A novel near-infrared fluorimetric method for point-of-care monitoring of Fe2+ and its application in bioimaging

A novel "Turn-Off-On" fluorescent probe for specific sequential detection of Cu2+ and glyphosate and its application in biological imaging

As common pollutants, Cu2+ and glyphosate pose a serious threat to human health and the ecosystem. Herein, a fluorescent probe (E)-7-(diethylamino)-N'(4-(diethylamino)-2-hydroxybenzyl)-2-oxo-2H chromophore-3-carbazide (DDHC) was designed and synthesised for the sequential recognition of Cu2+ and glyphosate. DDHC has the advantages of a short synthesis path, easy-to-obtain raw materials, good anti-interference ability, and strong stability. The interaction of the DDHC-Cu2+ complexes with glyphosate allows the amino and carboxyl groups in glyphosate molecules to coordinate with Cu2+ strongly, competing for the Cu2+ in the DDHC-Cu2+ complexes and releasing the DDHC, leading to the recovery of fluorescence. The recognition was further validated through Job's plot, HRMS, and DFT calculations. In addition, the successful recovery of Cu2+ and glyphosate in different environmental water samples fully demonstrates the practical application potential of DDHC. Especially, DDHC has low cytotoxicity and can enter zebrafish and HeLa cells, rapidly reacting with Cu2+ and glyphosate in the body, generating visible fluorescence quenching and recovery phenomena, achieving real-time visual monitoring of exogenous Cu2+ and glyphosate in zebrafish and HeLa cells. The targeting and dual selectivity of DDHC greatly enhance its potential application value in the field of detection, providing important theoretical support for studying the fate of multiple pollutants in the environment.

Fluorescent N-oxides: applications in bioimaging and sensing

N-Oxides, due to their zwitterionic nature and ability to form hydrogen bonds through the oxide ion, are highly water-soluble and widely used in biological and pharmacological studies. The N-oxide structural scaffold is introduced into molecules, enabling "turn-on" fluorescence via an intramolecular charge transfer (ICT) process. This process occurs when the N-O bond is cleaved, either through an enzymatic reaction under hypoxic conditions or by using Fe(II), which allows rapid and selective detection of Fe(II) at nanomolar concentrations both in vitro and in vivo. This review focuses on the literature published between 2010 and 2024, particularly emphasising N-oxide fluorophores and their applications in hypoxic cell lines, Fe(II) detection, and bioimaging.

Theoretical and experimental investigation of novel quinazoline derivatives: synthesis, photophysical, reactive properties, molecular docking and selective HSA biointeraction

Two new quinazoline derivatives (2a and 2b) were successfully synthesized in this work using the condensation technique in excellent yields. Using spectroscopic techniques and elemental analyses, the compounds were completely characterized. Density functional theory (DFT) computations have been used to examine the title compound's reactive characteristics. Chemical reactivity was predicted using local reactive descriptors and molecule electrostatic potential. Additionally, Time dependent DFT (TD-DFT) simulations were used to examine the impact of solvents on the photophysical characteristics. The affinity of compounds 2a and 2b for human serum albumin (HSA) was further explored using several electronic spectroscopies. Through static mechanisms, both compounds reduce the intrinsic fluorescence of HSA. It is determined that the HSA-2b complex's binding constant is significantly greater than the HSA-2a complex. The fluorescence spectrum measurements proved that the HSA underwent structural changes after interaction with these compounds. It was demonstrated by site marker competitive displacement studies that compounds 2a and 2b preferred to bind to site I in HSA subdomain IIA. Additionally, synchronised fluorescence spectra were utilized to analyze how HSA's conformation changed after interacting with various substances. The molecular docking investigations of these compounds with the three critical HSA binding sites, comprising subdomains IIA, IIIA, and IB, further confirmed the experimental findings. The significant contact between the investigated compounds and HSA was supported by the docking simulations.Communicated by Ramaswamy H. Sarma.

A Near-Infrared Colorimetric Fluorescent Probe for Ferrous Ion Detection and Imaging

Based on the N-redox mechanism, a turn-on near-infrared fluorescence probe (SWJT-15) with cyano isophorone as skeleton was designed and synthesized for the detection of ferrous ions (Fe2+). The probe has a lower detection limit (83 nM) and fast response (200 s) to Fe2+ ions. And the probe has unique selectivity and good anti-interference performance against Fe2+ ions compared to other metal ions. Moreover, the probe has been successfully applied to imaging Fe2+ ions in HeLa cells.

