Enhanced visible-light driven multi-photoredox Cr(VI) and p-cresol by Si and Zr interplay in fibrous silica-zirconia

Bandgap-Regulated Electrochemiluminescence Enhancement Strategy for Florfenicol Detection Based on ZrCuO3: A Multimodal Luminophore

The low electrochemiluminescence (ECL) efficiency issue of zirconia (ZrO2) has been a pressing problem since its discovery. In this study, a bandgap-regulated ECL enhancement strategy was developed to improve the ECL efficiency of ZrO2. Specifically, through the calcination of metal-organic frameworks (MOFs), the MOF-derived bimetallic oxide ZrCuO3 was synthesized. Compared to ZrO2, the synthesized ZrCuO3 exhibited a narrower bandgap and higher electron transfer efficiency, leading to enhanced ECL efficiency. Further investigation of the ECL emitter revealed that ZrCuO3 exhibited multimodal ECL emission: annihilation ECL and co-reactant participation ECL (including anodic ECL with tripropylamine as a co-reactant and cathodic ECL with K2S2O8 as a co-reactant). The anodic ECL with the highest efficiency was selected as the main mode for detecting the target in the aptasensor. Annihilation ECL and cathodic ECL served as alternative modes to ensure stability and continuity of the sensing system. Based on the bandgap-regulated strategy of ZrCuO3, a sensing chip with ITO as the working electrode was designed for the sensitive detection of florfenicol (FF). The constructed signal "off-on-off" aptasensor exhibited excellent detection performance for FF in the range of 0.0005-200 ng/mL. The proposed method provided a novel strategy for the analysis of other antibiotics or biomolecules.

Dendritic mesoporous nanoparticles for the detection, adsorption, and degradation of hazardous substances in the environment: State-of-the-art and future prospects

Equipped with hierarchical pores and three-dimensional (3D) center-radial channels, dendritic mesoporous nanoparticles (DMNs) make their pore volumes extremely large, specific surface areas super-high, internal spaces especially accessible, and so on. Other entities (like organic moieties or nanoparticles) can be modified onto the interfaces or skeletons of DMNs, accomplishing their functionalization for desirable applications. This comprehensive review emphasizes on the design and construction of DMNs-based systems which serve as sensors, adsorbents and catalysts for the detection, adsorption, and degradation of hazardous substances, mainly including the construction procedures of brand-new DMNs-based materials and the involved hazardous substances (like industrial chemicals, chemical dyes, heavy metal ions, medicines, pesticides, and harmful gases). The sensitive, adsorptive, or catalytic performances of various DMNs have been compared; correspondingly, the reaction mechanisms have been revealed strictly. It is honestly anticipated that the profound discussion could offer scientists certain enlightenment to design novel DMNs-based systems towards the detection, adsorption, and degradation of hazardous substances, respectively or comprehensively.

CuO improved energy band of AgO/fibrous SiO2-ZrO2 for optimized simultaneous photocatalytic redox of chromium (VI) and p-cresol using response surface methodology

Ternary CuO/AgO/FSZr photocatalysts were fabricated via the hydrothermal and electrochemical methods with three different CuO loading (1, 3 and 5 wt%), indicated as 1CuO/AgO/FSZr, 3CuO/AgO/FSZr and 5CuO/AgO/FSZr. The photocatalytic reaction was tested towards simultaneous chromium (VI) photoreduction and p-cresol photooxidation and the performance in order as follow: 3CuO/AgO/FSZr > 5CuO/AgO/FSZr > 1CuO/AgO/FSZr > AgO/FSZr > FSZr. CuO/AgO/FSZr photocatalysts showed an improvement in photocatalytic activity compared to AgO/FSZr and FSZr due to the reduction potential of chromium (VI) aligned closer to the conduction band of CuO and provided abundant free active electrons (e^-) and holes (h⁺) with efficient transportation and migration. Interestingly, the 3CuO/AgO/FSZr was established as the best photocatalyst with 98% reduction of chromium (VI) and 83% oxidation of p-cresol simultaneously, owing to its strong corporation between the metal oxides and support and higher total pore volume. The Langmuir-Hinshelwood model were employed for kinetics which followed the pseudo-first-order kinetics model well. Based on the simultaneous photocatalytic mechanism, chromium (VI) and p-cresol were directly reduced and oxidized by e^- and h⁺, respectively. The response surface methodology (RSM) discovered that the quadratic term initial concentration of chromium (VI) is the main significant factor in photocatalytic performance. The optimum parameters for simultaneous photoredox of chromium (VI) and p-cresol predicted from RSM are 9.6 mg L^-1 of chromium (VI) concentration, 9.8 mg L^-1 of p-cresol concentration and 0.32 g L^-1 of catalyst dosage. Under these conditions the error between the predicted and experimental values is only 3.7%. The 3CuO/AgO/FSZr sustained the photocatalytic performance after reused for five cycles and could oxidized various organic pollutants as well as reduced chromium (VI) simultaneously.

