1
|
Pedrosa MFF. An overview of bio-cellulose derived materials for catalytic water treatment. Int J Biol Macromol 2024; 258:128789. [PMID: 38096936 DOI: 10.1016/j.ijbiomac.2023.128789] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/19/2023] [Revised: 12/04/2023] [Accepted: 12/12/2023] [Indexed: 12/24/2023]
Abstract
Bio-cellulose derived materials (BCM) exhibit distinct structural and morphologic properties, which make them suitable for catalytic environmental remediation. In the domain of water treatment, the prospects for BCM remain bright, offering new possibilities for the development of advanced materials with low environmental impact. Research on BCM as catalysts or catalyst immobilization platforms for water treatment is still limited, mostly using laboratory-grown biomaterials for the photocatalytic degradation of dyes. BCM production costs can be significant, which can hinder its application. Thus, cost-effective alternatives using waste materials as substrates for BCM culture media are highly desirable to optimize production, while also decreasing food waste. Moreover, advances in biotechnology can enhance BCM production, tailoring its properties to meet specific requirements. Hybrid catalytic BCM composites can be easily developed, due to the straightforward functionalization of the biomaterial's network, promoting the efficiency of a variety of catalytic systems. Still considering the intrinsic features of the biomaterial, membrane development and application pose as an opportunity for continuous flow evaluations, facilitating long-term usage and reusability. Nevertheless, there are still challenges regarding catalytic BCM for water treatment (i.e., cost-effectiveness, scaling up, and consistent performance in diverse treatment scenarios). Addressing these aspects can lead to innovative environmental remediation options.
Collapse
Affiliation(s)
- Marta F F Pedrosa
- LSRE-LCM - Laboratory of Separation and Reaction Engineering - Laboratory of Catalysis and Materials, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal; ALiCE - Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal.
| |
Collapse
|
2
|
Matei E, Șăulean AA, Râpă M, Constandache A, Predescu AM, Coman G, Berbecaru AC, Predescu C. ZnO nanostructured matrix as nexus catalysts for the removal of emerging pollutants. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:114779-114821. [PMID: 37919505 PMCID: PMC10682326 DOI: 10.1007/s11356-023-30713-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/02/2023] [Accepted: 10/23/2023] [Indexed: 11/04/2023]
Abstract
Water pollution stands as a pressing global environmental concern, elevating the significance of innovative, dependable, and sustainable solutions. This study represents an extensive review of the use of photocatalytic zinc oxide nanoparticles (ZnO NPs) for the removal of emerging pollutants from water and wastewater. The study examines ZnO NPs' different preparation methods, including physical, chemical, and green synthesis, and emphasizes on advantages, disadvantages, preparation factors, and investigation methods for the structural and morphological properties. ZnO NPs demonstrate remarkable properties as photocatalysts; however, their small dimensions pose an issue, leading to potential post-use environmental losses. A strategy to overcome this challenge is scaling up ZnO NP matrices for enhanced stability and efficiency. The paper introduces novel ZnO NP composites, by incorporating supports like carbon and clay that serve as photocatalysts in the removal of emerging pollutants from water and wastewater. In essence, this research underscores the urgency of finding innovative, efficient, and eco-friendly solutions for the removal of emerging pollutants from wastewater and highlights the high removal efficiencies obtained when using ZnO NPs obtained from green synthesis as a photocatalyst. Future research should be developed on the cost-benefit analysis regarding the preparation methods, treatment processes, and value-added product regeneration efficiency.