Detecting labile heme and ferroptosis through 'turn-on' fluorescence and lipid droplet localization post Fe2+ sensing

Iron, a crucial biologically active ion essential for metabolic processes in living organisms, plays a vital role in biological functions, and imbalances in iron levels can lead to various diseases. In this study, we have developed two simple "turn-on" fluorescent probes, NOPy and NOCN, for the quick and selective detection of Fe2+ at nanomolar levels (LOD of 35 nM), accompanied by significant absorption and emission shifts, along with colorimetric demarcation. Both fluorophores exhibit an excellent "turn-on" emission response upon encountering Fe2+ in the cells. Flow cytometry and confocal fluorescence imaging studies demonstrate enhanced fluorescence signals in response to labile iron, efficiently detecting heme during erastin-induced ferroptosis. Interestingly, we also observed that the product formed after Fe2+ sensing localizes within the lipid droplets. These water-soluble and highly sensitive reactive probes, NOPy and NOCN, enable investigations of iron-dependent physiological and pathological conditions. The development of these probes represents an advancement in the field, offering a rapid and selective means for detecting Fe2+ with minimal cytotoxicity.

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

Difunctional Fluorescent Probes for Iron and Hydrogen Sulfide Detection Based on Diphenyl Derivative

In order to better monitor the content of Fe3+ and H2S in the biological environment, two new fluorescent probes were designed and synthesized. With the addition of Fe3+, the strong fluorescence emission of two probes was significantly quenched due to the paramagnetic effect of Fe3+. With the further addition of S2-, the fluorescence intensity was quickly restored. Two probes showed high selectivity and strong sensitivity for the detection of Fe3+ and S2-, and the fluorescence intensity "ON-OFF-ON" was accompanied with the interaction process. At the same time, two probes displayed good anti-interference ability which was not interfered by the existence of other ions. In addition, two probes illustrated fast response time to Fe3+, S2- and small cytotoxicity to cells. Therefore, two probes can provide a potential ideal tool for detecting Fe3+ and H2S in organisms and the environment.

Copper(II) Driven Fluorescence switch-on Detection of Ovalbumin and GSH Using a Pyridoxal 5'-phosphate Derived Tetradentate Schiff Base and its Applications

The facile detection of glutathione (GSH) and ovalbumin (OVA) is of great importance in biological research. Herein, a tetradentate Schiff base N, N'-bis(pyridoxal-5-phosphate)-o-phenylenediamine (L) obtained by condensing two moles of pyridoxal 5'-phosphate (PLP) with one mole of 1,2-phenylenediamine was employed for the fluorescence switch-on detection of GSH and OVA. When excited at 389 nm, receptor L showed a weak emission at 454 nm in an aqueous medium. The addition of GSH to the solution of L caused a significant fluorescence enhancement at 454 nm. Amino acids (leucine, glycine, serine, tryptophan, homocysteine, alanine, methionine, arginine and proline) and albumins (bovine serum albumin and OVA) failed to alter the fluorescence profile of L. Receptor L can be applied to detect GSH down to 1.16 µM. However, the fluorescence emission of L was quenched upon the formation of the L-Cu2+ complex. The addition of GSH and OVA to the in-situ formed L-Cu2+ complex restored not only the fluorescence emission of L but also a noticeable fluorescence enhancement observed at 454 nm. The decomplexation of L-Cu2+, along with the interaction of L with GSH and OVA is expected to suppress the conformational flexibility of L that enhanced the fluorescent intensity at 454 nm. Using L-Cu2+ complex, the concentration of OVA and GSH can be detected down to 0.31 µM and 0.20 µM, respectively. Molecular docking and dynamics simulation were performed to analyze the binding mode, conformational flexibility and dynamic stability of the L-Cu2+-OVA complex. Finally, the analytical novelty of L-Cu2+ was examined by detecting GSH/OVA in real biological samples, such as human blood serum, urine, and egg white.