Extra-modification of zirconium dioxide for potential photocatalytic applications towards environmental remediation: A critical review

Photocatalytic degradation is a valuable direction for eliminating organic pollutants in the environment because of its exceptional catalytic activity and low energy requirements. As one of the prospective photocatalysts, zirconium dioxide (ZrO₂) is a promising candidate for photoactivity due to its favorable redox potential and higher chemical stability. ZrO₂ has a high rate of electron-hole recombination and poor light-harvesting capabilities. Still, modification has demonstrated enhancements, especially extra-modification, and is therefore worthy of investigation. This present review provides a comprehensive overview of the extra-modifications of ZrO₂ for enhanced photocatalytic performance, including coupling with other semiconductors, doping with metal, non-metal, and co-doping with metal and non-metal. The extra-modified ZrO₂ showed superior performance in degrading the organic pollutant, particularly dyes and phenolic compounds. Interestingly, this review also briefly highlighted the probable mechanisms of the extra-modification of ZrO₂ such as p-n heterojunction, type II heterojunction, and Z-scheme heterojunction. The latter heterojunction with excellent electron-hole space separation improved the photoactivity. Extensive research on ZrO₂'s photocatalytic potential is presented, including the removal of heavy metals, the redox of heavy metals and organic pollutants, and the evolution of hydrogen. Modified ZrO₂'s photocatalytic effectiveness depends on its band position, oxygen vacancy concentration, and metal defect sites. The opportunities and future problems of the extra-modified ZrO₂ photocatalyst are also discussed. This review aims to share knowledge regarding extra-modified ZrO₂ photocatalysts and inspire new environmental remediation applications.

Promoting a well-dispersion of MoO3 nanoparticles on fibrous silica catalyst via one-pot synthesis for enhanced photoredox environmental pollutants efficiency

The coexistence of pharmaceutical compounds and heavy metals in the aquatic environment has resulted in complications in the treatment process and thus, causing uproar among the citizens. The radical-based photocatalysis technology has aroused as an excellent method to eliminate both heavy metal and pharmaceutical compounds in the water. Herein, reported the utilization of the microemulsion technique for the preparation of nanoporous fibrous silica-molybdenum oxide (FSMo) towards simultaneous photocatalytic abatement of hexavalent chromium (Cr(VI)) and tetracycline (TC). The FESEM analysis showed the spherical morphology of the FSMo catalyst with dendrimeric silica fiber. The synthesized FSMo catalyst exhibited narrowed bandgap, high crystallinity, and well Mo element dispersion for enhanced photo-redox of Cr(VI) and TC. Remarkably, simultaneous remediation of the Cr(VI) and TC over FSMo demonstrated superior photocatalytic efficiency, 69% and 75%, respectively, than in the individual system, possibly due to the effective separation of photoinduced charges. The introduction of the Mo element to the silica framework via microemulsion technique demonstrated better dispersion of Mo compared to the incipient wetness impregnation method and thus, yielded higher photocatalytic activity towards simultaneous removal of TC and Cr(VI). Besides, quenching experiments revealed the electrons and holes as the active species that play a dominant role in the simultaneous photo-redox of Cr(VI) and TC. Lastly, the FSMo catalyst demonstrated high stability after four continuous cycles of simultaneous photocatalysis reactions, implying its potential as a suitable material for practical wastewater treatments.

Altered zirconium dioxide based photocatalyst for enhancement of organic pollutants degradation: A review

Heterogeneous advanced oxidation processes are a promising approach for cost-efficient removal of pollutants using semiconductors. Zirconium dioxide (ZrO₂) is an auspicious material for photocatalytic activity owning to its suitable bandgap, stability, and low cost. However, ZrO₂ suffers from fast recombination rate, and poor light harvesting ability. Nonetheless, extra modification has also shown improvements and therefore is worth investigating. The endeavour of this paper initially discusses the fundamentals with respect to reactive species, classification, and synthesis methods for ZrO₂. Furthermore, with particular consideration to stability and reusability, several additional modification approaches for ZrO₂-based photocatalysts such as doping and noble metals loading. Furthermore, the formation of heterojunctions has also been shown to boost photocatalytic activity while inhibiting charge carrier recombination. Finally, photocatalyst separation via magnetic-based photocatalysts are elucidated. As a result, ZrO₂-based photocatalysts are regarded as a promising emerging technology that warrants further development and research.

