Self-decoration of N-doped graphene oxide 3-D hydrogel onto magnetic shrimp shell biochar for enhanced removal of hexavalent chromium

Occurrence, fate, and potential impacts of wood preservatives in the environment: Challenges and environmentally friendly solutions

Wood preservation has gained global prevalence in recent years, primarily owing to the renewable nature of wood and its capacity to act as a carbon sink. Wood, in its natural form, lacks intrinsic resilience and is prone to decay if left untreated; hence, wood preservatives (WPs) are used to improve wood's longevity. The fate and potential hazards of wood preservatives to human health, ecosystems, and the environment are complex and depend on various aspects, including the type of the preservative compounds, their physicochemical properties, application methods, exposure pathways, environmental conditions, and safety measures and guidelines. The occurrence and distribution of WPs in environmental matrices such as soil and water can result in hazardous pollutants seeping into surface water, groundwater, and soil, posing health hazards, and polluting the environment. Bioremediation is crucial to safeguarding the environment and effectively removing contaminants through hydrolytic and/or photochemical reactions. Phytoremediation, vermicomposting, and sustainable adsorption have demonstrated significant efficacy in the remediation of WPs in the natural environment. Adsorbents derived from biomass waste have been acknowledged for their ability to effectively remove WPs, while also offering cost-efficiency and environmental sustainability. This paper aims to identify wood preservatives' sources and fate in the environment and present a comprehensive overview of the latest advancements in environmentally friendly methods relevant to the removal of the commonly observed contaminants associated with WPs in environmental matrices.

Recyclable adsorption removal and fluorescent monitoring of hexavalent chromium by electrospun nanofibers membrane derived from Tb3+ coordinating polyarylene ether amidoxime

Emerging technologies or advanced materials which can simultaneously adsorb and detect highly toxic Cr(VI) are urgently in demand for environmental remediation. Herein, we have designed and synthesized a functional polyarylene ether with aromatic main chain and pendent carboxyl groups along with amidoxime group that can be coordinated with different metal ions. Thanks to its versatile activation of the lanthanide ions' inherent fluorescence and good processability, the fluorescent nanofiber membranes with competitive Cr(VI) adsorption and detection performance have been fabricated via one-step electrospinning of mixed solution containing synthesized polymer and terbium salt. More specifically, the optimized nanofiber membrane exhibits a maximal Cr(VI) adsorption of 278.2 mg/g and specific detection for hexavalent chromium down to 11.76 nM. More importantly, the prepared fluorescent nanofiber membranes can be easily re-generated and re-used for both Cr(VI) adsorption and detection for five times. Given the unique advantages of easy fabrication, competitive dual functionalities as well as good reusability of electrospun fluorescent nanofiber membranes, the present work basically opens up new insight in the design of multifunctional recyclable material for the remediation of heavy metal pollution.

Synergistic mechanisms for the superior sorptive removal of aquatic pollutants via functionalized biochar-clay composite

This study investigated the successful synthesis of functionalized algal biochar-clay composite (FBKC). Subsequently, the sorption performance of FBKC towards norfloxacin (NFX) antibiotic and crystal violet dye (CVD) from water was extensively assessed in both batch and continuous flow systems. A series of characterization techniques were carried out for FBKC and the utilized precursors, indicating that the surface area of FBKC was increased thirty-fold with a well-developed pore structure compared to the original precursors. FBKC demonstrated a maximum sorption capacity of 192.80 and 281.24 mg/g for NFX and CVD, respectively. The suited fitting of the experimental data to Freundlich and Clark models suggested multi-layer sorption of NFX/CVD molecules. The mechanistic studies of NFX/CVD sorption onto FBKC unveiled multiple mechanisms, including π-π interaction, hydrogen bonding, electrostatic attraction, and surface/pore filling effect. The estimated cost of 5.72 €/kg and superior sorption capacity makes FBKC an efficient low-cost sorbent for emergent water pollutants.

