Hazardous impact of diclofenac on mammalian system: Mitigation strategy through green remediation approach

Periodate activation and pH regulation using ball-milled metal-oxide-mineral-biochar composite for removal of antibiotics from contaminated water

The inclusion of mineral salts in carbon activators are beneficial for advanced oxidation processes (AOPs). Herein, we present the application of ball-milled biochar with phosphate salt for periodate (IO4-) activation and degradation of antibiotics in contaminated water. Physical characterization results showed that the catalyst is infused with Mg3(PO4)2 and ball-milling increased the specific surface area to 216 m2 g-1 from 46 m2 g-1 while reducing the particle size to less than 1.0 μ. The optimized system successfully eliminated >99% of diclofenac while maintaining the pH of the reaction medium to circumneutral levels. Scavenger and ESR experiments revealed the degradation is triggered by O2•-, 1O2 and •OH species within the system. Electrochemical studies confirmed electron transfer during diclofenac degradation. The reported system demonstrated high degradation efficiency under both neutral and acidic pH conditions. Based on the by-product analysis, the degradation pathway of diclofenac was elucidated. Further, the toxicity assessment for the identified intermediates showed minimum toxicity of the degraded products. This mineral-biochar composite exhibited promising performance in eliminating other antibiotic substances. Therefore, the present finding highlights the importance of raw materials selection for producing mineral-biochar composite that provide new insights into IO4- activation for antibiotic removal by maintaining the natural pH.

The Protective Effects of Vitamin B Complex on Diclofenac Sodium-Induced Nephrotoxicity: The Role of NOX4/RhoA/ROCK

Diclofenac sodium (DIC) is a widely used non-steroidal anti-inflammatory drug. Unfortunately, its prolonged use is associated with nephrotoxicity due to oxidative stress, inflammation, and fibrosis. We aimed to investigate the nephroprotective effects of vitamin B complex (B1, B6, B12) against DIC-induced nephrotoxicity and its impact on NOX4/RhoA/ROCK, a pathway that plays a vital role in renal pathophysiology. Thirty-two Wistar rats were divided into four groups: (1) normal control; (2) vitamin B complex (16 mg/kg B1, 16 mg/kg B6, 0.16 mg/kg B12, intraperitoneal); (3) DIC (10 mg/kg, intramuscular); and (4) DIC plus vitamin B complex group. After 14 days, the following were assayed: serum renal biomarkers (creatinine, blood urea nitrogen, kidney injury molecule-1), oxidative stress, inflammatory (tumor necrosis factor-α, interleukin-6), and fibrotic (transforming growth factor-β) markers as well as the protein levels of NOX4, RhoA, and ROCK. Structural changes, inflammatory cell infiltration, and fibrosis were detected using hematoxylin and eosin and Masson trichrome stains. Compared to DIC, vitamin B complex significantly decreased the renal function biomarkers, markers of oxidative stress and inflammation, and fibrotic cytokines. Glomerular and tubular damage, inflammatory infiltration, and excessive collagen accumulation were also reduced. Protein levels of NOX4, RhoA, and ROCK were significantly elevated by DIC, and this elevation was ameliorated by vitamin B complex. In conclusion, vitamin B complex administration could be a renoprotective approach during treatment with DIC via, at least in part, suppressing the NOX4/RhoA/ROCK pathway.

Cobalt-copper bimetallic selenides embedded in nitrogen-doped porous carbon nanocubes for diclofenac electrochemical sensing

Diclofenac (DCF) is a non-steroidal anti-inflammatory drug (NSAID), and its overuse poses a potential threat to human health and the aquatic environment, designing high-efficiency electrocatalysts for DCF detection is urgent. Herein, cobalt-copper bimetallic selenides embedded in nitrogen-doped porous carbon nanocubes (CoCuSe@NC) were elaborately designed via one-step in situ selenization of bimetallic CoCu-MOF. The chemical constituents and micromorphology of CoCuSe@NC composites can be further optimized by precisely regulating the selenization process and the doping ratio of bimetal in MOF precursor. As an electrocatalyst, CoCuSe@NC was proved to be highly efficient in electrochemical sensing of DCF with a broad linear range of 0.1-400 µmol/L and a detection limit of 0.024 µmol/L. This was attributed to the synergistic advantages between the heterogeneous structures, which produced more electrochemically active sites, effectively shortened the electron transport path, and improved electrocatalytic performance. Consequently, the constructed sensor exhibits high sensitivity, remarkable stability and applicability, and in particular can selectively detect DCF from other structurally similar coexisting analogs, resulting from the unique metal chelation ability. This work paves the way for designing effective bimetallic selenide electrocatalysts and exploring their applications in DCF electrochemical sensing.

