3 M HNO₃ was attained within 45 min before and after irradiation. The maximal adsorption capacity Q_e of the irradiated KAlFe(CN)₆/SiO₂ on Pd(II) ranged from 45.1 to 48.1 mg g^-1. A 1.2% relative drop in Q_e was observed after 100 kGy irradiation, showing that γ-irradiation lower than 100 kGy insignificantly affected the adsorption capacity of KAlFe(CN)₆/SiO₂. Calculating and comparing the structures and free energies of different adsorption products via the density functional theory (DFT) method showed that KAlFe(CN)₆/SiO₂ was more inclined to completely adsorb Pd(II) and spontaneously generate Pd[AlFe(CN)₆]₂.

Simultaneously efficient adsorption and highly selective separation of U(VI) and Th(IV) by surface-functionalized lignin nanoparticles: A novel pH-dependent process

The simultaneous removal and selective separation of U(VI) and Th(IV) via adsorption remain challenging due to their strong mobility, reactivity, and similar chemical properties. Thus, a surface-functioned lignin nanoparticle (AL-PEI) was synthesized to adsorb U(VI)/Th(IV) in a unitary system via a pH-dependent process. In alkaline solution, AL-PEI exhibited excellent adsorption performance, and the maximum adsorption capacities for U(VI) and Th(IV) reached 392 and 396 mg/g, respectively. Discrepantly in acidic solution, the adsorption performance of AL-PEI for U(VI) could still reach a high capacity (332 mg/g), whereas highly limited adsorption capacity (less than 40 mg/g) for Th(IV) was obtained, and the separation factor of U(VI) from U(VI)-Th(IV) matrix significantly reached 6662 in 3 M of the HNO₃ medium. The simultaneously efficient adsorption in alkaline solution and highly selective separation performance in acidic solution of AL-PEI also showed excellent anti-ions interference capacities, high reusability, and strong stability. This study is the first to apply lignin fabricating radiation-resistant adsorbent material, and the adsorbent displays good performance for U(VI)/Th(IV) removal and selective separation via a novel pH-dependent process, which is important to the green and sustainable development of nuclear energy and environmental protection.

Extraction and Complexation Investigation of Palladium(II) by a Nitrilotriacetate-Derived Triamide Ligand

Effective and selective separation and recovery of the fission product palladium from high-level liquid waste are conducive not only to reducing its hazards to the public health and environment but also to alleviate the pressure on the increasing demand for natural palladium. Herein, the Pd²⁺ extraction in an HNO₃ solution with a nitrilotriacetate-derived triamide ligand NTAamide(n-Oct) and the complexation between them were investigated. Using n-octanol as a diluent, NTAamide(n-Oct) demonstrated an excellent selectivity, strong extractability, and high loading capacity for Pd²⁺ extraction. Combined with the results of single-crystal X-ray diffraction, Fourier transform infrared spectroscopy, electrospray ionization-mass spectroscopy, microcalorimetric titration, and slope analysis, the extracted complexes were determined as [PdL₂](NO₃)₂ and [PdL₂][Pd(NO₃)₄] (where L denotes the NTAamide ligand) in 0.10 and 3.0 mol/L HNO₃ solutions, respectively. The extraction model closely depended on the solvation state of Pd²⁺ in the HNO₃ solution. An ion-pair extraction model was proposed and discussed.

Selective capture of Pd(II) from aqueous media by ion-imprinted dendritic mesoporous silica nanoparticles and re-utilization of the spent adsorbent for Suzuki reaction in water

The development of highly efficient adsorptive material for the selective capture of Pd(II), and re-utilization of spent Pd(II)-loaded adsorbent as an efficient catalyst for organic synthesis are of great significance, but challenging. Particularly, the heterogeneous palladium-catalyzed Suzuki reaction in aqueous media is much more challenging than that of homogeneous. Herein, several novel Pd(II) ion-imprinted polymers (PIIPs) based on dendritic fibrous silica particles are constructed by surface ion imprinting technology (SIIT), using Schiff base and pyridine groups functionalized organosilicon as functional monomer. The PIIP-3 prepared by 3 g of functional monomer exhibits the best adsorption performance, and shows ultrafast (10 min) and selective capture of Pd(II) with high uptake capacity (382.5 mg/g). Moreover, the waste Pd(II) loaded PIIP-3 (PIIP-3-Pd) can serve as a catalyst towards the Suzuki reaction in water, affording 94.2 % yield of the desired product. Interestingly, the PIIP-3-Pd can be reused 12 times without an appreciable decrease in catalytic activity, which is probably due to the imprinted cavity and specific recognition site of PIIP-3 can match and recapture Pd active species in a complex catalytic environment. Thus, this work demonstrates huge potentials of SIIT to enhance the selectivity of adsorption process and increase the lifetime of catalysts.

