Facet-dependent gold nanocrystals for effective photothermal killing of bacteria

An NIR-propelled janus nanomotor with enhanced ROS-scavenging, immunomodulating and biofilm-eradicating capacity for periodontitis treatment

Periodontitis is an inflammatory disease caused by bacterial biofilms, which leads to the destruction of periodontal tissue. Current treatments, such as mechanical cleaning and antibiotics, struggle to effectively address the persistent biofilms, inflammation, and tissue damage. A new approach involves developing a Janus nanomotor (J-CeM@Au) by coating cerium dioxide-doped mesoporous silica (CeM) with gold nanoparticles (AuNPs). This nanomotor exhibits thermophoretic motion when exposed to near-infrared (NIR) laser light due to the temperature gradient produced by the photothermal effects of asymmetrically distributed AuNPs. The NIR laser provides the energy for propulsion and activates the nanomotor's antibacterial properties, allowing it to penetrate biofilms and kill bacteria. Additionally, the nanomotor's ability to scavenge reactive oxygen species (ROS) can modulate the immune response and create a regenerative environment, promoting the healing of periodontal tissue. Overall, this multifunctional nanomotor offers a promising new approach for treating periodontitis by simultaneously addressing biofilm management and immune modulation with autonomous movement.

Stability and SERS signal strength of laser-generated gold, silver, and bimetallic nanoparticles at different KCl concentrations

Noble metal nanoparticles, specifically gold and silver, are extensively utilized in sensors, catalysts, surface-enhanced Raman scattering (SERS), and optical-electronic components due to their unique localized surface plasmon resonance (LSPR) properties. The production of these nanoparticles involves various methods, but among the environmentally friendly approaches, laser ablation stands out as it eliminates the need for toxic chemicals during purification. However, nanoparticle aggregation poses a challenge in laser ablation, necessitating the addition of extra materials that contaminate the otherwise clean process. In this study, we investigate the effectiveness of a biocompatible material, potassium chloride (KCl), in preventing particle aggregation. Although salt is known to trigger aggregation, we observed that certain concentrations of KCl can slow down this process. Over an eight-week period, we examined the aggregation rate, extinction behavior, and stability of gold, silver, and hybrid nanoparticles generated in different KCl concentrations. Extinction spectra, SEM images, SERS signal strength, and zeta potential were analyzed. Our results demonstrate that laser ablation in water and salt solutions yields nanoparticles with a spherical shape and a negative zeta potential. Importantly, we identified the optimal concentration of potassium chloride salt that maintains solution stability and SERS signal strength. Adsorbed chloride ions on silver nanoparticles were evidenced by low-frequency SERS band near 242 cm-1. A better understanding of the effect of KCl concentration on the properties of noble metal nanoparticles can lead to improved generation protocols and the development of tailored nanoparticle systems with enhanced stability and SERS activity.

Ti3C2T x -AuNP based paper substrates for label-free SERS detection of bacteria and multimodal antibacterials

Bacterial infections have become a serious global health problem due to the misuse of antibiotics which causes the emergence of antibiotic-resistant strains. Photothermal therapy (PTT) has been widely studied in recent years as a method to combat the development of bacterial resistance. However, PPT may cause damage to the human body due to excessive laser power. Therefore, it is important and urgent to develop a multifunctional platform that can sensitively detect bacteria and effectively inhibit or kill bacteria at low laser power. Herein, a novel multifunctional paper substrate of Ti3C2T x -AuNP was successfully synthesized by a self-assembly and freeze-drying method for bacterial detection and photothermal sterilization at low laser power. The typical Gram-negative Escherichia coli (E. coli) and the Gram-positive Methicillin-resistant Staphylococcus aureus (MRSA) were used as models to perform label-free, rapid and sensitive detection of bacteria based on the surface-enhanced Raman spectroscopy (SERS) method with detection limits as low as 105 CFU mL-1 and 5 × 105 CFU mL-1, respectively, demonstrating the paper substrate's ability to detect bacteria with sensitivity and accuracy. The paper substrate of Ti3C2T x -AuNP exhibits significant antibacterial effects when irradiated with 808 nm light at a low laser power of only 300 mW cm-2 and a short irradiation time of 5 minutes, and the germicidal rates for E. coli and MRSA were 99.94% and 92.71%, respectively. At the same time, the paper substrate of Ti3C2T x -AuNP also produces a variety of reactive oxygen species under 808 nm laser irradiation, resulting in photodynamic therapy (PDT). Accordingly, this paper substrate of Ti3C2T x -AuNP can not only sensitively detect bacteria, but also has photothermal and photodynamic sterilization, providing a promising countermeasure for the clinical treatment of diseases caused by multidrug-resistant bacteria.

Recent progress on bismuth-based light-triggered antibacterial nanocomposites: Synthesis, characterization, optical properties and bactericidal applications

Bacterial infections pose a seriously threat to the safety of the environment and human health. In particular, the emergence of drug-resistant pathogens as a result of antibiotic abuse and high trauma risk has rendered conventional therapeutic techniques insufficient for treating infections by these so-called "superbugs". Therefore, there is an urgent need to develop highly efficient and environmentally-friendly antimicrobial agents. Bismuth-based nanomaterials with unique structures and physicochemical characteristics have attracted considerable attention as promising antimicrobial candidates, with many demonstratingoutstanding antibacterial effects upon being triggered by broad-spectrum light. These nanomaterials have also exhibited satisfactory energy band gaps and electronic density distribution with improved photonic properties for extensive and comprehensive applications after being modified through various engineering methods. This review summarizes the latest research progress made on bismuth-based nanomaterials with different morphologies, structures and compositions as well as the different methods used for their synthesis to meet their rapidly increasing demand, especially for antibacterial applications. Moreover, the future prospects and challenges regarding the application of these nanomaterials are discussed. The aim of this review is to stimulate interest in the development and experimental transformation of novel bismuth-based nanomaterials to expand the arsenal of effective antimicrobials.

Research progress of metal-organic framework nanozymes in bacterial sensing, detection, and treatment

The high efficiency and specificity of enzymes make them play an important role in life activities, but the high cost, low stability and high sensitivity of natural enzymes severely restrict their application. In recent years, nanozymes have become convincing alternatives to natural enzymes, finding utility across diverse domains, including biosensing, antibacterial interventions, cancer treatment, and environmental preservation. Nanozymes are characterized by their remarkable attributes, encompassing high stability, cost-effectiveness and robust catalytic activity. Within the contemporary scientific landscape, metal-organic frameworks (MOFs) have garnered considerable attention, primarily due to their versatile applications, spanning catalysis. Notably, MOFs serve as scaffolds for the development of nanozymes, particularly in the context of bacterial detection and treatment. This paper presents a comprehensive review of recent literature pertaining to MOFs and their pivotal role in bacterial detection and treatment. We explored the limitations and prospects for the development of MOF-based nanozymes as a platform for bacterial detection and therapy, and anticipate their great potential and broader clinical applications in addressing medical challenges.

