Effective removal of Cd(II) from aqueous solution based on multifunctional nanoporous silicon derived from solar kerf loss waste

Reutilization of Silicon-Cutting Waste via Constructing Multilayer Si@SiO2@C Composites as Anode Materials for Li-Ion Batteries

The rapid development of the photovoltaic industry has also brought some economic losses and environmental problems due to the waste generated during silicon ingot cutting. This study introduces an effective and facile method to reutilize silicon-cutting waste by constructing a multilayer Si@SiO2@C composite for Li-ion batteries via two-step annealing. The double-layer structure of the resultant composite alleviates the severe volume changes of silicon effectively, and the surrounding slightly graphitic carbon, known for its high conductivity and mechanical strength, tightly envelops the silicon nanoflakes, facilitates ion and electron transport and maintains electrode structural integrity throughout repeated charge/discharge cycles. With an optimization of the carbon content, the initial coulombic efficiency (ICE) was improved from 53% to 84%. The refined Si@SiO2@C anode exhibits outstanding cycling stability (711.4 mAh g-1 after 500 cycles) and rate performance (973.5 mAh g-1 at 2 C). This research presents a direct and cost-efficient strategy for transforming photovoltaic silicon-cutting waste into high-energy-density lithium-ion battery (LIB) anode materials.

Nanoarchitectonics of Bimetallic MOF@Lab-Grade Flexible Filter Papers: An Approach Towards Real-Time Water Decontamination and Circular Economy

This study presents a novel approach to decontaminate ferrocyanide-contaminated wastewater. The work effectively demonstrates the use of bimetallic Mo/Zr-UiO-66 as a super-adsorbent for rapid sequestration of Prussian blue, a frequently found iron complex in cyanide-contaminated soils/groundwater. The exceptional performance of Mo/Zr-UiO-66 is attributed to the insertion of secondary metallic sites, which deliver synergistic effects, benefiting the inherent qualities of the framework. Moreover, to extend the industrial applications of metal-organic frameworks (MOFs) in real-world scenarios, an approach is delivered to structure the nanocrystalline powders into MOF-based macrostructures. The work demonstrates an interfacial process to develop continuous MOF nanostructures on ordinary laboratory-grade filter papers. The novelty of the work lies in the development of robust free-standing filtration materials to purify PB dye-contaminated water. Additionally, the work embraces a circular economy concept to address problems related to resource scarcity, excessive waste production, and maintenance of economic benefits. Consequently, the PB dye-loaded adsorbent waste is re-employed for the adsorption of heavy metals (Pb2+ and Cd2+ ). Simultaneously, the study aims to address the problems related to the real-time handling of powdered adsorbents, and the generation of ecologically harmful secondary waste, thereby, progressing toward a more sustainable system.

High-Value Utilization of Silicon Cutting Waste and Excrementum Bombycis to Synthesize Silicon-Carbon Composites as Anode Materials for Li-Ion Batteries

Silicon-based photovoltaic technology is helpful in reducing the cost of power generation; however, it suffers from economic losses and environmental pollution caused by silicon cutting waste. Herein, a hydrothermal method accompanied by heat treatment is proposed to take full advantage of the photovoltaic silicon cutting waste and biomass excrementum bombycis to fabricate flake-like porous Si@C (FP-Si@C) composite anodes for lithium-ion batteries (LIBs). The resulting FP-Si@C composite with a meso-macroporous structure can buffer the severe volume changes and facilitate electrolyte penetration. Meanwhile, the slightly graphitic carbon with high electrical conductivity and mechanical strength tightly surrounds the Si nanoflakes, which not only contributes to the ion/electron transport but also maintains the electrode structural integrity during the repeated lithiation/delithiation process. Accordingly, the synergistic effect of the unique structure of FP-Si@C composite contributes to a high discharge specific capacity of 1322 mAh g^-1 at 0.1 A g^-1, superior cycle stability with a capacity retention of 70.8% after 100 cycles, and excellent rate performance with a reversible capacity of 406 mAh g^-1 at 1.0 A g^-1. This work provides an easy and cost-effective approach to achieving the high-value application of photovoltaic silicon cutting waste, as well as obtaining high-performance Si-based anodes for LIBs.