A novel Zn2+-coordination fluorescence probe for sensing HPPD inhibitors and its application in environmental media and biological imaging

Mesotrione, topramezone, tembotrione, and sulcotrione are four types of 4-hydroxyphenylpyruvate dioxidase (HPPD) inhibitor herbicides that are extensively employed in agricultural practices, but their usage also leads to environmental pollution and poses risks to human health. A probe (E)-1-((2-(pyridin-2-yl) hydrazineylidene) methyl) naphthalen-2-ol (CHMN) based on chelation enhancement (CHEF) effect synthesized. CHMN was first chelated with Zn2+ to form a probe system with green, which can be further used to detect mesotrione, topramezone, tembotrione and sulcotrione in complicated environment. CHMN-Zn2+ detection of four pesticides was accurate, with an excellent linear relationship between 0 and 100 μM. The detection limits were LODmesotrione = 7.79 μM, LODtopramezone = 1.91 μM, LODtembotrione = 1.38 μM and LODsulcotrione = 2.43 μM. The detection time is 1 min, and it is successfully applied in real water sample and bioimaging. This work can provide a novel method for studying the migration and behavior of environmental pollutants.

A Chalcone-based Fluorescence Probe for H2S Detecting Utilizing ESIPT Coupled ICT Mechanism

The accurate and effective identification of hydrogen sulfide holds great significance for environmental monitoring. Azide-binding fluorescent probes are powerful tools for hydrogen sulfide detection. We combined the 2'-Hydroxychalcone scaffold with azide moiety to construct probe Chal-N3, the electron-withdrawing azide moiety was utilized to block the ESIPT process of 2'-Hydroxychalcone and quenches the fluorescence. The fluorescent probe was triggered with the addition of hydrogen sulfide, accompanied by great fluorescence intensity enhancement with a large Stokes shift. With excellent fluorescence properties including high sensitivity, specificity selectivity, and wider pH range tolerance, the probe was successfully applied to natural water samples.

Fluorescent Carbon Dots: Aggregation-Induced Emission Enhancement, Application as Probe for CN- and Cr2O7-2, Sensing Strips and Bio-imaging Agent

Fluorescent carbon dots (Trp-CDs) were prepared using tryptophan as precursor and were characterized on the basis of elemental analysis, powder-XRD, IR, Raman spectroscopy, 13C-NMR, UV-Vis, fluorescence and TEM. Trp-CDs exhibit poor fluorescence in 100% water but showed strong Aggregation Induced Emission (AIE) in ethanol and higher alcohols. The anion sensing study of Trp-CD revealed that it selectively detects CN- and Cr2O7-2 and from fluorescence quenching titration study, quenching constant, LOD and range of detection were evaluated. The emission life-time of Trp-CD before and after addition of CN- and Cr2O7-2 were measured, the decay curve before addition of anion was best fitted with a bi-exponential function with life-time of τ1 2.79 ns (10.74%) and τ2 18.93 ns (89.26%). The mechanistic study revealed that for CN-, the fluorescence quenching is due to its interaction with protons attached to surface functional groups and for Cr2O7-2, it is due to inner filter effect (IFE). Sensing strips were prepared by coating Trp-CDs onto various solid surfaces including agarose films and were used for detection of CN- and Cr2O7-. Trp-CD was found to be nontoxic and biocompatible and used as staining agent for Artemia and Bacteria (Bacillus Subtilis, Pseudomonas) and detection of CN- and Cr2O7-.

Biomass derived green carbon dots for sensing applications of effective detection of metallic contaminants in the environment

The rapid consumption of metals and unorganized disposal have led to unprecedented increases in heavy metal ion concentrations in the ecosystem, which disrupts environmental homeostasis and results in agricultural biodiversity loss. Mitigation and remediation plans for heavy metal pollution are largely dependent on the discovery of cost-effective, biocompatible, specific, and robust detectors because conventional methods involve sophisticated electronics and sample preparation procedures. Carbon dots (CDs) have gained significant importance in sensing applications related to environmental sustainability. Fluorescence sensor applications have been enhanced by their distinctive spectral properties and the potential for developing efficient photonic devices. With the recent development of biomass-functionalized carbon dots, a wide spectrum of multivalent and bivalent transition metal ions responsible for water quality degradation can be detected with high efficiency and minimal toxicity. This review explores the various methods of manufacturing carbon dots and the biochemical mechanisms involved in metal detection using green carbon dots for sensing applications involving Cu (II), Fe (III), Hg (II), and Cr (VI) ions in aqueous systems. A detailed discussion of practical challenges and future recommendations is presented to identify feasible design routes.