Zebrafish Insights into Nanomaterial Toxicity: A Focused Exploration on Metallic, Metal Oxide, Semiconductor, and Mixed-Metal Nanoparticles

Nanomaterials are widely used in various fields, and ongoing research is focused on developing safe and sustainable nanomaterials. Using zebrafish as a model organism for studying the potentially toxic effects of nanomaterials highlights the importance of developing safe and sustainable nanomaterials. Studies conducted on nanomaterials and their toxicity and potential risks to human and environmental health are vital in biomedical sciences. In the present review, we discuss the potential toxicity of nanomaterials (inorganic and organic) and exposure risks based on size, shape, and concentration. The review further explores various types of nanomaterials and their impacts on zebrafish at different levels, indicating that exposure to nanomaterials can lead to developmental defects, changes in gene expressions, and various toxicities. The review also covers the importance of considering natural organic matter and chorion membranes in standardized nanotoxicity testing. While some nanomaterials are biologically compatible, metal and semiconductor nanomaterials that enter the water environment can increase toxicity to aquatic creatures and can potentially accumulate in the human body. Further investigations are necessary to assess the safety of nanomaterials and their impacts on the environment and human health.

Predictable and adjustable broadband gold nanorods for photothermal effects and foldable performances

Colloidal gold nanorods (GNRs) have demonstrated their potential to absorb light within specific wavelength bands and induce photothermal effects. However, the unpredictability and lack of adjustability in the broadband spectrum formed by the self-assembly of gold nanospheres or the coupling of various sizes of GNRs have posed significant challenges. To address this, we have developed broadband GNRs (BGNRs) with a predictable and adjustable extinction band in the visible and near-infrared regions. The BGNRs were synthesized by simply mixing GNRs with different aspect ratios, allowing for control over the bandwidths and positions of the extinction bands. Subsequently, the BGNRs were coated with silica and underwent surface modification. The resulting BGNRs@SiO2were then mixed with either polydimethylsiloxane (PDMS) or polyvinylidene fluoride (PVDF) to create BGNRs@SiO2/PDMS (or PVDF) films. The BGNRs@SiO2/PDMS and BGNRs@SiO2/PVDF films both exhibit excellent photothermal performance properties. Additionally, the light absorption intensity of the BGNRs@SiO2/PVDF film linearly increases upon folding, leading to significantly enhanced photothermal performance after folding. This work demonstrates that plasmonic colloidal GNRs, without the need for coupling, can yield predictable and adjustable extinction bands. This finding holds great promise for future development and practical applications, particularly in the transfer of these properties to films.

Size-dependent magnetomechanically enhanced photothermal antibacterial effect of Fe3O4@Au/PDA nanodurian

The global health crisis of bacterial resistance to antibiotics requires innovative antibacterial strategies. One promising solution is the exploitation of multifunctional nanoplatforms based on non-resistant antibacterial mechanisms. This work reports a novel Fe3O4@Au/polydopamine (PDA) nanodurian with excellent photothermal-magnetomechanic synergistic antibacterial effects. The one-step formed Au/PDA hybrid shell provides good photothermal properties and spiky surfaces for enhanced magnetomechanic effects. Upon near-infrared (NIR) irradiation, the Fe3O4@Au/PDA nanodurian (200 μg mL-1) achieved nearly 100% antibacterial effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The efficiency of photothermal antimicrobial activity was further enhanced by the application of a rotating magnetic field (RMF), with the sterilization efficiency being increased by up to more than a half compared to the action alone. Interestingly, the size of the nanodurian has a significant impact on the synergistic sterilization effect, with larger particles showing a superior performance due to stronger chain-like structures in the magnetic field. Finally, the Fe3O4@Au/PDA nanodurian also demonstrates effective biofilm removal, with larger particles exhibiting the best eradication effect under the photothermal-magnetomechanic treatment. Overall, this magnetic field enhanced photothermal antibacterial strategy provides a promising broad-spectrum antimicrobial solution to combat bacterial infections. Thus, it possesses great potential in future nanomedicine and pollution treatment.

Size and charge effects of metal nanoclusters on antibacterial mechanisms

Nanomaterials, specifically metal nanoclusters (NCs), are gaining attention as a promising class of antibacterial agents. Metal NCs exhibit antibacterial properties due to their ultrasmall size, extensive surface area, and well-controlled surface ligands. The antibacterial mechanisms of metal NCs are influenced by two primary factors: size and surface charge. In this review, we summarize the impacts of size and surface charge of metal NCs on the antibacterial mechanisms, their interactions with bacteria, and the factors that influence their antibacterial effects against both gram-negative and gram-positive bacteria. Additionally, we highlight the mechanisms that occur when NCs are negatively or positively charged, and provide examples of their applications as antibacterial agents. A better understanding of relationships between antibacterial activity and the properties of metal NCs will aid in the design and synthesis of nanomaterials for the development of effective antibacterial agents against bacterial infections. Based on the remarkable achievements in the design of metal NCs, this review also presents conclusions on current challenges and future perspectives of metal NCs for both fundamental investigations and practical antibacterial applications.

Preparation and characterization of spiked gold nanobipyramids and its antibacterial effect on methicillin-resistant Staphylococcus aureus and methicillin-sensitive Staphylococcus aureus

BACKGROUND

This paper reports the preparation of a new family of spiked gold nanoparticles, spiked gold nanobipyramids (SNBPs). This protocol includes the process to synthesize gold nanobipyramids (NBPs) using combined seed-mediated and microwave-assisted method and procedure to form spikes on whole surface of gold nanobipyramid. We also evaluated the antibacterial activity against both methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-sensitive Staphylococcus aureus (MSSA) in various concentrations of SNBPs and NBPs by well diffusion assay, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) determination. The effect of SNBPs on exposed bacteria was observed by scanning electron microscopy.

RESULTS

The UV-Vis of purified NBPs exhibited two absorption bands located at 550 nm and 849 nm with yield of bipyramidal particles more than 90%. The average size of NBPs was 76.33 ± 10.11 nm in length and 26.57 ± 2.25 nm in diameter, respectively, while SNBPs were prolongated in length and achieved 182.37 ± 21.74 nm with multi-branches protruding whole surface areas. In antibacterial evaluations, SNBPs and NBPs showed antibacterial activity with MIC of 6.25 μl/ml and 12.5 μl/ml, respectively, for MSSA while 12.5 μl/ml and 25 μl/ml, respectively, for MRSA. Besides, MBC values of SNBPs and NBPs were found to be 12.5 μl/ml and 25 μl/ml, respectively, against MSSA while 25 μl/ml and 50 μl/ml, respectively, against MRSA. Furthermore, scanning electron microscopy observation showed the mechanism that SNBPs damaged the outer membrane, released cytoplasm, and altered the normal morphology of MRSA and MSSA, leading to bacterial death.

CONCLUSIONS

This report suggests that these SNBPs are potential antibacterial agents that can be applied as antibacterial materials to inhibit the growth of human bacterial pathogen infections related to antibiotic-resistant bacteria.

Photothermal/Photoacoustic Therapy Combined with Metal-Based Nanomaterials for the Treatment of Microbial Infections

The increased spread and persistence of bacterial drug-resistant phenotypes remains a public health concern and has contributed significantly to the challenge of combating antibiotic resistance. Nanotechnology is considered an encouraging strategy in the fight against antibiotic-resistant bacterial infections; this new strategy should improve therapeutic efficacy and minimize side effects. Evidence has shown that various nanomaterials with antibacterial performance, such as metal-based nanoparticles (i.e., silver, gold, copper, and zinc oxide) have intrinsic antibacterial properties. These antibacterial agents, such as those made of metal oxides, carbon nanomaterials, and polymers, have been used not only to improve antibacterial efficacy but also to reduce bacterial drug resistance due to their interaction with bacteria and their photophysical properties. These nanostructures have been used as effective agents for photothermal therapy (PTT) and photodynamic therapy (PDT) to kill bacteria locally by heating or the controlled production of reactive oxygen species. Additionally, PTT or PDT therapies have also been combined with photoacoustic (PA) imaging to simultaneously improve treatment efficacy, safety, and accuracy. In this present review, we present, on the one hand, a summary of research highlighting the use of PTT-sensitive metallic nanomaterials for the treatment of bacterial and fungal infections, and, on the other hand, an overview of studies showing the PA-mediated theranostic functionality of metal-based nanomaterials.

