Activation of peroxymonosulfate by Fe doped g-C3N4 /graphene under visible light irradiation for Trimethoprim degradation

Electrochemiluminescence quenching effect of Cu2O towards flower-like ferric ion-doped g-C3N4 and its application for Cyfra21-1 immunosensing

In this article, ferric ion-doped floral graphite carbon nitride (Fe-CN-3, energy donor) was used to construct the substrate of the immunosensor and copper oxide nanocubes (Cu2O, energy acceptor) were taken as an efficient ECL quenching probe. A sandwich quench electrochemiluminescence (ECL) immunosensor for soluble cytokeratin 19 fragment (Cyfra21-1) detection was preliminarily developed based on a novel resonant energy transfer donor-acceptor pair. Fe-CN-3, a carbon nitride that combines the advantages of metal ion doping as well as morphology modulation, is used in ECL luminophores to provide more excellent ECL performance, which makes a significant contribution to the application and development of carbon nitride in the field of ECL biosensors. The regular shape, high specific surface area and excellent biocompatibility of the quencher Cu2O nanocubes facilitate the labeling of secondary antibodies and the construction of sensors. Meanwhile, as an energy acceptor, the UV absorption spectrum of Cu2O can overlap efficiently with the energy donor's ECL emission spectrum, making it prone to the occurrence of ECL-RET and thus obtaining an excellent quenching effect. These merits of the donor-acceptor pair enable the sensor to have a wide detection range of 0.00005-100 ng/mL and a low detection limit of 17.4 fg/mL (S/N = 3), which provides a new approach and theoretical basis for the clinical detection of lung cancer.

Efficient photoelectrocatalytic degradation of pollutants over hydrophobic carbon felt loaded with Fe-doped porous carbon nitride via direct activation of molecular oxygen

Developing a photoelectric cathode capable of efficiently activating molecular oxygen to degrade pollutants is a coveted yet challenging goal. In pursuit of this, we synthesize a Fe doped porous carbon nitride catalyst (Fe-CN) using an ionothermal strategy and subsequently loaded it on the hydrophobic carbon felt (CF) to fabricate the Fe-CN/CF photoelectric cathode. This cathode benefits from the synergistic effects between the porous CN support and the highly dispersed Fe species, which enhance O2 absorption and activation. Additionally, the hydrophobic CF serves as a gas diffusion layer, accelerating O2 mass transfer. These features enable the Fe-CN/CF cathode to demonstrate notable photoelectrocatalytic (PEC) degradation efficiency. Specifically, under optimal conditions (cathodic bias of -0.3 VAg/AgCl, pH 7, and a catalyst loading of 3 mg/cm2), the system achieves a 76.4% removal rate of tetracycline (TC) within 60 min. The general application potential of this system is further underscored by its ability to remove approximately 98% of 4-chlorophenol (4-CP) and phenol under identical conditions. Subsequent investigations into the active species and degradation pathways reveal that 1O2 and h+ play dominant role during the PEC degradation process, leading to gradually breakdown of TC into less toxicity, smaller molecular intermediates. This work presents a straightforward yet effective strategy for constructing efficient PEC systems that leverage molecular oxygen activation to degrade pollutants.

2D/2D heterojunctions for rapid and self-cleaning removal of antibiotics via visible light-assisted peroxymonosulfate activation: Efficiency, synergistic effects, and applications

Developing eco-friendly and efficient technologies for treating antibiotic wastewater is crucial. Traditional methods face challenges in incomplete removal, high costs, and secondary pollution. Heterogeneous peroxymonosulfate (PMS) activation assisted by visible light shows promise, but suitable activators remain a huge challenge. Here, we synthesized cost-effective carbon nitride/bismuth bromide oxide (CN/BiOBr) heterojunctions. Such a heterojunction achieved rapid PMS activation, achieving over 90.00% tetracycline (TC) removal only within 1 min (kobs of 2.23 min-1), surpassing previous systems by nearly 1-2 orders of magnitude and even remarkably superior to the popular single-atom catalysts. The system exhibited self-cleaning properties, maintaining activity after 8 cycles and stability across a wide pH range (3.01 to 9.03). Quenching experiments and theoretical calculations elucidated the exclusive •O2- species involvement and removal pathways. Eco-toxicity assessment and total organic carbon results confirmed simultaneous degradation, detoxification, and mineralization. This system also showed excellent resistance to environmental factors, e.g., coexisting anions, varying pH, and water sources, and demonstrated potential in coking and medical wastewater purification. This study presents a novel technique for rapidly decontaminating antibiotic wastewater through visible light-assisted PMS activation and introduces innovative bionic catalytic oxidation combining light and darkness for practical applications.