Highly efficient Cd(Ⅱ) removal using 3D N-doped carbon derived from MOFs: Performance and mechanisms

Cadmium (Cd) removal is imperative to ensure the safety of aquatic-ecosystem, yet its effective removal technology has remained elusive by far. To address this concern, three-dimensional N-doped carbon (NC) polyhedrons affording ample porosity is fabricated based upon the thermal carbonization and KOH activation of zeolitic imidazolate framework-8 (ZIF-8) precursor. Thus-derived activated NC (a-NC) adsorbent not only overcomes the inherent instability of ZIF-8 but also harvests a maximum Cd(Ⅱ) adsorption capacity of 370.2 mg g^-1, which evidently surpasses those of bare NC counterpart as well as previously reported adsorbents. Impressively, a-NC achieves ca. 100% removal of aqueous Cd(Ⅱ) in a broad working pH range (5-9), and particularly attains stable performances (81-92%) in various realistic water. Theoretical calculations in combination with experimental characterizations further offer mechanistic insight into the enhanced removal exerted by a-NC. Notably, owing to the increased specific surface area (3041 vs. 389 m² g^-1) and enhanced sp² carbon content (91.7 vs. 68.8%) of a-NC as compared to NC, advanced Cd(Ⅱ) adsorption via a-NC can be exhibited. Our designed a-NC material harnessing favorable recycling capability would be in particular attractive in the realm of practical Cd(Ⅱ) remediation.

Efficient removal of Cd2+ from aqueous solution with a novel composite of silicon supported nano iron/aluminum/magnesium (hydr)oxides prepared from biotite

Taking low cost silicate minerals to develop efficient Cd²⁺ adsorption materials was favorable to the comprehensive utilization of minerals and remediation of environmental pollution. In this study, a composite of silicon supported nano iron/aluminum/magnesium (hydr)oxides was prepared with biotite by combining acid leaching and base precipitation process, which was used to remove Cd²⁺. Cd²⁺ adsorption behaviors were in accordance of pseudo-second order kinetic model and Langmuir model, and the obtained maximal Cd²⁺ adsorption capacity was 78.37 mg/g. Increasing pH and temperature could accelerate the removal of Cd²⁺. The activation energy was calculated as 66.05 kJ/mol, meaning that Cd²⁺ removal process was mainly depended on chemical adsorption. XRD and SEM results showed that this composite was a micro-nano structure of layered silica supported nano iron/aluminum/magnesium (hydr)oxides. Cd²⁺ removal mechanisms were consisted of surface complexation and ion exchange between Cd²⁺ and other metal ions, and the ion exchange interaction played the major role. These results indicated that a novel efficient utilization way for silicate minerals was developed.

Review of resource and recycling of silicon powder from diamond-wire sawing silicon waste

The installed capacity of solar photovoltaic power generation has grown rapidly in the last decades. With the rapid development of the photovoltaic industry, the demand for Si wafers, which are integral to solar cells, has grown dramatically. In the manufacture of Si wafers, the traditional loose abrasive sawing method (LAS) has gradually been replaced by the diamond-wire sawing method (DWS). However, during the diamond-wire wafer sawing process, approximately 35%-40% of the crystalline Si becomes diamond-wire sawing silicon waste (DSSW). Therefore, DSSW represents a resource worth recycling due to its low levels of impurities and high silicon content. Furthermore, recycling prevents DSSW from becoming environmental pollution and eliminates disposal costs. This review provides an overview of the recycling and reutilization of DSSW based on an extensive literature survey. In view of the rapid increase in DSSW production and current purification bottleneck of < 5 N, in-situ utilizations may be more feasible, such as the preparation of silicon containing alloys and functional ceramic materials, which not only frees from the complex purification process, but has a huge demand. Finally, based on the review, future prospects are proposed, aiming to identify research directions with significant potential in the resource utilization of DSSW and other silicon wastes.

