Facile construction of 2D g-C3N4 supported nanoflower-like NaBiO3 with direct Z-scheme heterojunctions and insight into its photocatalytic degradation of tetracycline

Degradation of tetracycline under a wide pH range in a heterogeneous photo bio-electro-fenton system using FeMn-LDH/g-C3N4 cathode: Performance and mechanism

The widespread use of antibiotics and the inefficiency of traditional degradation treatments pose threats to the environment and human health. Previous studies have reported the potential of bio-electro-Fenton (BEF) processes for antibiotic removal. However, some drawbacks, such as a strict pH range of 2-3 and iron sludge generation, limit their large-scale application. Thus, to overcome the narrow pH range of traditional BEF processes, a photo-BEF (PBEF) system was established using a novel FeMn-layered double hydroxide (LDH)/graphitic carbon nitride (g-C3N4) (FM/CN) composite cathode. The performance of the PBEF system was investigated by degrading tetracycline (TC) under low-power LED lamp irradiation. The results indicated that the pH range of the PBEF system could be expanded to 3-11 using an FM/CN cathode, which exhibited a TC removal efficiency of 63.0%-75.9%. The highest TC removal efficiency was achieved at pH 7. The efficient mineralization of TC by the PBEF system can be high, up to 67.6%. In addition, the TC removal mechanism was discussed in terms of reactive oxygen species, TC degradation intermediate analyses, and density functional theory (DFT) calculations. Strong oxidative hydroxyl radicals (·OH) were the dominant reactive oxidizing species in the PBEF system, followed by ·O2- and h+. Three pathways of TC degradation were proposed based on the analysis of intermediates, and the reactive sites attacked by electrophilic reagents were explored using DFT modeling. In addition, the overall toxicity of TC degradation intermediates effectively decreased in the PBEF system. This work offers deep insights into the TC removal mechanisms and performance of the PBEF system over a wide pH range of 3-11.

Nanotechnology-assisted treatment of pharmaceuticals contaminated water

The presence of pharmaceutical compounds in wastewater due to an increase in industrialization and urbanization is a serious health concern. The demand for diverse types of pharmaceutical compounds is expected to grow as there is continuous improvement in the global human health standards. Discharge of domestic pharmaceutical personal care products and hospital waste has aggravated the burden on wastewater management. Further, the pharmaceutical water is toxic not only to the aquatic organism but also to terrestrial animals coming in contact directly or indirectly. The pharmaceutical wastes can be removed by adsorption and/or degradation approach. Nanoparticles (NPs), such as 2D layers materials, metal-organic frameworks (MOFs), and carbonaceous nanomaterials are proven to be more efficient for adsorption and/or degradation of pharmaceutical waste. In addition, inclusion of NPs to form various composites leads to improvement in the waste treatment efficacy to a greater extent. Overall, carbonaceous nanocomposites have advantage in the form of being produced from renewable resources and the nanocomposite material is biodegradable either completely or to a great extent. A comprehensive literature survey on the recent advancement of pharmaceutical wastewater is the focus of the present article.

Highly Efficient Photo-Fenton Ag/Fe2O3/BiOI Z-Scheme Heterojunction for the Promoted Degradation of Tetracycline

Novel Ag/Fe₂O₃/BiOI Z-scheme heterostructures are first fabricated through a facile hydrothermal method. The composition and properties of as-synthesized Ag/Fe₂O₃/BiOI nanocomposites are characterized by powder X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, UV-Vis diffuse reflectance spectra, etc. The Ag/Fe₂O₃/BiOI systems exhibit remarkable degradation performance for tetracycline (TC). In particular, the composite (Ag/Fe₂O₃/BiOI-2) shows the highest efficiency when the contents of Ag and α-Fe₂O₃ are 2 wt% and 15%, respectively. The effects of operating parameters, including the solution pH, H₂O₂ concentration, TC concentration, and catalyst concentration, on the degradation efficiency are investigated. The photo-Fenton mechanism is studied, and the results indicated that •O^2- is the main active specie for TC degradation. The enhanced performance of Ag/Fe₂O₃/BiOI heterostructures may be ascribed to the synergic effect between photocatalysis and the Fenton reaction. The formation of Ag/Fe₂O₃/BiOI heterojunction is beneficial to the transfer and separation of charge carriers. The photo-generated electrons accelerate the Fe²⁺/Fe³⁺ cycle and create the reductive reaction of H₂O₂. This research reveals that the Ag/Fe₂O₃/BiOI composite possesses great potential in wastewater treatment.

