Degradation of acesulfame in UV/monochloramine process: Kinetics, transformation pathways and toxicity assessment

Antibiotic ciprofloxacin removal from aqueous solutions by electrochemically activated persulfate process: Optimization, degradation pathways, and toxicology assessment

Ciprofloxacin (CIP) is a commonly used antibiotic in the fluoroquinolone group and is widely used in medical and veterinary medicine disciplines to treat bacterial infections. When CIP is discharged into the sewage system, it cannot be removed by a conventional wastewater treatment plant because of its recalcitrant characteristics. In this study, boron-doped diamond anode and persulfate were used to degrade CIP in an aquatic solution by creating an electrochemically activated persulfate (EAP) process. Iron was added to the system as a coactivator and the process was called EAP+Fe. The effects of independent variables, including pH, Fe2+, persulfate concentration, and electrolysis time on the system were optimized using the response surface methodology. The results showed that the EAP+Fe process removed 94% of CIP under the following optimum conditions: A pH of 3, persulfate/Fe2+ concentration of 0.4 mmol/L, initial CIP concentration 30 mg/L, and electrolysis time of 12.64 min. CIP removal efficiency was increased from 65.10% to 94.35% by adding Fe2+ as a transition metal. CIP degradation products, 7 pathways, and 78 intermediates of CIP were studied, and three of those intermediates (m/z 298, 498, and 505) were reported. The toxicological analysis based on toxicity estimation software results indicated that some degradation products of CIP were toxic to targeted animals, including fathead minnow, Daphnia magna, Tetrahymena pyriformis, and rats. The optimum operation costs were similar in EAP and EAP+Fe processes, approximately 0.54 €/m3.

Degradation behaviors of Nabumetone and its metabolite during UV/monochloramine process: Experimental and theoretical study

This study investigated degradation behaviors of a nonsteroidal anti-inflammatory drug Nabumetone (NMT) and its major metabolite 6-methoxy-2-naphthylacetic acid (MNA) in the coupling process of ultraviolet and monochloramine (UV/NH2Cl). The second-order rate constants of the contaminants reacting with reactive radicals (HO•, Cl•, Cl2•⁻, and CO3•⁻) were determined by laser flash photolysis experiments. HO• and Cl• contributed predominantly with 52.3% and 21.7% for NMT degradation and 60.8% and 22.3% for MNA degradation. The presence of chlorides retarded the degradation of NMT, while promoted the destruction of MNA, which was ascribed to the photosensitization effects of MNA under UV irradiation. Density functional theory (DFT) calculations revealed that radical adduct formation (RAF) was dominant pathway for both HO• and Cl• reacting with the contaminants, and hydrogen atom transfer (HAT) preferred to occur on side chains of NMT and MNA. NMT reacted with NO2• through single electron transfer (SET) with the second-order rate constant calculated to be 5.35 × 107 (mol/L)-1 sec-1, and the contribution of NO2• was predicted to be 13.0% of the total rate constant of NMT in pure water, which indicated that NO2• played a non-negligible role in the degradation of NMT. The acute toxicity and developmental toxicity of NMT were enhanced after UV/NH2Cl treatment, while those of MNA were alleviated. The transformation products of both NMT and MNA exhibited higher mutagenicity than their parent compounds. This study provides a deep understanding of the mechanism of radical degradation of NMT and MNA in the treatment of UV/NH2Cl.

Ultraviolet activation of monochloramine to treat contaminants of emerging concern: reactions, operating parameters, byproducts, and opportunities

