Superhydrophilic and highly elastic monolithic sponge for efficient solar-driven radioactive wastewater treatment under one sun

Cesium adsorption from an aqueous medium for environmental remediation: A comprehensive analysis of adsorbents, sources, factors, models, challenges, and opportunities

Considering the widespread and indispensable nature of nuclear energy for future power generation, there is a concurrent increase in the discharge of radioactive Cs into water streams. Recent studies have demonstrated that adsorption is crucial in removing Cs from wastewater for environmental remediation. However, the existing literature lacks comprehensive studies on various adsorption methods, the capacities or efficiencies of adsorbents, influencing factors, isotherm and kinetic models of the Cs adsorption process. A bibliometric and comprehensive analysis was conducted using 1179 publications from the Web of Science Core Collection spanning from 2014 to 2023. It reviews and summarizes current publication trends, active countries, adsorption methods, adsorption capacities or efficiencies of adsorbents, tested water sources, influencing factors, isotherm, and kinetic models of Cs adsorption. The selection of suitable adsorbents and operating parameters is identified as a crucial factor. Over the past decade, due to their notable capacity for Cs adsorption, considerable research has focused on novel adsorbents, such as Prussian blue, graphene oxide, hydrogel, and nanoadsorbents (NA). However, there remains a need for further development of application-oriented laboratory-scale experiments. Future research directions should encompass exploring adsorption mechanisms, developing new adsorbents or their combinations, practical applications of lab-scale studies, and recycling radioactive Cs from wastewater. Drawing upon this literature review, we present the most recent research patterns concerning adsorbents to remove Cs, outline potential avenues for future research, and delineate the obstacles hindering effective adsorption. This comprehensive bibliometric review provides valuable insights into prevalent research focal points and emerging trends, serving as a helpful resource for researchers and policymakers seeking to understand the dynamics of adsorbents for Cs removal from water.

An all-in-one FeOx-rGO sponge fabricated by solid-phase microwave thermal shock for water evaporation and purification

Developing high-efficiency photothermal seawater desalination devices is of significant importance in addressing the shortage of freshwater. Despite much effort made into photothermal materials, there is an urgent need to design a rapidly synthesized photothermal evaporator for the comprehensive purification of complex seawater. Therefore, we report on all-in-one FeOx-rGO photothermal sponges synthesized via solid-phase microwave thermal shock. The narrow band gap of the semiconductor material Fe3O4 greatly reduces the recombination of electron-hole pairs, enhancing non-radiative relaxation light absorption. The abundant π orbitals in rGO promote electron excitation and thermal vibration between the lattices. Control of the surface hydrophilicity and hydrophobicity promotes salt resistance while simultaneously achieving the purification of various complex polluted waters. The optimized GFM-3 sponge exhibitedan enhanced photothermal conversion rate of 97.3% and a water evaporation rate of 2.04 kg/(m2·hr), showing promising synergistic water purification properties. These findings provide a highly efficient photothermal sponge for practical applicationsof seawater desalination and purification,as well as develop a super-rapid processing methodology for evaporation devices.

UV-blocking and photocatalytic properties of Ag-coated cotton fabrics with Si binders for photo-degradation of recalcitrant dyes in aqueous solutions under sunlight

Textile wastewater laden with dyes has emerged as a source of water pollution. This possesses a challenge in its effective treatment using a single functional material. In respond to this technological constraint, this work presents multifunctional cotton fabrics (CFs) within a single, streamlined preparation process. This approach utilizes the adherence of Ag NPs (nanoparticles) using Si binder on the surface of CFs, resulting in Ag-coated CFs through a pad dry method. The prepared samples were characterized using scanning electron microscope-energy dispersive X-ray electroscopy (SEM-EDS), thermal gravimetric analysis (TGA), Fourier transformation infrared (FT-IR). It was found that the FT-IR spectra of Ag NPs-coated CFs had peaks appear at 3400, 2900, and 1200 cm-1, implying the stretching vibrations of O-H, C-H, and C-O, respectively. Based on the EDX analysis, the presence of C, O, and Ag related to the coated CFs were detected. After coating the CFs with varying concentrations of Ag NPs (1%, 2% and 3% (w/w)), they were used to remove dyes. Under the same concentration of 10 mg/L and optimized pH 7.5 and 2 h of reaction time, 3% (w/w) Ag-coated CFs exhibited a substantial MB degradation of 98 %, while removing 95% of methyl orange, 85% of rhodamine B, and 96% of Congo red, respectively, following 2 h of Vis exposure. Ag NPs had a strong absorption at 420 nm with 2.51 eV of energy band gap. Under UV irradiation, electrons excited and produced free radicals that promoted dyes photodegradation. The oxidation by-products included p-dihydroxybenzene and succinic acid. Spent Ag-coated CFs attained 98% of regeneration efficiency. The utilization of Ag-coated CFs as a photocatalyst facilitated treated effluents to meet the required discharge standard of lower than 1 mg/L mandated by national legislation. The integration of multifunctional CFs in the treatment system presents a new option for tackling water pollution due to dyes.