Integrated process approach for degradation of p-cresol pollutant under photocatalytic reactor using activated carbon/TiO2 nanocomposite: application in wastewater treatment

Over the years, biodegradation has been an effective technique for waste water treatment; however, it has its own limitations. In order to achieve a higher degradation efficacy, integrated processes are being focus in this area. Therefore, the present study is targeted towards the coupling of biodegradation and photocatalytic degradation of p-cresol. The biodegradation of p-cresol was performed via lab isolate Serratia marcescens ABHI001. The obtained results confirmed that ~85% degradation of p-cresol was accomplished using Serratia marcescens ABHI001 strain in 18 h. Consequently, degradation of remaining residue (remaining p-cresol concentration initially used) was also examined in a batch reactor using activated carbon-TiO₂ nanocomposite (AC/TiO₂-NC) as a catalyst under the exposure of UV radiation. The AC/TiO₂-NC was processed via sol-gel technique and characterized by various techniques, namely Brunauer-Emmett-Teller (BET), scanning electron microscope (SEM), X-ray diffraction (XRD), and Fourier transformed infrared spectroscopy (FT-IR). The investigation allowed p-cresol degradation further augment up to ~96% with the help of spectrophotometer trailed by high performance liquid chromatography (HPLC). This study demonstrates that integrated process (biodegradation-photodegradation) is the cost-effective bioremediation process to overcome such kinds of pollutant issues.

An intriguing Z-scheme titania loaded on fibrous silica ceria for accelerated visible-light-driven photocatalytic degradation of ciprofloxacin

A novel Z-scheme titania loaded on fibrous silica ceria (Ti-FSC) was triumphantly fabricated via hydrothermal followed by electrolysis method and evaluated for the visible-light degradation of ciprofloxacin (CIP). Noticeably, Ti-FSC exhibits as an efficient photocatalyst for CIP photodegradation with 95% as followed by titania loaded on fibrous silica (Ti-FS) (68%), Ti-CeO₂ (35%), FSC (47%), FS (22%), and CeO₂ (17%). The combination of the inherent merits of Ti loaded on FSC is able to realize the crucial role of Ce in harnessing the high dispersion of Ti, which could beneficial for improving the performance proven by XRD, FESEM, TEM and FTIR. Consequently, high dispersion of Ti on FSC has worthwhile towards the interaction of the Si-O-Ti, Ce-O-Ti, and Si-O-Ti, which could enhance the CIP photodegradation by providing more surface defects, narrowing the band gap, improving electron-hole separation and suppressing electron-hole recombination that revealed by XPS, UV-vis/DRS, Nyquist plots and PL studies, respectively. The scavenger study revealed that the controlling species in the system was hydroxyl radical and holes. A potential Z-scheme heterojunction mechanism for Ti-FSC was deduced from the band structure analysis. The possible photodegradation pathway was proposed based on GCMS analysis. Besides, the acceptable reusability, which exceeded 90% of degradation indicated the great application potential of Z-scheme Ti-FSC in wastewater treatment and others application.

New insight into the kinetic study on the different loadings of the CuO/CNT catalyst and its optimization for p-chloroaniline photodegradation

The effect of the copper (Cu) content on Cu oxide loaded onto a carbon nanotube (CuO/CNT) catalyst on the mechanistic, kinetic, and photonic efficiency of the photodegradation of p-chloroaniline (PCA) under visible (Vis) and ultraviolet (UV) light irradiation has been explored. For low-loading (1-5 wt%) CuO/CNTs, photodegradation performed better under UV (>84%) rather than the Vis system; this may be due to the presence of abundant defect sites on both CuO and CNTs, which allowed the multielectron reduction of oxygen at their impurity levels to generate more hydrogen peroxide and subsequent ·OH radicals. The active species under UV were in the following order: h⁺ ≫ e^- > ·OH, while it was vice versa for the Vis system with a well-balanced 50 wt% CuO/CNT catalyst that exhibited a similar performance. The kinetic study showed the transition of the kinetic order from the zeroth to the first order on increasing the PCA concentration under the Vis system and vice versa for the UV system. The Thiele modulus (ϕ) further confirmed that the effect of internal mass transfer was negligible under UV light. In contrast, the transition from mass transfer to kinetic control limitation was observed under the Vis system. The optimum PCA degradation predicted from the response surface analysis was 97.36% at the reaction pH of 7.3, catalyst dosage of 0.45 g L^-1, and initial PCA concentration of 11.02 mg L^-1. The condition obtained was fairly close to the forecasted value with an error of 0.26%.