The presence of CECs in aquatic systems has raised significant concern since they are potentially harmful to the environment and human health. Eliminating CECs has led to the development of alternatives to treat wastewater, such as advanced oxidation processes (AOPs). The ultraviolet-mediated activation of monochloramine (UV/NH2Cl) is a novel and relatively unexplored AOPs for treating pollutants in wastewater systems. This process involves the production of amino radicals (•NH2) and chlorine radicals (Cl•) from the UV irradiation of NH2Cl. Studies have demonstrated its effectiveness in mitigating various CECs, exhibiting advantages, such as the potential to control the amount of toxic disinfection byproducts (TDBPs) formed, low costs of reagents, and low energy consumption. However, the strong influence of operating parameters in the degradation efficiency and existence of NH2Cl, the lack of studies of its use in real matrices and techno-economic assessments, low selectivity, and prolonged treatment periods must be overcome to make this technology more competitive with more mature AOPs. This review article revisits the state-of-the-art of the UV/NH2Cl technology to eliminate pharmaceutical and personal care products (PPCPs), micropollutants from the food industry, pesticides, and industrial products in aqueous media. The reactions involved in the production of radicals and the influence of operating parameters are covered to understand the formation of TDBPs and the main challenges and limitations of the UV/NH2Cl to degrade CECs. This review article generates critical knowledge about the UV/NH2Cl process, expanding the horizon for a better application of this technology in treating water contaminated with CECs.

Hybrid radical coupling during MnO2-mediated transformation of a mixture of organic UV filters: Chemistry and toxicity assessment

Manganese oxide (MnO2) is one of the most abundant metal oxides, and it is renowned for its ability to degrade various phenolic micropollutants. However, under MnO2-mediated transformation, BP-3 transforms into 12 different radical-coupled transformation products (TPs) out of 15 identified TPs. These radical-coupled TPs are reported with adverse environmental impacts. This study explored the effects of MnO2 on organic UV filter mixtures and different water constituents (i.e., bicarbonate ion (HCO3-), humic acid (HA) and halide ions) in terms of degradation efficiency and transformation chemistry. When a mixture of benzophenone-3 (BP-3) and avobenzone (AVO) underwent transformation by MnO2, hybrid radical-coupled TPs derived from both organic UV filters were generated. These hybrid radical-coupled TPs were evaluated by an in silico prediction tool and Vibrio fischeri bioluminescence inhibition assay (VFBIA). Results showed that these TPs were potentially toxic to aquatic organisms, even more so than their parent compounds. The higher the concentration of HCO3-, HA, chloride ion (Cl-) and bromide ion (Br-), the greater the reduction in the efficiencies of degrading BP-3 and AVO. Contrastingly, in the presence of iodide ion (I-), degradation efficiencies of BP-3 and AVO were enhanced; however, iodinated TPs and iodinated radical-coupled TPs were formed, with questionable toxicity. This study has revealed the environmental risks of hybrid radical-coupled TPs, iodinated TPs and iodinated radical-coupled TPs when the organic UV filters BP-3 and AVO are transformed by MnO2.

UV-induced photodegradation of emerging para-phenylenediamine quinones in aqueous environment: Kinetics, products identification and toxicity assessments

Substituted para-phenylenediamine quinones (PPD-quinones) are a class of emerging contaminants frequently detected in the aqueous environment. One of them, N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6PPD-Q), was found to cause acute toxicities to aquatic species at extremely low environmental levels. The ubiquitousness and ecotoxicity of such pollutants underscore the importance of their transformation and elimination. In this work, we demonstrated effective removals of five PPD-quinones in aqueous environments under UV irradiation, with up to 94% of 6PPD-Q eliminated after a 40-min treatment. By applying high-resolution mass spectrometry (HRMS) non-targeted screening in combination with isotope labeling strategies, a total of 22 transformation products (TPs) were identified. Coupling with the time-based dynamic patterns, potential transformation mechanisms were identified as an •OH-induced photocatalysis reaction involving bond cleavage, hydroxylation, and oxidation. Computational toxicity assessment predicted lower aquatic toxicity of the TPs than their parent PPD-quinones. Our results in parallel evidenced an obvious reduction of PPD-quinones accompanied by the presence of their TPs in the effluent after UV disinfection in real municipal wastewater. This work builds a comprehensive understanding of the fate, transformation products, and related toxicological characteristics of emerging PPD-quinone contaminants in the aqueous environment.