Collapse
Affiliation(s)
- Ecaterina Matei
- Faculty of Materials Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, 060042, Bucharest, Romania
| | - Anca Andreea Șăulean
- Faculty of Materials Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, 060042, Bucharest, Romania.
| | - Maria Râpă
- Faculty of Materials Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, 060042, Bucharest, Romania
| | - Alexandra Constandache
- Faculty of Biotechnical Systems Engineering, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, 060042, Bucharest, Romania
| | - Andra Mihaela Predescu
- Faculty of Materials Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, 060042, Bucharest, Romania
| | - George Coman
- Faculty of Materials Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, 060042, Bucharest, Romania
| | - Andrei Constantin Berbecaru
- Faculty of Materials Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, 060042, Bucharest, Romania
| | - Cristian Predescu
- Faculty of Materials Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, 313 Splaiul Independentei, 060042, Bucharest, Romania
| |
Collapse
|
3
|
Photocatalytic degradation of the organophosphorus insecticide chlorpyrifos in aqueous suspensions using a novel activated carbon ZrO2-ZnO nanocomposite under UV light. KOREAN J CHEM ENG 2023. [DOI: 10.1007/s11814-022-1354-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/16/2023]
|
4
|
Zhu N, Zhou S, Zhang C, Fu Z, Gong J, Zhou Z, Wang X, Lyu P, Li L, Xia L. Metal–Organic Frameworks Meet Metallic Oxide on Carbon Fiber: Synergistic Effect for Enhanced Photodegradation of Antibiotic Pollutant. Int J Mol Sci 2022; 23:ijms231911286. [PMID: 36232587 PMCID: PMC9569748 DOI: 10.3390/ijms231911286] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2022] [Revised: 09/18/2022] [Accepted: 09/19/2022] [Indexed: 11/23/2022] Open
Abstract
Photodegradation shows a potential strategy for alleviating the excessive antibiotics crisis. The synergistic effect of various metal compounds immobilized on conductive substrates has been considered for wastewater treatment. However, developing a facile and universal approach for rational design and enhancing photocatalytic properties has endured extreme challenges. Herein, we develop a strategy to facilitate the photocatalytic reactions by designing a composite architecture of ZIF–8 ligand binding to the in–situ synthesis ZnO seed layer on carbon fiber. In this architecture, the dissolution and release of the seed layer in the excessive 2–Methylimidazole methanol solution were used as the binder to enhance the interplay between organic ligand and substrate. As an evaluated system for antibiotic contaminants, the photodegradation of tetracycline hydrochloride was performed with a removal efficiency of 88.47% (TC = 50 mg/L, pH = 4, 0.08 g of photocatalyst, illumination within 100 min). Moreover, the photocatalyst exhibited a steady photocatalytic activity (75.0%) after five cycles. The present work demonstrated a strategy for enhancing the photocatalytic performances of carbon fiber and accordingly provided useful perception into the design of the synergistic structure.
Collapse
Affiliation(s)
- Na Zhu
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China
| | - Sijie Zhou
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China
- College of Textiles, Donghua University, Shanghai 201620, China
| | - Chunhua Zhang
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China
- Correspondence: (C.Z.); (L.X.)
| | - Zhuan Fu
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China
| | - Junyao Gong
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China
| | - Zhaozixuan Zhou
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China
| | - Xiaofeng Wang
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China
| | - Pei Lyu
- Institute for Frontier Materials, Deakin University, Geelong, VIC 3216, Australia
| | - Li Li
- Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hong Kong 999077, China
| | - Liangjun Xia
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China
- Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hong Kong 999077, China
- Correspondence: (C.Z.); (L.X.)
| |
Collapse
|
5
|
Chen X, Xu X, Jia X, Qian H, Zhu X. Surface and interface engineering of Z-scheme 1D/2D imprinted CoZn-LDH/C3N4 nanorods for boosting selective visible-light photocatalytic activity. ADV POWDER TECHNOL 2022. [DOI: 10.1016/j.apt.2022.103531] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
|
6
|
Li P, Wang H, Ni Y, Song Y, Sun M, Gong T, Li C, Zhu X. Unraveling the six stages of the current-time curve and the bilayer nanotubes obtained by one-step anodization of Zr. NANOSCALE ADVANCES 2022; 4:582-589. [PMID: 36132686 PMCID: PMC9419485 DOI: 10.1039/d1na00692d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/18/2021] [Accepted: 12/05/2021] [Indexed: 06/16/2023]
Abstract
The application and growth mechanism of anodic TiO2 nanotubes have been a hot topic in the last ten years, but the formation mechanism of anodic ZrO2 nanotubes has rarely been studied. In one-step constant voltage anodization of Al and Ti, the typical current-time curve has three stages. Moreover, the current-time curves of the three stages can last for 10 min or even 10 hours, resulting in a single layer of nanotubes with the same diameter due to the constant voltage in one-step anodization. However, in this paper, it was found for the first time that the three stages of the current-time curve appeared twice in succession during one-step constant voltage anodization of Zr for only 900 seconds, and bilayer nanotubes with increased diameter were obtained. This six-stage current-time curve cannot be explained by classical field-assisted dissolution and field-assisted flow or stress-driven mechanisms. Here, the formation mechanism and growth kinetics of bilayer ZrO2 nanotubes have been clarified rationally by the theories of ionic current, electronic current and oxygen bubble mold. The interesting results presented in this paper are of great significance for revealing the anodizing process of various metals and the formation mechanism of porous structures.