Graphene-based photocatalysts for degradation of organic pollution

Compared with the traditional wastewater treatment technology, semiconductor photocatalysis is a rapidly emerging environment-friendly and efficient Advanced Oxidation Process for degradation of refractory organic contaminants. Single-component semiconductor photocatalysts exhibit poor photocatalytic performance and cannot meet the requirements of wastewater treatment. The combination of semiconductor photocatalysts and Graphene can effectively improve the photocatalytic activity and stability of semiconductor photocatalysts. This review focuses on the synergistic effect of several types of semiconductors with Graphene for photocatalytic degradation of organic pollutants. After a brief introduction of the photodegradation mechanism of semiconductor materials and the basic description of Graphene, the synthesis, characterization and degradation performance of various Graphene-based semiconductor photocatalysts are emphatically introduced.

Visible light activation of ferrate(VI) by oxygen doped ZnIn2S4/black phosphorus nanolayered heterostructure: Accelerated oxidation of trimethoprim

The increasing consumption of antibiotics and their subsequent release to wastewater or groundwater and ultimately to the water supply (or drinking water) has great concerns. This paper presents a visible light (VL) activated ferrate(VI) (FeVIO42-, Fe(VI)) system to degrade the selected antibiotic, trimethoprim (TMP), efficiently. An oxygen doped ZnIn2S4 nanosheet (O-ZIS) coupled with a black phosphorus (BP) heterostructure (O-ZIS/BP), is fabricated by a simple electrostatic self-assembly method. The O-ZIS/BP photocatalyst is comprehensively characterized by surface and analytical techniques, which show superior separation efficiency of the photoinduced charge carriers in the heterostructure. A VL-O-ZIS/BP-Fe(VI) system achieves more than 80% removal in 1.0 min and complete removal of TMP in 3.0 min. Comparatively, only ⁓7% and ⁓24% of TMP are degraded by O-ZIS/BP and Fe(VI) in 1.0 min, respectively. The degradation experiments using probe molecules of reactive species and electron paramagnetic resonance (EPR) measurements reveal involvement of superoxide (O2-•), hydroxyl radical (•OH), and iron(V)/iron (IV) (FeV/FeIV) species in the mechanism of TMP degradation. Oxidized products of TMP are identified and reaction pathways are given. Theoretical calculations predict the initial attack on the TMP molecule by the reactive species in the VL-O-ZIS/BP-Fe(VI) system. The activation of Fe(VI) by VL-heterostructure photocatalysts accelerates the degradation of antibiotics, demonstrating its potential for water depollution.

High yielded Co-C derived from polyester-Cobalt carbothermal reduction for efficient activation of peroxymonosulfate to degrade levofloxacin

A kind of high yield and recyclable Cobalt-Carbon composite (Zn₁Co₅/P_nC) was prepared by carbothermal reduction process, in which the cobalt acetate and zinc acetate were considered as Zn and Co precursors, and the polyester waste was evolved as the carbon precursor. The morphology, structure and composition of the composite were characterized using scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. Results showed that evaporation of zinc contributed to the formation of porous carbon structure, and the Co nanoparticles were wrapped and protected by the porous carbon matrix. The Zn₁Co₅/P_nC activated peroxymonosulfate (PMS) system (Zn₁Co₅/P_nC/PMS) was constructed to degrade the levofloxacin (LEV). The activity and mechanism of LEV degradation was understood. The LEV degradation efficiency was high to 96.60% within 90 min in the presence of Zn₁Co₅/P₄C. Moreover, the Zn₁Co₅/P₄C still maintained favorable PMS activation performance after five-cycle runs. The results show that the Zn₁Co₅/P₄C played positive role in activating the PMS, it may be due to the facts that the polyester derived carbon could supported the Co while the evaporated Zn could increase the surface area of Zn₁Co₅/P₄C, leading to the increased activity. The possible degradation pathways were proposed by identifying the intermediate products through liquid chromatography-mass spectrometry analysis. This study put forward a promising method to use polyester waste to synthesize high yield cobalt-carbon composite for degrading the antibiotic in wastewater.