Self-Assembly of Bi2Sn2O7/β-Bi2O3 S-Scheme Heterostructures for Efficient Visible-Light-Driven Photocatalytic Degradation of Tetracycline

Fabrication of S-scheme heterojunctions with enhanced redox capability offers an effective approach to address environmental remediation. In this study, high-performance Bi₂Sn₂O₇/β-Bi₂O₃ S-scheme heterojunction photocatalysts were fabricated via the in situ growth of Bi₂Sn₂O₇ on β-Bi₂O₃ microspheres. The optimized Bi₂Sn₂O₇/β-Bi₂O₃ (BSO/BO-0.4) degradation efficiency for tetracycline hydrochloride was 95.5%, which was 2.68-fold higher than that of β-Bi₂O₃. This improvement originated from higher photoelectron-hole pair separation efficiency, more exposed active sites, excellent redox capacity, and efficient generation of ^·O₂ ^- and ^·OH. Additionally, Bi₂Sn₂O₇/β-Bi₂O₃ exhibited good stability against photocatalytic degradation, and the degradation efficiency remained >89.7% after five cycles. The photocatalytic mechanism of Bi₂Sn₂O₇/β-Bi₂O₃ S-scheme heterojunctions was elucidated. In this study, we design and fabricate high-performance heterojunction photocatalysts for environmental remediation using S-scheme photocatalysts.

A Z-scheme BiYO3/g-C3N4 heterojunction photocatalyst for the degradation of organic pollutants under visible light irradiation

Photocatalysis is one of the fascinating fields for the wastewater treatment. In this regard, the present study deals with an effective visible light active BiYO₃/g-C₃N₄ heterojunction nanocomposite photocatalyst with various ratios of BiYO₃ and g-C₃N₄ (1:3, 1:1 and 3:1), synthesised by a wet chemical approach. The as-synthesised nanocomposite photocatalysts were investigated via different physicochemical approaches like Fourier transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electrons microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), photoluminescence (PL) and photoelectrochemical studies to characterise the crystal structure, morphology, optical absorption characteristics and photoelectrochemical properties. The photocatalytic degradation ability of the prepared photocatalytic samples was also analysed through the degradation of RhB in the presence of visible light irradiation. Of all the synthesised photocatalysts, the optimised CB-1 composite showed a significant photocatalytic efficiency (88.7%), with excellent stability and recyclability after three cycles. O₂^•- and ^•OH radicals were found to act a major role in the RhB degradation using optimised CB-1 composite, and it possessed ~ 1 times greater photocurrent intensity than the pristine g-C₃N₄ and BiYO₃. In the present work, a direct Z-scheme heterojunction BiYO₃/g-C₃N₄ with a considerably improved photocatalytic performance is reported.

3D chrysanthemum-like g-C3N4/TiO2 as an efficient visible-light-driven Z-scheme hybrid photocatalyst for tetracycline degradation

Utilization of a solar-driven semiconductor as a photocatalyst to degrade antibiotic pollutants is a feasible and environmentally friendly technology. In this paper, 3D chrysanthemum-like g-C₃N₄/TiO₂ as a visible-light-driven hybrid photocatalyst with a Z-scheme heterostructure was firstly synthesized by the in situ hydrothermal synthesis method. Experiments proved that this 3D chrysanthemum-like g-C₃N₄/TiO₂ had better degradation performance toward tetracycline than TiO₂ and g-C₃N₄. In particular, when optimized g-C₃N₄/TiO₂-2 was applied for tetracycline removal (200 ml, 10 mg L^-1), the corresponding degradation efficiency could reach nearly 100% within 60 min. The improved photocatalytic activity was the result of better utilization of the heterostructure-induced visible light, more efficient charge transfer in the Z-scheme heterojunction as well as stronger redox capability. The Z-scheme degradation mechanism was supported by the trapping experiments of active species and ESR radical detection, and the whole photocatalytic process was controlled by the combined action of ˙O₂^-, h⁺ and ˙OH radicals. This study may be beneficial for the design of more efficient sunlight-driven hybrid photocatalysts and their applications in wastewater treatment.

