Enhanced heterogeneous catalytic ozonation of pharmaceutical pollutants using a novel nanostructure of iron-based mineral prepared via plasma technology: A comparative study

Metronidazole degradation mechanism by sono-photo-Fenton processes using a spinel ferrite cobalt on activated carbon catalyst

A heterogeneous catalyst was prepared by anchoring spinel cobalt ferrite nanoparticles on porous activated carbon (SCF@AC). The catalyst was tested to activate hydrogen peroxide (HP) in the Fenton degradation of metronidazole (MTZ). SCF nanoparticles were produced through the co-precipitation of iron and cobalt metal salts in an alkaline condition. Elemental mapping, physico-chemical, morphological, structural, and magnetic properties of the as-fabricated catalyst were analyzed utilizing EDX mapping, FESEM-EDS, TEM, BET, XRD, and VSM techniques. The porous structure of AC enhanced the catalytic activity of SCF by a significant decrease in the agglomeration of SCF nanoparticles. The effectiveness of SCF@AC in Fenton degradation improved substantially when UV light and ultrasound (US) irradiations were induced, most likely due to the strong synergistic effect between the catalyst and these irradiation sources. The photo-Fenton system was more efficient than the Fenton, sono-, and sono-photo-Fenton processes eliminating both MTZ and TOC. It was found that AC not only dispersed SCF nanoparticles and improved the stability of the catalyst, but also provided a high adsorption capacity of MTZ, resulting in a faster degradation. After 60 min of the photo-Fenton reaction, the elimination efficiencies of MTZ (30 mg L-1) and TOC were 97 and 42.1% under optimum operational conditions (pH = 3.0, HP = 4.0 mM, SCF@AC = 0.3 g L-1, and UV = 6 W). SCF@AC showed excellent stability with low leaching of metal ions during the reaction. Radical and non-radical (O2•-, HO•, and 1O2 species), alongside adsorption and photocatalysis mechanisms, were responsible for MTZ decontamination over the SCF@AC/HP/UV system. A comprehensive study on the HP activation mechanism and MTZ degradation pathway was obtained through scavenging tests. The findings demonstrate that SCF@AC is an effective, reusable, and environmentally sustainable catalyst for advanced oxidation processes that can effectively remove organic pollutants from wastewater. This study offers valuable insights into the feasibility of employing SCF@AC catalysts in Fenton-based processes for the degradation of MTZ.

Ferrate(VI) assists in reducing cytotoxicity and genotoxicity to mammalian cells and organic bromine formation in ozonated wastewater

Ozonation of wastewater containing bromide (Br-) forms highly toxic organic bromine. The effectiveness of ozonation in mitigating wastewater toxicity is minimal. Simultaneous application of ozone (O3) (5 mg/L) and ferrate(VI) (Fe(VI)) (10 mg-Fe/L) reduced cytotoxicity and genotoxicity towards mammalian cells by 39.8% and 71.1% (pH 7.0), respectively, when the wastewater has low levels of Br-. This enhanced reduction in toxicity can be attributed to increased production of reactive iron species Fe(IV)/Fe(V) and reactive oxygen species (•OH) that possess higher oxidizing ability. When wastewater contains 2 mg/L Br-, ozonation increased cytotoxicity and genotoxicity by 168%-180% and 150%-155%, respectively, primarily due to the formation of organic bromine. However, O3/Fe(VI) significantly (p < 0.05) suppressed both total organic bromine (TOBr), BrO3-, as well as their associated toxicity. Electron donating capacity (EDC) measurement and precursor inference using Orbitrap ultra-high resolution mass spectrometry found that Fe(IV)/Fe(V) and •OH enhanced EDC removal from precursors present in wastewater, inhibiting electrophilic substitution and electrophilic addition reactions that lead to organic bromine formation. Additionally, HOBr quenched by self-decomposition-produced H2O2 from Fe(VI) also inhibits TOBr formation along with its associated toxicity. The adsorption of Fe(III) flocs resulting from Fe(VI) decomposition contributes only minimally to reducing toxicity. Compared to ozonation alone, integration of Fe(VI) with O3 offers improved safety for treating wastewater with varying concentrations of Br-.