Orientated construction of visible-light-assisted peroxymonosulfate activation system for antibiotic removal: Significant enhancing effect of Cl. JOURNAL OF HAZARDOUS MATERIALS 2023;445:130476. [PMID: 36455327 DOI: 10.1016/j.jhazmat.2022.130476]

Antibiotic contaminants can migrate over long distances in the water, thus possibly causing severe detriment to the environment and even potential harm to human health. Heterogeneous activation of peroxymonosulfate (PMS) assisted by visible light is an emerging and promising technology for the purification of such wastewater. This study designed an ultra-efficient and stable PMS activator (FeCN) to restore the typical antibiotic-polluted water under harsh conditions. About 90.94% of sulfamethoxazole (SMX) was degraded in 35 min in the constructed FeCN+PMS/vis system, and the reaction rate constant was nearly 50-fold higher than direct photocatalysis. Electron spin resonance, quenching experiments, LC/MS technique, eco-toxicity assessment, and density functional theory validated that the SMX removal was dominated by the attack of h⁺, ^•O₂^- and ¹O₂ on the active atoms of SMX molecules with high Fukui index, presenting as a simultaneous degradation and detoxification process. Such a visible-light-assisted PMS activation system also had good resistance to the environmental water bodies and a broad spectrum in the degradation of various pollutants. In particular, Cl^- (50 mM) could significantly accelerate the removal of SMX with a 32.6-fold increase in catalytic activity, and the mineralization efficiency could reach 56.6% under identical conditions. Moreover, this Cl^- containing system excluded the degradation products of disinfection by-products, and such a system was also versatile for different contaminants. This work demonstrates the feasibility of the FeCN+PMS/vis system for the remediation of antibiotic-contaminated wastewater in the presence and absence of Cl^-, and also highlights their great potential in WWTPs.

Integrated photocatalysis and moving bed biofilm reactor (MBBR) for treating conventional and emerging organic pollutants from synthetic wastewater: Performances and microbial community responses

Increasing concern for emerging organic pollutants (e.g. antibiotics) urges improvements in conventional biological wastewater treatment processes. This study examined the performance of an integrated photocatalysis and moving bed biofilm reactor (MBBR) system in treating synthetic wastewater containing sulfamethoxazole (SMX). It was found that the integrated system could remove over 80.5 % of SMX and 67.7-80.7 % of chemical oxygen demand (COD) with a hydraulic retention time of 24 h. The introduction of photocatalysis had no impact on COD removal and significantly enhanced SMX removal. High-throughput analysis indicated that microbial community greatly altered due to photocatalytic oxidation stress, with clostridiaceae and enterobacteriaceae becoming dominant families. Nevertheless, microorganisms maintained metabolic activity, which may be ascribed to the protection of carriers and microbial self-preservation by secreting extracellular polymeric substances and antioxidant enzymes. Collectively, this study sheds light on treating wastewater containing conventional and emerging organic pollutants by integrating photocatalysis with MBBR.

Sulfate radicals-based advanced oxidation processes for the degradation of pharmaceuticals and personal care products: A review on relevant activation mechanisms, performance, and perspectives

Owing to the rapid development of modern industry, a greater number of organic pollutants are discharged into the water matrices. In recent decades, research efforts have focused on developing more effective technologies for the remediation of water containing pharmaceuticals and personal care products (PPCPs). Recently, sulfate radicals-based advanced oxidation processes (SR-AOPs) have been extensively used due to their high oxidizing potential, and effectiveness compared with other AOPs in PPCPs remediation. The present review provides a comprehensive assessment of the different methods such as heat, ultraviolet (UV) light, photo-generated electrons, ultrasound (US), electrochemical, carbon nanomaterials, homogeneous, and heterogeneous catalysts for activating peroxymonosulfate (PMS) and peroxydisulfate (PDS). In addition, possible activation mechanisms from the point of radical and non-radical pathways are discussed. Then, biodegradability enhancement and toxicity reduction are highlighted. Comparison with other AOPs and treatment of PPCPs by the integrated process are evaluated as well. Lastly, conclusions and future perspectives on this research topic are elaborated.