Acesulfame degradation by thermally activated persulfate: Kinetics, transformation products and estimated toxicity

The existence of the artificial sweetener acesulfame (ACE) in quantities of significance can negatively impact water quality, and its consumption has been associated with deleterious health effects. The present investigation explores the efficacy of heat-activated sodium persulfate (SPS) for eliminating ACE. The complete degradation of 0.50 mg L-1 of ACE was achieved within 45 min under a reaction temperature of 50 °C and 100 mg L-1 of SPS. The impact of thermal decomposition on ACE at a temperature of 60 °C was negligible. This study considers several factors, such as the SPS and ACE loading, the reaction temperature, the initial pH, and the water matrix of the reactor. The results indicate that the method's efficiency is positively correlated with higher initial concentrations of SPS, whereas it is inversely associated with the initial concentration of ACE. Furthermore, higher reaction temperatures and acidic initial pH levels promote the degradation of acesulfame. At the same time, certain constituents of the water matrix, such as humic acid, chlorides, and bicarbonates, can hinder the degradation process. Additionally, the data from LC-QToF-MS analysis of the samples were used to investigate transformation through suspect and non-target screening approaches. Overall, ACE's eight transformation products (TPs) were detected, and a potential ACE decomposition pathway was proposed. The concentration of TPs followed a volcano curve, decreasing in long treatment times. The ecotoxicity of ACE and its identified TPs was predicted using the ECOSAR software. The majority of TPs exhibited not harmful values.

Hazardous radical-coupled transformation products of benzophenone-3 formed during manganese dioxide treatment

Radical-coupled transformation products (TPs) have been identified as the byproducts of various transformation processes, including both natural attenuation and artificial treatments, of phenolic micropollutants. Benzophenone-3 (BP-3), an organic UV filter of emerging concern, has been previously reported with ubiquitous occurrence in the natural environment and water bodies. Current research has demonstrated how TPs are formed from BP-3 when it is treated with manganese oxide (MnO2). The ecological and toxicological risks of these TPs have also been assessed. Polymerization of BP-3 through radical coupling was observed as the major pathway by which BP-3 is transformed when treated with MnO2. These radical-coupled TPs haven't shown further degradation after formation, suggesting their potential persistence once occurred in the environment. In silico experiments predict the radical-coupled TPs will increase in mobility, persistence and ecotoxicity. If true, they also represent an ever-increasing threat to the environment, ecosystems and, most immediately, aquatic living organisms. In addition, radical-coupled TPs produced by MnO2 transformation of BP-3 have shown escalated estrogenic activity compared to the parent compound. This suggests that radical coupling amplifies the toxicological impacts of parent compound. These results provide strong evidence that radical-coupled TPs with larger molecular sizes are having potential adverse impacts on the ecosystem and biota.

Chlorination of bisphenols in water: Understanding the kinetics and formation mechanism of 2-butene-1,4-dial and analogues

While it is widely accepted that 2-butene-1,4-dial (BDA) is a toxic metabolite with genotoxic and carcinogenic properties, little is known about BDA and its analogues (BDAs) formation during water disinfection. In this study, the effects of different chlorination conditions on the formation of BDAs from bisphenol and its analogues (BPs analogues) were evaluated. A transformation pathway for the formation of BDAs upon chlorination of BPs analogues is proposed. The time profile of the transformation of BPs analogues into BDAs reveals that the generation of dichlorohydroquinone, dichloro-hydroxybenzenesulfonic acid and 2,4,6-trichlorophenol, are significantly associated with the formation of BDAs in the disinfected water. Owing to the different bridging groups contributing to the electrophilicity of BPs analogues in varying degrees, the stronger the electrophilicity of BPs analogues the more BDAs are formed. In addition, the type of BDAs produced is also affected. Four types of BDAs were detected in this study, one of which was newly identified. This study confirms that BPs analogues are an important source of BDAs and provides more insights into the formation of BDAs during chlorination. Greater attention should be given to the formation of BDAs in chlorinated water and their potential threat to humans and the ecosystem.

