Ion exchange collaborating coordination substitution: More efficient Cr(VI) removal performance of a water-stable CuII-MOF material

Carboxymethyl-imidazolium O-vanillin Schiff base grafted into NH2-tagged MIL-101 (Cr) for effective removal of cupric ions from aqueous effluents

A novel adsorbent (MIL-CMIVSB) was fabricated by modification of H2N-MIL-101(Cr) with carboxymethyl-imidazolium O-vanillin Schiff base. The MIL-CMIVSB's physicochemical characteristics were examined using the pertinent characterization methods. NH2-MIL-101(Cr) has a BET surface area of 1492.4 m2g-1, while MIL-CMIVSB adsorbent had 1278.7 m2g-1. Batch adsorption experiments examined the MIL-CMIVSB's cupric ion adsorption capacity from aqueous solutions at different adsorbent doses (0.1-3 mg), pH (2.0-10.0), contact times (0-240 min), metal ion initial concentrations (10-300 mg/L), and temperatures (298-308 K). The optimum conditions were 1 mg/mL of MIL-CMIVSB adsorbent, 46 min adsorption time, pH 7, 100 ppm initial cupric ion concentration, and 303 K temperature. MIL-CMIVSB effectively and selectively removes cupric ions with an adsorption capability of 359.05 ± 12.06 mg/g. The nonlinear Liu isotherm governed Cu(II) sorption performance on MIL-CMIVSB (KL = 0.257 ± 0.01 mg/g, R2 = 0.99892) and pseudo-2nd-order kinetically (k2 = 0.00116 × 10-4 g/mg min, R2 = 0.99721).

Silver 2,4'-Bipyridine Coordination Polymer for the High-Capacity Trapping of Perrhenate, A Pertechnetate Surrogate

Pertechnetate, the most stable form of the radionuclide 99Tc in aerobic aqueous systems, is a hazardous anion present in nuclear waste. Its high mobility in water makes the remediation of the anion challenging. In the past decade, significant effort has been placed into finding materials capable of adsorbing this species. Here, we present the synthesis and high-resolution crystal structure of the coordination polymer [Ag(2,4'-bipyridine)]NO3, which is capable of sequestering perrhenate─a pertechnetate surrogate─through anion exchange to form another new coordination polymer, [Ag(2,4'-bipyridine)]ReO4. Both the beginning and end structures were solved by single-crystal X-ray diffraction and the adsorption reaction was monitored through inductively coupled plasma-optical emission spectroscopy and UV-vis spectroscopy. The exchange reaction follows a pseudo-second-order mechanism and the maximum adsorption capacity is 764 mg ReO4/g [Ag(2,4'-bipyridine)]NO3, one of the highest recorded for a coordination polymer or metal-organic framework. A solvent-mediated recrystallization mechanism was determined by monitoring the ion-exchange reaction by scanning electron microscopy-energy-dispersive spectroscopy and powder X-ray diffraction.

Enhanced photoreduction efficiency of Cr(VI) driven by visible light in a new Zr-based metal-organic framework modified by hydroxyl groups

While metal-organic framework (MOF) photocatalysts have demonstrated a unique Cr(VI) photoreduction capability in recent decades, their performance is still insufficient for practical applications because of their low Cr(VI) uptake and poor visible light response. To cope with these drawbacks, a new OH-modified Zr-based MOF, termed HCMUE-1, was successfully prepared via a solvothermal method in this work. The complete characterization of HCMUE-1 was performed through various techniques, including powder X-ray diffraction (PXRD), Raman spectroscopy, Fourier transform infrared (FT-IR), thermogravimetric analysis and differential scanning calorimetry (TGA-DSC), scanning electron microscopy combined with energy-dispersive X-ray (SEM-EDX), and X-ray photoelectron spectroscopy (XPS). The obtained data exhibited the excellent Cr(VI) photoreduction efficiency of HCMUE-1, reaching up to 98% after 90 min and almost 100% after 120 min under visible light illumination in a low acidic medium. Noteworthily, HCMUE-1 retained the same Cr(VI) removal rate for at least seven cycles without considerable loss. Further experimental investigations demonstrated that the structural stability and surface morphology of HCMUE-1 were retained after photoreduction. Moreover, the photocatalytic reduction mechanism of Cr(VI) to Cr(III) was interpreted through a series of systematic experimental measurements. These results indicate that HCMUE-1 possesses potential as an efficient photocatalyst for reducing toxic Cr(VI) species from wastewater in real-life conditions.