A pilot scale of electrochemical integrated treatment technology and equipment driven by solar energy for decentralized domestic sewage treatment

Based on the natural air diffusion electrode (NADE) cathode, a solar-driven electrochemical integrated sewage treatment technology and equipment in a pilot scale was developed to treat dispersed rural wastewater. The non-aeration NADE had efficient and stable H2O2 production performance, maintaining the H2O2 output between 1474 and 1535 mg h-1 within 50 h with the current efficiency of 77.4%-80.6%. This electrochemical integrated wastewater treatment system was coupled with technologies such as dual-cathode electro-Fenton, peroxi-coagulation and photoelectro-Fenton, which effectively improved the conversion and utilization efficiency of H2O2. It integrated Fenton-like oxidation, electro-oxidation and UV/H2O2, as well as Fe(OH)3-dominated flocculation, which could effectively remove various pollutants in wastewater. The integrated sewage treatment equipment (500 L d-1) realized the effective treatment of a rural decentralized domestic sewage, achieving simultaneous removal of chemical oxygen demand (COD), NH3-N, total phosphorus (TP) and bacteria. Driven by solar energy, its application feasibility, superiority and stability have been proved, providing theoretical and technical support for the efficient and low-consumption treatment of dispersed organic wastewater.

Advances in photothermal regulation strategies: from efficient solar heating to daytime passive cooling

Photothermal regulation concerning solar harvesting and repelling has recently attracted significant interest due to the fast-growing research focus in the areas of solar heating for evaporation, photocatalysis, motion, and electricity generation, as well as passive cooling for cooling textiles and smart buildings. The parallel development of photothermal regulation strategies through both material and system designs has further improved the overall solar utilization efficiency for heating/cooling. In this review, we will review the latest progress in photothermal regulation, including solar heating and passive cooling, and their manipulating strategies. The underlying mechanisms and criteria of highly efficient photothermal regulation in terms of optical absorption/reflection, thermal conversion, transfer, and emission properties corresponding to the extensive catalog of nanostructured materials are discussed. The rational material and structural designs with spectral selectivity for improving the photothermal regulation performance are then highlighted. We finally present the recent significant developments of applications of photothermal regulation in clean energy and environmental areas and give a brief perspective on the current challenges and future development of controlled solar energy utilization.

In-situ constructing amidoxime groups on metal-free g-C3N4 to enhance chemisorption, light absorption, and carrier separation for efficient photo-assisted uranium(VI) extraction

The development of inexpensive and efficient semiconductor catalysts for photo-assisted uranium extraction from seawater remains a huge challenge. Herein, we have successfully synthesized amidoxime-rich g-C3N4 (AO-C3N4) by simply amidoximing a cyano-rich precursor for photo-assisted uranium extraction from seawater. The amidoxime groups not only served as the U(VI) binding sites for efficient uranium adsorption, but also significantly improved the visible light absorption capacity and carrier separation efficiency via introducing defect energy level, resulting in the excellent photocatalytic activity for AO-C3N4 towards photo-assisted uranium extraction. In the process of photo-assisted uranium extraction, U(VI) was first adsorbed by the amidoxime groups on the AO-C3N4 and then reduced to U(IV), while (UO2)O2·2H2O and (UO2)O2·4H2O were further formed by the oxidation of U(IV) by superoxide radicals (·O2-). Moreover, the generated reactive oxygen species (ROS) under light endowed AO-C3N4 with outstanding antibacterial properties, preventing the limitation of uranium extraction capacity from marine biofouling.

Synergy of Adsorption and Photocatalytic Reduction for Efficient Removal of Cr(VI) with Polyvinylidene Fluoride@Polyvinyl Alcohol-FeC2O4/Bi2.15WO6

Although the photocatalytic reduction of Cr(VI) to Cr(III) by traditional powder photocatalysts is a promising method, the difficulty and poor recovery of photocatalysts from water hinder their wide practical applications. Herein, we present that FeC2O4/Bi2.15WO6 (FeC2O4/BWO) composites were tightly bonded to modified polyvinylidene fluoride (PVDF) membranes by chemical grafting with the aid of polyvinyl alcohol (PVA) to form photocatalytic composite membranes (PVDF@PVA-FeC2O4/BWO). The contact angle of PVDF@PVA-FeC2O4/BWO (0.06 wt % of FeC2O4/BWO) is 48.0°, which is much lower than that of the pure PVDF membrane (80.5°). Meanwhile, the permeate flux of 61.43 g m-2 h-1 and water flux of 250.60 L m-2 h-1 were observed for PVDF@PVA-FeC2O4/BWO composite membranes. The tensile strength of composite membranes reached 48.84 MPa, which was 9.8 times higher than that of PVDF membrane. It was found that the PVDF@PVA-FeC2O4/BWO membrane exhibited excellent photocatalytic Cr(VI) reduction performance under both simulated and real sunlight irradiation. The adsorption for Cr(VI) by PVDF@PVA-FeC2O4/BWO can reach 47.6% in the dark process within 30 min, and the removal percentage of Cr(VI) could reach 100% with a rate constant k value of 0.2651 min-1 after 10 min of light exposure, indicating a synergistic effect of adsorption and photoreduction for Cr(VI) removal by the composite membrane. The PVDF@PVA-FeC2O4/BWO membrane had good stability and reusability after seven consecutive cycles. Most importantly, the influences of foreign ions on Cr(VI) reduction were investigated to mimic real sewage, which revealed that no obvious adverse effects can be found with the presence of common foreign ions in sewage. The photocatalytic membrane material developed in this study provides a new idea for treating Cr(VI)-containing wastewater and has a more significant application prospect.

Radioactive Wastewater Treatment Technologies: A Review

With the wide application of nuclear energy, the problem of radioactive pollution has attracted worldwide attention, and the research on the treatment of radioactive wastewater is imminent. How to treat radioactive wastewater deeply and efficiently has become the most critical issue in the development of nuclear energy technology. The radioactive wastewater produced after using nuclear technology has the characteristics of many kinds, high concentration, and large quantity. Therefore, it is of great significance to study the treatment technology of radioactive wastewater in reprocessing plants. The process flow and waste liquid types of the post-treatment plant are reviewed. The commonly used evaporation concentration, adsorption, precipitation, ion exchange, biotechnology, membrane separation, and photocatalysis are summarized. The basic principles and technological characteristics of them are introduced. The advantages and disadvantages of different single and combined processes are compared, and the development trend of future processing technology is prospected.