Recent Progress of Photothermal Therapy Based on Conjugated Nanomaterials in Combating Microbial Infections

Photothermal therapy has the advantages of non-invasiveness, low toxicity, simple operation, a broad spectrum of antibacterial ability, and non-proneness to developing drug resistance, which provide it with irreplaceable superiority in fighting against microbial infection. The effect of photothermal therapy is closely related to the choice of photothermal agent. Conjugated nanomaterials are potential candidates for photothermal agents because of their easy modification, excellent photothermal conversion efficiency, good photostability, and biodegradability. In this paper, the application of photothermal agents based on conjugated nanomaterials in photothermal antimicrobial treatment is reviewed, including conjugated small molecules, conjugated oligomers, conjugated polymers, and pseudo-conjugated polymers. At the same time, the application of conjugated nanomaterials in the combination of photothermal therapy (PTT) and photodynamic therapy (PDT) is briefly introduced. Finally, the research status, limitations, and prospects of photothermal therapy using conjugated nanomaterials as photothermal agents are discussed.

Gold-Based Nanostructures for Antibacterial Application

Bacterial infections have become a fatal threat because of the abuse of antibiotics in the world. Various gold (Au)-based nanostructures have been extensively explored as antibacterial agents to combat bacterial infections based on their remarkable chemical and physical characteristics. Many Au-based nanostructures have been designed and their antibacterial activities and mechanisms have been further examined and demonstrated. In this review, we collected and summarized current developments of antibacterial agents of Au-based nanostructures, including Au nanoparticles (AuNPs), Au nanoclusters (AuNCs), Au nanorods (AuNRs), Au nanobipyramids (AuNBPs), and Au nanostars (AuNSs) according to their shapes, sizes, and surface modifications. The rational designs and antibacterial mechanisms of these Au-based nanostructures are further discussed. With the developments of Au-based nanostructures as novel antibacterial agents, we also provide perspectives, challenges, and opportunities for future practical clinical applications.

Trends in Photothermal Nanostructures for Antimicrobial Applications

The rapid development of antimicrobial resistance due to broad antibiotic utilisation in the healthcare and food industries and the non-availability of novel antibiotics represents one of the most critical public health issues worldwide. Current advances in nanotechnology allow new materials to address drug-resistant bacterial infections in specific, focused, and biologically safe ways. The unique physicochemical properties, biocompatibility, and wide range of adaptability of nanomaterials that exhibit photothermal capability can be employed to develop the next generation of photothermally induced controllable hyperthermia as antibacterial nanoplatforms. Here, we review the current state of the art in different functional classes of photothermal antibacterial nanomaterials and strategies to optimise antimicrobial efficiency. The recent achievements and trends in developing photothermally active nanostructures, including plasmonic metals, semiconductors, and carbon-based and organic photothermal polymers, and antibacterial mechanisms of action, including anti-multidrug-resistant bacteria and biofilm removal, will be discussed. Insights into the mechanisms of the photothermal effect and various factors influencing photothermal antimicrobial performance, emphasising the structure-performance relationship, are discussed. We will examine the photothermal agents' functionalisation for specific bacteria, the effects of the near-infrared light irradiation spectrum, and active photothermal materials for multimodal synergistic-based therapies to minimise side effects and maintain low costs. The most relevant applications are presented, such as antibiofilm formation, biofilm penetration or ablation, and nanomaterial-based infected wound therapy. Practical antibacterial applications employing photothermal antimicrobial agents, alone or in synergistic combination with other nanomaterials, are considered. Existing challenges and limitations in photothermal antimicrobial therapy and future perspectives are presented from the structural, functional, safety, and clinical potential points of view.

A novel electrochemical sensor based on gold nanobipyramids and poly-L-cysteine for the sensitive determination of trilobatin

Trilobatin is a flavonoid that has wide application prospects due to its various pharmacological effects, such as anti-inflammation and anti-oxidation. In this work, a novel electrochemical sensor based on gold nanobipyramids (AuNBs) and L-cysteine (L-cys) was constructed for the sensitive and selective determination of trilobatin. The AuNBs, which were prepared by a seed-mediated growth method, had large specific surface areas and excellent electrical conductivity. A layer of L-cys film, which provided more active sites through the amino and hydroxyl groups, was modified on the surface of the AuNBs by electropolymerization. Significantly, the Au-S bond between the L-cys film and AuNBs could improve the stability of the sensor and it exhibited satisfactory electrocatalytic oxidation activity for trilobatin. Under optimized conditions, the sensor based on poly-L-cys/AuNBs/GCE was used to determine trilobatin by differential pulse voltammetry (DPV). Two wide linear ranges between the current peak and the concentration of trilobatin were obtained in the range from 5 to 100 μM and 100 to 1000 μM, and the low detection limit (LOD) was up to 2.55 μM (S/N = 3). The sensor demonstrated desirable reproducibility, stability, and selectivity and was applied to detect real trilobatin samples extracted from Lithocarpus polystachyus Rehd.'s leaves, showing recoveries of 98.36%-104.96%, with satisfactory results.

Construction of a bioactive copper-based metal organic framework-embedded dual-crosslinked alginate hydrogel for antimicrobial applications

Metal-organic frameworks (MOFs) containing bioactive metals have the potential to exhibit antimicrobial activity by releasing metal ions or ligands through the cleavage of metal-ligand bonds. Recently, copper-based MOFs (Cu-MOFs) with sustained release capability, porosity, and structural flexibility have shown promising antimicrobial properties. However, for clinical use, the controlled release of Cu²⁺ over an extended time period is crucial to prevent toxicity. In this study, we developed an alginate-based antimicrobial scaffold and encapsulated MOFs within a dual-crosslinked alginate polymer network. We synthesized Cu-MOFs containing glutarate (Glu) and 4,4'-azopyridine (AZPY) (Cu(AZPY)-MOF) and encapsulated them in an alginate-based hydrogel through a combination of visible light-induced photo and calcium ion-induced chemical crosslinking processes. We confirmed Cu(AZPY)-MOF synthesis using scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, and thermogravimetric analysis. This antimicrobial hydrogel demonstrated excellent antibacterial and antifungal properties against two bacterial strains (MRSA and S. mutans, with >99.9 % antibacterial rate) and one fungal strain (C. albicans, with >78.7 % antifungal rate) as well as negligible cytotoxicity towards mouse embryonic fibroblasts, making it a promising candidate for various tissue engineering applications in biomedical fields.