Diclofenac Interacts with Photosynthetic Apparatus: Isolated Spinach Chloroplasts and Thylakoids as a Model System

Diclofenac, often detected in environmental samples, poses a potential hazard to the aquatic environment. The present study aimed to understand the effect of this drug on photosynthetic apparatus, which is a little-known aspect of its phytotoxicity. Chloroplasts and thylakoids isolated from spinach (Spinacia oleracea) were used for this study and treated with various concentrations of diclofenac (from 125 to 4000 μM). The parameters of chlorophyll a fluorescence (the OJIP test) as measurements for both the intact chloroplasts and the thylakoid membranes revealed that isolated thylakoids showed greater sensitivity to the drug than chloroplasts. The relatively high concentration of diclofenac that is required to inhibit chloroplast and thylakoid functions suggests a narcotic effect of that drug on photosynthetic membranes, rather than a specific interaction with a particular element of the electron transport chain. Using confocal microscopy, we confirmed the degradation of the chloroplast structure after DCF treatment, which has not been previously reported in the literature. In conclusion, it can be assumed that diclofenac's action originated from a non-specific interaction with photosynthetic membranes, leading to the disruption in the function of the electron transport chain. This, in turn, decreases the efficiency of photosynthesis, transforming part of the PSII reaction centers into heat sinks and enhancing non-photochemical energy dissipation.

Electrochemical degradation of diclofenac generates unexpected thyroidogenic transformation products: Implications for environmental risk assessment

Diclofenac (DCF) is an environmentally persistent, nonsteroidal anti-inflammatory drug (NSAID) with thyroid disrupting properties. Electrochemical advanced oxidation processes (eAOPs) can efficiently remove NSAIDs from wastewater. However, eAOPs can generate transformation products (TPs) with unknown chemical and biological characteristics. In this study, DCF was electrochemically degraded using a boron-doped diamond anode. Ultra-high performance liquid chromatography coupled with high-resolution mass spectrometry was used to analyze the TPs of DCF and elucidate its potential degradation pathways. The biological impact of DCF and its TPs was evaluated using the Xenopus Eleutheroembryo Thyroid Assay, employing a transgenic amphibian model to assess thyroid axis activity. As DCF degradation progressed, in vivo thyroid activity transitioned from anti-thyroid in non-treated samples to pro-thyroid in intermediately treated samples, implying the emergence of thyroid-active TPs with distinct modes of action compared to DCF. Molecular docking analysis revealed that certain TPs bind to the thyroid receptor, potentially triggering thyroid hormone-like responses. Moreover, acute toxicity occurred in intermediately degraded samples, indicating the generation of TPs exhibiting higher toxicity than DCF. Both acute toxicity and thyroid effects were mitigated with a prolonged degradation time. This study highlights the importance of integrating in vivo bioassays in the environmental risk assessment of novel degradation processes.

Removal of diclofenac sodium from aqueous solution using different ionic liquids functionalized tragacanth gum hydrogel prepared by radiation technique

Diclofenac sodium (DCF) was reported as an important emerging environmental pollutant and its removal from wastewater is very urgent. In this study, different alkyl substituted ionic liquids (1-alkyl -3-vinyl- imidazolium bromide [CnVIm]Br, n = 4, 6, 8, 10, 12) functionalized tragacanth gum (TG-CnBr) are prepared by radiation induced grafting and crosslinking polymerization. The adsorption behaviors of ionic liquids functionalized tragacanth gum for diclofenac sodium from aqueous solutions are examined. The adsorption capacity of TG-CnBr for diclofenac sodium increases with the increasing of alkyl chain length of the imidazolium cation and the hydrophobicity of the hydrogels. The maximum adsorption capacity by TG-C12Br for diclofenac sodium at 30, 40 and 50 °C were 327.87, 310.56 and 283.29 mg/g, respectively. The adsorption of TG-C12Br towards diclofenac sodium was little decreased with NaCl increasing. The removal efficiency was still remained 94.55 % within 5 adsorption-desorption cycles by 1 M HCl. Also, the adsorption mechanism including electrostatic attraction, hydrophobic interaction, hydrogen bonding, and π - π interaction was proposed.

Physiological responses on the reproductive, metabolism and stress endpoints of Astyanax lacustris females (Teleostei: Characiformes) after diclofenac and ibuprofen exposure

Diclofenac (DCF) and ibuprofen (IBU) are pharmaceutical compounds frequently detected in aquatic compartments worldwide. Several hazard effects including developmental abnormalities and redox balance impairment have been elucidated in aquatic species, but multiple endocrine evaluations are scarce. Therefore, the present study aimed to assess the disruptive physiological effects and toxicity of DCF and IBU isolated and combined, using females of the native freshwater teleost Astyanax lacustris. In regards to NSAIDs bioavailability, the results showed absence of degradation of IBU and DCF after 7 days of exposure. IBU LC50 for A. lacustris was 137 mgL-1 and females exposed to IBU isolated increased thyroxine (T4) concentration at 24 h and decreased after 96 h; DCF exposure decreased triiodothyronine (T3) concentration at 96 h. Circulating levels of 17β-estradiol (E2), cortisol (F) and testosterone (T) were not affected by any treatment. HPG and HPI axis genes fshβ, pomc and vtg were upregulated after 24 h of IBU exposure, and dio2 was downregulated in DCF fish exposed group after 96 h compared to the mixture. Protein concentration was reduced in muscle and increased in the liver by DCF and mixtures exposures at 24 h; while liver lipids were increased in the mixture groups after 96 h. The study point out the capacity of NSAIDs to affect endocrine endpoints in A. lacustris females and induce changes in energetic substrate content after acute exposure to isolated and mixed NSAIDs treatments. Lastly, the present investigation brings new insights into the toxicity and endocrine disruptive activity of NSAIDs in Latin America teleost species and the aquatic environment.