Removal of tetracycline from wastewater using g-C3N4 based photocatalysts: A review

Tetracycline is currently one of the most consumed antibiotics for human therapy, veterinary purpose, and agricultural activities. Tetracycline worldwide consumption is expected to rise by about more than 30% by 2030. The persistence of tetracycline has necessitated implementing and adopting strategies to protect aquatic systems and the environment from noxious pollutants. Here, graphitic carbon nitride-based photocatalytic technology is considered because of higher visible light photocatalytic activity, low cost, and non-toxicity. Thus, this review highlights the recent progress in the photocatalytic degradation of tetracycline using g-C₃N₄-based photocatalysts. Additionally, properties, worldwide consumption, occurrence, and environmental impacts of tetracycline are comprehensively addressed. Studies proved the occurrence of tetracycline in all water matrices across the world with a maximum concentration of 54 μg/L. Among different g-C₃N₄-based materials, heterojunctions exhibited the maximum photocatalytic degradation of 100% with the reusability of 5 cycles. The photocatalytic membranes are found to be feasible due to easiness in recovery and better reusability. Limitations of g-C₃N₄-based wastewater treatment technology and efficient solutions are also emphasized in detail.

Catalytic Activation of Hydrogen Peroxide Using Highly Porous Hydrothermally Modified Manganese Catalysts for Removal of Azithromycin Antibiotic from Aqueous Solution

Hydrogen peroxide catalytic activation holds great promise in the treatment of persistent pollutants. In this study, the novel Mn-Acacair/Al, Mn-Acacarg/Al and Mn-BTCarg/Al catalysts, supported on Al2O3, were applied for rapid hydrogen peroxide activation and azithromycin antibiotic removal. The catalysts were prepared by the calcination-hydrothermal method under air or argon atmosphere. The characterization confirmed that the modification of manganese with acetylacetonate and benzene-1,3,5-tricarboxylic acid (H3BTC) O-donor ligands highly improves the catalyst porosity, amorphousity, and abundance of coordinately unsaturated sites, which facilitate the generation of reactive oxygen species. The hydrogen peroxide activation and azithromycin removal reached 98.4% and 99.3% after 40 min using the Mn-BTCarg/Al catalyst with incredible stability and reusability. Only a 5.2% decrease in activity and less than 2% manganese releasing in solutions were detected after five regeneration cycles under the optimum operating conditions. The removal intermediates were identified by LC-MS/MS analysis, and the pathways were proposed. The hydroxylation and decarboxylation reactions play a key role in the degradation reaction.

g-C3N4-Based Direct Z-Scheme Photocatalysts for Environmental Applications

Photocatalysis represents a promising technology that might alleviate the current environmental crisis. One of the most representative photocatalysts is graphitic carbon nitride (g-C3N4) due to its stability, cost-effectiveness, facile synthesis procedure, and absorption properties in visible light. Nevertheless, pristine g-C3N4 still exhibits low photoactivity due to the rapid recombination of photo-induced electron-hole (e−-h+) pairs. To solve this drawback, Z-scheme photocatalysts based on g-C3N4 are superior alternatives since these systems present the same band configuration but follow a different charge carrier recombination mechanism. To contextualize the topic, the main drawbacks of using g-C3N4 as a photocatalyst in environmental applications are mentioned in this review. Then, the basic concepts of the Z-scheme and the synthesis and characterization of the Z-scheme based on g-C3N4 are addressed to obtain novel systems with suitable photocatalytic activity in environmental applications (pollutant abatement, H2 production, and CO2 reduction). Focusing on the applications of the Z-scheme based on g-C3N4, the most representative examples of these systems are referred to, analyzed, and commented on in the main text. To conclude this review, an outlook of the future challenges and prospects of g-C3N4-based Z-scheme photocatalysts is addressed.

Integrated p-n/Schottky junctions for efficient photocatalytic hydrogen evolution upon Cu@TiO2-Cu2O ternary hybrids with steering charge transfer

