Visible-light-driven photoelectrochemical sensing platform based on BiOI nanoflowers/TiO2 nanotubes for detection of atrazine in environmental samples

Triple modal aptasensor arrays driven by CHA-mediated DNAzyme for signal-amplified atrazine pesticide accumulation monitoring in agricultural crops

Developing sensors with high selectivity and sensitivity is of great significance for pesticide analysis in environmental assessment. Herein, a versatile three-way sensor array was designed for the detection of the pesticide atrazine, based on the integration of catalytic hairpin assembly (CHA) amplification and three-mode signal transducers. With atrazine, CHA was triggered to generate abundant G-quadruplex. The produced G-quadruplex hybrid could assemble with thioflavin T (TFT) or hemin to mimic enzyme and induce the fluorescence enhancement by TFT, or the colorimetric increase by the oxidized chromogenic substrate and the naked-eye color change by inhibiting the L-cysteine-mediated aggregation of gold nanoparticles. A distinctive three-mode array was successfully constructed with convenience, on-site accessibility and high sensitivity for enzyme-free practical analysis of atrazine. It is also effective and reliable for analyzing real samples including paddy water, paddy soil and polished rice. The detection limits for atrazine were as low as 7.4 pg/mL by colorimetric observation and 0.25 pg/mL by fluorescent detection. Furthermore, the array was exploited to monitor the residue, distribution and bioaccumulation of atrazine in maize and rice for food security and environmental assessment. Hence, this work presented a versatile example for sensitive and on-site all-in-one pesticide analysis arrays with multiple signal report modes.

Highly sensitive and selective photoelectrochemical detection of bis(2-ethylhexyl)phthalate on broad-spectrum responsive and interfacial electronic interaction induced p-n BiOI/ZnO nanoarrays heterojunction

Bis(2-ethylhexyl)phthalate (DEHP), an endocrine disruptor, shows carcinogenic, teratogenic, mutagenic and estrogenic effects. It is easy to release from plastic materials and migrate to soil environment, causing serious pollution and posing a great threat to human health. In our work, a photoelectrochemical (PEC) sensing platform for DEHP detection was constructed using BiOI/ZnO nanoarrays (NRs) as the transducer species and the DEHP aptamers as the biological recognition elements. ZnO NRs with three-dimensional and large diameter area were prepared by hydrothermal method to increase the light absorption capacity. Coupling BiOI in a narrow band gap with ZnO NRs strengthened visible-light absorption, while promoting charge carrier separation and transportation. This was attributed to the generation of an internal electric field between BiOI and ZnO NRs, exhibiting obvious photocurrent response. The as-developed PEC sensing platform demonstrated great sensing performance for detection of DEHP. Furthermore, the photocurrent varied and the logarithm of DEHP concentration showed a linear relationship from 1.0 × 10-11 to 5.0 × 10-7 mol/L, and the limit of detection was estimated to be 3.8 × 10-12 mol/L. In the meantime, while evaluating its usage in real soil samples, satisfying outcomes were realized. Thus, the as-proposed PEC sensing platform provided a potential device to monitor DEHP in the environment.

Recent advances in photoelectrochemical platforms based on porous materials for environmental pollutant detection

Human health and ecology are seriously threatened by harmful environmental contaminants. It is essential to develop efficient and simple methods for their detection. Environmental pollutants can be detected using photoelectrochemical (PEC) detection technologies. The key ingredient in the PEC sensing system is the photoactive material. Due to the unique characteristics, such as a large surface area, enhanced exposure of active sites, and effective mass capture and diffusion, porous materials have been regarded as ideal sensing materials for the construction of PEC sensors. Extensive efforts have been devoted to the development and modification of PEC sensors based on porous materials. However, a review of the relationship between detection performance and the structure of porous materials is still lacking. In this work, we present an overview of PEC sensors based on porous materials. A number of typical porous materials are introduced separately, and their applications in PEC detection of different types of environmental pollutants are also discussed. More importantly, special attention has been paid to how the porous material's structure affects aspects like sensitivity, selectivity, and detection limits of the associated PEC sensor. In addition, future research perspectives in the area of PEC sensors based on porous materials are presented.