The Removal of Pollutants from Wastewater Using Magnetic Biochar: A Scientometric and Visualization Analysis

In recent years, the use of magnetic biochar in wastewater treatment has shown significant effects and attracted scholars' attention. However, due to the relatively short research time and the lack of systematic summaries, it is difficult to provide a more in-depth analysis. This study utilizes RStudio and CiteSpace software to comprehensively analyze the research trends and progress of magnetic biochar in wastewater treatment. The analysis of bibliometrics is performed on 551 relevant papers retrieved from the Web of Science, spanning the period between 2011 and 2022. The most influential countries, institutions, journals, disciplinary distribution, and top 10 authors and papers in this field have been identified. The latest dataset has been used for keyword clustering and burst analysis. The results indicated that: (1) Bin Gao is the most influential author in this field, and high-level journals such as Bioresource Technology are more inclined to publish articles in the field of magnetic biochar. (2) Research in this field has predominantly focused on the removal of heavy metals and organic compounds. Keyword burst analysis shows a shift in research direction towards the removal of complex organic pollutants recently. (3) For the future development of magnetic biochar, an environment-friendly approach, economic viability, and joint technology are the directions that need more exploration. Finally, this paper provides a summary of the various adsorption mechanisms of magnetic biochar and several common modification methods, aiming to assist scholars in their research endeavors.

Simultaneously Cationic and Anionic Dyes Elimination via Magnetic Hydrochar Prepared from Copper Slag and Pinewood Sawdust

In practical wastewater, cationic and anionic dyes usually coexist, while synergistic removal of these pollutants is difficult due to their relatively opposite properties. In this work, copper slag (CS) modified hydrochar (CSHC) was designed as functional material by the one-pot method. Based on characterizations, the Fe species in CS can be converted to zero-valent iron and loaded onto a hydrochar substrate. The CSHC exhibited efficient removal rates for both cationic dyes (methylene blue, MB) and anionic dyes (methyl orange, MO), with a maximum capacity of 278.21 and 357.02 mg·g^-1, respectively, which was significantly higher than that of unmodified ones. The surface interactions of MB and MO between CSHC were mimicked by the Langmuir model and the pseudo-second-order model. In addition, the magnetic properties of CSHC were also observed, and the good magnetic properties enabled the adsorbent to be quickly separated from the solution with the help of magnets. The adsorption mechanisms include pore filling, complexation, precipitation, and electrostatic attraction. Moreover, the recycling experiments demonstrated the potential regenerative performance of CSHC. All these results shed light on the co-removal of cationic and anionic contaminates via these industrial by-products derived from environmental remediation materials.

Electrochemical treatment of aquaculture wastewater effluent and optimization of the parameters using response surface methodology

The electrocoagulation (EC) and electrooxidation (EO) processes are employed widely as treatment processes for industrial, agricultural, and domestic wastewater. In the present study, EC, EO, and a combination of EC + EO were evaluated as methods of removing pollutants from shrimp aquaculture wastewater. Process parameters for electrochemical processes, including current density, pH, and operation time were studied, and response surface methodology was employed to determine the optimum condition for the treatment. The effectiveness of the combined EC + EO process was assessed by measuring the reduction of targeted pollutants, including dissolved inorganic nitrogen species, total dissolved nitrogen (TDN), phosphate, and soluble chemical oxygen demand (sCOD). Using EC + EO process, more than 87% reduction was achieved for inorganic nitrogen, TDN, and phosphate, while 76.2% reduction was achieved for sCOD. These results demonstrated that the combined EC + EO process provided better treatment performance in removing the pollutants from shrimp wastewater. The kinetic results suggested that the effects of pH, current density, and operation time were significant on the degradation process when using iron and aluminum electrodes. Comparatively, iron electrodes were effective at reducing the half-life (t_1/2) of each of the pollutants in the samples. The application of the optimized process parameters on shrimp wastewater could be used for large-scale treatment in aquaculture.

Highly compressible and macro-porous hydrogels via the synergy of cryogelation and double-network for efficient removal of Cr(VI)

Mechanically robust and macro-porous hydrogels are urgently required for the dynamic removal of heavy metals in wastewater purification field. Herein, a novel microfibrillated cellulose/polyethyleneimine hydrogel (MFC/PEI-CD) with high compressibility and macro-porous structures was fabricated via the synergy of cryogelation and double-network for Cr(VI) adsorption from wastewater. MFCs were pre-cross-linked by bis(vinyl sulfonyl)methane (BVSM) and then formed double-network hydrogels with PEIs and glutaraldehyde below freezing. The SEM showed that the MFC/PEI-CD possessed interconnected macropores with an average pore diameter of 52 μm. Mechanical tests indicated a high compressive stress of 116.4 kPa at 80 % strain, which was 4 times higher than the corresponding MFC/PEI with a single-network. The Cr(VI) adsorption performance of MFC/PEI-CDs was systematically investigated under different parameters. Kinetic studies indicated that the adsorption process was well described by the pseudo-second-order model. Isothermal adsorption behaviors accorded well with Langmuir model with the maximum adsorption capacity of 545.1 mg/g, which was superior to most adsorption materials. More importantly, the MFC/PEI-CD was applied to dynamically adsorb Cr(VI) with the treatment volume of 2070 mL/g. Therefore, this work demonstrates that the synergy of cryogelation and double-network is a novel method for preparing macro-porous and robust materials with promising heavy metal removal from wastewater.

