Highly efficient conversion of the nitroarenes to amines at the interface of a ternary hybrid containing silver nanoparticles doped reduced graphene oxide/ graphitic carbon nitride under visible light

Photocatalytic Reduction of Nitrobenzene to Aniline by an Intriguing {Ru(C6H6)}-Based Heteropolytungstate

In this paper, we have successfully synthesized a structurally novel heteropolytungstate via coordination of four {Ru(C6H6)} and trivacant {TeW9O33} clusters, formulated as Cs4Na2H2[Te2W20O72(H2O){(C6H6)Ru}4]·12H2O (1). Compound 1 inherited the strong absorption of [Ru(C6H6)Cl2]2 in the visible region and {TeW9O33} in the UV region, providing a good basis for photocatalysis. As expected, compound 1 showed good photocatalytic activity in the visible-light-driven reduction of nitrobenzene using N2H4·H2O as a reductant with a yield of 99.8%, a high turnover number (TON = 330), and a high turnover frequency (TOF = 24 h-1). The cyclic experiment of nitrobenzene reduction indicated that compound 1 was an effective and stable heterogeneous catalyst. Finally, the nitrobenzene reduction pathway was affirmed using condensation with azobenzene as a reaction intermediate based on control experiments.

Enhanced photocatalytic performance of the N-rGO/g-C3N4 nanocomposite for efficient solar-driven water remediation

This paper describes the synthesis and analysis of a photocatalyst made from a combination of reduced graphene oxide (rGO) and graphitic carbon nitride (g-C3N4) through a simple hydrothermal process. The effectiveness of the N-rGO/g-C3N4 heterostructure in photocatalysis was examined by studying the breakdown of different types of organic pollutants, such as cationic and anionic dyes, as well as antibiotics, under simulated solar light irradiation. Due to the presence of Schottky junctions formed between rGO and g-C3N4, the electron transfer process is significantly enhanced, leading to a reduction in the recombination of photogenerated electrons and holes. As a result, the photocatalytic activity of the rGO/g-C3N4 photocatalyst is significantly higher compared to that of g-C3N4 alone. The photocatalytic performance was further augmented through the nitrogen doping of rGO, which led to an increase in conductivity due to electron doping and an enhancement in the charge separation process. The heterojunction of rGO/g-C3N4 with an optimum concentration of 60% rGO attained a degradation efficiency of 98.7% for rhodamine B (RhB) dye after 50 minutes of light irradiation. In comparison, the nitrogen-doped photocatalyst (N-rGO/g-C3N4) achieved a photodegradation efficiency of 99.99% within 30 minutes. The reaction rate constant of the N-rGO/g-C3N4 nanocomposite was found to be 0.11 min-1 using pseudo first-order rate kinetics. This value is about 16 times more than that of pure g-C3N4 (0.007 min-1) for the degradation of rhodamine B. Additionally, N-rGO/g-C3N4 effectively degraded various contaminants, such as methylene blue, methyl orange, and tetracycline hydrochloride. The paper also addresses the photocatalytic mechanism, which entails the facilitated movement of electrons and holes produced by light, owing to the alignment of energy bands at the interface of the N-rGO/g-C3N4 heterojunction. These findings contribute to the advancement of a metal-free and porous photocatalyst that is highly interconnected and can be used for waste water treatment and environmental remediation.

Silver-assisted reduction of nitroarenes by an Ag-embedded curcumin/melamine-functionalized magnetic nanocatalyst

In the current study, we introduce a hybrid magnetic nanocomposite comprised of curcumin (Cur), iron oxide magnetic nanoparticles (Fe₃O₄ MNPs), melamine linker (Mel), and silver nanoparticles (Ag NPs). Initially, a facile in situ route is administrated for preparing the Fe₃O₄@Cur/Mel-Ag effectual magnetic catalytic system. In addition, the advanced catalytic performance of the nanocomposite to reduce the nitrobenzene (NB) derivatives as hazardous chemical substances were assessed. Nevertheless, a high reaction yield of 98% has been achieved in short reaction times 10 min. Moreover, the Fe₃O₄@Cur/Mel-Ag magnetic nanocomposite was conveniently collected by an external magnet and recycled 5 times without a noticeable diminish in catalytic performance. Therefore, the prepared magnetic nanocomposite is a privileged substance for NB derivatives reduction since it achieved notable catalytic activity.