Iron Oxide@Mesoporous Silica Core-Shell Nanoparticles as Multimodal Platforms for Magnetic Resonance Imaging, Magnetic Hyperthermia, Near-Infrared Light Photothermia, and Drug Delivery

The design of core-shell nanocomposites composed of an iron oxide core and a silica shell offers promising applications in the nanomedicine field, especially for developing efficient theranostic systems which may be useful for cancer treatments. This review article addresses the different ways to build iron oxide@silica core-shell nanoparticles and it reviews their properties and developments for hyperthermia therapies (magnetically or light-induced), combined with drug delivery and MRI imaging. It also highlights the various challenges encountered, such as the issues associated with in vivo injection in terms of NP-cell interactions or the control of the heat dissipation from the core of the NP to the external environment at the macro or nanoscale.

Optical Processes behind Plasmonic Applications

Plasmonics is a revolutionary concept in nanophotonics that combines the properties of both photonics and electronics by confining light energy to a nanometer-scale oscillating field of free electrons, known as a surface plasmon. Generation, processing, routing, and amplification of optical signals at the nanoscale hold promise for optical communications, biophotonics, sensing, chemistry, and medical applications. Surface plasmons manifest themselves as confined oscillations, allowing for optical nanoantennas, ultra-compact optical detectors, state-of-the-art sensors, data storage, and energy harvesting designs. Surface plasmons facilitate both resonant characteristics of nanostructures and guiding and controlling light at the nanoscale. Plasmonics and metamaterials enable the advancement of many photonic designs with unparalleled capabilities, including subwavelength waveguides, optical nanoresonators, super- and hyper-lenses, and light concentrators. Alternative plasmonic materials have been developed to be incorporated in the nanostructures for low losses and controlled optical characteristics along with semiconductor-process compatibility. This review describes optical processes behind a range of plasmonic applications. It pays special attention to the topics of field enhancement and collective effects in nanostructures. The advances in these research topics are expected to transform the domain of nanoscale photonics, optical metamaterials, and their various applications.

Plasmonic visible-near infrared photothermal activation of olefin metathesis enabling photoresponsive materials

Light-induced catalysis and thermoplasmonics are promising fields creating many opportunities for innovative research. Recent advances in light-induced olefin metathesis have led to new applications in polymer and material science, but further improvements to reaction scope and efficiency are desired. Herein, we present the activation of latent ruthenium-based olefin metathesis catalysts via the photothermal response of plasmonic gold nanobipyramids. Simple synthetic control over gold nanobipyramid size results in tunable localized surface plasmon resonance bands enabling catalyst initiation with low-energy visible and infrared light. This approach was applied to the ROMP of dicyclopentadiene, affording plasmonic polymer composites with exceptional photoresponsive and mechanical properties. Moreover, this method of catalyst activation was proven to be remarkably more efficient than activation through conventional heating in all the metathesis processes tested. This study paves the way for providing a wide range of photoinduced olefin metathesis processes in particular and photoinduced latent organic reactions in general by direct photothermal activation of thermally latent catalysts.

Development of pH-Sensitive Magnetoliposomes Containing Shape Anisotropic Nanoparticles for Potential Application in Combined Cancer Therapy

Late diagnosis and systemic toxicity associated with conventional treatments make oncological therapy significantly difficult. In this context, nanomedicine emerges as a new approach in the prevention, diagnosis and treatment of cancer. In this work, pH-sensitive solid magnetoliposomes (SMLs) were developed for controlled release of the chemotherapeutic drug doxorubicin (DOX). Shape anisotropic magnetic nanoparticles of magnesium ferrite with partial substitution by calcium (Mg_0.75Ca_0.25Fe₂O₄) were synthesized, with and without calcination, and their structural, morphological and magnetic properties were investigated. Their superparamagnetic properties were evaluated and heating capabilities proven, either by exposure to an alternating magnetic field (AMF) (magnetic hyperthermia) or by irradiation with near-infrared (NIR) light (photothermia). The Mg_0.75Ca_0.25Fe₂O₄ calcined nanoparticles were selected to integrate the SMLs, surrounded by a lipid bilayer of DOPE:Ch:CHEMS (45:45:10). DOX was encapsulated in the nanosystems with an efficiency above 98%. DOX release assays showed a much more efficient release of the drug at pH = 5 compared to the release kinetics at physiological pH. By subjecting tumor cells to DOX-loaded SMLs, cell viability was significantly reduced, confirming that they can release the encapsulated drug. These results point to the development of efficient pH-sensitive nanocarriers, suitable for a synergistic action in cancer therapy with magnetic targeting, stimulus-controlled drug delivery and dual hyperthermia (magnetic and plasmonic) therapy.

Multifunctional Mesoporous Silica-Coated Gold Nanorods Mediate Mild Photothermal Heating-Enhanced Gene/Immunotherapy for Colorectal Cancer

Colorectal cancer (CRC) is the third most common cancer worldwide and the second leading cause of cancer-related deaths in the world. It is urgent to search for safe and effective therapies to address the CRC crisis. The siRNA-based RNA interference targeted silencing of PD-L1 has extensive potential in CRC treatment but is limited by the lack of efficient delivery vectors. In this work, the novel cytosine-phosphate-guanine oligodeoxynucleotides (CpG ODNs)/siPD-L1 co-delivery vectors AuNRs@MS/CpG ODN@PEG-bPEI (ASCP) were successfully prepared by two-step surface modification of CpG ODNs-loading and polyethylene glycol-branched polyethyleneimine-coating around mesoporous silica-coated gold nanorods. ASCP promoted dendritic cells (DCs) maturation by delivering CpG ODNs, exhibiting excellent biosafety. Next, mild photothermal therapy (MPTT) mediated by ASCP killed tumor cells and released tumor-associated antigens, further promoting DC maturation. Furthermore, ASCP exhibited mild photothermal heating-enhanced performance as gene vectors, resulting in an increased PD-L1 gene silencing effect. Enhanced DCs maturity and enhanced PD-L1 gene silencing significantly promoted the anti-tumor immune response. Finally, the combination of MPTT and mild photothermal heating-enhanced gene/immunotherapy effectively killed MC38 cells, leading to strong inhibition of CRC. Overall, this work provided new insights into the design of mild photothermal/gene/immune synergies for tumor therapy and may contribute to translational nanomedicine for CRC treatment.

Molecular Plasmonic Silver Forests for the Photocatalytic-Driven Sensing Platforms

Structural electronics, as well as flexible and wearable devices are applications that are possible by merging polymers with metal nanoparticles. However, using conventional technologies, it is challenging to fabricate plasmonic structures that remain flexible. We developed three-dimensional (3D) plasmonic nanostructures/polymer sensors via single-step laser processing and further functionalization with 4-nitrobenzenethiol (4-NBT) as a molecular probe. These sensors allow ultrasensitive detection with surface-enhanced Raman spectroscopy (SERS). We tracked the 4-NBT plasmonic enhancement and changes in its vibrational spectrum under the chemical environment perturbations. As a model system, we investigated the sensor's performance when exposed to prostate cancer cells' media over 7 days showing the possibility of identifying the cell death reflected in the environment through the effects on the 4-NBT probe. Thus, the fabricated sensor could have an impact on the monitoring of the cancer treatment process. Moreover, the laser-driven nanoparticles/polymer intermixing resulted in a free-form electrically conductive composite that withstands over 1000 bending cycles without losing electrical properties. Our results bridge the gap between plasmonic sensing with SERS and flexible electronics in a scalable, energy-efficient, inexpensive, and environmentally friendly way.

