Difunctional covalent organic framework hybrid material for synergistic adsorption and selective removal of fluoroquinolone antibiotics

An Eu (III)-functionalized covalent organic framework fluorescent probe for specific detection of Flumequine based on pore restriction and antenna effect

The overuse of quinolone antibiotics has led to a series of health and environmental issues. Herein, we combine the distinct luminescence properties of Eu3+ with the unique structure of covalent organic frameworks (COFs) to develop a precise and sensitive fluorescent probe for detecting Flumequine (Flu) in water. Eu3+ is thoroughly anchored into the channels of COFs as recognition sites, while the synthesized probe material still maintains its intact framework structure. The unique structure of COFs provides excellent support and protection for Eu3+. Therefore, COF-Eu can rapidly bind with Flu which can transfer the absorbed energy to Eu3+ through an "antenna effect", resulting in red fluorescence. Moreover, there is a good linear relationship between Flu concentration in the range of 0-30 µM, with a detection limit of 41 nM. Simultaneously, the material maintains remarkable reproducibility, with its performance remaining almost unchanged after five cycles of use. Remarkably, the probe demonstrates excellent Flu recovery rates in real samples. This study provides a viable approach for the recognition of flumequine in the environment through a customized fluorescence detection method.

Integrated Eu3+ loaded covalent organic framework with smartphone for ratiometric fluorescence detection of tetracycline

Developing rapid tetracycline sensing system is of great significance to monitor the illegal addition to drugs and pollution to food and ecosystem. By loading covalent organic frameworks (COFs) with Eu3+, a new hybridized material (COF@Eu3+) was prepared for tetracycline determination. Based on the Schiff base reaction, the COFs were by synthesized through solvent evaporation in 30 min at room temperature. Thereafter, Eu3+ was modified into COFs to develop the COF@Eu3+ sensing platform by adsorption and coordination. In presence of tetracycline, tetracycline can displace water molecules and coordinate with Eu3+ through the antenna effect. As a result, the red fluorescence of Eu3+ was enhanced by tetracycline with green fluorescence of COF as a reference. The developed ratiometric fluorescence sensor exhibits a linear range of 0.1-20 μM for detecting tetracycline with a detection limit of 30 nM. Integrated with a smartphone, the rapid tetracycline detection can be realized in situ, which is potential for high-throughput screening of tetracycline contaminated samples. Furthermore, the COF@Eu3+ fluorescence sensor has been successfully applied to the detection of tetracycline in traditional Chinese medicine compound preparation with satisfied recoveries. Therefore, a smartphone-assisted device was successfully developed based on Eu3+-functionalized COF, which is an attractive candidate for further applications of fluorescence sensing and visual detection.

Amidation modified hollow composite microspheres as a self-floating adsorbent for efficient capture of anionic dye DB86 and heavy metal nickel (II)

The co-contamination of dyes and heavy metal ions often used as mordants poses potential risks to environment and public health, and is a challenging problem that needs to be solved in water treatment. Meanwhile, improving the solid-liquid separation capability of adsorbents is of great significance for the application of adsorption technology. Herein, amidation modified hollow composite microspheres were prepared using hollow glass microsphere (HGM) as matrix through hydrolysis and condensation of silane coupling agent (A-1100) and subsequent amidation reaction. The material (HGMNE) not only exhibited good adsorption performance for DB86 and Ni2+ but also had stable self-floating capability. The adsorption of DB86 by HGMNE is mainly carried out by the electrostatic interaction between positively charged quaternary amine nitrogen and negatively charged DB86, while the adsorption of Ni2+ is achieved by the carboxyl group in EDTA group through complexation interaction to adsorb Ni2+ to form Ni complex. This research not only is devoted to the utilization of HGMNE to achieve the co-removal of DB86 and Ni2+ and flexible self-floating solid-liquid separation but also verifies the feasibility and applicability of the modification method of introducing organic adsorption functional groups through amidation reaction, so as to expand the preparation path of HGM-based adsorbents.

Co2+ coordination-assisted molecularly imprinted covalent organic framework for selective extraction of ochratoxin A

Covalent organic frameworks (COFs) are attractive materials for sample pretreatment due to their tunable structures and functions. However, the precise recognition of contaminant in complex environmental matrices by COFs remains challenging owing to their insufficient specific active sites. Herein, we report Co2+ coordination-assisted molecularly imprinted flexible COF (MI-COF@Co2+) for selective recognition of ochratoxin A (OTA). The MI-COF@Co2+ was prepared via one-step polymerization of 3,3-dihydroxybenzidine, 2,4,6-tris(4-formylphenoxy)- 1,3,5-triazine, Co2+ and template. The flexible units endowed COFs with the self-adaptable ability to regulate the molecular conformation and coordinate with Co2+ to locate the imprinted cavities. The coordination interaction greatly improved the adsorption capacity and selectivity of MI-COF@Co2+ for OTA. The prepared MI-COF@Co2+ was used as solid phase extraction adsorbent for high-performance liquid chromatography determination of OTA with the detection limit of 0.03 ng mL-1 and the relative standard deviation of < 2.5 %. In addition, this method permitted interference-free determination of OTA in real samples with recovery from 89.5 % to 102.8 %. This work provides a simple way to improve the selectivity of COFs for the determination of hazardous compounds in complex environments.

Covalent-Organic Frameworks for Selective and Sensitive Detection of Antibiotics from Water

As the consumption of antibiotics rises, they have generated some negative impacts on organisms and the environment because they are often unable to be effectively degraded, and seeking effective detection methods is currently a challenge. Covalent-organic frameworks (COFs) are new types of crystalline porous crystals created based on the strong covalent interactions between blocked monomers, and COFs demonstrate great potential in the detection of antibiotics from aqueous solutions because of their large surface area, adjustable porosity, recyclability, and predictable structure. This review aims to present state-of-the-art insights into COFs (properties, classification, synthesis methods, and functionalization). The key mechanisms for the detection of antibiotics and the application performance of COFs in the detection of antibiotics from water are also discussed, followed by the challenges and opportunities for COFs in future research.