Selective removal of Cr2O72- in aqueous solution by nonporous pure crystals of cucurbit[6]uril

Cucurbit[6]uril (Q[6]) could serve as a selective absorbent for the toxic anion Cr2O72-, which was demonstrated by the results of UV-vis, ICP, XPS, SEM, and EDS experiments. Single-crystal X-ray diffraction analysis revealed that capture capacity could be attributed to the outer-surface interactions of cucurbit[n]uril between Cr2O72- and the outer surface of Q[6].

Engineering extracellular electron transfer to promote simultaneous brewing wastewater treatment and chromium reduction

Microbial fuel cell (MFC) technology has been developed for wastewater treatment in the anodic chamber, and heavy metal reduction in the cathodic chamber. However, the limited extracellular electron transfer (EET) rate of exoelectrogens remained a constraint for practical applications of MFCs. Here, a MFC system that used the electricity derived from anodic wastewater treatment to drive cathodic Cr6+ reduction was developed, which enabled an energy self-sustained approach to efficiently address Cr6+ contamination. This MFC system was achieved by screening exoelectrogens with a superior EET rate, promoting the exoelectrogenic EET rate, and constructing a conductive bio-anode. Firstly, Shewanella algae-L3 was screened from brewing wastewater acclimatized sludge, which generated power density of 566.83 mW m-2. Secondly, to facilitate EET rate, flavin synthesis gene operon ribADEHC was overexpressed in engineered S. algae-L3F to increase flavins biosynthesis, which promoted the power density to 1233.21 mW m-2. Thirdly, to facilitate interface electron transfer, carbon nanotube (CNT) was employed to construct a S. algae-L3F-CNT bio-anode, which further enhanced power density to 3112.98 mW m-2. Lastly, S. algae-L3F-CNT bio-anode was used to harvest electrical energy from brewing wastewater to drive cathodic Cr6+ reduction in MFC, realizing 71.43% anodic COD removal and 98.14% cathodic Cr6+ reduction. This study demonstrated that enhanced exoelectrogenic EET could facilitate cathodic Cr6+ reduction in MFC.

Orientation Growth of N-Doped and Iron-Based Metal-Organic Framework and Its Application for Removal of Cr(VI) in Wastewater

A series of NH2-functionalized nano-sized magnetic metal-organic frameworks (MOFs) were prepared in this study for Cr(VI) removal from wastewater. It was observed that not only the morphological, i.e., orientation growth of N-doped and iron-based metal-organic frameworks, but also the adsorption of magnetic MOFs is largely related to the used amount of ammonium hydroxide in preparation. For example, with increasing amounts of ammonium hydroxide used in preparation, the morphology of magnetic MOFs changed from spherical to cube and triangular cone. Moreover, the maximum adsorption capacity of spherical-magnetic MOFs, cubic-magnetic MOFs and triangular cone-magnetic MOFs could be up to 204.08 mg/g, 232.56 mg/g and 270.27 mg/g, respectively. Under optimal conditions, the adsorption process of magnetic MOFs for Cr(VI) was consistent with the pseudo-second-order rate equation (R2 = 1) and Langmuir isotherm model (R2 > 0.99). Therefore, magnetic MOFs developed in this work offered a viable option for the removal of Cr(VI) from wastewater.

Transformation of SBUs and Synergy of MOF Host-Guest in Single Crystalline State: Ingenious Strategies for Modulating Third-Order NLO Signals

Central metal exchange can innovatively open the cavity of metal-organic frameworks (MOFs) by alternating the framework topology. Here, the single-crystal-to-single-crystal (SC-SC) transformation is reported from a Co-based MOF {[Co1.25 (HL)0.5 (Pz-NH2 )0.25 (µ3 -O)0.25 (µ2 -OH)0.25 (H2 O)]·0.125 Co·0.125 L·10.25H2 O}n (Co-MOF, L = 5,5'-(1H-2,3,5-triazole-1,4-diyl)diisophthalic acid) into two novel MOF materials, {[Cu1.75 L0.75 (Pz-NH2 )0.125 (µ3 -O)0.125 (µ2 -OH)0.25 (H2 O)0.375 ]•3CH3 CN}n (Cu-MOF) and {[Zn1.75 L0.625 (Pz-NH2 )0.25 (µ3 -O)0.25 (µ2 -O)0.25 (H2 O)1.25 ]•4CH3 CN}n (Zn-MOF), through exchanging the Co2+ in the MOF into Cu2+ or Zn2+ , respectively. The free Co2+ and L4- in the Co-MOF channels fuse with the skeleton during the Co→Cu and Co→Zn exchange processes, leading to the expansion of the channel space and the transformation of the secondary building units (SBUs) to form an adjustable skeleton. The nonlinear optical response results show that the MOFs generated by the exchange of the central metal exhibit different saturable absorption and the self-focusing effect. In addition, loading polypyrrole (PPy) into the MOFs can not only improve the stability of the MOFs but also further optimize the nonlinear optical behavior. This work suggests that SC-SC central metal exchange and the introduction of polymer molecules can tune the nonlinear optical response, which provides a new perspective for the future study of nonlinear optical materials.