Collapse
Affiliation(s)
- Pengze Li
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Heng Wang
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Yilin Ni
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Ye Song
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Ming Sun
- School of Electronic and Optical Engineering, Nanjing University of Science and Technology Nanjing 210094 China
| | - Tianle Gong
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Chengyuan Li
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Xufei Zhu
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| |
Collapse
|
7
|
Zhang Z, Niu M, Li W, Ding C, Xie P, Li Y, Chen L, Lan X, Liu C, Yan X, Fu X, Liu Y, Liu Y, Cao D, Dai J, Hong X, Liu C. Steered polymorphic nanodomains in TiO 2 to boost visible-light photocatalytic oxidation. RSC Adv 2022; 12:9660-9670. [PMID: 35424931 PMCID: PMC8959444 DOI: 10.1039/d2ra00782g] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/06/2022] [Accepted: 03/18/2022] [Indexed: 11/21/2022] Open
Abstract
A breakthrough in enhancing visible-light photocatalysis of wide-bandgap semiconductors such as prototypical titania (TiO2) via cocatalyst decoration is still challenged by insufficient heterojunctions and inevitable interfacial transport issues. Herein, we report a novel TiO2-based composite material composed of in situ generated polymorphic nanodomains including carbon nitride (C3N4) and (001)/(101)-faceted anatase nanocrystals. The introduction of ultrafine C3N4 results in the generation of many oxygen vacancies in the TiO2 lattice, and simultaneously induces the exposure and growth of anatase TiO2(001) facets with high surface energy. The photocatalytic performance of C3N4-induced TiO2 for degradation of 2,4-dichlorophenol under visible-light irradiation was tested, its apparent rate being up to 1.49 × 10−2 min−1, almost 3.8 times as high as that for the pure TiO2 nanofibers. More significantly, even under low operation temperature and after a long-term photocatalytic process, the composite still exhibits exceptional degradation efficiency and stability. The normalized degradation efficiency and effective lifespan of the composite photocatalyst are far superior to other reported modified photocatalysts. A novel TiO2-based composite material composed of in situ generated biomimetic polymorphic nanodomains including carbon nitride (C3N4) and (001)-/(101)-faceted anatase nanocrystals is reported.![]()
Collapse
Affiliation(s)
- Zeju Zhang
- State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Biochemical Engineering, The Affiliated Qingdao Central Hospital of Qingdao University, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China
| | - Mang Niu
- State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Biochemical Engineering, The Affiliated Qingdao Central Hospital of Qingdao University, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China
| | - Wei Li
- State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Biochemical Engineering, The Affiliated Qingdao Central Hospital of Qingdao University, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China
| | - Chenfeng Ding
- Energy Materials and Surface Sciences Unit (EMSSU), Okinawa Institute of Science and Technology Graduate University (OIST), 1919-1 Tancha Kunigami-gun, Onna-son, Okinawa 904-0495, Japan
- Foshan (Southern China) Institute for New Materials, Foshan 528200, China
| | - Peitao Xie
- State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Biochemical Engineering, The Affiliated Qingdao Central Hospital of Qingdao University, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China
| | - Yongxin Li
- State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Biochemical Engineering, The Affiliated Qingdao Central Hospital of Qingdao University, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China
| | - Lili Chen
- State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Biochemical Engineering, The Affiliated Qingdao Central Hospital of Qingdao University, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China
| | - Xiaopeng Lan
- State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Biochemical Engineering, The Affiliated Qingdao Central Hospital of Qingdao University, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China
| | - Chunlei Liu
- State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Biochemical Engineering, The Affiliated Qingdao Central Hospital of Qingdao University, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China
| | - Xiaodong Yan
