Visible light driven MoS2/α-NiMoO4 ultra-thin nanoneedle composite for efficient Staphylococcus aureus inactivation

Applying a sandwich-like strategy for dual 'light up' capture and eradication of Staphylococcus aureus using magnetically functionalized materials

In this study, we proposed an innovative application of porcine immunoglobulin G (IgG)-functionalized Fe3O4 (IgG-Fe3O4) specifically designed to target and capture Staphylococcus aureus (S. aureus). In addition, aminophenylboronic acid-modified tetraphenylethylene nanoparticles (APBA-TPE NPs) were utilized, establishing a sandwich-type dual recognition system via interactions with the bacteria's extracellular glycolipids. This approach enables highly sensitive and precise detection of bacterial presence, with a limit of detection (LOD) reaching down to 5.0 CFU/mL. Specifically, the prepared APBA-TPE NPs achieved 99.99% bacterial inactivation within 60 min at a concentration of 200 µg/mL. The results showed that APBA-TPE NPs possess a remarkable capacity for reactive oxygen species (ROS) production, which could attack the bacterial cell membrane, leading to bacterial lysis and content leakage, and ultimately to bacterial death. Furthermore, the material still showed good recoveries ranging from 88.5% to 93.5% in actual water samples, as well as a favorable sterilizing effect of killing all microorganisms for 60 min. This research provides new strategies and insights into the construction of methods for the specific capture, detection, and inactivation of S. aureus.

Enhanced photocarrier separation in Br substitution-induced [W(VI)O6-x] units for highly efficient photocatalytic nitrate reduction under alkaline conditions

Photocatalytic nitrate (NO3-) reduction is considered a promising green and non-polluting technology to solve the nitrate pollution of groundwater and surface water. Herein, a novel Br-substituted Bi2WO6-x ultrathin nanosheets were prepared by a simple hydrothermal method in a strong acid environment containing sixteen alkyl three methyl bromide (CTAB). The catalytic system solves the problems of low carrier separation efficiency, poor performance under alkaline conditions, and a hard-to-activate N = O bond, achieving efficient NO3- removal under alkaline conditions along with high N2 selectivity. It was confirmed that Br-substituted Bi2WO6-x produced the [W(VI)O6-x] units with a strong electron-withdrawing property by changing the polarity of the O-W-O bond. As a result, the effective space charge separation caused by the change of the W valence state and the spontaneous fracture behavior of the N = O bond improved the carriers utilization efficiency and distinctly reduced the reaction energy consumption, synergistically achieving excellent performance.

Recent development of metal oxides and chalcogenides as antimicrobial agents

Pathogenic microbes are a major concern in hospitals and other healthcare facilities because they affect the proper performance of medical devices, surgical devices, etc. Due to the antimicrobial resistance or multidrug resistance, combatting these microbial infections has grown to be a significant research area in science and medicine as well as a critical health concern. Antibiotic resistance is where microbes acquire and innately exhibit resistance to antimicrobial agents. Therefore, the development of materials with promising antimicrobial strategy is a necessity. Amongst other available antimicrobial agents, metal oxide and chalcogenide-based materials have shown to be promising antimicrobial agents due to their inherent antimicrobial activity as well as their ability to kill and inhibit the growth of microbes effectively. Moreover, other features including the superior efficacy, low toxicity, tunable structure, and band gap energy has makes metal oxides (i.e. TiO₂, ZnO, SnO₂ and CeO₂ in particular) and chalcogenides (Ag₂S, MoS₂, and CuS) promising candidates for antimicrobial applications as illustrated by examples discussed in this review.

Molybdenum Disulfide-Based Nanomaterials for Visible-Light-Induced Photocatalysis

Visible-light-responsive photocatalytic materials have a multitude of important applications, ranging from energy conversion and storage to industrial waste treatment. Molybdenum disulfide (MoS₂) and its variants exhibit high photocatalytic activity under irradiation by visible light as well as good stability and recyclability, which are desirable for all photocatalytic applications. MoS₂-based materials have been widely applied in various fields such as wastewater treatment, environmental remediation, and organic transformation reactions because of their excellent physicochemical properties. The present review focuses on the fundamental properties of MoS₂, recent developments and remaining challenges, and key strategies for tackling issues related to the utilization of MoS₂ in photocatalysis. The application of MoS₂-based materials in visible-light-induced catalytic reactions for the treatment of diverse kinds of pollutants including industrial, environmental, pharmaceutical, and agricultural waste are also critically discussed. The review concludes by highlighting the prospects of MoS₂ for use in various established and emerging areas of photocatalysis.