A review of nanomaterials for biosensing applications

A biosensor is a device that reacts with the analyte to be analyzed, detects its concentration, and generates readable information, which plays an important role in medical diagnosis, detection of physiological indicators, and disease prevention. Nanomaterials have received increasing attention in the fabrication and improvement of biosensors due to their unique physicochemical and optical properties. In this paper, the properties of nanomaterials such as the size effect, optical and electrical properties, and their advantages in the field of biosensing are briefly summarized, and the application of nanomaterials can effectively improve the sensitivity and reduce the detection limit of biosensors. The advantages of commonly used nanomaterials such as gold nanoparticles (AuNPs), carbon nanotubes (CNTs), quantum dots (QDs), graphene, and magnetic nanobeads for biosensor applications are also reviewed. Besides, the two main types of biosensors using nanomaterials involved in their construction and their working principles are described, and the toxicity and biocompatibility of nanomaterials and the future direction of nanomaterial biosensors are discussed.

Triple-Mode Sensor Coupled by Photoelectrochemical, Electrochromic, and Spectral Signals for Sensitive Visualized Detection of Nonylphenol

Conventional photoelectrochemical (PEC) biosensors suffer from the difficulty of visualizing rapid detection and limited accuracy due to a single-signal output. Here, we develop a PEC, electrochromic (EC), and spectral (ST) triple-mode platform for the sensitive visualized detection of nonylphenol (NP). First, the reasonably stepped Fermi energy level arrangement between the defective TiO2 anode and MoO3 cathode enables a remarkable photocurrent response (Mode 1). Then, MoO3 itself is a widely used EC candidate, which can react with free Li-ions to form a LixMoO3 intermediate, and its color will change from white to blue accordingly (Mode 2). More importantly, MoO3 is also a Li-ion host and the potential of LixMoO3 depends on the inserted Li-ion quantity deduced by spectral analysis on residual Li-ions in the electrolyte (Mode 3). The EC signal endows fast visual detection, and triple-mode cross-validation improves reliability and accuracy. As a result, this PEC-EC-ST triple-mode molecularly imprinted sensor has a wide linear range (1-5000 μg L-1), a low detection limit (0.18 μg L-1), selectivity, stability, reproducibility, and actual sample detection capability. This innovative multimode platform not only improves detection reliability but also broadens applications of electrochromic/energy storage materials in biosensors.

Triggering "signal-on" photoelectrochemical responses by heterojunction transition for selective detection of copper(II) based on Pd/MoS2@g-C3N4 nanocomposites

Controlling the concentration of copper(II) in aquatic systems is of importance for human health. Numerous traditional technologies to detect Cu2+ may encounter with limitations, such as high signal background and complicated operation. Herein, a highly selective photoelectrochemical (PEC) sensor is proposed for the "signal-on" detection of Cu2+ employing g-C3N4 nanosheets with MoS2 and Pd quantum dots deposited (Pd/MoS2@g-C3N4). Pd/MoS2@g-C3N4 could present the enhanced photocurrents of specific responses to Cu2+ under light irradiation. MoS2 quantum dots on the sensor are agglomerated into MoS2 bulk during sensing Cu2+, forming an efficient Z-scheme heterojunction. The heterojunction transition induced photoelectrons transferring from the bulk MoS2 to g-C3N4, resulting in "signal-on" PEC responses. Such Z-scheme heterojunction has conquered the traditional heterojunction towards "signal-on" mechanism, that was further verified by band structure measurements and DMPO spin trapping ESR analysis. Photocurrent intensities increased gradually with the addition of incremental Cu2+ concentrations, achieving a detection limit of 0.21 μM and a broad linear interval range from 1 μM to 1 mM with high selectivity and stability. This work may open a new door towards the in situ construction of g-C3N4-based Z-scheme heterojunctions for the signal-on PEC sensing platform, providing wide applications in environmental monitoring and food safety.

