Organochlorine pesticides contaminated soil decontamination using TritonX-100-enhanced advanced oxidation under electrokinetic remediation

Hybrid and enhanced electrokinetic system for soil remediation from heavy metals and organic matter

The electrokinetic (EK) process has been proposed for soil decontamination from heavy metals and organic matter. The advantages of the EK process include the low operating energy, suitability for fine-grained soil decontamination, and no need for excavation. During the last three decades, enhanced and hybrid EK systems were developed and tested for improving the efficiency of contaminants removal from soils. Chemically enhanced-EK processes exhibited excellent efficiency in removing contaminants by controlling the soil pH or the chemical reaction of contaminants. EK hybrid systems were tested to overcome environmental hurdles or technical drawbacks of decontamination technologies. Hybridization of the EK process with phytoremediation, bioremediation, or reactive filter media (RFM) improved the remediation process performance by capturing contaminants or facilitating biological agents' movement in the soil. Also, EK process coupling with solar energy was proposed to treat off-grid contaminated soils or reduce the EK energy requirements. This study reviews recent advancements in the enhancement and hybrid EK systems for soil remediation and the type of contaminants targeted by the process. The study also covered the impact of operating parameters, imperfect pollution separation, and differences in the physicochemical characteristics and microstructure of soil/sediment on the EK performance. Finally, a comparison between various remediation processes was presented to highlight the pros and cons of these technologies.

Emerging contaminants: A One Health perspective

Environmental pollution is escalating due to rapid global development that often prioritizes human needs over planetary health. Despite global efforts to mitigate legacy pollutants, the continuous introduction of new substances remains a major threat to both people and the planet. In response, global initiatives are focusing on risk assessment and regulation of emerging contaminants, as demonstrated by the ongoing efforts to establish the UN's Intergovernmental Science-Policy Panel on Chemicals, Waste, and Pollution Prevention. This review identifies the sources and impacts of emerging contaminants on planetary health, emphasizing the importance of adopting a One Health approach. Strategies for monitoring and addressing these pollutants are discussed, underscoring the need for robust and socially equitable environmental policies at both regional and international levels. Urgent actions are needed to transition toward sustainable pollution management practices to safeguard our planet for future generations.

Research progress on remediation of organochlorine pesticide contamination in soil

Deteriorated soil pollution has grown into a worldwide environmental concern over the years. Organochlorine pesticide (OCP) residues, featured with ubiquity, persistence and refractoriness, are one of the main pollution sources, causing soil degradation, fertility decline and nutritional imbalance, and severely impacting soil ecology. Furthermore, residual OCPs in soil may enter the human body along with food chain accumulation and pose a serious health threat. To date, many remediation technologies including physicochemical and biological ways for organochlorine pollution have been developed at home and abroad, but none of them is a panacea suitable for all occasions. Rational selection and scientific decision-making are grounded in in-depth knowledge of various restoration techniques. However, soil pollution treatment often encounters the interference of multiple factors (climate, soil properties, cost, restoration efficiency, etc.) in complex environments, and there is still a lack of systematic summary and comparative analysis of different soil OCP removal methods. Thus, to better guide the remediation of contaminated soil, this review summarized the most commonly used strategies for OCP removal, evaluated their merits and limitations and discussed the application scenarios of different methods. It will facilitate the development of efficient, inexpensive and environmentally friendly soil remediation strategies for sustainable agricultural and ecological development.

An overview of electrokinetically enhanced chemistry technologies for organochlorine compounds (OCs) remediation from soil

In recent years, electrokinetic (EK) remediation technology has gained significant attention among researchers. This technology has proven effective in the remediation of low-permeability polluted soil. Organochlorines (OCs) are highly toxic, persistent, bioaccumulative, and capable of long-distance migration. They can also accumulate through the food chain, posing significant environmental risks. This paper provides a review of the reaction mechanism of combining chemical technology with EK remediation for the removal of several typical OCs. Furthermore, the factors influencing the efficiency of EK remediation, such as pH and ζ potential, voltage gradients, electrode materials, electrolytes, electrode arrangements, and soil types, are summarized. The paper also presents an overview of recent advancements in the methods of combining chemical technology with EK remediation for the treatment of OCs contaminated soil. Specifically, the research progress in surfactants-combined EK technology, chemical oxidation-combined EK technology, chemical reduction-combined EK technology, and chemical adsorption-combined EK technology is summarized. These findings serve as a foundation for ongoing and future research endeavors in the field. Further exploration and investigation in this area are essential for advancing the field and improving environmental remediation strategies.