Development of evaporation technique for concentrating lead acid wastewater from the battery recycling plant, by nanocomposite ceramic substrates and solar/wind energy

Wastewater from car battery recycling plants contains lead ions. This acidic wastewater was treated by the solar steam generation method. In this research, a light porous ceramic substrate (PCS) was made based on clay, human hair, and nano-hydroxyapatite. The physical and chemical characteristics of this PCS were identified by SEM, XRD, FTIR, BET, and TGA. The high porosity in PCSs was created due to the removal of human hair in the calcination process inside the furnace. Microchannels with capillarity and hydrophilicity of nano-hydroxyapatite quickly pump water molecules to the surface of PCSs. The wastewater treatment process was carried out on two laboratory and semi-industrial scales. The temperature of the surface of the PCSs reached 70 °C in less than 60 min with the radiant heat transfer mechanism, and the water molecules were evaporated with an evaporation rate and thermal conversion efficiency were 9.22 Kgm^-2h^-2 and 90%, respectively. The wind blew the vapor away from the system and the rate of evaporation increased. PCSs had the ability to regenerate after several consecutive cycles.

Efficient removal of Cs ion by electrochemical adsorption and desorption reaction using NiFe Prussian blue deposited carbon nanofiber electrode

Prussian blue (PB) analog (NiFe, CoFe, FeFe, and commercial(cPB)) decorated carbon nanofiber (CNF) electrodes were synthesized by the drop casting method in this study to investigate the interaction between PB and CNF for the electrochemical adsorption (EA) and electrochemical desorption (ED) of Cs ion (Cs⁺). The adhesion of PB on the electrode and the EA and ED of Cs⁺ were substantially higher when the CNF electrode was used, compared with the fluorine-doped tin oxide supporting electrode. The use of CNF led to the smooth occurrence of EA and ED of Cs⁺, where the reported efficiency was: NiFe > FeFe > cPB. The EA and ED of Cs⁺ on NiFe decorated CNF (C-NiFe) were strongly affected by the loading amount of NiFe. Although the strongest EA capacity was identified when 1 mg of NiFe was used, it decreased as the loading amount of NiFe increased. Thus, the EA of Cs⁺ occurs under the reduction of NiFe with some Fe(III) reduced to Fe(II) of NiFe, thus inducing more adsorption of Cs⁺. Overall, we confirmed that the C-NiFe electrode with appropriate thickness of NiFe layer is potentially an excellent adsorbent for Cs removal.

Removal of Hg2+ in wastewater by grafting nitrogen/sulfur-containing molecule onto Uio-66-NH2: from synthesis to adsorption studies

The remediation of heavy metal deserves to be on the agenda, with the adsorbent design bearing the brunt of it. In this study, the molecule (4, 6-diamino-2-mercaptopyrimidine, DMP) containing thiol (-SH) and amino (-NH₂) functional groups was grafted onto Uio-66-NH₂, and a composite metal-organic framework nanomaterial (Zr(NH₂)-DMP) was synthesized via a facile post-modification scheme. The morphological characteristics and structural features of the modified adsorbent were characterized by XRD, FT-IR, FE-SEM, EDS, BET, and XPS. The characterization results verified that the post-modification scheme was successfully achieved. The adsorption experiments were carried out to investigate the removal performance of the Zr(NH₂)-DMP towards Hg²⁺ under different influencing parameters. The maximum adsorption capacity of 389.4 mg/g was obtained, and the adsorption equilibrium was achieved within 30 min at pH 6 at room temperature. Adsorption thermodynamic study indicated that the adsorption process was exothermic and spontaneous. The Zr(NH₂)-DMP exhibited excellent selectivity for Hg²⁺, and also has the potential to remove Cu²⁺, Fe²⁺, and Zn²⁺ ions. The introduction of Cl^- inhibited the removal of Hg²⁺ due to the formation of mercuric chlorides (removal efficiency reduced from 97.8 to 95.6%). The removal efficiency of up to 86.7% was obtained after four cycles. The Langmuir isotherm and Pseudo-second kinetic were more suitable for fitting the adsorption process of Hg²⁺ by Zr(NH₂)-DMP. The main removal mechanism could be attributed to the chelation between Hg²⁺ (soft acid) and nitrogen/sulfur (soft base) elements. These findings convinced that the successful synthesis of Zr(NH₂)-DMP provides an option for Hg²⁺ removal from wastewater.

Efficient Strategy for U(VI) Photoreduction: Simultaneous Construction of U(VI) Confinement Sites and Water Oxidation Sites

Reduction of hexavalent uranium [U(VI)] by the photocatalytic method opens up a novel way to promote the selectivity, kinetics, and capacity during uranium removal, where organic molecules act as the sacrificial agents. However, the addition of sacrificial agents can cause a secondary environmental pollution and increase the cost. Here, a UiO-66-based photocatalyst (denoted as MnO_x/NH₂-UiO-66) simultaneously with efficient U(VI) confinement sites and water oxidation sites was successfully developed, achieving excellent U(VI) removal without sacrificial agents. In MnO_x/NH₂-UiO-66, the amino groups served as efficient U(VI) confinement sites and further decreased the U(VI) reduction potential. Besides, MnO_x nanoparticles separated the photogenerated electron-hole pairs and provided water oxidation sites. The U(VI) confinement sites and water oxidation sites jointly promoted the U(VI) photoreduction performance of MnO_x/NH₂-UiO-66, resulting in the removal ratio of MnO_x/NH₂-UiO-66 for U(VI) achieving 97.8% in 2 h without hole sacrifice agents. This work not only provides an effective UiO-66-based photocatalyst but also offers a strategy for effective U(VI) photoreduction.