Fluoranthene-terminated terpyridine ensemble for fluorescence light up and ratiometric chemical sensor for multi toxic metals

A novel π-electron rich fluoranthene embellished with a phenyl spacer and coupled with terpyridine (TS1) was developed through Diels-Alder reaction. Single crystal X-ray structure evidences the variations in dihedral angles between the fluoranthene and the phenyl unit responsible for development of non-coplanar interactions and stabilized by a wave-like molecular packing in the crystal lattice with weak π-π interaction of 4.125 Å. The peripheral terpyridine of TS1 endows an efficient binding with multiple metal ions by colorimetric and fluorometric methods. TS1 exhibits a ratiometric fluorescence response from sky blue to yellow colour upon the addition of Zn²⁺ ions with a limit of detection (LOD) of 0.05 ppm. The other metal ions such as Cu²⁺, Co²⁺ and Fe²⁺ demonstrate fluorescence quenching behaviour with LODs of 0.1, 0.3 and 0.7 ppm, respectively. The intramolecular charge transfer (ICT) shows the variation in TS1 emission behaviour upon metal ions interaction and quantitatively discriminates the metal ion concentrations. TS1 conferred a visual colorimetric change from colourless to magenta, enabling naked-eye detection of Fe²⁺ and showing clear discrimination between Fe²⁺ and Fe³⁺ ions for the real-time water samples. Furthermore, we have investigated the effect of TS1 in Zebrafish larvae/embryos and cytotoxicity in human urinary tract transitional cell carcinoma cells (UM-UC-3).

A highly selective and sensitive ICT-based Cu2+ fluorescent probe and its application in bioimaging

Cu²⁺ is an essential trace element for the organism, but its excess can also cause irreversible damage to the organism. As such, a "Turn-Off" fluorescent probe DPAP for the specific detection of Cu²⁺ was successfully constructed. DPAP exhibits large Stokes shift (120 nm), fast reaction speed (1 min), low detection limit (15.2 nM), low toxicity, and good cell permeability. Cu²⁺ quenches the fluorescence of DPAP by blocking its intramolecular charge transfer process to achieve the detection of Cu²⁺ and has been confirmed by HRMS, ¹H NMR and DFT calculations. Excitingly, the five-cycle detection of Cu²⁺ and the successful recovery of trace Cu²⁺ in environmental water samples fully demonstrate the potential of DPAP for practical applications. In particular, DPAP can observe the distribution and translocation patterns of exogenous Cu²⁺ in HeLa cells and zebrafish in real-time. This research concept has offered important theoretical support for the study of the environmental behavior of heavy metal ions.

A reversible CHEF-based NIR fluorescent probe for sensing Hg2+ and its multiple application in environmental media and biological systems

Hg²⁺ poses a great threat to human health and the environment due to its bioaccumulation and permanent damage. Herein, a reversible CHEF-based near-infrared fluorescent probe 2-(3-((E)-4-((E)-4-(diethylamino)-2- hydroxybenzylidene)amino)styryl)-5,5-dimethylcyclohex-2-en-1-ylidene)propanedinitrile (DHEY) capable of specifically recognizing Hg²⁺ was constructed. DHEY exhibits advantages of large Stokes shift (157 nm), excellent selectivity, high sensitivity (LOD = 3.2 μg/L), and fast response efficiency (<3 min). Interestingly, DHEY can also realize rapid and effective detection of Hg²⁺ after being recycled 7 times. The successful recovery of trace Hg²⁺ in different environmental water samples fully demonstrates the potential of DHEY for actual applications. In particular, DHEY enables real-time observation of the distribution and translocation pattern of exogenous Hg²⁺ in HeLa cells and zebrafish. This work provides important theoretical support for investigating the fate of heavy metal ions in the environment using fluorescence techniques.