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, China
| | - Xuewei Fu
- College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu 610065, Sichuan, China
| | - Yaochun Liu
- Foshan (Southern China) Institute for New Materials, Foshan 528200, China
| | - Yuan Liu
- State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Biochemical Engineering, The Affiliated Qingdao Central Hospital of Qingdao University, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China
- Foshan (Southern China) Institute for New Materials, Foshan 528200, China
| | - Dapeng Cao
- Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| | - Jingjie Dai
- School of Mechanical and Electronic Engineering, Qingdao Binhai University, Qingdao 266555, Shandong, China
| | - Xiaofen Hong
- Zhejiang Rich Environmental Protection Technology Co., Ltd, Hangzhou 310000, China
| | - Chunzhao Liu
- State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Biochemical Engineering, The Affiliated Qingdao Central Hospital of Qingdao University, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China
| |
Collapse
|
8
|
Liu X, Xiao Y, Zhang Z, You Z, Li J, Ma D, Li B. Recent Progress in
Metal‐Organic
Frameworks@Cellulose Hybrids and Their Applications. CHINESE J CHEM 2021. [DOI: 10.1002/cjoc.202100534] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
Affiliation(s)
- Xiongli Liu
- School of Materials Science and Engineering, National Institute for Advanced Materials, TKL of Metal and Molecule‐Based Material Chemistry Nankai University Tianjin 300350 China
| | - Yun Xiao
- General English Department, College of Foreign Languages Nankai University Tianjin 300071 China
| | - Zhiyuan Zhang
- School of Materials Science and Engineering, National Institute for Advanced Materials, TKL of Metal and Molecule‐Based Material Chemistry Nankai University Tianjin 300350 China
| | - Zifeng You
- School of Materials Science and Engineering, National Institute for Advanced Materials, TKL of Metal and Molecule‐Based Material Chemistry Nankai University Tianjin 300350 China
| | - Jinli Li
- School of Materials Science and Engineering, National Institute for Advanced Materials, TKL of Metal and Molecule‐Based Material Chemistry Nankai University Tianjin 300350 China
| | - Dingxuan Ma
- College of Chemistry and Molecular Engineering, Laboratory of Eco‐chemical Engineering, Ministry of Education Qingdao University of Science and Technology Qingdao 266042 China
| | - Baiyan Li
- School of Materials Science and Engineering, National Institute for Advanced Materials, TKL of Metal and Molecule‐Based Material Chemistry Nankai University Tianjin 300350 China
| |
Collapse
|
9
|
Li P, Wang J, Liu L, Ma J, Ni Y, Wang H, Song Y. The effect of atmospheric pressure on the growth rate of TiO2 nanotubes: Evidence against the field-assisted dissolution theory. Electrochem commun 2021. [DOI: 10.1016/j.elecom.2021.107146] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022] Open
|
10
|
Ge J, Sun Y, Chen W, Song F, Xie Y, Zheng Y, Rao P. Z-scheme heterojunction based on NiWO 4/WO 3 microspheres with enhanced photocatalytic performance under visible light. Dalton Trans 2021; 50:13801-13814. [PMID: 34518857 DOI: 10.1039/d1dt02558a] [Citation(s) in RCA: 20] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The green treatment of dye wastewater has always been a research hotspot in the environmental field. The photocatalytic technology is considered to be a simple and effective strategy to remove dyes in wastewater. A new type of NiWO4/WO3 Z-scheme heterojunction microspheres were synthesized by a simple hydrothermal method and impregnation-calcination process. The crystal structure, microscopic morphology, optical and electrochemical properties of the samples were systematically characterized. The photocatalytic activity of methylene blue (MB) was studied by visible light irradiation. The results show that the direct Z-scheme heterojunction formed by NiWO4/WO3 effectively reduces the transfer resistance of photogenerated carriers and improves the separation efficiency of photogenerated carriers. The degradation rates of NiWO4/WO3-4 Z-scheme heterojunction microspheres to MB dye are 1.8 and 3.2 times higher than that of pure WO3·2H2O and WO3 microspheres, respectively. Combined with the Mott-Schottky curve and the active species capture experiments, a possible Z-scheme photogenerated carrier transfer mechanism is proposed. This study provides a method for the development and design of Z-scheme heterojunction photocatalysts in the field of wastewater purification.