Synergistic effect in the structural, optical, and electrical properties of harnessing NiFe2O4/CuO nanocomposite for enhanced environmental remediation

This study presents the synthesis and characterization of composite material comprised of NiFe2O4 and CuO. The preparation of this composites involves a facile and cost-effective co-precipitation method, followed by heat treatment. The aim of this study is to explore the potential of this composite material for various catalytic applications. The synthesized NiFe2O4/CuO composites were extensively characterized using various analytical techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), impedance analyzer, UV-Visible spectroscopy (UV-Vis.), Brunner-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS). These characterizations revealed the successful formation of a nanocomposite material with a well-defined structure and identified the oxygen vacancies/defects in the samples which might result in enhanced photocatalytic efficiency. Photocatalytic activity of 0.5NiFe2O4/0.5CuO composite showed degradation of methylene blue dye by 96.15% in 120 min. This work is not only to understand the photocatalytic mechanism but also to develop effective catalysts for the degradation of harmful organic pollutants.

Construction of highly dispersed iron active sites for efficient catalytic ozonation of bisphenol A

The essential factor of catalytic ozonation technology relies on an efficient and stable catalyst. The construction of highly dispersed active sites on heterogeneous catalysts is an ideal strategy to combine the merits of homogeneous and heterogeneous catalysis with high activity and stability. Herein, an iron-containing mesoporous silica material (Fe-SBA15) with sufficient iron site exposure and enhanced intrinsic activity of active sites was employed to activate ozone for bisphenol A (BPA) degradation. Approximately 100% of BPA and 36.6% of total organic carbon (TOC) removal were realized by the Fe-SBA15 catalytic ozonation strategy with a reaction constant of 0.076 min-1, well beyond the performance of FeOx/SBA15 mixture and Fe2O3. Radical quenching experiments and electron paramagnetic resonance (EPR) analysis demonstrated that the hydroxyl radicals (HO•) and superoxide radicals (O2•-) played an important role in the degradation process. The iron sites with recyclable Fe(III)/Fe(II) pairs act as both the electron donors and active sites for catalytic ozonation. The mesoporous framework of SBA15 in Fe-SBA15 stabilizes the iron sites that enhance its stability. With high catalytic performance and high reusability for catalytic ozonation of BPA, the Fe-SBA15 is expected to be a promising catalyst in catalytic ozonation for wastewater treatment.

Evaluation of the photodegradation activity of bismuth oxoiodide/bismuth sub-carbonate nanocatalyst: Experimental design and the mechanism study

In this study, a binary BiOI/(BiO)2CO3 catalyst was prepared and used for sulfasalazine (SSZ) photodegradation in an aqueous phase. The semiconductors were identified by XRD, SEM-EDX, and UV-Vis diffuse reflectance spectroscopy (DRS) methods. Applying the Kubelka-Munk model on DRS results, the band gap energies of 2.09, 3.5, and 2.07 eV were obtained for BiOI, (BiO)2CO3, and BiOI/(BiO)2CO3 samples. pHpzc values of 6.3, 10.1, and 8.1 were estimated for BiOI, (BiO)2CO3, and BiOI/(BiO)2CO3, respectively. After observing the boosted photocatalytic activity by the coupled system, the interaction effects of the influencing variables in SSZ photodegradation were evaluated via the response surface methodology (RSM) approach. The optimal RSM-run conditions were 8.5 ppm SSZ at pH 8, which contained 0.28 g/L of the BiOI/(BiO)2CO3 catalyst and 29 min illumination time, resulting in 87% SSZ photodegradation. The effects of some scavenging agents were also studied to elucidate the relative roles of the reactive species in the SSZ photodegradation by the proposed catalyst, that is, hydroxyl radicals ∼ photoinduced electrons > superoxide radicals ∼ photoinduced holes. The proposed catalyst retained good activity after 5 successive reusing runs.

Heterogeneous Catalytic Ozonation: Solution pH and Initial Concentration of Pollutants as Two Important Factors for the Removal of Micropollutants from Water

There are several publications on heterogeneous catalytic ozonation; however, their conclusions and the comparisons between them are not always consistent due to the variety of applied experimental conditions and the different solid materials used as catalysts. This review attempts to limit the major influencing factors in order to reach more vigorous conclusions. Particularly, it highlights two specific factors/parameters as the most important for the evaluation and comparison of heterogeneous catalytic ozonation processes, i.e., (1) the pH value of the solution and (2) the initial concentration of the (micro-)pollutants. Based on these, the role of Point of Zero Charge (PZC), which concerns the respective solid materials/catalysts in the decomposition of ozone towards the production of oxidative radicals, is highlighted. The discussed observations indicate that for the pH range 6–8 and when the initial organic pollutants’ concentrations are around 1 mg/L (or even lower, i.e., micropollutant), then heterogeneous catalytic ozonation follows a radical mechanism, whereas the applied solid materials show their highest catalytic activity under their neutral charge. Furthermore, carbons are considered as a rather controversial group of catalysts for this process due to their possible instability under intense ozone oxidizing conditions.

