ZSM-5-(C@Fe) activated peroxymonosulfate for effectively degrading ciprofloxacin: In-depth analysis of degradation mode and degradation path

Generation and identification of 1O2 in catalysts/peroxymonosulfate systems for water purification

Catalysts for peroxymonosulfate (PMS) activation are appealing in the purification of organic wastewater. Singlet oxygen (1O2) is widely recognized as a crucial reactive species for degrading organic contaminants in catalysts/PMS systems due to its adamant resistance to inorganic anions, high selectivity, and broad pH applicability. With the rapid growth of studies on 1O2 in catalysts/PMS systems, it becomes necessary to provide a comprehensive review of its current state. This review highlights recent advancements concerning 1O2 in catalysts/PMS systems, with a primary focus on generation pathways and identification methods. The generation pathways of 1O2 are summarized based on whether (distinguished by the geometric structures of metal species) or not (distinguished by the active sites) the metal element is included in the catalysts. Furthermore, this review thoroughly discusses the influence of metal valence states and metal species with different geometric structures on 1O2 generation. Various potential strategies are explored to regulate the generation of 1O2 from the perspective of catalyst design. Identification methods of 1O2 primarily include electron paramagnetic resonance (EPR), quenching experiments, reaction in D2O solution, and chemical probe tests in catalysts/PMS systems. The principles and applications of these methods are presented comprehensively along with their applicability, possible disagreements, and corresponding solutions. Besides, an identifying procedure on the combination of main identification methods is provided to evaluate the role of 1O2 in catalysts/PMS systems. Lastly, several perspectives for further studies are proposed to facilitate developments of 1O2 in catalysts/PMS systems.

Synergistic enhanced activation of peroxymonosulfate by heterojunction Co3O4-CuO@CN for removal of oxytetracycline: Performance, mechanism, and stability

Metal-organic frameworks (MOFs) as precursors for catalysts has drawn growing attentions. In this study, heterojunction Co3O4-CuO doped carbon materials (noted as Co3O4-CuO@CN) were prepared by direct carbonization of CuCo-MOF in air. It was found that the Co3O4-CuO@CN-2 exhibited excellent catalytic activity with the highest Oxytetracycline (OTC) degradation rate of 0.0902 min-1 at 50 mg/L of Co3O4-CuO@CN-2 dosage, 2.0 mM of PMS and 20 mg/L of OTC, which was 4.25 and 4.96 times that of CuO@CN and Co3O4@CN, respectively. Furthermore, Co3O4-CuO@CN-2 was efficient over a wide pH range (pH 1.9-8.4), and possessed good stability and reusability without OTC degradation decrease after five consecutive uses at pH 7.0. In a comprehensive analysis, the rapid regeneration of Cu(II) and Co(II) is responsible for their excellent catalytic performance, and the p-p heterojunction structure formed between Co3O4 and CuO acts as an intermediary of electron transfer to accelerate PMS decomposition. Moreover, it was interesting to find that Cu rather than Co species played a vital role in the PMS activation. The quenching experiments and electron paramagnetic resonance demonstrated that .OH, SO4•-, and 1O2 were the reactive species responsible for oxidation of OTC and the non-radical pathway triggered by 1O2 was dominant.

Stability performance analysis of Fe based MOFs for peroxydisulfates activation to effectively degrade ciprofloxacin

Fe-based metal-organic frameworks (MOFs) show high activity toward the activation of peroxodisulfate (PDS) for the removal of organic micropollutants (OMPs) in wastewater treatment. However, there is a phenomenon of Fe ion dissolution in the Fe-based MOFs' active PDS system, and the reasons and influencing factors that cause Fe ion dissolution are poorly understood. In this study, we synthesized four types of Fe-based MOFs and confirmed their crystal structure through characterization. All types of Fe-based MOFs were found to activate PDS and form sulfate radicals (SO4 -), which effectively remove OMPs in wastewater. During the process of Fe-based MOFs activating PDS for CIP removal, activated species, oxidant reagent, and pH negatively impact the stability performance of the MOFs' structure. The coordination bond between Fe atom and O atom can be attacked by water molecules, free radicals, and H+, causing damage to the crystal structure of MOFs. Additionally, Fe (II)-MOFs exhibit the best stability performance, due to the enhanced bond energy of the coordination bond in MOFs by the F ligands. This study summarizes the influencing factors of Fe-based MOFs' damage during PDS activation processes, providing new insights for the future development of Fe-based MOFs.