Adsorption of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar to Sb3+: Application of DFT calculation

The pollution and harm of Sb³⁺ to aquatic systems is a global problem, so Sb³⁺ removal from the water environment to make sure environment safety and human beings wellbeing is of urgency. This study explored the effect of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar (CEBC) on adsorbing Sb³⁺ through batch adsorption experiments. The experiments indicated CEBC's maximum adsorption capacity to Sb³⁺ is 170.15 mg·g^-1. Meanwhile, the capacity of the original biochar (EBC) is only 9.97 mg·g^-1. Compared with EBC, CEBC contains more functional groups, such as CO, -OH and -NH₂. In addition, the pseudo-second-order kinetic model and the Langmuir model are fit to describe the kinetics and isotherms of adsorption of CEBC to Sb³⁺, which suggests that the adsorption of CEBC to Sb³⁺ is dominated by monolayer chemisorption. Density functional theory (DFT) calculations confirmed that the chelation between -NH₂ and Sb³⁺ is of significance in the adsorption process of CEBC. DFT calculations also found that the newly added -OH and CO in EBC have a synergistic enhancement effect on the absorption of Sb³⁺. The mechanism of CEBC absorbing Sb³⁺ includes electrostatic interactions, pore filling, Л-Л interactions, hydrogen bonding, functional group complexation, chelation, and oxidation. CEBC has an excellent anti-interference ability for inorganic anions (NO₃^-, SO₄^2- and Cl^-) and can also use the coexisting HA to improve its adsorption performance. In addition, CEBC has better mitigation of Sb³⁺ on the performance of Sb³⁺ about its secondary release and good reproducibility, which indicates that CEBC is a viable Sb³⁺ adsorbent.

Large-flake graphene-modified biochar for the removal of bisphenol S from water: rapid oxygen escape mechanism for synthesis and improved adsorption performance

The combined effects of graphene and biochar for enhanced adsorption of organic pollutants have not been demonstrated yet. Therefore, the mechanisms of graphene-modified biochar synthesis and its application to adsorption of contaminants remain unclear. In this study, the effect of flake-size graphene on biochar modification and its bisphenol S (BPS) adsorption performance was explored for the first time. Three sizes of graphene oxide were used as the precursor to prepare graphene/biochar composites using pyrolysis. It was found that the graphene with a small flake size was interspersed in the macropores of biochar, while the biochar was completely or mostly wrapped by the large-sized graphene sheet, which effectively prevented the agglomeration and pore blockage of biochar. Large-flake graphene oxide modified biochar (LGB) showed the highest adsorption capacity towards BPS, exhibiting 2.8 times higher adsorption than pristine biochar. Density functional theory (DFT) calculation suggested that the maximum diffusion barrier of O atoms in graphene coated cellulose (most frequently used biochar representative) could be reduced significantly (∼46%) at pyrolysis temperature of 873 K. Taking the advantage of small amount of graphene and enhanced adsorption performance, LGB could be a promising adsorbent for the removal of certain organic pollutants from wastewater and is conducive for the development of high-valued biochar modification.

Modified and pristine biochars for remediation of chromium contamination in soil and aquatic systems

Chromium (Cr) contamination in soil and water poses high toxicity risks to organisms and threatens food and water security worldwide. Biochar has emerged as a promising material for cleaning up Cr contamination owing to biochar's strong capacity to immobilize Cr. This paper synthesizes information on biochar modification for the efficient remediation of Cr contamination in soil and water, and critically reviews mechanisms of Cr adsorption on pristine and modified biochars. Biochar modification methods include physical activation via ball milling or ultraviolet irradiation, chemical activation via magnetization, alkali/acid treatment, nano-fabrication or loading of reductive agents, and biological activation via integrating biochars with microorganisms and their metabolites. Modified biochars often have multi-fold enhancement in Cr adsorption/reduction capacity than pristine biochars. Iron (Fe)-supported magnetic biochars have the most promising Cr removal abilities with high reusability of the biochars. Pre-pyrolysis modification with Fe could load Fe₃O₄ micro-/nanoparticles on biochars, and increase the surface area and electrostatic attraction between chromate anions and biochar surfaces, and reduce Cr(VI) to Cr(III). Post-pyrolysis modification could enrich oxygen-containing functional groups such as CO and -OH on biochar surfaces and promote Cr reduction and adsorption. Future research directions for Cr mitigation using advanced biochar products are discussed in this review.