Enantioselective effect of chiral prothioconazole on the conformation of bovine serum albumin

As a typical chiral triazole fungicide, the enantioselective toxicity of prothioconazole to environmental organisms is of increasing concern. Herein, the binding mechanism of chiral PTCs to BSA was investigated by multi-spectral technique and molecular docking. Fluorescence titration and fluorescence lifetime experiments fully established that quenching BSA fluorescence by chiral PTCs is static quenching and could spontaneously bind to BSA. Hydrophobic interactions dominate the binding process of chiral PTCs to BSA. Differently, although both chiral PTCs and BSA have a primary binding site, the difference in chiral isomerism leads to a stronger binding ability of S-PTC than R-PTC. Both configurations of PTC can change the conformation of BSA and induce changes in the microenvironment around its amino acid residues, and the effect of S-PTC is more significant. Overall, S-PTC exhibited a more substantial effect on BSA structure relative to R-PTC. That is, S-PTC may lead to more potent potential toxicological effects on environmental organisms. This study provides a comprehensive assessment of the environmental behavior of chiral pesticides and their potential toxicity to environmental organisms at the molecular level and provides a theoretical basis for the screening of highly effective and biologically less toxic enantiomers of chiral pesticides.

Effects of plant morphology, vitamin C, and other co-present pesticides on the deposition, dissipation, and metabolism of chlorothalonil in pakchoi

Pesticide residues have been a focus of attention of food safety. Different varietal pakchoi plants grown in open fields were studied to understand effects of morphology, leaf wax content, and vitamin C on the deposition, dissipation, and metabolism of chlorothalonil. The loose pakchoi plants and flat leaves were conducive to pesticide deposition, but not plants with erect leaves. Chlorothalonil on nine varieties of pakchoi dissipated in the first-order kinetic with T1/2 s of 1.4 ~ 2.0 days. Vitamin C in pakchoi could promote the dissipation of chlorothalonil. Carbendazim could significantly promote the dissipation of chlorothalonil on pakchoi. Interestingly, four metabolites of chlorothalonil were identified in the pakchoi and the metabolic pathway was predicted by DFT calculations. The risk assessment showed that pakchoi were safe for consumption after 10 days of application of the recommended dose. This work provides important information for the understanding of deposition, dissipation, and metabolism of chlorothalonil in pakchoi.

A red-emissive benzothiazole-based luminophore with ESIPT and AIE natures and its application for detecting and imaging hypochlorous acid

A new "ESIPT + AIE" based dye of benzothiazole with red emission and a large Stokes shift was constructed by combining 2-(2'-hydroxyphenyl)benzothiazole as the ESIPT unit and α-cyanostilbene as the AIE unit. The compound BACN was found to be a ideal HClO chemosensor, and presented palpable fluorescence and colorimetric responses toward HClO via the HClO-trigged oxidation cleavage of the ethylene bridge activated by the electron withdrawing cyano group. BACN was capable of recognizing HClO rapidly (12 s) and sensitively under physiological conditions, with good selectivity over other biologically pertinent substances. Thanks to strong red emission (λ_em = 606 nm) and large Stokes shift (213 nm) resulted from the combination of ESIPT and AIE effects, it was successfully utilized for the recognition of exogenous and endogenous HClO in living HeLa cells.

A novel ESIPT-based fluorescent probe with dual recognition sites for the detection of hydrazine in the environmental water samples and in-vivo bioimaging

Hydrazine (N₂H₄), an important chemical intermediate, has been widely used in industrial production and agricultural life, but it has also caused environmental pollution. A novel ESIPT-based fluorescent probe with dual recognition sites, 2-(benzothiazole-2-yl)-1,4-imphenyl bis 4-bromobutyric acid (BRBA), was developed to selectively detect N₂H₄ under complex conditions. BRBA exhibits accurate detection for N₂H₄ with a good linear relationship ranging from 0 to 150 μM, and the LOD can reach 0.1 μM. Importantly, taking advantage of low cytotoxicity and a large Stokes shift, BRBA can be utilized to monitor environmental water samples and successfully applied to imaging HeLa cells and zebrafish.