Facile construction of a stable core-shell spherically magnetic polyimide covalent organic framework for efficient extraction of phenylurea herbicides

Efficient enrichment is crucial for the highly sensitive monitoring of phenylurea herbicides (PUHs) in various environmental waters. In this work, a stable core-shell spherically magnetic polyimide covalent organic framework (COF) was synthesized via a simple template-mediated precipitation polymerization method under mild conditions using tri(4-aminophenyl)amine (TAPA) and 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA) as the building units (denoted as Fe3O4@TAPA-BPDA). The Fe3O4@TAPA-BPDA exhibits remarkable adsorption performance for PUHs with an optimized adsorption time of only 10 min. The adsorption of PUHs by Fe3O4@TAPA-BPDA followed the pseudo-second-order kinetic model and the Langmuir model. Furthermore, hydrogen bonding, halogen bonding, hydrophobic interaction, electro donor-acceptor interaction and π-π interactions are identified as the dominant mechanisms contributing to excellent adsorption performance. It was demonstrated that halogen bonds play an important role in the adsorption of substances containing chlorine atoms. The Fe3O4@TAPA-BPDA is easy to operate and highly regenerable. A simple magnetic solid-phase extraction (MSPE) method based on the Fe3O4@TAPA-BPDA was then developed for the rapid extraction of five PUHs in real samples, coupled with high-performance liquid chromatography (HPLC) determination. The analytical method developed has a linear range of 0.5-50 ng/mL, and the limit of detection (LOD) ranges from 0.06 to 0.10 ng/mL. The method exhibits good accuracy with recoveries ranged from 74.5 % to 111.4 %. The analytical method was successfully applied to the highly sensitive detection of PUHs in environmental water samples, which highlighting the potential application of the Fe3O4@TAPA-BPDA in the sample pretreatment.

Exploring the environmental pathways and challenges of fluoroquinolone antibiotics: A state-of-the-art review

Fluoroquinolone (FQ) antibiotics have become a subject of growing concern due to their increasing presence in the environment, particularly in the soil and groundwater. This review provides a comprehensive examination of the attributes, prevalence, ecotoxicity, and remediation approaches associated with FQs in environmental matrices. The paper discusses the physicochemical properties that influence the fate and transport of FQs in soil and groundwater, exploring the factors contributing to their prevalence in these environments. Furthermore, the ecotoxicological implications of FQ contamination in soil and aquatic ecosystems are reviewed, shedding light on the potential risks to environmental and human health. The latter part of the review is dedicated to an extensive analysis of remediation approaches, encompassing both in-situ and ex-situ methods employed to mitigate FQ contamination. The critical evaluation of these remediation strategies provides insights into their efficacy, limitations, and environmental implications. In this investigation, a correlation between FQ antibiotics and climate change is established, underlining its significance in addressing the Sustainable Development Goals (SDGs). The study further identifies and delineates multiple research gaps, proposing them as key areas for future investigational directions. Overall, this review aims to consolidate current knowledge on FQs in soil and groundwater, offering a valuable resource for researchers, policymakers, and practitioners engaged in environmental management and public health.

Constructing ordered and tunable extrinsic porosity in covalent organic frameworks via water-mediated soft-template strategy

As one of the most attractive methods for the synthesis of ordered hierarchically porous crystalline materials, the soft-template method has not appeared in covalent organic frameworks (COFs) due to the incompatibility of surfactant self-assembly and guided crystallization process of COF precursors in the organic phase. Herein, we connect the soft templates to the COF backbone through ionic bonds, avoiding their crystallization incompatibilities, thus introducing an additional ordered arrangement of soft templates into the anionic microporous COFs. The ion exchange method is used to remove the templates while maintaining the high crystallinity of COFs, resulting in the construction of COFs with ordered hierarchically micropores/mesopores, herein named OHMMCOFs (OHMMCOF-1 and OHMMCOF-2). OHMMCOFs exhibit significantly enhanced functional group accessibility and faster mass transfer rate. The extrinsic porosity can be adjusted by changing the template length, concentration, and ratio. Cationic guanidine-based COFs (OHMMCOF-3) are also constructed using the same method, which verifies the scalability of the soft-template strategy. This work provides a path for constructing ordered and tunable extrinsic porosity in COFs with greatly improved mass transfer efficiency and functional group accessibility.

A review on carbon-based biowaste and organic polymer materials for sustainable treatment of sulfonamides from pharmaceutical wastewater

Frequent detection of sulfonamides (SAs) pharmaceuticals in wastewater has necessitated the discovery of suitable technology for their sustainable remediation. Adsorption has been widely investigated due to its effectiveness, simplicity, and availability of various adsorbent materials from natural and artificial sources. This review highlighted the potentials of carbon-based adsorbents derived from agricultural wastes such as lignocellulose, biochar, activated carbon, carbon nanotubes graphene materials as well as organic polymers such as chitosan, molecularly imprinted polymers, metal, and covalent frameworks for SAs removal from wastewater. The promising features of these materials including higher porosity, rich carbon-content, robustness, good stability as well as ease of modification have been emphasized. Thus, the materials have demonstrated excellent performance towards the SAs removal, attributed to their porous nature that provided sufficient active sites for the adsorption of SAs molecules. The modification of physico-chemical features of the materials have been discussed as efficient means for enhancing their adsorption and reusable performance. The article also proposed various interactive mechanisms for the SAs adsorption. Lastly, the prospects and challenges have been highlighted to expand the knowledge gap on the application of the materials for the sustainable removal of the SAs.

Rapid and selective removal of aristolochic acid I in natural products by vinylene-linked iCOF resins

Rapid, efficient, and selective removal of toxicants such as aristolochic acid I (AAI) from complex natural product systems is of great significance for the safe use of herbal medicines or medicine-food plants. Addressing this challenge, we develop a high-performance separation approach based on ionic covalent organic frameworks (iCOFs) to separate and remove AAI. Two vinylene-linked iCOFs (NKCOF-46-Br- and NKCOF-55-Br-) with high crystallinity are fabricated in a green and scalable fashion via a melt polymerization synthesis method. The resulting materials exhibit a uniform morphology, high stability, fast equilibrium time, and superior affinity and selectivity for AAI. Compared to conventional separation media, NKCOF-46-Br- and NKCOF-55-Br- achieve the record high adsorption capacities of 246.0 mg g-1 and 178.4 mg g-1, respectively. Various investigations reveal that the positively charged framework and favorable pore microenvironment of iCOFs contribute to their high selectivity and adsorption efficiency. Moreover, the iCOFs exhibit excellent biocompatibility by in vivo toxicity assays. This study paves a new avenue for the rapid, selective and efficient removal of toxicants from complex natural systems.