Remediation of 2,4-dichlorophenol-contaminated soil by electrokinetic delivery of persulfate technology

2,4-Dichlorophenol (2,4-DCP) is difficult to degrade rapidly in the environment due to its stable chemical properties, so it was easy to lead to serious chlorophenol pollution in soil. Consequently, a remediation method which is efficient, safe, and economical is required. In this study, electrokinetic (EK) remediation was used to transfer sodium persulfate (Na2S2O8) into soil to degrade 2,4-DCP, and the effect of several factors (including the addition location of Na2S2O8, applied voltage, and running time) on the remediation efficiency was explored. The concentration of Na2S2O8, residual efficiency of 2,4-DCP and distribution characteristics of pH, and electrical conductivity were analyzed. The results showed that the cathode was the optimal position to add Na2S2O8. Under this condition, Na2S2O8 was uniformly distributed in the whole soil column through electromigration. The optimal removal efficiency of 2,4-DCP in soil by adding Na2S2O8 was approximately 26% when the voltage gradient was 1.0 V/cm and the operating time was 9 days, which was mainly due to the degradation of S2O82-.

Toxicity sharing model of earthworm intestinal microbiome reveals shared functional genes are more powerful than species in resisting pesticide stress

Earthworm intestinal bacteria and indigenous soil bacteria work closely during various biochemical processes and play a crucial role in maintaining the internal stability of the soil environment. However, the response mechanism of these bacterial communities to external pesticide disturbance is unknown. In this study, soil and earthworm gut contents were metagenomically sequenced after exposure to various concentrations of nitrochlorobenzene (0-1026.7 mg kg^-1). A high degree of similarity was found between the microbial community composition and abundance in the worm gut and soil, both of which decreased significantly (P < 0.05) under elevated pesticide stress. The toxicity sharing model (TSM) showed that the toxicity sharing capacity was 97.4-125.7 % and 100.4-130.2 % for E_genes (genes in the worm gut) and E_met(degradation genes in the worm gut) in the earthworm intestinal microbiome, respectively. This indicated that the earthworm intestinal microbiome assisted in relieving the pesticide toxicity of the indigenous soil microbiome. This study showed that the TSM could quantitatively describe the toxic effect of pesticides on the earthworm intestinal microbiome. It provides a new analytical model for investigating the ecological alliance between earthworm intestinal microbiome and indigenous soil microbiome under pesticide stress while contributing a more profound understanding of the potential to use earthworms to mitigate pesticide pollution in soils and develop earthworm-based soil remediation techniques.

Integrating Biochar, Bacteria, and Plants for Sustainable Remediation of Soils Contaminated with Organic Pollutants

The contamination of soil with organic pollutants has been accelerated by agricultural and industrial development and poses a major threat to global ecosystems and human health. Various chemical and physical techniques have been developed to remediate soils contaminated with organic pollutants, but challenges related to cost, efficacy, and toxic byproducts often limit their sustainability. Fortunately, phytoremediation, achieved through the use of plants and associated microbiomes, has shown great promise for tackling environmental pollution; this technology has been tested both in the laboratory and in the field. Plant-microbe interactions further promote the efficacy of phytoremediation, with plant growth-promoting bacteria (PGPB) often used to assist the remediation of organic pollutants. However, the efficiency of microbe-assisted phytoremediation can be impeded by (i) high concentrations of secondary toxins, (ii) the absence of a suitable sink for these toxins, (iii) nutrient limitations, (iv) the lack of continued release of microbial inocula, and (v) the lack of shelter or porous habitats for planktonic organisms. In this regard, biochar affords unparalleled positive attributes that make it a suitable bacterial carrier and soil health enhancer. We propose that several barriers can be overcome by integrating plants, PGPB, and biochar for the remediation of organic pollutants in soil. Here, we explore the mechanisms by which biochar and PGPB can assist plants in the remediation of organic pollutants in soils, and thereby improve soil health. We analyze the cost-effectiveness, feasibility, life cycle, and practicality of this integration for sustainable restoration and management of soil.