Construction of a novel fluorescent nanocarrier with double hollow shells for pH-controlled release of imidacloprid and its distribution and transport in bok choy

Nanotechnology has been widely used in the field of pesticides. Integration of nano-pesticides and carbon dot fluorescence can fully utilize the potential for high admission of pesticides on leaves and convenience observation of its distribution and transport in the tissues. In the present study, a fluorescent mesoporous nanosilica with double hollow shells for loading imidacloprid (Im@FL-MSNs) was designed and synthesized. The physical and chemical properties of the imidacloprid nanocarriers were characterized by transmission electron microscopy (TEM), FT-IR spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and N₂ adsorption/desorption. When the mass ratio of FL MSNs to imidacloprid is 6:5, Im@FL-MSNs exhibits good fluorescence properties, high loading efficiency (∼30%), great slow-release performance as well as pH controllability. Besides, Im@FL-MSNs can improve the ability of imidacloprid to adhere on the leaf surface of bok choy (Initial contact angled is greater than 80°）. Importantly, Im@FL-MSNs did not reduce the biological activity of imidacloprid (LC₅₀ (95% CI) = 1.43 mg/L). It was able to visually study the absorption and distribution of imidacloprid in bok choy plants, and provide theoretical and technical guidance for pesticide reduction.

A Pilot Study on the Concentration, Distribution and Bioaccumulation of Polybrominated Diphenyl Ethers (PBDEs) in Tissues and Organs of Grassland Sheep

Polybrominated diphenyl ether (PBDE) concentrations in various tissues and organs of grassland sheep from Inner Mongolia, China, were determined. The abilities of PBDEs binding to ovine serum albumin (OSA) and Cytochrome P450 enzyme (CYP3A24) were assessed by fluorescence spectroscopy and molecular docking simulations. The PBDE concentrations in the sheep tissue and organ samples were 33.4-167 pg/g dw. The distribution of PBDEs in sheep organs and tissues is affected not only by the function of organs and tissues, but also by the characteristics of PBDEs. Adipose tissue tends to bioaccumulate more-brominated BDEs (BDE-154, -153, and -183), but muscle tissues and visceral organs mainly bioaccumulate less-brominated BDEs. The distribution of PBDEs in visceral organs is mainly affected by the transport of ovine serum albumin (OSA) and the metabolism of CYP3A24 enzyme. The distribution of PBDEs in adipose tissue and brain is mainly affected by their logKOW.

Potential toxic effects of sulfonamides antibiotics: Molecular modeling, multiple-spectroscopy techniques and density functional theory calculations

Sulfonamide antibiotics (SAs) are widely used in medicine, animal husbandry and aquaculture, and excessive intake of SAs may pose potential toxicity to organisms. The toxicological mechanisms of two classical SAs, sulfamerazine (SMR) and sulfamethoxazole (SMT), were investigated by molecular docking, DFT and multi-spectroscopic techniques using HSA and BSA as model proteins. The quenching of HSA/BSA endogenous fluorescence by SMR was higher than that by SMT due to the stronger binding effect of the pyrimidine ring on HSA/BSA compared to the oxazole ring, and that result was consistent with that predicted by DFT calculations. Thermodynamic parameters show that the binding of SAs to HSA/BSA is an exothermic process that proceeds spontaneously (ΔG < 0). Marker competition experiments illustrate that the binding site of SMR/SMT on serum albumin is located in subdomain IIIA. The combination of SAs and HSA/BSA is mainly realized by hydrogen bond and hydrophobic interaction, and the concept is also supported by molecular modeling. The reduced α-helix content of HSA/BSA induced by SMR/SMT indicates a greater stretching of the protein α-helix structure of the SMR/SMT-HSA/BSA. The results could provide useful toxicological information on the hazards of SAs in response to growing concern that SAs may pose a toxic threat to organisms.

Efficient Degradation of Printing and Dyeing Wastewater by Lotus Leaf-Based Nitrogen Self-Doped Mesoporous Biochar Activated Persulfate: Synergistic Mechanism of Adsorption and Catalysis

The discharge of printing and dyeing wastewater has been increasing, causing serious environmental pollution with the rapid development of the industry. Based on this, an N self-doped mesoporous lotus leaf biochar (LLC800) was prepared from lotus leaves as raw material for the activation of Persulfate (PS) to degrade wastewater from printing and dyeing. The removal rate of AO7 by PS, LLC800 and LLC800/PS systems were 0.84%, 31.11% and 99.46%, respectively. Electron paramagnetic resonance spectroscopy (EPR) and quench tests showed the presence of free radicals (•OH, SO4●− and O2●−) and nonradical (1O2) in the LLC800/PS system, where nonradicals (1O2) play an important role in the degradation of AO7. The “N self-doped” effect formed by the high N content of lotus leaves is the main factor leading to the high adsorption and catalytic performance of lotus leaf biochar. The effect of pyrolysis temperature on the performance of biochar can be attributed to the change of N content and conformation and specific surface area in biochar. Moreover, the LLC800/PS system has a strong resistance to interference. This work can provide technical support for the preparation of high-performance adsorption-catalytic biochar and the development of high-performance activation materials for persulfate.