Revealing the synergistic mechanism of the generation, migration and nearby utilization of reactive oxygen species in FeOCl-MOF yolk-shell reactors

Fenton-like reactions is attractive for environmental pollutant control, but there is an urgent need to improve the utilisation of hydroxyl radicals (·OH) in practical applications. Here, for the first time, FeOCl is encapsulated within a Metal Organic Framework (MOF) (Materials of Institut Lavoisier-101 (MIL-101(Fe))) as a yolk-shell reactor (FeOCl-MOF) by in situ growth. The interaction between FeOCl and the MOF not only increases the electron density of FeOCl, but also shifts down the d-band centre. The increase of electron density could promote the efficient conversion of H₂O₂ to ·OH catalysed by FeOCl. And the shift of the d-band centre to the lower energy level facilitates the desorption of ·OH. Experimental and theoretical calculations showed that the high catalytic performance was attributed to the unique yolk-shell structure that concentrates the catalytic and adsorption sites in a confinement space, as well as the improved electron density and d-band centre for efficient generation, rapid desorption and utilized nearby of ·OH. Which is utilized nearby by the organic pollutants adsorbed by the surface MOF, thus greatly improving the effective conversion of H₂O₂ and the ·OH utilisation (from 25.5% (Fe²⁺/H₂O₂) to 77.1% (FeOCl-MOF/H₂O₂)). In addition, a catalytic reactor was constructed to achieve continuous efficient treatment of organic pollutants. This work provides a Fenton-like microreactor for efficient generation, rapid desorption, and nearby utilization of ·OH to improve future technologies for deep water purification in complex environments.

Regulating Interlayer Confinement FeOCl for Accelerating Polymerization of Pollutants to Reduce Carbon Emission in Water Purification

The spatial structure regulation of catalysts could optimize the reaction pathway and enhance the mass transfer kinetics, which might realize the efficient and low-consumption removal of pollutants in Fenton-like technology. In this study, N,N-dimethylformamide (DMF) intercalation was used to adjust the interlayer spacing of FeOCl from 7.90 to 11.84 Å by a simple and rapid intercalation method, thereby enhancing the mass transfer kinetics and altering the catalytic pathway. The removal rate of BPA in the DMF-FeOCl/PS system increased by 8.78 times, showing good resistance to complex water environments (such as pH, humic acid, and anions), especially in 5 g/L high-salt wastewater. The direct electron transfer processes between Fe(IV) and pollutants mediated by interlayer Fe sites generate phenoxy radicals, and the polymerization processes occur, achieving efficient removal of pollutants and low CO₂ emissions. This study provides new insight into the efficient and low-carbon treatment of high-salt wastewater.

Insight into advanced oxidation processes for the degradation of fluoroquinolone antibiotics: Removal, mechanism, and influencing factors

The enrichment and transport of antibiotics in the environments pose many potential hazards to aquatic animals and humans, which has become one of the public health challenges worldwide. As a widely used class of antibiotics, fluoroquinolones (FQs) generally accumulated in the environments as traditional sewage treatment plants cannot completely remove them. Advanced oxidation processes (AOPs) have been shown to be a promising method for the abatement of antibiotic contamination. In this review, influencing factors and relevant mechanisms of FQs removal by various AOPs were summarized. Compared with other AOPs, photocatalytic ozone may be considered as a cost-effective method for degrading FQs. Finally, the benefits and application restrictions of AOPs were discussed, along with proposed research directions to provide new insights into the control of FQs pollutant via AOPs in practical applications.