Highly stable and efficient calcined γ-Al2O3 catalysts loaded with MnOx-CeOx for the ozonation of oxytetracycline

Catalytic ozonation with supported metal oxides is a promising strategy for addressing refractory pollutants in wastewater. In this study, γ-Al2O3 supported MnOx-CeOx catalysts (MC1, MC2, and MC3) obtained at different calcination temperatures (400 °C, 550 °C, and 700 °C) were applied as effective catalysts for ozonation and explored the feasibility of the treatment of oxytetracycline (OTC) wastewater. Comparatively, the MC2 possessed the highest molar ratios of Mn3+/Mn4+ (1.60) and Ce3+/Ce4+ (0.96), the largest surface area (273.8 m2 g-1) with a petal-shaped structure, and most abundant surface hydroxyls (3.78 mmol g-1). These physicochemical characteristics benefited the surface reaction and resulted in the acceleration of ozone decomposition, electron transfer, and •OH generation, thereby improving the catalyst's adsorption ability and catalytic activity. The combination with MC2 increased the OTC and COD removal of the ozonation process from 59.1% and 29.0% to 94.7% and 83.3% in 25 min, respectively. By employing electron paramagnetic resonance (EPR) and radical quenching experiments, it was verified that •OH species generation promoted the mineralization of OTC. The possible degradation pathways of OTC were investigated through mass spectrometry, and the route consisted of dehydration, deamination, and demethylation. Moreover, during a 12-day continuous experiment, MC2 catalyst exhibited excellent reusability and catalytic stability, with COD removal efficiencies above 80%.

Antiviral drugs against influenza: Treatment methods, environmental risk assessment and analytical determination

Over the past few years, antiviral drugs against influenza are considered emerging contaminants since they cause environmental toxicity even at low concentrations. They have been found in environmental matrices all around the world, showing that conventional treatment methods fail to remove them from water and wastewater. In addition, the metabolites and transformation products of these drugs can be more persistent than original in the environment. Several techniques to degrade/remove antiviral drugs against influenza have been investigated to prevent this contamination. In this study, the characteristics of antiviral drugs against influenza, their measurement by analytical methods, and their removal in both water and wastewater treatment plants (WWTPs) were presented. Different treatment methods, such as traditional procedures (biological processes, filtration, coagulation, flocculation, and sedimentation), advanced oxidation processes (AOPs), adsorption and combined methods, were assessed. Ecotoxicological effects of both the antiviral drug and its metabolites as well as the transformation products formed as a result of treatment were evaluated. In addition, future perspectives for improving the removal of antiviral drugs against influenza, their metabolites and transformation products were further discussed. The research indicated that the main tested techniques in this study were ozonation, photolysis and photocatalysis. Combined methods, particularly those that use renewable energy and waste materials, appear to be the optimum approach for the treatment of effluents containing antiviral drugs against influenza. In light of high concentrations or probable antiviral resistance, this comprehensive assessment suggests that antiviral drug monitoring is required, and some of those substances may cause toxicological effects.

Recent Progress of Natural Mineral Materials in Environmental Remediation

Organic contaminants, volatile organic compounds (VOCs), and heavy metals have posed long-term threats to the ecosystem and human health. Natural minerals have aroused widespread interest in the field of environmental remediation due to their unique characteristics such as rich resources, environmentally benign, and excellent photoelectric properties. This review briefly introduced the contributions of natural minerals such as sulfide minerals, oxide minerals, and oxysalt minerals in pollution control, which include organic pollution degradation, sterilization, air purification (NO VOCs oxidation), and heavy metal treatment by means of photocatalysis, Fenton catalysis, persulfate activation, and adsorption process. At last, the future challenges of natural mineral materials in pollution control are also outlooked.