Immobilization-Free Photoelectrochemical Aptasensor for Atrazine Based on Bifunctional Graphene Signal Amplification and a Controllable Sulfhydryl-Assembled BiOBr/Ag NP Microinterface

Immobilization-free sensors (IFSs), with no requirement of fixing the recognition element to the electrode surface, have received increasing attention due to their unique advantages of reusable electrodes, not being limited by the load of the recognition element, and not being easily changed to the structure of the probe. In the present work, an effective visible light-driven immobilization-free photoelectric aptasensor for ultrasensitive detection of atrazine (ATZ) was proposed based on a reusable BiOBr/Ag NP substrate electrode with ultrafast charge transfer. Controllable thiols were used as conditioning agents for the photoelectric signal. The ingeniously designed bifunctional graphene can act as not only a molecular "bridge" for the ATZ aptamer through a strong π-π stacking effect, obtaining a graphene-aptamer complex, serving as a homogeneous recognition element, but also a switch for signal modulation for quantitative detection of target substances. Benefiting from the synergistic effect of the above-mentioned factors, the proposed sensor is capable of ultrasensitive and highly selective detection of ATZ in real water samples with a low detection limit of 1.2 pM and a wide linear range from 5.0 pM to 10.0 nM. Furthermore, it shows high stability, good selectivity, and strong anti-interference ability. Thus, this work has provided a fresh perspective for designing advanced immobilization-free photoelectric sensors and convenient detection of environmental pollutants.

An ultra-sensitive photoelectrochemical sensor for chlorpyrifos detection based on a novel BiOI/TiO2 n-n heterojunction

Due to widespread application of chlorpyrifos for controlling pests in agriculture, the continuous accumulation of chlorpyrifos residue has caused serious environmental pollution.The detection of chlorpyrifos is of great significance for humans and environment because it can arise a series of diseases by inhibiting acetylcholinesterase (AChE) activity. Photoelectrochemical sensing, as an emerging sensing technology, has great potential in the detection of chlorpyrifos. It is urgent that find a suitable photoelectric sensing strategy to effectively monitor chlorpyrifos. Herein, an n-n heterojunction was constructed by uniformly immobilizing n-type 3DBiOI, which had loose porous structure composed of numerous small and thin nanosheets, on the surface of TiO₂ with anatase/rutile (AR-TiO₂) heterophase junction. Under light irradiation, the proposed BiOI/AR-TiO₂ n-n heterojunction exhibited excellent optical absorption characteristics and photoelectrochemical activity. Additionally, the photoelectrochemical sensing platform demonstrated excellent analytical performance in monitoring chlorpyrifos. Under optimized conditions, it showed a wide detection range of 1 pg mL^-1- 200 ng mL^-1 and a detection limit (S/N = 3) as low as 0.24 pg mL^-1, with superior selectivity and stability. The ultra-sensitivity and great specificity for detection of chlorpyrifos can be ascribed to chelation between Bi (Ⅲ) and C=N and P=S bonds in chlorpyrifos, which had been confirmed in this work. Meanwhile, the PEC sensor also had potential application value for monitoring chlorpyrifos in water samples, lettuce and pitaya, which the recoveries of samples ranged from 96.9% to 104.7% with a relative standard deviation (RSD) of 1.11%-5.93%. This sensor provided a novel idea for constructing heterojunctions with high photoelectric conversion efficiency and had a high application prospect for the detection of chlorpyrifos and other structural analogues.

A novel "turn-off" photoelectrochemical aptasensing platform for selective detection of tobramycin based on the Ti3C2-MoS2/BiOI heterojunction

Tobramycin (TOB), as a widely used antibiotic, poses severe unpredictable risks to ecology and health. In this study, a novel photoelectrochemical (PEC) adapter sensor, based on its "turn-off" PEC mode, was constructed for TOB detection. This visible-light-driven photoelectrochemical (PEC) aptasensor was successfully developed for TOB detection using Ti3C2-MoS2/BiOI and TOB aptamer probes. When TOB was captured by probes anchored on the modified electrode, a decreased photocurrent was also noted due to steric hindrance and this further hindered electron transfer. Under optimal conditions, 0.001 ng mL-1 to 40 ng mL-1 of TOB could be identified, with the detection limit being as low as 0.5 pg mL-1. At the same time, actual samples were also explored. Finally, the proposed sensor exhibited high specificity, satisfactory detectability and great reproducibility, thereby providing a novel approach for the detection of pollutants.