Fabrication of zwitterionic magnetic microporous organic network for efficient extraction of fluoroquinolone antibiotics from meat samples

A zwitterionic magnetic microporous organic network (MMON-SO3H-NH2) with numerous amino and sulfonic acid ion-pare binding sites was designed and synthesized for efficient magnetic solid-phase extraction (MSPE) of fluoroquinolones (FQs) from meat samples. The core-shell MMON-SO3H-NH2 offered large specific surface area, rapid magnetic responsiveness, good stability, and multiple binding sites for FQs. The density functional theory and independent gradient model evaluations confirmed hydrogen bonding, π-π and ion-pair interactions between MMON-SO3H-NH2 and FQs. Under the optimal conditions, the established MMON-SO3H-NH2-MSPE-HPLC-UV method gave wide linear range (0.15-1000 μg L-1), low limits of detection (0.05-4.5 μg L-1) and limits of quantitation (0.15-13 μg L-1), and high enrichment factors (82.1-99.6) using 3 mg of adsorbent. This work demonstrates that the preparation of zwitterionic MONs is an efficient way to promote the extraction performance of MONs for zwitterionic targets and provides an effective sample pretreatment method for enriching and monitoring FQs in complex food matrices.

Surface imprinted-covalent organic frameworks for efficient solid-phase extraction of fluoroquinolones in food samples

Molecularly imprinting on covalent organic frameworks (MI-COF) is a promising way to prepare selective adsorbents for effective extraction of fluoroquinolones (FQs). However, the unstable framework structure and complex imprinting process are challenging for the construction of MI-COF. Here, we report a facile surface imprinting approach with dopamine to generate imprinted cavities on the surface of irreversible COF for highly efficient extraction of FQs in food samples. The irreversible-linked COF was fabricated from hexahydroxytriphenylene and tetrafluorophthalonitrile to ensure COF stability. Moreover, the introduction of dopamine surface imprinted polymer into COF provides abundant imprinted sites and endows excellent selectivity for FQs recognition against other antibiotics. Taking enrofloxacin as a template molecule, the prepared MI-COF gave an exceptional adsorption capacity of 581 mg g-1, a 2.2-fold enhancement of adsorption capacity compared with nonimprinted COF. The MI-COF was further explored as adsorbent to develop a novel solid-phase extraction method coupled with high-performance liquid chromatography for the simultaneous determination of enrofloxacin, norfloxacin and ciprofloxacin. The developed method gave the low limits of detection at 0.003-0.05 ng mL-1, high precision with relative standard deviations less than 3.5%. The recoveries of spiked FQs in food samples ranged from 80.4% to 110.7%.

Multivariate covalent organic frameworks guided carboxyl functionalized magnetic adsorbent for enrichment of fluoroquinolones in milk prior to high performance liquid chromatographic analysis

Herein, we prepared a carboxyl functionalized magnetic covalent organic framework (Fe3O4@iCOF-COOH) by combining multivariate synthetic strategy with post-synthetic modification. It was used as an adsorbent for magnetic solid phase extraction (MSPE) of six fluoroquinolones (FQs), and showed good absorption performance at neutral pH. Carboxyl groups are found to be crucial for the adsorption of fluoroquinolones. The adsorption mechanism was primarily attributed to strong hydrogen bonding, π-π interaction as well as potential hydrophobic effect. The optimal extraction conditions are sample pH at 6.0, adsorbent dosage of 3 mg, eluent of 1.0 mL methanol solution containing 7.5% ammonia, and extraction/desorption time of 30 min. Under the optimized conditions, the Fe3O4@iCOF-COOH was used as an adsorbent for MSPE of FQs in milk, an analytical method was established by combining with high-performance liquid chromatography-ultraviolet detection (HPLC-UV). The limits of detection (LODs) and limit of quantification (LOQs) were 1.24-4.58 ng⋅mL-1 and 4.12-15.3 ng⋅mL-1, respectively. The recoveries of target FQs in spiked milk were 68.4-105%. This work provides a new way to prepare covalent organic framework based adsorbents for solid phase extraction, and can be readily extended to other type of adsorbents.

In situ synthesis of multivariant zeolitic tetrazolate imidazole frameworks (ZTIFs) with uncoordinated N-heteroatom sites for efficient adsorption of antiviral drugs

The current outbreak of the coronavirus (COVID-19) pandemic has significantly increased the global usage of antiviral drugs (AVDs), leading to higher concentrations of antibiotics in water pollution. To address this current issue, a new kind of adsorbent named isostructural zeolitic tetrazolate imidazolate frameworks (ZTIFs) were synthesized by combining imidazole and tetrazolates into one self-assembly approach by adjusting pores and stability of frameworks. The incorporation of imidazole ligand progressively increased the stability of frameworks. Furthermore, increasing the content of tetrazolate ligand greatly improved the adsorption performance due to N-rich sites by increasing the pore size. The obtained adsorbent composite exhibits macroporous structure up to 53.05 nm with excellent structural stability. Owing to their macropores and highly exposed active sites, the synthesized ZTIFs exhibit the maximum adsorption capacity for oseltamivir (OT) and ritonavir (RT) of 585.2 mg/g and 435.8 mg/g, respectively. Moreover, the adsorption uptake and saturation process were rapid compared to simple MOF. Within 20 min, both pollutants achieved equilibrium. The adsorption isotherms were best interpreted by Pseudo second order kinetics. The adsorption of AVDs on ZTIFs was spontaneous, exothermic, and thermodynamically feasible. The DFT calculations and characterization results after adsorption demonstrate that π-π interaction, pore filling, surface complexation, and electrostatic interaction were the primary features of the adsorption mechanism. The prepared ZTIFs composite exhibits high chemical, mechanical and thermal stability and can be recycled multiple times without destroying its morphology and structure. The adsorbent regeneration for several cycles impacted the operational cost and the eco-friendly characteristic of the process.