Kinetic optimization of odor adsorption with acetate fiber cloth prepared from waste cigarette filter

Odor pollution with NH₃ as major contributor is a notorious issue that strongly influences our living environment. NH₃ removal with acetate fiber cloth (AFC) prepared from waste cigarette filter is an economic feasible approach for simultaneous solid wastes disposal. Herein, waste cigarette filter was used to prepare AFC through hot-pressing approach, which was convinced to have good adsorption efficiency on NH₃ due to large specific surface area. Effects of hot-pressing temperature, pressure and pressing time on AFC mechanical property and NH₃ adsorption efficiencies were optimized by response surface method. As results, hot-pressing treatment improved the specific surface area of AFC to 9.530 m²/g, and thus enhanced NH₃ adsorption efficiency to 68.73 % under hot-pressing temperature of 146 °C, pressure of 12.5 kPa and pressing time of 33 min. While the optimal tensile strength of AFC was obtained as 90.43 N under hot-pressing temperature of 140 °C, pressure of 15.0 kPa and pressing time of 30 min. The work provided an economic feasible approach for waste cigarette filter recycling and odor control.

Cellulose/Poly(vinyl alcohol)/Tannic Acid Porous Cross-Linked Composite Frame Materials with Excellent Oil/Water Separation Performance

Problems such as increasingly serious water pollution attracted widespread concern. The underwater OCAs of the samples became larger with increasing pH and the under-oil WCAs of the samples did not vary regularly with increasing pH. Nanoneedle structures were grown on metal foam by anodization. Cellulose is fixed to the frame by cross-linking with supramolecular binder poly(vinyl alcohol)/tannin. A cellulose/poly(vinyl alcohol)/tannin porous composite framework with special wettability is prepared. This porous composite framework can be used for the continuous separation of oil/water mixtures with high separation efficiency, high throughput, excellent reusability, and mechanical durability. In addition, due to the coating of cellulose and the supramolecular binder, the pore size of the frame is reduced, and the cagelike structure of the porous framework can promote its demulsification effect. Therefore, the cellulose/poly(vinyl alcohol)/tannic acid porous composite frame can also be used for the separation of oil/water emulsions. This porous frame material has broad application prospects in oil spill treatment and sewage purification.

Highly efficient adsorptive extraction of uranium from wastewater by novel kaolin aerogel

An environment-friendly, low-cost and efficient kaolin aerogel adsorbent (named as KLA) was synthesized via a freeze-drying-calcination method to solve the defect of low uranium removal rate for kaolin (KL). The removal rate of uranium on KLA reached 90.6 %, which was much higher than that of KL (69.2 %) (C₀ = 10 mg L^-1, t = 24 h, pH = 5.0, T = 298 K and m/V = 1.0 g L^-1). The uranium removal behavior on KLA was satisfied with Pseudo-second-order and Langmuir model, which meant that the uranium ions were immobilized on the surface of KLA via chemical reaction. Meanwhile, high temperature was in favor of the removal of uranium on KLA, indicating that the removal process was a spontaneous endothermic reaction. Compared with KL, KLA also presented better cycle ability and its removal rate of uranium was up to 80.5 % after three cycles, which was still higher than that of KL at the first cycle (74.5 %). On basis of the results of SEM, XRD, FT-IR and XPS, it could be concluded that uranium ions were adsorbed by KLA via complexation. Hence, KLA could be regarded as a feasible candidate for the removal of uranium from aqueous solution.

Electrocatalytic Removal of Low-Concentration Uranium Using TiO2 Nanotube Arrays/Ti Mesh Electrodes

Groundwater containing naturally occurring uranium is a conventional drinking water source in many countries. Removal of low concentrations of uranium complexes in groundwater is a challenging task. Here, we demonstrated that the TiO₂ nanotube arrays/Ti (TNTAs/Ti) mesh electrode could break through the concentration limit and efficiently remove low concentrations of uranium complexes from both simulated and real groundwater. U(VI) complexes in groundwater were electro-reduced to UO₂ and deposited on the TNTAs/Ti mesh electrode surface. The adsorption rate and electron transfer rate of the anatase TNTAs/Ti mesh electrode were twice that of the rutile TNTAs/Ti mesh electrode. Therefore, the anatase TNTAs/Ti mesh electrode exhibited excellent electrocatalytic activity toward the electrochemical removal of U(VI), which could work at a higher potential and significantly reduce the energy consumption of U(VI) removal. The U(VI) adsorption capacity on the anatase TNTAs/Ti mesh electrode was limited due to the low U(VI) concentration. However, the anatase TNTAs/Ti mesh electrode displayed a huge U(VI) removal capacity using the electroreduction method, where adsorption and reduction of U(VI) were mutually promoted and induced continuous accumulation of UO₂ on the electrode. The accumulated UO₂ can be easily recovered in dilute HNO₃, and the electrode can be used repeatedly.