MIPs-SERS Sensor Based on Ag NPs Film for Selective Detection of Enrofloxacin in Food

The quinolone antibiotics represented by enrofloxacin (ENRO) are harmful to the ecological environment and human health due to illegal excessive use, resulting in increasing food residues and ENRO levels in the environment. To this end, we developed a MIPs-SERS method using surface-enhanced Raman spectroscopy (SERS) and molecularly imprinted polymers (MIPs) to detect ENRO in food matrices. Firstly, a layer of silver nanoparticles (Ag NPs) with the best SERS effect was synthesized on the surface of copper rods as the enhancing material by in situ reductions, and then MIPs targeting ENRO were prepared by the native polymerization reaction, and the MIPs containing template molecules wrapped on the surface of silver nanoparticle films (Ag NPs-MIPs) were obtained. Our results showed that the Ag NPs-MIPs could specifically identify ENRO from the complex environment. The minimum detection limit for ENRO was 0.25 ng/mL, and the characteristic peak intensity of ENRO was linearly correlated to the concentration with a linear range of 0.001~0.1 μg/mL. The experimental results showed that in comparison to other detection methods, the rapid detection of ENRO in food matrices using Ag NPs-MIPs as the substrate is reliable and offers a cost-effective, time-saving, highly selective, and sensitive method for detecting ENRO residues in real food samples.

Plasmonic Phenomena in Membrane Distillation

Water scarcity raises important concerns with respect to human sustainability and the preservation of important ecosystem functions. To satisfy water requirements, seawater desalination represents one of the most sustainable solutions. In recent decades, membrane distillation has emerged as a promising thermal desalination process that may help to overcome the drawbacks of traditional desalination processes. Nevertheless, in membrane distillation, the temperature at the feed membrane interface is significantly lower than that of the bulk feed water, due to the latent heat flux associated with water evaporation. This phenomenon, known as temperature polarization, in membrane distillation is a crucial issue that could be responsible for a decay of about 50% in the initial transmembrane water flux. The use of plasmonic nanostructures, acting as thermal hotspots in the conventional membranes, may improve the performance of membrane distillation units by reducing or eliminating the temperature polarization problem. Furthermore, an efficient conversion of light into heat offers new opportunities for the use of solar energy in membrane distillation. This work summarizes recent developments in the field of plasmonic-enhanced solar evaporation with a particular focus on solar-driven membrane distillation applications and its potential prospects.

Antibacterial Activity of Nanostructured Zinc Oxide Tetrapods

Zinc oxide (ZnO) tetrapods as microparticles with nanostructured surfaces show peculiar physical properties and anti-infective activities. The aim of this study was to investigate the antibacterial and bactericidal properties of ZnO tetrapods in comparison to spherical, unstructured ZnO particles. Additionally, killing rates of either methylene blue-treated or untreated tetrapods and spherical ZnO particles for Gram-negative and Gram-positive bacteria species were determined. ZnO tetrapods showed considerable bactericidal activity against Staphylococcus aureus, and Klebsiella pneumoniae isolates, including multi-resistant strains, while Pseudomonas aeruginosa and Enterococcus faecalis remained unaffected. Almost complete elimination was reached after 24 h for Staphylococcus aureus at 0.5 mg/mL and Klebsiella pneumoniae at 0.25 mg/mL. Surface modifications of spherical ZnO particles by treatment with methylene blue even improved the antibacterial activity against Staphylococcus aureus. Nanostructured surfaces of ZnO particles provide active and modifiable interfaces for the contact with and killing of bacteria. The application of solid state chemistry, i.e., the direct matter-to-matter interaction between active agent and bacterium, in the form of ZnO tetrapods and non-soluble ZnO particles, can add an additional principle to the spectrum of antibacterial mechanisms, which is, in contrast to soluble antibiotics, depending on the direct local contact with the microorganisms on tissue or material surfaces.

Optimization of SAW Sensors for Nanoplastics and Grapevine Virus Detection

In this work, we report the parametric optimization of surface acoustic wave (SAW) delay lines on Lithium niobate for environmental monitoring applications. First, we show that the device performance can be improved by acting opportunely on geometrical design parameters of the interdigital transducers such as the number of finger pairs, the finger overlap length and the distance between the emitter and the receiver. Then, the best-performing configuration is employed to realize SAW sensors. As aerosol particulate matter (PM) is a major threat, we first demonstrate a capability for the detection of polystyrene particles simulating nanoparticulates/nanoplastics, and achieve a limit of detection (LOD) of 0.3 ng, beyond the present state-of-the-art. Next, the SAW sensors were used for the first time to implement diagnostic tools able to detect Grapevine leafroll-associated virus 3 (GLRaV-3), one of the most widespread viruses in wine-growing areas, outperforming electrochemical impedance sensors thanks to a five-times better LOD. These two proofs of concept demonstrate the ability of miniaturized SAW sensors for carrying out on-field monitoring campaigns and their potential to replace the presently used heavy and expensive laboratory instrumentation.

Nanomedicine: New Frontiers in Fighting Microbial Infections

Microbes have dominated life on Earth for the past two billion years, despite facing a variety of obstacles. In the 20th century, antibiotics and immunizations brought about these changes. Since then, microorganisms have acquired resistance, and various infectious diseases have been able to avoid being treated with traditionally developed vaccines. Antibiotic resistance and pathogenicity have surpassed antibiotic discovery in terms of importance over the course of the past few decades. These shifts have resulted in tremendous economic and health repercussions across the board for all socioeconomic levels; thus, we require ground-breaking innovations to effectively manage microbial infections and to provide long-term solutions. The pharmaceutical and biotechnology sectors have been radically altered as a result of nanomedicine, and this trend is now spreading to the antibacterial research community. Here, we examine the role that nanomedicine plays in the prevention of microbial infections, including topics such as diagnosis, antimicrobial therapy, pharmaceutical administration, and immunizations, as well as the opportunities and challenges that lie ahead.

Metal-Based Nanoparticles: A Prospective Strategy for Helicobacter pylori Treatment

Helicobacter pylori (H. pylori) is an infectious pathogen and the leading cause of gastrointestinal diseases, including gastric adenocarcinoma. Currently, bismuth quadruple therapy is the recommended first-line treatment, and it is reported to be highly effective, with >90% eradication rates on a consistent basis. However, the overuse of antibiotics causes H. pylori to become increasingly resistant to antibiotics, making its eradication unlikely in the foreseeable future. Besides, the effect of antibiotic treatments on the gut microbiota also needs to be considered. Therefore, effective, selective, antibiotic-free antibacterial strategies are urgently required. Due to their unique physiochemical properties, such as the release of metal ions, the generation of reactive oxygen species, and photothermal/photodynamic effects, metal-based nanoparticles have attracted a great deal of interest. In this article, we review recent advances in the design, antimicrobial mechanisms and applications of metal-based nanoparticles for the eradication of H. pylori. Additionally, we discuss current challenges in this field and future perspectives that may be used in anti-H. pylori strategies.