Catalytic ozonation of antibiotics by using Mg(OH)2 nanosheet with dot-sheet hierarchical structure as novel nanoconfined catalyst

Antibiotic pollution has caused important concern for international and national sustainability. Catalytic ozonation is a quick and efficient technique to remove contaminants in aquatic environment. This study firstly developed a nanosheet-growth technique for synthesizing Li-doped Mg(OH)₂ with dot-sheet hierarchical structure as catalyst to ozonize antibiotics. Metronidazole could be totally removed through ozonation catalyzed by Li-doped Mg(OH)₂ in 10 min. Approximately 97% of metronidazole was eliminated in 10 min even the catalyst was used for 4 times. Reaction rate constant of Li-doped Mg(OH)₂ treatment was about 3.45 times that of nano-Mg(OH)₂ treatment, illustrating that the dot-sheet hierarchical structure of Li-doped Mg(OH)₂ exhibited nano-confinement effect on the catalytic ozonation. Approximately 70.4% of metronidazole was mineralized by catalytic ozonation using Li-doped Mg(OH)₂. Temperature of 25 °C was more suitable for catalytic ozonation of metronidazole by Li-doped Mg(OH)₂. Ions generally inhibited the catalytic ozonation of metronidazole while only 0.005 mol L^-1 of Cl^- slightly enhanced the ozonation rate, illustrating complicated mechanisms existed for ozonation of metronidazole catalyzed by Li-doped Mg(OH)₂. The possible mechanisms of the ozonation of metronidazole using Li-doped Mg(OH)₂ included direct ozonation and ozonation catalyzed by radical ·O₂^-, reactive oxygen species ¹O₂ and intermediate (H₂O₂). The synthesized Mg(OH)₂ nanosheet with dot-sheet hierarchical structure is a novel nanoconfined material with excellent reusability and catalytic performance.

Challenges and pitfalls in the investigation of the catalytic ozonation mechanism: A critical review

Catalytic ozonation is a promising technology for pollutant abatement in water and wastewater treatment. However, there are many controversies and contradictions regarding the mechanisms of catalytic ozonation in literature, which has seriously confounded the development of the technology towards industrial applications. Herein, a critical review of literature is conducted to reveal possible underlying causes of the controversies and contradictions, and several common pitfalls in the experimental design and data interpretation are identified, e.g., the fundamentally flawed quenching method popularly used for evaluating the role of reactive oxygen species for pollutant abatement in catalytic ozonation and the neglect of monitoring ozone transfer doses in lab-scale experiments. Based on the identified pitfalls, several measures are suggested to improve the experimental design and data interpretation of catalytic ozonation studies. In addition, recent advances in mechanistic understanding of catalytic ozonation by principle-based modelling approaches are described. Finally, additional works that are needed to shrink the gap between academic research and practical applications and the prospect of catalytic ozonation in future water and wastewater treatment systems are analyzed.

Clay, Zeolite and Oxide Minerals: Natural Catalytic Materials for the Ozonation of Organic Pollutants

Ozone has been successfully employed in water treatment due to its ability to oxidize a wide variety of refractory compounds. In order to increase the process efficiency and optimize its economy, the implementation of heterogeneous catalysts has been encouraged. In this context, the use of cheap and widely available natural materials is a promising option that would promote the utilization of ozone in a cost-effective water treatment process. This review describes the use of natural clays, zeolites and oxides as supports or active catalysts in the ozonation process, with emphasis on the structural characteristics and modifications performed in the raw natural materials; the catalytic oxidation mechanism; effect of the operating parameters and degradation efficiency outcomes. According to the information compiled, more research in realistic scenarios is needed (i.e., real wastewater matrix or continuous operation in pilot scale) in order to transfer this technology to the treatment of real wastewater streams.

In-situ growth of Co/Ni bimetallic organic frameworks on carbon spheres with catalytic ozonation performance for removal of bio-treated coking wastewater

The Co/Ni-MOFs@CS composite derived from Co/Ni bimetallic organic framework was synthesized and characterized. Compared with a single O₃ system, the synergy between carbon sphere (CS) and metal organic frameworks (MOFs) improved the electron transfer efficiency and the formation rate of •OH. The coexistence of Co and Ni in various valence states might accelerate the cyclic process of Co(II)/Co(III) and Ni(II)/Ni(III), thereby improving the catalytic activity. Taking levofloxacin as a model pollutant, the mechanism of catalytic process was discussed, and the catalytic reaction was successfully applied to the removal of residual organics in bio-treated coking wastewater (BTCW). The removal rates of chemical oxygen demand (COD) and total organic carbon (TOC) in 60 min were 50.85%-53.71% and 39.98%-43.48%. From the perspective of UV absorption and 3D EEM, catalytic ozonation was more conducive to breaking the electronic protection of inert organic molecules such as heterocyclic compounds, and achieving higher efficiency of mineralization. It provides a new idea for catalytic ozonation technology of wastewater treatment in the future from theory, technology and application.