Occurrence, distribution and their correlation with different parameters of antibiotics and antibiotic resistance genes in lakes of China: A review

The exposure of antibiotics and antibiotic resistance genes (ARGs) as potential threats to the environment has raised global concern. This study provides discussion on the emergence and distribution of antibiotics and ARGs in lakes. The correlation of critical water quality parameters with antibiotics and ARGs are evaluated along with their integrative potential ecological risk. Sulfonamides (∼67.18 ng/L) and quinolones (∼77.62 ng/L) were the dominant antibiotics distributed in the aqueous phase, while the quinolones and tetracyclines were the primary contamination factors in the sediment phase. The temporal and spatial distribution revealed that the antibiotic concentrations were significantly lower in summer than other seasons and the lakes in Hebei and Jiangsu provinces exhibited the highest antibiotic pollution. The detection frequency and relative abundance of sul1 gene have been the highest among all detected ARGs. Moreover, ARGs in lakes were driven by several factors, with bacterial communities and mobile genetic elements that prevailed the positive distribution of ARGs. Antibiotics have been identified as critical factors in inducing the propagation of ARGs, which could be further enhanced by chemical contaminants (e.g., heavy metals and nutrients). Involving the risk assessment strategies, research attention should be paid on three antibiotics (ofloxacin, sulfamethoxazole and erythromycin) to strengthen the policy and management of Baiyangdian Lake and East Dongting Lake. This review analysis will provide in-depth understanding to the researchers and policy-makers in formulation of strategies for remediation of antibiotic contamination in the lakes.

Recent perspective of antibiotics remediation: A review of the principles, mechanisms, and chemistry controlling remediation from aqueous media

Antibiotic pollution is an ever-growing concern that affects the growth of plants and the well-being of animals and humans. Research on antibiotics remediation from aqueous media has grown over the years and previous reviews have highlighted recent advances in antibiotics remediation technologies, perspectives on antibiotics ecotoxicity, and the development of antibiotic-resistant genes. Nevertheless, the relationship between antibiotics solution chemistry, remediation technology, and the interactions between antibiotics and adsorbents at the molecular level is still elusive. Thus, this review summarizes recent literature on antibiotics remediation from aqueous media and the adsorption perspective. The review discusses the principles, mechanisms, and solution chemistry of antibiotics and how they affect remediation and the type of adsorbents used for antibiotic adsorption processes. The literature analysis revealed that: (i) Although antibiotics extraction and detection techniques have evolved from single-substrate-oriented to multi-substrates-oriented detection technologies, antibiotics pollution remains a great danger to the environment due to its trace level; (ii) Some of the most effective antibiotic remediation technologies are still at the laboratory scale. Thus, upscaling these technologies to field level will require funding, which brings in more constraints and doubts patterning to whether the technology will achieve the same performance as in the laboratory; and (iii) Adsorption technologies remain the most affordable for antibiotic remediation. However, the recent trends show more focus on developing high-end adsorbents which are expensive and sometimes less efficient compared to existing adsorbents. Thus, more research needs to focus on developing cheaper and less complex adsorbents from readily available raw materials. This review will be beneficial to stakeholders, researchers, and public health professionals for the efficient management of antibiotics for a refined decision.

Latest advances in layered covalent organic frameworks for water and wastewater treatment

This review provides an overview of recent progress in the development of layered covalent organic frameworks (LCOFs) for the adsorption and degradation of pollutants in water and wastewater treatment. LCOFs have unique properties such as high surface area, porosity, and tunability, which make them attractive adsorbents and catalysts for water and wastewater treatment. The review covers the different synthesis methods for LCOFs, including self-assembly, co-crystallization, template-directed synthesis, covalent organic polymerization (COP), and solvothermal synthesis. It also covers the structural and chemical characteristics of LCOFs, their adsorption and degradation capacity for different pollutants, and their comparison with other adsorbents and catalysts. Additionally, it discussed the mechanism of adsorption and degradation by LCOFs, the potential applications of LCOFs in water and wastewater treatment, case studies and pilot-scale experiments, challenges, and limitations of using LCOFs, and future research directions. The current state of research on LCOFs for water and wastewater treatment is promising, however, more research is needed to improve their performance and practicality. The review highlights that LCOFs have the potential to significantly improve the efficiency and effectiveness of current water and wastewater treatment methods and can also have implications for policy and practice.

Zinc (Ⅱ) functionalized magnetic geopolymer as sorbents for rapid extraction of Fluoroquinolones in food prior to quantification by UHPLC-MS/MS

A novel Zn@MGeo sorbent was easily constructed and can bind with FQs through the synergistic effect of electrostatic interaction and coordination. With the Zn@MGeo as sorbent, a MSPE-UHPLC-MS/MS method was established for simultaneous detection of FQs in complex matrices. The whole extraction process could be completed using 6.0 mg sorbent within 10 min under the optimal conditions. The established quantitative method obtained a wide linear range (0.01-200 μg/kg, R² > 0.9987), high sensitivity (LODs: 0.005-0.05 μg/kg) and negligible matrix effect. The method was applied for analysis of real samples, with recoveries between 75.6% and 103.7%. In addition, the sorbent could be reused at least 9 times without reducing the adsorption performance. In general, the established method not only proposes a novel sorbent for FQs extraction, but also provides a powerful tool for rapid and sensitive detection of FQs in food matrices with practical application value.

Preparation of covalent organic framework-based nanofibrous films with temperature-responsive release of thymol for active food packaging

Thymol (THY) is commonly used in active food packaging, however because of its high volatility, poor water solubility, and strong aromatic odor, the application of THY is facing challenges. Herein, covalent organic frameworks (COFs) were synthesized in room temperature by asymmetric monomer exchange method for THY encapsulation, and solution blow spinning was used to fabricate the THY@COF/polycaprolactone (PCL) nanofibrous films. The synthesized COFs had a large specific surface area, porous structure, and loading capacity of 30.35% for THY, and THY@COFs possessed good thermal stability. Characterization analysis showed that THY@COFs were successfully incorporated into the PCL films and increased the barrier property of the films. Besides, the films showed good biocompatibility and antibacterial activity. Moreover, THY@COF/PCL films exhibited temperature-responsive THY release profiles, which is important for practical preservation applications, especially for preserving food in warm environments. Overall, THY@COF/PCL films possess promising potential in active food packaging.

Leaf-like ionic covalent organic framework for the highly efficient and selective removal of non-steroidal anti-inflammatory drugs: Adsorption performance and mechanism insights

In recent years, ionic covalent organic frameworks (iCOFs) have become popular for the removal of contaminants from water. Herein, we employed 2-hydroxybenzene-1,3,5-tricarbaldehyde (TFP) and 1,3-diaminoguanidine monohydrochloride (Dg_Cl) to develop a novel leaf-like iCOF (TFP-Dg_Cl) for the highly efficient and selective removal of non-steroidal anti-inflammatory drugs (NSAIDs). The uniformly distributed adsorption sites, suitable pore sizes, and functional groups (hydroxyl groups, guanidinium groups, and aromatic groups) of the TFP-Dg_Cl endowed it with powerful and selective adsorption capacities for NSAIDs. Remarkably, the optimal leaf-like TFP-Dg_Cl demonstrated an excellent maximum adsorption capacity (1100.08 mg/g) for diclofenac sodium (DCF), to the best of our knowledge, the largest adsorption capacity ever achieved for DCF. Further testing under varying environmental conditions such as pH, different types of anions, and multi-component systems confirmed the practical suitability of the TFP-Dg_Cl. Moreover, the prepared TFP-Dg_Cl exhibited exceptional reusability and stability through six adsorption-desorption cycles. Finally, the adsorption mechanisms of NSAIDs on leaf-like TFP-Dg_Cl were confirmed as electrostatic interactions, hydrogen bonding, and π-π interactions. This work significantly supplements to our understanding of iCOFs and provides new insights into the removal of NSAIDs from wastewater.