Antibacterial Pathways in Transition Metal-Based Nanocomposites: A Mechanistic Overview

Across the planet, outbreaks of bacterial illnesses pose major health risks and raise concerns. Photodynamic, photothermal, and metal ion release effects of transition metal-based nanocomposites (TMNs) were recently shown to be highly effective in reducing bacterial resistance and upsurges in outbreaks. Surface plasmonic resonance, photonics, crystal structures, and optical properties of TMNs have been used to regulate metal ion release, produce oxidative stress, and generate heat for bactericidal applications. The superior properties of TMNs provide a chance to investigate and improve their antimicrobial actions, perhaps leading to therapeutic interventions. In this review, we discuss three alternative antibacterial strategies based on TMNs of photodynamic therapy, photothermal therapy, and metal ion release and their mechanistic actions. The scientific community has made significant efforts to address the safety, effectiveness, toxicity, and biocompatibility of these metallic nanostructures; significant achievements and trends have been highlighted in this review. The combination of therapies together has borne significant results to counter antimicrobial resistance (4-log reduction). These three antimicrobial pathways are separated into subcategories based on recent successes, highlighting potential needs and challenges in medical, environmental, and allied industries.

Influence of silver ion release on the inactivation of antibiotic resistant bacteria using light-activated silver nanoparticles

The widespread increase in antibiotic resistance (AR), in an extensive range of microorganisms, demands the development of alternative antimicrobials with novel non-specific low-mutation bacterial targets. Silver nanoparticles (AgNPs) and photosensitizers (PSs) are promising antimicrobial agents with broad-spectrum activity and low tendency for antimicrobial resistance development. Herein, we investigated the light-mediated oxidation of AgNPs for accelerated release of Ag⁺ in the antibacterial synergy of PS-AgNP conjugates using protoporphyrin IX (PpIX) as a PS. Also, the influence of polyethyleneimine (PEI) coated AgNPs in promoting antibacterial activity was examined. We synthesized, characterized and tested the antimicrobial effect of three nanoparticles: AgNPs, PpIX-AgNPs, and PEI-PpIX-AgNPs against a methicillin-resistant Staphylococcus aureus strain (MRSA) and a wild-type multidrug resistant (MDR) E. coli. PpIX-AgNPs were the most effective material achieving >7 log inactivation of MRSA and MDR E. coli. The order of bacterial log inactivation was PpIX-AgNPs > PEI-PpIX-AgNPs > AgNPs. This order correlates with the trend of Ag⁺ concentration released by the NPs (PpIX-AgNPs > PEI-PpIX-AgNPs > AgNPs). Our study confirms a synergistic effect between PpIX and AgNPs in the inactivation of AR pathogens with about 10-fold increase in inactivation of ARB relative to AgNPs only. The concentration of Ag⁺ released from NPs determined the log inactivation of MRSA and MDR E. coli more than either the phototoxic effect or the electrostatic interaction promoted by surface charge of nanoparticles with bacteria cells. All NPs showed negligible cytotoxicity to mammalian cells at the bacterial inhibitory concentration after 24 h exposure. These observations confirm the crucial role of optimized Ag⁺ release for enhanced performance of AgNP-based antimicrobials against AR pathogens.

Preparation, Characterization, and Staphylococcus aureus Biofilm Elimination Effect of Baicalein-Loaded β-Cyclodextrin-Grafted Chitosan Nanoparticles

BACKGROUND AND PURPOSE

Infections caused by Staphylococcus aureus (S. aureus) colonization in medical implants are resistant to antibiotics due to the formation of bacterial biofilm internal. Baicalein (BA) has been confirmed as an inhibitor of bacterial biofilm with less pronounced effects owing to its poor solubility and absorption. Studies have found that β-cyclodextrin-grafted chitosan (CD-CS) can improve drug efficiency as a drug carrier. Therefore, this research aims to prepare BA-loaded CD-CS nanoparticles (CD-CS-BA-NPs) for S. aureus biofilm elimination enhancement.

METHODS

CD-CS-BA-NPs were prepared via the ultrasonic method. The NPs were characterized using the X-ray diffraction (XRD), Thermo gravimetric analyzer (TGA), Transmission electron microscopy (TEM) and Malvern Instrument. The minimum inhibitory concentration (MIC) of the NPs were investigated. The biofilm models in vivo and in vitro were constructed to assess the S. aureus biofilm elimination ability of the NPs. The Confocal laser method (CLSM) and the Live/Dead kit were employed to explore the mechanism of the NPs in promoting biofilm elimination.

RESULTS

CD-CS-BA-NPs have an average particle size of 424.5 ± 5.16 nm, a PDI of 0.2 ± 0.02, and a Zeta potential of 46.13 ± 1.62 mV. TEM images revealed that the NPs were spherical with uniform distribution. XRD and TGA analysis verified the formation and the thermal stability of the NPs. The NPs with a MIC of 12.5 ug/mL exhibited a better elimination effect on S. aureus biofilm both in vivo and in vitro. The mechanism study demonstrated that the NPs may permeate into the biofilm more easily, thereby improving the biofilm elimination effect of BA.

CONCLUSION

CD-CS-BA-NPs were successfully prepared with enhanced elimination of S. aureus biofilm, which may serve as a reference for future development of anti-biofilm agents.

Inorganic nanomaterials for intelligent photothermal antibacterial applications

Antibiotics are currently the main therapeutic agent for bacterial infections, but they have led to bacterial resistance, which has become a worldwide problem that needs to be addressed. The emergence of inorganic nanomaterials provides a new opportunity for the prevention and treatment of bacterial infection. With the continuous development of nanoscience, more and more inorganic nanomaterials have been used to treat bacterial infections. However, single inorganic nanoparticles (NPs) are often faced with problems such as large dosage, strong toxic and side effects, poor therapeutic effect and so on, so the combination of inorganic nano-materials and photothermal therapy (PTT) has become a promising treatment. PTT effectively avoids the problem of bacterial drug resistance, and can also reduce the dosage of inorganic nanomaterials to a certain extent, greatly improving the antibacterial effect. In this paper, we summarize several common synthesis methods of inorganic nanomaterials, and discuss the advantages and disadvantages of several typical inorganic nanomaterials which can be used in photothermal treatment of bacterial infection, such as precious metal-based nanomaterials, metal-based nanomaterials and carbon-based nanomaterials. In addition, we also analyze the future development trend of the remaining problems. We hope that these discussions will be helpful to the future research of near-infrared (NIR) photothermal conversion inorganic nanomaterials.

Haptoglobin-Conjugated Gold Nanoclusters as a Nanoantibiotic to Combat Bacteremia

Gold nanoclusters have revealed great potential as nanoantibiotics due to their superior chemical and physical characteristics. In this study, a peptide with 83 amino acids derived from haptoglobin was utilized as a surface ligand to synthesize gold nanoclusters via a facile hydrothermal approach. Characterization of the structural and optical properties demonstrated the successful synthesis of derived haptoglobin-conjugated gold nanoclusters. The spherical derived haptoglobin-conjugated gold nanoclusters exhibited a (111) plane of cubic gold and an ultra-small size of 3.6 ± 0.1 nm. The optical properties such as ultraviolet-visible absorption spectra, X-ray photoelectron spectroscopy spectra, fluorescence spectra, and Fourier transform infrared spectra also validated the successful conjugation between the derived haptoglobin peptide and the gold nanoclusters surface. The antibacterial activity, reactive oxygen species production, and antibacterial mechanisms of derived haptoglobin-conjugated gold nanoclusters were confirmed by culturing the bacterium Escherichia coli with hemoglobin to simulate bacteremia. The surface ligand of the derived haptoglobin peptide of derived haptoglobin-conjugated gold nanoclusters was able to conjugate with hemoglobin to inhibit the growth of Escherichia coli. The derived haptoglobin-conjugated gold nanoclusters with an ultra-small size also induced reactive oxygen species production, which resulted in the death of Escherichia coli. The superior antibacterial activity of derived haptoglobin-conjugated gold nanoclusters can be attributed to the synergistic effect of the surface ligand of the derived haptoglobin peptide and the ultra-small size. Our work demonstrated derived haptoglobin-conjugated gold nanoclusters as a promising nanoantibiotic for combating bacteremia.