Explorations on efficient extraction of uranium with porous coal fly ash aerogels

In order to explore a suitable uranium adsorbent with the advantages of low-cost, recyclability and high efficiency, porous coal fly ash aerogels with different size of coal fly ash were synthesized. Among them, PCFAA-1250 (prepared with 1250 mesh coal fly ash (CFA)) showed better adsorption performance and the maximum adsorption efficiency even approached 96.5% (C₀ = 10 mg L^-1, m/V = 1.0 g L^-1, T = 298 K, t = 24 h and pH = 3.0), which was higher than most of previous adsorbents. Langmuir and pseudo-second-order models were more likely to be used to determine the removal behavior of uranium on PCFAA, illustrating that the adsorption reaction was uniform chemisorption. Meanwhile, the adsorption process on PCFAA was spontaneous. Notably, the desorption efficiencies of all of PCFAA were more than 80% after five cycles, which suggested that PCFAA possessed good recyclability, especially PCFAA-1250. Besides, the adsorption mechanism was further revealed via XPS and the uranium ions were immobilized on the surface of adsorbents through complexation. Based on above conclusions, it could be concluded that PCFAA-1250 had the potential to be a candidate for the extraction of uranium from wastewater.

Co-construction of molecular-level uranyl-specific "nano-holes" with amidoxime and amino groups on natural bamboo strips for specifically capturing uranium from seawater

Efficiently capturing of uranium (VI) [U(VI)] from seawater elicits unparalleled attraction for sustaining the uplifted requirement for nuclear fuel. However, obtaining the abundant U(VI) resource from seawater has always seriously restricted by competitive adsorption from higher concentrations of competitors, especially vanadium (V) [V(V)]. Herein, based on amidoximized natural bamboo strips with hierarchical porous structure, the molecular-level uranyl-specific "nano-holes" was co-constructed by the intramolecular hydrogen bonds for specifically trapping U(VI) from seawater. Manipulating the branched degrees of amino groups enabled the creation of a series of the molecular-level uranyl-specific "nano-holes" that exhibit ultrahigh affinity and selective adsorption of U(VI) with a adsorption capacity 1.8 fold higher compared to that of V(V) after 30 days floating in the Yellow Sea basin, conquering the long-term challenge of the competitive adsorption of V(V) for amidoxime-based adsorbents applied to extract U(VI) from seawater. The diameter of the molecular-level uranyl-specific "nano-holes" is approximately 12.07 Å, significantly larger than (UO₂)₃(OH)₃⁺ (10.37 Å) and smaller than HV₁₀O₂₈^5-, thereby exhibiting specifically trapping of U(VI) in a series of adsorption experiments with different U(VI)-V(V) ratios. Besides, the adsorption model based on the combination of experimental and theoretical results is accompanied by "hydrogen bond breaking and coordination bond formation".

Facile synthesis of low-cost MnPO4 with hollow grape-like clusters for rapid removal uranium from wastewater

In order to deal with the environmental resource problems caused by nuclear pollution and uranium mine wastewater, it is particularly important to develop uranium removal adsorbent materials with low cost, high efficiency and controllable rapid preparation. In this work, the hollow grape-like manganese phosphate clusters (h-MnPO₄) were synthesized in 4 h by in-situ etching without template at room temperature, which can quickly and effectively remove uranium ions from wastewater. Due to the reasonable hollow structure, more effective adsorption sites are exposed. The obtained sample h-MnPO₄-200 reaches adsorption equilibrium in 1 h and can remove 97.20% uranyl ions (initial concentration is 100 mg L^-1). Under the condition of 25 ℃ and pH= 4, the maximum adsorption capacity of h-MnPO₄-200 for uranium was 751.88 mg g^-1. The FT-IR, XPS and XRD analysis showed that -OH and PO₄^3- groups played a key role in the adsorption process. Thanks to the synergistic adsorption mechanism of surface complexation and dissolution-precipitation, h-MnPO₄-200 maintained a high removal rate in the presence of competitive anions and cations. In a word, h-MnPO₄-200 can be rapidly synthesized through a facile and low-cost method and has a great application prospect in the practical emergency treatment of uranium-containing wastewater.

Oak-inspired anti-biofouling shape-memory unidirectional scaffolds with stable solar water evaporation performance

Biomimetic porous materials have contributed to the enhancement of solar-driven evaporation rate in interfacial desalination and clean water production. However, due to the presence of numerous microbes in water environment, biofouling should occur inside porous materials to clog the channels for water transfer, resulting in obvious inhibition of the solar-driven evaporation efficacy in long-term use. To prevent and control biofouling in porous materials for solar-driven evaporation, a facile and environment-friendly design is required in real application. Oak wood possesses vertically aligned channels for transpiration and polyphenol compounds with antimicrobial activity. In this work, inspired by the oak wood, we developed an anti-biofouling shape-memory chitosan scaffold with unidirectional channels and tannic acid coating (oak-inspired scaffold). The shape-memory property facilitated rapid decoration with oak-inspired photothermal and anti-biofouling coating inside the scaffold, respectively, which also promotes the material durability by avoiding the external force-induced permanent structure failure. More importantly, the oak-inspired tannic acid coating not only prevented bacterial adhesion and colonization, but also inhibited fungal interference. They were subjected to a microbe-rich environment, and after 3 days, the evaporation rates of the untreated chitosan scaffolds were obviously decreased to 1.24, 1.16 and 1.19 kg m^-2 h^-1 for C. albicans, S. aureus and E. coli, respectively, which were only 65.6, 61.4 and 63.0% of original performance (1.89 kg m^-2 h^-1). In comparison, the oak-inspired scaffold exhibited a high solar-driven water evaporation rate after incubation in microbial suspensions (1.80, 1.70 and 1.75 kg m^-2 h^-1 for C. albicans, S. aureus and E. coli after 3 days) and lake water (1.74 kg m^-2 h^-1 after one month). The bioinspired anti-biofouling scaffolds maintain as high as 86.7-91.8% of the solar-driven water evaporation ability after exposure to a microbe-rich environment, which is conducive to develop a biomimetic long-term durable structure in water treatment.