Removal of hexavalent chromium via biochar-based adsorbents: State-of-the-art, challenges, and future perspectives

Chromium originates from geogenic and extensive anthropogenic activities and significantly impacts natural ecosystems and human health. Various methods have been applied to remove hexavalent chromium (Cr(VI)) from aquatic environmental matrices, including adsorption via different adsorbents, which is considered to be the most common and low-cost approach. Biochar materials have been recognized as renewable carbon sorbents, pyrolyzed from various biomass at different temperatures under limited/no oxygen conditions for heavy metals remediation. This review summarizes the sources, chemical speciation & toxicity of Cr(VI) ions, and raw and modified biochar applications for Cr(VI) remediation from various contaminated matrices. Mechanistic understanding of Cr(VI) adsorption using different biochar-based materials through batch and saturated column adsorption experiments is documented. Electrostatic interaction and ion exchange dominate the Cr(VI) adsorption onto the biochar materials in acidic pH media. Cr(VI) ions tend to break down as HCrO₄^-, CrO₄^2-, and Cr₂O₇^2- ions in aqueous solutions. At low pH (∼1-4), the availability of HCrO₄^- ions attributes the electrostatic forces of attraction due to the available functional groups such as -NH₄⁺, -COOH, and -OH₂⁺, which encourages higher adsorption of Cr(VI). Equilibrium isotherm, kinetic, and thermodynamic models help to understand Cr(VI)-biochar interactions and their adsorption mechanism. The adsorption studies of Cr(VI) are summarized through the fixed-bed saturated column experiments and Cr-contaminated real groundwater analysis using biochar-based sorbents for practical applicability. This review highlights the significant challenges in biochar-based material applications as green, renewable, and cost-effective adsorbents for the remediation of Cr(VI). Further recommendations and future scope for the implications of advanced novel biochar materials for Cr(VI) removal and other heavy metals are elegantly discussed.

Enhanced sorption of trivalent antimony by chitosan-loaded biochar in aqueous solutions: Characterization, performance and mechanisms

Contamination of aquatic systems by antimony (Sb) is a worldwide issue due to its risks to eco-environment and human health. Batch sorption experiments were conducted to assess the equilibrium, kinetics and thermodynamics of antimonite [Sb(III)] sorption by pristine biochar (BC) and chitosan-loaded biochar (CHBC) derived from branches of Ficus microcarpa. Results showed the successful loading of chitosan onto biochar surface, exhibiting more functional groups (e.g., CO, -NH₂, and -OH). Langmuir model well described the Sb(III) sorption isotherm experimental data, and the maximum sorption capacity of Sb(III) by CH₁BC (biochar loaded with chitosan at a ratio of 1:1) was 168 mg g^-1, whereas for the BC it was only 10 mg g^-1. X-ray photoelectron spectroscopy demonstrated that CH₁BC oxidized 86% of Sb(III) to Sb(V), while BC oxidized 71% of Sb(III). Density functional theory calculations suggested that the synergistic effect of exogenous hydroxyl and inherent carbonyl contributed to the enhanced removal efficiency of Sb(III) by CHBC. Key mechanisms for Sb(III) sorption onto CHBCs included electrostatic interaction, chelation, surface complexation, π-π interaction, and hydrogen bonding. Overall, this study implies that CHBC can be a new, viable sorbent for the removal of Sb(III) from aquatic systems aiding their safe and sustainable management.

Remediation of emerging metal pollutants using environment friendly biochar- Review on applications and mechanism

Bioremediation of heavy metals has become a major environmental concern due to their bio resistant nature and tendency to accumulate. Application of various technologies, involving physical and chemical working principles are applied and passive uptake using sorption involving eco-friendly substrates gained significant attention. Biochar, a cheaper and efficient material, offers good potential due to the greater ease of production, treatment and disposal. This review focuses on the effective application of biochar to treat water contaminated by three specific heavy metals: chromium, lead and arsenic. The on-field applications like soil amendment, industrial wastewater treatment and groundwater treatment using biochar are highlighted. The review article describes the feedstock available for biochar production, various production processes and the importance of optimum conditions like pyrolysis temperature, rate and retention time for various feedstocks reported in literature. The energy requirement of the production process can be supplied by its own energy output. Various modifications that are suitable for the biochar from distinct feedstocks are also discussed. The removal performance of biochar at different working conditions like pH, initial concentration of pollutant and adsorbent dose are consolidated. The highest removal efficiencies reported were by coconut shell biochar (Cr - 99.9%), canola straw biochar (Pb - 100%) and perilla leaf biochar (As - 100%). The adsorption mechanism is explained with reference to kinetics, isotherms, and molecular dynamics. Adsorption mechanism of most of the biochars was found to fit either Freundlich or Langmuir isotherm.