Toxic effects of organophosphate pesticide monocrotophos in aquatic organisms: A review of challenges, regulations and future perspectives

In recent times, usage of pesticide, herbicides and synthetic fertilizers in farming lands has made the environment worse. The pesticide residues and toxic byproducts from agricultural lands were found to contaminate the aquatic ecosystem. The misuse of synthetic pesticide not only affects the environment, but also affects the health status of aquatic organisms. The organophosphate pesticide pollutants are emerging contaminants, which threatens the terrestrial and aquatic ecosystem. Monocrotophos (MCP) is an organophosphate insecticide, utilized on crops including rice, maize, sugarcane, cotton, soybeans, groundnuts and vegetables. MCP is hydrophilic in nature and their solubilizing properties reduce the soil sorption which leads to groundwater contamination. The half-life period of MCP is 17-96 and the half-life period of technical grade MCP is 2500 days if held stable at 38 °C in a container. MCP causes mild to severe confusion, anxiety, hyper-salivation, convulsion and respiratory distress in mammals as well as aquatic animals. The MCP induced toxicity including survival rate, behavioural changes, reproductive toxicity and genotoxicity in different aquatic species have been discussed in this review. Furthermore, the ultimate aim of this review is to highlight the international regulations, future perspectives and challenges involved in using the MCP.

Biotransformation of diclofenac by isolated super-degrader Pseudomonas sp. DCα4: Postulated pathways, and attenuated ecotoxicological effects

Significant concentrations of emerging xenobiotics, like diclofenac (DCF), possessing severe irreversible eco-toxicological threats, has been detected in aquatic systems worldwide, raising the concerns. This present investigation is intended to explore an efficient solution to support the existing wastewater treatment policies to handle DCF contamination by bacteria-mediated biotransformation. DCF-tolerant bacterial strains were isolated from pharmaceutical wastewater and selected based on their non-virulence nature and degradation ability. Among those, Pseudomonas sp. DCα4 was found to be the most dominant DCF degrader exhibiting 99.82% removal of DCF confirmed by HPLC after optimization of temperature at 30.02 °C, pH at 6.9, inoculum of 4.94%, and time 68.02 h. The degradation kinetics exhibited the process of DCF degradation followed a first-order kinetics with k of 0.108/h and specific degradation rate of 0.013/h. Moreover, the enzyme activity study indicated predominant hydrolase activity in the DCF treatment broth of DCα4, implying hydrolysis as the main force behind DCF biotransformation. HRMS analysis confirmed the presence of 2-hydroxyphenylacetic acid, 1,3-dichloro,2-amino, 5-hydroxybenzene, and benzylacetic acid as major intermediates of DCF biodegradation indicating non-specific hydrolysis of DCF. Whole genome analysis of most related strains which were confirmed by near full 16S rRNA gene sequence homology study, predicted involvement of different N-C bond hydrolase producing genes like puud, atzF, astB, nit1, and nylB. The ecotoxicological study using Aliivibrio fischeri exhibited 47.51% bioluminescence inhibition by DCF-containing broth which was comparable to the same caused by 1 mg/mL of K2Cr2O7 whereas remediated broth exhibited only 0.51% inhibition implying reduction of the ecotoxic load caused by DCF contamination. Cost analysis revealed that possible integration of the process with existing ones would increase per litre expense by $0.45. These results indicated that the described process of DCF biodegradation using the super-degrader DCα4 would be an advancement of existing pharmaceutical wastewater treatment processes for DCF bioremediation.

Graphite/carbon-doped TiO2 nanocomposite synthesized by ultrasound for the degradation of diclofenac