Superhydrophilic Modified Elastomeric RGO Aerogel Based Hydrated Salt Phase Change Materials for Effective Solar Thermal Conversion and Storage

As a typical phase-change material (PCM) with high heat storage capacity and wide distribution, hydrated salts play broad and critical roles in solar energy utilization in recent years. However, the leakage and supercooling problems of hydrated salts have been a constraint to their further practical applications. In the current work, the super-hydrophilic reduced graphene oxide (RGO) aerogels modified by konjac glucomannan (KGM) as supporting structural materials are prepared by the hydrothermal reaction-freeze-drying, which can effectively absorb and convert visible sunlight energy into thermal energy. In addition, the super-hydrophilic aerogels compounded with PCMs can ameliorate the shortcoming of leakage and suppress the supercooling temperature as low about 0.2-1.5 °C in the freezing process. Under 1 sun irradiation, the prepared sodium acetate trihydrate/KGM-modified graphene oxide aerogel (SAT/KRGO) composite PCM achieves a high photothermal conversion efficiency (86.3%) due to its good light absorption property. The number of cycles has no apparent effect on the supercooling of the composite materials, suggesting their stable thermal cycles and thermal storage.

Enhanced uranium photoreduction on Ti3C2Tx MXene by modulation of surface functional groups and deposition of plasmonic metal nanoparticles

Photocatalytic reduction of soluble hexavalent uranium (U(VI)) is a novel and efficient avenue to enriching U(VI), where the free U(VI) is firstly bound on the surface of photocatalysts and then reduced to insoluble tetravalent uranium (U(IV)) by photoelectrons. Therefore, constructing the efficient U(VI) binding sites on photocatalysts is an efficient strategy to boost catalytic activity toward U(VI) photoreduction. Herein, we successfully constructed an efficient catalyst for U(VI) photoreduction by depositing Ag nanoparticles on Ti₃C₂T_x MXene with abundant U(VI) binding sites (Ag/Ti₃C₂T_x-O). Impressively, the U(VI) extracting mass over Ag/Ti₃C₂T_x-O under light reached up to 1257.6 mg/g in 120 min, which was almost 11 times as high as that without light. Further mechanistic studies indicated that the U(VI) binding sites on Ti₃C₂T_x MXene in Ag/Ti₃C₂T_x-O were beneficial to the reduction of U(VI) by significantly decreasing its reduction potential. More importantly, hot electrons generated by Ag nanoparticles were transferred into the binding sites to easily reduce the bound U(VI), resulting in the remarkable performance of Ag/Ti₃C₂T_x-O during U(VI) enrichment.

Efficient removal of U(VI) in acidic environment with spent coffee grounds derived hydrogel

In this study, humic-like substances (HLSs) was extracted from spent coffee grounds (SCGs), and it together with poly acrylic acid (PAA), was used for the first time to synthesize hydrogel material, namely HLSs/PAA gel, by one-step radical polymerization. Its maximum theoretical sorption capacity toward U(VI) at pH 3.00 was 661.01 mg/g, and it could decrease the concentration of U(VI) in acidic actual groundwater from 0.2537 to 0.0003 mg/L, showing that the gel had excellent U(VI) removal efficiency in acidic environment. The SEM characterization of HLSs/PAA gel showed that its macroporous network structure maintained well after the sorption process, indicating that the gel had excellent acid-resistant property. Moreover, the gel exhibited excellent anti-interference performance in the interfering ions effect experiment. The gel integrates the merits of excellent U(VI) sorption properties, stability and anti-interference performance in acidic environment, and has promising application prospects in the remediation of acidic uranium wastewater.

Synthesis of Uranium Single Atom from Radioactive Wastewater for Enhanced Water Dissociation and Hydrogen Evolution

As a common nuclide in radioactive wastewater, uranium (U) is generally treated by landfill, which induces the massive abandonment of uranium resources. In this work, a pulse voltammetry method for the synthesis of U single atoms on MoS₂ (U/MoS₂ ) nanosheets from radioactive wastewater for the electrocatalytic alkaline hydrogen evolution reaction (HER) is reported. The mass loading of U single atoms is facilely controlled with high selectivity for coexisting ions in radioactive wastewater. In the electrolyte of 1 m of KOH, U/MoS₂ nanosheets with 5.2% of U single atoms exhibit relatively low overpotentials of 72 mV at 10 mA cm^-2 . The mechanistic study reveals that the HER on U/MoS₂ includes the water dissociation on U single atoms to form OH* and H transfer from OH* to adjacent S-edge atoms. This procedure exhibits decreased activation energy for transition state in water dissociation and optimized Gibbs free energy for H* adsorption.

Low-temperature carbonization synthesis of carbon-based super-hydrophobic foam for efficient multi-state oil/water separation

In view of the complexity and diversity of multi-state oils, the development of green and low-cost materials with high selectivity to oils has important ecological significance in the polluted water treatment. Herein, a simple method was proposed to develop large-scale production of superhydrophobic sponges (CPMF200 sponges) for high-efficiency oil/water separation under different complex environments. The as-prepared CPMF200 sponges possessed many superior properties, including high roughness, well-developed porosity, good thermal stability, excellent chemical stability, and superhydrophobic properties (water contact angle is 152°), which is conducive to high oil adsorption capacity (up to 70-179 times of its own weight) and oil-water separation. More importantly, the CPMF400 sponge has an excellent photothermal conversion capability to improve the fluidity of high viscosity oil for oil recovery. Based on a simple synthesis method, it exhibits high-efficiency absorption of multi-state oils and excellent oil-water separation performance and strongly proves their application prospects in treating oily wastewater.