Roles of oxidant, activator, and surfactant on enhanced electrokinetic remediation of PAHs historically contaminated soil

Electrokinetic (EK) remediation technology can enhance the migration of reagents to soil and is especially suitable for in situ remediation of low permeability contaminated soil. Due to the long aging time and strong hydrophobicity of polycyclic aromatic hydrocarbons (PAHs) from historically polluted soil, some enhanced reagents (oxidant, activator, and surfactant) were used to increase the mobility of PAHs, and remove and degrade PAHs in soil. However, under the electrical field, there are few reports on the roles and combined effect of oxidant, activator, and surfactant for remediation of PAHs historically contaminated soil. In the present study, sodium persulfate (PS, oxidant, 100 g L-1) or/and Tween 80 (TW80, surfactant, 50 g L-1) were added to the anolyte, and citric acid chelated iron(II) (CA-Fe(II), activator, 0.10 mol L-1) was added to catholyte to explore the roles and contribution of enhanced reagents and combined effect on PAHs removal in soil. A constant voltage of 20 V was applied and the total experiment duration was 10 days. The results showed that the removal rate of PAHs in each treatment was PS + CA-Fe(II) (21.3%) > PS + TW80 + CA-Fe(II) (19.9%) > PS (17.4%) > PS + TW80 (11.4%) > TW80 (8.1%) > CK (7.5%). The combination of PS and CA-Fe(II) had the highest removal efficiency of PAHs, and CA-Fe(II) in the catholyte could be transported toward anode via electromigration. The addition of TW80 reduced the electroosmotic flow and inhibited the transport of PS from anolyte to the soil, which decreased the removal of PAHs (from 17.4 to 11.4% with PS, from 21.3 to 19.9% with PS+CA-Fe(II)). The calculation of contribution rates showed that PS was the strongest enhancer (3.3~9.9%), followed by CA-Fe(II) (3.9~8.5%) (with PS), and the contribution of TW80 was small and even negative (-1.4~0.6%). The above results indicated that the combined application of oxidant and activator was conducive to the removal of PAHs, while the addition of surfactant reduced the EOF and the migration of oxidant and further reduced the PAHs removal efficiency. The present study will help to further understand the role of enhanced reagents (especially surfactant) during enhanced EK remediation of PAHs historically contaminated soil.

A review for recent advances on soil washing remediation technologies

Contaminated soils have caused serious harm to human health and the ecological environment due to the high toxicity of organic and inorganic pollutants, which has attracted extensive attention in recent years. Because of its low cost, simple operation and high efficiency, soil washing technology is widely used to permanently remove various pollutants in contaminated soils and is considered to be the most promising remediation technology. This review summarized the recent developments in the field of soil washing technology and discusses the application of conventional washing agents, advanced emerging washing agents, the recycling of washing effluents and the combination of soil washing and other remediation technologies. Overall, the findings provide a comprehensive understanding of soil washing technology and suggest some potential improvements from a scientific and practical point of view.

Coupling surfactants with ISCO for remediating of NAPLs: Recent progress and application challenges

Non-aqueous phase liquids (NAPLs) pose a serious risk to the soil-groundwater environment. Coupling surfactants with in situ chemical oxidation (ISCO) technology is a promising strategy, which is attributed to the enhanced desorption and solubilization efficiency of NAPL contaminants. However, the complex interactions among surfactants, oxidation systems, and NAPL contaminants have not been fully revealed. This review provides a comprehensive overview on the development of surfactant-coupled ISCO technology focusing on the effects of surfactants on oxidation systems and NAPLs degradation behavior. Specifically, we discussed the compatibility between surfactants and oxidation systems, including the non-productive consumption of oxidants by surfactants, the role of surfactants in catalytic oxidation systems, and the loss of surfactants solubilization capacity during oxidation process. The effect of surfactants on the degradation behavior of NAPL contaminants is then thoroughly summarized in terms of degradation kinetics, byproducts and degradation mechanisms. This review demonstrates that it is crucial to minimize the negative effects of surfactants on NAPL contaminants oxidation process by fully understanding the interaction between surfactants and oxidation systems, which would promote the successful implementation of surfactant-coupled ISCO technology in remediation of NAPLs-contaminated sites.