Donnan Effect-Engineered Covalent Organic Framework Membranes toward Size- and Charge-Based Precise Molecular Sieving

Covalent organic frameworks (COFs), with ordered pores and well-defined topology, are ideal materials for nanofiltration (NF) membranes because of their capacity of transcending the permeance/selectivity trade-off predicament. However, most reported COF-based membranes are focused on separating molecules with different sizes, resulting in low selectivity to similar molecules with different charges. Here, the negatively charged COF layer was fabricated in situ on a microporous support for the separation of molecules with different sizes and charges. Ultrahigh water permeance (216.56 L m^-2 h^-1 bar^-1) was obtained because of the ordered pores and excellent hydrophilicity, which exceeds that of most membranes with similar rejections. For the first time, we used multifarious dyes with different sizes and charges, for the investigation of the selectivity behavior caused by the Donnan effect and size exclusion. The obtained membranes represent superior rejections to negatively and neutrally charged dyes larger than 1.3 nm, while positively charged dyes with a size of 1.6 nm can pass through the membrane, resulting in the separation of negative/positive mixed dyes with similar molecular sizes. This strategy of combining the Donnan effect and size exclusion in nanoporous materials may evolve into a generic platform for sophisticated separation.

Multi-color fluorescence sensing platform for visual determination of norfloxacin based on a terbium (Ш) functionalized covalent organic framework

Sensitive and visual determination of fluoroquinolone antibiotics (FQs) is of great significance since their abuse and inappropriate handling can be problematic. Herein, we propose a lanthanide covalent organic framework fluorescence sensing system (Tb@COF-Ru) with visualization capability to determine the FQs level, where Tb@COF was employed as the sensing probe, while the red-emitting Ru(bpy)₃²⁺ serves as a constant red fluorescent background. With increasing norfloxacin concentration, the green fluorescence of Tb³⁺ is gradually enhanced, finally realizing the multicolor fluorescence change from red to green. With a smartphone for RGB analysis, visual monitoring and quantitative analysis were realized without any sophisticated instrument. Limits of detection for the fluorescence quantitative and visual mode for norfloxacin were 0.33 nM and 7.3 μM, respectively. This method was rapid (1 min) and visualized, providing a simple analysis of various food matrices (honey, milk, egg and beef) and water samples for trace FQs.

Defective SO3H-MIL-101(Cr) for capturing different cationic metal ions: Performances and mechanisms

For broad-spectrum adsorption and capture toward cationic metal ions, a facile strategy was adopted to fabricate defective SO₃H-MIL-101(Cr) (SS-SO₃H-MIL-101(Cr)-X, X = 2, 3, 4) with enhanced vacancies using seignette salt (SS) as the modulating agent. The boosted adsorption performances of SS-SO₃H-MIL-101(Cr)-X toward eight different ions, including Ag⁺, Cs⁺, Pb²⁺, Cd²⁺, Ba²⁺, Sr²⁺, Eu³⁺ and La³⁺ in both individual component and mixed component systems, could be ascribed to the effective mass transfer resulting from the exposure of defective sites. Especially, the optimal SS-SO₃H-MIL-101(Cr)-3 could remove all the selected metal cations to below the permissible limits required by the World Health Organization (WHO) in the continuous-flow water treatment system. Furthermore, SS-SO₃H-MIL-101(Cr)-3 exhibited good adsorption capacity (189.6 mg·g^-1) toward Pb²⁺ under neutral condition and excellent desorption recirculation performance (removal efficiency > 95% after 5 cycles). Moreover, the adsorption mechanism involved the electrostatic adsorption and coordinative interactions resulting from complexation between the adsorption active sites and targeted cations (like Cr-O-M and S-O-M), which were explored systematically via both X-ray photoelectron spectroscopy (XPS) determination and density functional theory (DFT) calculations. Overall, this work provided guidance for modulating SS-SO₃H-MIL-101(Cr)-X to promote its potential application in widespread metal cations removal from wastewater.

New insight into enhanced transport of multi-component porous covalent-organic polymers with alkyl chains as injection agents for levofloxacin removal in saturated sand columns

Levofloxacin (LEV) is prone to be retained in aquifers due to its strong adsorption affinity onto sand, thus posing a threat to groundwater quality. In-situ injection technology for remediating LEV-contaminated soil and groundwater is still challenging owing to the lack of appropriate remedial agents. Herein, two novel multi-component porous covalent-organic polymers (namely, SLEL-1 and SLEL-2) with alkyl chains were constructed through Schiff-base reactions to adsorb LEV from an aqueous solution, in which the kinetics, isotherms, influenced factors were investigated. Plausible adsorption mechanisms were proposed through characterization and experimental analysis, including pore filling effect, π-π electron-donor-acceptor (EDA) interaction, hydrogen bonding force, hydrophobic-hydrophobic interaction as well as electrostatic force. In addition, response surface methodology (RSM) revealed the treatment optimization and reciprocal relationship within multi-variables. Furthermore, taking advantage of favorable dispersion and outstanding competitive behavior, SLEL-1 was established as an in-situ adsorptive agent in dynamic saturated columns on a laboratory scale to investigate the removal of LEV from water-bearing stratum. Overall, the findings of this work provided an insight into the fabrication of SLELs as long-term mobile and reusable adsorptive agents for practical in-situ applications in the future.