Fe-g-C3N4/reduced graphene oxide lightless application for efficient peroxymonosulfate activation and pollutant mineralization: Comprehensive exploration of reactive sites

To overcome the shortcomings of homogeneous Fe ion activating peroxymonosulfate (PMS), such as high pH-dependence, limited cycling of Fe(III)/Fe(II) and sludge production, graphite carbon nitride (g-C₃N₄) is chosen as a support for Fe ions, and reduced graphene oxide (rGO) is employed to facilitate the electron transfer process, thereby enhancing catalysis. Herein, a ternary catalyst, Fe-g-C₃N₄/rGO, is first applied under lightless condition for PMS activation, which exhibits ideal performance for contaminant mineralization. 82.5 % of the total organic carbon (TOC) in 100 mL of 5 mg/L bis-phenol A (BPA) was removed within 20 min by the optimal catalyst named 30%rFe_0.2CN, which shows a strong pH adaptability over the range of 3-11 compared with a common Fenton-like system. Moreover, the highly stable Fe-g-C₃N₄/rGO/PMS catalytic system resists complex water matrices, especially those with high turbidity. To unveil the mechanism of PMS activation and pollutant degradation, the physicochemical properties of the as-prepared catalysts are comprehensively characterized by multiple techniques. The Fe(III) contained in both the Fe-N group and α-Fe₂O₃ component of 30%rFe_0.2CN not only directly reacts with PMS to produce sulfate radicals (SO₄^-) and hydroxyl radicals (OH), but also combines with PMS to form the essential [Fe(III)OOSO₃]⁺ active complex, thereby generating superoxide radicals (O₂^-) and singlet oxygen (¹O₂). Among the various reactive oxidizing species, ¹O₂ plays an important role in pollutant removal, which is additionally generated by the CO moiety of the catalyst activating PMS as well as PMS self-oxidation, indicating the dominance of the non-radical pathway in the pollutant degradation process. Due to the advantages of high efficiency, wide pH adaptability and stability, the proposed lightless Fe-g-C₃N₄/rGO/PMS catalytic system represents a promising avenue for practical wastewater purification.

Co-doped Fe3O4/α-FeOOH for highly efficient peroxymonosulfate activation to degrade trimethoprim: Occurrence of hybrid non-radical and radical pathways

Trimethoprim (TMP), as a widely used chemotherapeutic antibiotic agent, has caused potential risks to the aquatic environment. In this study, magnetic Co-doped Fe₃O₄/α-FeOOH was fabricated by a facile one-step ageing method and used for activation of peroxymonosulfate (PMS) in TMP degradation. It was found that low catalyst (0.5 g/L) and PMS addition (0.2 mM) led to the high degradation efficiency of TMP (97.2%, k_obs = 0.11211 min^-1) over a wide range of pH. The oxidation of active radical (SO₄·^-) and non-radical singlet oxygen (¹O₂) co-acted on TMP degradation. Besides, PMS was activated through the cycles between Co(II)/Co(III) and Fe(II)/Fe(III). Fifteen degradation intermediates of TMP were identified by LC-MS, and three possible degradation pathways including hydroxylation, demethylation, and cleavage were proposed. The recovered catalysts exhibited high stability and reusability, maintaining 80% TMP removal efficiency with inappreciable metal leaching (0.012 mg/L of Co, 0.113 mg/L of Fe) after six cycles. Besides, the Co-Fe₃O₄/α-FeOOH/PMS system was highly tolerant to inorganic anions and actual water bodies (river water, lake water, tap water, and sewage plant effluent). Overall, this work provided a promising way to the potential application of Fe-based binary metal oxide for PMS activation.

Efficient Activation of Peroxymonosulfate by V-Doped Graphitic Carbon Nitride for Organic Contamination Remediation

Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) activation have been developed as an ideal pathway for completely eradication of recalcitrant organic pollutants from water environment. Herein, the V-doped graphitic carbon nitride (g-C₃N₄) is rationally fabricated by one-step thermal polymerization method to activate PMS for contamination decontamination. The results demonstrate the V atoms are successfully integrated into the framework of g-C₃N₄, which can effectively improve light absorption intensity and enhance charge separation. The V-doped g-C₃N₄ displays superior catalytic performance for PMS activation. Moreover, the doping content has a great influence on the activation performances. The radical quenching experiments confirm •O₂^-, SO₄^•-, and h⁺ are the significant species in the catalytic reaction. This work would provide a feasible strategy to exploit efficient g-C₃N₄-based material for PMS activation.