Removal of lindane using electrokinetic soil flushing coupled with air stripping

This paper evaluates the remediation of soil spiked with lindane using a combined treatment consisting of electrokinetic soil flushing (EKSF) with air stripping to elucidate the main processes occurring in the soil when electric fields of 0.75 V cm−1 and 1.50 V cm−1 are applied. The results demonstrate that lindane is efficiently transported to the anodic and cathodic wells using flushing fluids containing sodium dodecyl sulfate (SDS). Additionally, an important amount is volatilized and stripped with the injected air. In the cathodic well, lindane is rapidly transformed into other species because of the strongly alkaline media. These other species are also found in the portions of soil next to this well, confirming the efficient transport of chlorinated organics with SDS. After 14 days of operation, nearly 50% of the spiked lindane can be removed from the soil. Operation with large electric fields does not improve the performance of the treatment technology and results in lower current intensities and electro-osmotic fluxes and in higher evaporated water, despite the water content in the soil matrix, indicating the coexistence of multiple inputs in these processes.

Graphical abstract

Recent Developments in Advanced Oxidation Processes for Organics-Polluted Soil Reclamation

Soil pollution has become a substantial environmental problem which is amplified by overpopulation in different regions. In this review, the state of the art regarding the use of Advanced Oxidation Processes (AOPs) for soil remediation is presented. This review aims to provide an outline of recent technologies developed for the decontamination of polluted soils by using AOPs. Depending on the decontamination process, these techniques have been presented in three categories: the Fenton process, sulfate radicals process, and coupled processes. The review presents the achievements of, and includes some reflections on, the status of these emerging technologies, the mechanisms, and influential factors. At the present, more investigation and development actions are still desirable to bring them to real full-scale implementation.

Iron-carbon material enhanced electrokinetic remediation of PCBs-contaminated soil

The high toxicity and persistence of polychlorinated biphenyls (PCBs) in the environment demands the development of effective remediation for PCBs-contaminated soils. In this study, electrokinetic (EK) remediation integrated with iron-carbon material (Fe/C) was established and used to remediate PCB28 (1 mg kg^-1) contaminated soil under a voltage gradient of 1 V cm^-1. Effects of Fe/C dosage, soil type, and remediation time were investigated. The operational condition was optimized as 4 g kg^-1 Fe/C, yellow soil, and 14 d-remediation, achieving PCB28 removal efficiency of 58.6 ± 8.8% and energy utilization efficiency of 146.5. Introduction of EK-Fe/C did not significantly affect soil properties except for slight soil moisture content increase and total Fe content loss. Soil electrical conductivity exhibited an increasing trend from anode to cathode attributed to EK-induced electromigration and electroosmosis. EK accelerated the corrosion and consumption of reactive Fe⁰/Fe₃C in Fe/C by generating acid condition. Fe/C in turn effectively prevented EK-induced soil acidification and maintained soil neutral to weak alkaline condition. A synergistic effect between EK and Fe/C was revealed by the order of PCB28 removal efficiency-EK-Fe/C (58.6 ± 8.8%) > EK (37.7 ± 1.6%) > Fe/C (6.8 ± 5.0%). This could be primarily attributed to EK and Fe/C enhanced Fenton reaction, where EK promoted Fe/C dissolution and H₂O₂ generation. In addition to oxidation by Fenton reaction generated ·OH, EK-mediated electrochemical oxidation, Fe/C-induced reduction and migration of Fe/C adsorbed PCBs were all significant contributors to PCB28 removal in the EK-Fe/C system. These findings suggest that the combination of EK and Fe/C is a promising technology for remediation of organics-contaminated soil.