Collapse
Affiliation(s)
- Jianhua Ge
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
| | - Yangang Sun
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
| | - Weiwei Chen
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
| | - Fengge Song
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
| | - Yu Xie
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
| | - Yuanyuan Zheng
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
| | - Pinhua Rao
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
| |
Collapse
|
11
|
Gong T, Li C, Li X, Yue H, Zhu X, Zhao Z, Lv R, Zhu J. Evidence of oxygen bubbles forming nanotube embryos in porous anodic oxides. NANOSCALE ADVANCES 2021; 3:4659-4668. [PMID: 36134301 PMCID: PMC9417053 DOI: 10.1039/d1na00389e] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/26/2021] [Accepted: 06/23/2021] [Indexed: 05/17/2023]
Abstract
Anodic TiO2 nanotubes have been studied widely for two decades because of their regular tubular structures and extensive applications. However, the formation mechanism of anodic TiO2 nanotubes remains unclear, because it is difficult to find convincing evidence for popular field-assisted dissolution or field-assisted injection theories and the oxygen bubble model. Here, in a bid to find direct evidence that oxygen bubbles form nanotube embryos, a new method is applied to handle this challenge. Before nanotube formation, a dense cover layer was formed to make nanotubes grow more slowly. Many completely enclosed nanotube embryos formed by oxygen bubbles were found beneath the dense cover layer for the first time. The formation of these enclosed and hollow gourd-shaped embryos is convincing enough to prove that the nanotubes are formed by the oxygen bubble mold, similar to inflating a football, rather than by field-assisted dissolution. Based on the 'oxygen bubble model' and ionic current and electronic current theories, the formation and growth process of nanotube embryos is explained clearly for the first time. These interesting findings indicate that the 'oxygen bubble model' and ionic current and electronic current theories also apply to anodization of other metals.
Collapse
Affiliation(s)
- Tianle Gong
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Chengyuan Li
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Xin Li
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Hangyu Yue
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Xufei Zhu
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Ziyu Zhao
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Renquan Lv
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| | - Junwu Zhu
- Key Laboratory of Soft Chemistry and Functional Materials of Education Ministry, Nanjing University of Science and Technology Nanjing 210094 China
| |
Collapse
|
12
|
Debunking the formation mechanism of nanopores in four kinds of electrolytes without fluoride ion. Electrochem commun 2021. [DOI: 10.1016/j.elecom.2021.107093] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022] Open
|
13
|
Liu F, Chen C, Qian J. Film-like bacterial cellulose/cyclodextrin oligomer composites with controllable structure for the removal of various persistent organic pollutants from water. JOURNAL OF HAZARDOUS MATERIALS 2021; 405:124122. [PMID: 33092885 DOI: 10.1016/j.jhazmat.2020.124122] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/08/2020] [Revised: 09/24/2020] [Accepted: 09/25/2020] [Indexed: 06/11/2023]
Abstract
The adsorptive removal of persistent organic pollutants (POPs) is reckoned as a simple, convenient, and practical technology, especially in decentralized systems and remote areas. For this purpose, it is important to design new adsorbents, with controllable structure and convenient shape, for the highly efficient removal of POPs. In this study, we describe a strategy for film-like water purifier, prepared by loading cyclodextrin (CD) oligomer onto the ultrafine nanofibers of 3D bacterial cellulose. The optimum product exhibits remarkable removal ability toward various target pollutants such as phenol, bisphenol A (BPA), glyphosate and 2,4-Dichlorophenol (2,4-DCP), with capacities higher than most adsorbents including porous carbon based materials reported previously. Moreover, our sample demonstrated stable adsorption ability over a broad pH range and under more complex water conditions, and more importantly excellent reusability. A rough cost analysis highlights the commercial potential of our sample. We reckon our study provides new insight for the design of adsorbent with high yet stable adsorption ability and controllable structure. Furthermore, the product can be used to treat actual sewage with its convenient film-like shape and excellent performance, which improves its potential in complex systems and large-scale applications.