C-O band structure modified broad spectral response carbon nitride with enhanced electron density in photocatalytic peroxymonosulfate activation for bisphenol pollutants removal

Here, a simple one-step calcination method uses glycolic acid (GA) and urea to synthesize C-O band structure modified carbon nitride with broad spectral response, which is used to construct a peroxymonosulfate/visible light (PMS/vis) system. The solid-state ¹³C NMR proved that C-O band structure was successfully introduced into the carbon nitride. Density functional theory (DFT) calculation show that the introduction of C-O band structure shortens the band gap of 0.05 g GA modified CN (0.05 GA-CN). Besides, Ultraviolet photoelectron spectroscopy (UPS) further illustrate that the 0.05 GA-CN has a higher charge density and promotes the degradation of pollutants. In PMS/vis system, 0.05 GA-CN can completely degrade bisphenol A (BPA) within 36 min. In addition, 0.05 GA-CN can also degrade bisphenol E (BPE) and bisphenol F (BPF). The cyclic voltammetry (CV) curve show that the introduction of C-O band structure enhances the activation ability of PMS. At the same time, 0.05 GA-CN/PMS has enhanced the activity of degrading BPA under blue light (450-462 nm), green light (510-520 nm) and red light (610-625 nm). This research provides a new method to synthesize carbon nitride with enhanced electron density for degradation of bisphenol pollutants in PMS/vis system.

Enhanced adsorption and catalytic degradation of antibiotics by porous 0D/3D Co3O4/g-C3N4 activated peroxymonosulfate: An experimental and mechanistic study

In this work, Co₃O₄/g-C₃N₄ catalyst with highly efficient adsorption and degradation of antibiotics was developed based on the combination of three-dimensional (3D) porous morphological controls of g-C₃N₄ and the loading of Co₃O₄ quantum dots (Co₃O₄ QDs). It was discovered that the catalyst can effectively activate peroxymonosulfate (PMS) through a non-photochemical path, and a high tetracycline elimination rate of 99.7% can be achieved within 18 min. The characterization and density functional theory calculation results demonstrated that the porous 3D structure can not only promote the substrate adsorption reaction but also provide large surface area and countless exposed active sites for catalytic reaction. The introduction of Co₃O₄ QDs lowered activation energy barrier and lead to high energy of PMS adsorption. More efficient charge migration between the catalyst and PMS further accelerated PMS activation. Thus, leading to the excellent catalytic performance. In addition, non-free radical mediated degradation mechanism of catalytic activity was also proposed. This work provides a scheme for designing novel and efficient PMS activators for the removal of abusive antibiotics from aqueous environments.

Revealing dual roles of g-C3N4 in Chlorella vulgaris cultivation

Booming graphitic carbon nitride (g-C₃N₄) photocatalyzed water splitting increases crisis of aquatic contamination. However, a controversial understanding regarding effect of g-C₃N₄ on growth of microalgae still exists. Accordingly, Chlorella vulgaris were cultured in 0-250 mg/L of g-C₃N₄ with biomass named as C-0, C-50, C-100, C-150, C-200, and C-250, respectively. g-C₃N₄ below 200 mg/L was beneficial to short-term cultivation of microalgae, while it was harmful to long-time cultivation. Protein factions of C-0, C-100, and C-250 were 41.4, 42.3, and 36.4 wt%, while their lipid factions varied from 21.5, 16.9, to 17.8 wt%, respectively. In short-term cultivation, superoxide dismutase's activity of C-0, C-150, and C-250 increased dramatically, while accumulated H₂O₂ led to increased activity of catalase. However, it started to decrease once antioxidant enzymes were per-oxidized, leading to increase of malondialdehyde content. In long-term cultivation, activities of superoxide dismutase, catalase and malondialdehyde content decreased dramatically owning to peroxidation of algae. Scavenger tests with tertiary butanol and triethanolamine implied that·OH was dominate parameter affecting growth of microalgae. This work indicates that g-C₃N₄ below 200 mg/L is propitious to short-term cultivation of microalgae, while it is bad to long-time cultivation of microalgae, revealing dual rules of g-C₃N₄ in Chlorella vulgaris cultivation.