Peroxydisulfate activation by nano zero-valent iron graphitized carbon materials for ciprofloxacin removal: Effects and mechanism

Since the discovery of the potential hazards of ciprofloxacin (CIP) to the ecosystem and human health, there has been an urgent need to develop effective technologies to solve the severe issue. In this work, the nanozero-valent iron graphitized carbon matrix (xFe@CS-T_m) were prepared via a hydrothermal method to activate peroxydisulfate (PDS) for degradation of CIP. Specifically, 0.5Fe@CS-T₇ exhibited the excellent catalytic performance for PDS activation to degrade CIP. Moreover, the catalyst exhibited vigorous interference resistance at various pH values, in the presence of various inorganic anions and under humic acid conditions. The characterization results demonstrated that Fe was successfully embedded on the carbon matrix and became the active sites to promote ROS production. It is demonstrated that O₂^•- was the main active species rather than •OH and SO₄^•-, based on quench trapping, EPR experiments and steady state concentrations calculations. The possible pathways of CIP degradation were proposed using LC-MS results and density functional theory. The outcomes of the toxicity estimation software tool found that the toxicity of CIP was reduced. This study not only investigated a novel methodology for the degradation of antibiotic wastewater but also provides a feasible pathway for carbon-neutral wastewater treatment.

Modulated construction of Fe-based MOF via formic acid modulator for enhanced degradation of sulfamethoxazole：Design, degradation pathways, and mechanism

Metal-organic frameworks (MOFs) have attracted more attention because of their excellent environmental catalytic capabilities. Modulation approach as an advanced assistant strategy is vital essential to enhancing the performance of MOFs. In this study, the modulated method was used to successfully synthesize a group of Fe-based MOFs, with formic acid as the modulator on the synthesis mixture. The most modulated sample Fe-MOFs-2 exhibit high specific surface areas and higher catalytic activity, which could effectively degrade SMX via PS activation, with almost 95% removal efficiency within 120 min. The results revealed that the % RSE of modulated Fe-MOFs-2 increased from 2.31 to 3.27 when compared with the origin Fe-MOFs. This may be due to the addition of formic acid induces the formation of more coordinatively unsaturated metal sites in the catalyst, resulting in structural defects. In addition, the quenching experiment and EPR analysis verified SO₄^-·and·OH as the major active free radicals in the degradation process. Modulated Fe-MOFs-2 demonstrated good reusability and stability under fifth cycles. Finally, four possible degradation pathways and catalytic mechanism of Fe-MOFs-2 was tentatively proposed. Our work provides insights into the rational design of modulated Fe-MOFs as promising heterogeneous catalysts for advanced wastewater treatment.

Degradation of tris(2-chloroethyl) phosphate (TCEP) by thermally activated persulfate: Combination of experimental and theoretical study

Organophosphorus esters (OPEs), one kind of the emerging contaminants with high frequency of detection, is rather refractory in natural environment, thus posing great threat to human health. This study investigated the feasibility and mechanism of tris(2-chloroethyl) phosphate (TCEP) degradation in thermally activated persulfate (TAP) system. Influence of impact factors, such as PDS dosage, temperature, initial pH, and presence of natural water matrix (Cl^-, NO₃^-, H₂PO₄^-, NH₄⁺, humic acid), were evaluated. Results showed that 100% degradation of TCEP can be achieved in TAP system in 40 min at 60 °C. SO₄^·- as the dominant oxidant for TCEP degradation was proved by quenching experiment and verified by EPR analysis. Alkaline condition exerted great inhibitory effect by affecting the constituents of oxidative radicals. It is suggested that Cl^- and H₂PO₄^- at lower dosages promoted the degradation by stimulating ·OH production and forming oxidative radicals with better selectivity. Intermediates identified by high resolution mass spectrometer was suggested less toxic than TCEP by ECOSAR program. Meanwhile, the illustrated oxidation mechanism mainly involved radical attack at CCl bond and cleavage of CO bond, as further confirmed by frontier electron density calculation and wavefunction analysis. Moreover, cyclic degradation of TCEP indicated the constant release of SO₄^·- in 450 min, suggesting high efficiency and stability of PDS in TAP system. Four selected OPEs achieved complete removal in TAP system and their degradation discrepancy was further discussed based on the distinctive structures. Altogether, TAP technology can be used as an efficient method in TCEP removal with great potential for application.