Graphite/C-doped TiO2 nanocomposite was synthesized at room temperature using a simple, impressive, and indirect sonication (20 kHz) by the cup horn system. Tetrabutyltitanate as the precursor of titanium and graphite (G) as the carbon source was used in the preparation of nanocomposite as a photocatalyst. The molar ratio of G/TiO2 as a key parameter was investigated in the synthesis of G/C-doped TiO2. The obtained materials were widely characterized using XRD, SEM, TEM, FTIR, XPS, and UV-Vis diffuse reflectance techniques. The UV-Vis diffuse reflectance spectroscopy results showed that the edge of light absorption of nanocomposite was distinctly red-shifted to the visible area via carbon doping. The XPS outcomes acknowledged the existence of the C, Ti, and O in the photocatalyst. The composite showed an enhancement in the dissociation efficiency of photoinduced charge carriers through the doping process. The photocatalytic activity of the synthesized nanocomposite was checked with diclofenac (DCF) as a pharmaceutical contaminant. The results displayed that G/C-doped TiO2 represented better photocatalytic performance for DCF than TiO2. This was due to the excellent crystallization, intense absorption of visible light, and the impressive separation of photoinduced charge carriers. Various active species such as •OH, •O2¯, h+, and H2O2 play a role in the degradation of DFC. Therefore, different scavengers were used and the role of each one in degradation was investigated. According to the obtained results, •O2¯ radical showed a major role in the photocatalytic process. This work not only proposes a deep insight into the photosensitization-like mechanism by using G-based materials but also develops new photocatalysts for the removal of emerging organic pollutants from waters using sunlight as available cheap energy.

In Situ Monitoring of the Polymerization Kinetics of Organic Pollutants during Persulfate-Based Advanced Oxidation Processes Using Plasmonic Colorimetry

Using sulfate radicals to initiate polymer production in persulfate-based advanced oxidation processes (AOPs) is an emerging strategy for organics removal. However, our understanding of this process remains limited due to a dearth of efficient methods for in situ and real time monitoring of polymerization kinetics. This study leverages plasmonic colorimetry to monitor the polymerization kinetics of an array of aromatic pollutants in the presence of sulfate radicals. We observed that the formation of polymer shells on the surfaces of gold nanoparticles (AuNPs) led to an increase and red shift in their localized surface plasmon resonance (LSPR) band as a result of an increased refractive index surrounding the AuNP surfaces. This observation aligns with Mie theory simulations and transmission electron microscopy-electron energy loss spectroscopy characterizations. Our study demonstrated that the polymerization kinetics exhibits a significant reliance on the electrophilicity and quantity of benzene rings, the concentration of aromatic pollutants, and the dosage of oxidants. In addition, we found that changes in LSPR band wavelength fit well into a pseudo-first-order kinetic model, providing a comprehensive and quantitative insight into the polymerization kinetics involving diverse organic compounds. This technique holds the potential for optimizing AOP-based water treatment by facilitating the polymerization of aromatic pollutants.

The effect of tyrosol on diclofenac sodium-induced acute nephrotoxicity in rats

Although diclofenac (DCF) is a nonsteroidal anti-inflammatory drug that is considered safe, its chronic use and overdose may show some toxic effects. The protective effect of tyrosol (Tyr) pretreatment against DCF-induced renal damage was investigated in this study. The 32 rats used in the study were randomly divided into four groups of eight rats each. According to the data obtained, it was determined that creatinine, urea, and blood urea nitrogen (BUN) levels increased in serum samples of the DCF group. Besides, the levels of reduced glutathione (GSH) and glutathione peroxidase (GPx) activity decreased and the malondialdehyde (MDA) level increased in the kidney tissue. However, no change was observed in catalase (CAT) activity. Cyclooxygenase-2 (COX-2), nuclear factor kappa B (NF-κB), and tumor necrosis factor-alpha (Tnf-α) levels increased and nuclear factor erythroid 2-related factor 2 (Nrf-2) levels decreased. No change was detected in the level of interleukin 1 beta (IL-1β). When the DCF+Tyr group and the DCF group were compared, it was assessed that Tyr had a curative effect on all biochemical parameters. Also, kidney damages, such as degeneration and necrosis of tubular epithelium and congestion of veins, were obviated by treatment with tyrosol in histopathological examinations. It was determined that Tyr pretreatment provided a protective effect against nephrotoxicity induced by DCF with its anti-inflammatory and antioxidant properties.

NiFe-PANI composites synthesized by electrodeposition for enhanced photocatalytic degradation of diclofenac sodium from wastewater

A simple inexpensive approach was used to synthesize NiFe-PANI nanocomposites and used for photodegradation of diclofenac sodium (DCF) in water sources. Morphological, optical, structural, and catalytic properties of the nanocomposites were investigated using X-ray diffraction (XRD) to confirm the cubic structure of NiFe nanoparticles and Fourier-transform infrared spectroscopy (FTIR) that revealed the presence of NiFe and PANI, scanning electron microscopy (SEM) showed the uniform distribution of NiFe nanoparticles onto the surface of PANI, Energy-Dispersive X-ray spectroscopy (EDX) was utilized to validate the composition of the obtained Permalloy NiFe-PANI nanocomposites, optical properties confirmed the decrease of Eg band gap from 2.62 to 2.51 eV by the addition of NiFe. The NiFe-PANI composite showed superior photocatalytic efficiency in degrading DCF, achieving 82.53% degradation in 15 min and 97.89% in 60 min. This was significantly higher than the PANI alone, which achieved 62.72 and 93.48% degradation in the same time intervals respectively. The results indicated that the photocatalytic efficiency remained consistent, with no observable decrease, even after five cycles of recycling. The NiFe-PANI catalyst served as an efficient and cost-effective photocatalyst for DCF degradation, and the study holds promise for the photocatalytic removal of other organic pollutants from water and wastewater.