Facile synthesis of triazine-based microporous organic network for high-efficient adsorption of flumequine and nadifloxacin: A comprehensive study on adsorption mechanisms and practical application potentials

Flumequine (FLU) and nadifloxacin (NAD), as emerging contaminants, have received extensive attention recently. In this study, a triazine-based microporous organic network (TMON) was synthetized and developed as an excellent adsorbent for FLU and NAD. The adsorption behavior and influence factors were investigated in both single and binary systems. Insight into the adsorption mechanisms were conducted through experiments, models, and computational studies, from macro and micro perspectives including functional groups, adsorption sites, adsorption energy and frontier molecular orbital. The results showed that the maximum adsorption capacities of TMON for FLU and NAD are 325.27 and 302.28 mg/g under 30 °C higher than records reported before. TMON exhibits the better adaptability and anti-interference ability for influence factors, leading to the preferable application effect in kinds of real water samples. TMON also shows the application potentials for the adsorption of other quinolone antibiotics and CO₂ capture. Hydrogen-bonding interaction played the most critical role compared to π-π stacking effect, π-π electron-donor-acceptor interaction, CH-π interaction, and hydrophobic interaction during the adsorption. TMON could be regarded as a promising environmental adsorbent for its large surface area, stable physical and chemical properties, excellent recyclability, and wide range of applications.

Selective cationic covalent organic framework for high throughput rapid extraction of novel polyfluoroalkyl substances

Novel per- and polyfluoroalkyl substances (PFASs) raise global concerns due to their toxic effects on environment and human health. However, researches on analytical methods of novel PFASs are lacking. Here, a kind of selective cationic covalent organic framework (iCOF) was designed and loaded on the surface of cotton as an adsorbent. Then, a simple solid-phase extraction (SPE) method based on the cotton@iCOF was developed for high throughput rapid extraction of six novel PFASs in water samples, coupled with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) determination. Several important SPE parameters, such as the amount of iCOF, sample pH, desorption conditions and salinity were systematically investigated. Under optimal conditions, the limits of detection and quantification of this SPE-UHPLC-MS/MS method were as low as 0.08-2.14 ng/L and 0.28-7.15 ng/L, respectively. The recoveries were 77.9-117.6 % for the tap water and surface water, and F-53 B in surface water were detected. Notably, this SPE process was rapid (1 h for 500 mL water sample) compared with commercial SPE (normal 2-3 h), owing to little resistance of cotton@iCOF and omission of nitrogen blowing process, and high throughput with 12 samples concurrently extracted. Additionally, various characterization means and density functional theory (DFT) calculations showed that ion-exchange effect, hydrophobic interaction, hydrogen bonding and ordered channel structure synergistically contributed to the PFASs adsorption on cotton@iCOF. The cotton@iCOF-based SPE method with simplicity, rapidity, selectivity and efficiency provided new research ideas for the analysis and control of ionic emerging pollutants in water.

Adsorption behaviors of three antibiotics in single and co-existing aqueous solutions using mesoporous carbon

The residual antibiotics detected frequently in aquatic environment may pose a potential threat to human health and ecosystem. Exploring a possible way to remove them from antibiotic polluted-water is a key problem demanding prompt solution. To investigate their adsorption characteristics, three antibiotics including tetracycline (TC), ciprofloxacin (CIP), and sulfadiazine (SDZ) have been removed using sucrose-based mesoporous carbon (SMC) in single and co-existing systems. Characterization revealed that the SMC had a high Brunauer-Emmett-Teller (BET) surface area (1215.48 m²/g), large mesoporous pore size (6.36 nm), and abundant oxygen-containing functional groups, which might offer sufficient adsorption sites for antibiotics. The process of antibiotics adsorption was described well using pseudo-second-order model. The rate constant K₂ at various temperatures followed the order 308 K > 298 K > 288 K. This finding suggesting the increase in temperature could promote the removal of antibiotics. The maximum adsorption capacities for TC (232.10 mg/g), CIP (257.30 mg/g), and SDZ (204.28 mg/g) of SMC were obtained using Langmuir isotherm (pH = 4-6, T = 308K, SMC dosage = 10 mg, C₀ = 30-40 mg/L). These data implied SMC had the excellent adsorptive property and affinity to antibiotics. In binary systems, SMC offers efficient removal percentages (>90%) for each of the target antibiotic. While the removal efficiencies of TC, CIP, and SDZ by SMC in the ternary system were 90.40, 72.99, and 80.46%, respectively. These results suggested the competition on active sites of SMC happened among the three antibiotics. The affinities of SMC to three antibiotics followed the order TC > SDZ > CIP. The removal of antibiotics by SMC were mainly attributed to the mechanisms including electrostatic interactions, hydrophobic interactions, hydrogen bonding and so on. This study will provide a technical support for antibiotic wastewater treatment.

Structure, mechanism, and toxicity in antibiotics metal complexation: Recent advances and perspectives

Antibiotic-metal complexes (AMCs) formed by antibiotics and metal ions have attracted considerable attentions in recent years. Although different removal methods for AMCs have been reported in the literature, very few investigations have focused on the mechanisms and toxic effects of antibiotic-metal coordination. This review briefly describes the structural characteristics of various commonly used antibiotics and the coordination mechanisms with metal ions. Considering the complexity of the real environment, various environmental factors affecting AMC formation are highlighted. The effects of AMCs on microbial community structure and the role of metal ions in influencing resistant genes from the molecular perspective are of interest within this work. The toxicities and mechanisms of AMCs on different species of biota are also discussed. These findings underline the need for more targeted detection and analysis methods and more suitable toxicity markers to verify the combination of antibiotics with metal ions and reveal environmental toxicities in future. This review presents an innovative idea that antibiotics combined with metal ions will change the toxicity and environmental behavior of antibiotics.

Effect of Covalent Organic Frameworks Containing Different Groups on Properties of Sulfonated Poly(ether ether ketone) Matrix Proton Exchange Membranes

The rich -SO₃H groups enable sulfonated poly (ether ether ketone) (SPEEK) to possess excellent proton conductivities in proton exchange membrane (PEM), but cause excessive water absorption, resulting in the decline of dimensional stability. It is a challenge to resolve the conflict between conductivity and stability. Owing to its unique structural designability, covalent organic frameworks (COFs) have been used to regulate the performances of PEMs. The authors propose the use of COFs with acidic and basic groups for meeting the requirements of proton conductivity and dimensional stability. Herein, COFs containing different groups (sulfoacid, pyridine, and both) were uniformly dispersed into the SPEEK matrix by in situ synthesis, and the effects on the properties of SPEEK matrix PEMs were revealed. The sulfoacid group significantly improves proton conductivities. At 60 °C, under 95% RH, the conductivity of the SPEEK/TpPa-SO₃H-20 composite membrane was 443.6 mS·cm^-1, which was 3.3 times that of the pristine SPEEK membrane. The pyridine group reduced the swelling ratio at 50 °C from 220.7% to 2.4%, indicating an enhancement in dimensional stability. Combining the benefits of sulfoacid and pyridine groups, SPEEK/TpPa-(SO₃H-Py) composite membrane has a conductivity of 360.3 mS·cm^-1 at 60 °C and 95% RH, which is 1.86 times that of SPEEK, and its swelling ratio is 11.8%, about 1/20 of that of SPEEK membrane. The method of in situ combination and regulation of groups open up a way for the development of SPEEK/COFs composite PEMs.