Advanced catalytic ozonation for degradation of pharmaceutical pollutants-A review

Various chemical treatment techniques are involved in removing refractory organic compounds from water and wastewater using the oxidation reaction of hydroxyl radicals (^•OH). The use of catalysts in advanced catalytic ozonation is likely to improve the decomposition of molecular ozone to generate highly active free radicals that facilitate the rapid and efficient mineralization and degradation of numerous organics. For the degradation of toxic organic pollutants in wastewater, the advanced catalytic ozonation process has been widely applied in recent years. Low utilization efficiency of ozone and ineffective mineralization of organic contaminants by ozone can be remedied with advanced catalytic ozonation. Advanced catalytic ozonation has gained popularity because of these merits. However, homogeneous catalytic ozonation has the disadvantage of producing secondary contaminants from the addition of metallic ions. Heterogeneous catalytic ozonation can overcome this drawback by utilizing metals, metallic oxides, and carbon materials as a catalyst of efficacy and stability. This review discusses various aspects of catalytic ozonation in wastewater treatment of pharmaceutical pollutants, application of catalytic ozonation process in typical wastewater, and prospects in advancing the techniques in heterogeneous catalytic ozonation.

Mechanism of catalytic ozonation for elimination of methyldopa with Fe3 O4 @SiO2 @CeO2 catalyst

In this study, a magnetic nanocatalyst (Fe₃ O₄ @SiO₂ @CeO₂ ) was prepared and applied in the catalytic ozonation of methyldopa (MD). The effects of operational parameters on catalytic ozonation performance were investigated, including ozone dosage, catalyst dosage, initial MD concentration, and pH. The removal of MD was 45.2% in ozonation, whereas the efficiency was achieved to 83.0% with the addition of Fe₃ O₄ @SiO₂ @CeO₂ . The results showed that Fe₃ O₄ @SiO₂ @CeO₂ could significantly improve the catalytic ozonation performance. And the enhanced mechanism study showed that it was attributed to promotion of ozone decomposition to generate hydroxyl radical. The reaction model was explored, and the reaction rates were calculated for the MD degradation in catalytic ozonation. A higher degradation efficiency of MD in catalytic ozonation was attributed to the enhanced surface effect of the catalysts, which was confirmed by using TBA, PO₄ ^3- , and p-BQ as scavengers of hydroxyl radical, surface reaction, and superoxide radical. The hydroxyl radical and superoxide radical played an important role in the degradation of MD. The mechanism of catalytic ozonation by Fe₃ O₄ @SiO₂ @CeO₂ was discussed via X-ray photoelectron spectroscopy (XPS) spectra and experimental data.

Defect-Engineered Graphene Films as Ozonation Catalysts for the Devastation of Sulfamethoxazole: Insights into the Active Sites and Oxidation Mechanism

Graphene-based catalysts have been widely applied for catalytic ozonation. However, as it is difficult to obtain graphene with high structural precision, it is currently unfeasible to comprehend the relationships between the intrinsic structure of the layered carbon catalysts with its catalytic activities. Here, an advanced plasma-assisted etch strategy was used to fine tune the ozonation activity of monolayered graphene films by tailoring the defect types. Raman mapping indicated that the defects of the as-prepared monolayered graphene films were predominantly sp3, vacancy, and boundary-type defects, respectively. The roles and contributions of these active defects in manipulating the oxidative potential of monolayered graphene films were revealed by quenching experiments, electron paramagnetic resonance results, and density functional theory calculations. The catalytic results showed that the monolayered graphene films with boundary-like defects exhibited the best catalytic performance toward the degradation of sulfamethoxazole. This work contributes new insights into the design of high-efficiency carbonaceous catalysts by structuring additional defective sites.