A review on synergistic coexisting pollutants for efficient photocatalytic reaction in wastewater remediation

With the tremendous development of the economy and industry, the pollution of water is becoming more serious due to the excessive chemical wastes that need to remove thru reduction or oxidation reactions. Simultaneous removal of dual pollutants via photocatalytic redox reaction has been tremendously explored in the last five years due to effective decontamination of pollutants compared to a single pollutants system. In a photocatalysis mechanism, the holes in the valence band can remarkably promote the oxidation of a pollutant. At the same time, photoexcited electrons are also consumed for the reduction reaction. The synergistic between the reduction and oxidation inhibits the recombination of electron-hole pairs extending their lifetime. In this review, the binary pollutants that selectively removed via photocatalysis reduction or oxidation are classified according to heavy metal-organic pollutant (HM/OP), heavy metal-heavy metal (HM/HM) and organic-organic pollutants (OP/OP). The intrinsic between the pollutants was explained in three different mechanisms including inhibition of electron-hole recombination, ligand to metal charge transfer and electrostatic attraction. Several strategies for the enhancement of this treatment method which are designation of catalysts, pH of mixed pollutants and addition of additive were discussed. This review offers a recent perspective on the development of photocatalysis system for industrial applications.

Recent advances on nanocellulose biomaterials for environmental health photoremediation: An overview

As one of the potential bionanomaterials, nanocellulose has appeared as a favorable candidate for photoremediation of the environment because of its abundance in nature, inexpensive, eco-friendly, decomposable, high surface area, and outstanding mechanical properties. The current review carefully summarized the diverse type of nanocellulose, their preparation approaches, and several previous works on the use of nanocellulose for photoremediation. These include the role of nanocellulose for the increased surface active site of the hybrid photocatalysts by providing a large surface area for enhanced adsorption of photons and pollutant molecules, as a dispersing agent to increase distribution of metal/non-metal dopants photocatalysts, as well as for controlled size and morphology of the dopants photocatalysts. Furthermore, the recommendations for upcoming research provided in this review are anticipated to ignite an idea for the development of other nanocellulose-based photocatalysts. Other than delivering beneficial information on the present growth of the nanocellulose biomaterials photocatalysts, this review is expected will attract more interest to the utilization of nanocellulose photocatalyst and distribute additional knowledge in this exciting area of environmental photoremediation. This could be attained by considering that a review on nanocellulose biomaterials for environmental health photoremediation has not been described elsewhere, notwithstanding intensive research works have been dedicated to this topic.

A review on self-modification of zirconium dioxide nanocatalysts with enhanced visible-light-driven photodegradation of organic pollutants

Over the past few years, photocatalysis is one of the most promising approaches for removing organic pollutants. Zirconium dioxide (ZrO₂) has been shown to be effective in the photodegradation of organic pollutants. However, low photoresponse and fast electron-hole recombination of ZrO₂ affected the efficiency of catalytic performance. Modifying the photocatalyst itself (self-modification) is a prominent way to enhance the photoactivity of ZrO₂. Moreover, as ZrO₂-like photocatalysts have a large bandgap, improving the spectral response via self-modification could extend the visible light region and reduce the chance of recombination. Here, we review the self-modification of ZrO₂ for enhanced the degradation of organic pollutants. The approaches of the ZrO₂ self-modification, including the type of synthetic route and synthesis parameter variation, are discussed in the review. This will be followed by a brief section on the effect of ZrO₂ self-modification in terms of morphology, crystal structure, and surface defects for enhanced photodegradation efficiency. It also covers the discussion on the photocatalytic mechanism of ZrO₂ self-modification. Finally, some challenges with ZrO₂ catalysts are also discussed to promote new ideas to improve photocatalytic performance.