Intimately coupled photocatalysis and biodegradation for effective simultaneous removal of sulfamethoxazole and COD from synthetic domestic wastewater

The inefficiency of conventional biological treatment for removing sulfamethoxazole (SMX) is posing potential risks to ecological environments. In this study, an intimately coupled photocatalysis and biodegradation (ICPB) system consisting of Fe³⁺/g-C₃N₄ and biofilm was fabricated for the treatment of synthetic domestic wastewater containing SMX. The results showed that this ICPB system could simultaneously remove 96.27 ± 5.27% of SMX and 86.57 ± 3.06% of COD, which was superior to sole photocatalysis (SMX 100%, COD 4.2 ± 0.74%) and sole biodegradation (SMX 42.21 ± 0.86%, COD 95.1 ± 0.18%). Contributors to SMX removal in the ICPB system from big to small include LED photocatalysis, biodegradation, LED photolysis, and adsorption effect of the carrier, while COD removal was largely ascribed to biodegradation. Increasing initial SMX concentration inhibits SMX removal rate, while increasing photocatalyst dosage accelerates SMX removal rate, and both had no impact on COD removal. Our analysis of biofilm activity showed that microorganisms in this ICPB system maintained a high survival rate and metabolic activity, and the microbial community structure of the biofilm remained stable, with Nakamurella and Raoultella being the two dominant genera of the biofilm. This work provides a new strategy to effectively treat domestic wastewater polluted by antibiotics.

Advances in application of g-C3N4-based materials for treatment of polluted water and wastewater via activation of oxidants and photoelectrocatalysis: A comprehensive review

Recently, graphitic carbon nitride (g-C₃N₄) has received significant attention as a non-metallic, visible-light-activated photocatalyst for treating water and wastewater by degrading contaminants. Accordingly, previous review articles have focused on the photocatalytic properties of g-C₃N₄-based materials. However, g-C₃N₄ has several other notable features, such as high adsorption affinity towards aromatic substances and heavy metals, high thermal and chemical resistances, good compatibility with various materials, and easily scalable synthesis; therefore, in addition to simple photocatalysis, it can be widely used in other decontamination systems based on activation of oxidants and electrocatalysis. This critical review provides a comprehensive summary of recent advancements in g-C₃N₄-based materials and their use in treating polluted water and wastewater via the following routes (1) activation of oxidizing agents (e.g., hydrogen peroxide, ozone, peroxymonosulfate, and persulfate): and (2) photoelectrocatalysis using fabricated g-C₃N₄-based photocathodes and photoanodes. For each route, we briefly summarize the primary mechanisms, distinctive features, and performances of various water treatment systems using g-C₃N₄-based catalysts. We also highlight the specific roles of g-C₃N₄ in improving the efficiencies of these treatment processes. The advantages and limitations of previously reported water treatment systems using g-C₃N₄-based materials are also described and compared in this review. Finally, we discuss the challenges and prospects of improving g-C₃N₄-based water purification applications.

Peroxymonosulfate Activation by Bi2WO6/BiOCl Heterojunction Nanocomposites under Visible Light for Bisphenol A Degradation

The combination of peroxymonosulfate (PMS) activation and photocatalysis has proven to be effective for organic contaminants treatment. However, the construction of an efficient catalytic material is an important challenge. Herein, novel Bi₂WO₆/BiOCl heterojunction nanocomposites were successfully designed and fabricated using a facile and effective strategy for bisphenol A (BPA) photodegradation with PMS activation. The well-designed heterojunction with improvement of the contact area and interface microstructure was obtained through in situ growth of the Bi₂WO₆ on the surface of BiOCl. The Bi₂WO₆/BiOCl nanocomposites exhibit excellent catalytic performance in PMS activation for BPA degradation under visible light irradiation. A possible photocatalytic reaction mechanism was systematically revealed. The excellent catalytic performance is mainly attributed to the strong interaction between Bi₂WO₆ and BiOCl, resulting in an enhanced photoabsorption and a more efficient interfacial charge separation and transfer. This paper provides a novel strategy to design efficient catalytic materials for organic contaminants remediation with PMS activation.