Nanochannel Array on Electrochemically Polarized Screen Printed Carbon Electrode for Rapid and Sensitive Electrochemical Determination of Clozapine in Human Whole Blood

Rapid and highly sensitive determination of clozapine (CLZ), a psychotropic drug for the treatment of refractory schizophrenia, in patients is of great significance to reduce the risk of disease recurrence. However, direct electroanalysis of CLZ in human whole blood remains a great challenge owing to the remarkable fouling that occurs in a complex matrix. In this work, a miniaturized, integrated, disposable electrochemical sensing platform based on the integration of nanochannel arrays on the surface of screen-printed carbon electrodes (SPCE) is demonstrated. The device achieves high determination sensitivity while also offering the electrode anti-fouling and anti-interference capabilities. To enhance the electrochemical performance of SPCE, simple electrochemical polarization including anodic oxidation and cathodic reduction is applied to pretreat SPCE. The electrochemically polarized SPCE (p-SPCE) exhibits an enhanced electrochemical peak signal toward CLZ compared with bare SPCE. An electrochemically assisted self-assembly method (EASA) is utilized to conveniently electrodeposit a vertically ordered mesoporous silica nanomembrane film (VMSF) on the p-SPCE, which could further enrich CLZ through electrostatic interactions. Owing to the dual signal amplification based on the p-SPCE and VMSF nanochannels, the developed VMSF/SPCE sensor enables determination of CLZ in the range from 50 nM to 20 μM with a low limit of detection (LOD) of 28 nM (S/N = 3). Combined with the excellent anti-fouling and anti-interference abilities of VMSF, direct and sensitive determination of CLZ in human blood is also achieved.

A reasonably constructed fluorescent chemosensor based on the dicyanoisophorone skeleton for the discriminative sensing of Fe3+ and Hg2+ as well as imaging in HeLa cells and zebrafish

In this study, a new fluorescent sensor dicyanoisophorone Rhodanine-3-acetic acid (DCI-RDA) (DCI-RDA) has been developed by employing a DCI-based push–pull dye as the fluorophore and RDA as the recognition moiety for the simultaneous sensing of Fe³⁺ and Hg²⁺ with a large Stokes Shift (162 nm), high selectivity and sensitivity, and low LOD (1.468 μM for Fe³⁺ and 0.305 μM for Hg²⁺). In particular, DCI-RDA has a short response time (30 s). The Job's plot method in combination with ¹H NMR titration and theoretical calculations was used to determine the stoichiometry of both DCI-RDA-Fe³⁺/Hg²⁺ complexes to be 1 : 1. Moreover, DCI-RDA is applied as a fluorescent probe for imaging in HeLa cells and zebrafish, indicating that it can be potentially applied for Fe³⁺/Hg²⁺ sensing in the field of biology.

A new fluorescent sensor dicyanoisophorone rhodanine-3-acetic acid has been developed by employing a DCI-based push–pull dye as the fluorophore and RDA as the recognition moiety for the simultaneous sensing of Fe³⁺ and Hg²⁺.