Synergies in antimicrobial treatment by a levofloxacin-loaded halloysite and gold nanoparticles with a conjugation to a cell-penetrating peptide

Herein, a novel designed antimicrobial therapeutic drug delivery system is presented, in which halloysite nanotubes (HNTs) encapsulate a determined dosage of levofloxacin (lvx). Moreover, gold nanoparticles (AuNPs) have been embedded into the structure for plasmonic heating under irradiation of the green LED light (7 W, 526 nm). It was revealed that the plasmonic heating of the AuNPs leads to a controlled trend in the lvx release process. Also, a synergistic effect on the antimicrobial activity of the prepared therapeutic system has been observed through photothermal heating of the structure. To enhance the cell adhesion, a cell-penetrating peptide sequence (CPP) is conjugated to the surfaces. This CPP has led to quick co-localization of the prepared nano-cargo (denoted as lvx@HNT/Au-CPP) with the bacterial living cells and further attachment (confirmed by confocal microscopy). Concisely, the structure of the designed nano-cargo has been investigated by various methods, and the in vitro cellular experiments (zone of inhibition and colony-counting) have disclosed that the antimicrobial activity of the lvx is significantly enhanced through incorporation into the HNT/Au-CPP delivery system (drug content: 16 wt%), in comparison with the individual lvx with the same dosage. Hence, it can be stated that the bacterial resistance against antibiotics and the toxic effects of the chemical medications are reduced through the application of the presented strategy.

Flexible and High-Throughput Photothermal Biosensors for Rapid Screening of Acute Myocardial Infarction Using Thermochromic Paper-Based Image Analysis

Herein, we developed a flexible, low-cost thermosensitive fiber paper for the visual display in photothermal biosensing systems for early acute myocardial infarction. The thermal signal visualization device was encapsulated with rewritable thermal fibers, which exhibited excellent stability and reversibility. The mechanism of color change in thermal paper was based on a temperature-driven reversible transformation of the structure of the dye molecule (crystalline violet lactone, CVL). It exhibits a gradation from blue to colorless at higher temperatures and gradually returns to blue when the temperature drops. Immobilization and cascade enzymatic reactions of target molecules occurred in an integrated 3D-printed detection device, a photothermal conversion process occurred under near-infrared light excitation, and the colorimetric change values of the encapsulated thermal paper were recorded and evaluated for possible pathogenicity using a smartphone. It was worth noting that the effect of the thermogenic ring-opening behavior of CVL on the macroscopic phenomenon of color change was obtained by density functional theory calculations. Under optimized conditions, the naked-eye-recognizable range of the thermal paper-based photothermal immunoassay sensor was 0.2-20 ng mL^-1, This work creatively presents theoretical studies of promising thermal paper-based photothermal biosensors and provides new insights for the development of low-cost, instrument-free portable photothermal biosensors.

Lipid-Based Nanomaterials for Drug Delivery Systems in Breast Cancer Therapy

Globally, breast cancer is one of the most prevalent diseases, inducing critical intimidation to human health. Lipid-based nanomaterials have been successfully demonstrated as drug carriers for breast cancer treatment. To date, the development of a better drug delivery system based on lipid nanomaterials is still urgent to make the treatment and diagnosis easily accessible to breast cancer patients. In a drug delivery system, lipid nanomaterials have revealed distinctive features, including high biocompatibility and efficient drug delivery. Specifically, a targeted drug delivery system based on lipid nanomaterials has inherited the advantage of optimum dosage and low side effects. In this review, insights on currently used potential lipid-based nanomaterials are collected and introduced. The review sheds light on conjugation, targeting, diagnosis, treatment, and clinical significance of lipid-based nanomaterials to treat breast cancer. Furthermore, a brighter side of lipid-based nanomaterials as future potential drug delivery systems for breast cancer therapy is discussed.

Deploying Gold Nanomaterials in Combating Multi-Drug-Resistant Bacteria

Antibiotic resistance has become a serious threat to human health due to the overuse of antibiotics. Different antibiotics are being developed to treat resistant bacteria, but the development cycle of antibiotics is hard to keep up with the high incidence of antibiotic resistance. Recent advances in antimicrobial nanomaterials have made nanotechnology a powerful solution to this dilemma. Among these nanomaterials, gold nanomaterials have excellent antibacterial efficacy and biosafety, making them alternatives to antibiotics. This review presents strategies that use gold nanomaterials to combat drug-resistant bacteria. We focus on the influence of physicochemical factors such as surface chemistry, size, and shape of gold nanomaterials on their antimicrobial properties and describe the antimicrobial applications of gold nanomaterials in medical devices. Finally, the existing challenges and future directions are discussed.

NIR-Absorbing Mesoporous Silica-Coated Copper Sulphide Nanostructures for Light-to-Thermal Energy Conversion

Plasmonic nanostructures, featuring near infrared (NIR)-absorption, are rising as efficient nanosystems for in vitro photothermal (PT) studies and in vivo PT treatment of cancer diseases. Among the different materials, new plasmonic nanostructures based on Cu_2−xS nanocrystals (NCs) are emerging as valuable alternatives to Au nanorods, nanostars and nanoshells, largely exploited as NIR absorbing nanoheaters. Even though Cu_2−xS plasmonic properties are not linked to geometry, the role played by their size, shape and surface chemistry is expected to be fundamental for an efficient PT process. Here, Cu_2−xS NCs coated with a hydrophilic mesoporous silica shell (MSS) are synthesized by solution-phase strategies, tuning the core geometry, MSS thickness and texture. Besides their loading capability, the silica shell has been widely reported to provide a more robust plasmonic core protection than organic molecular/polymeric coatings, and improved heat flow from the NC to the environment due to a reduced interfacial thermal resistance and direct electron–phonon coupling through the interface. Systematic structural and morphological analysis of the core-shell nanoparticles and an in-depth thermoplasmonic characterization by using a pump beam 808 nm laser, are carried out. The results suggest that large triangular nanoplates (NPLs) coated by a few tens of nanometers thick MSS, show good photostability under laser light irradiation and provide a temperature increase above 38 °C and a 20% PT efficiency upon short irradiation time (60 s) at 6 W/cm² power density.

Metal organic framework-based antibacterial agents and their underlying mechanisms

Bacteria, as the most abundant living organisms, have always been a threat to human life until the development of antibiotics. However, with the wide use of antibiotics over a long time, bacteria have gradually gained tolerance to antibiotics, further aggravating threat to human beings and environmental safety significantly. In recent decades, new bacteria-killing methods based on metal ions, hyperthermia, free radicals, physical pricks, and the coordination of several multi-mechanisms have attracted increasing attention. Consequently, multiple types of new antibacterial agents have been developed. Among them, metal organic frameworks (MOFs) appear to play an increasingly important role. The unique characteristics of MOFs make them suitable multiple-functional platforms. By selecting the appropriate metastable coordination bonds, MOFs can act as reservoirs and release antibacterial metal ions or organic linkers; by constructing a porous structure, MOFs can act as carriers for multiple types of agents and achieve slow and sustained release; and by designing their composition and the pore structure precisely, MOFs can be endowed with properties to produce heat and free radicals under stimulation. Importantly, in combination with other materials, MOFs can act as a platform to kill bacteria effectively through the synergistic effect of multiple types of mechanisms. In this review, we focus on the recent development of MOF-based antibacterial agents, which are classified according to their antibacterial mechanisms.