Recent advances in graphitic carbon nitride as a catalyst for heterogeneous Fenton-like reactions

Graphitic carbon nitride (g-C₃N₄), an appealing metal-free polymer, has featured in extensive research in heterogeneous Fenton-like reactions owing to its advantages of stable chemical and thermal properties, ease of structural regulation and unique redox ability. However, there are still some gaps in the understanding of the mechanism and fate of g-C₃N₄ and its derivatives in heterogeneous Fenton reaction degradation of contaminants. This paper gives systematic emphasis to the development and progress of g-C₃N₄ and its composites as catalysts in heterogeneous Fenton-like reactions. The main synthesis strategies of g-C₃N₄ composites are discussed, including calcination, hydrothermal method and self-assembly method. Then, the key catalytic properties of g-C₃N₄ in Fenton-like applications, including anchoring nanoparticles, increasing specific surface area and exposed active surface sites, as well as regulating charge transfer reactions, are highlighted. Special emphasis is placed on its multifunctional role in heterogeneous Fenton-like reactions and the mechanisms involved in the activation of hydrogen peroxide, persulfates, and photocatalytic activation of persulfate. Lastly, the existing challenges and possible development direction of g-C₃N₄-coupling Fenton reactions are proposed. It is believed that this paper will bring useful information for the development of graphitic carbon nitride in both laboratory studies and practical applications.

Element-doped graphitic carbon nitride: confirmation of doped elements and applications

Doping is widely reported as an efficient strategy to enhance the performance of graphitic carbon nitride (g-CN). In the study of element-doped g-CN, the characterization of doped elements is an indispensable requirement, as well as a huge challenge. In this review, we summarize some useful characterization methods which can confirm the existence and chemical states of doped elements. The advantages and shortcomings of these characterization methods are discussed in detail. Various applications of element-doped g-CN and the function of doped elements are also introduced. Overall, this review article aims to provide helpful information for the research of element-doped g-CN.

Different activation methods in sulfate radical-based oxidation for organic pollutants degradation: Catalytic mechanism and toxicity assessment of degradation intermediates

With the continuous development of industrialization, a growing number of refractory organic pollutants are released into the environment. These contaminants could cause serious risks to the human health and wildlife, therefore their degradation and mineralization is very critical and urgent. Recently sulfate radical-based advanced oxidation technology has been widely applied to organic pollutants treatment due to its high efficiency and eco-friendly nature. This review comprehensively summarizes different methods for persulfate (PS) and peroxymonosulfate (PMS) activation including ultraviolet light, ultrasonic, electrochemical, heat, radiation and alkali. The reactive oxygen species identification and mechanisms of PS/PMS activation by different approaches are discussed. In addition, this paper summarized the toxicity of degradation intermediates through bioassays and Ecological Structure Activity Relationships (ECOSAR) program prediction and the formation of toxic bromated disinfection byproducts (Br-DBPs) and carcinogenic bromate (BrO₃^-) in the presence of Br^-. The detoxification and mineralization of target pollutants induced by different reactive oxygen species are also analyzed. Finally, perspectives of potential future research and applications on sulfate radical-based advanced oxidation technology in the treatment of organic pollutants are proposed.

Tetracycline hydrochloride degradation over manganese cobaltate (MnCo2O4) modified ultrathin graphitic carbon nitride (g-C3N4) nanosheet through the highly efficient activation of peroxymonosulfate under visible light irradiation

Peroxymonosulfate (PMS) activation by heterogeneous transition metal oxides is an effective approach for treating emerging pollutants in water. However, the low PMS activation efficiency associated with the valency conversion rate of transition metals has been a major challenge to sulfate radical-based oxidation. In this work, manganese cobaltate (MnCo₂O₄) nanoparticles anchored on graphitic carbon nitride (g-C₃N₄) flakes (MnCo₂O₄/g-C₃N₄) were successfully prepared and showed high PMS activation efficiency under visible (Vis) light. The obtained catalysts degraded 96.1% of the tetracycline hydrochloride (TCH) through the synergistic effect of PMS and photocatalysis. The reaction rate constant (0.2505 min^-1) was 5.3 and 1.8 times higher in the MnCo₂O₄/g-C₃N₄/PMS/Vis system than in the pristine g-C₃N₄ (0.0471 min^-1) and MnCo₂O₄ (0.1435 min^-1) systems, respectively. The characterization results verified that g-C₃N₄, which functions as the electron donor in the photocatalytic heterojunction system, could transmit numerous photogenerated electrons to MnCo₂O₄, thereby increasing the cyclability of divalent-trivalent metal ions. The composites also showed good stability, cycling capability, and cation/anion tolerance. Tentative degradation mechanism and reaction pathways were proposed based on the reactive species and degradation products.