Simultaneous photocatalytic reduction of hexavalent chromium and oxidation of p-cresol over AgO decorated on fibrous silica zirconia

The co-existence of heavy metals and organic compounds including Cr(VI) and p-cresol (pC) in water environment becoming a challenge in the treatment processes. Herein, the synchronous photocatalytic reduction of Cr(VI) and oxidation of pC by silver oxide decorated on fibrous silica zirconia (AgO/FSZr) was reported. In this study, the catalysts were successfully developed using microemulsion and electrochemical techniques with various AgO loading (1, 5 and 10 wt%) and presented as 1, 5 and 10-AgO/FSZr. Catalytic activity was tested towards simultaneous photoredox of hexavalent chromium and p-cresol (Cr(VI)/pC) and was ranked as followed: 5-AgO/FSZr (96/78%) > 10-AgO/FSZr (87/61%) > 1-AgO/FSZr (47/24%) > FSZr (34/20%). The highest photocatalytic activity of 5-AgO/FSZr was established due to the strong interaction between FSZr and AgO and the lowest band gap energy, which resulted in less electron-hole recombination and further enhanced the photoredox activity. Cr(VI) ions act as a bridge between the positive charge of catalyst and cationic pC in pH 1 solution which can improve the photocatalytic reduction and oxidation of Cr(VI) and pC, respectively. The scavenger experiments further confirmed that the photogenerated electrons (e^-) act as the main species for Cr(VI) to be reduced to Cr(III) while holes (h⁺) and hydroxyl radicals are domain for photooxidation of pC. The 5-AgO/FSZr was stable after 5 cycles of reaction, suggesting its potential for removal of Cr(VI) and pC simultaneously in the chemical industries.

Green carbonaceous material‒fibrous silica-titania composite photocatalysts for enhanced degradation of toxic 2-chlorophenol

In this work, fibrous silica-titania (FST) was successfully prepared by the microemulsion method prior to the addition of three types of carbonaceous materials: graphitic-carbon nitride, g-C3N4 (CN), graphene nanoplatelets (GN), and multi-wall carbon nanotubes, MWCNT (CNT), via a solid-state microwave irradiation technique. The catalysts were characterized using XRD, FESEM, TEM, FTIR, UV-Vis DRS, N2 adsorption-desorption, XPS and ESR, while their photoactivity was examined on the degradation of toxic 2-chlorophenol (2-CP). The result demonstrated that the initial reaction rate was in the following order: CNFST (5.1 × 10^-3 mM min^-1) > GNFST (2.5 × 10^-3 mM min^-1) > CNTFST (2.3 × 10^-3 mM min^-1). The best performance was due to the polymeric structure of g-C3N4 with a good dispersion of C and N on the surface FST. This dispersion contributed towards an appropriate quantity of defect sites, as a consequence of the greater interaction between g-C3N4 and the FST support, that led to narrowed of band gap energy (2.98 eV to 2.10 eV). The effect of scavenger and ESR studies confirmed that the photodegradation over CNFST occurred via a Z-scheme mechanism. It is noteworthy that the addition of green carbonaceous materials on the FST markedly enhanced the photodegradation of toxic 2-CP.

Visible-Light-Responsive Nanofibrous α-Fe2O3 Integrated FeOx Cluster-Templated Siliceous Microsheets for Rapid Catalytic Phenol Removal and Enhanced Antibacterial Activity

Visible-light-driven environmental contaminants control using 2D photocatalytic nanomaterials with an unconfined reaction-diffusion path is advantageous for public health. Here, cost-effective siliceous composite microsheets (FeSiO-MS) combined with two distinct refined α-Fe₂O₃ nanospecies as photofunctional catalysts were constructed via a one-pot synthesis approach. Through precise control of Fe²⁺ precursor addition, specially configured α-Fe₂O₃ nanofibers combined with FeOx cluster-functionalized siliceous microsheets of ∼15 nm gradually evolved from the iron oxide-bearing molecular sieve, endowing a superior light-response characteristic of the formed nanocomposite. The catalytic experiment along with the ESR study demonstrated that the produced FeSiO-MS showed reinforced photo-Fenton reactivity, which was effective for rapid phenol degradation under visible light radiation. Moreover, the phenol removal process was found to be regulated by the specially configured types and concentrations of iron oxides. Notably, the obtained composites exhibited a considerable visible-light-induced bactericidal effect against E. coli. The constructed FeSiO-MS nanocomposites as integrated and eco-friendly photocatalysts exhibit enormous potentials for environmental and hygienic application.