Magnetic polyphenol nanocomposite of Fe3O4/SiO2/PP for Cd(II) adsorption from aqueous solution

In order to solve the water solubility and difficult re-use of plant polyphenol (PP) in Cd(II) adsorption, PP was immobilized on the surface of magnetic material in this study. A core-shell nanocomposite Fe₃O₄/SiO₂/PP (∼18 nm) was synthesized with 3-8 nm SiO₂ and 2-5 nm PP. TGA analysis revealed the PP coating amount was 2.39%. VSM detection suggested that saturation magnetization of Fe₃O₄/SiO₂/PP was 45.94 emu/g. The adsorption equilibrium was reached in 2 h and the adsorption kinetics followed a pseudo-second-order model. The adsorption data fitted well to a Langmuir isotherm, achieving a 98.6% of Cd(II) removal at 0.6 g, pH 7.0, 298 K and 160 rpm. The adsorption capacity of Cd(II) on Fe₃O₄/SiO₂/PP highly depended on the pH. The adsorption capacity increased as the initial solution pH was increased in the range of 3.0-8.0. The adsorbed Cd(II) on Fe₃O₄/SiO₂/PP could be effectively desorbed by 0.1 mol/L of HNO₃ and the Fe₃O₄/SiO₂/PP still maintained a stable adsorption capacity after five cycles. The adsorption mechanism of Cd(II) on Fe₃O₄/SiO₂/PP is mainly dependent on complexation and electrostatic adsorption from the FTIR and XPS analyses. This study provided a new way for PP to remove Cd(II) from aqueous solution.

Remediation of Pb-Contaminated Soil Using a Novel Magnetic Nanomaterial Immobilization Agent

The management of heavy metal contaminated soil has received extensive research attention. In this study, a novel immobilization agent (SiO₂@Fe₃O₄@C-COOH) was combined with traditional immobilization agents (TIAs), i.e., CaO, organic matter (OM), and calcium superphosphate (CSP), and used to remediate Pb-contaminated soil. The immobilization effects of Pb in soil was evaluated through pot experiments involving wheat cultivation. The results indicated that SiO₂@Fe₃O₄@C-COOH delivered a higher Pb immobilization efficiency than did TIAs such as CaO, OM, and CSP. The application of SiO₂@Fe₃O₄@C-COOH in combination with TIAs (CaO, OM, and CSP) synergistically enhanced the Pb immobilization efficiency of the soil to 85.10%. Further, joint application in a 54.19% reduction of Pb content in wheat roots, a 65.78% reduction in stems, and a 47.96% in leaves. Thus, the combined application of SiO₂@Fe₃O₄@C-COOH and TIAs significantly reduced the bioavailability of Pb, achieved the purpose of Pb stabilization and soil remediation, and has the potential for wide-spread application in the remediation of Pb-contaminated soils.

PSi@SiOx/Nano-Ag composite derived from silicon cutting waste as high-performance anode material for Li-ion batteries

Integration of photovoltaic (PV) power generation and energy storage has been widely believed to be the ultimate solution for future energy demands. Herein, an ingenious method was reported to make full use of photovoltaic silicon cutting waste (SiCW) natural characters fabricating PSi@SiOx/Nano-Ag composite as anode material for high-performance lithium-ion batteries. The sheet-like structure with nano/micropores and native SiOx layer addressed the volume expansion issues of Si material. Ag nanoparticles greatly enhanced electrical conductivity of composite and promoted Li⁺/e^- transport. Synergistic effect of the designed PSi@SiOx/Nano-Ag composite contributed outstanding cyclic performance with reversible capacity of 1409mAhg^-1 after 500 cycles. Notably, full LIBs with PSi@SiOx/Nano-Ag anode and commercial Li[Ni_0.6Co_0.2Mn_0.2]O₂ (NCM622) cathode delivered stable capacity of 137.5mAhg^-1 at current density of 200 mA g^-1, accompanying with a high energy density of 438 Wh kg^-1. Furthermore, electrochemical Li⁺ storage behavior of this PSi@SiOx/Nano-Ag electrode was studied, and reaction mechanism and crystal structure evolution during cycles were also revealed by in-situ XRD analysis. The synthesis method is facile and cost-effective, which paves a novel way towards high-performance Si-based anodes and promising markets for both solar photovoltaic and lithium-ion battery industries.