A review of the treatment technologies for hexavalent chromium contaminated water

The toxicity of hexavalent chromium (Cr(VI)) present in the environment has exceeded the current limits or standards and thus may lead to biotic and abiotic catastrophes. Accordingly, several treatments, including chemical, biological, and physical approaches, are being used to reduce Cr(VI) waste in the surrounding environment. This study compares the Cr(VI) treatment approaches from several areas of science and their competence in Cr(VI) removal. As an effective combination of physical and chemical approaches, the coagulation-flocculation technique removes more than 98% of Cr(VI) in less than 30 min. Most membrane filtering approaches can remove up to 90% of Cr(VI). Biological approaches that involve the use of plants, fungi, and bacteria also successfully eliminate Cr(VI) but are difficult to scale up. Each of these approaches has its benefits and drawbacks, and their applicability is determined by the research aims. These approaches are also sustainable and environmentally benign, thus limiting their effects on the ecosystem.

Guest-Induced Multilevel Charge Transport Strategy for Developing Metal-Organic Frameworks to Boost Photocatalytic CO2 Reduction

Encapsulating photogenerated charge-hopping nodes and space transport bridges within metal-organic frameworks (MOFs) is a promising method of boosting the photocatalytic performance. Herein, this work embeds electron transfer media (9,10-bis(4-pyridyl)anthracene (BPAN)) in MOF cavities to build multi-level electron transfer paths. The MOF cavities are accurately regulated to investigate the significance of the multi-level electron transfer paths in the process of CO2 photoreduction by evaluating the difference in the number of guest media. The prepared MOFs, {[Co(BPAN)(1,4-dicarboxybenzene)(H2 O)2 ]·BPAN·2H2 O} and {[Co(BPAN)2 (4,4'-biphenyldicarboxylic acid)2 (H2 O)2 ]·2BPAN·2H2 O} (denoted as BPAN-Co-1 and BPAN-Co-2), exhibit efficient visible-light-driven CO2 conversion properties. The CO photoreduction efficacy of BPAN-Co-2 (5598 µmol g-1  h-1 ) is superior to that of most reported MOF-based catalysts. In addition, the enhanced CO2 photoreduction ability is supported by density functional theory (DFT). This work illustrates the feasibility of realizing charge separation characteristics in MOF catalysts at the molecular level, and provides new insight for designing high-performance MOFs for artificial photosynthesis.

Development of novel MOF-mixed matrix three-dimensional membrane capsules for eradicating potentially toxic metals from water and real electroplating wastewater

The stability and applicability of UiO-66-(NH₂)₂ metal-organic framework (MOF) nanoparticles (NPs) were successfully improved in this study by incorporating them into alginate biopolymer during the manifestation of crosslinking agents-calcium chloride and glutaraldehyde-via a simple, environment-friendly, and facile approach to eradicate potentially toxic metals (PTMs) such as Cr⁶⁺, Cr³⁺, Cu²⁺, and Cd²⁺ from water and real electroplating wastewater. Hydrophilic functional groups (i.e., -OH, -COOH, and -NH₂) are imperative in the smooth loading of UiO-66-(NH₂)₂ MOF- NPs into three-dimensional (3-D) membrane capsules (MCs). The X-ray photoelectron spectroscopy (XPS) results suggested that UiO-66-(NH₂)₂ MOF was effectively bonded in/on the capsule via electrostatic crosslinking between -H₃N⁺ and -COO^-. Scanning electron microscopy results revealed a porous honeycomb configuration of the 3-D SGMMCs (S: sodium alginate, G: glutaraldehyde, M: MOF NPs, and MCs: membrane capsules). The maximum monolayer absorption capacities for Cr⁶⁺, Cr³⁺, Cu²⁺, and Cd²⁺ were 495, 975, 1295, and 1350 mg/g, respectively. The results of Fourier transform infrared spectroscopy and XPS analyses showed that electrostatic attraction and ion exchange were the main processes for PTM removal used by the as-developed 3-D SGMMCs. The as-developed 3-D SGMMCs exhibited outstanding selectivity for removing the targeted PTMs under the specified pH/conditions and maintained >80% removal efficiency for up to six consecutive treatment cycles. Notably, > 60% removal efficiencies for Cr⁶⁺ and Cu²⁺ were observed when treating real electroplating wastewater. Therefore, the as-developed 3-D SGMMCs can be used as an exceptional multifunctional sorbent to remove and recover PTMs from real electroplating wastewater.