Metal-free 2D/2D C3N5/GO nanosheets with customized energy-level structure for radioactive nuclear wastewater treatment

How to efficiently treat radioactive uranium-containing nuclear wastewater is one of the significant challenges to ensure the safety of nuclear technology and to avoid environmental pollution. Here we firstly prepare the metal-free 2D/2D C₃N₅/GO nanosheets, and customize a type-II heterojunction based on the band bending theory to achieve enhanced uranium extraction capacity via synergistic adsorption photoreduction engineering. The structure of C₃N₅ is explained by electron energy loss spectroscopy and synchrotron-based near-edge X-ray absorption fine structure. And C₃N₅ with larger π-conjugated structure expands the light response range to 747 nm, which is about 1.67 times that of C₃N₄. Further, we also use density functional theory to prove the existence of alternating energy levels so that photogenerated electrons could be continuously injected into the surface of GO to ensure the effective separation of electron-hole pairs and increase the material activity. The results show that the removal ratio of uranium by 2D/2D C₃N₅/GO heterojunction is achieved as high as 96.1% even at a low uranium concentration of 10 ppm, and reached 93.4% after exposure to gamma-ray. This work will lay a foundation for customizing the energy band structure of nonmetal-based 2D/2D nanohybrids and enriching uranium-containing wastewater through adsorption photoreduction engineering in the future.

An environmental energy-enhanced solar steam evaporator derived from MXene-decorated cellulose acetate cigarette filter with ultrahigh solar steam generation efficiency

Although solar energy is promising for water purification, there is still a room for further improving the solar steam generation efficiency. Herein, an environmental energy-enhanced solar steam evaporator is fabricated by immersing a cellulose acetate fiber-based cigarette filter (CF) in an aqueous solution of polyvinyl alcohol (PVA) followed by freeze-drying and decorating with MXene sheets. The presence of MXene is to absorb solar light and convert solar energy to thermal energy for efficient water evaporation, while the porous PVA network generated inside the pores of the filter during the freeze-drying process accommodates the dispersed MXene sheets and interconnects the CF and MXene. Because of the constructed PVA/MXene network inside the CF porous architecture and the hydrophilic feature of both MXene and PVA, the resultant MXene/PVA modified CF (MPCF) is highly hydrophilic and competent for rapid upward transfer of water. Interestingly, in addition to the normal energy input by the incident solar light, the large-area sidewall of MPCF gains thermal energy from the environment in the forms of heat convection and heat radiation to enhance the solar steam generation efficiency, resulting in an ultrahigh water evaporation rate of 3.38 kg m^-2 h^-1 with an outstanding evaporation efficiency of 132.9%.

Efficient photoreduction of hexavalent uranium over defective ZnO nanoparticles by oxygen defect engineering

The oxygen-defect engineering of ZnO-400 nanosheets to enhance their photocatalytic performance for U(vi) reduction.

Mechanically robust biomass-derived carbonaceous foam for efficient solar water evaporation

The biomass-derived carbonaceous foam with excellent mechanical strength and evaporation efficiency has promising potential for practical interfacial solar water treatment.

Oriented attachment and aggregation as a viable pathway to self-assembled organic/inorganic hybrid materials

The intrinsic particle-based mechanisms of calcium sulfate crystallisation are exploited to incorporate specific organic polymers in the emerging mineral phase and thus obtain biomimetic organic/inorganic hybrid structures via self-organisation.

Yolk-like non-stoichiometric nickel sulfide-based Janus hydrogel photothermal film for enhanced solar-driven water evaporation and multi-media purification

Solar-driven interface water evaporation is a promising strategy for desalination and wastewater treatment. However, it remains a huge challenge to simultaneously achieve a high light-to-heat conversion efficiency (η) and multi-media evaporation applications. In this study, a highly efficient Janus hydrogel photothermal film was developed using yolk-like non-stoichiometric nickel sulfide (NiS_2-x) microspheres and agar hydrogel. The NiS_2-x immobilized in the agar hydrogel has full-spectrum absorption characteristics at 200-2500 nm, which can perform efficient light-to-heat conversion and regulate water transport channels. Additionally, the pure agar in the bottom can transport water effectively and avoid heat loss. By the pouring method, the Janus hydrogel film can be easily prepared into various shapes; hence, it can be adjusted depending on the environment in which it is used. The optimized Janus hydrogel film (Janus hydrogel-1) possessed good hydrophilicity and showed an excellent solar evaporation rate of 1.45 kg m^-2h^-1, and a high η of 97% under one-sun irradiation. Theoretical simulation results showed that the outstanding water evaporation performance of Janus hydrogel-1 was mainly due to its relatively free water transport channels. Janus hydrogel-1 can be used for water evaporation applications in various media, including seawater, heavy metal ion/organic wastewater, and domestic sewage. Our work highlights the great potential of Janus hydrogel-1 for realizing a highly effective solar energy-driven interface water evaporation and multi-media purification.