Histostar-Functionalized Covalent Organic Framework for Electrochemical Detection of Exosomes

Covalent organic frameworks (COFs) are gaining growing interest owing to their various structures and versatility. Since their specific physical–chemical characteristics endow them great usage potentiality in biosensing, we herein have synthesized spherical COFs with regular shape and good dispersion, which are further used for the design of a novel nanoprobe by modifying Histostar on the surface of the COFs. Moreover, we have applied a nanoprobe for the fabrication of an electrochemical biosensor to detect exosomes. Since Histostar is a special polymer, conjugated with many secondary antibodies (IgG), and HRP can increase the availability of HRP at the antigenic site, the biosensor can have a strong signal amplification ability. Meanwhile, since COFs with high porosity can be loaded with a huge amount of Histostar, the sensitivity of the biosensor can be further improved. With such a design, the proposed biosensor can achieve a low exosomes detection limit of 318 particles/µL, and a wide linear detection range from 10³ particles/µL to 10⁸ particles/µL. So, this work may offer a promising platform for the ultrasensitive detection of exosomes.

Effective extraction of fluoroquinolones from water using facile modified plant fibers

In this study, ecofriendly and economic carboxy-terminated plant fibers (PFs) were used as adsorbents for the effective in-syringe solid phase extraction (IS-SPE) of fluoroquinolone (FQ) residues from water. Based on the thermal esterification and etherification reaction of cellulose hydroxy with citric acid (CA) and sodium chloroacetate in aqueous solutions, carboxy groups grafted onto cotton, cattail, and corncob fibers were fabricated. Compared with carboxy-terminated corncob and cotton, CA-modified cattail with more carboxy groups showed excellent adsorption capacity for FQs. The modified cattail fibers were reproducible and reusable with relative standard deviations of 3.2%–4.2% within 10 cycles of adsorption-desorption. A good extraction efficiency of 71.3%–80.9% was achieved after optimizing the extraction condition. Based on carboxylated cattail, IS-SPE coupled with ultra-performance liquid chromatography with a photodiode array detector was conducted to analyze FQs in environmental water samples. High sensitivity with limit of detections of 0.08–0.25 μg/L and good accuracy with recoveries of 83.8%–111.7% were obtained. Overall, the simple and environment-friendly modified waste PFs have potential applications in the effective extraction and detection of FQs in natural waters.

•

Plant fibers were functionalized by green methods.

•

The bio-adsorbents were applied for the extraction of fluoroquinolones.

•

The higher carboxy content in fibers improved extraction performance.

•

Carboxylated cattail was efficient in the adsorption of fluoroquinolones in environmental waters.

A comprehensive review on recent advances toward sequestration of levofloxacin antibiotic from wastewater

Among various classes of antibiotics, fluoroquinolones, especially Levofloxacin, are being administered on a large scale for numerous purposes. Being highly stable to be completely metabolized, residual quantities of Levofloxacin get accumulated into the food chain proving a great global threat for aquatic as well as terrestrial ecosystems. Various removal techniques including both conventional and advanced methods have been reported for this purpose. This review is a novel attempt to make a critical analysis of the recent advances made exclusively toward the sequestration of Levofloxacin from wastewater through an extensive literature survey (2015-2021). Adsorption and advanced oxidation processes especially photocatalytic degradation are the most tested techniques in which assorted nanomaterials play a significant role. Several photocatalysts exhibited up to 100% degradation of LEV which makes photocatalytic degradation the best method among other tested methods. However, the degraded products need to be further monitored in terms of their toxicity. Biological degradation may prove to be the most environment-friendly with the least toxicity, unfortunately, not much research is reported in the field. With these key findings and knowledge gaps, authors suggest the scope of hybrid techniques, which have been experimented on other antibiotics. These can potentially minimize the disadvantages of the individual techniques concurrently improving the efficiency of LEV removal. Besides, techniques like column adsorption, membrane treatment, and ozonation, being least reported, reserve good perspectives for future research. With these implications, the review will certainly serve as a breakthrough for researchers working in this field to aid their future findings.

Fabrication of environmentally-friendly composited sponges for efficient removal of fluoroquinolones antibiotics from water

In this study, two environmentally-friendly macroscopically formal (PVF) composited sponges (PL and PLS) functionalized with lignin and lignosulfonate, respectively, were fabricated by a one-step mechanical foaming method. PLS, obtained with the fed mass ratio of 0.3:1 lignosulfonate to PVF in the preparation process, possessed a large specific surface area of approximately 22.396 m²/g, a three-dimensional skeleton structure with a skeletal density of 3.236 g/cm³, and 0.338 mmol/g of acidic oxygen-containing groups. Thus, it showed a high adsorption capacity of 0.16-0.24 mmol/g in removing seven antibiotics, of the popular fluoroquinolones (FQs) family from water. The contributions of hydrogen bonding, electrostatic attraction (EA) and π-π electron donor-acceptor interaction to the adsorption of FQs onto the PL and PLS sponges were analyzed systematically by investigating the pH dependence of the adsorption capacity, and the changes in adsorption of two sub structural analogs of FQs as molecular probes, and by performing theoretical calculations. The EA between the acidic oxygen-containing groups on the sponges and the amino groups of FQs played a dominant role in adsorption in near neutral conditions, leading to a superior adsorption performance for PLS. Overall, the composited sponges have the advantages of simple production, environmental-friendliness, convenient recycle, and low cost, which renders them potentially viable in treating real wastewater containing FQs.