Photoelectrochemical performance of BiOI/TiO2 nanotube arrays (TNAs) p-n heterojunction synthesized by SILAR-ultrasonication-assisted methods

In order to extend the visible region activity of titania nanotube array (TNAs) films, the successive ionic layer adsorption and reaction (SILAR)-ultrasonication-assisted method has been used to prepare BiOI-modified TiO₂ nanotube arrays (BiOI/TNAs). The band gap of BiOI/TNAs for all the variations reveals absorption in the visible absorption. The surface morphology of BiOI/TNAs is shown in the nanoplate, nanoflake and nanosheet forms with a vertical orientation perpendicular to TiO₂. The crystalline structure of BiOI did not change the structure of the anatase TNAs, with the band gap energy of the BiOI/TNAs semiconductor in the visible region. The photocurrent density of the BiOI/TNAs extends to the visible-light range. BiOI/TNAs prepared with 1 mM Bi and 1 mM KI on TNAs 40 V 1 h, 50 V 30 min show the optimum photocurrent density. A tandem dye-sensitized solar cell (DSSC)-photoelectrochemical (PEC) was used for hydrogen production in salty water. BiOI/TNAs optimum was used as the photoanode of the PEC cell. The solar to hydrogen conversion efficiency (STH) of tandem DSSC-PEC reaches 1.34% in salty water.

Au nano-flower/organic polymer heterojunction-based cathode photochemical biosensor with reduction-accelerated quenching effect of porphyrin manganese

In this work, a novel reduction-accelerated quenching of manganese porphyrin (MnPP) based signal-off cathode photochemical (PEC) biosensor by using Au nano-flower/organic polymer (PTB7-Th) heterojunction as platform was proposed for ultrasensitive detection of Hg²⁺. Firstly, the photoactive PTB7-Th with Au nano-flower on electrode could form a typical Mott-Schottky heterojunction for acquiring an extremely high cathode signal. Meanwhile, the presence of target Hg²⁺ could bring in the formation of T-Hg²⁺-T based scissor-like DNA walker, which thus activated efficient Mg²⁺-specific DNAzyme based cleavage recycling to shear hairpin H2 on electrode to exposure abundant trigger sites of hybridization chain reaction (HCR) for in-situ decoration of quencher MnPP. Here, besides the steric hinderance and light competition effect of MnPP decorated DNA nanowires attributing to signal decrease, we for the first time testified the MnPP reduction-accelerated quenching that constantly consumed the photo-generated electron by using cyclic voltammetry (CV). As a result, the proposed biosensor had excellent sensitivity and selectivity to Hg²⁺ in the range of 1 fM-10 nM with a detection limit of 0.48 fM. The actual sample analysis showed that the biosensor could reliably and quantitatively identify Hg²⁺, indicating an excellent application prospect in routine detection.

Design an efficient photoelectrochemical aptasensor for PCB72 based on CdTe@CdS core@shell quantum dots-decorated TiO2 nanotubes

In this work, an efficient and novel photoelectrochemical (PEC) aptasensor for 2,3',5,5'-tetrachlorobiphenyl (PCB72) was constructed based on CdTe@CdS core@shell quantum dots (CdTe@CdS QDs)-decorated TiO₂ nanotubes (TiO₂ NTs). CdTe@CdS QDs were prepared by the combination of CdTe and CdS with a proper lattice mismatch. Due to their large band offsets, core@shell QDs can reduce undesirable carrier recombination, significantly improving their charge separation efficiency. Then the synthesized CdTe@CdS QDs were modified on TiO₂ NTs (CdTe@CdS QDs/TiO₂ NTs) through electrostatic adsorption method. The as-prepared composites exhibit a wide visible light absorption range, good PEC activity and high photoelectric conversion efficiency. Also, the PEC aptasensor prepared via the immobilization of anti-PCB72 aptamer on the composites exhibits outstanding analytical performance with high sensitivity and specificity for PCB72 under visible-light irradiation, achieving a detection limit as low as 0.03 ng/L. It was also applied to detect PCB72 in four different real environmental samples with satisfactory results.