Determination of anionic perfluorinated compounds in water samples using cationic fluorinated metal organic framework membrane coupled with UHPLC-MS/MS

Global concerns stem from the environmental crisis have compelled researchers to develop selective and sensitive methods for the identification and measurement of emerging pollutants in the environmental matrices. The cationic F-TMU-66⁺Cl^-/polyvinylidene fluoride metal-organic frameworks (MOFs) mixed matrix membrane (F-TMU-66⁺Cl^-/PVDF MMM) was synthesized and used as a versatile adsorbent with multiple binding sites for the simultaneous extraction of twelve anionic perfluorinated compounds (PFCs) from reservoir water samples. The physical and chemical characteristics of the materials, as well as adsorption mechanism were fully surveyed by various instrumental techniques. Important extraction parameters, including amount of MOFs, pH, desorption conditions, and salinity were systematically investigated and optimized. The combination of dispersive membrane solid extraction based on F-TMU-66⁺Cl^-/PVDF MMM with ultra-high performance liquid chromatography-tandem mass spectrometry provided ultra-low limit of detections within the range of 0.03-0.48 ng/L. By virtue of the simplicity and robustness of the extraction procedure, high sensitivity of detection scheme, good stability and selectivity of the F-TMU-66⁺Cl^-/PVDF MMM, the developed method exhibits excellent practicability for ultra-trace analysis of anionic PFCs in water samples.

Research progress of metal organic frameworks and their derivatives for adsorption of anions in water: A review

Anion pollution in water has become a problem that cannot be ignored. The anion concentration should be controlled below the national emission standard to meet the demand for clean water. Among the methods for removing excess anions in water, the adsorption method has a unique removal performance, and the core of the adsorption method is the adsorbent. In recent years, the emerging metal-organic frameworks (MOFs) have the advantages of adjustable porosity, high specific surface area, diverse functions, and easy modification. They are very competitive in the field of adsorption of liquid anions. This article focuses on the adsorption of fluoride, arsenate, chromate, radioactive anions (ReO₄^-, TcO₄^-, SeO₄^2-/SeO₃^2-), phosphate ion, chloride ion, and other anions by MOFs and their derivatives. The preparation methods of MOFs are introduced in turn, the application of different types of metal-based MOFs to adsorb various anions were discussed in categories with their crystal structure and functional groups. The influence on the adsorption of anions is analyzed, including the more common and special adsorption mechanisms, adsorption kinetics and thermodynamics, and regeneration performance are briefly described. Finally, the current situation of MOFs adsorption of anions is summarized, and the outlook for future development is summarized to provide my own opinions for the practical application of MOFs.

Visual Hg(II) sensing in aqueous solution via a new 2,5-Bis(4-pyridyl)thiazolo[5,4-d]thiazole-based fluorescence coordination polymer

A new fluorescence coordination polymer [Zn(Py₂TTz)(5-OH-IPA)]_n (1) (Py₂TTz = 2,5-bis(4-pyridyl)thiazolo[5,4-d]thiazole, 5-OH-IPA = 5-hydroxyisophthalic acid dianion) was synthesized, which exhibited the characteristics of fluorescence quenching and bathochromic shift toward Hg(II) in aqueous solution at pH 7.00. Mechanism study showed that the interactions between Hg(II) ions and Py₂TTz ligands in 1 were responsible for the fluorescence emission change. Thanks to the specific interactions between 1 and Hg(II), excellent selectivity was achieved both in aqueous solution and in solid test paper. The detection limit of 1 for Hg(II) sensing was 125.76 nmol L^-1 and a linear rang was 1.00-10.00 μmol L^-1. More importantly, satisfactory recovery and accuracy of 1 for Hg(II) sensing were also obtained in buffer-free real water samples.