One-pot synthesis of bismuth yttrium tungstate nanosheet decorated 3D-BiOBr nanoflower heterostructure with enhanced visible light photocatalytic activity

A visible light driven BiOBr/Bi_xY_1-xWO₆ nanocomposite photocatalyst of various compositions are prepared by the addition of different amounts of KBr (0.5, 1.0, 1.5, 2.0 mmol) in Bi_xY_1-xWO₆ by a one-pot hydrothermal method. Furthermore, the photocatalytic properties of the as-prepared materials are analyzed by the decomposition of methylene blue under visible light illumination. In particular, the BiOBr/Bi_xY_1-xWO₆ nanocomposite prepared by taking 1.5 mmol of KBr present a superior photocatalytic ability (78.3%) with the rate constant value 0.016 min^-1, a low bandgap (E_g = 2.51 eV) as well as photoluminescence emission intensity than other photocatalysts prepared in this study. The radical scavenging studies revealed that OH and h⁺ performed an imperative role in the decomposition of methylene blue. Furthermore, the optimized photocatalyst is stable even after four cycles, which exposes the excellent photostability and reusability properties of the photocatalyst. In addition, a plausible mechanism of decomposition of methylene blue under visible light irradiation is also proposed.

2D Molybdenum Sulfide-Based Materials for Photo-Excited Antibacterial Application

Bacterial infections have seriously threatened human health and the abuse of natural or artificial antibiotics leads to bacterial resistance, so development of a new generation of antibacterial agents and treatment methods is urgent. 2D molybdenum sulfide (MoS₂ ) has good biocompatibility, high specific surface area to facilitate surface modification and drug loading, adjustable energy bandgap, and high near-infrared photothermal conversion efficiency (PCE), so it is often used for antibacterial application through its photothermal or photodynamic effects. This review comprehensively summarizes and discusses the fabrication processes, structural characteristics, antibacterial performance, and the corresponding mechanisms of MoS₂ -based materials as well as their representative antibacterial applications. In addition, the outlooks on the remaining challenges that should be addressed in the field of MoS₂ are also proposed.

Curcumin-Mediated Sono-Photodynamic Treatment Inactivates Listeria monocytogenes via ROS-Induced Physical Disruption and Oxidative Damage

Sono-photodynamic sterilization technology (SPDT) has become a promising non-thermal food sterilization technique because of its high penetrating power and outstanding microbicidal effects. In this study, Listeria monocytogenes (LMO) was effectively inactivated using curcumin as the sono-photosensitizer activated by ultrasound and blue LED light. The SPDT treatment at optimized conditions yielded a 4-log reduction in LMO CFU. The reactive oxygen species (ROS) production in LMO upon SPDT treatment was subsequently investigated. The results demonstrated SPDT treatment-induced excessive ROS generation led to bacterial cell deformation and membrane rupture, as revealed by the scanning electron microscope (SEM) and cytoplasmic material leakage. Moreover, agarose gel electrophoresis and SDS-PAGE further revealed that SPDT also triggered bacterial genomic DNA cleavage and protein degradation in LMO, thus inducing bacterial apoptosis-like events, such as membrane depolarization.

K+ Ion-Doped Mixed Carbon Nitride: A Daylight-Driven Photocatalyst and Luminophore for Enhanced Chemiluminescence

Photocatalytic production of reactive oxygen species from O₂ at the interface of the photocatalyst is significant to convert luminous energy like daylight into chemical energy and could be momentous for a reactive oxygen species-based chemiluminescence system. Herein, we synthesized a novel K⁺ ion-doped tri-s-triazine/triazine mixed carbon nitride (MCN), in which K⁺ ions were intercalated into the layers in a bridging manner. After a mild daylight treatment for 30 min, the MCN suspension could produce long-lifetime reactive oxygen species and further directly produce intense and stable chemiluminescence emission in the presence of luminol. In particular, the chemiluminescence intensity was 780 times that of H₂O₂-luminol, and MCN could be recycled several times in the chemiluminescence system. The mechanism results revealed a large number of reactive oxygen species that were generated from O₂ on the surface of MCN through a temperate photocatalytic process. In the theoretical calculation, the charge density of N interacting with K⁺ ions was significantly more negative than that at the corresponding position in graphitic carbon nitride, which was beneficial to the adsorption and activation of oxygen, and the narrower band gap suggested that the doping of K⁺ ions was conducive to the intramolecular charge transfer interaction. Then, the long-lifetime reactive oxygen species triggered the conversion of luminol into an excited-state intermediate, which further transferred energy to MCN, producing strong chemiluminescence emission. The K⁺ ion-doped MCN might conduct as an efficient photocatalyst for reactive oxygen species generation, recyclable catalysts, and luminophores in the photoinduced chemiluminescence system.