Targeted degradation of TBBPA using novel molecularly imprinted polymer encapsulated C-Fe-Nx nanocomposite driven from MOFs

To improve the efficacy of organic pollutant removal using sulfate radicals, we designed MIP@C-Fe-Nx, a molecularly imprinted material capable of targeting the degradation of tetrabromobisphenol A (TBBPA), which can be used as both adsorbent and catalyst to recognize and degrade Tetrabromobisphenol A (TBBPA) accurately, and the final removal rate of TBBPA can reach 104.6 mg·g^-1. Based on the synergistic effects of MIP@C-Fe-Nx on the excellent organic pollutant recognition and catalytic performance, low concentrations of TBBPA can be pre-targeted, concentrated, and fixed on the surface of MIP, and degraded simultaneously in-situ by·OH and SO₄^•- which are produced by activating PS with C-Fe-Nx. Recognition experiments demonstrated that MIPs had perfect performance in recognizing and adsorbing TBBPA and debromination intermediates. The DFT calculations and HPLC-MS analysis indicated that MIP@C-Fe-Nx had a targeted recognition and accumulation for TBBPA and debromination intermediates, for example, dibromobisphenol A, monobromobisphenol A, and bisphenol A, thus avoid the formation of toxic intermediates causing secondary contamination.

Preparation, characterization, and applications of Fe-based catalysts in advanced oxidation processes for organics removal: A review

Fe-based catalysts as low-cost, high-efficiency, and non-toxic materials display superior catalytic performances in activating hydrogen peroxide, persulfate (PS), peracetic acid (PAA), percarbonate (PC), and ozone to degrade organic contaminants in aqueous solutions. They mainly include ferrous salts, zero-valent iron, iron-metal composites, iron sulfides, iron oxyhydroxides, iron oxides, and supported iron-based catalysts, which have been widely applied in advanced oxidation processes (AOPs). However, there is lack of a comprehensive review systematically reporting their synthesis, characterization, and applications. It is imperative to evaluate the catalytic performances of various Fe-based catalysts in diverse AOPs systems and reveal the activation mechanisms of different oxidants by Fe-based catalysts. This work detailedly summarizes the synthesis methods and characterization technologies of Fe-based catalysts. This paper critically evaluates the catalytic performances of Fe-based catalysts in diverse AOPs systems. The effects of solution pH, reaction temperature, coexisting ions, oxidant concentration, catalyst dosage, and external energy on the degradation of organic contaminants in the Fe-based catalyst/oxidant systems and the stability of Fe-based catalysts are also discussed. The activation mechanisms of various oxidants and the degradation pathways of organic contaminants in the Fe-based catalyst/oxidant systems are revealed by a series of novel detection methods and characterization technologies. Future research prospects on the potential preparation means of Fe-based catalysts, practical applications, assistive technologies, and impact in AOPs are proposed.

Tailored d-Band Facilitating in Fe Gradient Doping CuO Boosts Peroxymonosulfate Activation for High Efficiency Generation and Release of Singlet Oxygen

In the field of heterogeneous catalysis, limitations of the surface reaction process inevitably make improving the catalytic efficiency to remove pollutants in water a major challenge. Here, we report a unique structure of Fe surface-gradient-doped CuO that improves the overall catalytic processes of adsorption, electron transfer, and desorption. Interestingly, gradient doping leads to an imbalanced charge distribution in the crystal structure, thereby promoting the adsorption and electron transport efficiency of peroxymonosulfate (PMS). The orbital hybridization of Fe also improves the electronic activity. More importantly, the occupied d-orbital distribution is closer to the lower energy level, which improves the desorption of the reaction intermediate (¹O₂). As a result, the production and desorption of ¹O₂ have been improved, resulting in excellent BPA degradation ability (kinetic rate increased by 67.3 times). Two-dimensional infrared correlation spectroscopy is used to better understand the doping process and catalytic mechanism of Fe-CuO. Fe-O changes before Cu-O and is more active. The Fe-required active sites, active species intensity, and kinetic reaction rates show a good correlation. This research provides a scientific basis for expanding the purification of toxic organic pollutants in complex water environments by heterogeneous catalytic oxidation.