Influence of aquifer heterogeneity on Cr(VI) diffusion and removal from groundwater

Previous studies have indicated aquifer heterogeneity has an important influence on the removal of Cr(VI) in groundwater, but little attention is paid to the effects of aquifer heterogeneity during the process especially under conditions like actual groundwater temperature and hydraulic gradient in the field. Thus, in this study, in situ remediation of Cr(VI)-contaminated shallow groundwater in a sandbox was conducted, and the influences of the heterogeneous aquifer composed of coarse, medium, and fine sand on Cr(VI) diffusion and removal before and after emulsified vegetable oil (EVO) injection were investigated, under the conditions of 19±0.5 °C and hydraulic gradient 3‰. The results show that Cr(VI) diffused consistently with groundwater from top left to bottom right; Cr(VI) spread faster in the horizontal direction than in vertical direction, and the horizontal diffusion of Cr(VI) in coarse, medium, and fine sand was 0.054 m/day, 0.036 m/day, and 0.018 m/day, respectively; a high performance of EVO toward Cr(VI) removal by over 95% was mainly because different concentrations of microorganisms migrated among heterogeneous aquifers vertically and horizontally; compared with coarse and medium sand, fine sand, with a better adsorption capacity and a lower permeability, retained relatively more microorganisms, providing favorable conditions during the remediation; a stable and unified effective removal zone, similar to the shape of Ʃ (approximately 1357.87 cm2), was ultimately formed downstream of the injection well.

Selective perrhenate/pertechnetate removal by a MOF-based molecular trap

Rational design of anion-exchange materials for selective elimination of radioactive anionic contaminants poses a great challenge. Rather than relying on a size-compatible effect, combination of nano-sieve pore, hydrophobic cationic cavity,...

Adsorption of Chromium (VI) by Cu (I)-MOF in Water: Optimization, Kinetics, and Thermodynamics

To investigate the adsorption behavior of Cu (I)-MOF material for chromium (VI) in water, the parameters of influencing adsorption were optimized and found as follows: the optimal pH was 6 for the adsorption of Cr (VI) by the Cu (I)-MOF, the optimal amount of adsorbent was 0.45 g·L−1, and the adsorption saturation time was within 180 min. Subsequently, the kinetics results were fitted by four models such as pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models. Among them, the adsorption of chromium (VI) was more inclined to the pseudo-first-order model (Radj2 = 0.9230). Then, the isotherm data were fitted by Langmuir and Freundlich models. The results indicated that Langmuir isotherm was the excellent match model (Radj2 = 0.9827). It belongs to a monolayer adsorption, and the maximum adsorption capacity was 95.92 mg·g−1. Subsequently, the thermodynamic parameters of the adsorption were calculated as follows: enthalpy change (ΔHθ) was −8.583 kJ·mol−1, entropy change (ΔSθ) was −8.243 J·mol−1 K−1, and the Gibbs function change (ΔGθ) was less than zero in the temperature range of 288–328 K, indicating that the reaction was spontaneous. Finally, both the spectra of infrared and XPS supported the adsorption mechanism that belonged the ion exchange. The spectra of XRD and SEM images shown that the structure of Cu (I)-MOF remained stable for at least 3 cycles. In conclusion, Cu (I)-MOF material has a high adsorption capacity, good water stability, low cost, and easy to prepare in large quantities in practical application. It will be a promising adsorbent for the removal of Cr (VI) from water.

Alkali Metal Ion-exchange in a Metal-Organic Framework Based on Lanthanum and 1,4-Phenylenebis(methylidyne)tetrakis(phosphonic acid)

The ion-exchange selectivity of four metal-organic frameworks (denoted as MLaL), formed by alkali metal ions (M⁺), La³⁺, and 1,4-phenylenebis(methylidyne)tetrakis(phosphonic acid) (L), was examined. Unusual selectivity for the alkali metal ions was observed, which did not follow the previously proposed mechanism that was explained based on the ion-size similarity in the framework. The changes in the crystal structures after ion-exchange reactions were observed by powder X-ray diffraction analysis. The change in the lattice energy in a mixed-metal framework is likely to be one of the significant parameters to affect ion-exchange selectivity.

Capture of Toxic Oxoanions from Water Using Metal-Organic Frameworks

The effective capture of common water contaminants using metal-organic frameworks (MOFs) presents a remedy for current environmental concerns arising from the pollution of water sources. The crystalline porous nature of MOFs, their high internal surface area, and exceptional tunability make them suitable candidates for sequestration and removal of pollutants. However, the efficiency of capture depends largely on the nature of the interactions between the anions and the MOF. In this work, to elucidate the host-guest interactions involved in the capture of such pollutants, we explore three characteristically different MOFs: ZIF-8, iMOF-2c, and MOF-74. We demonstrate by ab initio electronic structure calculations the importance of exploiting qualitatively different binding modes for strong host-guest interactions available in the selected MOFs. Our simulations reveal the relative performance of neutral and cationic adsorbents while underscoring the importance of employing MOFs containing open metal sites for the efficient uptake of anions.