Collapse
Affiliation(s)
- Fei Liu
- Jiangsu Key Laboratory of Chemical Pollution Control and Resources Reuse, School of Environmental and Biological Engineering, Nanjing University of Science and Technology, 200 Xiao Ling Wei, Nanjing 210094, China
| | - Chuntao Chen
- School of Chemical Engineering, Nanjing University of Science and Technology, 200 Xiao Ling Wei, Nanjing 210094, China
| | - Jieshu Qian
- Jiangsu Key Laboratory of Chemical Pollution Control and Resources Reuse, School of Environmental and Biological Engineering, Nanjing University of Science and Technology, 200 Xiao Ling Wei, Nanjing 210094, China.
| |
Collapse
|
14
|
Wei Z, Li W, Hu J, Ma X, Zhu Y. Interfacial internal electric field and oxygen vacancies synergistically enhance photocatalytic performance of bismuth oxychloride. JOURNAL OF HAZARDOUS MATERIALS 2021; 402:123470. [PMID: 32712364 DOI: 10.1016/j.jhazmat.2020.123470] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/13/2020] [Revised: 06/25/2020] [Accepted: 07/10/2020] [Indexed: 06/11/2023]
Abstract
Solar-to-chemical energy conversion is valuable and sustainable strategy for energy and environmental crisis through photocatalysis. The amorphous SnOx modified BiOCl (Sn-BiOCl) full-spectrum-responsive catalysts were designed and synthesized through solvothermal method. The introduced Sn regulates the growth of BiOCl to form ultrathin nanosheets with surface oxygen vacancies. And the surface modification of SnOx induces interfacial internal electric field via charge redistribution on the interface of BiOCl and SnOx to accelerate the photogenerated charge separation. The modification of SnOx decreased work function of Sn-BiOCl and thus elevated its conduction band and valence band simultaneously, leading enhanced photocatalytic reducibility with the improved generation rate of ·O2-. The surface SnOx and oxygen vacancies of Sn-BiOCl broadened light absorption range and enhanced photocatalytic performance synergistically, resulting in 14-fold increased photodegradation rate of phenol compared with pure BiOCl under full spectrum. This method is also able to expand to other metal ions (such as Fe3+, In3+ and Sb3+). This work provides a valuable concept in structure regulating for enhanced photocatalytic performance in the removal of organic pollutants by interfacial internal electric field and surface oxygen vacancies.
Collapse
Affiliation(s)
- Zhen Wei
- Department of Chemistry, Tsinghua University, Beijing, 100084, PR China
| | - Wenlu Li
- Department of Chemistry, Tsinghua University, Beijing, 100084, PR China
| | - Jisong Hu
- School of Science, Hubei University of Technology, Wuhan, 430068, PR China
| | - Xinguo Ma
- School of Science, Hubei University of Technology, Wuhan, 430068, PR China
| | - Yongfa Zhu
- Department of Chemistry, Tsinghua University, Beijing, 100084, PR China.