A state-of-the-art review on producing engineered biochar from shellfish waste and its application in aquaculture wastewater treatment

Global production of shellfish aquaculture is steadily increasing owing to the growing market demands for shellfish. The intensification of shellfish aquaculture to maximize production rate has led to increased generation of aquaculture waste streams, particularly the effluents and shellfish wastes. If not effectively managed, these wastes could pose serious threats to human health and the ecosystem while compromising the overall sustainability of the industry. The present work comprehensively reviews the source, composition, and environmental implications of shellfish wastes and aquaculture wastewater. Moreover, recent advancements in the valorization of shellfish wastes into value-added biochar via emerging thermochemical and modification techniques are scrutinized. The utilization of the produced biochar in removing emerging pollutants from aquaculture wastewater is also discussed. It was revealed that shellfish waste-derived biochar exhibits relatively higher adsorption capacities (300-1500 mg/g) compared to lignocellulose biochar (<200 mg/g). The shellfish waste-derived biochar can be effectively employed for the removal of various contaminants such as antibiotics, heavy metals, and excessive nutrients from aquaculture wastewater. Finally, future research priorities and challenges faced to improve the sustainability of the shellfish aquaculture industry to effectively support global food security are elaborated. This review envisages that future studies should focus on the biorefinery concept to extract more useful compounds (e.g., carotenoid, chitin) from shellfish wastes for promoting environmental-friendly aquaculture.

Biochar for agronomy, animal farming, anaerobic digestion, composting, water treatment, soil remediation, construction, energy storage, and carbon sequestration: a review

In the context of climate change and the circular economy, biochar has recently found many applications in various sectors as a versatile and recycled material. Here, we review application of biochar-based for carbon sink, covering agronomy, animal farming, anaerobic digestion, composting, environmental remediation, construction, and energy storage. The ultimate storage reservoirs for biochar are soils, civil infrastructure, and landfills. Biochar-based fertilisers, which combine traditional fertilisers with biochar as a nutrient carrier, are promising in agronomy. The use of biochar as a feed additive for animals shows benefits in terms of animal growth, gut microbiota, reduced enteric methane production, egg yield, and endo-toxicant mitigation. Biochar enhances anaerobic digestion operations, primarily for biogas generation and upgrading, performance and sustainability, and the mitigation of inhibitory impurities. In composts, biochar controls the release of greenhouse gases and enhances microbial activity. Co-composted biochar improves soil properties and enhances crop productivity. Pristine and engineered biochar can also be employed for water and soil remediation to remove pollutants. In construction, biochar can be added to cement or asphalt, thus conferring structural and functional advantages. Incorporating biochar in biocomposites improves insulation, electromagnetic radiation protection and moisture control. Finally, synthesising biochar-based materials for energy storage applications requires additional functionalisation.

Outstanding performance of sulfurated titanomaghemite (Fe2TiO5) for hexavalent chromium removal: Sulfuration promotion mechanism and its application in chromium resource recovery

A lot of magnetic sorbents have been developed to meet the current demand for removing Cr (VI) from wastewater. However, the application of magnetic sorbents remains restricted by the unsatisfactory Cr (VI) removal efficiency, sorbent regeneration, and safe disposition of adsorbed Cr species. In this study, magnetic titanomaghemite (Fe₂TiO₅) was sulfurated with gaseous H₂S to improve its Cr (VI) removal efficiency. Sulfuration significantly improved the Cr (VI) removal efficiency of Fe₂TiO₅ from 3%-14% to 27%-82% at pH 4-10 due to drastically increased the electrostatic adsorption of Cr (VI) and heterogeneous reduction of adsorbed Cr (VI) to Cr (III). Furthermore, the sulfurated Fe₂TiO₅ recovered using magnetic separation can be regenerated by re-sulfuration without degrading the Cr (VI) removal efficiency, therefore, sulfurated Fe₂TiO₅ can be recycled for Cr (VI) removal after the regeneration. Moreover, Cr (VI) in aqueous solution can be enriched on sulfurated Fe₂TiO₅ after multiple adsorptions in the form of Cr₂O₃ in a content of more than 30% what can be considered as a source of chrome ore. Therefore, sulfurated Fe₂TiO₅ may be a promising, low-cost, and environment-friendly sorbent for Cr recovery as a co-benefit of Cr (VI) removal from wastewater.