Insight into the degradation of ciprofloxacin by medium-pressure UV-activated monochloramine process

The degradation efficiency and mechanisms of ciprofloxacin (CIP), a typical antibiotic, by a medium-pressure ultraviolet/chloramine (MPUV/NH₂Cl) treatment were investigated. The results showed that CIP degradation by MPUV/NH₂Cl was significantly higher than that by NH₂Cl oxidation and MPUV photolysis, and that this degradation processes were consistent with pseudo-first-order kinetics. The initial CIP concentration (7.5-30.2 μM) and the presence of HCO₃^- (0.5-10 mM) significantly inhibited CIP degradation with k_obs,CIP 0.0090-0.0069 and 0.0078-0.0048 cm²/mJ. In contrast, NO₃^- (50-500 μM) and Br^- (0.5-10 mM) significantly promoted the degradation with k_obs,CIP 0.0078-0.0102 and 0.0078-0.0124 cm²/mJ. The effect of Cl^- (0.5-10 mM) and natural organic matter (1-5 mg/L) were negligible. The NH₂Cl dosage (30-60 μM) presented a dual effect, in which its increase within the optimal concentration range (30-40 μM) accelerated CIP degradation due to the formation of reactive radicals, whereas an excessive increase (40-60 μM) quenched the free radicals, ultimately quenching the free radicals and inhibiting the degradation. The optimum pH for CIP degradation under MPUV/NH₂Cl treatment was 7.0. The contribution of reactive halogen species (i.e., reactive chlorine species and reactive nitrogen species) to CIP degradation was substantially greater than that of hydroxyl radicals under acidic or neutral conditions. We identified the degradation products of CIP and proposed degradation pathways, which included defluorination and cracking of the piperazine ring, with the latter being dominant. Compared to haloacetic acid (HAA) and nitrogenous disinfection byproducts (N-DBPs), MPUV/NH₂Cl significantly reduced trihalomethane (THM) production and theoretical cytotoxicity by 80.1% and 78.4% respectively, compared to the background experiment in natural water at a UV dose of 300 mJ/cm².

Micropollutant abatement by the UV/chloramine process in potable water reuse: A review

The need in using reclaimed water increased significantly to address the water shortage and its continuing quality deterioration in sustaining societal development. Degrading micropollutants in wastewater treatment plant effluents is one of the most important tasks in supplying safe drinking water, which is often achieved by full advanced treatment technologies (FATs), including reverse osmosis (RO) and the UV-based advanced oxidation process (AOP). As an emerging AOP, UV/chloramine process shows many noteworthy advantages in the scenario of potable water reuse, including membrane biological fouling control by chloramine, producing highly reactive radicals (e.g., Cl^•, HO^•, Cl₂^•-, and reactive nitrogen-containing species) to degrade the RO permeated pollutants, and acting as long-lasting disinfectant in the potable water distribution system. In addition, chloramine is often designedly produced by taking advantage of the ammonia in source. Thus, UV/chloramine processes gather much attention from researcher and published papers on UV/chloramine process have drastically increased since 2016, which were thoroughly reviewed in this paper. The fundamentals of chloramine photolysis, including the photolysis kinetics, the quantum yield, the generation and transformation of radicals and the final products, were scrutinized. Further, the impacts of reaction conditions such as pH, chloramine dosage and water matrix on the degradation of micropollutants by the UV/chloramine process are discussed. Moreover, the formation potential of disinfection by-products is debated. The opportunity of application of the UV/chloramine process in real-world practice is also presented, emphasizing the need for extensive efforts to remove currently prevalent knowledge roadblocks.