Sulfidated zero valent iron as a persulfate activator for oxidizing organophosphorus pesticides (OPPs) in aqueous solution and aged contaminated soil columns

Sulfidation treatment is an effective method of improving the catalytic performance of zero-valent iron (ZVI). Here, we prepared sulfidated, micro-sized ZVI (S-mZVI) using ball milling technology to activate persulfate (PS) with the goal of oxidizing organophosphorus pesticides (OPPs) in aqueous solution and aged OPP-contaminated soil columns. Energy dispersive spectroscopy (EDS), X-ray powder diffraction (XRD) and X-ray photoelectron spectrometry (XPS) analyses uncovered the formation of Fe₂O₃, FeOOH, FeS and FeS₂ in the S-mZVI prepared by ball milling with different proportions of elemental S powder to make micro-sized ZVI particles. The presence of sulfur can regulate the morphology of S-mZVI with a dispersed and spherical shape, and it can improve the activation performance of PS. In aqueous solution, 11.2 mg of S-mZVI activated 2.5 mM PS (S-mZVI-PS) with an S/Fe molar ratio of 0.100, and it was the best at activating PS, leading to oxidation-rate constants of 0.030 s^-1 for 10 mg/L phorate and 0.026 s^-1 for 10 mg/L terbufos, which were much greater than those of the other S-mZVI and mZVI. The results of the soil column experiment showed that the PS, which had a low consumption for the total dosage, achieved higher degradation percentages among the three OPPs in the S-mZVI-PS treatment than those in the mZVI-PS treatment over 120 h, with the best performance achieved by oxidizing 69.7% phorate, 48.0% terbufos and 60.6% aminoparathion. The effluent concentrations of the three OPPs in the S-mZVI-PS treatment were significantly lower than those in the mZVI-PS treatment, while dissolved total iron and Fe(II) displayed the opposite results. These results indicate that S-mZVI prepared by ball milling can effectively activate PS and be applied to remediate OPP-contaminated soil.

Biodegradability of di-(2-ethylhexyl) phthalate by a newly isolated bacterium Achromobacter sp. RX

Di-(2-ethylhexyl) phthalate (DEHP) is a chemical plasticizer that has been commonly used in the manufacture of polyvinyl chloride. DEHP is one of the environmental pollution sources. In this study, a gram-negative strain RX bacterium utilizing DEHP as sole carbon source was isolated from activated sludge through screening test. This strain RX was identified as Achromobacter sp. RX based on its morphology, physiological properties and 16S rRNA gene sequence analysis. The results showed that the optimal conditions for the DEHP degradation were 30.0 °C and pH 7.0. The DEHP degradation induced by strain RX demonstrated nitrogen source dependent, while followed a decreasing degradation rate under the source of: NO₃^- > NH₄⁺ > NO₂^-. The biodegradability of Achromobacter sp. RX was enhanced with Masson pine seed powder as a co-metabolic substrate and Tween-80 as a solubilizing agent. Meanwhile, the degrading kinetics analysis was performed in the condition of DEHP as sole carbon source. The DEHP degradation curves fitted well with the first-order kinetic model at 50-300 mg/L of DEHP, with the half-life ranging from 13.0 to 16.4 h. During the biodegradation of DEHP, mono-(2-ehtylhexyl) phthalate (MEHP) was firstly generated through de-esterification, followed by the formation of phthalic acid and benzoic acid after further de-esterification of MEHP. Benzoic acid was finally mineralized to CO₂ and H₂O. The decontamination of DEHP-contaminated soil by Achromobacter sp. RX was investigated using a rotating-drum bioreactor. Evolution of total organic carbon from the contaminated soil showed that 86.4%-91.7% of DEHP was mineralized at pH 7.0 and 30.0 °C within 96 h. Reusability of Achromobacter sp. RX and its lifetime were observed over six consecutive cycles. Thus, Achromobacter sp. RX possessed high DEHP biodegradability, which provided a good potential in dealing with DEHP-contaminated soil.