Efficient oxidation/mineralization of pharmaceutical pollutants using a novel Iron (III) oxyhydroxide nanostructure prepared via plasma technology: Experimental, modeling and DFT studies

High-performance novel iron oxyhydroxide (limonite) nanostructure, with improved surface reactive sites, was prepared via one-pot, eco-friendly, free precursor and cold glow discharge N₂-plasma technique. Natural and plasma treated (PTNL/N₂) limonite samples were characterized by FESEM, XPS, XRD, FTIR, AAS, EDX, BET/BJH and pH_pzc to confirm the successful synthesis. Central composite design (CCD) and artificial neural network (ANN, topology of 4:8:1) methods were utilized to study the oxidation/mineralization of phenazopyridine (PhP) as a hazardous contaminant by heterogeneous catalytic ozonation process (HCOP). The obtained results indicated that PTNL/N₂ had the highest catalytic performance in PhP degradation (98.6% in 40 min) and mineralization (80.4% in 120 min). The degradation mechanism in different processes was investigated by dissolved ozone concentration, various organic scavengers (BQ and TBA) and inorganic salts (NaNO₃, NaCl, Na₂CO₃ and NaH₂PO₄). Moreover, reusability-stability, Fe and nitrogen (NO₃^- and NH₄⁺) ions release were assessed during different AOPs. Furthermore, toxicity tests indicated that the HCOP using PTNL/N₂ was able to detoxify the PhP solutions efficiently. Finally, Density Functional Theory (DFT) studies were employed to introduce the most plausible contaminant degradation pathway, reactive sites and byproducts. This research provided a new insight into the improvement of wastewater treatment studies by a combination of experiment and computer simulation.

A novel high rotation bubble reactor for the treatment of a model pollutant in ozone/goethite/H2O2 and UV/goethite coupled processes

This work proposes a novel approach for the coupling of ozonation and Fenton processes using a new prototype of a high rotation bubble reactor (HRBR), which improves utilization of the ozone and hydrogen peroxide through bubble generation and axial and radial dispersion of the flow. The HRBR integrates the rotor and the diffuser in the same device facilitating the generation and dispersion of the ozone bubbles inside the reaction tank. Thus, the mass transfer to the liquid phase is enhanced. Most of the experiments were carried out under neutral pH and 1580 rpm of agitation during the 20 min of reaction. Total ibuprofen degradation was achieved within 20 min of operation for most of the couplings and individual processes evaluated. It was successfully demonstrated that the HRBR can be used as a reactive system for heterogeneous Fenton and ozonation coupling because it presents a high synergy. For the ozonation process, the reactor also displayed a good performance because the residual ozone in the gas is lower than 0.4 mg/L, which indicates that there is a suitable ozone utilization. Ibuprofen degradation by other processes like oxidation direct by H₂O₂ and heterogeneous Fenton was 28.0% and 73.1%, respectively. It was determined that the reaction rate, synergy, OUI (ozone utilized index), and consumption of electrical energy (EE/O) of the coupled processes could be improved by using the HRBR depending on the experimental conditions.

Which is Better for Nanomedicines: Nanocatalysts or Single-Atom Catalysts?

With the rapid advancements in nanotechnology and materials science, numerous nanomaterials have been used as catalysts for nanomedical applications. Their design and modification according to the microenvironment of diseases have been shown to achieve effective treatment. Chemists are in pursuit of nanocatalysts that are more efficient, controllable, and less toxic by developing innovative synthetic technologies and improving existing ones. Recently, single-atom catalysts (SACs) with excellent catalytic activity and high selectivity have attracted increasing attention because of their accurate design as nanomaterials at the atomic level, thereby highlighting their potential for nanomedical applications. In this review, the recent advances in nanocatalysts and SACs are briefly summarized according to their synthesis, characterizations, catalytic mechanisms, and nanomedical applications. The opportunities and future scope for their development and the issues and challenges for their application as nanomedicine are also discussed. As far as it is known, the review is the systematic comparison of nanocatalysts and SACs, especially in the field of nanomedicine, which has promoted the development of nanocatalytic medicine.

Removal of Pharmaceutical Residues from Water and Wastewater Using Dielectric Barrier Discharge Methods-A Review

Persistent pharmaceutical pollutants (PPPs) have been identified as potential endocrine disruptors that mimic growth hormones when consumed at nanogram per litre to microgram per litre concentrations. Their occurrence in potable water remains a great threat to human health. Different conventional technologies developed for their removal from wastewater have failed to achieve complete mineralisation. Advanced oxidation technologies such as dielectric barrier discharges (DBDs) based on free radical mechanisms have been identified to completely decompose PPPs. Due to the existence of pharmaceuticals as mixtures in wastewater and the recalcitrance of their degradation intermediate by-products, no single advanced oxidation technology has been able to eliminate pharmaceutical xenobiotics. This review paper provides an update on the sources, occurrence, and types of pharmaceuticals in wastewater by emphasising different DBD configurations previously and currently utilised for pharmaceuticals degradation under different experimental conditions. The performance of the DBD geometries was evaluated considering various factors including treatment time, initial concentration, half-life time, degradation efficiency and the energy yield (G50) required to degrade half of the pollutant concentration. The review showed that the efficacy of the DBD systems on the removal of pharmaceutical compounds depends not only on these parameters but also on the nature/type of the pollutant.