Solar-driven photocatalytic H₂ evolution could tackle the issue of fossil fuels-triggered greenhouse gas emission with sustainable clean energy. However, splitting water into hydrogen with high performance by a single semiconductor is challenging because of the poor charge separation efficiency. Herein, a novel ternary Cu@TiO₂-Cu₂O hybrid photocatalyst with multiple charge transfer channels has been designed for efficient solar-to-hydrogen evolution. Indeed, the ternary Cu@TiO₂-Cu₂O hybrid by coupling Cu@TiO₂ with Cu₂O nanoparticles shows highly-efficient photocatalytic hydrogen generation with rate of 12000.6 μmol·g^-1·h^-1, which is 4.4, 2.1, and 1.9 times higher than the pure TiO₂ (2728.8 μmol·g^-1·h^-1), binary Cu@TiO₂ (5595.5 μmol·g^-1·h^-1), and TiO₂-Cu₂O (6076.8 μmol·g^-1·h^-1) composite, respectively. In such a Cu@TiO₂-Cu₂O hybrid, the formed internal electric field in the TiO₂-Cu₂O p-n junction allows the electrons in Cu₂O to migrate to TiO₂, while the electrons in the CB of TiO₂ could flow into Cu via the Schottky junction at the Cu@TiO₂ interface. In this regard, a multiple charge transfer is achieved between the Cu@TiO₂ and Cu₂O, which facilitates promoted charge separation and results in the construction of electron-accumulated center (Cu) and hole-enriched surface (Cu₂O). This p-n/Schottky junctions with steered charge transfer assists the hydrogen production upon the Cu@TiO₂-Cu₂O ternary photocatalyst.

Visible-light-driven photocatalytic degradation of dye and antibiotics by activated biochar composited with K+ doped g-C3N4: Effects, mechanisms, actual wastewater treatment and disinfection

To improve the performance of graphitic carbon nitride (g-C₃N₄), a hotly researched metal-free photocatalyst, for better application in the efficient removal of organic pollutants, adsorption synergistically enhanced photocatalysis mechanism was thoroughly explored. Based on KOH pore-forming activated biochar (ACB) and K⁺ doped g-C₃N₄ (K-gC₃N₄), the novel activated biochar-based K-gC₃N₄ composite (ACB-K-gC₃N₄) was synthesized via the innovative ultrasonic-milling method. Rhodamine B (RhB), tetracycline (TC), norfloxacin (NOR), and chloramphenicol (CAP) were selected as target pollutants, and the effects of environmental factors, recycling and actual wastewater tests, disinfection effects, and various enhancement strategies were investigated. The results showed that K-gC₃N₄ was successfully composited with ACB by various characterizations, where the loading mass ratio of 1:2 exhibited the best performance. ACB-K-gC₃N₄ possessed a larger specific surface area, richer functional groups, suitable band gap (2.29 eV), and broader visible light absorption (~716 nm) than K-gC₃N₄. ACB-K-gC₃N₄ presented effective removal efficiency over K-gC₃N₄ for four pollutants, in which the removal efficiency of RhB reached 93.26%, and the degradation rate constant of 0.0119 min^-1 was four times higher than K-gC₃N₄ (0.0029 min^-1). Moreover, ACB-K-gC₃N₄ was superior to K-gC₃N₄ in disinfecting S. aureus and E. coli, with a sterilization rate of exceeding 90% for 12 h. The photodegradation activity was dominated by ·O₂^-, h⁺, and ·OH, and the mechanisms involved in the three stages. This was attributed to the unique structure and surface properties (defects and persistent free radicals) of ACB, as evidenced by improved adsorption stage and transfer of degradation intermediates, facilitated the generation of active species, accelerated migration of photogenerated electrons, and inhibited photogenerated carriers recombination by the heterojunction. The good reusability and stability, enhancement strategies (blowing air and heating), and satisfactory feasibility for actual wastewater allow ACB-K-gC₃N₄ possible to promote high-concentration wastewater treatment and disinfection.

Construction of Z-scheme Ag-AgBr/Bi2O2CO3/CNT heterojunctions with remarkable photocatalytic performance using carbon nanotubes as efficient electronic mediators

It is a useful strategy to use a solid electronic mediator with good conductivity to assist the separation of semiconductor photo-induced electron-hole pairs and the redox of semiconductor materials. In order to construct a photocatalyst for more efficient photocatalytic degradation of antibiotics, a simple hydrothermal and precipitation method was used to construct the Ag-AgBr/Bi₂O₂CO₃/CNT Z-scheme heterojunction by using carbon nanotubes (CNTs) as electronic mediators. Compared with the pristine AgBr, Bi₂O₂CO₃, Bi₂O₂CO₃/CNT, the 30%Ag-AgBr/Bi₂O₂CO₃/CNT photocatalyst has better photocatalytic activity under visible light irradiation, showing the best degradation ability to tetracycline (TC). Meanwhile, the photocatalytic properties of 30%Ag-AgBr/Bi₂O₂CO₃/CNT in different pH and inorganic ions were studied. Finally, the degradation pathway and catalytic mechanism of 30%Ag-AgBr/Bi₂O₂CO₃/CNT photocatalytic degradation of TC were also argued. The construction of the Z-scheme electron transport pathway, in which CNTs were used as electronic mediators, and the SPR effect of Ag and Bi metal, which enable the effective separation and transfer of photo-generated electron-hole pairs, are responsible for the significant improvement in photocatalytic performance. It opens up new possibilities for designing and developing high-efficiency photocatalysts with CNTs as the electronic mediator.