Mechanochemical Degradation of Caffeine and Diclofenac Using Biochar of Fique Bagasse in the Presence of Al: Monitoring by Mass Spectrometry

Much research has been carried out to remove emerging contaminants using diverse materials. Furthermore, studies related to pollutant degradation have increased over the past decade. Mechanochemical degradation can successfully decompose molecules that are persistent in the environment. In this study, the biochar of fique bagasse with mixtures SiO2, Al, Al2O3, and Al-Al2O3 was treated with a mechanochemical technique using a planetary ball mill to investigate the degradation of caffeine and diclofenac. These tests resulted in the transformation of caffeine and diclofenac due to the use of Al employing mechanochemistry. In fact, through the use of liquid chromatography coupled with mass spectrometry, eight and six subproducts were identified for caffeine and diclofenac, respectively. Additionally, analysis of the molecules proposed for caffeine and diclofenac transformation suggested hydroxylation, demethylation, decarboxylation, oxidation reactions, and cleavage of the C-C and C-N bonds in the pollutants studied. The formation of these transformation products could be possible by reductant oxygen species generated from the molecular oxygen in the presence of aluminum and the energy delivered for ball milling. The results obtained show the potential application in the environmental management of mechanochemical treatment in the elimination of emerging contaminants caffeine and diclofenac.

Mesostructured lead dioxide grown on titania nanotubes for diclofenac water removal through electrocatalytic and photoelectrocatalytic processes

Mesostructured PbO2/TiO2 materials were synthesized to perform electrocatalysis (as electrooxidation, EO) and photoelectrocatalysis for removing diclofenac (DCF), 15 ppm concentration in 0.1 M NaSO4 solutions, at different pH conditions (3.0, 6.0 and 9.0) by applying 30 mA cm-2. Titania nanotubes (TiO2NTs)-based materials were prepared to synthetize with a massive PbO2 deposit on this support to obtain TiO2NTs/PbO2 and a TiO2NTs:PbO2 material consisting in a dispersed PbO2 deposit on TiO2-NTs that allowed the formation of a heterostructured surface of combined composition (TiO2 and PbO2). Organics removal (DCF and byproducts) was monitored through UV-vis spectrophotometry and high-performance liquid chromatography (HPLC) during degradation tests. TiO2NTs/PbO2 electrode was tested in both processes, removing DCF at neutral and alkaline solution conditions in EO while an unimportant photoactivity was registered at this material. Conversely, TiO2NTs:PbO2 was used as electrocatalytic material in EO experiments, achieving more than 50% of DCF removal at pH 6.0 by applying 30 mA cm-2. Also, for first time, the synergic effect was investigated when it was exposed to UV irradiation in photoelectrocatalytic experiments, enhancing its efficacy (⁓more than 20%) to remove DCF from a solution with 15 ppm over performance removals achieved (56%) when EO was applied under similar conditions. Chemical Oxygen Demand (COD) analyses showed that significantly higher DCF degradation is reached under photoelectrocatalysis, since COD values decrease a 76% against a 42% decrease achieved with electrocatalysis. Scavenging experiments showed a significant participation on the pharmaceutical oxidation process through the generation of photoholes (h+), hydroxyl radicals and sulfate-based oxidants.

Adsorptive and photocatalytic degradation potential of porous polymeric materials for removal of pesticides, pharmaceuticals, and dyes-based emerging contaminants from water

Life on earth is dependent on clean water, which is crucial for survival. Water supplies are getting contaminated due to the growing human population and its associated industrialization, urbanization, and chemically improved agriculture. Currently, a large number of people struggle to find clean drinking water, a problem that is particularly serious in developing countries. To meet the enormous demand of clean water around the world, there is an urgent need of advanced technologies and materials that are affordable, easy to use, thermally efficient, portable, environmentally benign, and chemically durable. The physical, chemical and biological methods are used to eliminate insoluble materials and soluble pollutants from wastewater. In addition to cost, each treatment carries its limitations in terms of effectiveness, productivity, environmental effect, sludge generation, pre-treatment demands, operating difficulties, and the creation of potentially hazardous byproducts. To overcome the problems of traditional methods, porous polymers have distinguished themselves as practical and efficient materials for the treatment of wastewater because of their distinctive characteristics such as large surface area, chemical versatility, biodegradability, and biocompatibility. This study overviews improvement in manufacturing methods and the sustainable usage of porous polymers for wastewater treatment and explicitly discusses the efficiency of advanced porous polymeric materials for the removal of emerging pollutants viz. pesticides, dyes, and pharmaceuticals whereby adsorption and photocatalytic degradation are considered to be among the most promising methods for their effective removal. Porous polymers are considered excellent adsorbents for the mitigation of these pollutants as they are cost-effective and have greater porosities to facilitate penetration and adhesion of pollutants, thus enhance their adsorption functionality. Appropriately functionalized porous polymers can offer the potential to eliminate hazardous chemicals and making water useful for a variety of purposes thus, numerous types of porous polymers have been selected, discussed and compared especially in terms of their efficiencies against specific pollutants. The study also sheds light on numerous challenges faced by porous polymers in the removal of contaminants, their solutions and some associated toxicity issues.