Selective Capture Mechanism of Radioactive Thorium from Highly Acidic Solution by a Layered Metal Sulfide

Thorium as a potential nuclear fuel for the next-generation thorium-based molten salt reactors holds significant environmental and economic promise over the current uranium-based nuclear reactors. However, because thorium (Th⁴⁺) usually coexists with other rare earth elements, alkali or alkaline earth metals in minerals, or highly acidic radioactive waste, seeking acid-resistant sorbents with excellent selectivity, high capacity, and fast removal rate for Th⁴⁺ is still a challenging task. In this work, we investigated a robust layered metal sulfide (KInSn₂S₆, KMS-5) for Th⁴⁺ removal from strong acidic solutions. We report that KMS-5 could capture Th⁴⁺ from a 0.1 M HNO₃ solution with extremely high efficiency (∼99.9%), fast sorption kinetics (equilibrium time < 10 min), and large distribution coefficient (up to 1.5 × 10⁶ mL/g). Furthermore, KMS-5 exhibited excellent sorption selectivity towards Th⁴⁺ in the presence of large amounts of competitive metal ions like Eu³⁺, Na⁺, and Ca²⁺. This extraordinary capture property for Th⁴⁺ is attributed to the facile ion exchange of Th⁴⁺ with K⁺ in the interlayers and subsequent formation of a stable coordination complex via Th-S bonds. These results indicate that KMS-5 is a promising functional sorbent for the effective capture of Th⁴⁺ from highly acidic solutions.

Synergistic adsorption behavior of a silica-based adsorbent toward palladium, molybdenum, and zirconium from simulated high-level liquid waste

In this study, the synergistic adsorption behavior of palladium [Pd(II)], molybdenum [Mo(VI)], and zirconium [Zr(IV)] in simulated high-level liquid waste was systematically investigated based on various factors, such as the contact time, concentration of nitric acid, adsorption amount, and temperature using a silica-based adsorbent impregnated with N,N'-dimethyl-N,N'-di-n-hexyl-thiodiglycolamide (Crea) and 2, 2', 2' -nitrilotris[N,N-bis(2-ethylhexyl)acetamide] (TAMIA-EH). The adsorption rates of Pd(II), Mo(VI), and Zr(IV) in this synergistic adsorption system were high; thus, equilibrium states could be obtained in only 1 h with high uptake percentages of more than 90%. The adsorption abilities of Pd(II), Mo(VI), and Zr(IV) were only slightly affected by variation in the concentration of nitric acid in the range of 0.1-5 M and solution temperature in the range of 288-313 K. Selective stripping of the adsorbed Re(VII), Pd(II), Zr(IV), and Mo(VI) was successfully achieved under elution with 5 M HNO₃, 0.2 M Tu (pH 1), 50 mM DTPA (pH 2), and 50 mM DTPA dissolved in 0.5 M Na₂CO₃ (pH 11) solutions using the chromatography method. In addition, the adsorption performance in solid-state was studied using the particle-induced X-ray emission (PIXE) method; the obtained results were in good agreement with the results obtained via column separation.

Adsorption and separation behavior of palladium(II) from simulated high-level liquid waste using a novel silica-based adsorbents

Aiming at selective adsorption and separation of Pd(II) in nitric acid solution, a hybrid soft N and hard O donor adsorbent (TAMIA-EH+TOA)/SiO2–P (P = Polymer) was successfully synthesized. The adsorption performances of (TAMIA-EH+TOA)/SiO2–P adsorbent towards Pd(II) were systematically investigated as a function of contact time, effect of concentration of nitric acid, effect of temperature etc. Adsorption speed of Pd(II) was fairly fast and can reach equilibrium state within only 0.5 h. The distribution coefficient of Pd(II) was more than 103 when [HNO3] = 0.1. Though it decreased gradually with an increase in the concentration of HNO3, the adsorption selectivity of (TAMIA-EH+TOA)/SiO2–P adsorbent towards Pd(II) was still significant than other co-existing metal ions in the whole HNO3 range from 0.1 to 5 M. The adsorption isotherm of Pd(II) onto (TAMIA-EH+TOA)/SiO2–P adsorbent fitted well with Langmuir adsorption model but Freundlich isotherm model. The calculated results of adsorption thermodynamic parameters indicated that the adsorption process of Pd(II) was exothermic and happened in a natural way. Furthermore, the separation chromatography experiment by utilizing (TAMIA-EH+TOA)/SiO2–P adsorbent packed column was carried out. Based on the results of plotted elution curves, it was found that the successful recovery of Pd(II) (96.27%) was achieved by eluting with thiourea solution.