New insights into the efficient charge transfer by construction of adjustable dominant facet of BiOI/CdS heterojunction for antibiotics degradation and chromium Cr(VI) reduction under visible-light irradiation

The narrow light-response range and high electron/hole recombination rate greatly restrict the widespread use of photocatalytic technology. The integration of exposing dominant facet of semiconductor and Z-scheme heterostructures designing is expected to break those barriers. Herein，In this work, hydrothermal and ultrasonic stirring methods were used to selectively exposed the (001) and (110) facet of BiOI to construct the BiOI/CdS heterostructures. The obtained BiOI(001)/CdS material shown the maximum degradation for tetracycline-based antibiotics (Oxytetracycline, Tetracycline and Doxycycline), and excellent reduction of hexavalent chromium. Combining the electron spin resonance and scavenger experiments, the superior photocatalytic capacity was attributed to the generation of superoxide and hydroxyl radicals. DFT calculation results shown BiOI(001)/CdS performed high binding energy and adsorption energy for hexavalent chromium, and the different work function between BiOI(001) and CdS confirmed the building of internal electric field, thereby increased the charge separation. Finally, the Gaussian 09 and HPLC-MS program investigated the attack sites of free radicals and degradation pathways in the degradation of antibiotics. This study not only provides a potential photocatalyst, also gives an in-depth understanding of the photocatalytic properties of heterojunctions constructed by different exposed crystal facets.

Emerging bismuth-based direct Z-scheme photocatalyst for the degradation of organic dye and antibiotic residues

Organic dye and antibiotic residues are some of the key substances that can contaminate the environment due to their wide usage in various industries and modern medicine. The degradation of these substances present in waterbodies is essential while contemplating human health. Photocatalysts (PSs) are promising materials that develop highly reactive species instantly by simple solar energy conversion for degrading the organic dye and antibiotic residues and converting them into nontoxic products. Among numerous semiconductors, the bismuth (Bi)-containing PS has received great attention due to its strong sunlight absorption, facile preparation, and high photostability. Owing to the technology advancement and demerits of the traditional methods, a Bi-containing direct Z-scheme PS has been developed for efficient photogenerated charge carrier separation and strong redox proficiency. In this review, a synthetic Bi-based Z-scheme heterojunction that mimics natural photosynthesis is described, and its design, fabrication methods, and applications are comprehensively reviewed. Specifically, the first section briefly explains the role of various semiconductors in the environmental applications and the importance of the Bi-based materials for constructing the Z-scheme photocatalytic systems. In the successive section, overview of Z-scheme PS are concisely discussed. The fourth and fifth sections extensively explain the degradation of the organic dyes and antibiotics utilizing the Bi-based direct Z-scheme heterojunction. Eventually, the conclusions and future perspectives of this emerging research field are addressed. Overall, this review is potentially useful for the researchers involved in the environmental remediation field as a collection of up-to-date research articles for the fabrication of the Bi-containing direct Z-scheme PS.

Facile assembly and excellent elimination behavior of porous BiOBr-g-C3N4 heterojunctions for organic pollutants

Photocatalysis can be an effective technique for eliminating organic contaminants from water. In this study, BiOBr flower-spheres coupled with porous graphite carbon nitride (g-C₃N₄) were synthesized by controlling the dosage of cetyltrimethylammonium bromide (CTAB). Various characterization techniques were then applied to elucidate the structure-performance relationships of the resulting heterojunction photocatalysts in degrading organic dyes. Experimental results established an optimal molar ratio for KBr to CTAB of 5:1. Benefiting from a remarkable porous structure and tight coupling between porous g-C₃N₄ and BiOBr, the optimal BiOBr-g-C₃N₄(2%) exhibited enhanced visible light absorption capability and promoted the separation of photoinduced carriers. Total removal efficiency for rhodamine B (RhB, 25.0 mL, 20.0 mg L^-1) reached 87% within 30 min in the presence of BiOBr-g-C₃N₄(2%) (20.0 mg) (i.e., 1.51 μmol (g_{photocatalyst} min)^-1), which is superior to the performance of BiOBr (72%) (i.e., 1.25 μmol (g_{photocatalyst} min)^-1), g-C₃N₄ (21%) (i.e., 0.37 μmol (g_{photocatalyst} min)^-1). Furthermore, the photocatalytic reaction rate constant over the optimal heterojunction was 0.034 min^-1, which is significantly larger than those of porous g-C3N4 (0.003 min^-1) and BiOBr (0.015 min^-1). Moreover, this type II heterojunction showed good universality for other organic dyes (such as methyl violet, methylene blue, and crystal violet), highlighting a promising potential role in the elimination of environmental pollutants.