Methanol as a Potential Hydrogen Source for Reduction Reactions Enabled by a Commercial Pt/C Catalyst

Catalytic reduction reactions using methanol as a transfer hydrogenating agent is gaining significant attention because this simple alcohol is inexpensive and produced on a bulk scale. Herein, we report the catalytic utilization of methanol as a hydrogen source for the reduction of different functional organic compounds such as nitroarenes, olefins, and carbonyl compounds. The key to the success of this transformation is the use of a commercially available Pt/C catalyst, which enabled the transfer hydrogenation of a series of simple and functionalized nitroarenes-to-anilines, alkenes-to-alkanes, and aldehydes-to-alcohols using methanol as both the solvent and hydrogen donor. The practicability of this Pt-based protocol is showcased by demonstrating catalyst recycling and reusability as well as reaction upscaling. In addition, the Pt/C catalytic system was also adaptable for the N-methylation and N-alkylation of anilines via the borrowing hydrogen process. This work provides a simple and flexible approach to prepare a variety of value-added products from readily available methanol, Pt/C, and other starting materials.

Efficiency of zero-dimensional and two-dimensional graphene architectural nanocomposites for organic transformations in the contemporary environment: a review

Graphene derivatives-based nanocatalyst finds increasing utilisation in the catalysis field for organic transformations. Researchers have been working on the development of graphene oxide, reduced graphene oxide, and graphene quantum dots with metal or metal oxide nanocomposites over the last few years. These materials exhibit excellent electrical, catalytic, optical, thermal, and magnetic properties. In particular, GO/rGO/GQDs composites assisted by metal or metal oxides have attracted broad attention for their possible applications in organic compound synthesis, drug delivery, sensors, devices, and the related areas of the environment. In this review, we have summarised GO/rGO/GQDs-metal or metal oxide composites using catalyst for organic conversions and synthesis of organic compounds in accordance with the discussion on the key problems and prospects for future study. Furthermore, there is a significant function for the catalytic efficiency of composites assisted by metal or metal oxide nanocatalyst which is categorised by graphene derivatives bases.

Very rapid synthesis of highly efficient and biocompatible Ag2Se QD phytocatalysts using ultrasonic irradiation for aqueous/sustainable reduction of toxic nitroarenes to anilines with excellent yield/selectivity at room temperature

There are many problems associated with the synthesis of nanocatalysts and catalytic reduction of nitroarenes - e.g., high temperatures, costs, long reaction/synthesis process times, the toxicity of chemicals/solvents, undesirable byproducts, the toxic/harmful wastes, low efficiency/selectivity, etc. This study represents an attempt to overcome these challenges. To this purpose, biocompatible and highly efficient Ag₂Se quantum dots (QDs) catalysts with antibacterial activity were synthesized in a very rapid (30 sec, rt), simple, inexpensive, sustainable/green, and one-pot strategy in water using ultrasonic irradiation. Characterization of the QDs was performed using different techniques. UV-Vis absorption and fluorescence spectroscopic studies showed an absorption peak at 480-550 nm and a maximum emission peak around 675 nm, which confirmed the successful synthesis of Ag₂Se QDs via the applied biosynthetic method. Subsequently, catalytic reduction of nitroarenes by them was carried out under safe conditions (H₂O, rt, air atmosphere) in ∼ 60 min with excellent yield and selectivity (>99%). Their catalytic activity in the reduction of various toxic nitroarenes to aminoarenes under green conditions was investigated. Thus, a rapid and safe ultrasound-based method was employed to prepare stable and green Ag₂Se QDs phyto-catalysts with unique properties, including exquisite monodispersity in shape (orthorhombic) and size (∼7 nm), air-stability, and good purity and crystallinity. Importantly, instead of various toxic chemicals, the plant extract obtained by rapid ultrasonic method (10 min, rt) was used as natural reducing, capping, and stabilizing agents. Moreover, antibacterial assays results showed that Ag₂Se-QDs catalysts at low concentrations (ppm) have high activity against all tested bacteria, especially E. coli (MIC:31.25 ppm, MBC:125 ppm) which were significantly different from those of Fig extract (MIC = MBC:500 ppm). The data reflect the role of these bio-synthesized Ag₂Se-QDs catalysts in the development of versatile and very safe catalysts with biomedical properties.