High Proton Conductivity in Nafion/Ni-MOF Composite Membranes Promoted by Ligand Exchange under Ambient Conditions

Metal-organic frameworks (MOFs) have appeared to be promising competitive candidates as crystalline porous materials for proton conduction. Explorations of the method of preparation of proton conductive MOFs and the proton transfer mechanism have enabled them to attract widespread attention, and tremendous efforts have been made to improve the proton conductivity of MOFs. On the basis of our previous work, we explicitly propose that ligand exchange can upgrade the proton conduction performance of MOFs. Using MOF-azo as the precursor, the proton conductivities of exchange products MOF-bpy and MOF-bpe increase by 3.5- and 2.8-fold, respectively. After the MOFs had been doped into the Nafion matrix to prepare composite membranes, the proton conduction performance of composite membranes filled with subproducts (2.6 × 10^-2 and 1.95 × 10^-2 S cm^-1) is significantly better than that of a composite membrane filled with a parent product (1.12 × 10^-2 S cm^-1) under ambient conditions (without heating or humidifying). The ligand exchange strategy presented herein demonstrates great promise for the development of high-proton conductivity MOFs and MOF composites with expanded future applications.

Humidity-sensitive irreversible phase transformation of open-framework zinc phosphate and its water-assisted high proton conduction properties

Open-framework zinc phosphate (NMe4)(ZnP2O8H3) undergoes irreversible phase transformation. Structural transformation with α (NMe4·Zn[HPO4][H2PO4] the low-temperature phase) and β (NMe4·ZnH3[PO4]2 the high-temperature phase) (Tc = 149 °C) and conduction properties were investigated by single-crystal X-ray diffraction, differential scanning calorimetry, and alternating current (ac) impedance. The open-framework material was sensitive to humidity and β proton conductivity was higher than 10-2 S cm-1 at room temperature and 98% relative humidity (RH). Given that the high proton conductivity of the open-framework material can compete with that of many advanced proton conductors based on metal-organic frameworks (MOFs), it has broad application prospects in various electrochemical devices.

Photoreduction properties of novel Z-scheme structured Sr0.8La0.2(Ti1-δ 4+Ti δ 3+)O3/Bi2MoO6 composites for the removal of Cr(vi)

Novel Z-scheme structured Sr0.8La0.2(Ti1-δ 4+Ti δ 3+)O3/Bi2MoO6 (LSTBM) composites were prepared via a facile two-step solvothermal method. Several characterization techniques were employed to investigate the phases, microstructures, compositions, valence states, oxygen vacancies, surface oxygen absorption, energy band structures and lifetime of photoproduced carriers. It was found that the lifetime and transfer of the photoproduced carriers of LSTBM were better than those of Bi2MoO6 (BMO) and Sr0.8La0.2(Ti1-δ 4+Ti δ 3+)O3 (LSTO). The LSTBM with a molar ratio of BMO/(LSTO + BMO) = 0.07 (denoted as LSTBM7) showed 1.9 and 3.1 times removal rates than those for BMO and LSTO, respectively. Importantly, the built-in electric field in the heterojunction of LSTBM and Ov-s, especially in Ov-s on the higher-Fermi-level side of the heterojunction, had co-played roles in prolonging the lifetime and improving the transfer of photogenerated carriers. The photoproduced e- played a dominant role in reducing Cr(vi) to Cr(iii) and the produced Cr(iii) tends to form Cr(OH)3 and adsorb onto the surface of the photocatalyst to decrease the nucleation energy. The possible reduction route for Cr(vi) to Cr(iii) over LSTBM7 was figured out. This study implies that inducing Ov-s on the higher-Fermi-level side of the Z-scheme heterojunction is a more effective route for separating the photogenerated electrons and holes and improving the transfer of photogenerated carriers.

Construction of porous 2D MOF nanosheets for rapid and selective adsorption of cationic dyes

Porous two-dimensional metal-organic framework (2D-MOF) nanosheets Zr-BTB-H4TBAPy and PCN-134-2D were synthesized and characterized by X-ray diffraction (XRD), N2 adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and zeta potential and subjected to dye adsorption and separation investigation. These 2D-MOF nanosheets are ultrathin, have large surface area and high water stability and can selectively adsorb cationic dyes, rhodamine B (RhB) and methylene blue (MLB), from aqueous solutions, with removal rates of nearly 100% within 10 min. The adsorption kinetic results showed that Zr-BTB-H4TBAPy and PCN-134-2D could effectively and selectively remove cationic dyes from water, followed a pseudo-second-order kinetic model and fitted well with the Freundlich isotherm. The adsorption mechanism studies further indicated that their excellent adsorption and separation performance could be ascribed to their ultrathin and porous features, plentiful exposed surface-active sites, and favorable electrostatic interactions between the adsorbents and cationic dyes. Moreover, the porous 2D MOF nanosheets displayed excellent recyclability and reusability. These outstanding features make them potentially applicable for rapid and selective cationic dye adsorption and separation.