Chemical Vapor Deposition Growth of MoS2 on g-C3N4 Nanosheets for Efficient Removal of Tetracycline Hydrochloride

MoS₂ was vertically grown on g-C₃N₄ nanosheets by chemical vapor deposition to prepare nanocomposites named MS-CN samples. Because of a large-surface area of 545.2 m²·g^-1 and a total pore volume of 1.7 cm³·g^-1, the sample MS-CN revealed fast and large adsorption capacity for tetracycline hydrochloride (TCH). The adsorption kinetics model proved that TCH could be rapidly adsorbed within 5 min, and chemical adsorption was dominant. For single-component adsorption of TCH, the maximum adsorption capacity was ∼154 mg/g. The monolayer adsorption was carried out on the surface of MS-CN. Both of the film and intra-particle diffusion were considered as significant processes to facilitate adsorption. Thermodynamic parameters indicate that the adsorption of TCH is a spontaneous endothermic process. The adsorption of TCH was highly pH-dependent. The maximum adsorption capacity of TCH was obtained in the case of pH ∼ 7. After four adsorption and desorption cycles, MS-CN still maintained well-adsorption performance. Multiple adsorption mechanism, pore filling, electrostatic force, π-π conjugation, and hydrogen bonding interactions were studied. Because of fast adsorption, large adsorption capacity, and high stability, it is a promising adsorbent for antibiotics.

Green synthesis of MIL-100(Fe) derivatives and revealing their structure-activity relationship for 2,4-dichlorophenol photodegradation

MIL-100(Fe), a kind of iron-based metal-organic framework materials (MOFs), can be synthesized at room temperature or hydrothermal conditions, which are promising precursor materials for preparing photocatalysts to degrade some recalcitrant chlorophenols in industrial wastewater. However, the relationship between the structural characterization of MIL-100(Fe) derivatives and their photodegradation behavior of chlorophenol pollutants is still unclear. Thus, in this work, a porous Z-scheme α-Fe₂O₃/MIL-100(Fe) composite was successfully fabricated via partial-pyrolysis of MIL-100(Fe) precursor synthesized through green synthesis route, which was further used for degrading high-concentration of 2,4-dichlorophenol under visible-light illumination (λ > 420 nm). The effects of synthesis route and pyrolysis temperature of MIL-100(Fe) on the degradation efficiencies of as-derived materials for 2,4-dichlorophenol were investigated. The structure-activity relationship was illuminated in detail. Otherwise, the influence of several process factors, i.e., initial concentration and pH of the 2,4-dichlorophenol solution, catalyst dosage on the degradation efficiency of 2,4-dichlorophenol has also been performed. The removal efficiency of 2,4-dichlorophenol with the initial concentration of 100 mg L^-1 reached up to 87.65% under optimized conditions. Lastly, the possible mechanism was explored based on trapping experiments and some other characterization results. The study in this paper not only exhibited new insight into the modified α-Fe₂O₃ material with high photocatalytic activity but also provided a promising method for treating wastewater containing 2,4-dichlorophenol or other similar organic pollutants.

Synchronous construction of a porous intramolecular D-A conjugated polymer via electron donors for superior photocatalytic decontamination

The development of conjugated polymers with intramolecular donor-acceptor (D-A) units has the capacity to enhance the photocatalytic performance of carbon nitride (g-C₃N₄) for the removal of antibiotics from ambient ecosystems. This strategy addresses the challenge of narrowing the band gap of g-C₃N₄ while maintaining its high LUMO position. For this study, we introduced the above donor units into g-C₃N₄ to construct intramolecular D-A structures through the copolymerization of dicyandiamide with creatinine, which strategically extended light absorption into the green region and expedited photoelectron separation. The introduction of electron donor blocks kept the LUMO distributed on the melem, which maintained the high LUMO energy level of the copolymer with the potential to generate oxygen radicals. The as-prepared porous D-A conjugated polymer enhanced the photocatalytic degradation of sulfisoxazole with kinetic constants 5.6 times higher than that of g-C₃N₄ under blue light and 15.3 times higher under green light. Furthermore, we surveyed the degradation mechanism including the effective active species and degradation pathways. This study offers a new perspective for the synchronous construction of a porous intramolecular D-A conjugated polymer to enhance water treatment and environmental remediation capacities.