A review on synergistic coexisting pollutants for efficient photocatalytic reaction in wastewater remediation

With the tremendous development of the economy and industry, the pollution of water is becoming more serious due to the excessive chemical wastes that need to remove thru reduction or oxidation reactions. Simultaneous removal of dual pollutants via photocatalytic redox reaction has been tremendously explored in the last five years due to effective decontamination of pollutants compared to a single pollutants system. In a photocatalysis mechanism, the holes in the valence band can remarkably promote the oxidation of a pollutant. At the same time, photoexcited electrons are also consumed for the reduction reaction. The synergistic between the reduction and oxidation inhibits the recombination of electron-hole pairs extending their lifetime. In this review, the binary pollutants that selectively removed via photocatalysis reduction or oxidation are classified according to heavy metal-organic pollutant (HM/OP), heavy metal-heavy metal (HM/HM) and organic-organic pollutants (OP/OP). The intrinsic between the pollutants was explained in three different mechanisms including inhibition of electron-hole recombination, ligand to metal charge transfer and electrostatic attraction. Several strategies for the enhancement of this treatment method which are designation of catalysts, pH of mixed pollutants and addition of additive were discussed. This review offers a recent perspective on the development of photocatalysis system for industrial applications.

Fast and selective reduction of nitroarenes under visible light with an earth-abundant plasmonic photocatalyst

Reduction of nitroaromatics to the corresponding amines is a key process in the fine and bulk chemicals industry to produce polymers, pharmaceuticals, agrochemicals and dyes. However, their effective and selective reduction requires high temperatures and pressurized hydrogen and involves noble metal-based catalysts. Here we report on an earth-abundant, plasmonic nano-photocatalyst, with an excellent reaction rate towards the selective hydrogenation of nitroaromatics. With solar light as the only energy input, the chalcopyrite catalyst operates through the combined action of hot holes and photothermal effects. Ultrafast laser transient absorption and light-induced electron paramagnetic resonance spectroscopies have unveiled the energy matching of the hot holes in the valence band of the catalyst with the frontier orbitals of the hydrogen and electron donor, via a transient coordination intermediate. Consequently, the reusable and sustainable copper-iron-sulfide (CuFeS₂) catalyst delivers previously unattainable turnover frequencies, even in large-scale reactions, while the cost-normalized production rate stands an order of magnitude above the state of the art.

Photocatalytic Multielectron Reduction of Nitroarenes to Anilines by Utilizing an Electron-Storable Polyoxometalate-Based Metal-Organic Framework

A powerful approach to generate photocatalysts for the highly selective reduction of nitrobenzene using light as the driving force is a combination of photosensitizers and electron-storable components in a cooperative photocatalysis fashion. Herein, a new precious metal-free photocatalyst, {ZnW-TPT}, was prepared by incorporating a Zn-substituted monovacant Keggin polyanion [SiZnW₁₁O₃₉]^6- and a photoactive organic bridging link 2,4,6-tri(4-pyridyl)-1,3,5-triazine (TPT) into a framework. In this structure, the direct coordination bond between [SiZnW₁₁O₃₉]^6- and the TPT ligand and the π-π interactions between TPT molecules help separate and migrate photogenerated carriers, which improves the photocatalytic activity of {ZnW-TPT}. The photoelectrochemical properties of {ZnW-TPT} were well studied by solid UV-vis absorption, fluorescence, transient photocurrent response, and electrochemical impedance spectroscopy tests. {ZnW-TPT} efficiently converts using hydrazine hydrate with 99% conversion and 99% selectivity for anilines under mild conditions.