Ultraviolet-Light-emitting-diode activated monochloramine for the degradation of carbamazepine: Kinetics, mechanisms, by-product formation, and toxicity

Monochloramine (NH₂Cl) oxidant combined with a Ultraviolet (UV)-Light-emitting-diode (LED) light source forms a new advanced oxidation process (AOP), which can achieve high-efficiency degradation of carbamazepine (CBZ). The degradation of CBZ displayed pseudo-first-order reaction kinetics (R² > 0.98, k_CBZ = 0.0043 cm² mJ^-1 at pH 7). The degradation of CBZ was dependent on UV-LED wavelength, with maximum degradation efficiency observed at 265 nm since it was the lowest wavelength studied among UV-LEDs. Variation in pH across the range, which might be expected under normal environmental conditions (pH 6-8), and the presence of Cl^- had no significant effect on the degradation efficiency of CBZ, while the presence of HCO₃^- and natural organic matter (NOM) inhibited degradation. Electron paramagnetic resonance (EPR) experiments detected OH in the system. Probe compounds were used to distinguish the contribution of reactive chlorine species (RCS). It was proved that OH and Cl played major roles and OH was responsible for around 50% of the observed degradation of CBZ. Eight transformative products (TPs) in the degradation process of CBZ were identified, with a generally decreasing toxicity. The concentration of disinfection by-products (DBPs) formed during CBZ degradation was all within limits of WHO and China standard for drinking water. Although the concentration of nitrogen-containing DBPs (N-DBPs) was the lowest, N-DBPs were the main contributors to toxicity, and these would require more attention in practical applications. UV-LED/NH₂Cl AOP was identified as an effective way to degrade pharmaceutically active compounds.

Misconceptions about the Chemistry of Aqueous Chlorine Atoms and HClOH•(aq), and a Revised Mechanism for the Photochemical Peroxydisulfate/Chloride Reaction

It is widely considered that aqueous chlorine atoms (Cl•) convert to the species HClOH• with a half life of about 3 µs and that this species plays an important role...

Comparative physicochemical properties and toxicity of organic UV filters and their photocatalytic transformation products

Transformation products (TPs) of micropollutants contaminating our water resources have become an emerging issue due to the potential threats they pose to environmental and human health. This study investigated the transformation chemistry, toxicity, physicochemical properties and environmental behavior resulting from photocatalytic transformation of organic UV filters as model micropollutants. 3-Benzylidene camphor (3-BC), 4-hydroxybenzophenone (4-HB) and octocrylene (OC) were effectively degraded by UV-A/TiO₂ treatment, with TPs identified and characterized with high resolution mass spectrometry. Nitrated-TPs were observed to be formed in the presence of nitrite and nitrate for 3-BC and 4-HB, suggesting that the transformation process could be altered by components in the water matrix. Vibrio fischeri bioluminescence inhibition assay revealed an increase in toxicity of TPs derived from photocatalytic treatment, with quantitative structure-activity relationship model (ECOSAR) predicted an enhanced toxicity of individual TPs' after transformation. Assessment of physicochemical properties and environmental behavior suggested that TPs as compared to parent organic UV filters, may represent even greater hazards due to their increased water solubility, persistence and mobility - in addition to retaining the parent organic UV filter's toxicity. The results provide important information relevant to the potential risks for the selected organic UV filters, and their corresponding transformation products.

Acesulfame K Photodegradation over Nitrogen-Doped TiO2

Acesulfame K is a zero-calorie alternative to sugar used worldwide. There is contradictory information on the toxicity of the compound, but its accumulation in the aquatic environment is undeniable. In this study, one-pot sol-gel synthesis was used to obtain nitrogen-doped TiO2 photocatalysts. Doping up to 6.29 wt % of nitrogen caused an increase in the surface area of the catalysts (48.55–58.23 m2∙g−1) and a reduction of the pHPZC value (5.72–5.05). Acesulfame K photodegradation was tested at the initial concentration of 20–100 ppm and the catalyst concentration at the level of 1 g∙L−1. Compared to the pure anatase, 4.83–6.29 wt % nitrogen-doped TiO2 showed an effective photodegradation of Acesulfame K. Ninety percent molecule removal was obtained after ~100 min, ~90 min, and ~80 min for initial concentrations of 20 ppm, 50 ppm, and 100 ppm, respectively. The increased activity of the catalysts is due to the modification of the TiO2 lattice structure and probably the limitation of the photogenerated electron/hole charge carrier recombination. It was shown that the electrostatic interactions between Acesulfame K and the catalyst surface play an important role in the photodegradation efficiency.