Uptake, translocation and metabolism of imidacloprid loaded within fluorescent mesoporous silica nanoparticles in tomato (Solanum lycopersicum)

Fluorescence-labeling technology has been widely used for rapid detection of pesticides in agricultural production. However, there are few studies on the use of this technology to investigate pesticide uptake and transport in plants with fluorescent nanoparticle formulations. Here, we investigated uptake, transport, accumulation and metabolism of imidacloprid loaded in fluorescent mesoporous SiO₂ nanoparticles (Im@FL-MSNs) in tomato plants, and compared the results with the pesticide application in granular formulation. The results revealed that Im@FL-MSNs applied via root uptake and foliar spray both could effectively transport in tomato plants and carry the imidacloprid to plant tissues. Neither Im@FL-MSNs nor imidacloprid was detected inside of tomato fruits from root uptake or foliar spray applications. Compared with the foliar application of granular formulation, imidacloprid in Im@FL-MSNs demonstrated a higher concentration in leaves (1.14 ± 0.07 mg/kg > 1.08 ± 0.04 mg/kg, 1.13 ± 0.09 mg/kg > 1.11 ± 0.02 mg/kg), longer half-life (0.84 d < 1.31 d, 0.90 d < 1.36 d) and small numbers of metabolites formed. These results suggest that mesoporous silica nanoparticles could serve as an effective and efficient pesticide carrier for achieving the high use efficiency in plant protection. The information is also helpful to guide the pesticide applications and assess the risks associated with environmental quality and dietary consumption of vegetables.

Rational design of a facile camphor-based fluorescence turn-on probe for real-time tracking of hypochlorous acid in vivo and in vitro

A novel camphor-based fluorescence turn-on probe with high selectivity and sensitivity was developed for HClO detection, and it was successfully employed for real-time imaging of exogenous and endogenous HClO in living cells as well as in living zebrafish.

Metabolic iron detection through divalent metal transporter 1 and ferroportin mediated cocktail fluorogenic probes

A cocktail [1 + 2] dual-fluorescent probe system was developed to realize the real-time visualization of dynamic iron state changes between Fe2+ and Fe3+ at the cellular level and in multicellular organisms, providing insights into the effect of DMT1 and ferroportin on iron regulation.

A New Spiropyran-Based Fluorescent Probe for Dual Sensing of Ferrous Ion and pH

A new spiropyran-based fluorescent probe was developed for dual detection of Fe2+ ion and pH. Addition of Fe2+ and Ag+ to the probe solution enhanced the fluorescence intensity by 6 and 5 fold, respectively. Addition of Fe3+, Hg2+ and Ni2+ caused slight increase in the fluorescence intensity of the probe. While addition of other common metal ions did not bring about substantial change of the fluorescence. Thus the probe can be used for fluorescence turn-on detection of Fe2+ ion in ethanol/water (9:1) medium. The detection limit of the probe for Fe2+ is 0.77 µM. The suitable pH range for the probe to detect Fe2+ was pH 3 - 9. Other metal ions including Li+, Na+, K+, Ag+, Cu2+, Zn2+, Co2+, Ni2+, Mn2+, Sr2+, Hg2+, Ca2+, Mg2+, Al3+, Cr3+, and Fe3+ did not cause marked interference with Fe2+ recognition. The color of the probe solution was yellow at pH 1 - 2 and colorless at other pH values. The fluorescence intensity of the probe was low at pH 1 - 12 and increased significantly when the pH was 13 and 14, indicating that the probe can be used as a colorimetric and fluorescent probe for sensing extremely acidic or extremely alkaline conditions through different channels.

Two birds with one stone: A highly sensitive near-infrared BODIPY-based fluorescent probe for the simultaneous detection of Fe2+ and H+ in vivo

Ferrous ion (Fe²⁺) plays an essential role in many physiological and pathological processes, and its cellular metabolism is closely related to acidic pH. However, the lack of multifunctional Fe²⁺ probes has hindered the further study of Fe²⁺ in vivo. Herein, we report a dual-responsive near-infrared (NIR) fluorescent probe BODIPY-Fe for the simultaneous of Fe²⁺ and H⁺ in vivo by harnessing the N-oxide strategy and photoinduced electron transfer (PeT) mechanism. BODIPY-Fe exhibited NIR fluorescence at 671 nm, rapid response to Fe²⁺ within 90 s, and high sensitivity of low LOD of 292 nM towards Fe²⁺. Moreover, BODIPY-Fe could sensitively and selectively detect Fe²⁺ and H⁺ in the lysosomes of living cells simultaneously. Notably, BODIPY-Fe was able to noninvasively visualize Fe²⁺ and H⁺ in vivo, showing "ON-OFF-ON" NIR fluorescence signal changes. This work demonstrates that BODIPY-Fe has great potential to promote the simultaneous imaging of Fe²⁺ and H⁺ in biological systems.