Boosting the photocatalytic hydrogen production performance of graphitic carbon nitride nanosheets by tailoring the cyano groups

Graphitic carbon nitride (g-C₃N₄) is a promising visible light responsive photocatalyst for solar hydrogen production. However, pristine g-C₃N₄ suffers from severe charge recombination, resulting in a poor photocatalytic activity. Herein, a facile KOH-assisted sealed heating process is designed to tailor the electronic structure of g-C₃N₄, leading to a significantly enhanced and stable photocatalytic hydrogen production rate of 225.1 µmol h^-1 using only 50 mg of the photocatalyst. An excellent apparent quantum efficiency of 16.82% is achieved at 420 nm. Systematic studies reveal that KOH-assisted sealed heating can generate more cyano groups onto the framework of g-C₃N₄, which can increase the charge carrier density and reduce the surface charge transfer resistance, promoting charge separation and transfer. The new findings demonstrated in this work provide a facile strategy for the design of low-cost and efficient photocatalyst for solar fuel production.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Efficient reduction of nitro compounds and domino preparation of 1-substituted-1H-1,2,3,4-tetrazoles by Pd(ii)-polysalophen coated magnetite NPs as a robust versatile nanocomposite

A new, versatile, and green methodology has been developed for the efficient NaBH4-reduction of nitroarenes as well as the domino/reduction MCR preparation of 1-substituted-1H-1,2,3,4-tetrazoles using Pd(ii)-polysalophen coated magnetite NPs as an efficient heterogeneous magnetically recyclable nanocatalyst. Polysalophen was firstly prepared based on a triazine framework with a high degree of polymerization, then coordinated to Pd ions and, finally, the resulting hybrid was immobilized on magnetite NPs. The catalyst was characterized by various instrumental and analytical methods, including GPC, DLS, N2 adsorption-desorption, TGA, VSM, TEM, HRTEM, EDX, XPS, XRD, and ICP analyses. The catalyst possesses dual-functionality including the reduction of nitroarenes and the construction of tetrazole rings all in one step via a domino protocol. High to excellent yields were obtained for both nitro reduction and the direct preparation of 1-substituted-1H-1,2,3,4-tetrazoles from nitro compounds. Insight into the mechanism was conducted by XPS in situ as well as DLS in situ along with several control experiments. Recyclability of the catalyst was studied for 6 consecutive runs along with metal leaching measurements in each cycle.

Novel broad-spectrum-driven oxygen-linked band and porous defect co-modified orange carbon nitride for photodegradation of Bisphenol A and 2-Mercaptobenzothiazole

Here, we successfully synthesized the oxygen-linked band and porous defect co-modified orange carbon nitride (AF-C₃N₄) using a simple method. Further, the band structure calculation of its simulated structure is performed by DFT, which shows that the introduction of oxygen-linked band can adjust its band structure. The photocatalytic degradation rates of 0.3AF-C₃N₄ for bisphenol A and 2-mercaptobenzothiazole were 8 times and 2.73 times that of the original g-C₃N₄, respectively. Moreover, 0.3AF-C₃N₄ also shows photocatalytic activity under different wavelength light (blue, green and red light), which indicates that the synthesized materials have a broad spectrum of photocatalytic activity. Further, we proposed a possible photocatalytic degradation pathway by HPLC-MS analysis. Free radical quenching test and ESR spectra show that the generated superoxide radicals (•O₂^-), hydroxyl radicals (•OH) and holes (h⁺) cause photodegradation, while enhancing singlet oxygen (¹O₂) and weaken the content of hydrogen peroxide has further proved that active oxygen groups play an important role in the photocatalytic degradation process. Additionally, the 0.3AF-C₃N₄ can also be a photoelectrochemical sensor to detect the concentration of bisphenol A (λ ≥ 550 nm). This study provides a new strategy for the synthesis of orange carbon nitride by oxygen-linked band and porous defect co-modification for photocatalytic applications.