Enhanced removal of toxic hexavalent chromium from aqueous solution by magnetic Zr-MOF@polypyrrole: performance and mechanism

Magnetic Zr-based metal organic framework (UiO-66) @Polypyrrole (magnetic UiO-66@Ppy) was prepared to eliminate Cr(VI) from water. SEM and TEM results clearly revealed that the magnetic UiO-66@Ppy was a core-double-shell structure with the core of Fe₃O₄, inner shell UiO-66, and outer shell Ppy. The introduction of zirconium MOFs UiO-66 effectively prevented the agglomeration of polypyrrole and provided more available adsorption sites, the surface area increased from 9.57 m²/g (Ppy) to 10.57 m²/g (Fe₃O₄@Ppy) and 52.49 m²/g (magnetic UiO-66@Ppy). The magnetic UiO-66@Ppy possessed a high adsorption capacity of 259.1 mg/g in removing Cr(VI) from water. Adsorption kinetics followed the pseudo-second-order model. The removal of Cr(VI) involved the following mechanisms: (1) electrostatic attraction and ions exchange, the HCrO₄^- was adsorbed on the surface of magnetic UiO-66@Ppy by the protonated N(PpyN⁺) and Cl^-; (2) reduction, Cr(VI) was reduced to Cr(III) by the reductive functional group(-NH-); (3) chelation, Cr(III) was immobilized on adsorbent by amine groups.

MOF based engineered materials in water remediation: Recent trends

The significant upsurge in the demand for freshwater has prompted various developments towards water sustainability. In this context, several materials have gained remarkable interest for the removal of emerging contaminants from various freshwater sources. Among the currently investigated materials for water treatment, metal organic frameworks (MOFs), a developing class of porous materials, have provided excellent platforms for the separation of several pollutants from water. The structural modularity and the striking chemical/physical properties of MOFs have provided more room for target-specific environmental applications. However, MOFs limit their practical applications in water treatment due to poor processability issues of the intrinsically fragile and powdered crystalline forms. Nevertheless, growing efforts are recognized to impart macroscopic shapability to render easy handling shapes for real-time industrial applications. Furthermore, efforts have been devoted to improve the stabilities of MOFs that are subjected to fragile collapse in aqueous environments expanding their use in water treatment. Advances made in MOF based material design have headed towards the use of MOF based aerogels/hydrogels, MOF derived carbons (MDCs), hydrophobic MOFs and magnetic framework composites (MFCs) to remediate water from contaminants and for the separation of oils from water. This review is intended to highlight some of the recent trends followed in MOF based material engineering towards effective water regeneration.

Efficient and Selective Visible-Light-Driven Oxidative Coupling of Amines to Imines in Air over CdS@Zr-MOFs

Construction of porous photoactive MOF-based composite systems is regarded as one of the most effective strategies to improve light harvesting, increase the surface area, provide plenty of exposed active sites, and promote the reduction and oxidation abilities of some organic photocatalytic reactions. Herein, we synthesized porous CdS@Zr-MOF photocatalysts based on the representative photocatalyst CdS and crystalline Zr-MOFs, such as MOF-808, NU-1000, and PCN-222, to illustrate their excellent photocatalytic performance for the synthesis of imines in air. The morphology and composition of these photocatalysts were investigated by X-ray powder diffraction (XRD), inductively coupled plasma-atomic emission spectrometry (ICP-AES), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS), indicating their crystallinity, high porosity, and interfacial interaction between constituents. Compared with individual components, these porous CdS@Zr-MOF composites could remarkably promote photocatalytic activity for the oxidative coupling of amines under air and visible-light conditions. The photocatalytic reaction showed broad substrate suitability. More importantly, the conversion yield reached up to 95% for the inactive aliphatic amines, and imines were formed as the single product. The improvement of the photocatalytic performance of CdS@Zr-MOF composites can be mainly ascribed to their high surface areas, more exposed active sites, excellent dispersion of CdS, and special porous photocatalytic systems, which tune the band gap, broaden the light response range, and facilitate the carrier separation.