Calcium Phosphate Nanoclusters for the Repair of Tooth Enamel Erosion

The artificial repair of tooth enamel is still an urgent requirement because it has a complicated and well-arranged structure. Herein, calcium phosphate nanoclusters (CaP NCs) were synthesized, via a facile approach, for application in the repair of tooth enamel erosion. Structural and optical characterizations validated the successful preparation of spherical CaP NCs, with an average size of 2.1 ± 0.11 nm. By evaporating the ethanol and triethylamine (TEA) solvents, pure CaP was produced, which was further used to repair the tooth enamel. Simulated caries lesions were achieved via phosphoric acid etching to cause damage to enamel rods. After repair, the damaged enamel rods were directly covered with CaP. According to microhardness testing, after repair with CaP NCs, the hardness value of the tooth enamel with acid etching increased to a similar level to that of normal tooth enamel. The results of the microhardness test indicated that CaP NCs revealed great potential for repairing tooth enamel erosion. Our work demonstrates a promising potential for treating the early stage of tooth erosion with CaP NCs. Based on these findings, we believe that stable CaP NCs can be employed as a precursor for the tunable, effective repair of tooth enamel in the near future.

Hierarchical Passage of Gold Nanoclusters in Living Bacteria

Gold (Au) nanoclusters chemically synthesized on the cell surface of living Lactobacillus rhamnosus rendered them photoluminescent. Importantly, the bacteria were viable and the clusters were passed down the generations with the loss of luminescence in the first subculture onward. The clusters were agglomerated into spherical structures of 100-200 nm, without being converted to plasmonic Au nanoparticles, on the cell surfaces of the bacteria of all six subcultures studied. The results indicated the role of cell wall remodeling in transforming the Au nanoclusters into larger aggregates down the generations. This may hold important implications for using nanoparticle-studded bacteria in theranostics.

Plasmonic Nanosensors: Design, Fabrication, and Applications in Biomedicine

Current advances in the fabrication of smart nanomaterials and nanostructured surfaces find wide usage in the biomedical field. In this context, nanosensors based on localized surface plasmon resonance exhibit unprecedented optical features that can be exploited to reduce the costs, analytic times, and need for expensive lab equipment. Moreover, they are promising for the design of nanoplatforms with multiple functionalities (e.g., multiplexed detection) with large integration within microelectronics and microfluidics. In this review, we summarize the most recent design strategies, fabrication approaches, and bio-applications of plasmonic nanoparticles (NPs) arranged in colloids, nanoarrays, and nanocomposites. After a brief introduction on the physical principles behind plasmonic nanostructures both as inherent optical detection and as nanoantennas for external signal amplification, we classify the proposed examples in colloid-based devices when plasmonic NPs operate in solution, nanoarrays when they are assembled or fabricated on rigid substrates, and nanocomposites when they are assembled within flexible/polymeric substrates. We highlight the main biomedical applications of the proposed devices and offer a general overview of the main strengths and limitations of the currently available plasmonic nanodevices.

Fucoidan-Mediated Anisotropic Calcium Carbonate Nanorods of pH-Responsive Drug Release for Antitumor Therapy

The shape of nanoparticles can determine their physical properties and then greatly impact the physiological reactions on cells or tissues during treatment. Traditionally spherical nanoparticles are more widely applied in biomedicine but are not necessarily the best. The superiority of anisotropic nanoparticles has been realized in recent years. The synthesis of the distinct-shaped metal/metal oxide nanoparticles is easily controlled. However, their biotoxicity is still up for debate. Hence, we designed CaCO3 nanorods for drug delivery prepared at mild condition by polysaccharide-regulated biomineralization in the presence of fucoidan with sulfate groups. The CaCO3 nanorods with a pH sensitivity–loaded antitumor drug mitoxantrone hydrochloride (MTO) showed excellent antitumor efficacy for the HeLa cells and MCF-7 cells in vitro. We believe that anisotropic nanoparticles will bring forth an emblematic shift in nanotechnology for application in biomedicine.

Versatile Au@Ru nanocomposites for the rapid detection of Salmonella typhimurium and photothermal sterilization

In view of the current public health hazards of food-borne pathogens, it is urgent to develop a rapid detection method with high sensitivity, good specificity and operational convenience, as well as to determine an effective sterilization strategy. Herein, versatile gold-ruthenium nanocomposites modified with antibody (Au@Ru-pAb Ncs) have been constructed for the sensitive detection of Salmonella typhimurium (S. typhimurium) via the lateral flow immunochromatographic assay (LFIA). Au@Ru-pAb Ncs based LFIA exhibited a wide detection range from 2.9 × 10⁶ CFU/mL to 2.9 × 10¹¹ CFU/mL with the limit of detection of 9.8 × 10⁴ CFU/mL for S. typhimurium, and displayed excellent specificity. In addition, Au@Ru-pAb Ncs irradiated with 808 nm (500 mW/cm²) near-infrared light (NIR) had a significant antibacterial effect within only 5 min, attributed to its high photothermal conversion efficiency of 54.14%. Therefore, both sensitive detection of S. typhimurium and effective NIR-triggered photothermal sterilization were achieved by using versatile Au@Ru-pAb Ncs, showing great prospects in the field of pathogen detection and treatment.

Plasmonic Metal Nanoparticles Hybridized with 2D Nanomaterials for SERS Detection: A Review

In SERS analysis, the specificity of molecular fingerprints is combined with potential single-molecule sensitivity so that is an attractive tool to detect molecules in trace amounts. Although several substrates have been widely used from early on, there are still some problems such as the difficulties to bind some molecules to the substrate. With the development of nanotechnology, an increasing interest has been focused on plasmonic metal nanoparticles hybridized with (2D) nanomaterials due to their unique properties. More frequently, the excellent properties of the hybrids compounds have been used to improve the drawbacks of the SERS platforms in order to create a system with outstanding properties. In this review, the physics and working principles of SERS will be provided along with the properties of differently shaped metal nanoparticles. After that, an overview on how the hybrid compounds can be engineered to obtain the SERS platform with unique properties will be given.

Synergistic Effects Between Metal Nanoparticles and Commercial Antimicrobial Agents: A Review

Nanotechnology has expanded into a broad range of clinical applications. In particular, metal nanoparticles (MNPs) display unique antimicrobial properties, a fundamental function of novel medical devices. The combination of MNPs with commercial antimicrobial drugs (e.g., antibiotics, antifungals, and antivirals) may offer several opportunities to overcome some disadvantages of their individual use and enhance effectiveness. MNP conjugates display multiple advantages. As drug delivery systems, the conjugates can extend the circulation of the drugs in the body, facilitate intercellular targeting, improve drug stabilization, and possess superior delivery. Concomitantly, they reduce the required drug dose, minimize toxicity, and broaden the antimicrobial spectrum. In this work, the common strategies to combine MNPs with clinically used antimicrobial agents are underscored. Furthermore, a comprehensive survey about synergistic antimicrobial effects, the mechanism of action, and cytotoxicity is depicted.