Phytoremediation of diclofenac using the Green Liver System: Macrophyte screening to system optimization

Green Liver Systems employ the ability of macrophytes to take up, detoxify (biotransform), and bioaccumulate pollutants; however, these systems require optimization to target specific pollutants. In the present study, the aim was to test the applicability of the Green Liver System for diclofenac remediation considering the effects of selected variables. As a starting point, 42 macrophyte life forms were evaluated for diclofenac uptake. With the three best performing macrophytes, the system efficiency was evaluated at two diclofenac concentrations, one environmentally relevant and that other significantly higher (10µg/L and 150µg/L) and in two system sizes (60L and 1000L) as well as at three flow rates (3, 7, and 15L/min). The effect of single species and combinations on removal efficiency was also considered. The highest internalization percentage was recorded in Ceratophyllum spp., Myriophyllum spp., and Egeria densa. Phytoremediation efficiency with species combinations was far superior to utilizing only a single macrophyte type. Furthermore, the results indicate that the flow rate significantly affected the removal efficiency of the pharmaceutical tested, with the highest remediation efficiency obtained with the highest flow rate. System size did not significantly affect phytoremediation; however, increase diclofenac concentration reduced the systems performance significantly. When planning the setup of a Green Liver System for wastewater remediation, basic knowledge about the water, i.e., pollutant types and flow, must be utilized during planning to optimize remediation. Various macrophytes show diverse uptake efficiencies for different contaminants and should be selected based on the pollutant composition of the wastewater.

Complete oxidative degradation of diclofenac via coupling free radicals and oxygenases of a micro/nanostructured biogenic Mn oxide composite from engineered Pseudomonas sp. MB04R-2

Oxidative degradation can effectively degrade aromatic emerging contaminants (ECs). However, the degradability of lone inorganic/biogenic oxides or oxidases is typically limited when treating polycyclic ECs. Herein, we report a dual-dynamic oxidative system comprising engineered Pseudomonas and biogenic Mn oxides (BMO), which completely degrades diclofenac (DCF), a representative halogen-containing polycyclic EC. Correspondingly, recombinant Pseudomonas sp. MB04R-2 was constructed via gene deletion and chromosomal insertion of a heterologous multicopper oxidase cotA, allowing for enhanced Mn(II)-oxidizing activity and rapid formation of the BMO aggregate complex. Additionally, we characterized it as a micro/nanostructured ramsdellite (MnO₂) composite using multiple-phase composition and fine structure analyses. Furthermore, using real-time quantitative polymerase chain reaction, gene knockout, and expression complementation of oxygenase genes, we demonstrated the central and associative roles of intracellular oxygenases and cytogenic/BMO-derived free radicals (FRs) in degrading DCF and determined the effects of FR excitation and quenching on the DCF degradation efficiency. Finally, after identifying the degraded intermediates of ²H-labeled DCF, we constructed the DCF metabolic pathway. In addition, we evaluated the degradation and detoxification effects of the BMO composite on DCF-containing urban lake water and on biotoxicity in zebrafish embryos. Based on our findings, we proposed a mechanism for oxidative degradation of DCF by associative oxygenases and FRs.

Chrysin mitigates diclofenac-induced hepatotoxicity by modulating oxidative stress, apoptosis, autophagy and endoplasmic reticulum stress in rats

BACKGROUND

Diclofenac (DF) is a non-steroidal anti-inflammatory drug (NSAID) generally prescribed for the treatment of pain. In spite of the widespread use of DF, hepatotoxicity has been reported after its administration. The current study discloses new evidence as regards of the curative effects of chrysin (CHR) on DF-induced hepatotoxicity by regulating oxidative stress, apoptosis, autophagy, and endoplasmic reticulum (ER) stress.

METHODS

The animals were separated into five different groups. Group-I was in control. Group-II received CHR-only (50 mg/kg bw, p.o.) on all 5 days. Group-III received DF-only (50 mg/kg bw, i.p.) on 4th and 5th day. Group-IV received DF (50 mg/kg bw) + CHR (25 mg/kg, bw) and group-V received DF (50 mg/kg, bw) + CHR (50 mg/kg, bw) for 5 days.

RESULTS

DF injection was associated with increased MDA while reduced GSH level, activities of superoxide dismutase, glutathione peroxidase, and catalase and mRNA levels of HO-1 and Nrf2 in the liver. DF injection caused apoptosis and autophagy in the liver by up-regulating caspase-3, Bax, LC3A, and LC3B levels and down-regulating Bcl-2. DF also caused ER stress by increasing mRNA transcript levels of ATF-6, IRE1, PERK, and GRP78. Additionally, it was observed that DF administration up-regulated MMP2 and MMP9. However, treatment with CHR at a dose of 25 and 50 mg/kg considerably ameliorated oxidative stress, apoptosis, autophagy, and ER stress in liver tissue.