Synthesis, molecular dynamics simulation and adsorption study of different pollutants on functionalized mesosilica

Experimental and computational works were carried out on a new type of mesoporous silica. In the experimental section, functionalized hollow mesosilica spheres were prepared via a facile technique and then evaluated using some analytical techniques (FESEM, TEM, L-XRD, FTIR, BET-BJH, and TGA). The obtained results revealed that the synthesized material had hollow structure with a diamino-grafted porous shell. The molecular separation of crystal Violet (CV) and neutral Red (NR) dyes from water were investigated by adsorption process using the synthesized powder. Influence of adsorbent loading was evaluated as adsorption ability and dyes removal efficiency. Also, the obtained modeling results revealed appropriate fitting of data with non-linear Langmuir model. The theoretical studies were employed to study the adsorption and removal mechanism of cationic (CV and NR) and anionic (orange II (OII)) dyes using molecular dynamics calculations. Moreover, the simulation outcomes provided valuable information about quantum chemical properties including the HOMO-LUMO maps, chemical reactivity, global softness (σ) and hardness (η) for silica-linker-water-dyes components.

High performance ozone based advanced oxidation processes catalyzed with novel argon plasma treated iron oxyhydroxide hydrate for phenazopyridine degradation

The present study has focused on the degradation of phenazopyridine (PhP) as an emerging contaminant through catalytic ozonation by novel plasma treated natural limonite (FeOOH·xH₂O, NL) under argon atmosphere (PTL/Ar). The physical and chemical characteristics of samples were evaluated with different analyses. The obtained results demonstrated higher surface area for PTL/Ar and negligible change in crystal structure, compared to NL. It was found that the synergistic effect between ozone and PTL/Ar nanocatalyst was led to highest PhP degradation efficiency. The kinetic study confirmed the pseudo-first-order reaction for the PhP degradation processes included adsorption, peroxone and ozonation, catalytic ozonation with NL and PTL/Ar. Long term application (6 cycles) confirmed the high stability of the PTL/Ar. Moreover, different organic and inorganic salts as well as the dissolved ozone concentration demonstrated the predominant role of hydroxyl radicals and superoxide radicals in PhP degradation by catalytic Ozonation using PTL/Ar. The main produced intermediates during PhP oxidation by PTL/Ar catalytic ozonation were identified using LC–(+ESI)–MS technique. Finally, the negligible iron leaching, higher mineralization rate, lower electrical energy consumption and excellent catalytic activity of PTL/Ar samples demonstrate the superior application of non-thermal plasma for treatment of NL.

Application of Mineral Iron-Based Natural Catalysts in Electro-Fenton Process: A Comparative Study

The potential use of novel iron based mineral catalysts as an effective and available material for electrocatalytic oxidation of refractory contaminants by heterogeneous electro-Fenton (HEF) process was studied for the first time. For this purpose, four natural catalysts, namely ilmenite (FeTiO3), pyrite (FeS2), chromite (FeCr2O4), and chalcopyrite (CuFeS2) were selected as the source of ferrous iron (Fe2+) ions. The catalyst samples were appropriately characterized by X-ray diffraction (XRD) and RAMAN analysis. The degradation kinetics and mineralization rate of 0.2 mM antibiotic cefazolin (CFZ), as a contaminant of emerging concern, were comparatively investigated by HEF using the catalysts mentioned above. The effect of important experimental parameters such as catalysts loading and current on the process efficiency was investigated. Moreover, the performance of these new mineral catalysts was compared in term of CFZ degradation kinetics, mineralization power, mineralization current efficiency and electrical energy consumption. A greater enhancement in degradation/mineralization of CFZ was obtained when using chalcopyrite as the catalyst in HEF. The stability and reusability experiments demonstrated negligible decrease in catalytic activity of chalcopyrite after five consecutive runs. Besides, the rate constant for CFZ oxidation by hydroxyl radicals was estimated according the pseudo-first-order reaction kinetics. The empirical assessment, in addition to economic evaluation, confirmed that iron based mineral catalysts and specifically chalcopyrite could be an appropriate and cost-effective alternative catalyst for HEF due to its high catalytic activity, availability, eco-friendly nature and low energy consumption compared to other synthesized catalysts.