Construction of visible light driven silver sulfide/graphitic carbon nitride p-n heterojunction for improving photocatalytic disinfection

Compared with the Z-scheme and type-II heterojunctions, p-n type heterojunctions are more favorable for the migration of photo-induced carriers owing to the advantage of built-in electric fields. In addition, it is still of great significance to understand the carrier migration properties of the p-n heterojunction. Therefore, the development of new p-n heterojunctions and the development of high-efficiency catalysts with effective modulation of light responsiveness and rapid transfer of charge to achieve photocatalytic inactivation have attracted much attention. In this study, we synthesized a Ag₂S/g-C₃N₄ heterojunction via the in situ deposition of Ag₂S onto the g-C₃N₄ substrate. The prepared Ag₂S/g-C₃N₄ composite facilitated photo-generated charge carrier transfer and exhibited outstanding photocatalytic inactivation of bacteria compared to that of a single catalyst under visible light irradiation. In addition, the ACN-2 composites fully deactivated 7 log10 CFU/mL E. coli and 7 log10 CFU/mL S. aureus cells in 90 min under visible light. The quenching experiments confirmed that photo-generated active species (O₂^-, OH, and h⁺) were the major reactive oxygen species that contributed to the inactivation of bacteria. Energy band alignment analysis indicated that a type-II band alignment was formed in the p-n heterostructure, thereby providing strong support for the photocatalytic mechanism. This study not only provides insights into the design of p-n heterostructures, but also presents a promising strategy to enhance the photocatalytic capacities of g-C₃N₄ based materials for pathogen inactivation.

A bioinspired cercosporin/polymethylmethacrylate photocatalyst with high efficiency for decontamination of pharmaceuticals and pathogens

Pharmaceuticals have seriously contaminated aquatic environments and resulted in the formation of drug-tolerant bacteria owing to continuous release and accumulation. Therefore, the development of new methods to simultaneously decompose drugs and disinfect pathogens in an environmental-friendly manner with high efficiency is still in great demand. Bioinspired by the great photosensitivity of natural product cercosporin with the ability to efficiently generate reactive oxygen species (ROS) under natural sunlight and its antibacterial activity, here a novel cercosporin/polymethylmethacrylate (CP/PMMA) photocatalyst was rationally developed by incorporating and restricting cercosporin in a "green" macroporous resin PMMA, which greatly improved the ROS generation efficiency and displayed 97.2-100% photodegradation for broad-spectrum pharmaceuticals, including fluoroquinolones, trimethoprim and chloroquine phosphate, upon 15 W compact fluorescent lamp irradiation. More importantly, this decontamination efficiency was greatly improved, and the decontamination time was substantially shortened in a large-scale assay under natural sunlight. Furthermore, it could inactivate the pathogen Staphylococcus aureus. Overall, this work provides new insight into how a multifunctional photocatalyst could be designed using a natural product and macroporous resins for environmental remediation.

Sulfur vacancies affect the environmental fate, corona formation, and microalgae toxicity of molybdenum disulfide nanoflakes

Sulfur vacancy (SV) defects have been engineered in two-dimensional (2D) transition metal dichalcogenides (TMDs) for high performance applications in various fields involving environmental protection. Understanding the influence of SVs on the environmental fate and toxicity of TMDs is critical for evaluating their risk. Our work discovered that SVs (with S/Mo ratios of 1.65 and 1.32) reduced the dispersibility and promoted aggregation of 2H phase molybdenum disulfide (2H-MoS₂, a hot TMD) in aqueous solution. The generation capability of •O₂^- and •OH was increased and the dissolution of 2H-MoS₂ was significantly accelerated after SVs formation. Different with pristine form, S-vacant 2H-MoS₂ preferentially harvested proteins (i.e., forming protein corona) involved in antioxidation, photosynthetic electron transport, and the cytoskeleton structure of microalgae. These proteins contain a higher relative number of thiol groups, which exhibited stronger affinity to S-vacant than pristine 2H-MoS₂, as elucidated by density functional theory calculations. Notably, SVs aggravated algal growth inhibition, oxidative damage, photosynthetic efficiency and cell membrane permeability reduction induced by 2H-MoS₂ due to increased free radical yield and the specific binding of functional proteins. Our findings provide insights into the roles of SVs on the risk of MoS₂ while highlighting the importance of rational design for TMDs application.