Accurate Removal of Toxic Organic Pollutants from Complex Water Matrices

Characteristic emerging pollutants at low concentration have raised much attention for causing a bottleneck in water remediation, especially in complex water matrices where high concentration of interferents coexist. In the future, tailored treatment methods are therefore of increasing significance for accurate removal of target pollutants in different water matrices. This critical review focuses on the overall strategies for accurately removing highly toxic emerging pollutants in the presence of typical interferents. The main difficulties hindering the improvement of selectivity in complex matrices are analyzed, implying that it is difficult to adopt a universal approach for multiple targets and water substrates. Selective methods based on assorted principles are proposed aiming to improve the anti-interference ability. Thus, typical approaches and fundamentals to achieve selectivity are subsequently summarized including their mechanism, superiority and inferior position, application scope, improvement method and the bottlenecks. The results show that different methods may be applicable to certain conditions and target pollutants. To better understand the mechanism of each selective method and further select the appropriate method, advanced methods for qualitative and quantitative characterization of selectivity are presented. The processes of adsorption, interaction, electron transfer, and bond breaking are discussed. Some comparable selective quantitative methods are helpful for promoting the development of related fields. The research framework of selectivity removal and its fundamentals are established. Presently, although continuous advances and remarkable achievements have been attained in the selective removal of characteristic organic pollutants, there are still various substantial challenges and opportunities. It is hopeful to inspire the researches on the new generation of water and wastewater treatment technology, which can selectively and preferentially treat characteristic pollutants, and establish a reliable research framework to lead the direction of environmental science.

Post-synthetic modifications in porous organic polymers for biomedical and related applications

Porous organic polymers (POPs) are prepared by crosslinked polymerization of multidimensional rigid aromatic building blocks. Generally, POPs can be classified into crystalline covalent organic frameworks (COFs) and other poorly crystalline or amorphous porous polymers. Due to their remarkable intrinsic properties, such as high porosity, stability, tunability, and presence of numerous building blocks, several new POPs are being developed for application across various scientific fields. The essential sensitive functional groups needed for specific applications are not sustained under harsh POP preparation conditions. The recently developed post-synthetic modification (PSM) strategies for POPs have enabled their advanced applications that are otherwise restricted. Owing to the advanced PSM strategies POPs have experienced a blossoming resurgence with diverse functions, particularly in biomedical applications, such as bioimaging tools, drugs, enzymes, gene or protein delivery systems, phototherapy, and cancer therapy. This tutorial review focuses on the recently developed PSM strategies for POPs, especially for biomedical applications, and their future perspectives as promising bioapplicable materials.

Molecular design of high-efficacy and high drug safety Fluoroquinolones suitable for a variety of aerobic biodegradation bacteria

The present study attempted to improve the biodegradation removal rate of Fluoroquinolones (FQs) in sewage treatment plants. The similarity index analysis (CoMSIA) model for combined biodegradability was constructed, and 33 kinds of molecular derivatives of FQs suitable for a variety of aerobic biodegradation microorganisms were designed. Further, derivative-20 and derivative-28, with high drug efficiency, drug safety, and environmental friendliness were selected through pharmacokinetics (ADMET), toxicokinetics (TOPKAT), FQs functional characteristics, and environmental friendliness evaluations. Compared with the target molecules, the combined biodegradability of the above two FQ-derivative molecules were increased by 193.57 % and 205.07 %, respectively, while their environment-friendly characteristics were improved to a certain degree. Through molecular docking and molecular dynamic simulation analysis, it showed that van der Waals force (decreased by 2.73 %-61.74 %) was the main factor influencing the binding ability of the modified FQ molecules to the receptor proteins. In addition, the relationship among the non-bonding interaction resultant force, the binding effect of the FQ-derivative molecules, and the receptor protein-related amino acid residues were studied for the first time. It was observed that the higher the value of the non-bonding interaction resultant force, the better was the binding effect, which demonstrating the significantly improved biodegradability of the designed FQ-derivative molecules.

Ionic Covalent Organic Frameworks for Energy Devices

Covalent organic frameworks (COFs) are a class of porous crystalline materials whose facile preparation, functionality, and modularity have led to their becoming powerful platforms for the development of molecular devices in many fields of (bio)engineering, such as energy storage, environmental remediation, drug delivery, and catalysis. In particular, ionic COFs (iCOFs) are highly useful for constructing energy devices, as their ionic functional groups can transport ions efficiently, and the nonlabile and highly ordered all-covalent pore structures of their backbones provide ideal pathways for long-term ionic transport under harsh electrochemical conditions. Here, current research progress on the use of iCOFs for energy devices, specifically lithium-based batteries and fuel cells, is reviewed in terms of iCOF backbone-design strategies, synthetic approaches, properties, engineering techniques, and applications. iCOFs are categorized as anionic COFs or cationic COFs, and how each of these types of iCOFs transport lithium ions, protons, or hydroxides is illustrated. Finally, the current challenges to and future opportunities for the utilization of iCOFs in energy devices are described. This review will therefore serve as a useful reference on state-of-the-art iCOF design and application strategies focusing on energy devices.

Highly Crystalline Covalent Organic Frameworks Act as a Dual-Functional Fluorescent-Sensing Platform for Myricetin and Water, and Adsorbents for Myricetin

Selective detection of active ingredients in complex samples has always been a crucial challenge because there are many disturbing compounds, especially structural analogues that interfere with the detection. In this work, a fluorescent covalent organic framework (named COF-TD), which can be used for the selective fluorescence detection and enrichment of myricetin from complex samples, was reported for the first time. The highly crystalline COF-TD with bright blue fluorescence was formed through a solution polymerization method by the condensation reaction between 4,4',4″-(1,3,5-triazine-2,4,6-triyl)trianiline and 2,5-dihydroxy-1,4-benzenedicarboxaldehyde. Due to spatial size selectivity, multisites hydrogen bonding, and π-π interaction, myricetin can quench the fluorescence of COF-TD with an inner filter effect (IFE) and static quenching mechanisms as well as can be enriched on COF-TD. Myricetin can observably eliminate the interference of other compounds and selectively quench the fluorescence of COF-TD with a limit of detection (LOD) of 0.30 μg·mL^-1. The high adsorption ability of COF-TD (Q = 124.6 mg·g^-1) to myricetin was also obtained. Finally, a sensing platform based on COF-TD for myricetin was successfully developed and applied for the detection of myricetin from vine teas. In addition, COF-TD also showed good water sensing ability and could be used effectively to detect water content in organic solvent (1-18% water in acetone, 0.5-5% water in acetonitrile, 1-4.5% water in ethyl acetate, v/v). To the best of our knowledge, this is the first report where COF-TD was used to detect water in a relatively wide concentration range. In all, this work provided dual-functional fluorescent COFs with the properties of an adsorbent, opening up new methodologies for the simple, selective, and enrichment detection method for myricetin.