Ti-pillared montmorillonite clay for adsorptive removal of amoxicillin, imipramine, diclofenac-sodium, and paracetamol from water

The adsorptive removal of natural montmorillonite (MMT) clay pillared with titanium oxide (Ti-PILC) was examined in this study to see the adsorptive remove of pharmaceutical compounds (PCs): amoxicillin (AMOX), imipramine (IMP), Diclofenac-Sodium (DIF-S), and paracetamol (PCM) from water under a batch-scale study. The post-intercalation changes in clay were investigated with various surface and structural analysis techniques. The results confirm an increase in the surface area, microporosity, and acidic sites (lewis acid) which improved and regulates Ti-PILC interactions with electron-rich PPCPs molecules. The FTIR bands for Si-OH and Al-OH show a shift in MMT, after pillaring, indicates the intercalation of Ti pillared in its interlayer space. The isotherms studies suggested the best fitting of Redlich Peterson models for all pharmaceutical adsorption data. The Langmuir adsorption (maximum) was recorded for Ti-PILC in the order: 82.68 (IMP) > 23.05 (DIF-S) > 20.83 (PCM) > 4.26 (AMOX) mg.g^-1 at a fixed adsorbent dose i.e. 0.1 g·L^-1. The PCs adsorption kinetics was also evaluated by Pseudo-first-, and second-order model and results showed the best curve fitting for all PCs. Results of regeneration studies showed that modified Ti-PILC could be a low-cost cleaner material for adsorption of pharmaceuticals from water.

Photocatalytic Advanced Oxidation Processes for Water Treatment: Recent Advances and Perspective

Nowadays, an ever-increasing variety of organic contaminants in water has caused hazards to the ecological environment and human health. Many of them are persistent and non-biodegradable. Various techniques have been studied for sewage treatment, including biological, physical and chemical methods. Photocatalytic advanced oxidation processes (AOPs) have received increasing attention due to their fast reaction rates and strong oxidation capability, low cost compared with the non-photolytic AOPs. This review is dedicated to summarizing up-to-date research progress in photocatalytic AOPs, such as Fenton or Fenton-like reaction, ozonation and sulfate radical-based advanced oxidation processes. Mechanisms and activation processes are discussed. Then, the paper summarizes photocatalytic materials and modification strategies, including defect chemistry, morphology control, heterostructure design, noble metal deposition. The future perspectives and challenges are also discussed.

Degradation of sulfonamide antibiotics using ozone-based advanced oxidation process: Experimental, modeling, transformation mechanism and DFT study

In this research, degradation of three sulfonamide antibiotic compounds (SNAs) such as Sulfasalazine (SSZ), Sulfamethoxazole (SMX) and Sulfamethazine (SMT) as well as Metronidazole (MNZ) were investigated for the first time using experimental, modeling and simulation data under O₃, H₂O₂, and O₃/H₂O₂ systems. The kinetic and synergistic study confirmed the pseudo-first-order reaction and highest performance of the O₃/H₂O₂ process for the SNAs degradation process. Two modeling approach, central composite design (CCD) based on response surface methodology (RSM) and artificial neural network (ANN) were utilized to investigate the optimization and modeling of SSZ degradation as the response of O₃/H₂O₂ system and results were compared. The individual and interactive effects of main operational parameters were also possessed by the main effect graphs, contour and response surface plots. The experimental results showed maximum degradation efficiency at the optimum condition for SSZ, SMX, SMT and MNZ were 98.10%, 89.34%, 86.29% and 58.70%, respectively in O₃/H₂O₂ process. For proposed reaction mechanism of SNAs in O₃/H₂O₂ process the influence of inorganic salts including Na₂SO₄, NaH₂PO₄, Na₂CO₃, NaCl and tert butanol (TBA) as organic OH scavenger was studied. Besides that, LC-MS/MS analysis and DFT calculation were employed to identify the intermediate molecules produced (31 species) during the SSZ degradation (as a SNAs model) and a probable degradation pathway was proposed. The results provided a new strategy by combination of experiment and computer simulation to evaluate the O₃/H₂O₂ system for optimization of SNAs removal from wastewater.