Comprehension of the Synergistic Effect between m&t-BiVO4/TiO2-NTAs Nano-Heterostructures and Oxygen Vacancy for Elevated Charge Transfer and Enhanced Photoelectrochemical Performances

Through the utilization of a facile procedure combined with anodization and hydrothermal synthesis, highly ordered alignment TiO2 nanotube arrays (TiO2-NTAs) were decorated with BiVO4 with distinctive crystallization phases of monoclinic scheelite (m-BiVO4) and tetragonal zircon (t-BiVO4), favorably constructing different molar ratios and concentrations of oxygen vacancies (Vo) for m&t-BiVO4/TiO2-NTAs heterostructured nanohybrids. Simultaneously, the m&t-BiVO4/TiO2-NTAs nanocomposites significantly promoted photoelectrochemical (PEC) activity, tested under UV-visible light irradiation, through photocurrent density testing and electrochemical impedance spectra, which were derived from the positive synergistic effect between nanohetero-interfaces and Vo defects induced energetic charge transfer (CT). In addition, a proposed self-consistent interfacial CT mechanism and a convincing quantitative dynamic process (i.e., rate constant of CT) for m&t-BiVO4/TiO2-NTAs nanoheterojunctions are supported by time-resolved photoluminescence and nanosecond time-resolved transient photoluminescence spectra, respectively. Based on the scheme, the m&t-BiVO4/TiO2-NTAs-10 nanohybrids exhibited a photodegradation rate of 97% toward degradation of methyl orange irradiated by UV-visible light, 1.14- and 1.04-fold that of m&t-BiVO4/TiO2-NTAs-5 and m&t-BiVO4/TiO2-NTAs-20, respectively. Furthermore, the m&t-BiVO4/TiO2-NTAs-10 nanohybrids showed excellent PEC biosensing performance with a detection limit of 2.6 μM and a sensitivity of 960 mA cm-2 M-1 for the detection of glutathione. Additionally, the gas-sensing performance of m&t-BiVO4/TiO2-NTAs-10 is distinctly superior to that of m&t-BiVO4/TiO2-NTAs-5 and m&t-BiVO4/TiO2-NTAs-20 in terms of sensitivity and response speed.

Engineering exposed vertical nano-TiO2 (001) facets/BiOI nanosheet heterojunction film for constructing a satisfactory PEC glucose oxidase biosensor

In the field of photoelectrochemical (PEC) enzyme biosensors, constructing efficient photoelectrodes, in which the recombination of photogenerated carriers is an important factor affecting the performance, is of great significance. Herein, to enhance the separation efficiency of photogenerated carriers, titanium dioxide (TiO₂) nanosheet (NS)/bismuth oxyiodide (BiOI) NS/glucose oxidase (GOx) composites were prepared via hydrothermal and solvothermal methods. Single-crystal anatase TiO₂ NSs with a high percentage of (001) facets lead to better photocarrier separation due to heterojunctions between facets. After coupling with BiOI NSs, the photoelectrochemical performance of the electrode was greatly improved. The photogenerated electrons from TiO₂ and BiOI gathered at TiO₂ (101) and were exported through the fluorine-doped tin oxide (FTO) substrate to generate electrical signals. Photogenerated holes were transferred to TiO₂ (001) and BiOI to participate in the enzymatic reaction, showing the outstanding separation of electrons and holes. The prepared TiO₂ NS/BiOI NS/GOx glucose biosensor achieved satisfactory results, with sensitivity of 14.25 μA mM⁻¹ cm⁻², a linear measurement range of 0–1 mM, and a limit of detection (3S/N) of 0.01 mM in phosphate buffered saline (PBS) at a pH of 7.4. The mechanism for the efficient separation of photogenerated carriers based on the facet heterojunctions introduced in this paper also provides new insights into other optoelectronic biosensors.