Construction of perylene diimide/CuS supramolecular heterojunction for the highly efficient visible light-driven environmental remediation

Developing photocatalysts that are inexpensive and efficient in degrading pollutants are essential for environmental remediation. Herein, a novel system of perylene diimide (PDI)/CuS p-n heterojunction was synthesized by a two-step self-assembly strategy for removal of tetracycline in waste water. Results showed that PDI/CuS-10% exhibited highest photocatalytic behavior. The apparent rate constants for tetracycline (TC) degradation for the blend were 5.27 and 2.68 times higher than that of CuS or PDI, respectively. The enhancement of photocatalytic activity was mainly attributed to the π-π stacking and p-n junction, which can accelerate the separation of the photo-generated h⁺-e^- pairs. Besides, the light absorption of PDI/CuS from 800 to 200 nm was significantly enhanced and the absorption edge even reached the near-infrared region, which also played an important role in providing desired photocatalytic properties. Surprisingly, PDI/CuS could maintain high catalytic activity even after 5 cycles under simulated conditions, indicating that the composite had high potential for practical applications. Owing to high efficiency, low cost and wide application range, the PDI/CuS nanocomposites are promising candidates for environmental remediation.

Carbon quantum dots sensitized 2D/2D carbon nitride nanosheets/bismuth tungstate for visible light photocatalytic degradation norfloxacin

A novel carbon quantum dots (CQDs) sensitized 2D/2D carbon nitride nanosheets and bismuth tungstate composite (CQD-CNs/BWO) was successfully prepared via the facile hydrothermal method and used for the photocatalytic degradation of norfloxacin (NOR). During 120 min irradiation test, CQD-CNs/BWO exhibited 9 and 1.76 times higher photocatalytic activity than CNs and BWO, respectively. CQDs and constructed 2D/2D structure could not only improve the light harvesting but also promote the generation and separation of electron-holes. The existing inorganic ions in solution (e.g. bicarbonate ions, chlorine ions, and sulfate ions) could inhibit NOR degradation. Based on the electron spin resonance and free radicals inhibition tests, the holes and superoxide radicals rather than hydroxyl radicals were the main reactive species. The intermediates and possible pathways were proposed, and the antibacterial activity of the treated solution after the reaction was evaluated via bacteriostatic tests. The prepared composite material with high photocatalytic activity and stability is potentially effective for the degradation of antibiotics in wastewater.

Accelerated charge transfer in well-designed S-scheme Fe@TiO2/Boron carbon nitride heterostructures for high performance tetracycline removal and selective photo-reduction of CO2 greenhouse gas into CH4 fuel

Designing and fabrication of smart hybrid multifunctional materials for energy/fuel production and environmental detoxification is indeed of great significance for sustainable development. Herein, we synthesized a new well-structured S-scheme heterostructure Fe@TiO₂/Boron Carbon nitride (FT/BCN) with high performance tetracycline degradation and selective CO₂ photo-reduction to CH₄. Under visible light irradiation, 96.3% tetracycline was degraded in 60 min using best performing FT30/BCN sample with a high 83.2% total organic carbon removal in 2 h. The tetracycline degradation rate for FT30/BCN composite catalyst was ∼7 times than bare boron carbon nitride (BCN). The impact of reaction parameters as pH, presence of interfering electrolytes, light source and water matrix was also investigated. The FT30/BCN photocatalyst shows dramatic improvement in CO₂ photoreduction as exhibited in 24.7 μmol g^-1 h^-1 CH₄ and 2.4 μmol g^-1 h^-1 CO evolutions with optimal 91.1% CH₄ selectivity. Pure BCN shows a poor 39.1% selectivity. Further, effect of alkali activation, CO₂/H₂O feed ratio, reducing agent and light source onto CH₄ production and selectivity was also investigated. The CH₄ evolution and selectivity was improved because of enhanced visible light absorption, high adsorption potential, charge carrier separation and high reducing power of photogenerated electrons induced by an effective S-scheme heterojunction between Fe@TiO₂ and boron carbon nitride. An S-scheme (step-scheme) charge transfer mechanism is here operative both during tetracycline removal and CO₂ reduction. The drug degradation route and photocatalytic mechanism for antibiotic removal and CO₂ reduction was also predicted.