Double photoelectron-transfer mechanism in Ag-AgCl/WO3/g-C3N4 photocatalyst with enhanced visible-light photocatalytic activity for trimethoprim degradation

Antibiotic contamination is increasing scrutinized recently. In this work, the Ag-AgCl/WO₃/g-C₃N₄ (AWC) nanocomposites were successfully synthesized using a two-step process involving electrostatic self-assembly and in-situ deposition for trimethoprim (TMP) degradation. The as-prepared photocatalysts were investigated and characterized by XRD, FTIR, XPS, TGA, SEM, TEM, UV-vis, PL and EIS. The experimental results indicated that 99.9% of TMP (4 mg/L) was degraded within 60 min when the concentration of AWC was 0.5 g/L. Reactive species scavenging experiments and electron spin resonance (ESR) experiments illustrated that superoxide radical (•O₂^-) and photogenerated holes (h⁺) were the main active species. The functional theory calculation and identification of intermediates via HPLC-MS revealed the possible degradation pathways of TMP. A double photoelectron-transfer mechanism in AWC photocatalyst was proposed. Five cycling photocatalytic tests and reactions under different solution matrix effects further supported that the AWC was a promising photocatalyst for the removal of TMP from the aquatic environment.

Graphitic Carbon Nitride-Based Composite in Advanced Oxidation Processes for Aqueous Organic Pollutants Removal: A Review

In recent decades, a growing number of organic pollutants released have raised worldwide concern. Graphitic carbon nitride (g-C3N4) has drawn increasing attention in environmental pollutants removal thanks to its unique electronic band structure and excellent physicochemical stability. This paper reviews the recent progress of g-C3N4-based composites as catalysts in various advanced oxidation processes (AOPs), including chemical, photochemical, and electrochemical AOPs. Strategies for enhancing catalytic performance such as element-doping, nanostructure design, and heterojunction construction are summarized in detail. The catalytic degradation mechanisms are also discussed briefly.

Facile Fabrication of Z-Scheme Bi2WO6/WO3 Composites for Efficient Photodegradation of Bisphenol A with Peroxymonosulfate Activation

The rational fabrication of direct Z-scheme heterostructures photocatalysts is a pivotal strategy to boost the interfacial charge migration and separation. Herein, direct Z-scheme Bi2WO6/WO3 composites were rationally fabricated for the degradation of bisphenol A combined with the activation of peroxymonosulfate (PMS). The tight interface contact between Bi2WO6 and WO3 was successfully formed by the in situ epitaxial growth of ultrathin Bi2WO6 nanosheets at the surface of WO3 nanorods. The Bi2WO6/WO3 composite presented highly efficient catalytic performance toward degradation of BPA with PMS activation as compared to the WO3 and Bi2WO6. PMS can dramatically boost the photocatalytic activity of the composites. Moreover, the results of active radical scavenging experiments revealed that h+, •O2-, and •SO4- are critical active species in the photodegradation reaction. Finally, the photocatalytic mechanism for the degradation of BPA is also discussed in detail. The great improvement of photocatalytic performance should be ascribed to the effective formation of the direct Z-scheme heterojunctions between Bi2WO6 and WO3, resulting in improved light absorption, an efficient transfer and separation of photoinduced charge carriers, and a considerable amount of the electrons and holes with strong reduction and oxidation abilities. The study might provide new inspirations to design and construct heterostructured nanomaterials with outstanding photoactivity for environmental remediation.

Enhanced reduction and oxidation capability over the CeO2/g-C3N4 hybrid through surface carboxylation: performance and mechanism

The charge separation efficiency of the CeO₂/g-C₃N₄ heterojunction was greatly enhanced through surface carboxylation of the g-C₃N₄ substrate.