Demonstration of the mechanism based on the synergistic effect of TiO₂ facet heterojunctions and TiO₂/BiOI heterojunctions to promote efficient separation of photogenerated carriers.

Applications of Titanium Dioxide Nanostructure in Stomatology

Breakthroughs in the field of nanotechnology, especially in nanochemistry and nanofabrication technologies, have been attracting much attention, and various nanomaterials have recently been developed for biomedical applications. Among these nanomaterials, nanoscale titanium dioxide (nano-TiO₂) has been widely valued in stomatology due to the fact of its excellent biocompatibility, antibacterial activity, and photocatalytic activity as well as its potential use for applications such as dental implant surface modification, tissue engineering and regenerative medicine, drug delivery carrier, dental material additives, and oral tumor diagnosis and treatment. However, the biosafety of nano-TiO₂ is controversial and has become a key constraint in the development of nano-TiO₂ applications in stomatology. Therefore, in this review, we summarize recent research regarding the applications of nano-TiO₂ in stomatology, with an emphasis on its performance characteristics in different fields, and evaluations of the biological security of nano-TiO₂ applications. In addition, we discuss the challenges, prospects, and future research directions regarding applications of nano-TiO₂ in stomatology that are significant and worthy of further exploration.

Highly sensitive and selective photoelectrochemical aptasensing of di-2-ethylhexyl phthalate based on graphene quantum dots decorated TiO2 nanotube arrays

A photoelectrochemical (PEC) sensing platform for di-2-ethylhexyl phthalate (DEHP) was constructed using graphene quantum dots decorated TiO₂ nanotube arrays (GQDs-decorated TiO₂ NTs) as the transducer species and the anti-DEHP aptamer as the biological recognition element. GQDs were synthesized using the alkali-mediated hydrothermal method, and then anchored onto the TiO₂ NTs uniformly and intimately via pronounced electrostatic interaction. Coupling GQDs with TiO₂ NTs not only enhanced visible-light absorption, but promoted charge separation and transportation, exhibiting excellent photocurrent response, and PEC activity. Various means were conducted to explore morphologies, optical, structural and PEC properties of the materials. As an identification unit, the anti-DEHP aptamer molecules were immobilized on GQDs-decorated TiO₂ NTs using a cross-linking coupling method. The developed PEC sensing platform exhibits excellent sensing behavior for DEHP, and provides a low detection limit of 0.1 ng/L, high selectivity and stability. Meanwhile, its application in real environmental samples was evaluated and satisfying results were achieved. Thus, the established sensing platform provides a promising tool to detect DEHP in the environment.

A Visible Light Driven Photoelectrochemical Chloramphenicol Aptasensor Based on a Gold Nanoparticle-Functionalized 3D Flower-like MoS2/TiO2 Heterostructure

Developing a photoactive material by combining the characteristics of a wide light response range and effective separation of photogenerated electron-hole pairs remains a huge challenge for the construction of a photoelectrochemical (PEC) sensing platform. Herein, a gold nanoparticle (AuNP)/MoS₂/TiO₂ composite was prepared through the facile hydrothermal method coupled with an in situ photoreduction technology. Benefiting from both the compositional and structure merits, the composite not only extends the absorption range to visible light but also enhances the photoelectric conversion efficiency by transferring photogenerated electrons into the conduction band of semiconductors from the plasmonic AuNP. Meanwhile, the thiolated aptamers were attached to the surface of AuNP/MoS₂/TiO₂ composites through the Au-S bonding to construct a visible light driven PEC aptasensor for ultrasensitive detection chloramphenicol (CAP). In the presence of CAP, the aptamers anchored on the surface of the photoactive materials could specifically recognize CAP and interact with it to form a bioaffinity complex with a steric hindrance effect, resulting in the rapid decrease of photocurrent responses. Based on this photocurrent suppression strategy, the constructed PEC aptasensing platform exhibited a high sensitivity with a wide linear range from 5 pM to 100 nM and a low detection limit of 0.5 pM.