Hollow Core-Shell potassium Phosphomolybdate@Cadmium Sulfide@Bismuth sulfide Z-Scheme tandem heterojunctions toward optimized Photothermal-Photocatalytic performance

A hollow core-shell potassium phosphomolybdate (KMoP)@cadmium sulfide (CdS)@bismuth sulfide (Bi₂S₃) Z-scheme tandem heterojunction is fabricated by a simple hydrothermal strategy and kept in a water bath to continue the reaction. At the same time, the ternary structure combined Keggin-type polyoxometalate with two photosensitive sulfide semiconductors to form a stable hollow core-shell heterojunction. KMoP@CdS@Bi₂S₃ with a narrow band gap of ∼ 1.2 eV also has excellent photothermal performance, which may further promote photocatalytic efficiency. The hollow core-shell KMoP@CdS@Bi₂S₃ tandem heterojunction shows excellent H₂ production performance, Cr^VI reduction ability and photocatalytic degradation performance of highly toxic tetracycline (TC). Under visible light irradiation, the photocatalytic H₂ generation rate of the KMoP@CdS@Bi₂S₃ tandem heterojunction reaches 831 μmol h^-1, which is 103 times higher than that of pristine KMoP. The photocatalytic reduction efficiency of Cr^VI and degradation efficiency of TC are as high as 95.5 and 97.51%, ∼4 times higher than that of KMoP. The boosted photocatalytic performance can be ascribed to the formation of core-shell Z-scheme tandem heterojunctions favoring spatial charge separation and the narrow band gap, which extends the photoresponse to visible light/NIR regions. When TC and Cr^VI exist at the same time, the reduction efficiency of Cr^VI can be as high as 99.64% because the intermediate of TC degradation can promote the reduction of Cr^VI. In addition, the photocatalytic performance of the KMoP@CdS@Bi₂S₃ heterojunction remains nearly constant after 4 recycles, which indicates high stability. The design strategy may provide new insights for preparing other high-performance core-shell tandem heterojunction photocatalysts for solar energy conversion.

Investigation of the Kinetics and Reaction Mechanism for Photodegradation Tetracycline Antibiotics over Sulfur-Doped Bi2WO6-x/ZnIn2S4 Direct Z-Scheme Heterojunction

The rational design of direct Z-scheme heterostructural photocatalysts using solar energy is promising for energy conversion and environmental remediation, which depends on the precise regulation of redox active sites, rapid spatial separation and transport of photoexcited charge and a broad visible light response. The Bi₂WO₆ materials have been paid more and more attention because of their unique photochemical properties. In this study, S²⁻ doped Bi₂WO_6-x coupled with twin crystal ZnIn₂S₄ nanosheets (Sov−BWO/T−ZIS) were prepared as an efficient photocatalyst by a simple hydrothermal method for the removal of tetracycline hydrochloride (TCH). Multiple methods (XRD, TEM, XPS, EPR, UV vis DRS, PL etc.) were employed to systematically investigate the morphology, structure, composition and photochemical properties of the as-prepared samples. The XRD spectrum indicated that the S²⁻ ions were successfully doped into the Sov−BWO component. XPS spectra and photoelectrochemical analysis proved that S²⁻ served as electronic bridge and promoted captured electrons of surface oxygen vacancies transfer to the valence band of T−ZIS. Through both experimental and in situ electron paramagnetic resonance (in situ EPR) characterizations, a defined direct Z-scheme heterojunction in S-BWO/T−ZIS was confirmed. The improved photocatalytic capability of S-BWO/T−ZIS results ascribed that broadened wavelength range of light absorption, rapid separation and interfacial transport of photoexcited charge, precisely regulated redox centers by optimizing the interfacial transport mode. Particularly, the Sov−50BWO/T−ZIS Z-scheme heterojunction exhibited the highest photodegradation rate was 95% under visible light irradiation. Moreover, this heterojunction exhibited a robust adsorption and degradation capacity, providing a promising photocatalyst for an organic pollutant synergistic removal strategy.