Microbial community responses to soil parameters and their effects on petroleum degradation during bio-electrokinetic remediation

This study evaluated the interactions among total petroleum hydrocarbons (TPH), soil parameters, and microbial communities during the bio-electrokinetic (BIO-EK) remediation process. The study was conducted on a petroleum-contaminated saline-alkali soil inoculated with petroleum-degrading bacteria with a high saline-alkali resistance. The results showed that the degradation of TPH was better explained by second-order kinetics, and the efficacy and sustainability of the BIO-EK were closely related to soil micro-environmental factors and microbial community structures. During a 98-d remediation process, the removal rate of TPH was highest in the first 35 d, and then decreased gradually in the later period, which was concurrent with changes in the soil physicochemical properties (conductivity, inorganic ions, pH, moisture, and temperature) and subsequent shifts in the microbial community structures. According to the redundancy analysis (RDA), TPH, soil temperature, and electric conductivity, as well as SO₄^2-, Cl^-, and K⁺ played a better role in explaining the changes in the microbial community at 0-21 d. However, pH and NO₃^- better explained the changes in the microbial community at 63-98 d. In particular, the dominant genera, Marinobacter and Bacillus, showed a positive correlation with TPH, conductivity, and SO₄^2-, Cl^-, and K⁺, but a negative relationship with pH and NO₃. Rhodococcus was positively correlated with soil temperature. The efficacy and sustainability of the BIO-EK remediation process is likely to be improved by controlling these properties.

DLLME-SFO-GC-MS procedure for the determination of 10 organochlorine pesticides in water and remediation using magnetite nanoparticles

There exists a high demand for fast, simple, and reliable methodologies for determining the presence of organochlorine pesticides (OCPs) on environmental samples. Moreover, the toxicity and accumulation of potential OCPs in several environments have led to the development of technologies that achieve their removal from contaminated waters. In this study, a novel method combining a dispersive liquid-liquid microextraction procedure based on the solidification of floating organic drop is developed and validated for the extraction, preconcentration, and determination of 10 OCPs: α-BHC, p,p'-DDE, δ-BHC, dieldrin, p,p'-DDT, endosulfan I, endosulfan sulfate, heptachlor, heptachlor epoxide (isomer B), and methoxychlor in water samples. The results show that the calibration curves were linear for all the studied compounds, and the coefficients of correlation higher than 0.99. The variation coefficient for precision and accuracy was lower than 10%, and the accuracy ranged from 93 to 105%. Low limit of detection and limit of quantification values ranging from 0.06-3.00 ng mL^-1 and 0.20-10 ng mL^-1 were obtained, respectively. The capability of the proposed method was confirmed using an analysis of the water samples before and after the degradation process; this was achieved by employing nanomaterials, while performing an analysis of 160 real samples that were sourced from a Brazilian river. A cobalt-doped magnetite was applied for the environmental remediation of the studied compounds, and it was verified that the novel material has the potential to be used in environmental remediation with a degradation efficiency exceeding 80% for the majority of the studied compounds.

Effects of Electrolyte pH on the Electro-Osmotic Characteristics in Anthracite

Accelerating the drainage of water in coal reservoirs can significantly improve the extraction efficiency of coalbed methane (CBM). The movement of water with different pH values in anthracite was tested and analyzed. The results showed that the electro-osmotic flow velocity increased first and then slightly decreased with the increase of time up to 120 h. The electro-osmotic flow was markedly strengthened under a strong acid (pH 2) or strong alkaline (pH 13) environment, and the direction of electro-osmosis was reversed at a pH of 3-4. The changes in zeta potential, surface groups, and minerals in anthracite were tested to analyze the mechanism of electro-osmotic characteristics. The results obtained from this work will provide a basis for the process of drainage and depressurization during the CBM extraction.

Oxygen Reduction Reaction in the Field of Water Environment for Application of Nanomaterials

Water pollution has caused the ecosystem to be in a state of imbalance for a long time. It has become a major global ecological and environmental problem today. Solving the potential hidden dangers of pollutants and avoiding unauthorized access to resources has become the necessary condition and important task to ensure the sustainable development of human society. To solve such problems, this review summarizes the research progress of nanomaterials in the field of water aimed at the treatment of water pollution and the development and utilization of new energy. The paper also tries to seek scientific solutions to environmental degradation and to create better living environmental conditions from previously published cutting edge research. The main content in this review article includes four parts: advanced oxidation, catalytic adsorption, hydrogen, and oxygen production. Among a host of other things, this paper also summarizes the various ways by which composite nanomaterials have been combined for enhancing catalytic efficiency, reducing energy consumption, recycling, and ability to expand their scope of application. Hence, this paper provides a clear roadmap on the status, success, problems, and the way forward for future studies.