Oriented oxidation of all alkanes in soils

Fast degradation of macro alkanes through activating indigenous bacteria using biosurfactants produced by Burkholderia sp

Soil bacteria that produce biosurfactants can use total petroleum hydrocarbons (TPHs) as a carbon source. This study demonstrated that biosurfactants produced by Burkholderia sp. enhanced the recovery and synergism of soil microbial community, resulting in fast degradation of macro alkanes. Experiments were carried out by applying bio-stimulation after pre-oxidation to investigate the effects of nutrient addition on biosurfactant production, TPH degradation, and microbial community succession in the soil. The results presented that bio-stimulation could produce biosurfactants in high C/N (32.6) and C/H (13.3) conversion after pre-oxidation and increased the total removal rate of TPH (10.59-46.71%). The number of total bacteria had a rapid increase trend (2.94-8.50 Log CFU/g soil). The degradation rates of macro alkanes showed a 4.0-fold (48.07 mg/kg·d^-1 versus 186.48 mg/kg·d^-1) increase, and the bioremediation time of degrading macro alkanes saved 166 days. Further characterization revealed that the biosurfactants produced by Burkholderia sp. could activate indigenous bacteria to degrade macro alkanes rapidly. A shift in phylum from Actinomycetes to Proteobacteria was observed during bioremediation. The average relative abundance of the microbial community increased from 36.24 to 64.96%, and the predominant genus tended to convert from Allorhizobium (8.57%) to Burkholderia (15.95%) and Bacillus (15.70%). The co-occurrence network and Pearson correlation analysis suggested that the synergism of microbial community was the main reason for the fast degradation of macro alkanes in petroleum-contaminated soils. Overall, this study indicated the potential of the biosurfactants to activate and enhance the recovery of indigenous bacteria after pre-oxidation, which was an effective method to remediate petroleum-contaminated soils.

Mechanistic insight into cost-effective dedicated oxidation of alkanes by inactivating soil organic matter with FeOOH formed in situ

Modified Fenton technique has been widely used to remediate soils contaminated with crude oil but significantly limited to soil organic matter (SOM) consuming oxidants. In this study, soils with developed SOM inactivation by FeOOH formed in situ were created and spiked with crude oil (total petroleum hydrocarbons (TPH): 19453 mg/kg), then treated by modified Fenton reagents. The reaction activity of hydroxyl radicals (•OH) relative to TPH (K) notably increased to 0.65 when the degree of developed inactivation of the SOM (β) was 100% (DIS-100), which was 1.45, 2.03 and 2.83-fold than that of DIS-50, DIS-15 and control (CK), respectively. Meanwhile, the higher the K, the more •OH transferred, which realized the efficient oriented oxidation of TPH. Moreover, improving the transfer of •OH from SOM to TPH was more important than increasing •OH production in soil remediation. With the β increasing to 100%, the ratio of invalid H₂O₂ decomposition to produce O₂ decreased to 22%, equal to 25% reduction compared to CK. Therefore, when β was 100%, the utilization efficiency of H₂O₂ was improved to 1.48 mg/mmol, which was approximately 1.39, 3.35 and 5.43-fold higher than the efficiency got by DIS-50, DIS-15 and CK, respectively, achieving the cost-effective dedicated oxidation of TPH. In addition, the FeOOH cross-linked with SOM via Fe-O-C and Fe-N bonds to develop inactivation of SOM. In general, this study highlighted a new insight into the effect of developed inactivation of SOM on soil remediation.

Recent progress on in-situ chemical oxidation for the remediation of petroleum contaminated soil and groundwater

Accidental oil leaks and spills can often result in severe soil and groundwater pollution. In situ chemical oxidation (ISCO) is a powerful and efficient remediation technology. In this review, the applications and recent advances of three commonly applied in-situ oxidants (hydrogen peroxide, persulfate, and permanganate), and the gap in remediation efficiency between lab-scale and field-scale applications is critically assessed. Feasible improvements for these measures, especially solutions for the 'rebound effect', are discussed. The removal efficiencies reported in 108 research articles related to petroleum-contaminated soil and groundwater were analyzed. The average remediation efficiency of groundwater (82.7%) by the three oxidants was higher than that of soil (65.8%). A number of factors, including non-aqueous phase liquids, adsorption effect, the aging process of contaminants, low-permeability zones, and vapor migration resulted in a decrease in the remediation efficiency and caused the residual contaminants to rebound from 19.1% of the original content to 57.7%. However, the average remediation efficiency of ISCO can be increased from 40.9% to 75.5% when combined with other techniques. In the future, improving the utilization efficiency of reactive species and enhancing the contact efficiency between oxidants and petroleum contaminants will be worthy of attention. Multi-technical combinations, such as the ISCO coupled with phase-transfer, viscosity control, controlled release or natural attenuation, can be effective methods to solve the rebound problem.

Efficient cyclic oxidation of macro long-chain alkanes in soil using Fenton oxidation with recyclable Fe

Recyclable Fe in soil was prepared by using fermented food waste supernatant. The efficient cyclic oxidation of long-chain alkanes in oil-contaminated soils could be achieved by Fenton oxidation with the recyclable Fe. The oxidation efficiency of macro long-chain alkanes (C₂₇-C₃₀) from the first cycle (63.4%) to the last cycle (60.1%) showed no significant decrease during three-cycle Fenton oxidation with the recyclable Fe. However, for the oil-absorbing Fe prepared by HA and Fe-SOM prepared by Cs, the oxidation efficiency of C₂₇-C₃₀ could not be efficiently cyclic oxidized during three-cycle Fenton oxidation. Further analysis showed that the proportion of Fe(III) in the recyclable Fe was higher than that in the oil-absorbing Fe or the Fe-SOM, where the iron content was similar. Moreover, more fulvic-like acid and humic-like acid were found in the recyclable Fe, and thus many Fe(III) ions simultaneously combined with the fulvic-like acid and humic-like acid through -C-O-C and C˭O bonds in the recyclable Fe. It was the recyclable Fe with such a stable structure that could still maintain high catalytic activity and efficiently cyclic oxidize macro long-chain alkanes during three-cycle Fenton oxidation, which is valuable for its repeated use.