CONCLUSION

Overall, the data of this study indicate that liver damage associated with DF toxicity could be ameliorated by CHR administration.

Enhanced removal of diclofenac via coupling Pd catalytic and microbial processes in a H2-based membrane biofilm reactor: Performance, mechanism and biofilm microbial ecology

Diclofenac (DCF) is a most widely used anti-inflammatory drug, which has attracted worldwide attention given its low biodegradability and ecological damage, especially toxic effects on mammals including humans. In this study, a H₂-based membrane biofilm reactor (H₂-MBfR) was constructed with well-dispersed Pd nanoparticles generated in situ. The Pd-MBfR was applied for catalytic reductive dechlorination of DCF. In batch tests, DCF concentration had significantly effect on the rate and extent DCF removal, and NO₃^- had negative impact on DCF reductive dechlorination. Over 67% removal of 0.5 mg/L DCF and 99% removal of 10 mg/L NO₃^--N were achieved in 90 min, and the highest removal of 97% was obtained at 0.5 mg/L DCF in the absence of NO₃^-. Over 78 days of continuous operation, the highest steady-state removal flux of DCF was 0.0097 g/m²/d. LC-MS analysis indicated that the major product was 2-anilinephenylacetic acid (APA). Dechlorination was the main removal process of DCF mainly owing to the catalytic reduction by PdNPs, microbial reduction, and the synergistic reduction of microbial and PdNPs catalysis using direct delivery of H₂. Moreover, DCF reductive Dechlorination shifted the microbial community in the biofilms and Sporomusa was responsible for DCF degradation. In summary, this work expands a remarkable feasibility of sustainable catalytic removal of DCF.

Blue TiO2 nanotube electrocatalytic membrane electrode for efficient electrochemical degradation of organic pollutants

In this study, a Ti³⁺-doped TiO₂ porous membrane (Blue TiO₂/Ti) was fabricated and employed for electrochemical degradation of organic pollutants in the single-pass flow-through mode. Characterizations including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microcopy (SEM) and energy dispersive spectroscopy (EDS) verified that Ti³⁺-doped anatase TiO₂ with nanotube structures was successfully prepared. Electrochemical analysis including linear sweep voltammetry (LSV), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and electrochemical active surface area (ESA) revealed higher oxygen evolution potential (OEP, 2.23 V vs. Ag/AgCl), larger redox peak current, lower impedance and larger ESA (69 cm²/cm²) of Blue TiO₂/Ti compared to the Ti and TiO₂/Ti membranes. The effects of current density, flow rate and solution environment on the removal of methylene blue (MB) were investigated. The removal rates of various organic pollutants including sulfamethoxazole (SMX), methyl orange (MO), bisphenol A (BPA) and MB could reach 92.2%-99.5%. The quenching experiment proved that hydroxyl radicals (•OH) played the major role in the Blue TiO₂/Ti based electrochemical system. Furthermore, the degradation pathways of two typical pollutants (SMX and MB) were proposed by analyzing the oxidation products with liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS), with the assistance of orbital-weighted Fukui index (f_w⁰ and f_w^-) obtained through Density Functional Theory (DFT) calculations. Moreover, toxicity indexes of the oxidation products were obtained and compared to the parent SMX and MB using Toxicity Estimation Software Tool (TEST) software. Finally, the long-term operation performance of the Blue TiO₂/Ti membrane was evaluated.

Mixed Contaminants: Occurrence, Interactions, Toxicity, Detection, and Remediation

The ever-increasing rate of pollution has attracted considerable interest in research. Several anthropogenic activities have diminished soil, air, and water quality and have led to complex chemical pollutants. This review aims to provide a clear idea about the latest and most prevalent pollutants such as heavy metals, PAHs, pesticides, hydrocarbons, and pharmaceuticals—their occurrence in various complex mixtures and how several environmental factors influence their interaction. The mechanism adopted by these contaminants to form the complex mixtures leading to the rise of a new class of contaminants, and thus resulting in severe threats to human health and the environment, has also been exhibited. Additionally, this review provides an in-depth idea of various in vivo, in vitro, and trending biomarkers used for risk assessment and identifies the occurrence of mixed contaminants even at very minute concentrations. Much importance has been given to remediation technologies to understand our current position in handling these contaminants and how the technologies can be improved. This paper aims to create awareness among readers about the most ubiquitous contaminants and how simple ways can be adopted to tackle the same.