Fighting Antibiotic Resistance in Hospital-Acquired Infections: Current State and Emerging Technologies in Disease Prevention, Diagnostics and Therapy

Rising antibiotic resistance is a global threat that is projected to cause more deaths than all cancers combined by 2050. In this review, we set to summarize the current state of antibiotic resistance, and to give an overview of the emerging technologies aimed to escape the pre-antibiotic era recurrence. We conducted a comprehensive literature survey of >150 original research and review articles indexed in the Web of Science using "antimicrobial resistance," "diagnostics," "therapeutics," "disinfection," "nosocomial infections," "ESKAPE pathogens" as key words. We discuss the impact of nosocomial infections on the spread of multi-drug resistant bacteria, give an overview over existing and developing strategies for faster diagnostics of infectious diseases, review current and novel approaches in therapy of infectious diseases, and finally discuss strategies for hospital disinfection to prevent MDR bacteria spread.

A critical review on strategies for improving efficiency of BaTiO3-based photocatalysts for wastewater treatment

Barium titanate (BaTiO₃) photocatalysts with perovskite structures are promising candidates for the effective removal of hazardous organic pollutants from water/wastewater owing to several advantages, including low cost, non-toxicity, high stability, environmental friendliness, favorable band positions, high oxygen vacancies, multiple crystal phases, rapid migration of charge carriers at the surface, band bending, spontaneous polarization, and easy tailoring of the sizes and morphologies. However, this high dielectric/ferroelectric material is only active in UV light (band gap: 3.2 eV), which reduces the photocatalytic degradation performance. To make barium titanate more suitable for photocatalysis, the surfaces of the powders can be modified to broaden the absorption band. In this paper, various strategies for improving photocatalysis of barium titanate for removing organic pollutants (mostly dyes and drugs) from water/wastewater are critically reviewed. They include modifying the sizes and morphologies of the particles by varying the reaction times and synthesis temperatures, doping with metals/non-metals, loading with noble metal NPs (Ag and Au), and fabrication of heterojunction photocatalysts (conventional type II and Z-scheme). The current challenges and possible future directions of BaTiO₃-based materials are also discussed. This comprehensive review is expected to advance the design of highly efficient BaTiO₃-based materials for photocatalytic applications in water/wastewater treatment.

A critical review on modulation of NiMoO4-based materials for photocatalytic applications

Semiconductor photocatalysis has been widely utilized to solve the problems of energy shortage and environmental pollution. Among the explored photocatalysts, nickel molybdate (NiMoO₄) has revealed many advantages for photocatalytic applications, which include visible light absorption, low cost, environment-friendly, large surface area, good electrical conductivities, and tailorable band structure. However, the recombination of photogenerated carriers, which diminishes photocatalytic efficiency, has been held as a major hurdle to the widespread application of this material. To overcome this limitation, various surface modulations such as morphology control, doping of heteroatom, deposition of noble metal nanoparticles, and fabrication of composite structures have been explored in many published studies. This article comprehensively reviews the recent progress in the modulations of NiMoO₄-based materials to improve the photocatalytic efficiency. The enhanced photocatalytic capabilities of NiMoO₄-based materials are reviewed in terms of such applications as pollutant removal, disinfection of bacteria, and water splitting. The current challenges and possible future direction of research in this field are also highlighted. This comprehensive review is expected to advance the design of highly efficient NiMoO₄-based materials for photocatalytic applications.

Shining light on transition metal sulfides: New choices as highly efficient antibacterial agents

Globally, millions of people die of microbial infection-related diseases every year. The more terrible situation is that due to the overuse of antibiotics, especially in developing countries, people are struggling to fight with the bacteria variation. The emergence of super-bacteria will be an intractable environmental and health hazard in the future unless novel bactericidal weapons are mounted. Consequently, it is critical to develop viable antibacterial approaches to sustain the prosperous development of human society. Recent researches indicate that transition metal sulfides (TMSs) represent prominent bactericidal application potential owing to the meritorious antibacterial performance, acceptable biocompatibility, high solar energy utilization efficiency, and excellent photo-to-thermal conversion characteristics, and thus, a comprehensive review on the recent advances in this area would be beneficial for the future development. In this review article, we start with the antibacterial mechanisms of TMSs to provide a preliminary understanding. Thereafter, the state-of-the-art research progresses on the strategies for TMSs materials engineering so as to promote their antibacterial properties are systematically surveyed and summarized, followed by a summary of the practical application scenarios of TMSs-based antibacterial platforms. Finally, based on the thorough survey and analysis, we emphasize the challenges and future development trends in this area.