Spherical Bi2WO6/Bi2S3/MoS2 n-p Heterojunction with Excellent Visible-Light Photocatalytic Reduction Cr(VI) Activity

Exploiting excellent photocatalytic activity and stable heterostructure composites are of critical importance for environmental sustainability. The spherical Bi₂WO₆/Bi₂S₃/MoS₂ n-p heterojunction is first prepared via an in situ hydrothermal method using Bi₂WO₆, Na₂MoO₄·2H₂O, and CH₄N₂S, in which the intermediate phase Bi₂S₃ is formed due to chemical coupling interaction of Bi₂WO₆ and CH₄N₂S. Scanning electron microscopy indicates that the compactness of the sample can be easily adjusted by changing the contents of S and Mo sources in the solution. The results of ultraviolet–visible (UV–vis) diffuse reflectance spectra, photoluminescence, transient photocurrent response, and electrochemical impedance spectra indicate that the formation of heterojunctions contributes to enhancing visible-light utilization and promoting photogenerated carrier separation and transfer. The composite material is used as a catalyst for the visible light photocatalytic reduction of Cr(VI). Remarkably, the optimal Bi₂WO₆/Bi₂S₃/MoS₂ n-p heterojunction achieves the greatest Cr(VI) reduction rate of 100% within 75 min (λ > 420 nm, pH = 2); this rate is considerably better than the Cr(VI) reduction rate of pure Bi₂WO₆. The recycling experiment also reveals that the photocatalytic performance of the n-p heterojunction toward Cr(VI) is still maintained at 80% after three cycles, indicating that the n-p heterojunction has excellent structural stability. The capture experiment proves that the main active species in the system are electrons. The reasonable mechanism of Bi₂WO₆/Bi₂S₃/MoS₂ photocatalytic reduction Cr(VI) is proposed. Our work provides new research ideas for the design of ternary heterojunction composites and new strategies for the development of photocatalysts for wastewater treatment.

A Highly Efficient Coordination Polymer for Selective Trapping and Sensing of Perrhenate/Pertechnetate

A porous cationic Ag(I) coordination polymer, [Ag(1,2,4,5-p4b)](SbF₆) (TJNU-302) with the ligand 1,2,4,5-p4b (1,2,4,5-tetra(pyridin-4-yl)benzene), is reported that shows high sorption capacity (211 mg g^-1) and distribution coefficient K_d (5.8 × 10⁵ mL g^-1) as well as outstanding selectivity in 500 times excess of CO₃^2- or PO₄^3- anion for perrhenate removal. TJNU-302 can act as a crystalline turn-off sensor for perrhenate upon UV radiation. In this way, a test paper strip for sensing ReO₄^- could be produced. In water solution, TJNU-302 shows an efficient fluorescence quenching response to ReO₄^- ion, with the highest quenching percentage (86%) among all reported ReO₄^- sensors. These results could be elucidated by the bonding properties of single-crystal structures of TJNU-302 before and after perrhenate sorption, as well as density functional theory (DFT) calculations.

Selective removal of anionic dyes with exceptionally high adsorption capacity and removal of dichromate (Cr2O72-) anion using Ni-Co-S/CTAB nanocomposites and its adsorption mechanism

An adsorbent Ni-Co-S/CTAB nanocomposites have been synthesized at low temperature in aqueous medium using nickel acetate, cobalt acetate, thioacetamide and hexadecyltrimethyl ammonium bromide (CTAB) as reagents. The nanocomposites exhibited exceptionally high adsorption capacity towards anionic adsorbates with high selectivity. The maximum adsorption capacity of nanocomposites were 1995.02 mg g^-1 for Congo red (CR), 2223.15 mg g^-1 for Methyl orange (MO) anionic dyes and 790.69 mg g^-1 for Cr₂O₇^2- metal anion. They exhibit negligible adsorption ability towards cationic dyes 2.33 mg g^-1 for MB and 42.05 mg g^-1 for RhB. The nanocomposite is able to adsorb anionic dyes from a binary mixture of cationic and anionic dyes with high separation factor. It also shows good results with synthetic effluents. The removal of adsorbates followed modified Zhu and Gu isotherm model. FTIR and Zeta-potential measurement confirmed that electrostatic interactions are predominating factor for the adsorption of anionic adsorbates followed by hydrophobic interactions between adsorbates. Moreover, ethanol is used to regenerate the adsorbent and reused up to five times with good adsorption capacities. Thus, the nanocomposite can be used as an efficient adsorbent for the removal and seperation of anionic adsorbates from binary mixtures as well as synthetic effluents.