Engineering a NiAl-LDH/CoSx S-Scheme heterojunction for enhanced photocatalytic hydrogen evolution

The use of semiconductors to construct heterojunctions to suppress the rapid recombination of photogenerated charges and holes is considered to be an effective way to improve the efficiency of photocatalytic hydrogen evolution. Herein, cobalt sulfide (CoS_x) nanoparticles are cultivated in situ in the folds of three-dimensional flower-like nickel-aluminium layered double hydroxides (NiAl-LDHs) using a facile solvothermal method. The hydrogen production rate of the binary CoS_x/NiAl-LDH heterojunction reaches 3678.59 μmol/g/h, which is 83.74 and 22 times the rates of CoS_x and NiAl-LDH, respectively. The unique three-dimensional structure of NiAl-LDH facilitates the growth of CoS_x and shortens the transfer pathway of photogenerated electrons. More importantly, the built-in electric field formed at the interface and the S-type charge transport mechanism caused by the bending of the energy band enhance not only charge separation but also maintain the strong oxidation ability of the holes. In this study, the newly designed S-scheme heterojunction offers a new strategy for enhancing photocatalytic water splitting.

Ultrasensitive Photochemical Immunosensor Based on Flowerlike SnO2/BiOI/Ag2S Composites for Detection of Procalcitonin

Based on the necessity and urgency of detecting infectious disease marker procalcitonin (PCT), a novel unlabeled photoelectrochemical (PEC) immunosensor was prepared for the rapid and sensitive detection of PCT. Firstly, SnO2 porous nanoflowers with good photocatalytic performance were prepared by combining hydrothermal synthesis and calcining. BiOI nanoflowers were synthesized by facile ultrasonic mixed reaction. Ag2S quantum dots were deposited on SnO2/BiOI composites by in situ growth method. The SnO2/BiOI/Ag2S composites with excellent photoelectric properties were employed as substrate material, which could provide significantly enhanced and stable signal because of the energy level matching of SnO2, BiOI and Ag2S and the good light absorption performance. Accordingly, a PEC immunosensor based on SnO2/BiOI/Ag2S was constructed by using the layered modification method to achieve high sensitivity analysis of PCT. The linear dynamic range of the detection method was 0.50 pg·mL-1~100 ng·mL-1, and the detection limit was 0.14 pg·mL-1. In addition, the designed PEC immunosensor exhibited satisfactory sensitivity, selectivity, stability and repeatability, which opened up a new avenue for the analyzation of PCT and further provided guidance for antibiotic therapy.

Recognition and Selectivity Analysis Monitoring of Multicomponent Steroid Estrogen Mixtures in Complex Systems Using a Group-Targeting Environmental Sensor

The same class of steroid estrogen mixtures, coexisting in the environment of 17β-estradiol, estrone (E1), and ethinyl estradiol (EE2), have strong ability to disrupt the human endocrine system and are seriously prejudicial to the health of the organism and environmental safety. Herein, a highly sensitive and group-targeting environmental monitoring sensor was fabricated for a comprehensive analysis of multicomponent steroid estrogens (multi-SEs) in complex systems. This breakthrough was based on the highly sensitive photoelectrochemical response composite material CdSe NPs-TiO₂ nanotube and highly group-specific aptamers. The optimized procedure exhibited not only high sensitivity in a wide range of concentrations from 0.1 to 50 nM, indeed, the minimum detection limit was 33 pM, but also strong resistance to interference. The affinity and consistent action pockets of this sensor enable selective detection of multi-SEs in complex systems. It subsequently was applied for the analysis of multi-SEs from three real samples in the environment including medical wastewater, river water, and tap water to provide a means to clarify the fate of multi-SEs in the process of migration and transformation. This monitoring sensor has a brilliant application prospect for the identification and monitoring of the same class of endocrine-disrupting chemical mixtures in environmental complex systems.