| |
Collapse
|
15
|
Wajima T, Nakaminami H, Aoki S, Seyama S, Noguchi N. [Evaluation of the Antimicrobial Effects of a Novel Visible Light-driven Photocatalyst in Vitro and in the Environment]. YAKUGAKU ZASSHI 2021; 141:135-142. [PMID: 33390440 DOI: 10.1248/yakushi.20-00171] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
Environmental microorganisms can cause several infections in humans, especially in compromised hosts. Since there are many compromised hosts in a hospital setting, it is important to control environmental pathogens in such scenarios. To disinfect the environment, photocatalysts that produce reactive oxygen in response to light have attracted attention. In the present study, the effects of a visible-light-driven antimicrobial photocatalyst, silver (I) iodide and benzalkonium complex, on bacteria, viruses, and fungi were evaluated in vitro. In addition, uncoated panels and panels coated with the photocatalyst were set up at 11 points in a university campus for 6 months, and the adherent bacteria and fungi were measured. Bacteria, bacterial spores, viruses, and fungi were completely inactivated within 45 min on the photocatalyst-coated surface exposed to approximately 700-lux fluorescent light. In the university setting, there were fewer viable adherent bacteria and fungi on the coated plates. Our findings indicate that the silver (I) iodide and benzalkonium complex photocatalyst can decrease environmental bacteria in vitro and in actual environmental settings, and thus highlight its potential in controlling and disinfecting environmental pathogens.
Collapse
Affiliation(s)
- Takeaki Wajima
- Department of Microbiology, School of Pharmacy, Tokyo University of Pharmacy and Life Sciences
| | - Hidemasa Nakaminami
- Department of Microbiology, School of Pharmacy, Tokyo University of Pharmacy and Life Sciences
| | - Sae Aoki
- Department of Microbiology, School of Pharmacy, Tokyo University of Pharmacy and Life Sciences
| | - Shoji Seyama
- Department of Microbiology, School of Pharmacy, Tokyo University of Pharmacy and Life Sciences
| | - Norihisa Noguchi
- Department of Microbiology, School of Pharmacy, Tokyo University of Pharmacy and Life Sciences
| |
Collapse
|
16
|
Lian Q, Roy A, Kizilkaya O, Gang DD, Holmes W, Zappi ME, Zhang X, Yao H. Uniform Mesoporous Amorphous Cobalt-Inherent Silicon Oxide as a Highly Active Heterogeneous Catalyst in the Activation of Peroxymonosulfate for Rapid Oxidation of 2,4-Dichlorophenol: The Important Role of Inherent Cobalt in the Catalytic Mechanism. ACS APPLIED MATERIALS & INTERFACES 2020; 12:57190-57206. [PMID: 33291883 DOI: 10.1021/acsami.0c20341] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Amorphous cobalt-inherent silicon oxide (Co-SiOx) was synthesized for the first time and employed as a highly active catalyst in the activation of peroxymonosulfate (PMS) for the rapid oxidation of 2,4-dichlorophenol (2,4-DCP). The characterization results revealed that the 0.15Co-SiOx possessed a high specific surface area of 607.95 m2/g with a uniform mesoporous structure (24.33 nm). The X-ray diffraction patterns indicate that the substituted cobalt atoms enlarge the unit cell parameter of the original SiO2, and the selected area electron diffraction pattern confirmed the amorphous nature of Co-SiOx. More bulk oxygen vacancies (Ov) existing in the Co-SiOx were identified to be one of the primary contributors to the significantly enhanced catalytic activation of PMS. The cobalt substitution both creates and stabilizes the surficial Ov and forms the adequately active Co(II)-Ov pairs which engine the electron transfer process during the catalytic activities. The active Co(II)-Ov pairs weaken the average electronegativity of Co/Si and Co/O sites, resulting in the prevalent changes in final state energy, which is the main driving cause of the binding energy shifts in the X-ray photoelectron spectroscopy (XPS) spectra of Si and O among all samples. The increase of the relative proportion of Co(III) in the spent Co-SiOx probably causes the binding energy shifts of the Co XPS spectrum compared to that of the Co-SiOx. The amorphous Co-SiOx outperforms stable and quick 2,4-DCP degradation, achieving a much higher kinetic rate of 0.7139 min-1 at pH = 7.02 than others via sulfate radical advanced oxidation processes (AOPs), photo-Fenton AOPs, H2O2 reagent AOPs, and other AOP approaches. The efficient degradation performance makes the amorphous Co-SiOx as a promising catalyst in removing 2,4-DCP or organic-rich pollutants.
