Recovering chemical sludge from the zero liquid discharge system of flue gas desulfurization wastewater as flame retardants by a stepwise precipitation process

A review of chloride ions removal from high chloride industrial wastewater: Sources, hazards, and mechanisms

To reduce metal pipe corrosion, improve product quality, and meet zero liquid discharge (ZLD) criteria, managing chloride ion concentrations in industrial wastewaters from metallurgical and chemical sectors has become increasingly important. This review provides detailed information on the sources, concentration levels, and deleterious effects of chloride ions in representative industrial wastewaters, and also summarizes and discusses various chloride ion removal techniques, including precipitation, ion exchange, physical separation, and advanced oxidation (AOPs). Among these, AOPs are particularly promising due to their ability to couple with other technologies and the diversity of their auxiliary technologies. The development of dechlorination electrode materials by electro-adsorption (CDI) can be inspired by the electrode materials used in chloride ion battery (CIB). This review also provides insights into exploring the effective combination of multiple chloride removal mechanisms, as well as the development of environmentally friendly composite materials. This review provides a theoretical basis and development direction for the effective treatment and secondary utilization of chlorine-containing industrial wastewater in the future.

Chloride removal from flue gas desulfurization wastewater through Friedel's salt precipitation method: A review

As a high efficiency method for chloride removal, Friedel's salt precipitation (FSP) method has attracted much attention in zero liquid discharge (ZLD) of flue gas desulfurization (FGD) wastewater. This review provides comprehensive knowledge of FSP method for chloride removal through analysis of the evolution, reaction mechanisms and influential factors, and describes the recent research progress. FSP method is a cost-efficient technology to remove chloride from saline wastewater by adding lime and aluminate. Chloride ions react with the precipitants by adsorption or/and ion exchange to form Friedel's salt, which is affected by the reaction conditions including reaction time, temperature, interferential ions, etc. The effluent of this process can be reused as the makeup water of desulfurization tower, and the dechloridation precipitates can be reclaimed as adsorption materials and sludge conditioners. That can not only offset a fraction of the treatment cost, but also avoid secondary pollution, so ZLD of FGD wastewater can be achieved. This paper summarizes the deficiencies and potential improvement measures of FSP method. We believe this technology is a promising way to achieve ZLD of FGD wastewater and other wastewater containing chloride, and expect FSP method would become more mature and be widely applied in hypersaline wastewater treatment in the foreseeable future.

The pretreatment effects of various target pollutant in real coal gasification gray water by coupling pulse electrocoagulation with chemical precipitation methods

To prevent the scale formation in the equipments and pipelines after pre-treated coal gasification gray water (CGGW) entering the reuse system and reduce the influence of various pollutants in the effluent on subsequent biochemical treatment, this study presented a coupled use of pulse electrocoagulation (PEC) and chemical precipitation (CP) coupling method for the pretreatment of coal gasification gray water (CGGW). In addition, the operation parameters of PEC and the reaction conditions of PEC-CP were optimized based on iron plate as electrode and total hardness, turbidity and sludge yield as assessment indicators. Due to the formation of multi-hydroxyl iron by several minutes of pulse current, and the addition of pH regulator and coagulant aid, the efficient removal of various ions, hardness and turbidity was significantly reduced via various mechanism such as redox, precipitation, adsorption and coagulation reaction. The result indicated that under the optimal operation conditions, the total hardness, turbidity, and Feⁿ⁺ of PEC-CP effluents were 275.0 mg/L, 3.0 NTU and 5.6 mg/L, respectively and sludge amount was 0.88 kg/m³. The removal rates of Si, B, Mn, Ba, COD, NPOC and NH₄⁺-N by PEC-CP reached 80.0%, 75.4%, 97.0%, 99.8%, 35.0%, 33.6% and 23.8%, respectively. The present results suggested that the CGGW pretreatment effluents could be not only reused directly, but also greatly alleviate the scaling problem of water pipeline and coal gasification production facilities.

Removal of chloride from water and wastewater: Removal mechanisms and recent trends

Increased chloride concentration can cause salinization, which has become a serious and widespread environmental problem nowadays. This review aims at providing comprehensive and state-of-the-art knowledge and insights of technologies for chloride removal. Mechanisms for chloride removal mainly include chemical precipitation, adsorption, oxidation and membrane separation. In chemical precipitation, chloride removal by forming CuCl, AgCl, BiOCl and Friedel's salt. Adsorbents used in chloride removal mainly include ion exchangers, bimetal oxides and carbon-based electrodes. Oxidation for chloride removal contains ozone-based, electrochemical and sulfate radical-based oxidation. Membrane separation for chloride removal consists of diffusion dialysis, nanofiltration, reverse osmosis and electrodialysis. In this review, we specifically proposed the factors that affect chloride removal process and the corresponding strategies for improving removal efficiency. In the last section, the remaining challenges of method explorations and material developments were stated to provide guidelines for future development of chloride removal technologies.