3D Photothermal Cryogels for Solar-Driven Desalination

This paper reports the fabrication of photothermal cryogels for freshwater production via the solar-driven evaporation of seawater. Photothermal cryogels were prepared via in situ oxidative polymerization of pyrrole with ammonium persulfate on preformed poly(sodium acrylate) (PSA) cryogels. We found that the pyrrole concentration used in the fabrication process has a significant effect on the final PSA/PPy cryogels (PPCs), causing the as-formed polypyrrole (PPy) layer on the PPC to evolve from nanoparticles to lamellar sheets and to consolidated thin films. PPC fabricated using the lowest pyrrole concentration (i.e., PPC10) displays the best solar-evaporation efficiency compared to the other samples, which is further improved by switching the operative mode from floating to standing. Specifically, in the latter case, the apparent solar evaporation rate and solar-to-vapor conversion efficiency reach 1.41 kg m-2 h-1 and 96.9%, respectively, due to the contribution of evaporation from the exposed lateral surfaces. The distillate obtained from the condensed vapor, generated via solar evaporation of a synthetic seawater through PPC10, shows an at least 99.99% reduction of Na while all the other elements are reduced to a subppm level. We attribute the superior solar evaporation and desalination performance of PPC10 to its (i) higher photoabsorption efficiency, (ii) higher heat localization effect, (iii) open porous structure that facilitates vapor removal, (iv) rough pore surface that increases the surface area for light absorption and water evaporation, and (v) higher water-absorption capacity to ensure efficient water replenishment to the evaporative sites. It is anticipated that the gained know-how from this study would offer insightful guidelines to better designs of polymer-based 3D photothermal materials for solar evaporation as well as for other emerging solar-related applications.

A Bioinspired Elastic Hydrogel for Solar-Driven Water Purification

The global demand for clean and safe water will continue to grow well into the 21st century. Moving forward, the lack of access to clean water, which threatens human health and strains precious energy resources, will worsen as the climate changes. Therefore, future innovations that produce potable water from contaminated sources must be sustainable. Inspired by nature, a solar absorber gel (SAG) is developed to purify water from contaminated sources using only natural sunlight. The SAG is composed of an elastic thermoresponsive poly(N-isopropylacrylamide) (PNIPAm) hydrogel, a photothermal polydopamine (PDA) layer, and a sodium alginate (SA) network. Production of the SAG is facile; all processing is aqueous-based and occurs at room temperature. Remarkably, the SAG can purify water from various harmful reservoirs containing small molecules, oils, metals, and pathogens, using only sunlight. The SAG relies on solar energy to drive a hydrophilic/hydrophobic phase transformation at the lower critical solution temperature. Since the purification mechanism does not require water evaporation, an energy-intensive process, the passive solar water-purification rate is the highest reported. This discovery can be transformative in the sustainable production of clean water to improve the quality of human life.

Efficient Photocatalytic Extraction of Uranium over Ethylenediamine Capped Cadmium Sulfide Telluride Nanobelts

The photocatalysts for hexavalent uranium (U(VI)) reduction suffered from the low uranium uptake capacity and weak long-wavelength light absorption. Herein, we synthesized the CdS_xTe_1-x nanobelts capped by ethylenediamine (EDA), which provided amino groups as the adsorption sites. With the increase of the Te content, the amino groups on the CdS_xTe_1-x nanobelts decreased because of the variation of the electron density of Cd²⁺, whereas the light adsorption was enhanced due to the narrowed bandgap. In photocatalytic reduction of U(VI), the CdS_0.95Te_0.05-EDA nanobelts exhibited a considerable U(VI) removal ratio of 97.4% with a remarkable equilibrium U(VI) extraction amount on per weight unit of the adsorbent (q_e) of 836 mg/g. The bandgap structure and Fourier transform infrared spectroscopy (FT-IR) spectra analysis revealed that the optimum photocatalytic activity of CdS_xTe_1-x nanobelts was achieved at a 5% of Te^2- doping, which balanced the factors of amino groups and bandgap. This adsorption-photoreduction process offers an ultrahigh uranium extraction capacity over wide uranium concentrations.

Synthesis of a Stable Solid Acid Catalyst from Chloromethyl Polystyrene through a Simple Sulfonation for Pretreatment of Lignocellulose in Aqueous Solution

A stable solid acid catalyst, SCPR140-1, was synthesized from chloromethyl polystyrene resin (CPR) and used for catalytic pretreatment of corncob in aqueous solution. Under the optimized pretreatment condition, 73.07 % of xylose was directly obtained, and the enzymatic digestibility of treated residue reached up to 94.65 %, indicating that the SCPR140-1 had high selectivity for xylose production and effectively deconstructed the structure of corncob. The -CH₂ Cl group of CPR was substituted by -SO₃ H through the sulfonation, and the -SO₃ H was stably bound on the catalyst during the pretreatment process. Compared with other similar reports, the SCPR140-1 was not only synthesized through a simpler process but also had a more stable catalytic activity during multiple recycling runs.

Metal-phenolic network coated cellulose foams for solar-driven clean water production

Solar-driven water steam generation is a promising strategy for seawater desalination and wastewater purification. However, oil contaminants commonly exist in real water resources, which drives us to design and fabricate photothermal materials with high efficient water steam generation and outstanding anti-oil-fouling ability. Herein, we developed a metal-phenolic network-coated cellulose foam (Fe³⁺/TA@CF), which exhibits not only superb hydrophilicity and underwater lipophobicity, but also achieves high water evaporation rate of ∼1.3 kg m^-2 h^-1 even in oil-polluted seawater under one sun illumination. In addition, Fe³⁺/TA@CF is demonstrated to be both anti-oil-fouling and anti-salt-fouling, which benefits to long-term evaporation in practical utilizations. Metal ions and oil contaminants in the condensed water vapor are almost eliminated after purification. We believe that this low-cost, biodegradable Fe³⁺/TA@CF paves a way for rationally designing and fabricating high-performance evaporator for oil contaminated water purification.