Peroxymonosulfate activation through 2D/2D Z-scheme CoAl-LDH/BiOBr photocatalyst under visible light for ciprofloxacin degradation

The synergistic effect between photocatalytic and peroxymonosulfate (PMS) activation has been widely applied in the field of sewage treatment. In this work, we synthesized a two-dimensional/two-dimensional (2D/2D) CoAl-LDH/BiOBr Z-scheme photocatalyst via a simple method. Then, multiple detection results demonstrated that CoAl-LDH was successfully anchored onto BiOBr, as well as formed an intimate interaction. Moreover, the photocatalytic degradation performance of the catalysts/PMS/vis system had been explored under several conditions (e.g., different catalyst doses, PMS doses, anions and pollutants). The 8 wt% CoAl-LDH/BiOBr composite exhibited the highest degradation efficiency (96%) of ciprofloxacin (CIP). In addition, radicals quenching experiments and electron paramagnetic resonance (EPR) indicated that •O₂- and ¹O₂ were the primary radicals for CIP degradation. The photoelectrochemical measurement and photoluminescence (PL) confirmed that 8 wt% CoAl-LDH/BiOBr exhibited the highest separation and transfer rate of charge carriers. The liquid chromatography-mass spectrometer (LC-MS) analysis revealed that oxidation of the piperazine ring and defluorination were the main CIP degradation pathways. Density functional theory (DFT) calculation, including the laplacian bond order (LBO) and Fukui index, which was consistent with the results of LC-MS. This study explained the superiority of the synergistic effect between photocatalysis and PMS activation on the degradation of pollutants.

Fe@C activated peroxymonosulfate system for effectively degrading emerging contaminants: Analysis of the formation and activation mechanism of Fe coordinately unsaturated metal sites

Carbon-encapsulated Fe nanocomposites (Fe@C), obtained by pyrolysis of metal-organic frameworks (MOFs), can activate peroxymonosulfate (PMS) to remove emerging contaminants (ECs). Unfortunately, the current MOFs-derived catalysts always inevitably produce more iron-oxide compounds that unfavorable for PMS activation. In this work, according to the thermogravimetric curve of Fe(II)-MOF-74, to discuss the role of pyrolysis temperature on the structural characteristics of Fe@C. The results demonstrated that Fe@C-4 could obtain abundant coordinately unsaturated metal sites and exhibited the best activation performance. Radical-quenching experiments and EPR measurements confirm that the generated sulfate radical (SO₄^-˙) and singlet oxygen (¹O₂) only degraded approximately 35% of TBBPA. Meanwhile, negatively charged complex intermediates formed by the weak interaction between Fe@C-4 and PMS was proposed as the dominant reactive species, and approximately 65% of TBBPA was degraded. This work optimizes the synthesis strategy and mechanism of Fe@C and provides a methodological reference for the design of Fe-based catalysts.

Advanced Oxidation Processes Based on Sulfate Radicals for Wastewater Treatment: Research Trends

In this work, the recent trends in the application of the sulfate radical-based advanced oxidation processes (SR-AOPs) for the treatment of wastewater polluted with emerging contaminants (ECs) and pathogenic load were systematically studied due to the high oxidizing power ascribed to these technologies. Additionally, because of the economic benefits and the synergies presented in terms of efficiency in ECs degradation and pathogen inactivation, the combination of the referred to AOPs and conventional treatments, including biological processes, was covered. Finally, the barriers and limitations related to the implementation of SR-AOPs were described, highlighting the still scarce full-scale implementation and the high operating-costs associated, especially when solar energy cannot be used in the oxidation systems.

In situ synthesis of FeOCl@MoS2 on graphite felt as novel electro-Fenton cathode for efficient degradation of antibiotic ciprofloxacin at mild pH

The traditional Electro-Fenton (EF) is an efficient technology for wastewater treatment but suffers from the acidic condition requirement and external catalyst addition. To overcome these challenges, a GF@MoS₂@FeOCl cathode was fabricated using a facile method. The as-prepared GF@MoS₂@FeOCl cathode showed excellent performance for ciprofloxacin (CIP) degradation in EF process with RuO₂/Ti electrode as the anode. H₂O₂ was electro-generated and activated on-site at the cathode at mild pH without adding Fe²⁺. CIP was 100% removed with 74.4% of mineralization in 90 min at pH 6. The GF@MoS₂@FeOCl cathode exhibited good reusability after consecutive runs of degradation. The degradation intermediates were investigated, and the possible mechanism was proposed. This work demonstrated that the prepared GF@MoS₂@FeOCl cathode is a promising candidate for contaminants treatment in an EF system.