Collapse
Affiliation(s)
- Qiyu Lian
- Department of Civil Engineering, University of Louisiana at Lafayette, P.O. Box 43598, Lafayette, Louisiana 70504, United States
- Center for Environmental Technology, The Energy Institute of Louisiana, P.O. Box 43597, Lafayette, Louisiana 70504, United States
| | - Amitava Roy
- The J. Bennett Johnston, Sr., Center for Advanced Microstructures and Devices (CAMD), Baton Rouge, Louisiana 70806, United States
| | - Orhan Kizilkaya
- The J. Bennett Johnston, Sr., Center for Advanced Microstructures and Devices (CAMD), Baton Rouge, Louisiana 70806, United States
| | - Daniel Dianchen Gang
- Department of Civil Engineering, University of Louisiana at Lafayette, P.O. Box 43598, Lafayette, Louisiana 70504, United States
- Center for Environmental Technology, The Energy Institute of Louisiana, P.O. Box 43597, Lafayette, Louisiana 70504, United States
| | - William Holmes
- Center for Environmental Technology, The Energy Institute of Louisiana, P.O. Box 43597, Lafayette, Louisiana 70504, United States
- Department of Chemical Engineering, University of Louisiana at Lafayette, P.O. Box 43675, Lafayette, Louisiana 70504, United States
| | - Mark E Zappi
- Department of Civil Engineering, University of Louisiana at Lafayette, P.O. Box 43598, Lafayette, Louisiana 70504, United States
- Center for Environmental Technology, The Energy Institute of Louisiana, P.O. Box 43597, Lafayette, Louisiana 70504, United States
- Department of Chemical Engineering, University of Louisiana at Lafayette, P.O. Box 43675, Lafayette, Louisiana 70504, United States
| | - Xu Zhang
- Beijing International Scientific and Technological Cooperation Base of Water Pollution Control Techniques for Antibiotics and Resistance Genes, School of Civil Engineering, Beijing Jiaotong University, 3 Shangyuancun, Beijing 100044, P. R. China
| | - Hong Yao
- Beijing International Scientific and Technological Cooperation Base of Water Pollution Control Techniques for Antibiotics and Resistance Genes, School of Civil Engineering, Beijing Jiaotong University, 3 Shangyuancun, Beijing 100044, P. R. China
| |
Collapse
|
17
|
Liu H, Wang C, Wang G. Photocatalytic Advanced Oxidation Processes for Water Treatment: Recent Advances and Perspective. Chem Asian J 2020; 15:3239-3253. [PMID: 32860468 DOI: 10.1002/asia.202000895] [Citation(s) in RCA: 63] [Impact Index Per Article: 15.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/30/2020] [Revised: 08/28/2020] [Indexed: 11/10/2022]
Abstract
Nowadays, an ever-increasing variety of organic contaminants in water has caused hazards to the ecological environment and human health. Many of them are persistent and non-biodegradable. Various techniques have been studied for sewage treatment, including biological, physical and chemical methods. Photocatalytic advanced oxidation processes (AOPs) have received increasing attention due to their fast reaction rates and strong oxidation capability, low cost compared with the non-photolytic AOPs. This review is dedicated to summarizing up-to-date research progress in photocatalytic AOPs, such as Fenton or Fenton-like reaction, ozonation and sulfate radical-based advanced oxidation processes. Mechanisms and activation processes are discussed. Then, the paper summarizes photocatalytic materials and modification strategies, including defect chemistry, morphology control, heterostructure design, noble metal deposition. The future perspectives and challenges are also discussed.
Collapse
Affiliation(s)
- Hang Liu
- The College of Chemistry and Chemical Engineering, Yangzhou University, 180 Si-Wang-Ting Road, Yangzhou, 225002, P. R. China
| | - Chengyin Wang
- The College of Chemistry and Chemical Engineering, Yangzhou University, 180 Si-Wang-Ting Road, Yangzhou, 225002, P. R. China
| | - Guoxiu Wang
- School of Mathematical and Physical Sciences, University of Technology Sydney City Campus, Broadway, Sydney, NSW 2007, Australia
| |
Collapse
|