Synthesis and Characterization of a Magnetic Carbon Nanofiber Derived from Bacterial Cellulose for the Removal of Diclofenac from Water

Engineering and synthesis of novel materials are vital for removing emerging pollutants, such as pharmaceuticals from contaminated water. In this study, a magnetic carbon nanofiber (MCF) fabricated from bacterial cellulose was tested for the adsorption of diclofenac from water. The physical and chemical properties of the synthesized adsorbent were examined by field emission scanning electron microscopy (FESEM), field emission transmission electron microscopy (FETEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) analysis, energy-dispersive X-ray spectroscopy (EDS), a vibrating sample magnetometer (VSM), Raman spectroscopy, and Fourier transform infrared (FTIR) spectroscopy. The characterization results showed that the MCF is a carbon nanofiber with a three-dimensional interconnect network, forming a porous material (mesopores and macropores) with a specific surface area of 222.3 m²/g. The removal of diclofenac (10 mg/L) by the MCF (0.75 g/L) was efficient (93.2%) and fast (in 20 min). According to the Langmuir isotherm model fitting, the maximum adsorption capacity of the MCF was 43.56 mg/g. Moreover, continuous adsorption of diclofenac onto MCF was investigated in a fixed-bed column, and the maximum adsorption capacity was found to be 67 mg/g. The finding of this research revealed that the MCF could be a promising adsorbent used to remove diclofenac from water, while it can be easily recovered by magnetic separation.

Degradation of diclofenac via sequential reduction-oxidation by Ru/Fe modified biocathode dual-chamber bioelectrochemical system: Performance, pathways and degradation mechanisms

A sequential reduction-oxidation for DCF degradation was proposed by alternating anaerobic/aerobic conditions at Ru/Fe-biocathode in a dual-chamber bioelectrochemical system (BES). Results showed that Ru/Fe-electrode was successfully fabricated by in-situ electro-deposition, which was rough and uniformly distributed with Ru⁰ and Fe⁰ particles. The morphologic changing and biocompatibility were favorable to increase the surface area and enhance microbial adhesion on Ru/Fe-electrode. At an applied voltage of 0.6 V, the potential and impedance of Ru/Fe-biocathode were -0.80 V and 26 Ω, respectively, lower than that of carbon-felt-biocathode. It led to a higher DCF degradation efficiency of 93.2% under anaerobic conditions, which was superior to that of 88.0% under aerobic conditions. Using NaHCO₃ as carbon source, DCF removal efficiency increased with increasing applied voltage, but decreased with increasing initial DCF concentration. Thirteen intermediates were measured, and two degradation pathways were proposed, among which sequential reduction-oxidation of DCF was the main pathway, dechlorination intermediates were first generated by [H] attacked under anaerobic conditions, further oxidized by microbes and OH attacked under aerobic conditions, achieving 69.6% of mineralization. After 4 d of reaction, microcystis aeruginosa growth inhibition rate decreased from 22.9 to 8.0%, signifying a significant reduction in biotoxicity. Bacteria (e.g. Nitrobacter, Nitrosomonas, Pseudofulvimonas, Aquamicrobium, Sulfurvermis, Lentimicrobiaceae, Anaerobineaceae, Bacteroidales, Hydrogenedensaceae, Dethiosulfatibacter and Azoarcus) for DCF degradation were enriched in Ru/Fe-biocathode. Microbes in Ru/Fe-biocathode had established defense mechanisms to acclimate to the unfriendly environment, while Ru/Fe-biocathode possessed higher nitrification and denitrification activities than carbon-felt-biocathode, and Ru/Fe-biocathode might be of aerobic and anaerobic biodegradation activities. DCF could be mineralized by the synergistic reaction between Ru/Fe and bacteria under sequential anaerobic/aerobic conditions.

Bioremediation of micropollutants using living and non-living algae - Current perspectives and challenges

The emergence and continual accumulation of industrial micropollutants such as dyes, heavy metals, organic matters, and pharmaceutical active compounds (PhACs) in the ecosystem pose an alarming hazard to human health and the general wellbeing of global flora and fauna. To offer eco-friendly solutions, living and non-living algae have lately been identified and broadly practiced as promising agents in the bioremediation of micropollutants. The approach is promoted by recent findings seeing better removal performance, higher efficiency, surface area, and binding affinity of algae in various remediation events compared to bacteria and fungi. To give a proper and significant insight into this technology, this paper comprehensively reviews its current applications, removal mechanisms, comparative efficacies, as well as future outlooks and recommendations. In conducting the review, the secondary data of micropollutants removal have been gathered from numerous sources, from which their removal performances are analyzed and presented in terms of strengths, weaknesses, opportunities, and threats (SWOT), to specifically examine their suitability for selected micropollutants remediation. Based on kinetic, isotherm, thermodynamic, and SWOT analysis, non-living algae are generally more suitable for dyes and heavy metals removal, meanwhile living algae are appropriate for removal of organic matters and PhACs. Moreover, parametric effects on micropollutants removal are evaluated, highlighting that pH is critical for biodegradation activity. For selective pollutants, living and non-living algae show recommendable prospects as agents for the efficient cleaning of industrial wastewaters while awaiting further supporting discoveries in encouraging technology assurance and extensive applications.