Enhanced removal of Cr(VI) by nitrogen-doped hydrochar prepared from bamboo and ammonium chloride

N-doped biochar can effectively eliminate toxic Cr(VI). Here, N-doped hydrochar (NHC) was successfully synthesized by one-pot hydrothermal carbonization (HTC) of NH₄Cl and bamboo, and employed to adsorb Cr(VI). The specific surface area, pore volume, and carbon and nitrogen contents of NHC all increase compared with the undoped hydrochar (HC). NH₄Cl acts as a cheap nitrogen source to enhance the nitrogen content of hydrochar and as an acid catalyst to accelerate hydrochar carbonization. Adsorption experiments show NHC has higher adsorption capacity than HC for Cr(VI). XPS and FTIR imply the dominant mechanisms of adsorbing Cr(VI) onto two hydrochars are electrostatic attraction, reduction and complexation, but the contributions of surface functional groups in two hydrochars for elimination of Cr(VI) differ. The doped nitrogen in NHC is pivotal in adsorbing and reducing Cr(VI). Hence, NHC prepared from bamboo and NH₄Cl by one-step HTC is a cheap and efficient adsorbent to eliminate aqueous Cr(VI).

Sustainable biochar/MgFe2O4 adsorbent for levofloxacin removal: Adsorption performances and mechanisms

The limitation of low efficiency and complicated separation after adsorption make the practical application of biochar a huge challenge. Here, one pomelo peel-derived magnetic biochar composite, biochar supported MgFe₂O₄ (BMF) was fabricated and adopted for Levofloxacin (LFX) adsorption. Adsorption behaviors and mechanisms were investigated by characterization analysis, batch experiments, and data modeling. Results indicated that adsorption could be strikingly influenced by pyrolysis temperature. Adsorption kinetic was well fitted by pseudo-second-order model. Adsorption isotherm was best fitted with Freundlich model. The maximum adsorption capacity was 115 mg g^-1. Moreover, hydrophobic effect played a limited contribution according to dual-mode model analysis. LFX adsorption was spontaneous and endothermic. Adsorption mechanisms were ascribed to electrostatic interactions, H-bonding, functional groups complexation, and π-π electron donor-acceptor interactions. Besides that, BMF had the potential for repeated use. This research proposed a novel and promising method for LFX or other antibiotics adsorption removal.

Preparation and characterization of nano-galvanic bimetallic Fe/Sn nanoparticles deposited on talc and its enhanced performance in Cr(VI) removal

In this study, talc-supported nano-galvanic Sn doped nZVI (Talc-nZVI/Sn) bimetallic particles were successfully synthesized and utilized for Cr(VI) remediation. Talc-nZVI/Sn nanoparticles were characterized by FESEM, EDS, FTIR, XRD, zeta potential, and BET analysis. The findings verified the uniform dispersion of nZVI/Sn spherical nanoparticles on talc surface with a size of 30-200 nm, and highest specific surface area of 146.38 m2/g. The formation of numerous nano-galvanic cells between nZVI core and Sn shell enhanced the potential of bimetallic particles in Cr(VI) mitigation. Moreover, batch experiments were carried out to investigate optimum conditions for Cr(VI) elimination and total Cr(VI) removal was achieved in 20 min using Sn/Fe mass ratio of 6/1, the adsorbent dosage of 2 g/L, initial Cr(VI) concentration of 80 mg/L, at the acidic environment (pH = 5) and temperature of 303 K. Besides, co-existing of metallic cations turned out to facilitate the electron transfer from the nano-galvanic couple of NZVI/Sn, and suggested the revolution of bimetallic particles to trimetallic composites. The aging study of the nanocomposite confirmed its constant high activity during 60 days. The removal reaction was well described by the pseudo-second-order kinetic and the modified Langmuir isotherm models. Overall, due to the synergistic galvanic cell effect of nZVI/Sn nanoparticles and full coverage of active sites by Sn layer, Talc-nZVI/6Sn was utilized as a promising nanocomposite for fast and highly efficient Cr(VI) elimination.