Removal of Cd(II) from Micro-Polluted Water by Magnetic Core-Shell Fe3O4@Prussian Blue

A novel core-shell magnetic Prussian blue-coated Fe3O4 composites (Fe3O4@PB) were designed and synthesized by in-situ replication and controlled etching of iron oxide (Fe3O4) to eliminate Cd (II) from micro-polluted water. The core-shell structure was confirmed by TEM, and the composites were characterized by XRD and FTIR. The pore diameter distribution from BET measurement revealed the micropore-dominated structure of Fe3O4@PB. The effects of adsorbents dosage, pH, and co-existing ions were investigated. Batch results revealed that the Cd (II) adsorption was very fast initially and reached equilibrium after 4 h. A pH of 6 was favorable for Cd (II) adsorption on Fe3O4@PB. The adsorption rate reached 98.78% at an initial Cd (II) concentration of 100 μg/L. The adsorption kinetics indicated that the pseudo-first-order and Elovich models could best describe the Cd (II) adsorption onto Fe3O4@PB, indicating that the sorption of Cd (II) ions on the binding sites of Fe3O4@PB was the main rate-limiting step of adsorption. The adsorption isotherm well fitted the Freundlich model with a maximum capacity of 9.25 mg·g-1 of Cd (II). The adsorption of Cd (II) on the Fe3O4@PB was affected by co-existing ions, including Cu (II), Ni (II), and Zn (II), due to the competitive effect of the co-adsorption of Cd (II) with other co-existing ions.

Efficient Photocatalytic Extraction of Uranium over Ethylenediamine Capped Cadmium Sulfide Telluride Nanobelts

The photocatalysts for hexavalent uranium (U(VI)) reduction suffered from the low uranium uptake capacity and weak long-wavelength light absorption. Herein, we synthesized the CdS_xTe_1-x nanobelts capped by ethylenediamine (EDA), which provided amino groups as the adsorption sites. With the increase of the Te content, the amino groups on the CdS_xTe_1-x nanobelts decreased because of the variation of the electron density of Cd²⁺, whereas the light adsorption was enhanced due to the narrowed bandgap. In photocatalytic reduction of U(VI), the CdS_0.95Te_0.05-EDA nanobelts exhibited a considerable U(VI) removal ratio of 97.4% with a remarkable equilibrium U(VI) extraction amount on per weight unit of the adsorbent (q_e) of 836 mg/g. The bandgap structure and Fourier transform infrared spectroscopy (FT-IR) spectra analysis revealed that the optimum photocatalytic activity of CdS_xTe_1-x nanobelts was achieved at a 5% of Te^2- doping, which balanced the factors of amino groups and bandgap. This adsorption-photoreduction process offers an ultrahigh uranium extraction capacity over wide uranium concentrations.

Efficient removal of cadmium ions from water by adsorption on a magnetic carbon aerogel

Carbon aerogels are attracting much attention as adsorbents due to their high specific surface and large accessible pores. Herein, we describe a successful synthesis of a magnetic carbon aerogel (MCA) using sodium alginate (SA) as the main carbon source, gelatin (G) as a cross-linking agent and secondary carbon source, and Fe₃O₄ nanoparticles as the magnetic component. A simple pyrolysis treatment at 550 °C under N₂ transformed a Fe₃O₄/SA/G hydrogel precursor into the MCA. The obtained magnetic carbon aerogel possessed a high specific surface area (145.7 m²/g), a hierarchically porous structure, and an abundance of surface hydroxyl (-OH) and carboxyl (-COOH) groups, resulting in outstanding sorption properties for aqueous Cd(II) (an adsorption capacity of 143.88 mg/Lmg/g). The mechanism of Cd(II) adsorption by the MCA was investigated, with the results obtained suggesting that the MCA removed cadmium ions from water by both electrostatic adsorption and complexation. Since the MCAs contained Fe₃O₄ nanoparticles, they could easily be separated and recovered from water using a magnet. This study thus identifies a promising and efficient technology for removing Cd(II) ions from aqueous solutions.